This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: IXDP425 redboot problem
- From: Eric BENARD / Free <ebenard at free dot fr>
- To: "Zhen Ma" <zhma03 at hotmail dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Sat, 28 Feb 2004 09:49:55 +0100
- Subject: Re: [ECOS] IXDP425 redboot problem
- References: <SEA1-F21EXUIEAOeIiG000002ca@hotmail.com>
Le Samedi 28 Février 2004 04:41, Zhen Ma a écrit :
> Hi,
>
> I connect my PC serial port to UART0, and power cycle the IXDP425 board.
> But nothing happened, the hex remained 0000 (it should turn to 0001 when
> using the default redboot flash) and the minicom console does not show
> anything(no Redboot > ) I am pretty sure my minicom configuration is
> correct and I followed the direction on the Quick Start Guide from Intel.
>
> Can anybody give me some help, if you have some idea about this problem?
>
I had the same problem : pressing (a little :-) on the CPU and checking that
the screws are properly fixed solved the problem.
Eric
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss