This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Intel FLASH 28F160C3B
- From: "Vinayagam" <vinayagam at icantek dot com>
- To: "hao" <hao at hao dot dns2go dot com>, <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 18 Feb 2004 15:59:03 +0900
- Subject: Re: [ECOS] Intel FLASH 28F160C3B
- References: <3FFD4EAE.50006@elatec.si> <3FFD6AE2.805@usd.com> <001b01c3f5d9$26dbc030$5800a8c0@HaoTseng>
Hi All,
I am working on Intel FLASH 28F160C3B Chipset Device driver.
I have modified "28fxxx port" to support 28F160C3B. I have compiled and
Installed in my system using ROMRAM Startup Type.
When I am try to initialize the FLASH using "fis init" command I am getting
the following message:
"---------------------------------------------------------------------------
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
Warning: device contents not erased, some blocks may not be usable
... Unlock from 0x501f0000-0x50200000: .
... Erase from 0x501f0000-0x50200000:
Error erasing FIS directory at 0x501f0000: Device reports low voltage
... Lock from 0x501f0000-0x50200000: .
-------------------------------------------------------------------------"
Did anyone come across this type of error..?
Please guide me to solve this problem.
Thanks in Advance.
Regards,
Vinayagam.M
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss