This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: about porting ecos in S3C4510B development board
- From: Jonathan Larmour <jifl at eCosCentric dot com>
- To: Jay Foster <jay dot foster at systech dot com>
- Cc: ying_hu at alliedtelesyn dot com, ecos-discuss at sources dot redhat dot com
- Date: Thu, 12 Feb 2004 03:29:17 +0000
- Subject: Re: [ECOS] about porting ecos in S3C4510B development board
- References: <80B97DE95AEED311BA580050047FE98494F909@mail.systech.com>
Jay Foster wrote:
I ported RedBoot to the (my) SNDS100 board more than a year ago. I remember
modifying the HAL startup code to get the SDRAM configuration correct, and
added a flash driver (for the Winbond w29eexxx devices). I submitted
patches for these, but much of it never made it into the repository. I
don't know if all SNDS100 boards have the same flash devices or not, so this
flash driver may not work for your board. I suggest searching the eCos
archives. I have an update to the winbond w29eexxx flash driver that allows
it to work with eCos, but I have never submitted it, since there seemed to
be no interest.
If you can submit it to bugzilla as per
http://ecos.sourceware.org/patches.html you can be sure it won't be
forgotten - once in there it will be in the system and tracked.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
Visit us at Embedded World 2004, Nürnberg, Germany, 17-19 Feb, Stand 12-449
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss