This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
redboot w/o ether-related codes.
- From: "Tokutaro Nishioka" <nishioka at activebrains dot co dot jp>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Tue, 29 Jul 2003 16:14:07 +0900
- Subject: [ECOS] redboot w/o ether-related codes.
Hi all,
I'm trying to run redboot (included in eCos v2.0)
upon MIPS based board which provides RTL-8019AS
(almost same as NS-DP83902a) ethernet controller.
I wrote definitions in ecos.db, introduced codes from
~/packages/devs/eth/ns/dp83902a/*,
and I edit CDL files for these (LANC & board).
Then I run 'ecosconfig', and run 'make'.
Compiling result is OK, also linking result is OK.
I can make dis-assemble file from ./install/bin/redboot.elf.
When I see the dis-assemble file, all the ether-related symbols
and codes (such as 'eth_drv_init' etc...) are lacked !
Off cource, these ether-related symbols are existing in
'./install/lib/libtarget.a' library file,
but they are NOT linked within redboot.elf.
I checked generated 'ecos.ecc' and confirmed that ether-related
valiables within it are ENABLED.
I also do same things for 'ocelot' board as experiments of my own,
it properly contains the ether-related symboles and codes.
What is the problem?
I think macro-symboles or something I don't know yet
are NOT set correctly...
Please teach me or give me some hints...
Thanks
regards
T.Nishioka
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss