This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.
Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index] Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
how breakpoint instruction execute
Problem building with networking for i386
#include <new> in mqueue.cxx
#include each other
(ecos)-problem
(gdb) Couldn't establish connection to remote target
50% PACKET loss when I ping to the Board.
=?GB2312?B?u/nS8svjt6jIw7j20NS7r0ZMQVNItPPP1Mnxzf4=?=
Rép. : at91 hal
Rép. : Re: #include <new> in mqueue.cxx
[patch] flash_am29xxxxx.inl
[patch] net/eth_drv.c
_flash_xxx() in flash_am29xxxxx.inl
about layout of code
Allocate memory from new section
approch to build eCos applications with autotools.
arguments to main
Arm interrupt vector table
ARM-elf cross compiling error
arm-elf-gcc
arm-gdb-error
arm-simulator
ARM7 problem with ldr assembly instruction
at91 hal
beginner question
Big endian ARM HAL_WRITE_UINT8 problem
Big endian ARM HAL_WRITE_UINT8 problem (ecos 1.3.1)
bridge in LWIP ?
Building a New Tree for EB40
Building eCos on a I686 for a Ix86 Target
C++ STL and ecos
code fatal error!
code questions:
compact flash - slightly off topic
compile error
Compiler bug (arm-elf-gcc)?
Couldn't start user program with the old ecos repository.
crc16 - CCITT
cyg_user_start limitations
cyg_user_start() in a library
CYGPKG_SDL: there are no version subdirectories
debug method
diag_printf
diag_printf problem
DiskOnChip flash support
DNS code doesn't work on big-endian machine.
Driver can't set multi-cast mode
driver support for multicast
DSR problem
dsr-list NULL
e7t crash
e7t write problem
EB40 standalone application
EB40A port is done!
eb40a RIP
eb40a target submitted
ECOS and simulators
eCos Build Problem AGAIN
eCos CookBook documentation project?
ecos ping 50% packet loss solved temporarily -- thanks to ecos-discuss
ecos port 8260
eCos pre-v2.0
ecos strerror (i386)
eCos THUMB support
Enable Thumb instruction set and interworking
errno problem building FreeBSD stack for viper
Expediteur : Claude DENNERY ,
fatal error:set_priority()
fconfig in redboot (i386)
Fec driver TCP/IP with hello world application ---- problem
FEC interrupt registration problem
flash driver interface questions
FreeBSD-Stack not responding
Gary Thomas wrote:On Tue, 2002-07-09 at 07:36, brenner joel wrote:Hi all!I'm trying to use the SERIAL_GENERIC_16X5X serial driver for my custom target. (I've used arm/pid serial driver as example)When I compile the kernel I've the following error message:/home/brenner/ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x.c/home/brenner/ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x.c:213:44: cyg/io/arm_rms_extern_ser.inl: No such file or directoryand this is right because no inline file is placed cyg/io/.In the cdl file of rm_rms_extern_ser following paths are defined... define_proc { puts $::cdl_system_header "/***** serial driver proc output start *****/" puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/arm_rms_extern_ser.inl>" puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_extserial_arm_rms.h>" puts $::cdl_system_header "/***** serial driver proc output end *****/" }...witch are used to configure the SERIAL_GENERIC_16X5X driverMy question is: where I've to define a command witch copies devs/serial/arm/rms/current/include/arm_rms_extern_ser.inl to <cyg/io/arm_rms_extern_ser.inl> and what is this command?Just use the "include_dir" CDL command in the same file that hasthe "define proc". e.g. include_dir cyg/ioThis will cause the include files (from the package .../includedirectory) to be placed in the <cyg/io/...> directory."include_dir" CDL command is already there :................cdl_package CYGPKG_IO_EXT_SERIAL_ARM_RMS { display "RMS extern serial device drivers" parent CYGPKG_IO_SERIAL_DEVICES active_if CYGPKG_IO_SERIAL active_if CYGPKG_HAL_ARM_RMS requires CYGPKG_ERROR include_dir cyg/io description " This option enables the extern serial device drivers for the RMS ." doc redirect/ecos-device-drivers.html cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED { display "Generic 16x5x serial driver required" } define_proc { puts $::cdl_header "#define CYGPRI_IO_SERIAL_GENERIC_16X5X_STEP 4" } define_proc { puts $::cdl_system_header "/***** serial driver proc output start *****/"Re:Problem using SERIAL_GENERIC_16X5X serial driver
GDB
GPL - was: Re: EB40A port is done!
hello-world-segmentation fault
Help me please...
help on building error on ecos for e7T
how to implememt my assert and trace?
How to send questions on mailing list.
how to store the application into the flash memory? (ARM E7T)
I2C / SPI / HDLC driver
i386 eCos memory limit??
i386 new_net linker error...
i386 PC Target building problem
i386 PC target building problem on Windows2000 host
i386 with i82559 - Problems...
including flash
init_all_network_interfaces problem with new stack
Interrupt doesn't work witth the new ecos repository. ref: ARME7T board.
Interrupt Handler
LIBM problem with configtool 1.3.net
linux-synthetic-target
linux-synthetic-target-error
lwip& redboot question
make tests compile error for eb40
making and running tests
Malloc failure in ecos-1.3.1
malloc/new in DSRs
mcf5272c3 build error
memory layout tool for configtool2
Memory usage question about the new_net template
Message boxes - good/bad practices
microwindows under ecos 2.0
MIPS32 Cache FLUSH/STORE macros not defined for writeback caches?
MPC860 and IMMR location
MPC860: Enabling Datacache does not work
nested interrupt
new_net compilation failure
Newbie questions
No ROM monitor - How to test my code
nuova chat mutitasking
On
on "a.out,COFF,ELF"targets
On ecos interrupt process
On ecos startup squeue:copy vectors
On ecos's construction
On linker script
On RTC's isr!
On TRACE and INSTRUMENT of ecos
Opening ELF file in GDB (MIPS 32 Little endian)
OT: Strange sender address (was Re: profiler & memory leak detector)
Pb sur la flash
ping is resulting in 50% packet loss.
Ping problem in TCP/IP
port eCos to nios
power management question
PowerPC FEC interrupt handler problem
priority tasks and mutex
Problem in DHCP requests
problem of serial h/w buffer in ecos.
Problem Problem Problem (i386)
Problem using SERIAL_GENERIC_16X5X serial driver
problem with CF card not ready & problem with [xyz]modem
problem with memory allocation on SNDS-100 board
Problem with serial driver(i386 platform)
Problem with TCP/IP Stack
profiler & memory leak detector
Prototyping with the synthetic target.
Query
QUESTION - generic flash usage
Question about the data item meaning in Real-time characterization table. Ave, Min? under Confidence Thanks
Question about the eCOS characteristic?
Question about the ethernet hardware device driver?
Red Hat Flip-Flops on Future of eCos
RedBoot configuration file
Redboot Console
RedBoot file system code
redboot load command on ipaq
redboot load file broken in cvs
Redboot Question
Redboot TFTP problem.
Redboot Version
redboot?-samsung
registering serial devices
remote debugging
remote debugging Redboot
remote gdb debugging
samsunf-gcc
Samsung SNDS100 Question
samsung-gcc
Sequence of bring-up code on MBX860
Serial getc problem
serial port ARM e7t problem
Should I used init_all_network_interfaces???
Signal handling
simple eCos profiler
sorry-mistake
synthetic-target-error
TCP stack not delaying/piggybacking ACKs?
The whole flash architecture with jffs2 filesystem!
twothreads.c-error
typos in standalone eth_drv
Unable to execute twothreads.c
Undefined Instruction - gdb
Undefined reference to __divsi3
Unresolved conflict
Using GCC 3.0 with eCos
vmWare
Want to write a new device driver.
What is do_flash_init ?
What should be changed to have fis for my flash
Where in ecos is the external interrupt handler routine.
Where to add diagnostic routines in redboo?
why STACK_FRAME_PPC_SIZE was defined 56?
Re: #include <new> in mqueue.cxx
Re: (ecos)-problem
Re: (gdb) Couldn't establish connection to remote target
Re: =?gb2312?b?u/nS8svjt6jIw7j20NS7r0ZMQVNItPPP1Mnxzf4=?=
Re: [patch] flash_am29xxxxx.inl
Re: [patch] net/eth_drv.c
Re: _flash_xxx() in flash_am29xxxxx.inl
Re: arguments to main
RE: Arm interrupt vector table
Re: arm-elf-gcc
Re: arm-gdb-error
Re: arm-simulator
Re: ARM7 problem with ldr assembly instruction
AW: #include <new> in mqueue.cxx
AW: compile error
AW: crc16 - CCITT
AW: memory layout tool for configtool2
Re: Big endian ARM HAL_WRITE_UINT8 problem
Re: Big endian ARM HAL_WRITE_UINT8 problem (ecos 1.3.1)
RE: build error (Invalid token in expression)
Re: Building a New Tree for EB40
Re: Building eCos on a I686 for a Ix86 Target
Re: code fatal error!
RE: code questions:
Re: compact flash - slightly off topic
Re: cyg_user_start limitations
Re: cyg_user_start() in a library
Re: cygpcre.dll solved?
Re: Driver can't set multi-cast mode
RE: DSR problem
Re: e7t crash
RE: e7t write problem
Re: EB40 standalone application
Re: EB40A port is done!
RE: eb40a RIP
Re: eb40a target submitted
Re: ecos for ATLAS (MIPS 4Kc)
Re: ecos ping 50% packet loss solved temporarily -- thanksto ecos-discuss
Re: ecos problem
Re: errno problem building FreeBSD stack for viper
Re: ezmlm warning
Re: fatal error:set_priority()
Re: fconfig in redboot (i386)
Re: Fec driver TCP/IP with hello world application ---- problem
Re: FreeBSD-Stack not responding
Re: Re: FreeBSD-Stack not responding (Update)
Re: GDB stubs problems ARM/AT91/EB40 -
Re: GPL - was: Re: EB40A port is done!
Re: Help me please...
Re: help on building error on ecos for e7T
Re: Hi Please See to my problem in eCos
RE: how breakpoint instruction execute
how to add net package
Re: I need some clarifications regarding ecos
Re: i386 PC target building problem on Windows2000 host
Re: i386 with i82559 - Problems...
Re: including flash
Re: init_all_network_interfaces problem with new stack
Re: Interrupt doesn't work witth the new ecos repository. ref: ARME7T board.
RE: Interrupt Handler
Re: Latest eCos CVS docs with search facility
Re: lwip& redboot question
Re: make tests compile error for eb40
Re: making and running tests
Re: Malloc failure in ecos-1.3.1
Re: malloc/new in DSRs
Re: memory layout tool for configtool2
Re: microwindows under ecos 2.0
Re: MPC860 and IMMR location
Re: nested interrupt
Re: new_net compilation failure
Re: Newbie questions
Re: No ROM monitor - How to test my code
Re: on "a.out,COFF,ELF"targets
Re: On ecos exception process
RE: On RTC's isr!
RE: OT: Strange sender address (was Re: profiler & memory leak detector)
Re: OT: Strange sender address (was Re: profiler &memory leak detector)
RE: ping is resulting in 50% packet loss.
Re: Ping problem in TCP/IP
RE: port eCos to nios
Re: PowerPC FEC interrupt handler problem
Re: priority tasks and mutex
RE: Problem building with networking for i386
Re: Problem in DHCP requests
Re: Problem in DHCP requests Where is arpcom???
Re: Problem Problem Problem (i386)
Re: Problem using SERIAL_GENERIC_16X5X serial driver
Re: problem with CF card not ready & problem with [xyz]modem
Re: problem with memory allocation on SNDS-100 board
RE: profiler & memory leak detector
Re: Prototyping with the synthetic target.
RE: Query
Re: QUESTION - generic flash usage
Fw: Re: Question about the ethernet hardware device driver?
Re: RedBoot configuration file
Re: Redboot Console
Re: Redboot DHCP and gateway support
Re: RedBoot file system code
Re: redboot load command on ipaq
Re: redboot load file broken in cvs
Re: Redboot Question
Re: remote debugging
Re: remote gdb debugging
Re: samsunf-gcc
Re: samsung-gcc
RE: Serial getc problem
RE: serial port ARM e7t problem
Re: sid
Re: Signal handling
Re: simple eCos profiler
Re: SNDS Ethernet
Re: source code credits
Re: synthetic-target-error
Re: TCP stack not delaying/piggybacking ACKs?
Re: twothreads.c-error
RE: Undefined reference to __divsi3
Re: Unresolved conflict
RE: Using GCC 3.0 with eCos
Re: vmWare
RE: Want to write a new device driver.
Re: Where is arpcom??? how to add this header file
Re: Where to add diagnostic routines in redboo?
RE: why STACK_FRAME_PPC_SIZE was defined 56?
Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index] Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]