This is the mail archive of the
cygwin@cygwin.com
mailing list for the Cygwin project.
Re: sshd setup question
You mentioned that it is not reaching the server through ssh, is there any
way I can find out where the problem occurs at? I am using a command line of
:
ssh -p 422 localhost
to do this, I am not sure where in the networking the problem might lie at,
is there any way that I can find out, or assist you in finding out?
The reason I was trying it with inetd, partly because it mentioned it on the
website of yours, is because I have it working correctly for a couple of
other services that are part of cygwin.
One discrepancy I found between the website and the ssh-host-config file
that was installed on my machine is
file:
chown system.system /var/empty
website
chown system:system /var/empty
How should this be? If you notice the website has a colon on that line, the
file has a period on that line.
The website I am referring to is: http://tech.erdelynet.com/cygwin-sshd.html
--
Dan Adams - dan@infochi.com
http://www.infochi.com
"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1">news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
> You're not reaching the server. The read of the basic version
identification
> is failing. If the client and the server can't understand what version of
> ssh is running on either end, they don't talk. So you're not reaching the
> server through ssh.
>
> Sorry I don't know much about setting up ssh under inetd. Is there a
reason
> not to set it up as the documentation suggests? I can vouch for things
> working that way.
>
> Larry
>
>
> At 06:38 PM 9/1/2003, Dan Adams you wrote:
> >Thanks for the comment about cygrunsrv and the method of removing service
> >from win2k That worked well
> >
> >Since I have inetd working well. I have a telnet server and also a FTP
> >server, but neither is available outside of my firewall. I thought that I
> >would try and see if I could use the sshd server that I just setup via
the
> >inetd thing. When I did this, I got an error message of:
> >
> >ssh_exchange_identification: read: Connection reset by peer
> >
> >What would this mean? This is the only error message that I have been
> >getting from the ssh deamon when I try and connect, and even before I ran
> >that setup script.
> >
> >Dan Adams - dan@infochi.com
> >http://www.infochi.com
> >
> >
> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >5.1.0.14.0.20030901180444.01f69c90@127.0.0.1">news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
> >> OK, visit <http://cygwin.com/problems.html> and provide the requested
> >info.
> >> Also, send along (attached too) your /etc/passwd and /etc/group files.
> >The
> >> actual transcript of your attempt to run chown would be helpful too.
> >>
> >> cygrunsrv -E <service name> followed by cygrunsrv -R <service name>
will
> >> stop and remove a service.
> >>
> >> Larry
> >>
> >>
> >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
> >> >I tried the directions at the site, and when it did the chown
> >system.system
> >> >/var/empty command. It errors out, saying that the user is unknown. It
> >seems
> >> >to not want to start the service after that point. Any more
suggestions.
> >> >Also does anyone know how to remove a service from the listong in
Win2k
> >once
> >> >it is no longer desired. I am hoping to change from telnet/ftp to ssh
> >access
> >> >which means I would be able to get rid of the service of inetd that is
in
> >my
> >> >win2k control panel thing.
> >> >
> >> >Dan Adams - dan@infochi.com
> >> >http://www.infochi.com
> >> >
> >> >
> >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> >5.1.0.14.0.20030901172200.01f49928@127.0.0.1">news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> >> >> >Dan Adams" wrote
> >> >> >
> >> >> >> Does anyone know if there is either a script that will automate
the
> >> >> >process
> >> >> >> of setting up an ssh server? Or is there a tutorial setup page?
> >> >> >
> >> >> >http://tech.erdelynet.com/cygwin-sshd.html
> >> >>
> >> >>
> >> >> And please follow-up with any questions generated from following the
> >> >> directions at this site with tech.erdelynet.com. The supported
> >> >information
> >> >> for setting up Cygwin's OpenSSH distribution is
> >> >> /usr/doc/Cygwin/openssh-*.README. It's the only source of
information
> >> >this
> >> >> list will entertain questions about.
> >> >>
> >> >> Thanks,
> >> >>
> >> >>
> >> >> Larry Hall http://www.rfk.com
> >> >> RFK Partners, Inc. (508) 893-9779 - RFK Office
> >> >> 838 Washington Street (508) 893-9889 - FAX
> >> >> Holliston, MA 01746
> >> >>
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> >--
> >> >Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
> >> >Problem reports: http://cygwin.com/problems.html
> >> >Documentation: http://cygwin.com/docs.html
> >> >FAQ: http://cygwin.com/faq/
> >>
> >>
> >
> >
> >
> >
> >--
> >Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
> >Problem reports: http://cygwin.com/problems.html
> >Documentation: http://cygwin.com/docs.html
> >FAQ: http://cygwin.com/faq/
>
> --
> Larry Hall http://www.rfk.com
> RFK Partners, Inc. (508) 893-9779 - RFK Office
> 838 Washington Street (508) 893-9889 - FAX
> Holliston, MA 01746
>
>
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/