This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH V2 6/9] gas: add support for eBPF


This patch adds a port for the Linux kernel eBPF to the GNU assembler.
A testsuite and documentation updates are included.

gas/ChangeLog:

2019-05-22  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* configure.ac: Handle bpf-*-* targets.
	* configure.tgt (generic_target): Likewise.
	* configure: Regenerate.
	* Makefile.am (TARGET_CPU_CFILES): Add tc-bpf.c.
	(TARGET_CPU_HFILES): Add tc-bpf.h.
	* Makefile.in: Regenerated.
	* config/tc-bpf.c: New file.
	* config/tc-bpf.h: Likewise.
	* doc/Makefile.am (CPU_DOCS): Add c-bpf.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: set BPF.
	* doc/as.texi: Add eBPF contents.
	* doc/c-bpf.texi: New file.
	* testsuite/gas/bpf/alu.d: New file.
	* testsuite/gas/bpf/mem-be.d: Likewise.
	* testsuite/gas/bpf/mem.s: Likewise.
	* testsuite/gas/bpf/mem.d: Likewise.
	* testsuite/gas/bpf/lddw-be.d: Likewise.
	* testsuite/gas/bpf/lddw.s: Likewise.
	* testsuite/gas/bpf/lddw.d: Likewise.
	* testsuite/gas/bpf/jump-be.d: Likewise.
	* testsuite/gas/bpf/jump.s: Likewise.
	* testsuite/gas/bpf/jump.d: Likewise.
	* testsuite/gas/bpf/exit-be.d: Likewise.
	* testsuite/gas/bpf/exit.s: Likewise.
	* testsuite/gas/bpf/exit.d: Likewise.
	* testsuite/gas/bpf/call-be.d: Likewise.
	* testsuite/gas/bpf/call.s: Likewise.
	* testsuite/gas/bpf/call.d: Likewise.
	* testsuite/gas/bpf/bpf.exp: Likewise.
	* testsuite/gas/bpf/atomic-be.d: Likewise.
	* testsuite/gas/bpf/atomic.s: Likewise.
	* testsuite/gas/bpf/atomic.d: Likewise.
	* testsuite/gas/bpf/alu-be.d: Likewise.
	* testsuite/gas/bpf/alu32-be.d: Likewise.
	* testsuite/gas/bpf/alu32.s: Likewise.
	* testsuite/gas/bpf/alu32.d: Likewise.
	* testsuite/gas/bpf/alu.s: Likewise.
	* testsuite/gas/all/gas.exp: Introduce a nop_type for eBPF.
	* testsuite/gas/all/org-1.s: Support nop_type 6.
	* testsuite/gas/all/org-1.l: Updated to reflect changes in
	org-1.s.
---
 gas/ChangeLog                     |  45 +++++
 gas/Makefile.am                   |   2 +
 gas/Makefile.in                   |   6 +
 gas/config/tc-bpf.c               | 354 ++++++++++++++++++++++++++++++++++++
 gas/config/tc-bpf.h               |  51 ++++++
 gas/configure                     |  38 +++-
 gas/configure.ac                  |   6 +
 gas/configure.tgt                 |   1 +
 gas/doc/Makefile.am               |   1 +
 gas/doc/Makefile.in               |   2 +
 gas/doc/all.texi                  |   1 +
 gas/doc/as.texi                   |  34 ++++
 gas/doc/c-bpf.texi                | 364 ++++++++++++++++++++++++++++++++++++++
 gas/testsuite/gas/all/gas.exp     |   3 +
 gas/testsuite/gas/all/org-1.l     |   2 +-
 gas/testsuite/gas/all/org-1.s     |   2 +
 gas/testsuite/gas/bpf/alu-be.d    |  59 ++++++
 gas/testsuite/gas/bpf/alu.d       |  58 ++++++
 gas/testsuite/gas/bpf/alu.s       |  51 ++++++
 gas/testsuite/gas/bpf/alu32-be.d  |  65 +++++++
 gas/testsuite/gas/bpf/alu32.d     |  64 +++++++
 gas/testsuite/gas/bpf/alu32.s     |  57 ++++++
 gas/testsuite/gas/bpf/atomic-be.d |  12 ++
 gas/testsuite/gas/bpf/atomic.d    |  11 ++
 gas/testsuite/gas/bpf/atomic.s    |   5 +
 gas/testsuite/gas/bpf/bpf.exp     |  38 ++++
 gas/testsuite/gas/bpf/call-be.d   |  19 ++
 gas/testsuite/gas/bpf/call.d      |  18 ++
 gas/testsuite/gas/bpf/call.s      |  11 ++
 gas/testsuite/gas/bpf/exit-be.d   |  11 ++
 gas/testsuite/gas/bpf/exit.d      |  10 ++
 gas/testsuite/gas/bpf/exit.s      |   2 +
 gas/testsuite/gas/bpf/jump-be.d   |  32 ++++
 gas/testsuite/gas/bpf/jump.d      |  31 ++++
 gas/testsuite/gas/bpf/jump.s      |  25 +++
 gas/testsuite/gas/bpf/lddw-be.d   |  18 ++
 gas/testsuite/gas/bpf/lddw.d      |  17 ++
 gas/testsuite/gas/bpf/lddw.s      |   6 +
 gas/testsuite/gas/bpf/mem-be.d    |  30 ++++
 gas/testsuite/gas/bpf/mem.d       |  29 +++
 gas/testsuite/gas/bpf/mem.s       |  24 +++
 41 files changed, 1606 insertions(+), 9 deletions(-)
 create mode 100644 gas/config/tc-bpf.c
 create mode 100644 gas/config/tc-bpf.h
 create mode 100644 gas/doc/c-bpf.texi
 create mode 100644 gas/testsuite/gas/bpf/alu-be.d
 create mode 100644 gas/testsuite/gas/bpf/alu.d
 create mode 100644 gas/testsuite/gas/bpf/alu.s
 create mode 100644 gas/testsuite/gas/bpf/alu32-be.d
 create mode 100644 gas/testsuite/gas/bpf/alu32.d
 create mode 100644 gas/testsuite/gas/bpf/alu32.s
 create mode 100644 gas/testsuite/gas/bpf/atomic-be.d
 create mode 100644 gas/testsuite/gas/bpf/atomic.d
 create mode 100644 gas/testsuite/gas/bpf/atomic.s
 create mode 100644 gas/testsuite/gas/bpf/bpf.exp
 create mode 100644 gas/testsuite/gas/bpf/call-be.d
 create mode 100644 gas/testsuite/gas/bpf/call.d
 create mode 100644 gas/testsuite/gas/bpf/call.s
 create mode 100644 gas/testsuite/gas/bpf/exit-be.d
 create mode 100644 gas/testsuite/gas/bpf/exit.d
 create mode 100644 gas/testsuite/gas/bpf/exit.s
 create mode 100644 gas/testsuite/gas/bpf/jump-be.d
 create mode 100644 gas/testsuite/gas/bpf/jump.d
 create mode 100644 gas/testsuite/gas/bpf/jump.s
 create mode 100644 gas/testsuite/gas/bpf/lddw-be.d
 create mode 100644 gas/testsuite/gas/bpf/lddw.d
 create mode 100644 gas/testsuite/gas/bpf/lddw.s
 create mode 100644 gas/testsuite/gas/bpf/mem-be.d
 create mode 100644 gas/testsuite/gas/bpf/mem.d
 create mode 100644 gas/testsuite/gas/bpf/mem.s

diff --git a/gas/Makefile.am b/gas/Makefile.am
index 6f4276a7ef..2e95409671 100644
--- a/gas/Makefile.am
+++ b/gas/Makefile.am
@@ -134,6 +134,7 @@ TARGET_CPU_CFILES = \
 	config/tc-arm.c \
 	config/tc-avr.c \
 	config/tc-bfin.c \
+	config/tc-bpf.c \
 	config/tc-cr16.c \
 	config/tc-cris.c \
 	config/tc-crx.c \
@@ -209,6 +210,7 @@ TARGET_CPU_HFILES = \
 	config/tc-arm.h \
 	config/tc-avr.h \
 	config/tc-bfin.h \
+	config/tc-bpf.h \
 	config/tc-cr16.h \
 	config/tc-cris.h \
 	config/tc-crx.h \
diff --git a/gas/Makefile.in b/gas/Makefile.in
index 252dff9a69..595295e555 100644
--- a/gas/Makefile.in
+++ b/gas/Makefile.in
@@ -402,6 +402,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -523,6 +524,7 @@ TARGET_CPU_CFILES = \
 	config/tc-arm.c \
 	config/tc-avr.c \
 	config/tc-bfin.c \
+	config/tc-bpf.c \
 	config/tc-cr16.c \
 	config/tc-cris.c \
 	config/tc-crx.c \
@@ -598,6 +600,7 @@ TARGET_CPU_HFILES = \
 	config/tc-arm.h \
 	config/tc-avr.h \
 	config/tc-bfin.h \
+	config/tc-bpf.h \
 	config/tc-cr16.h \
 	config/tc-cris.h \
 	config/tc-crx.h \
@@ -896,6 +899,8 @@ config/tc-avr.$(OBJEXT): config/$(am__dirstamp) \
 	config/$(DEPDIR)/$(am__dirstamp)
 config/tc-bfin.$(OBJEXT): config/$(am__dirstamp) \
 	config/$(DEPDIR)/$(am__dirstamp)
+config/tc-bpf.$(OBJEXT): config/$(am__dirstamp) \
+	config/$(DEPDIR)/$(am__dirstamp)
 config/tc-cr16.$(OBJEXT): config/$(am__dirstamp) \
 	config/$(DEPDIR)/$(am__dirstamp)
 config/tc-cris.$(OBJEXT): config/$(am__dirstamp) \
@@ -1151,6 +1156,7 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-arm.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-avr.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-bfin.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-bpf.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-cr16.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-cris.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-crx.Po@am__quote@
diff --git a/gas/config/tc-bpf.c b/gas/config/tc-bpf.c
new file mode 100644
index 0000000000..9318c3563b
--- /dev/null
+++ b/gas/config/tc-bpf.c
@@ -0,0 +1,354 @@
+/* tc-bpf.c -- Assembler for the Linux eBPF.
+   Copyright (C) 2019 Free Software Foundation, Inc.
+   Contributed by Oracle, Inc.
+
+   This file is part of GAS, the GNU Assembler.
+
+   GAS is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3, or (at your option)
+   any later version.
+
+   GAS is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with GAS; see the file COPYING.  If not, write to
+   the Free Software Foundation, 51 Franklin Street - Fifth Floor,
+   Boston, MA 02110-1301, USA.  */
+
+#include "as.h"
+#include "subsegs.h"
+#include "symcat.h"
+#include "opcodes/bpf-desc.h"
+#include "opcodes/bpf-opc.h"
+#include "cgen.h"
+#include "elf/common.h"
+#include "elf/bpf.h"
+#include "dwarf2dbg.h"
+
+const char comment_chars[]        = ";";
+const char line_comment_chars[] = "#";
+const char line_separator_chars[] = "`";
+const char EXP_CHARS[]            = "eE";
+const char FLT_CHARS[]            = "fFdD";
+
+/* The target specific pseudo-ops which we support.  */
+const pseudo_typeS md_pseudo_table[] =
+{
+    { NULL,         NULL,             0 }
+};
+
+/* ISA handling.  */
+static CGEN_BITSET *bpf_isa;
+
+
+
+/* Command-line options processing.  */
+
+enum options
+{
+  OPTION_LITTLE_ENDIAN = OPTION_MD_BASE,
+  OPTION_BIG_ENDIAN
+};
+
+struct option md_longopts[] =
+{
+  { "EL", no_argument, NULL, OPTION_LITTLE_ENDIAN },
+  { "EB", no_argument, NULL, OPTION_BIG_ENDIAN },
+  { NULL,          no_argument, NULL, 0 },
+};
+
+size_t md_longopts_size = sizeof (md_longopts);
+
+const char * md_shortopts = "";
+
+extern int target_big_endian;
+
+/* Whether target_big_endian has been set while parsing command-line
+   arguments.  */
+static int set_target_endian = 0;
+
+int
+md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED)
+{
+  switch (c)
+    {
+    case OPTION_BIG_ENDIAN:
+      set_target_endian = 1;
+      target_big_endian = 1;
+      break;
+    case OPTION_LITTLE_ENDIAN:
+      set_target_endian = 1;
+      target_big_endian = 0;
+      break;
+    default:
+      return 0;
+    }
+
+  return 1;
+}
+
+void
+md_show_usage (FILE * stream)
+{
+  fprintf (stream, _("\nBPF options:\n"));
+  fprintf (stream, _("\
+  --EL			generate code for a little endian machine\n\
+  --EB			generate code for a big endian machine\n"));
+}
+
+
+void
+md_begin (void)
+{
+  /* Initialize the `cgen' interface.  */
+
+  /* If not specified in the command line, use the host
+     endianness.  */
+  if (!set_target_endian)
+    {
+#ifdef WORDS_BIGENDIAN
+      target_big_endian = 1;
+#else
+      target_big_endian = 0;
+#endif
+    }
+
+  /* Set the ISA, which depends on the target endianness. */
+  bpf_isa = cgen_bitset_create (ISA_MAX);
+  if (target_big_endian)
+    cgen_bitset_set (bpf_isa, ISA_EBPFBE);
+  else
+    cgen_bitset_set (bpf_isa, ISA_EBPFLE);
+
+  /* Set the machine number and endian.  */
+  gas_cgen_cpu_desc = bpf_cgen_cpu_open (CGEN_CPU_OPEN_ENDIAN,
+                                         target_big_endian ?
+                                         CGEN_ENDIAN_BIG : CGEN_ENDIAN_LITTLE,
+                                         CGEN_CPU_OPEN_ISAS,
+                                         bpf_isa,
+                                         CGEN_CPU_OPEN_END);
+  bpf_cgen_init_asm (gas_cgen_cpu_desc);
+
+  /* This is a callback from cgen to gas to parse operands.  */
+  cgen_set_parse_operand_fn (gas_cgen_cpu_desc, gas_cgen_parse_operand);
+
+  /* Set the machine type. */
+  bfd_default_set_arch_mach (stdoutput, bfd_arch_bpf, bfd_mach_bpf);
+}
+
+valueT
+md_section_align (segT segment, valueT size)
+{
+  int align = bfd_get_section_alignment (stdoutput, segment);
+
+  return ((size + (1 << align) - 1) & -(1 << align));
+}
+
+
+/* Functions concerning relocs.  */
+
+/* The location from which a PC relative jump should be calculated,
+   given a PC relative reloc.  */
+
+long
+md_pcrel_from_section (fixS *fixP, segT sec)
+{
+  if (fixP->fx_addsy != (symbolS *) NULL
+      && (! S_IS_DEFINED (fixP->fx_addsy)
+          || (S_GET_SEGMENT (fixP->fx_addsy) != sec)
+          || S_IS_EXTERNAL (fixP->fx_addsy)
+          || S_IS_WEAK (fixP->fx_addsy)))
+    {
+        /* The symbol is undefined (or is defined but not in this section).
+         Let the linker figure it out.  */
+      return 0;
+    }
+
+  return fixP->fx_where + fixP->fx_frag->fr_address;
+}
+
+/* Write a value out to the object file, using the appropriate endianness.  */
+
+void
+md_number_to_chars (char * buf, valueT val, int n)
+{
+  if (target_big_endian)
+    number_to_chars_bigendian (buf, val, n);
+  else
+    number_to_chars_littleendian (buf, val, n);
+}
+
+arelent *
+tc_gen_reloc (asection *sec, fixS *fix)
+{
+  return gas_cgen_tc_gen_reloc (sec, fix);
+}
+
+/* Return the bfd reloc type for OPERAND of INSN at fixup FIXP.  This
+   is called when the operand is an expression that couldn't be fully
+   resolved.  Returns BFD_RELOC_NONE if no reloc type can be found.
+   *FIXP may be modified if desired.  */
+
+bfd_reloc_code_real_type
+md_cgen_lookup_reloc (const CGEN_INSN *insn ATTRIBUTE_UNUSED,
+		      const CGEN_OPERAND *operand,
+		      fixS *fixP)
+{
+  switch (operand->type)
+    {
+    case BPF_OPERAND_OFFSET16:
+      return BFD_RELOC_BPF_16;
+    case BPF_OPERAND_IMM32:
+      return BFD_RELOC_BPF_32;
+    case BPF_OPERAND_IMM64:
+      return BFD_RELOC_BPF_64;
+    case BPF_OPERAND_DISP16:
+      fixP->fx_pcrel = 1;
+      return BFD_RELOC_BPF_DISP16;
+    case BPF_OPERAND_DISP32:
+      fixP->fx_pcrel = 1;
+      return BFD_RELOC_BPF_DISP32;
+    default:
+      break;
+    }
+  return BFD_RELOC_NONE;
+}
+
+/* *FRAGP has been relaxed to its final size, and now needs to have
+   the bytes inside it modified to conform to the new size.
+
+   Called after relaxation is finished.
+   fragP->fr_type == rs_machine_dependent.
+   fragP->fr_subtype is the subtype of what the address relaxed to.  */
+
+void
+md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
+		 segT sec ATTRIBUTE_UNUSED,
+		 fragS *fragP ATTRIBUTE_UNUSED)
+{
+  as_fatal (_("convert_frag called"));
+}
+
+int
+md_estimate_size_before_relax (fragS *fragP ATTRIBUTE_UNUSED,
+                               segT segment ATTRIBUTE_UNUSED)
+{
+  as_fatal (_("estimate_size_before_relax called"));
+  return 0;
+}
+
+
+void
+md_apply_fix (fixS *fixP, valueT *valP, segT seg)
+{
+  /* Some fixups for instructions require special attention.  This is
+     handled in the code block below.  */
+  if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED)
+    {
+      int opindex = (int) fixP->fx_r_type - (int) BFD_RELOC_UNUSED;
+      const CGEN_OPERAND *operand = cgen_operand_lookup_by_num (gas_cgen_cpu_desc,
+                                                                opindex);
+      char *where;
+
+      switch (operand->type)
+        {
+        case BPF_OPERAND_DISP32:
+          /* eBPF supports two kind of CALL instructions: the so
+             called pseudo calls ("bpf to bpf") and external calls
+             ("bpf to kernel").
+
+             Both kind of calls use the same instruction (CALL).
+             However, external calls are constructed by passing a
+             constant argument to the instruction, whereas pseudo
+             calls result from expressions involving symbols.  In
+             practice, instructions requiring a fixup are interpreted
+             as pseudo-calls.  If we are executing this code, this is
+             a pseudo call.
+
+             The kernel expects for pseudo-calls to be annotated by
+             having BPF_PSEUDO_CALL in the SRC field of the
+             instruction.  But beware the infamous nibble-swapping of
+             eBPF and take endianness into account here.
+
+             Note that the CALL instruction has only one operand, so
+             this code is executed only once per instruction.  */
+          where = fixP->fx_frag->fr_literal + fixP->fx_where;
+          cgen_put_insn_value (gas_cgen_cpu_desc, (unsigned char *) where + 1, 8,
+                               target_big_endian ? 0x01 : 0x10);
+          /* Fallthrough.  */
+        case BPF_OPERAND_DISP16:
+          /* The PC-relative displacement fields in jump instructions
+             shouldn't be in bytes.  Instead, they hold the number of
+             64-bit words to the target, _minus one_.  */ 
+          *valP = (((long) (*valP)) - 8) / 8;
+          break;
+        default:
+          break;
+        }
+    }
+
+  /* And now invoke CGEN's handler, which will eventually install
+     *valP into the corresponding operand.  */
+  gas_cgen_md_apply_fix (fixP, valP, seg);
+}
+
+void
+md_assemble (char *str)
+{
+  const CGEN_INSN *insn;
+  char *errmsg;
+  CGEN_FIELDS fields;
+
+#if CGEN_INT_INSN_P
+  CGEN_INSN_INT buffer[CGEN_MAX_INSN_SIZE / sizeof (CGEN_INT_INSN_P)];
+#else
+  unsigned char buffer[CGEN_MAX_INSN_SIZE];
+  memset (buffer, 0, CGEN_MAX_INSN_SIZE); /* XXX to remove when CGEN
+                                             is fixed to handle
+                                             opcodes-in-words
+                                             properly.  */
+#endif
+
+  gas_cgen_init_parse ();
+  insn = bpf_cgen_assemble_insn (gas_cgen_cpu_desc, str, &fields,
+                                  buffer, &errmsg);
+
+  if (insn == NULL)
+    {
+      as_bad ("%s", errmsg);
+      return;
+    }
+
+  gas_cgen_finish_insn (insn, buffer, CGEN_FIELDS_BITSIZE (&fields),
+                        0, /* zero to ban relaxable insns.  */
+                        NULL); /* NULL so results not returned here.  */
+}
+
+void
+md_operand (expressionS *expressionP)
+{
+  gas_cgen_md_operand (expressionP);
+}
+
+
+symbolS *
+md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
+{
+  return NULL;
+}
+
+
+/* Turn a string in input_line_pointer into a floating point constant
+   of type TYPE, and store the appropriate bytes in *LITP.  The number
+   of LITTLENUMS emitted is stored in *SIZEP.  An error message is
+   returned, or NULL on OK.  */
+
+const char *
+md_atof (int type, char *litP, int *sizeP)
+{
+  return ieee_md_atof (type, litP, sizeP, FALSE);
+}
diff --git a/gas/config/tc-bpf.h b/gas/config/tc-bpf.h
new file mode 100644
index 0000000000..310cbc0a17
--- /dev/null
+++ b/gas/config/tc-bpf.h
@@ -0,0 +1,51 @@
+/* tc-bpf.h -- Header file for tc-ebpf.c.
+   Copyright (C) 2019 Free Software Foundation, Inc.
+   Contributed by Oracle, Inc.
+
+   This file is part of GAS, the GNU Assembler.
+
+   GAS is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3, or (at your option)
+   any later version.
+
+   GAS is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with GAS; see the file COPYING.  If not, write to the Free
+   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+   02110-1301, USA.  */
+
+#define TC_BPF
+
+#define LISTING_HEADER "BPF GAS "
+
+/* The target BFD architecture.  */
+#define TARGET_ARCH bfd_arch_bpf
+#define TARGET_MACH 0 /* The default.  */
+
+#define TARGET_FORMAT                                                   \
+  (target_big_endian ? "elf64-bpfbe" : "elf64-bpfle")
+
+/* This is used to set the default value for `target_big_endian'.  */
+#ifndef TARGET_BYTES_BIG_ENDIAN
+#define TARGET_BYTES_BIG_ENDIAN 0
+#endif
+
+/* .-foo gets turned into PC relative relocs.  */
+#define DIFF_EXPR_OK    1
+#define GAS_CGEN_PCREL_R_TYPE(R_TYPE) gas_cgen_pcrel_r_type (R_TYPE)
+
+/* Call md_pcrel_from_section(), not md_pcrel_from().  */
+#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from_section (FIXP, SEC)
+extern long md_pcrel_from_section (struct fix *, segT);
+
+/* We don't need to handle .word strangely.  */
+#define WORKING_DOT_WORD
+
+/* Values passed to md_apply_fix don't include the symbol value.  */
+#define MD_APPLY_SYM_VALUE(FIX) 0
+
diff --git a/gas/configure b/gas/configure
index 1aafa6b31d..8b921094c4 100755
--- a/gas/configure
+++ b/gas/configure
@@ -770,6 +770,7 @@ infodir
 docdir
 oldincludedir
 includedir
+runstatedir
 localstatedir
 sharedstatedir
 sysconfdir
@@ -867,6 +868,7 @@ datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
 docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
@@ -1119,6 +1121,15 @@ do
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
 
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
   -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1256,7 +1267,7 @@ fi
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
+		libdir localedir mandir runstatedir
 do
   eval ac_val=\$$ac_var
   # Remove trailing slashes.
@@ -1409,6 +1420,7 @@ Fine tuning of the installation directories:
   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
   --libdir=DIR            object code libraries [EPREFIX/lib]
   --includedir=DIR        C header files [PREFIX/include]
   --oldincludedir=DIR     C header files for non-gcc [/usr/include]
@@ -11343,7 +11355,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11346 "configure"
+#line 11358 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11449,7 +11461,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11452 "configure"
+#line 11464 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11836,7 +11848,7 @@ else
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -11882,7 +11894,7 @@ else
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -11906,7 +11918,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -11951,7 +11963,7 @@ else
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -11975,7 +11987,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -12831,6 +12843,16 @@ _ACEOF
 	done
 	;;
 
+      bpf)
+      	if test $this_target = $target ; then
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_ARCH "${arch}"
+_ACEOF
+
+	fi
+        using_cgen=yes
+        ;;
       epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | or1k)
 	using_cgen=yes
 	;;
diff --git a/gas/configure.ac b/gas/configure.ac
index 4b25b7ca36..34e114aa08 100644
--- a/gas/configure.ac
+++ b/gas/configure.ac
@@ -430,6 +430,12 @@ changequote([,])dnl
 	done
 	;;
 
+      bpf)
+      	if test $this_target = $target ; then
+	  AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
+	fi
+        using_cgen=yes
+        ;;
       epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | or1k)
 	using_cgen=yes
 	;;
diff --git a/gas/configure.tgt b/gas/configure.tgt
index 2d08c09de9..a4828c4cae 100644
--- a/gas/configure.tgt
+++ b/gas/configure.tgt
@@ -182,6 +182,7 @@ case ${generic_target} in
   d30v-*-*)				fmt=elf ;;
   dlx-*-*)				fmt=elf ;;
 
+  bpf-*-*)				fmt=elf ;;
   epiphany-*-*)				fmt=elf ;;
 
   fr30-*-*)				fmt=elf ;;
diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index 8ee7b2bedd..9bd50f4b77 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -52,6 +52,7 @@ CPU_DOCS = \
 	c-arm.texi \
 	c-avr.texi \
 	c-bfin.texi \
+	c-bpf.texi \
 	c-cr16.texi \
 	c-cris.texi \
 	c-csky.texi \
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index 9d0520ec8e..854ee9daef 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -364,6 +364,7 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
+runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
@@ -407,6 +408,7 @@ CPU_DOCS = \
 	c-arm.texi \
 	c-avr.texi \
 	c-bfin.texi \
+	c-bpf.texi \
 	c-cr16.texi \
 	c-cris.texi \
 	c-csky.texi \
diff --git a/gas/doc/all.texi b/gas/doc/all.texi
index e5617222ff..f76fdf779f 100644
--- a/gas/doc/all.texi
+++ b/gas/doc/all.texi
@@ -30,6 +30,7 @@
 @set ARM
 @set AVR
 @set Blackfin
+@set BPF
 @set CR16
 @set CRIS
 @set CSKY
diff --git a/gas/doc/as.texi b/gas/doc/as.texi
index f0d91d0f78..763c9d2263 100644
--- a/gas/doc/as.texi
+++ b/gas/doc/as.texi
@@ -40,6 +40,9 @@
 @ifset Blackfin
 @set Blackfin
 @end ifset
+@ifset BPF
+@set BPF
+@end ifset
 @ifset H8/300
 @set H8
 @end ifset
@@ -296,6 +299,11 @@ gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}.
    [@b{-mno-fdpic}]
    [@b{-mnopic}]
 @end ifset
+@ifset BPF
+
+@emph{Target BPF options:}
+   [@b{-EL}] [@b{-EB}]
+@end ifset
 @ifset CRIS
 
 @emph{Target CRIS options:}
@@ -1001,6 +1009,25 @@ the Blackfin processor family.
 
 @end ifset
 
+@ifset BPF
+
+@ifclear man
+@xref{BPF Options}, for the options available when @value{AS} is
+configured for the Linux kernel BPF processor family.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for
+the Linux kernel BPF processor family.
+@c man end
+@c man begin INCLUDE
+@include c-bpf.texi
+@c ended inside the included file
+@end ifset
+
+@end ifset
+
 @c man begin OPTIONS
 @ifset CRIS
 See the info pages for documentation of the CRIS-specific options.
@@ -7615,6 +7642,9 @@ subject, see the hardware manufacturer's manual.
 @ifset Blackfin
 * Blackfin-Dependent::		Blackfin Dependent Features
 @end ifset
+@ifset BPF
+* BPF-Dependent::		BPF Dependent Features
+@end ifset
 @ifset CR16
 * CR16-Dependent::              CR16 Dependent Features
 @end ifset
@@ -7802,6 +7832,10 @@ subject, see the hardware manufacturer's manual.
 @include c-bfin.texi
 @end ifset
 
+@ifset BPF
+@include c-bpf.texi
+@end ifset
+
 @ifset CR16
 @include c-cr16.texi
 @end ifset
diff --git a/gas/doc/c-bpf.texi b/gas/doc/c-bpf.texi
new file mode 100644
index 0000000000..a7a694f3bd
--- /dev/null
+++ b/gas/doc/c-bpf.texi
@@ -0,0 +1,364 @@
+@c Copyright (C) 2019 Free Software Foundation, Inc.
+@c This is part of the GAS manual.
+@c For copying conditions, see the file as.texinfo.
+
+@ifset GENERIC
+@page
+@node BPF-Dependent
+@chapter BPF Dependent Features
+@end ifset
+
+@ifclear GENERIC
+@node Machine Dependencies
+@chapter BPF Dependent Features
+@end ifclear
+
+@cindex BPF support
+@menu
+* BPF Options::                 Options
+* BPF Syntax::		        Syntax
+* BPF Opcodes::			Opcodes
+@end menu
+
+@node BPF Options
+@section Options
+@cindex BPF options (none)
+@cindex options for BPF (none)
+
+@c man begin OPTIONS
+@table @gcctabopt
+
+@cindex @option{-EB} command-line option, BPF
+@item -EB
+This option specifies that the assembler should emit big-endian eBPF.
+
+@cindex @option{-EL} command-line option, BPF
+@item -EL
+This option specifies that the assembler should emit little-endian
+eBPF.
+@end table
+
+Note that if no endianness option is specified in the command line,
+the host endianness is used.
+@c man end
+
+@node BPF Syntax
+@section Syntax
+@menu
+* BPF-Chars::                Special Characters
+* BPF-Regs::                 Register Names
+* BPF-Pseudo-Maps::	     Pseudo map fds
+@end menu
+
+@node BPF-Chars
+@subsection Special Characters
+
+@cindex line comment character, BPF
+@cindex BPF line comment character
+The presence of a @samp{;} on a line indicates the start of a comment
+that extends to the end of the current line.  If a @samp{#} appears as
+the first character of a line, the whole line is treated as a comment.
+
+@cindex statement separator, BPF
+Statements and assembly directives are separated by newlines.
+
+@node BPF-Regs
+@subsection Register Names
+
+@cindex BPF register names
+@cindex register names, BPF
+The eBPF processor provides ten general-purpose 64-bit registers,
+which are read-write, and a read-only frame pointer register:
+
+@table @samp
+@item %r0 .. %r9
+General-purpose registers.
+@item %r10
+Frame pointer register.
+@end table
+
+Some registers have additional names, to reflect their role in the
+eBPF ABI:
+
+@table @samp
+@item %a
+This is @samp{%r0}.
+@item %ctx
+This is @samp{%r6}.
+@item %fp
+This is @samp{%r10}.
+@end table
+
+@node BPF-Pseudo-Maps
+@subsection Pseudo Maps
+
+@cindex pseudo map fd, BPF
+The @samp{LDDW} instruction can take a literal pseudo map file
+descriptor as its second argument.  This uses the syntax
+@samp{%map_fd(N)} where @samp{N} is a signed number.
+
+For example, to load the address of the pseudo map with file
+descriptor @samp{2} in register @samp{r1} we would do:
+
+@smallexample
+        lddw %r1, %map_fd(2)
+@end smallexample
+
+@node BPF Opcodes
+@section Opcodes
+
+@cindex BPF opcodes
+@cindex opcodes for BPF
+In the instruction descriptions below the following field descriptors
+are used:
+
+@table @code
+@item %d
+Destination general-purpose register whose role is to be destination
+of an operation.
+@item %s
+Source general-purpose register whose role is to be the source of an
+operation.
+@item disp16
+16-bit signed PC-relative offset, measured in number of 64-bit words,
+minus one.
+@item disp32
+32-bit signed PC-relative offset, measured in number of 64-bit words,
+minus one.
+@item offset16
+Signed 16-bit immediate.
+@item imm32
+Signed 32-bit immediate.
+@item imm64
+Signed 64-bit immediate.
+@end table
+
+@subsubsection Arithmetic instructions
+
+The destination register in these instructions act like an
+accumulator.
+
+@table @code
+@item add %d, (%s|imm32)
+64-bit arithmetic addition.
+@item sub %d, (%s|imm32)
+64-bit arithmetic subtraction.
+@item mul %d, (%s|imm32)
+64-bit arithmetic multiplication.
+@item div %d, (%s|imm32)
+64-bit arithmetic integer division.
+@item mod %d, (%s|imm32)
+64-bit integer remainder.
+@item and %d, (%s|imm32)
+64-bit bit-wise ``and'' operation.
+@item or %d, (%s|imm32)
+64-bit bit-wise ``or'' operation.
+@item xor %d, (%s|imm32)
+64-bit bit-wise exclusive-or operation.
+@item lsh %d, (%s|imm32)
+64-bit left shift, by @code{%s} or @code{imm32} bits.
+@item rsh %d, (%s|imm32)
+64-bit right logical shift, by @code{%s} or @code{imm32} bits.
+@item arsh %d, (%s|imm32)
+64-bit right arithmetic shift, by @code{%s} or @code{imm32} bits.
+@item neg %d
+64-bit arithmetic negation.
+@item mov %d, (%s|imm32)
+Move the 64-bit value of @code{%s} in @code{%d}, or load @code{imm32}
+in @code{%d}.
+@end table
+
+@subsubsection 32-bit arithmetic instructions
+
+The destination register in these instructions act as an accumulator.
+
+@table @code
+@item add32 %d, (%s|imm32)
+32-bit arithmetic addition.
+@item sub32 %d, (%s|imm32)
+32-bit arithmetic subtraction.
+@item mul32 %d, (%s|imm32)
+32-bit arithmetic multiplication.
+@item div32 %d, (%s|imm32)
+32-bit arithmetic integer division.
+@item mod32 %d, (%s|imm32)
+32-bit integer remainder.
+@item and32 %d, (%s|imm32)
+32-bit bit-wise ``and'' operation.
+@item or32 %d, (%s|imm32)
+32-bit bit-wise ``or'' operation.
+@item xor32 %d, (%s|imm32)
+32-bit bit-wise exclusive-or operation.
+@item lsh32 %d, (%s|imm32)
+32-bit left shift, by @code{%s} or @code{imm32} bits.
+@item rsh32 %d, (%s|imm32)
+32-bit right logical shift, by @code{%s} or @code{imm32} bits.
+@item arsh32 %d, (%s|imm32)
+32-bit right arithmetic shift, by @code{%s} or @code{imm32} bits.
+@item neg32 %d
+32-bit arithmetic negation.
+@item mov32 %d, (%s|imm32)
+Move the 32-bit value of @code{%s} in @code{%d}, or load @code{imm32}
+in @code{%d}.
+@end table
+
+@subsubsection Endianness conversion instructions
+
+@table @code
+@item endle %d, (8|16|32)
+Convert the 8-bit, 16-bit or 32-bit value in @code{%d} to
+little-endian.
+@item endbe %d, (8|16|32)
+Convert the 8-bit, 16-bit or 32-bit value in @code{%d} to big-endian.
+@end table
+
+@subsubsection 64-bit load and pseudo maps
+
+@table @code
+@item lddw %d, imm64
+Load the given signed 64-bit immediate, or pseudo map descriptor, to
+the destination register @code{%d}.
+@item lddw %d, %map_fd(N)
+Load the address of the given pseudo map fd @emph{N} to the
+destination register @code{%d}.
+@end table
+
+@subsubsection Load instructions for socket filters
+
+The following instructions are intended to be used in socket filters,
+and are therefore not general-purpose: they make assumptions on the
+contents of several registers.  See the file
+@file{Documentation/networking/filter.txt} in the Linux kernel source
+tree for more information.
+
+Absolute loads:
+
+@table @code
+@item ldabsdw %d, %s, imm32
+Absolute 64-bit load.
+@item ldabsw %d, %s, imm32
+Absolute 32-bit load.
+@item ldabsh %d, %s, imm32
+Absolute 16-bit load.
+@item ldabsb %d, %s, imm32
+Absolute 8-bit load.
+@end table
+
+Indirect loads:
+
+@table @code
+@item ldinddw %d, %s, imm32
+Indirect 64-bit load.
+@item ldindw %d, %s, imm32
+Indirect 32-bit load.
+@item ldindh %d, %s, imm32
+Indirect 16-bit load.
+@item ldindb %d, %s, imm32
+Indirect 8-bit load.
+@end table
+
+@subsubsection Generic load/store instructions
+
+General-purpose load and store instructions are provided for several
+word sizes.
+
+Load to register instructions:
+
+@table @code
+@item ldxdw %d, [%s+offset16]
+Generic 64-bit load.
+@item ldxw %d, [%s+offset16]
+Generic 32-bit load.
+@item ldxh %d, [%s+offset16]
+Generic 16-bit load.
+@item ldxb %d, [%s+offset16]
+Generic 8-bit load.
+@end table
+
+Store from register instructions:
+
+@table @code
+@item stxdw [%d+offset16], %s
+Generic 64-bit store.
+@item stxw [%d+offset16], %s
+Generic 32-bit store.
+@item stxh [%d+offset16], %s
+Generic 16-bit store.
+@item stxb [%d+offset16], %s
+Generic 8-bit store.
+@end table
+
+Store from immediates instructions:
+
+@table @code
+@item stddw [%d+offset16], imm32
+Store immediate as 64-bit.
+@item stdw [%d+offset16], imm32
+Store immediate as 32-bit.
+@item stdh [%d+offset16], imm32
+Store immediate as 16-bit.
+@item stdb [%d+offset16], imm32
+Store immediate as 8-bit.
+@end table
+
+@subsubsection Jump instructions
+
+eBPF provides the following compare-and-jump instructions, which
+compare the values of the two given registers, or the values of a
+register and an immediate, and perform a branch in case the comparison
+holds true.
+
+@table @code
+@item ja %d,(%s|imm32),disp16
+Jump-always.
+@item jeq %d,(%s|imm32),disp16
+Jump if equal.
+@item jgt %d,(%s|imm32),disp16
+Jump if greater.
+@item jge %d,(%s|imm32),disp16
+Jump if greater or equal.
+@item jlt %d,(%s|imm32),disp16
+Jump if lesser.
+@item jle %d,(%s|imm32),disp16
+Jump if lesser or equal.
+@item jset %d,(%s|imm32),disp16
+Jump if signed equal.
+@item jne %d,(%s|imm32),disp16
+Jump if not equal.
+@item jsgt %d,(%s|imm32),disp16
+Jump if signed greater.
+@item jsge %d,(%s|imm32),disp16
+Jump if signed greater or equal.
+@item jslt %d,(%s|imm32),disp16
+Jump if signed lesser.
+@item jsle %d,(%s|imm32),disp16
+Jump if signed lesser or equal.
+@end table
+
+A call instruction is provided in order to perform calls to other eBPF
+functions, or to external kernel helpers:
+
+@table @code
+@item call (disp32|imm32)
+Jump and link to the offset @emph{disp32}, or to the kernel helper
+function identified by @emph{imm32}.
+@end table
+
+Finally:
+
+@table @code
+@item exit
+Terminate the eBPF program.
+@end table
+
+@subsubsection Atomic instructions
+
+Atomic exchange-and-add instructions are provided in two flavors: one
+for swapping 64-bit quantities and another for 32-bit quantities.
+
+@table @code
+@item xadddw [%d+offset16],%s
+Exchange-and-add a 64-bit value at the specified location.
+@item xaddw [%d+offset16],%s
+Exchange-and-add a 32-bit value at the specified location.
+@end table
diff --git a/gas/testsuite/gas/all/gas.exp b/gas/testsuite/gas/all/gas.exp
index abae8b15a6..4f0e98029c 100644
--- a/gas/testsuite/gas/all/gas.exp
+++ b/gas/testsuite/gas/all/gas.exp
@@ -427,6 +427,9 @@ dg-finish
 
 # Set $nop_type appropriately to indicate the NOP instruction mnemonic.
 case $target_triplet in {
+    { "bpf-*-*" } {
+        set nop_type 6
+    }
     { "mmix-*-*" } {
 	set nop_type 5
     }
diff --git a/gas/testsuite/gas/all/org-1.l b/gas/testsuite/gas/all/org-1.l
index 79932c0c91..e95dd18e47 100644
--- a/gas/testsuite/gas/all/org-1.l
+++ b/gas/testsuite/gas/all/org-1.l
@@ -1,2 +1,2 @@
 .*: Assembler messages:
-.*:22: Error: attempt to move \.org backwards
+.*:24: Error: attempt to move \.org backwards
diff --git a/gas/testsuite/gas/all/org-1.s b/gas/testsuite/gas/all/org-1.s
index 4d7b12bff8..7dccbe3d6f 100644
--- a/gas/testsuite/gas/all/org-1.s
+++ b/gas/testsuite/gas/all/org-1.s
@@ -9,6 +9,8 @@
 	mov	g0, g0
 	.elseif	nop_type == 5
 	set	$0, $0
+        .elseif nop_type == 6
+        mov	%r1,%r1
 	.else
 	nop
 	.endif
diff --git a/gas/testsuite/gas/bpf/alu-be.d b/gas/testsuite/gas/bpf/alu-be.d
new file mode 100644
index 0000000000..9aab7fb5b4
--- /dev/null
+++ b/gas/testsuite/gas/bpf/alu-be.d
@@ -0,0 +1,59 @@
+#as: --EB
+#source: alu.s
+#objdump: -dr
+#name: eBPF ALU64 instructions, big endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	07 20 00 00 00 00 02 9a 	add %r2,0x29a
+   8:	07 30 00 00 ff ff fd 66 	add %r3,-666
+  10:	07 40 00 00 7e ad be ef 	add %r4,0x7eadbeef
+  18:	0f 56 00 00 00 00 00 00 	add %r5,%ctx
+  20:	17 20 00 00 00 00 02 9a 	sub %r2,0x29a
+  28:	17 30 00 00 ff ff fd 66 	sub %r3,-666
+  30:	17 40 00 00 7e ad be ef 	sub %r4,0x7eadbeef
+  38:	1f 56 00 00 00 00 00 00 	sub %r5,%ctx
+  40:	27 20 00 00 00 00 02 9a 	mul %r2,0x29a
+  48:	27 30 00 00 ff ff fd 66 	mul %r3,-666
+  50:	27 40 00 00 7e ad be ef 	mul %r4,0x7eadbeef
+  58:	2f 56 00 00 00 00 00 00 	mul %r5,%ctx
+  60:	37 20 00 00 00 00 02 9a 	div %r2,0x29a
+  68:	37 30 00 00 ff ff fd 66 	div %r3,-666
+  70:	37 40 00 00 7e ad be ef 	div %r4,0x7eadbeef
+  78:	3f 56 00 00 00 00 00 00 	div %r5,%ctx
+  80:	47 20 00 00 00 00 02 9a 	or %r2,0x29a
+  88:	47 30 00 00 ff ff fd 66 	or %r3,-666
+  90:	47 40 00 00 7e ad be ef 	or %r4,0x7eadbeef
+  98:	4f 56 00 00 00 00 00 00 	or %r5,%ctx
+  a0:	57 20 00 00 00 00 02 9a 	and %r2,0x29a
+  a8:	57 30 00 00 ff ff fd 66 	and %r3,-666
+  b0:	57 40 00 00 7e ad be ef 	and %r4,0x7eadbeef
+  b8:	5f 56 00 00 00 00 00 00 	and %r5,%ctx
+  c0:	67 20 00 00 00 00 02 9a 	lsh %r2,0x29a
+  c8:	67 30 00 00 ff ff fd 66 	lsh %r3,-666
+  d0:	67 40 00 00 7e ad be ef 	lsh %r4,0x7eadbeef
+  d8:	6f 56 00 00 00 00 00 00 	lsh %r5,%ctx
+  e0:	77 20 00 00 00 00 02 9a 	rsh %r2,0x29a
+  e8:	77 30 00 00 ff ff fd 66 	rsh %r3,-666
+  f0:	77 40 00 00 7e ad be ef 	rsh %r4,0x7eadbeef
+  f8:	7f 56 00 00 00 00 00 00 	rsh %r5,%ctx
+ 100:	97 20 00 00 00 00 02 9a 	mod %r2,0x29a
+ 108:	97 30 00 00 ff ff fd 66 	mod %r3,-666
+ 110:	97 40 00 00 7e ad be ef 	mod %r4,0x7eadbeef
+ 118:	9f 56 00 00 00 00 00 00 	mod %r5,%ctx
+ 120:	a7 20 00 00 00 00 02 9a 	xor %r2,0x29a
+ 128:	a7 30 00 00 ff ff fd 66 	xor %r3,-666
+ 130:	a7 40 00 00 7e ad be ef 	xor %r4,0x7eadbeef
+ 138:	af 56 00 00 00 00 00 00 	xor %r5,%ctx
+ 140:	b7 20 00 00 00 00 02 9a 	mov %r2,0x29a
+ 148:	b7 30 00 00 ff ff fd 66 	mov %r3,-666
+ 150:	b7 40 00 00 7e ad be ef 	mov %r4,0x7eadbeef
+ 158:	bf 56 00 00 00 00 00 00 	mov %r5,%ctx
+ 160:	c7 20 00 00 00 00 02 9a 	arsh %r2,0x29a
+ 168:	c7 30 00 00 ff ff fd 66 	arsh %r3,-666
+ 170:	c7 40 00 00 7e ad be ef 	arsh %r4,0x7eadbeef
+ 178:	cf 56 00 00 00 00 00 00 	arsh %r5,%ctx
+ 180:	8f 20 00 00 00 00 00 00 	neg %r2
diff --git a/gas/testsuite/gas/bpf/alu.d b/gas/testsuite/gas/bpf/alu.d
new file mode 100644
index 0000000000..c1ad2e0136
--- /dev/null
+++ b/gas/testsuite/gas/bpf/alu.d
@@ -0,0 +1,58 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF ALU64 instructions
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	07 02 00 00 9a 02 00 00 	add %r2,0x29a
+   8:	07 03 00 00 66 fd ff ff 	add %r3,-666
+  10:	07 04 00 00 ef be ad 7e 	add %r4,0x7eadbeef
+  18:	0f 65 00 00 00 00 00 00 	add %r5,%ctx
+  20:	17 02 00 00 9a 02 00 00 	sub %r2,0x29a
+  28:	17 03 00 00 66 fd ff ff 	sub %r3,-666
+  30:	17 04 00 00 ef be ad 7e 	sub %r4,0x7eadbeef
+  38:	1f 65 00 00 00 00 00 00 	sub %r5,%ctx
+  40:	27 02 00 00 9a 02 00 00 	mul %r2,0x29a
+  48:	27 03 00 00 66 fd ff ff 	mul %r3,-666
+  50:	27 04 00 00 ef be ad 7e 	mul %r4,0x7eadbeef
+  58:	2f 65 00 00 00 00 00 00 	mul %r5,%ctx
+  60:	37 02 00 00 9a 02 00 00 	div %r2,0x29a
+  68:	37 03 00 00 66 fd ff ff 	div %r3,-666
+  70:	37 04 00 00 ef be ad 7e 	div %r4,0x7eadbeef
+  78:	3f 65 00 00 00 00 00 00 	div %r5,%ctx
+  80:	47 02 00 00 9a 02 00 00 	or %r2,0x29a
+  88:	47 03 00 00 66 fd ff ff 	or %r3,-666
+  90:	47 04 00 00 ef be ad 7e 	or %r4,0x7eadbeef
+  98:	4f 65 00 00 00 00 00 00 	or %r5,%ctx
+  a0:	57 02 00 00 9a 02 00 00 	and %r2,0x29a
+  a8:	57 03 00 00 66 fd ff ff 	and %r3,-666
+  b0:	57 04 00 00 ef be ad 7e 	and %r4,0x7eadbeef
+  b8:	5f 65 00 00 00 00 00 00 	and %r5,%ctx
+  c0:	67 02 00 00 9a 02 00 00 	lsh %r2,0x29a
+  c8:	67 03 00 00 66 fd ff ff 	lsh %r3,-666
+  d0:	67 04 00 00 ef be ad 7e 	lsh %r4,0x7eadbeef
+  d8:	6f 65 00 00 00 00 00 00 	lsh %r5,%ctx
+  e0:	77 02 00 00 9a 02 00 00 	rsh %r2,0x29a
+  e8:	77 03 00 00 66 fd ff ff 	rsh %r3,-666
+  f0:	77 04 00 00 ef be ad 7e 	rsh %r4,0x7eadbeef
+  f8:	7f 65 00 00 00 00 00 00 	rsh %r5,%ctx
+ 100:	97 02 00 00 9a 02 00 00 	mod %r2,0x29a
+ 108:	97 03 00 00 66 fd ff ff 	mod %r3,-666
+ 110:	97 04 00 00 ef be ad 7e 	mod %r4,0x7eadbeef
+ 118:	9f 65 00 00 00 00 00 00 	mod %r5,%ctx
+ 120:	a7 02 00 00 9a 02 00 00 	xor %r2,0x29a
+ 128:	a7 03 00 00 66 fd ff ff 	xor %r3,-666
+ 130:	a7 04 00 00 ef be ad 7e 	xor %r4,0x7eadbeef
+ 138:	af 65 00 00 00 00 00 00 	xor %r5,%ctx
+ 140:	b7 02 00 00 9a 02 00 00 	mov %r2,0x29a
+ 148:	b7 03 00 00 66 fd ff ff 	mov %r3,-666
+ 150:	b7 04 00 00 ef be ad 7e 	mov %r4,0x7eadbeef
+ 158:	bf 65 00 00 00 00 00 00 	mov %r5,%ctx
+ 160:	c7 02 00 00 9a 02 00 00 	arsh %r2,0x29a
+ 168:	c7 03 00 00 66 fd ff ff 	arsh %r3,-666
+ 170:	c7 04 00 00 ef be ad 7e 	arsh %r4,0x7eadbeef
+ 178:	cf 65 00 00 00 00 00 00 	arsh %r5,%ctx
+ 180:	8f 02 00 00 00 00 00 00 	neg %r2
diff --git a/gas/testsuite/gas/bpf/alu.s b/gas/testsuite/gas/bpf/alu.s
new file mode 100644
index 0000000000..18e60d5eae
--- /dev/null
+++ b/gas/testsuite/gas/bpf/alu.s
@@ -0,0 +1,51 @@
+# Tests for the ALU64 eBPF instructions
+        .text
+        add	%r2, 666
+        add	%r3, -666
+        add	%r4, 0x7eadbeef
+        add	%r5, %r6
+        sub	%r2, 666
+        sub	%r3, -666
+        sub	%r4, 0x7eadbeef
+        sub	%r5, %r6
+        mul	%r2, 666
+        mul	%r3, -666
+        mul	%r4, 0x7eadbeef
+        mul	%r5, %r6
+        div	%r2, 666
+        div	%r3, -666
+        div	%r4, 0x7eadbeef
+        div	%r5, %r6
+        or	%r2, 666
+        or	%r3, -666
+        or	%r4, 0x7eadbeef
+        or	%r5, %r6
+        and	%r2, 666
+        and	%r3, -666
+        and	%r4, 0x7eadbeef
+        and	%r5, %r6
+        lsh	%r2, 666
+        lsh	%r3, -666
+        lsh	%r4, 0x7eadbeef
+        lsh	%r5, %r6
+        rsh	%r2, 666
+        rsh	%r3, -666
+        rsh	%r4, 0x7eadbeef
+        rsh	%r5, %r6
+        mod	%r2, 666
+        mod	%r3, -666
+        mod	%r4, 0x7eadbeef
+        mod	%r5, %r6
+        xor	%r2, 666
+        xor	%r3, -666
+        xor	%r4, 0x7eadbeef
+        xor	%r5, %r6
+        mov	%r2, 666
+        mov	%r3, -666
+        mov	%r4, 0x7eadbeef
+        mov	%r5, %r6
+        arsh	%r2, 666
+        arsh	%r3, -666
+        arsh	%r4, 0x7eadbeef
+        arsh	%r5, %r6
+        neg     %r2
diff --git a/gas/testsuite/gas/bpf/alu32-be.d b/gas/testsuite/gas/bpf/alu32-be.d
new file mode 100644
index 0000000000..8cebbbfbc9
--- /dev/null
+++ b/gas/testsuite/gas/bpf/alu32-be.d
@@ -0,0 +1,65 @@
+#as: --EB
+#source: alu32.s
+#objdump: -dr
+#name: eBPF ALU instructions, big-endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	04 20 00 00 00 00 02 9a 	add32 %r2,0x29a
+   8:	04 30 00 00 ff ff fd 66 	add32 %r3,-666
+  10:	04 40 00 00 7e ad be ef 	add32 %r4,0x7eadbeef
+  18:	0c 56 00 00 00 00 00 00 	add32 %r5,%ctx
+  20:	14 20 00 00 00 00 02 9a 	sub32 %r2,0x29a
+  28:	14 30 00 00 ff ff fd 66 	sub32 %r3,-666
+  30:	14 40 00 00 7e ad be ef 	sub32 %r4,0x7eadbeef
+  38:	1c 56 00 00 00 00 00 00 	sub32 %r5,%ctx
+  40:	24 20 00 00 00 00 02 9a 	mul32 %r2,0x29a
+  48:	24 30 00 00 ff ff fd 66 	mul32 %r3,-666
+  50:	24 40 00 00 7e ad be ef 	mul32 %r4,0x7eadbeef
+  58:	2c 56 00 00 00 00 00 00 	mul32 %r5,%ctx
+  60:	34 20 00 00 00 00 02 9a 	div32 %r2,0x29a
+  68:	34 30 00 00 ff ff fd 66 	div32 %r3,-666
+  70:	34 40 00 00 7e ad be ef 	div32 %r4,0x7eadbeef
+  78:	3c 56 00 00 00 00 00 00 	div32 %r5,%ctx
+  80:	44 20 00 00 00 00 02 9a 	or32 %r2,0x29a
+  88:	44 30 00 00 ff ff fd 66 	or32 %r3,-666
+  90:	44 40 00 00 7e ad be ef 	or32 %r4,0x7eadbeef
+  98:	4c 56 00 00 00 00 00 00 	or32 %r5,%ctx
+  a0:	54 20 00 00 00 00 02 9a 	and32 %r2,0x29a
+  a8:	54 30 00 00 ff ff fd 66 	and32 %r3,-666
+  b0:	54 40 00 00 7e ad be ef 	and32 %r4,0x7eadbeef
+  b8:	5c 56 00 00 00 00 00 00 	and32 %r5,%ctx
+  c0:	64 20 00 00 00 00 02 9a 	lsh32 %r2,0x29a
+  c8:	64 30 00 00 ff ff fd 66 	lsh32 %r3,-666
+  d0:	64 40 00 00 7e ad be ef 	lsh32 %r4,0x7eadbeef
+  d8:	6c 56 00 00 00 00 00 00 	lsh32 %r5,%ctx
+  e0:	74 20 00 00 00 00 02 9a 	rsh32 %r2,0x29a
+  e8:	74 30 00 00 ff ff fd 66 	rsh32 %r3,-666
+  f0:	74 40 00 00 7e ad be ef 	rsh32 %r4,0x7eadbeef
+  f8:	7c 56 00 00 00 00 00 00 	rsh32 %r5,%ctx
+ 100:	94 20 00 00 00 00 02 9a 	mod32 %r2,0x29a
+ 108:	94 30 00 00 ff ff fd 66 	mod32 %r3,-666
+ 110:	94 40 00 00 7e ad be ef 	mod32 %r4,0x7eadbeef
+ 118:	9c 56 00 00 00 00 00 00 	mod32 %r5,%ctx
+ 120:	a4 20 00 00 00 00 02 9a 	xor32 %r2,0x29a
+ 128:	a4 30 00 00 ff ff fd 66 	xor32 %r3,-666
+ 130:	a4 40 00 00 7e ad be ef 	xor32 %r4,0x7eadbeef
+ 138:	ac 56 00 00 00 00 00 00 	xor32 %r5,%ctx
+ 140:	b4 20 00 00 00 00 02 9a 	mov32 %r2,0x29a
+ 148:	b4 30 00 00 ff ff fd 66 	mov32 %r3,-666
+ 150:	b4 40 00 00 7e ad be ef 	mov32 %r4,0x7eadbeef
+ 158:	bc 56 00 00 00 00 00 00 	mov32 %r5,%ctx
+ 160:	c4 20 00 00 00 00 02 9a 	arsh32 %r2,0x29a
+ 168:	c4 30 00 00 ff ff fd 66 	arsh32 %r3,-666
+ 170:	c4 40 00 00 7e ad be ef 	arsh32 %r4,0x7eadbeef
+ 178:	cc 56 00 00 00 00 00 00 	arsh32 %r5,%ctx
+ 180:	8c 20 00 00 00 00 00 00 	neg32 %r2
+ 188:	d4 90 00 00 00 00 00 10 	endle %r9,16
+ 190:	d4 80 00 00 00 00 00 20 	endle %r8,32
+ 198:	d4 70 00 00 00 00 00 40 	endle %r7,64
+ 1a0:	dc 60 00 00 00 00 00 10 	endbe %ctx,16
+ 1a8:	dc 50 00 00 00 00 00 20 	endbe %r5,32
+ 1b0:	dc 40 00 00 00 00 00 40 	endbe %r4,64
diff --git a/gas/testsuite/gas/bpf/alu32.d b/gas/testsuite/gas/bpf/alu32.d
new file mode 100644
index 0000000000..655a71b14b
--- /dev/null
+++ b/gas/testsuite/gas/bpf/alu32.d
@@ -0,0 +1,64 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF ALU instructions
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	04 02 00 00 9a 02 00 00 	add32 %r2,0x29a
+   8:	04 03 00 00 66 fd ff ff 	add32 %r3,-666
+  10:	04 04 00 00 ef be ad 7e 	add32 %r4,0x7eadbeef
+  18:	0c 65 00 00 00 00 00 00 	add32 %r5,%ctx
+  20:	14 02 00 00 9a 02 00 00 	sub32 %r2,0x29a
+  28:	14 03 00 00 66 fd ff ff 	sub32 %r3,-666
+  30:	14 04 00 00 ef be ad 7e 	sub32 %r4,0x7eadbeef
+  38:	1c 65 00 00 00 00 00 00 	sub32 %r5,%ctx
+  40:	24 02 00 00 9a 02 00 00 	mul32 %r2,0x29a
+  48:	24 03 00 00 66 fd ff ff 	mul32 %r3,-666
+  50:	24 04 00 00 ef be ad 7e 	mul32 %r4,0x7eadbeef
+  58:	2c 65 00 00 00 00 00 00 	mul32 %r5,%ctx
+  60:	34 02 00 00 9a 02 00 00 	div32 %r2,0x29a
+  68:	34 03 00 00 66 fd ff ff 	div32 %r3,-666
+  70:	34 04 00 00 ef be ad 7e 	div32 %r4,0x7eadbeef
+  78:	3c 65 00 00 00 00 00 00 	div32 %r5,%ctx
+  80:	44 02 00 00 9a 02 00 00 	or32 %r2,0x29a
+  88:	44 03 00 00 66 fd ff ff 	or32 %r3,-666
+  90:	44 04 00 00 ef be ad 7e 	or32 %r4,0x7eadbeef
+  98:	4c 65 00 00 00 00 00 00 	or32 %r5,%ctx
+  a0:	54 02 00 00 9a 02 00 00 	and32 %r2,0x29a
+  a8:	54 03 00 00 66 fd ff ff 	and32 %r3,-666
+  b0:	54 04 00 00 ef be ad 7e 	and32 %r4,0x7eadbeef
+  b8:	5c 65 00 00 00 00 00 00 	and32 %r5,%ctx
+  c0:	64 02 00 00 9a 02 00 00 	lsh32 %r2,0x29a
+  c8:	64 03 00 00 66 fd ff ff 	lsh32 %r3,-666
+  d0:	64 04 00 00 ef be ad 7e 	lsh32 %r4,0x7eadbeef
+  d8:	6c 65 00 00 00 00 00 00 	lsh32 %r5,%ctx
+  e0:	74 02 00 00 9a 02 00 00 	rsh32 %r2,0x29a
+  e8:	74 03 00 00 66 fd ff ff 	rsh32 %r3,-666
+  f0:	74 04 00 00 ef be ad 7e 	rsh32 %r4,0x7eadbeef
+  f8:	7c 65 00 00 00 00 00 00 	rsh32 %r5,%ctx
+ 100:	94 02 00 00 9a 02 00 00 	mod32 %r2,0x29a
+ 108:	94 03 00 00 66 fd ff ff 	mod32 %r3,-666
+ 110:	94 04 00 00 ef be ad 7e 	mod32 %r4,0x7eadbeef
+ 118:	9c 65 00 00 00 00 00 00 	mod32 %r5,%ctx
+ 120:	a4 02 00 00 9a 02 00 00 	xor32 %r2,0x29a
+ 128:	a4 03 00 00 66 fd ff ff 	xor32 %r3,-666
+ 130:	a4 04 00 00 ef be ad 7e 	xor32 %r4,0x7eadbeef
+ 138:	ac 65 00 00 00 00 00 00 	xor32 %r5,%ctx
+ 140:	b4 02 00 00 9a 02 00 00 	mov32 %r2,0x29a
+ 148:	b4 03 00 00 66 fd ff ff 	mov32 %r3,-666
+ 150:	b4 04 00 00 ef be ad 7e 	mov32 %r4,0x7eadbeef
+ 158:	bc 65 00 00 00 00 00 00 	mov32 %r5,%ctx
+ 160:	c4 02 00 00 9a 02 00 00 	arsh32 %r2,0x29a
+ 168:	c4 03 00 00 66 fd ff ff 	arsh32 %r3,-666
+ 170:	c4 04 00 00 ef be ad 7e 	arsh32 %r4,0x7eadbeef
+ 178:	cc 65 00 00 00 00 00 00 	arsh32 %r5,%ctx
+ 180:	8c 02 00 00 00 00 00 00 	neg32 %r2
+ 188:	d4 09 00 00 10 00 00 00 	endle %r9,16
+ 190:	d4 08 00 00 20 00 00 00 	endle %r8,32
+ 198:	d4 07 00 00 40 00 00 00 	endle %r7,64
+ 1a0:	dc 06 00 00 10 00 00 00 	endbe %ctx,16
+ 1a8:	dc 05 00 00 20 00 00 00 	endbe %r5,32
+ 1b0:	dc 04 00 00 40 00 00 00 	endbe %r4,64
diff --git a/gas/testsuite/gas/bpf/alu32.s b/gas/testsuite/gas/bpf/alu32.s
new file mode 100644
index 0000000000..7b6f014e8b
--- /dev/null
+++ b/gas/testsuite/gas/bpf/alu32.s
@@ -0,0 +1,57 @@
+# Tests for the ALU eBPF instructions
+        .text
+        add32	%r2, 666
+        add32	%r3, -666
+        add32	%r4, 0x7eadbeef
+        add32	%r5, %r6
+        sub32	%r2, 666
+        sub32	%r3, -666
+        sub32	%r4, 0x7eadbeef
+        sub32	%r5, %r6
+        mul32	%r2, 666
+        mul32	%r3, -666
+        mul32	%r4, 0x7eadbeef
+        mul32	%r5, %r6
+        div32	%r2, 666
+        div32	%r3, -666
+        div32	%r4, 0x7eadbeef
+        div32	%r5, %r6
+        or32	%r2, 666
+        or32	%r3, -666
+        or32	%r4, 0x7eadbeef
+        or32	%r5, %r6
+        and32	%r2, 666
+        and32	%r3, -666
+        and32	%r4, 0x7eadbeef
+        and32	%r5, %r6
+        lsh32	%r2, 666
+        lsh32	%r3, -666
+        lsh32	%r4, 0x7eadbeef
+        lsh32	%r5, %r6
+        rsh32	%r2, 666
+        rsh32	%r3, -666
+        rsh32	%r4, 0x7eadbeef
+        rsh32	%r5, %r6
+        mod32	%r2, 666
+        mod32	%r3, -666
+        mod32	%r4, 0x7eadbeef
+        mod32	%r5, %r6
+        xor32	%r2, 666
+        xor32	%r3, -666
+        xor32	%r4, 0x7eadbeef
+        xor32	%r5, %r6
+        mov32	%r2, 666
+        mov32	%r3, -666
+        mov32	%r4, 0x7eadbeef
+        mov32	%r5, %r6
+        arsh32	%r2, 666
+        arsh32	%r3, -666
+        arsh32	%r4, 0x7eadbeef
+        arsh32	%r5, %r6
+        neg32	%r2
+	endle	%r9,16
+        endle	%r8,32
+        endle	%r7,64
+        endbe	%r6,16
+        endbe	%r5,32
+        endbe	%r4,64
diff --git a/gas/testsuite/gas/bpf/atomic-be.d b/gas/testsuite/gas/bpf/atomic-be.d
new file mode 100644
index 0000000000..04161e08ac
--- /dev/null
+++ b/gas/testsuite/gas/bpf/atomic-be.d
@@ -0,0 +1,12 @@
+#as: --EB
+#source: atomic.s
+#objdump: -dr
+#name: eBPF atomic instructions, big endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	db 12 1e ef 00 00 00 00 	xadddw \[%r1\+0x1eef\],%r2
+   8:	c3 12 1e ef 00 00 00 00 	xaddw \[%r1\+0x1eef\],%r2
diff --git a/gas/testsuite/gas/bpf/atomic.d b/gas/testsuite/gas/bpf/atomic.d
new file mode 100644
index 0000000000..1c83cb582a
--- /dev/null
+++ b/gas/testsuite/gas/bpf/atomic.d
@@ -0,0 +1,11 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF atomic instructions
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	db 21 ef 1e 00 00 00 00 	xadddw \[%r1\+0x1eef\],%r2
+   8:	c3 21 ef 1e 00 00 00 00 	xaddw \[%r1\+0x1eef\],%r2
diff --git a/gas/testsuite/gas/bpf/atomic.s b/gas/testsuite/gas/bpf/atomic.s
new file mode 100644
index 0000000000..0119b24c8b
--- /dev/null
+++ b/gas/testsuite/gas/bpf/atomic.s
@@ -0,0 +1,5 @@
+        # Test for eBPF ADDW and ADDDW instructions
+        .text
+        xadddw	[%r1+0x1eef], %r2
+        xaddw	[%r1+0x1eef], %r2
+        
diff --git a/gas/testsuite/gas/bpf/bpf.exp b/gas/testsuite/gas/bpf/bpf.exp
new file mode 100644
index 0000000000..e228fd4d1b
--- /dev/null
+++ b/gas/testsuite/gas/bpf/bpf.exp
@@ -0,0 +1,38 @@
+# GAS testsuite for the Linux eBPF -*- Tcl -*-
+#
+# Copyright (C) 2019 Free Software Foundation, Inc.
+# Contributed by Oracle, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  
+
+if {[istarget bpf*-*-*]} {
+    run_dump_test lddw
+    run_dump_test alu
+    run_dump_test alu32
+    run_dump_test mem
+    run_dump_test jump
+    run_dump_test call
+    run_dump_test exit
+    run_dump_test atomic
+
+    run_dump_test lddw-be
+    run_dump_test alu-be
+    run_dump_test alu32-be
+    run_dump_test mem-be
+    run_dump_test jump-be
+    run_dump_test call-be
+    run_dump_test exit-be
+    run_dump_test atomic-be
+}
diff --git a/gas/testsuite/gas/bpf/call-be.d b/gas/testsuite/gas/bpf/call-be.d
new file mode 100644
index 0000000000..bd3b50f36b
--- /dev/null
+++ b/gas/testsuite/gas/bpf/call-be.d
@@ -0,0 +1,19 @@
+#as: --EB
+#source: call.s
+#objdump: -dr
+#name: eBPF CALL instruction, big endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+[0-9a-f]+ <.*>:
+   0:	85 00 00 00 00 00 00 00 	call 0
+   8:	85 00 00 00 00 00 00 01 	call 1
+  10:	85 00 00 00 ff ff ff fe 	call -2
+  18:	85 00 00 00 00 00 00 0a 	call 10
+  20:	85 01 00 00 00 00 00 00 	call 0
+[0-9a-f]+ <foo>:
+  28:	85 01 00 00 ff ff ff ff 	call -1
+  30:	85 01 00 00 ff ff ff fe 	call -2
+  38:	85 01 00 00 ff ff ff fd 	call -3
\ No newline at end of file
diff --git a/gas/testsuite/gas/bpf/call.d b/gas/testsuite/gas/bpf/call.d
new file mode 100644
index 0000000000..daefbd0802
--- /dev/null
+++ b/gas/testsuite/gas/bpf/call.d
@@ -0,0 +1,18 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF CALL instruction
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+[0-9a-f]+ <.*>:
+   0:	85 00 00 00 00 00 00 00 	call 0
+   8:	85 00 00 00 01 00 00 00 	call 1
+  10:	85 00 00 00 fe ff ff ff 	call -2
+  18:	85 00 00 00 0a 00 00 00 	call 10
+  20:	85 10 00 00 00 00 00 00 	call 0
+[0-9a-f]+ <foo>:
+  28:	85 10 00 00 ff ff ff ff 	call -1
+  30:	85 10 00 00 fe ff ff ff 	call -2
+  38:	85 10 00 00 fd ff ff ff 	call -3
diff --git a/gas/testsuite/gas/bpf/call.s b/gas/testsuite/gas/bpf/call.s
new file mode 100644
index 0000000000..45c8ca5f80
--- /dev/null
+++ b/gas/testsuite/gas/bpf/call.s
@@ -0,0 +1,11 @@
+        # eBPF tests for the CALL instruction
+
+        .text
+        call 0
+        call 1
+        call -2
+        call 0xa
+        call foo
+foo:    call foo
+        call foo
+        call foo
diff --git a/gas/testsuite/gas/bpf/exit-be.d b/gas/testsuite/gas/bpf/exit-be.d
new file mode 100644
index 0000000000..d3b88c7373
--- /dev/null
+++ b/gas/testsuite/gas/bpf/exit-be.d
@@ -0,0 +1,11 @@
+#as: --EB
+#source: exit.s
+#objdump: -dr
+#name: eBPF EXIT instruction, big endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	95 00 00 00 00 00 00 00 	exit
\ No newline at end of file
diff --git a/gas/testsuite/gas/bpf/exit.d b/gas/testsuite/gas/bpf/exit.d
new file mode 100644
index 0000000000..87bc91b2d2
--- /dev/null
+++ b/gas/testsuite/gas/bpf/exit.d
@@ -0,0 +1,10 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF EXIT instruction
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	95 00 00 00 00 00 00 00 	exit
\ No newline at end of file
diff --git a/gas/testsuite/gas/bpf/exit.s b/gas/testsuite/gas/bpf/exit.s
new file mode 100644
index 0000000000..5a4c4f1963
--- /dev/null
+++ b/gas/testsuite/gas/bpf/exit.s
@@ -0,0 +1,2 @@
+        .text
+        exit
diff --git a/gas/testsuite/gas/bpf/jump-be.d b/gas/testsuite/gas/bpf/jump-be.d
new file mode 100644
index 0000000000..65632e0813
--- /dev/null
+++ b/gas/testsuite/gas/bpf/jump-be.d
@@ -0,0 +1,32 @@
+#as: --EB
+#source: jump.s
+#objdump: -dr
+#name: eBPF JUMP instructions, big endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	05 00 00 03 00 00 00 00 	ja 3
+   8:	0f 11 00 00 00 00 00 00 	add %r1,%r1
+  10:	15 30 00 01 00 00 00 03 	jeq %r3,3,1
+  18:	1d 34 00 00 00 00 00 00 	jeq %r3,%r4,0
+  20:	35 30 ff fd 00 00 00 03 	jge %r3,3,-3
+  28:	3d 34 ff fc 00 00 00 00 	jge %r3,%r4,-4
+  30:	a5 30 00 01 00 00 00 03 	jlt %r3,3,1
+  38:	ad 34 00 00 00 00 00 00 	jlt %r3,%r4,0
+  40:	b5 30 00 01 00 00 00 03 	jle %r3,3,1
+  48:	bd 34 00 00 00 00 00 00 	jle %r3,%r4,0
+  50:	45 30 00 01 00 00 00 03 	jset %r3,3,1
+  58:	4d 34 00 00 00 00 00 00 	jset %r3,%r4,0
+  60:	55 30 00 01 00 00 00 03 	jne %r3,3,1
+  68:	5d 34 00 00 00 00 00 00 	jne %r3,%r4,0
+  70:	65 30 00 01 00 00 00 03 	jsgt %r3,3,1
+  78:	6d 34 00 00 00 00 00 00 	jsgt %r3,%r4,0
+  80:	75 30 00 01 00 00 00 03 	jsge %r3,3,1
+  88:	7d 34 00 00 00 00 00 00 	jsge %r3,%r4,0
+  90:	c5 30 00 01 00 00 00 03 	jslt %r3,3,1
+  98:	cd 34 00 00 00 00 00 00 	jslt %r3,%r4,0
+  a0:	d5 30 00 01 00 00 00 03 	jsle %r3,3,1
+  a8:	dd 34 00 00 00 00 00 00 	jsle %r3,%r4,0
diff --git a/gas/testsuite/gas/bpf/jump.d b/gas/testsuite/gas/bpf/jump.d
new file mode 100644
index 0000000000..ca600f602b
--- /dev/null
+++ b/gas/testsuite/gas/bpf/jump.d
@@ -0,0 +1,31 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF JUMP instructions
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	05 00 03 00 00 00 00 00 	ja 3
+   8:	0f 11 00 00 00 00 00 00 	add %r1,%r1
+  10:	15 03 01 00 03 00 00 00 	jeq %r3,3,1
+  18:	1d 43 00 00 00 00 00 00 	jeq %r3,%r4,0
+  20:	35 03 fd ff 03 00 00 00 	jge %r3,3,-3
+  28:	3d 43 fc ff 00 00 00 00 	jge %r3,%r4,-4
+  30:	a5 03 01 00 03 00 00 00 	jlt %r3,3,1
+  38:	ad 43 00 00 00 00 00 00 	jlt %r3,%r4,0
+  40:	b5 03 01 00 03 00 00 00 	jle %r3,3,1
+  48:	bd 43 00 00 00 00 00 00 	jle %r3,%r4,0
+  50:	45 03 01 00 03 00 00 00 	jset %r3,3,1
+  58:	4d 43 00 00 00 00 00 00 	jset %r3,%r4,0
+  60:	55 03 01 00 03 00 00 00 	jne %r3,3,1
+  68:	5d 43 00 00 00 00 00 00 	jne %r3,%r4,0
+  70:	65 03 01 00 03 00 00 00 	jsgt %r3,3,1
+  78:	6d 43 00 00 00 00 00 00 	jsgt %r3,%r4,0
+  80:	75 03 01 00 03 00 00 00 	jsge %r3,3,1
+  88:	7d 43 00 00 00 00 00 00 	jsge %r3,%r4,0
+  90:	c5 03 01 00 03 00 00 00 	jslt %r3,3,1
+  98:	cd 43 00 00 00 00 00 00 	jslt %r3,%r4,0
+  a0:	d5 03 01 00 03 00 00 00 	jsle %r3,3,1
+  a8:	dd 43 00 00 00 00 00 00 	jsle %r3,%r4,0
\ No newline at end of file
diff --git a/gas/testsuite/gas/bpf/jump.s b/gas/testsuite/gas/bpf/jump.s
new file mode 100644
index 0000000000..aae4295e16
--- /dev/null
+++ b/gas/testsuite/gas/bpf/jump.s
@@ -0,0 +1,25 @@
+# Tests for the JUMP instructions
+        .text
+        ja 2f
+        add %r1,%r1
+1:      jeq %r3,3,2f
+        jeq %r3,%r4,2f
+2:      jge %r3,3,1b
+        jge %r3,%r4,1b
+1:      jlt %r3,3,1f
+        jlt %r3,%r4,1f
+1:      jle %r3,3,1f
+        jle %r3,%r4,1f
+1:      jset %r3,3,1f
+        jset %r3,%r4,1f
+1:      jne %r3,3,1f
+        jne %r3,%r4,1f
+1:      jsgt %r3,3,1f
+        jsgt %r3,%r4,1f
+1:      jsge %r3,3,1f
+        jsge %r3,%r4,1f
+1:      jslt %r3,3,1f
+        jslt %r3,%r4,1f
+1:      jsle %r3,3,1f
+        jsle %r3,%r4,1f
+1:      
diff --git a/gas/testsuite/gas/bpf/lddw-be.d b/gas/testsuite/gas/bpf/lddw-be.d
new file mode 100644
index 0000000000..1d722fa569
--- /dev/null
+++ b/gas/testsuite/gas/bpf/lddw-be.d
@@ -0,0 +1,18 @@
+#as: --EB
+#source: lddw.s
+#objdump: -dr
+#name: eBPF LDDW, big-endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	18 30 00 00 00 00 00 01 	lddw %r3,1
+   8:	00 00 00 00 00 00 00 00 
+  10:	18 40 00 00 de ad be ef 	lddw %r4,0xdeadbeef
+  18:	00 00 00 00 00 00 00 00 
+  20:	18 50 00 00 55 66 77 88 	lddw %r5,0x1122334455667788
+  28:	00 00 00 00 11 22 33 44 
+  30:	18 60 00 00 ff ff ff fe 	lddw %ctx,-2
+  38:	00 00 00 00 ff ff ff ff 
diff --git a/gas/testsuite/gas/bpf/lddw.d b/gas/testsuite/gas/bpf/lddw.d
new file mode 100644
index 0000000000..2ab4f73ac5
--- /dev/null
+++ b/gas/testsuite/gas/bpf/lddw.d
@@ -0,0 +1,17 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF LDDW
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	18 03 00 00 01 00 00 00 	lddw %r3,1
+   8:	00 00 00 00 00 00 00 00 
+  10:	18 04 00 00 ef be ad de 	lddw %r4,0xdeadbeef
+  18:	00 00 00 00 00 00 00 00 
+  20:	18 05 00 00 88 77 66 55 	lddw %r5,0x1122334455667788
+  28:	00 00 00 00 44 33 22 11 
+  30:	18 06 00 00 fe ff ff ff 	lddw %ctx,-2
+  38:	00 00 00 00 ff ff ff ff 
diff --git a/gas/testsuite/gas/bpf/lddw.s b/gas/testsuite/gas/bpf/lddw.s
new file mode 100644
index 0000000000..9e65e4a607
--- /dev/null
+++ b/gas/testsuite/gas/bpf/lddw.s
@@ -0,0 +1,6 @@
+# Tests for the LDDW instruction
+        .text
+        lddw	%r3, 1
+        lddw	%r4, 0xdeadbeef
+        lddw	%r5, 0x1122334455667788
+        lddw	%r6, -2
diff --git a/gas/testsuite/gas/bpf/mem-be.d b/gas/testsuite/gas/bpf/mem-be.d
new file mode 100644
index 0000000000..70d8806bc5
--- /dev/null
+++ b/gas/testsuite/gas/bpf/mem-be.d
@@ -0,0 +1,30 @@
+#as: --EB
+#source: mem.s
+#objdump: -dr
+#name: eBPF MEM instructions, modulus lddw, big endian
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	20 23 00 00 00 00 be ef 	ldabsw %r2,%r3,0xbeef
+   8:	28 45 00 00 00 00 be ef 	ldabsh %r4,%r5,0xbeef
+  10:	30 67 00 00 00 00 be ef 	ldabsb %ctx,%r7,0xbeef
+  18:	38 89 00 00 00 00 be ef 	ldabsdw %r8,%r9,0xbeef
+  20:	40 23 00 00 00 00 be ef 	ldindw %r2,%r3,0xbeef
+  28:	48 45 00 00 00 00 be ef 	ldindh %r4,%r5,0xbeef
+  30:	50 67 00 00 00 00 be ef 	ldindb %ctx,%r7,0xbeef
+  38:	58 89 00 00 00 00 be ef 	ldinddw %r8,%r9,0xbeef
+  40:	61 21 7e ef 00 00 00 00 	ldxw %r2,\[%r1\+0x7eef\]
+  48:	69 21 7e ef 00 00 00 00 	ldxh %r2,\[%r1\+0x7eef\]
+  50:	71 21 7e ef 00 00 00 00 	ldxb %r2,\[%r1\+0x7eef\]
+  58:	79 21 ff fe 00 00 00 00 	ldxdw %r2,\[%r1\+-2\]
+  60:	63 12 7e ef 00 00 00 00 	stxw \[%r1\+0x7eef\],%r2
+  68:	6b 12 7e ef 00 00 00 00 	stxh \[%r1\+0x7eef\],%r2
+  70:	73 12 7e ef 00 00 00 00 	stxb \[%r1\+0x7eef\],%r2
+  78:	7b 12 ff fe 00 00 00 00 	stxdw \[%r1\+-2\],%r2
+  80:	72 10 7e ef 11 22 33 44 	stb \[%r1\+0x7eef\],0x11223344
+  88:	6a 10 7e ef 11 22 33 44 	sth \[%r1\+0x7eef\],0x11223344
+  90:	62 10 7e ef 11 22 33 44 	stw \[%r1\+0x7eef\],0x11223344
+  98:	7a 10 ff fe 11 22 33 44 	stdw \[%r1\+-2\],0x11223344
\ No newline at end of file
diff --git a/gas/testsuite/gas/bpf/mem.d b/gas/testsuite/gas/bpf/mem.d
new file mode 100644
index 0000000000..53492767fd
--- /dev/null
+++ b/gas/testsuite/gas/bpf/mem.d
@@ -0,0 +1,29 @@
+#as: --EL
+#objdump: -dr
+#name: eBPF MEM instructions, modulus lddw
+
+.*: +file format .*bpf.*
+
+Disassembly of section .text:
+
+0+ <.text>:
+   0:	20 32 00 00 ef be 00 00 	ldabsw %r2,%r3,0xbeef
+   8:	28 54 00 00 ef be 00 00 	ldabsh %r4,%r5,0xbeef
+  10:	30 76 00 00 ef be 00 00 	ldabsb %ctx,%r7,0xbeef
+  18:	38 98 00 00 ef be 00 00 	ldabsdw %r8,%r9,0xbeef
+  20:	40 32 00 00 ef be 00 00 	ldindw %r2,%r3,0xbeef
+  28:	48 54 00 00 ef be 00 00 	ldindh %r4,%r5,0xbeef
+  30:	50 76 00 00 ef be 00 00 	ldindb %ctx,%r7,0xbeef
+  38:	58 98 00 00 ef be 00 00 	ldinddw %r8,%r9,0xbeef
+  40:	61 12 ef 7e 00 00 00 00 	ldxw %r2,\[%r1\+0x7eef\]
+  48:	69 12 ef 7e 00 00 00 00 	ldxh %r2,\[%r1\+0x7eef\]
+  50:	71 12 ef 7e 00 00 00 00 	ldxb %r2,\[%r1\+0x7eef\]
+  58:	79 12 fe ff 00 00 00 00 	ldxdw %r2,\[%r1\+-2\]
+  60:	63 21 ef 7e 00 00 00 00 	stxw \[%r1\+0x7eef\],%r2
+  68:	6b 21 ef 7e 00 00 00 00 	stxh \[%r1\+0x7eef\],%r2
+  70:	73 21 ef 7e 00 00 00 00 	stxb \[%r1\+0x7eef\],%r2
+  78:	7b 21 fe ff 00 00 00 00 	stxdw \[%r1\+-2\],%r2
+  80:	72 01 ef 7e 44 33 22 11 	stb \[%r1\+0x7eef\],0x11223344
+  88:	6a 01 ef 7e 44 33 22 11 	sth \[%r1\+0x7eef\],0x11223344
+  90:	62 01 ef 7e 44 33 22 11 	stw \[%r1\+0x7eef\],0x11223344
+  98:	7a 01 fe ff 44 33 22 11 	stdw \[%r1\+-2\],0x11223344
diff --git a/gas/testsuite/gas/bpf/mem.s b/gas/testsuite/gas/bpf/mem.s
new file mode 100644
index 0000000000..cc5329c4ca
--- /dev/null
+++ b/gas/testsuite/gas/bpf/mem.s
@@ -0,0 +1,24 @@
+# eBPF tests for MEM instructions, modulus lddw.
+
+        .text
+
+ 	ldabsw %r2, %r3, 0xbeef
+	ldabsh %r4, %r5, 0xbeef
+ 	ldabsb %r6, %r7, 0xbeef
+ 	ldabsdw %r8, %r9, 0xbeef
+	ldindw %r2, %r3, 0xbeef
+ 	ldindh %r4, %r5, 0xbeef
+ 	ldindb %r6, %r7, 0xbeef
+ 	ldinddw %r8, %r9, 0xbeef
+ 	ldxw %r2, [%r1+0x7eef]
+ 	ldxh %r2, [%r1+0x7eef]
+ 	ldxb %r2, [%r1+0x7eef]
+ 	ldxdw %r2, [%r1+-2]
+ 	stxw [%r1+0x7eef], %r2
+ 	stxh [%r1+0x7eef], %r2
+ 	stxb [%r1+0x7eef], %r2
+ 	stxdw [%r1+-2], %r2
+ 	stb [%r1+0x7eef], 0x11223344
+ 	sth [%r1+0x7eef], 0x11223344
+ 	stw [%r1+0x7eef], 0x11223344
+ 	stdw [%r1+-2], 0x11223344
-- 
2.11.0


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]