This is the mail archive of the binutils@sourceware.org mailing list for the binutils project.
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
| Other format: | [Raw text] | |
ive committed this simple patch to appease my editor by doing: sed -i 's:[[:space:]]*$::' tc-bfin.[ch] bfin-* (and ignoring the ^L changes) -mike 2010-03-10 Mike Frysinger <michael.frysinger@analog.com> * bfin-defs.h, bfin-lex.l, bfin-parse.y, tc-bfin.c, tc-bfin.h: Strip trailing whitespace.
--- config/bfin-defs.h
+++ config/bfin-defs.h
@@ -20,10 +20,10 @@
02110-1301, USA. */
#ifndef BFIN_PARSE_H
-#define BFIN_PARSE_H
+#define BFIN_PARSE_H
#define PCREL 1
-#define CODE_FRAG_SIZE 4096 /* 1 page. */
+#define CODE_FRAG_SIZE 4096 /* 1 page. */
/* Definition for all status bits. */
@@ -36,7 +36,7 @@ typedef enum
c_uimm2,
c_uimm3,
c_imm3,
- c_pcrel4,
+ c_pcrel4,
c_imm4,
c_uimm4s4,
c_uimm4,
@@ -44,7 +44,7 @@ typedef enum
c_negimm5s4,
c_imm5,
c_uimm5,
- c_imm6,
+ c_imm6,
c_imm7,
c_imm8,
c_uimm8,
@@ -52,7 +52,7 @@ typedef enum
c_uimm8s4,
c_pcrel8s4,
c_lppcrel10,
- c_pcrel10,
+ c_pcrel10,
c_pcrel12,
c_imm16s4,
c_luimm16,
@@ -60,9 +60,9 @@ typedef enum
c_huimm16,
c_rimm16,
c_imm16s2,
- c_uimm16s4,
+ c_uimm16s4,
c_uimm16,
- c_pcrel24
+ c_pcrel24
} const_forms_t;
@@ -88,19 +88,19 @@ typedef enum
enum machine_registers
{
- REG_R0 = T_REG_R, REG_R1, REG_R2, REG_R3, REG_R4, REG_R5, REG_R6, REG_R7,
+ REG_R0 = T_REG_R, REG_R1, REG_R2, REG_R3, REG_R4, REG_R5, REG_R6, REG_R7,
REG_P0 = T_REG_P, REG_P1, REG_P2, REG_P3, REG_P4, REG_P5, REG_SP, REG_FP,
REG_I0 = T_REG_I, REG_I1, REG_I2, REG_I3,
- REG_M0 = T_REG_M, REG_M1, REG_M2, REG_M3,
+ REG_M0 = T_REG_M, REG_M1, REG_M2, REG_M3,
REG_B0 = T_REG_B, REG_B1, REG_B2, REG_B3,
- REG_L0 = T_REG_L, REG_L1, REG_L2, REG_L3,
+ REG_L0 = T_REG_L, REG_L1, REG_L2, REG_L3,
REG_A0x = T_REG_A, REG_A0w, REG_A1x, REG_A1w,
REG_ASTAT = 0x46,
REG_RETS = 0x47,
REG_LC0 = 0x60, REG_LT0, REG_LB0, REG_LC1, REG_LT1, REG_LB1,
REG_CYCLES, REG_CYCLES2,
REG_USP = 0x70, REG_SEQSTAT, REG_SYSCFG,
- REG_RETI, REG_RETX, REG_RETN, REG_RETE, REG_EMUDAT,
+ REG_RETI, REG_RETX, REG_RETN, REG_RETE, REG_EMUDAT,
/* These don't have groups. */
REG_sftreset = T_NOGROUP, REG_omode, REG_excause, REG_emucause,
@@ -108,9 +108,9 @@ enum machine_registers
REG_A0 = 0xc0, REG_A1, REG_CC,
/* Pseudo registers, used only for distinction from symbols. */
REG_RL0, REG_RL1, REG_RL2, REG_RL3,
- REG_RL4, REG_RL5, REG_RL6, REG_RL7,
+ REG_RL4, REG_RL5, REG_RL6, REG_RL7,
REG_RH0, REG_RH1, REG_RH2, REG_RH3,
- REG_RH4, REG_RH5, REG_RH6, REG_RH7,
+ REG_RH4, REG_RH5, REG_RH6, REG_RH7,
REG_LASTREG
};
@@ -129,7 +129,7 @@ enum statusflags
S_AV1S,
S_V = 24,
S_VS = 25
-};
+};
enum reg_class
@@ -224,7 +224,7 @@ enum reg_class
/* Expression value macros. */
typedef enum
-{
+{
ones_compl,
twos_compl,
mult,
@@ -242,7 +242,7 @@ typedef enum
struct expressionS;
#define SYMBOL_T symbolS*
-
+
struct expression_cell
{
int value;
@@ -258,14 +258,14 @@ struct bfin_insn
int pcrel;
int reloc;
};
-
+
#define INSTR_T struct bfin_insn*
-#define EXPR_T struct expression_cell*
+#define EXPR_T struct expression_cell*
typedef struct expr_node_struct Expr_Node;
-
+
extern INSTR_T gencode (unsigned long x);
-extern INSTR_T conscode (INSTR_T head, INSTR_T tail);
+extern INSTR_T conscode (INSTR_T head, INSTR_T tail);
extern INSTR_T conctcode (INSTR_T head, INSTR_T tail);
extern INSTR_T note_reloc
(INSTR_T code, Expr_Node *, int reloc,int pcrel);
@@ -273,9 +273,9 @@ extern INSTR_T note_reloc1
(INSTR_T code, const char * sym, int reloc, int pcrel);
extern INSTR_T note_reloc2
(INSTR_T code, const char *symbol, int reloc, int value, int pcrel);
-
+
/* Types of expressions. */
-typedef enum
+typedef enum
{
Expr_Node_Binop, /* Binary operator. */
Expr_Node_Unop, /* Unary operator. */
@@ -285,7 +285,7 @@ typedef enum
} Expr_Node_Type;
/* Types of operators. */
-typedef enum
+typedef enum
{
Expr_Op_Type_Add,
Expr_Op_Type_Sub,
@@ -322,17 +322,17 @@ struct expr_node_struct
/* Operations on the expression node. */
-Expr_Node *Expr_Node_Create (Expr_Node_Type type,
- Expr_Node_Value value,
- Expr_Node *Left_Child,
+Expr_Node *Expr_Node_Create (Expr_Node_Type type,
+ Expr_Node_Value value,
+ Expr_Node *Left_Child,
Expr_Node *Right_Child);
/* Generate the reloc structure as a series of instructions. */
INSTR_T Expr_Node_Gen_Reloc (Expr_Node *head, int parent_reloc);
-
+
#define MKREF(x) mkexpr (0,x)
#define ALLOCATE(x) malloc (x)
-
+
#define NULL_CODE ((INSTR_T) 0)
#ifndef EXPR_VALUE
--- config/bfin-lex.l
+++ config/bfin-lex.l
@@ -296,10 +296,10 @@ abort
yylval.value = parse_int (&yytext);
return NUMBER;
}
-[A-Za-z_$.][A-Za-z0-9_$.]* {
+[A-Za-z_$.][A-Za-z0-9_$.]* {
yylval.symbol = symbol_find_or_make (yytext);
symbol_mark_used (yylval.symbol);
- return SYMBOL;
+ return SYMBOL;
}
[0-9][bfBF] {
char *name;
@@ -312,8 +312,8 @@ abort
if ((yylval.symbol != NULL)
&& (S_IS_DEFINED (yylval.symbol)))
return SYMBOL;
- as_bad ("backward reference to unknown label %d:",
- (int) (ref[0] - '0'));
+ as_bad ("backward reference to unknown label %d:",
+ (int) (ref[0] - '0'));
}
else if (ref[1] == 'f' || ref[1] == 'F')
{
@@ -328,8 +328,8 @@ abort
yylval.symbol = symbol_find_or_make (name);
/* We have no need to check symbol properties. */
return SYMBOL;
- }
- }
+ }
+ }
[ \t\n] ;
"/*".*"*/" ;
. return yytext[0];
@@ -416,7 +416,7 @@ static long parse_int (char **end)
break;
/* The assembler allows for fractional constants to be created
- by either the 0.xxxx or the f#xxxx format
+ by either the 0.xxxx or the f#xxxx format
i.e. 0.5 would result in 0x4000
@@ -538,7 +538,7 @@ static int parse_halfreg (Register *r, i
/* Our start state is KEYWORD as we have
command keywords such as PREFETCH. */
-void
+void
set_start_state (void)
{
BEGIN KEYWORD;
@@ -548,7 +548,7 @@ set_start_state (void)
#ifndef yywrap
int
yywrap ()
-{
+{
return 1;
}
#endif
--- config/bfin-parse.y
+++ config/bfin-parse.y
@@ -170,7 +170,7 @@ void error (char *format, ...)
{
va_list ap;
static char buffer[2000];
-
+
va_start (ap, format);
vsprintf (buffer, format, ap);
va_end (ap);
@@ -297,7 +297,7 @@ check_macfuncs (Macfunc *aa, Opt_mode *o
return yyerror ("Bad opt mode");
/* If a0macfunc comes before a1macfunc, swap them. */
-
+
if (aa->n == 0)
{
/* (M) is not allowed here. */
@@ -353,7 +353,7 @@ check_macfuncs (Macfunc *aa, Opt_mode *o
/* Make sure first macfunc has got both P flags ORed. */
aa->P |= ab->P;
- return 0;
+ return 0;
}
@@ -478,7 +478,7 @@ dsp32shiftimm in slot1 and P-reg Store i
%token SHIFT LSHIFT ASHIFT BXORSHIFT
%token _GREATER_GREATER_GREATER_THAN_ASSIGN
%token ROT
-%token LESS_LESS GREATER_GREATER
+%token LESS_LESS GREATER_GREATER
%token _GREATER_GREATER_GREATER
%token _LESS_LESS_ASSIGN _GREATER_GREATER_ASSIGN
%token DIVS DIVQ
@@ -545,7 +545,7 @@ dsp32shiftimm in slot1 and P-reg Store i
%type <reg> a_plusassign
%type <reg> a_minusassign
%type <macfunc> multiply_halfregs
-%type <macfunc> assign_macfunc
+%type <macfunc> assign_macfunc
%type <macfunc> a_macfunc
%type <expr> expr_1
%type <instr> asm_1
@@ -566,11 +566,11 @@ dsp32shiftimm in slot1 and P-reg Store i
%type <reg> REG_A_DOUBLE_ZERO
%type <reg> REG_A_DOUBLE_ONE
%type <reg> REG_A
-%type <reg> STATUS_REG
+%type <reg> STATUS_REG
%type <expr> expr
%type <r0> xpmod
%type <r0> xpmod1
-%type <modcodes> smod
+%type <modcodes> smod
%type <modcodes> b3_op
%type <modcodes> rnd_op
%type <modcodes> post_op
@@ -605,7 +605,7 @@ dsp32shiftimm in slot1 and P-reg Store i
%right TILDA BANG
%start statement
%%
-statement:
+statement:
| asm
{
insn = $1;
@@ -690,7 +690,7 @@ asm: asm_1 SEMICOLON
/* DSPMAC. */
-asm_1:
+asm_1:
MNOP
{
$$ = DSP32MAC (3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 0, 0, 0);
@@ -706,7 +706,7 @@ asm_1:
if ($1.n == 0)
{
- if ($2.MM)
+ if ($2.MM)
return yyerror ("(m) not allowed with a0 unit");
op1 = 3;
op0 = $1.op;
@@ -737,7 +737,7 @@ asm_1:
{
Register *dst;
- if (check_macfuncs (&$1, &$2, &$4, &$5) < 0)
+ if (check_macfuncs (&$1, &$2, &$4, &$5) < 0)
return -1;
notethat ("assign_macfunc (.), assign_macfunc (.)\n");
@@ -765,9 +765,9 @@ asm_1:
notethat ("dsp32alu: dregs = ( A0 += A1 )\n");
$$ = DSP32ALU (11, 0, 0, &$1, 0, 0, 0, 0, 0);
}
- else
+ else
return yyerror ("Register mismatch");
- }
+ }
| HALF_REG ASSIGN LPAREN a_plusassign REG_A RPAREN
{
if (!IS_A1 ($4) && IS_A1 ($5))
@@ -805,7 +805,7 @@ asm_1:
}
| LPAREN REG COMMA REG RPAREN ASSIGN BYTEOP16M LPAREN REG COLON expr COMMA
- REG COLON expr RPAREN aligndir
+ REG COLON expr RPAREN aligndir
{
if (!IS_DREG ($2) || !IS_DREG ($4))
return yyerror ("Dregs expected");
@@ -855,14 +855,14 @@ asm_1:
}
- | REG ASSIGN REG_A PLUS REG_A COMMA REG ASSIGN REG_A MINUS REG_A amod1
+ | REG ASSIGN REG_A PLUS REG_A COMMA REG ASSIGN REG_A MINUS REG_A amod1
{
if (IS_DREG ($1) && IS_DREG ($7) && !REG_SAME ($3, $5)
&& IS_A1 ($9) && !IS_A1 ($11))
{
notethat ("dsp32alu: dregs = A1 + A0 , dregs = A1 - A0 (amod1)\n");
$$ = DSP32ALU (17, 0, &$1, &$7, 0, 0, $12.s0, $12.x0, 0);
-
+
}
else if (IS_DREG ($1) && IS_DREG ($7) && !REG_SAME ($3, $5)
&& !IS_A1 ($9) && IS_A1 ($11))
@@ -876,7 +876,7 @@ asm_1:
| REG ASSIGN REG plus_minus REG COMMA REG ASSIGN REG plus_minus REG amod1
{
- if ($4.r0 == $10.r0)
+ if ($4.r0 == $10.r0)
return yyerror ("Operators must differ");
if (IS_DREG ($1) && IS_DREG ($3) && IS_DREG ($5)
@@ -892,15 +892,15 @@ asm_1:
/* Bar Operations. */
- | REG ASSIGN REG op_bar_op REG COMMA REG ASSIGN REG op_bar_op REG amod2
+ | REG ASSIGN REG op_bar_op REG COMMA REG ASSIGN REG op_bar_op REG amod2
{
if (!REG_SAME ($3, $9) || !REG_SAME ($5, $11))
return yyerror ("Differing source registers");
- if (!IS_DREG ($1) || !IS_DREG ($3) || !IS_DREG ($5) || !IS_DREG ($7))
+ if (!IS_DREG ($1) || !IS_DREG ($3) || !IS_DREG ($5) || !IS_DREG ($7))
return yyerror ("Dregs expected");
-
+
if ($4.r0 == 1 && $10.r0 == 2)
{
notethat ("dsp32alu: dregs = dregs .|. dregs , dregs = dregs .|. dregs (amod2)\n");
@@ -1063,7 +1063,7 @@ asm_1:
}
| HALF_REG ASSIGN HALF_REG ASSIGN SIGN LPAREN HALF_REG RPAREN STAR
- HALF_REG PLUS SIGN LPAREN HALF_REG RPAREN STAR HALF_REG
+ HALF_REG PLUS SIGN LPAREN HALF_REG RPAREN STAR HALF_REG
{
if (IS_HCOMPL ($1, $3) && IS_HCOMPL ($7, $14) && IS_HCOMPL ($10, $17))
{
@@ -1076,7 +1076,7 @@ asm_1:
else
return yyerror ("Dregs expected");
}
- | REG ASSIGN REG plus_minus REG amod1
+ | REG ASSIGN REG plus_minus REG amod1
{
if (IS_DREG ($1) && IS_DREG ($3) && IS_DREG ($5))
{
@@ -1187,7 +1187,7 @@ asm_1:
return yyerror ("Dregs expected");
}
- | a_assign REG_A
+ | a_assign REG_A
{
if (!REG_SAME ($1, $2))
{
@@ -1288,7 +1288,7 @@ asm_1:
notethat ("LDIMMhalf: regs = luimm16 (x)\n");
/* reg, H, S, Z. */
$$ = LDIMMHALF_R5 (&$1, 0, 1, 0, $3);
- }
+ }
}
else
{
@@ -1323,7 +1323,7 @@ asm_1:
return yyerror ("Register mismatch");
}
- | REG ASSIGN REG op_bar_op REG amod0
+ | REG ASSIGN REG op_bar_op REG amod0
{
if (IS_DREG ($1) && IS_DREG ($3) && IS_DREG ($5))
{
@@ -1554,7 +1554,7 @@ asm_1:
else
return yyerror ("Register mismatch");
}
-
+
/* COMP3 CCFLAG. */
| REG ASSIGN REG BAR REG
{
@@ -1766,7 +1766,7 @@ asm_1:
notethat ("CC2dreg: CC =! CC\n");
$$ = bfin_gen_cc2dreg (3, 0);
}
-
+
/* DSPMULT. */
| HALF_REG ASSIGN multiply_halfregs opt_mode
@@ -1790,12 +1790,12 @@ asm_1:
else
{
$$ = DSP32MULT (0, 0, $4.mod, 0, 0,
- 0, 0, IS_H ($3.s0), IS_H ($3.s1),
+ 0, 0, IS_H ($3.s0), IS_H ($3.s1),
&$1, 0, &$3.s0, &$3.s1, 1);
}
}
- | REG ASSIGN multiply_halfregs opt_mode
+ | REG ASSIGN multiply_halfregs opt_mode
{
/* Odd registers can use (M). */
if (!IS_DREG ($1))
@@ -1820,7 +1820,7 @@ asm_1:
{
notethat ("dsp32mult: dregs = multiply_halfregs opt_mode\n");
$$ = DSP32MULT (0, 0, $4.mod, 0, 1,
- 0, 0, IS_H ($3.s0), IS_H ($3.s1),
+ 0, 0, IS_H ($3.s0), IS_H ($3.s1),
&$1, 0, &$3.s0, &$3.s1, 1);
}
}
@@ -1828,7 +1828,7 @@ asm_1:
| HALF_REG ASSIGN multiply_halfregs opt_mode COMMA
HALF_REG ASSIGN multiply_halfregs opt_mode
{
- if (!IS_DREG ($1) || !IS_DREG ($6))
+ if (!IS_DREG ($1) || !IS_DREG ($6))
return yyerror ("Dregs expected");
if (!IS_HCOMPL($1, $6))
@@ -1856,7 +1856,7 @@ asm_1:
| REG ASSIGN multiply_halfregs opt_mode COMMA REG ASSIGN multiply_halfregs opt_mode
{
- if (!IS_DREG ($1) || !IS_DREG ($6))
+ if (!IS_DREG ($1) || !IS_DREG ($6))
return yyerror ("Dregs expected");
if ((IS_EVEN ($1) && $6.regno - $1.regno != 1)
@@ -1958,7 +1958,7 @@ asm_1:
else
return yyerror ("Bad shift value or register");
}
- | HALF_REG ASSIGN HALF_REG LESS_LESS expr smod
+ | HALF_REG ASSIGN HALF_REG LESS_LESS expr smod
{
if (IS_UIMM ($5, 4))
{
@@ -1990,7 +1990,7 @@ asm_1:
}
else
{
-
+
op = 2;
notethat ("dsp32shift: dregs = ASHIFT dregs BY dregs_lo (.)\n");
}
@@ -2053,7 +2053,7 @@ asm_1:
return yyerror ("Register mismatch");
}
- | REG ASSIGN EXTRACT LPAREN REG COMMA HALF_REG RPAREN xpmod
+ | REG ASSIGN EXTRACT LPAREN REG COMMA HALF_REG RPAREN xpmod
{
if (IS_DREG ($1) && IS_DREG ($5) && IS_DREG_L ($7))
{
@@ -2230,7 +2230,7 @@ asm_1:
return yyerror ("Register mismatch");
}
- | HALF_REG ASSIGN CCREG ASSIGN BXORSHIFT LPAREN REG_A COMMA REG RPAREN
+ | HALF_REG ASSIGN CCREG ASSIGN BXORSHIFT LPAREN REG_A COMMA REG RPAREN
{
if (IS_DREG ($1)
&& $7.regno == REG_A0
@@ -2289,7 +2289,7 @@ asm_1:
return yyerror ("Register mismatch");
}
- | a_assign ROT REG_A BY expr
+ | a_assign ROT REG_A BY expr
{
if (IS_IMM ($5, 6))
{
@@ -2300,7 +2300,7 @@ asm_1:
return yyerror ("Register mismatch");
}
- | REG ASSIGN ROT REG BY expr
+ | REG ASSIGN ROT REG BY expr
{
if (IS_DREG ($1) && IS_DREG ($4) && IS_IMM ($6, 6))
{
@@ -2342,9 +2342,9 @@ asm_1:
else
return yyerror ("Register mismatch");
}
-
+
/* The ASR bit is just inverted here. */
- | HALF_REG ASSIGN VIT_MAX LPAREN REG RPAREN asr_asl
+ | HALF_REG ASSIGN VIT_MAX LPAREN REG RPAREN asr_asl
{
if (IS_DREG_L ($1) && IS_DREG ($5))
{
@@ -2355,7 +2355,7 @@ asm_1:
return yyerror ("Register mismatch");
}
- | REG ASSIGN VIT_MAX LPAREN REG COMMA REG RPAREN asr_asl
+ | REG ASSIGN VIT_MAX LPAREN REG COMMA REG RPAREN asr_asl
{
if (IS_DREG ($1) && IS_DREG ($5) && IS_DREG ($7))
{
@@ -2971,7 +2971,7 @@ asm_1:
if ($4.r0)
tmp = unary (Expr_Op_Type_NEG, tmp);
-
+
if (in_range_p (tmp, -32768, 32767, 0))
{
notethat ("LDST: B [ pregs + imm16 ] = dregs\n");
@@ -2991,7 +2991,7 @@ asm_1:
return yyerror ("Dreg expected for source operand");
if (!IS_PREG ($3))
return yyerror ("Preg expected in address");
-
+
if ($4.r0)
tmp = unary (Expr_Op_Type_NEG, tmp);
@@ -3112,7 +3112,7 @@ asm_1:
}
else
return yyerror ("Displacement out of range");
- }
+ }
| HALF_REG ASSIGN W LBRACK REG post_op RBRACK
{
@@ -3216,7 +3216,7 @@ asm_1:
else
return yyerror ("Preg ++ Preg or Ireg ++ Mreg expected in address");
}
-
+
| W LBRACK REG _PLUS_PLUS REG RBRACK ASSIGN HALF_REG
{
if (!IS_DREG ($8))
@@ -3266,7 +3266,7 @@ asm_1:
$8.r0 ? 'X' : 'Z');
$$ = LDST (&$5, &$1, $6.x0, 2, $8.r0, 0);
}
-
+
| REG ASSIGN LBRACK REG _PLUS_PLUS REG RBRACK
{
if (!IS_DREG ($1))
@@ -3326,7 +3326,7 @@ asm_1:
{
notethat ("LDSTidxI: dpregs = [ pregs + imm18m4 ]\n");
$$ = LDSTIDXI (&$4, &$1, 0, 0, ispreg ? 1 : 0, tmp);
-
+
}
else
return yyerror ("Displacement out of range");
@@ -3460,7 +3460,7 @@ asm_1:
else
return yyerror ("Bad constant for LINK");
}
-
+
| UNLINK
{
notethat ("linkage: UNLINK\n");
@@ -3479,7 +3479,7 @@ asm_1:
}
else
return yyerror ("Bad register or values for LSETUP");
-
+
}
| LSETUP LPAREN expr COMMA expr RPAREN REG ASSIGN REG
{
@@ -3496,7 +3496,7 @@ asm_1:
| LSETUP LPAREN expr COMMA expr RPAREN REG ASSIGN REG GREATER_GREATER expr
{
if (IS_PCREL4 ($3) && IS_LPPCREL10 ($5)
- && IS_PREG ($9) && IS_CREG ($7)
+ && IS_PREG ($9) && IS_CREG ($7)
&& EXPR_VALUE ($11) == 1)
{
notethat ("LoopSetup: LSETUP (pcrel4 , lppcrel10 ) counters = pregs >> 1\n");
@@ -3581,7 +3581,7 @@ asm_1:
notethat ("pseudoDEBUG: DBGCMPLX (dregs )\n");
$$ = bfin_gen_pseudodbg (3, 6, $3.regno & CODE_MASK);
}
-
+
| DBGHALT
{
notethat ("psedoDEBUG: DBGHALT\n");
@@ -3685,7 +3685,7 @@ sco:
$$.x0 = 1;
}
| SCO
- {
+ {
$$.s0 = 1;
$$.x0 = 1;
}
@@ -3975,7 +3975,7 @@ min_max:
$$.r0 = 0;
}
;
-
+
op_bar_op:
_PLUS_BAR_PLUS
{
@@ -4096,8 +4096,8 @@ b3_op:
post_op:
{
$$.x0 = 2;
- }
- | _PLUS_PLUS
+ }
+ | _PLUS_PLUS
{
$$.x0 = 0;
}
@@ -4374,7 +4374,7 @@ expr_1: expr_1 STAR expr_1
}
| expr_1 LESS_LESS expr_1
{
- $$ = binary (Expr_Op_Type_Lshift, $1, $3);
+ $$ = binary (Expr_Op_Type_Lshift, $1, $3);
}
| expr_1 GREATER_GREATER expr_1
{
@@ -4392,7 +4392,7 @@ expr_1: expr_1 STAR expr_1
{
$$ = binary (Expr_Op_Type_BOR, $1, $3);
}
- | eterm
+ | eterm
{
$$ = $1;
}
@@ -4416,12 +4416,12 @@ value_match (Expr_Node *exp, int sz, int
int umax = (1 << sz) - 1;
int min = -1 << (sz - 1);
int max = (1 << (sz - 1)) - 1;
-
+
int v = (EXPR_VALUE (exp)) & 0xffffffff;
if ((v % mul) != 0)
{
- error ("%s:%d: Value Error -- Must align to %d\n", __FILE__, __LINE__, mul);
+ error ("%s:%d: Value Error -- Must align to %d\n", __FILE__, __LINE__, mul);
return 0;
}
@@ -4439,7 +4439,7 @@ value_match (Expr_Node *exp, int sz, int
#endif
return 0;
}
- if (v <= umax && v >= 0)
+ if (v <= umax && v >= 0)
return 1;
#ifdef DEBUG
fprintf(stderr, "unsigned value %lx out of range\n", v * mul);
@@ -4458,43 +4458,43 @@ binary (Expr_Op_Type op, Expr_Node *x, E
{
switch (op)
{
- case Expr_Op_Type_Add:
+ case Expr_Op_Type_Add:
x->value.i_value += y->value.i_value;
break;
- case Expr_Op_Type_Sub:
+ case Expr_Op_Type_Sub:
x->value.i_value -= y->value.i_value;
break;
- case Expr_Op_Type_Mult:
+ case Expr_Op_Type_Mult:
x->value.i_value *= y->value.i_value;
break;
- case Expr_Op_Type_Div:
+ case Expr_Op_Type_Div:
if (y->value.i_value == 0)
error ("Illegal Expression: Division by zero.");
else
x->value.i_value /= y->value.i_value;
break;
- case Expr_Op_Type_Mod:
+ case Expr_Op_Type_Mod:
x->value.i_value %= y->value.i_value;
break;
- case Expr_Op_Type_Lshift:
+ case Expr_Op_Type_Lshift:
x->value.i_value <<= y->value.i_value;
break;
- case Expr_Op_Type_Rshift:
+ case Expr_Op_Type_Rshift:
x->value.i_value >>= y->value.i_value;
break;
- case Expr_Op_Type_BAND:
+ case Expr_Op_Type_BAND:
x->value.i_value &= y->value.i_value;
break;
- case Expr_Op_Type_BOR:
+ case Expr_Op_Type_BOR:
x->value.i_value |= y->value.i_value;
break;
- case Expr_Op_Type_BXOR:
+ case Expr_Op_Type_BXOR:
x->value.i_value ^= y->value.i_value;
break;
- case Expr_Op_Type_LAND:
+ case Expr_Op_Type_LAND:
x->value.i_value = x->value.i_value && y->value.i_value;
break;
- case Expr_Op_Type_LOR:
+ case Expr_Op_Type_LOR:
x->value.i_value = x->value.i_value || y->value.i_value;
break;
@@ -4532,13 +4532,13 @@ binary (Expr_Op_Type op, Expr_Node *x, E
}
static Expr_Node *
-unary (Expr_Op_Type op, Expr_Node *x)
+unary (Expr_Op_Type op, Expr_Node *x)
{
if (x->type == Expr_Node_Constant)
{
switch (op)
{
- case Expr_Op_Type_NEG:
+ case Expr_Op_Type_NEG:
x->value.i_value = -x->value.i_value;
break;
case Expr_Op_Type_COMP:
--- config/tc-bfin.c
+++ config/tc-bfin.c
@@ -85,7 +85,7 @@ bfin_pic_ptr (int nbytes)
do
{
bfd_reloc_code_real_type reloc_type = BFD_RELOC_BFIN_FUNCDESC;
-
+
if (strncasecmp (input_line_pointer, "funcdesc(", 9) == 0)
{
input_line_pointer += 9;
@@ -447,7 +447,7 @@ md_begin ()
/* Ensure that lines can begin with '(', for multiple
register stack pops. */
lex_type ['('] = LEX_BEGIN_NAME;
-
+
#ifdef OBJ_ELF
record_alignment (text_section, 2);
record_alignment (data_section, 2);
@@ -460,7 +460,7 @@ md_begin ()
#ifdef DEBUG
extern int debug_codeselection;
debug_codeselection = 1;
-#endif
+#endif
last_insn_size = 0;
}
@@ -850,11 +850,11 @@ md_pcrel_from_section (fixP, sec)
/* Return true if the fix can be handled by GAS, false if it must
be passed through to the linker. */
-bfd_boolean
+bfd_boolean
bfin_fix_adjustable (fixS *fixP)
-{
+{
switch (fixP->fx_r_type)
- {
+ {
/* Adjust_reloc_syms doesn't know about the GOT. */
case BFD_RELOC_BFIN_GOT:
case BFD_RELOC_BFIN_PLTPC:
@@ -862,10 +862,10 @@ bfin_fix_adjustable (fixS *fixP)
case BFD_RELOC_VTABLE_INHERIT:
case BFD_RELOC_VTABLE_ENTRY:
return 0;
-
+
default:
return 1;
- }
+ }
}
/* Special extra functions that help bfin-parse.y perform its job. */
@@ -1946,7 +1946,7 @@ bfin_start_label (char *s, char *ptr)
}
return TRUE;
-}
+}
int
bfin_force_relocation (struct fix *fixp)
@@ -2439,7 +2439,7 @@ decode_dsp32alu_0 (int iw0, int iw1)
else if (aop == 0 && aopcde == 24)
return DREG_MASK (dst0);
- else if (aop == 1 && aopcde == 24)
+ else if (aop == 1 && aopcde == 24)
return DREG_MASK (dst0) | DREG_MASK (dst1);
else if (aopcde == 13)
return DREG_MASK (dst0) | DREG_MASK (dst1);
--- config/tc-bfin.h
+++ config/tc-bfin.h
@@ -28,11 +28,11 @@
/*
* Define the target format macro here. The value for this should be
- * "elf32-bfin", not "elf32-little-bfin". Since the BFD source file
+ * "elf32-bfin", not "elf32-little-bfin". Since the BFD source file
* elf32-bfin.c defines TARGET_LITTLE_NAME to be "elf32-little-bfin",
* we must use this value, until this is corrected and BFD is rebuilt. */
#ifdef OBJ_ELF
-#define TARGET_FORMAT "elf32-bfin"
+#define TARGET_FORMAT "elf32-bfin"
#endif
#define LISTING_HEADER "BFIN GAS "
@@ -53,7 +53,7 @@ extern bfd_boolean bfin_eol_in_insn (cha
/* Almost all instructions of Blackfin contain an = character. */
#define TC_EQUAL_IN_INSN(C, NAME) 1
-#define NOP_OPCODE 0x0000
+#define NOP_OPCODE 0x0000
#define LOCAL_LABELS_FB 1
Attachment:
signature.asc
Description: This is a digitally signed message part.
| Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
|---|---|---|
| Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |