This is the mail archive of the
binutils@sources.redhat.com
mailing list for the binutils project.
[patch] top level: blow away bsp, libstub, cygmon
- From: Nathanael Nerode <neroden at doctormoo dot dyndns dot org>
- To: gcc-patches at gcc dot gnu dot org
- Cc: gdb-patches at sources dot redhat dot com, binutils at sources dot redhat dot com,dj at redhat dot com
- Date: Mon, 8 Jul 2002 08:22:10 -0400
- Subject: [patch] top level: blow away bsp, libstub, cygmon
I was told that bsp, cygmon, and libstub were obselete. So here goes.
Tested on i686-pc-linux-gnu, doesn't seem to break anything.
2002-07-08 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.in: Remove references to bsp, cygmon, libstub.
* configure.in: Ditto.
* configure.in: Remove leftover reference to gdbtest.
Index: Makefile.in
===================================================================
RCS file: /cvs/gcc/gcc/Makefile.in,v
retrieving revision 1.108
diff -u -r1.108 Makefile.in
--- Makefile.in 2 Jul 2002 18:01:37 -0000 1.108
+++ Makefile.in 8 Jul 2002 12:16:56 -0000
@@ -186,7 +190,7 @@
# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes bsp libstub cygmon libf2c libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes libf2c libobjc
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
@@ -768,14 +772,11 @@
all-target-libiberty \
all-target-gperf \
all-target-examples \
- all-target-libstub \
all-target-libffi \
all-target-libjava \
all-target-zlib \
all-target-boehm-gc \
- all-target-qthreads \
- all-target-bsp \
- all-target-cygmon
+ all-target-qthreads
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
@@ -790,14 +791,11 @@
configure-target-libiberty \
configure-target-gperf \
configure-target-examples \
- configure-target-libstub \
configure-target-libffi \
configure-target-libjava \
configure-target-zlib \
configure-target-boehm-gc \
- configure-target-qthreads \
- configure-target-bsp \
- configure-target-cygmon
+ configure-target-qthreads
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
@@ -826,7 +824,6 @@
install-target-winsup \
install-target-libgloss \
install-target-libiberty \
- install-target-bsp \
install-target-libjava \
install-target-zlib \
install-target-boehm-gc \
@@ -908,14 +905,11 @@
clean-target-libiberty \
clean-target-gperf \
clean-target-examples \
- clean-target-libstub \
clean-target-libffi \
clean-target-libjava \
clean-target-zlib \
clean-target-boehm-gc \
- clean-target-qthreads \
- clean-target-bsp \
- clean-target-cygmon
+ clean-target-qthreads
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
@@ -1672,12 +1666,8 @@
all-bison: all-texinfo
configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
all-target-boehm-gc: configure-target-boehm-gc
-configure-target-bsp: $(ALL_GCC_C)
-all-target-bsp: configure-target-bsp
all-byacc:
all-bzip2:
-configure-target-cygmon: $(ALL_GCC_C)
-all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
@@ -1723,8 +1713,6 @@
all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
-configure-target-libstub: $(ALL_GCC_C)
-all-target-libstub: configure-target-libstub
all-libtool:
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: configure-target-libf2c all-target-libiberty
--- configure.in.old Thu Jul 4 13:16:30 2002
+++ configure.in Mon Jul 8 08:13:15 2002
@@ -94,7 +94,7 @@
# directories to be built in a cross environment only
#
-cross_only="target-libgloss target-newlib target-cygmon target-opcodes target-libstub"
+cross_only="target-libgloss target-newlib target-opcodes"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
@@ -396,15 +396,9 @@
;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
;;
frv-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
@@ -440,9 +434,6 @@
;;
i[3456]86-*-coff | i[3456]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
;;
i[34567]86-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -515,15 +506,9 @@
;;
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
m68k-*-coff*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
;;
mcore-*-pe*)
# The EPOC C++ environment does not support exceptions or rtti,
@@ -535,15 +520,9 @@
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
;;
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
@@ -564,9 +543,6 @@
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
@@ -600,7 +576,6 @@
;;
mipstx39-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-libffi"
@@ -624,27 +599,18 @@
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
sparc-*-elf*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-libstub target-cygmon"
- fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparclite-*-*)
- if test x${is_cross_compiler} != xno ; then
- target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
- fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
else
use_gnu_ld=no
fi