From c203ce7f8614226bc2f76f0eba3797e43add3de6 Mon Sep 17 00:00:00 2001 From: David Teigland Date: Tue, 13 Nov 2018 16:17:17 -0600 Subject: [PATCH] man: remove clvmd man page --- man/Makefile.in | 1 - man/clvmd.8_main | 204 ----------------------------------------------- 2 files changed, 205 deletions(-) delete mode 100644 man/clvmd.8_main diff --git a/man/Makefile.in b/man/Makefile.in index 6d5e2ac8f..25e6fa6de 100644 --- a/man/Makefile.in +++ b/man/Makefile.in @@ -159,7 +159,6 @@ $(Q)$(SED) -e "s+#VERSION#+$(LVM_VERSION)+" \ -e "s+#DEFAULT_PROFILE_DIR#+$(DEFAULT_PROFILE_DIR)+" \ -e "s+#DEFAULT_CACHE_DIR#+$(DEFAULT_CACHE_DIR)+" \ -e "s+#DEFAULT_LOCK_DIR#+$(DEFAULT_LOCK_DIR)+" \ - -e "s+#CLVMD_PATH#+$(exec_prefix)/clvmd+" \ -e "s+#LVM_PATH#+$(exec_prefix)/lvm+" \ -e "s+#DEFAULT_RUN_DIR#+$(DEFAULT_RUN_DIR)+" \ -e "s+#DEFAULT_PID_DIR#+$(DEFAULT_PID_DIR)+" \ diff --git a/man/clvmd.8_main b/man/clvmd.8_main deleted file mode 100644 index de6ce25fa..000000000 --- a/man/clvmd.8_main +++ /dev/null @@ -1,204 +0,0 @@ -.TH CLVMD 8 "LVM TOOLS #VERSION#" "Red Hat Inc" \" -*- nroff -*- -. -.SH NAME -. -clvmd \(em cluster LVM daemon -. -.SH SYNOPSIS -. -.ad l -.B clvmd -.RB [ -C ] -.RB [ -d -.RI [ value ]] -.RB [ -E -.IR lock_uuid ] -.RB [ -f ] -.RB [ -h ] -.RB [ -I -.IR cluster_manager ] -.RB [ -R ] -.RB [ -S ] -.RB [ -t -.IR timeout ] -.RB [ -T -.IR start_timeout ] -.RB [ -V ] -.ad b -. -.SH DESCRIPTION -. -clvmd is the daemon that distributes LVM metadata updates around a cluster. -It must be running on all nodes in the cluster and will give an error -if a node in the cluster does not have this daemon running. - -Also see \fBlvmlockd\fP(8) for a newer method of using LVM on shared -storage. -. -.SH OPTIONS -. -.HP -.BR -C -.br -Only valid if \fB-d\fP is also specified. -Tells all clvmds in a cluster to enable/disable debug logging. -Without this switch, only the local clvmd will change its debug level to that -given with \fB-d\fP. -.br -This does not work correctly if specified on the command-line that starts clvmd. -If you want to start clvmd \fBand\fP -enable cluster-wide logging then the command needs to be issued twice, eg: -.br -.BR clvmd -.br -.BR clvmd\ -d2 -. -.HP -.BR -d -.RI [ value ] -.br -Set debug logging level. -If \fB-d\fP is specified without a \fIvalue\fP -then 1 is assumed. \fIValue\fP can be: -.PD 0 -.IP -.BR 0 -\(em Disabled -.IP -.BR 1 -\(em Sends debug logs to stderr (implies \fB-f\fP) -.IP -.BR 2 -\(em Sends debug logs to \fBsyslog\fP(3) -.PD -. -.HP -.BR -E -.IR lock_uuid -.br -Pass lock uuid to be reacquired exclusively when clvmd is restarted. -. -.HP -.BR -f -.br -Don't fork, run in the foreground. -. -.HP -.BR -h -.br -Show help information. -. -.HP -.BR -I -.IR cluster_manager -.br -Selects the cluster manager to use for locking and internal -communications. As it is quite possible to have multiple managers available on -the same system you might have to manually specify this option to override the -search. - -By default, omit \fB-I\fP is equivalent to \fB-Iauto\fP. -Clvmd will use the first cluster manager that succeeds, -and it checks them in a predefined order -.BR cman , -.BR corosync , -.BR openais . -The available managers will be listed by order as part of the -\fBclvmd -h\fP output. -. -.HP -.BR -R -.br -Tells all the running instance of \fBclvmd\fP in the cluster to reload their device cache and -re-read the lvm configuration file \fBlvm.conf\fP(5). This command should be run whenever the -devices on a cluster system are changed. -. -.HP -.BR -S -.br -Tells the running \fBclvmd\fP to exit and reexecute itself, for example at the -end of a package upgrade. The new instance is instructed to reacquire -any locks in the same state as they were previously held. (Alternative -methods of restarting the daemon have the side effect of changing -exclusive LV locks into shared locks.) -. -.HP -.BR -t -.IR timeout -.br -Specifies the \fItimeout\fP for commands to run around the cluster. This should not -be so small that commands with many disk updates to do will fail, so you -may need to increase this on systems with very large disk farms. -The default is 60 seconds. -. -.HP -.BR -T -.IR start_timeout -.br -Specifies the start timeout for \fBclvmd\fP daemon startup. If the -daemon does not report that it has started up within this time then the parent -command will exit with status of 5. This does NOT mean that \fBclvmd\fP has -not started! What it means is that the startup has been delayed for some -reason; the most likely cause of this is an inquorate cluster though it -could be due to locking latencies on a cluster with large numbers of logical -volumes. If you get the return code of 5 it is usually not necessary to -restart \fBclvmd\fP it will start as soon as that blockage has cleared. -This flag is to allow startup scripts to exit in a timely fashion even if the -cluster is stalled for some reason. - -The default is \fB0\fP (no timeout) and the value is in seconds. Don't set this too -small or you will experience spurious errors. 10 or 20 seconds might be -sensible. - -This timeout will be ignored if you start \fBclvmd\fP with the \fB-d\fP. -. -.HP -.BR -V -.br -Display the version of the cluster LVM daemon. -. -.SH NOTES -. -.SS Activation -. -In a clustered VG, clvmd is used for activation, and the following values are -possible with \fBlvchange/vgchange -a\fP: -.IP \fBy\fP|\fBsy\fP -clvmd activates the LV in shared mode (with a shared lock), -allowing multiple nodes to activate the LV concurrently. -If the LV type prohibits shared access, such as an LV with a snapshot, -an exclusive lock is automatically used instead. -clvmd attempts to activate the LV concurrently on all nodes. -.IP \fBey\fP -clvmd activates the LV in exclusive mode (with an exclusive lock), -allowing a single node to activate the LV. -clvmd attempts to activate the LV concurrently on all nodes, but only -one will succeed. -.IP \fBly\fP -clvmd attempts to activate the LV only on the local node. -If the LV type allows concurrent access, then shared mode is used, -otherwise exclusive. -.IP \fBn\fP -clvmd attempts to deactivate the LV on all nodes. -.IP \fBln\fP -clvmd attempts to deactivate the LV on the local node. -. -.SH ENVIRONMENT VARIABLES -.TP -.B LVM_CLVMD_BINARY -The CLVMD binary to use when \fBclvmd\fP restart is requested. -Defaults to \fI#CLVMD_PATH#\fP. -.TP -.B LVM_BINARY -The LVM2 binary to use. -Defaults to \fI#LVM_PATH#\fP. -.SH FILES -.I #CLVMD_PATH# -.br -.I #LVM_PATH# -.SH SEE ALSO -.BR syslog (3), -.BR lvm.conf (5), -.BR lvm (8), -.BR lvmlockd (8), -.BR lvmsystemid (7) -- 2.43.5