From 4157cae5f859f1a45df15f2d136b7607a974825e Mon Sep 17 00:00:00 2001 From: Brian Inglis Date: Tue, 24 Nov 2020 23:49:30 -0700 Subject: [PATCH] specialnames.xml: add proc(5) Cygwin man page --- winsup/doc/specialnames.xml | 2094 +++++++++++++++++++++++++++++++++++ 1 file changed, 2094 insertions(+) diff --git a/winsup/doc/specialnames.xml b/winsup/doc/specialnames.xml index a1f7401e1..a1f9d3f5e 100644 --- a/winsup/doc/specialnames.xml +++ b/winsup/doc/specialnames.xml @@ -486,6 +486,2100 @@ one in Linux, but it provides significant capabilities. The procps package contains several utilities that use it. + + + + + + + + + + + + + 2020-11-24 + Cygwin Project + + + proc + 5 + 2020-11-24 + Cygwin + Cygwin User's Manual + + + + proc + process and system information pseudo-filesystem + + + + Description + The proc filesystem is a pseudo-filesystem + which provides an interface to Cygwin data structures. + It is commonly mounted at /proc. + Typically, it is mounted automatically by the system. + + + + Overview + Underneath /proc, there are the following + general groups of files and subdirectories: + + + + + /proc/[pid] subdirectories + + Each one of these subdirectories contains files and + subdirectories exposing information about the process with the + corresponding process id. + + + The /proc/[pid] subdirectories are + visible when iterating through /proc with + + readdir2 + + (and thus are visible when one uses + + ls1 + + to view the contents of /proc). + + + + + + /proc/self + + When a process accesses this magic symbolic link, it resolves + to the process's own /proc/[pid] directory. + + + + + + /proc/[a-z]* + + Various other files and subdirectories under + /proc expose system-wide information. + + + + + + + All of the above are described in more detail below. + + + + + + Files and directories + + The following list provides details of many of the files + and directories under the /proc hierarchy. + + + + + /proc/[pid] + + + There is a numerical subdirectory for each running + process; the subdirectory is named by the process id. + Each /proc/[pid] subdirectory + contains the pseudo-files and directories described below. + + + The files inside each /proc/[pid] + directory are normally owned by the effective user and + effective group id of the process. + + + + + + /proc/[pid]/cmdline + + This read-only file holds the complete command line for the + process, unless the process is a zombie. + In the latter case, there is nothing in this file: that is, a + read on this file will return 0 characters. + The command-line arguments appear in this file as a set of + strings followed by null bytes ('\0'). + + + + + + /proc/[pid]/ctty + + + This read-only file holds the name of the console or control + terminal device for the process, unless the process is detached + from any terminal. + In the latter case, there is only a newline in this file. + + + + + + /proc/[pid]/cwd + + + This is a symbolic link to the current working directory of the + process. + To find out the current working directory of process 20, for + instance, you can do this: + + + $ cd /proc/20/cwd; /bin/pwd + + + + Note that the pwd command + is often a shell built-in, and might not work properly. In + + bash1 + , + you may use pwd -P. + + + + + /proc/[pid]/environ + + + This read-only file contains the current environment that may + have been changed by the currently executing program. + The entries are separated by null bytes ('\0'), + and there may be a null byte at the end. + Thus, to print out the environment of process 1, you would do: + + + $ cat -A /proc/1/environ + + + + If, after an + + execve2 + , + the process modifies its environment (e.g., by calling + functions such as + + putenv3 + + or modifying the + + environ7 + + variable directly), this file will reflect those changes. + That may not be the case on other systems such as Linux. + + + + + /proc/[pid]/exe + + + This file is a symbolic link containing the actual pathname of + the executed command. + This symbolic link can be dereferenced normally; attempting to + open it will open the executable. + You can even type /proc/[pid]/exe + to run another copy of the same executable that is being run by + process [pid]. + /proc/[pid]/exe is a pointer to + the binary which was executed, and appears as a symbolic link. + + + + + + /proc/[pid]/exename + + + This read-only file contains the actual pathname of the executed + command. + + + + + + /proc/[pid]/fd/ + + + This is a subdirectory containing one entry for each + file which the process has open, named by its file + descriptor, and which is a symbolic link to the actual + file. + Thus, 0 is standard input, 1 standard output, 2 standard + error, and so on. + + + + For file descriptors for pipes and sockets, the entries will + be symbolic links whose content is the file type with the + inode. A + + readlink2 + + call on this file returns a string in the format: + type:[inode] + + + For example, socket:[2248868] + will be a socket and its inode is 2248868. + + + + Programs that take a filename as a command-line argument, but + don't take input from standard input if no argument is supplied, + and programs that write to a file named as a command-line + argument, but don't send their output to standard output if no + argument is supplied, can nevertheless be made to use standard + input or standard output by using + /proc/[pid]/fd files as command-line + arguments. + For example, assuming that is the flag + designating an input file and is the flag + designating an output file: + + + $ foobar -i /proc/self/fd/0 -o /proc/self/fd/1 ... + + + and you have a working filter. + + + /proc/self/fd/N is approximately + the same as /dev/fd/N in some Unix + and Unix-like systems. + Most Linux makedev scripts symbolically + link /dev/fd to + /proc/self/fd, in fact. + + + Most systems provide symbolic links + /dev/stdin, + /dev/stdout, and + /dev/stderr, which respectively link + to the files 0, 1, + and 2 in /proc/self/fd. + Thus the example command above could be written as: + + + $ foobar -i /dev/stdin -o /dev/stdout ... + + + + + Note that for file descriptors referring to inodes (pipes and + sockets, see above), those inodes still have permission bits and + ownership information distinct from those of the + /proc/[pid]/fd entry, and that the + owner may differ from the user and group ids of the process. + An unprivileged process may lack permissions to open them, as in + this example: + + + $ echo test | sudo -u nobody cat + test + $ echo test | sudo -u nobody cat /proc/self/fd/0 + cat: /proc/self/fd/0: Permission denied + + + + + File descriptor 0 refers to the pipe created by the shell and + owned by that shell's user, which is not + nobody, so cat + does not have permission to create a new file descriptor to + read from that inode, even though it can still read from its + existing file descriptor 0. + + + + + + /proc/[pid]/gid + + + This read-only file contains the primary group id for the + process. + + + + + + /proc/[pid]/maps + + + A file containing the currently mapped memory regions and their + access permissions. See + + mmap2 + + for some further information about memory mappings. + + + The format of the file is: + + +address perms offset dev inode pathname + +00010000-00020000 rw-s 00000000 0000:0000 0 [win heap 1 default shared] +... +00080000-00082000 rw-p 00000000 0000:0000 0 [win heap 0 default grow] +00082000-0009A000 ===p 00002000 0000:0000 0 [win heap 0 default grow] +000A0000-000A1000 rw-p 00000000 0000:0000 0 [win heap 2 grow] +000A1000-000BA000 ===p 00001000 0000:0000 0 [win heap 2 grow] +000C0000-000D9000 rw-p 00000000 0000:0000 0 [win heap 0 default grow] +000D9000-001C0000 ===p 00019000 0000:0000 0 [win heap 0 default grow] +00200000-00377000 ===p 00000000 0000:0000 0 +00377000-00378000 rw-p 00177000 0000:0000 0 [peb] +00378000-0037A000 rw-p 00178000 0000:0000 0 [teb (tid 8844)] +... +00400000-005F9000 ===p 00000000 0000:0000 0 [stack (tid 8884)] +005F9000-005FC000 rw-g 001F9000 0000:0000 0 [stack (tid 8884)] +005FC000-00600000 rw-p 001FC000 0000:0000 0 [stack (tid 8884)] +00600000-006C7000 r--s 00000000 EE45:4341 281474976741117 /proc/cygdrive/c/Windows/System32/locale.nls +... +100400000-100401000 r--p 00000000 EE45:4341 281474978095037 /usr/bin/sh.exe +100401000-100413000 r-xp 00001000 EE45:4341 281474978095037 /usr/bin/sh.exe +100413000-100414000 rw-p 00013000 EE45:4341 281474978095037 /usr/bin/sh.exe +... +180010000-180020000 rw-s 00000000 0000:0000 0 [procinfo] +180020000-180029000 rw-s 00000000 0000:0000 0 [cygwin-user-shared] +180030000-18003C000 rw-s 00000000 0000:0000 0 [cygwin-shared] +180040000-180041000 r--p 00000000 EE45:4341 2251799814294868 /usr/bin/cygwin1.dll +180041000-18022D000 r-xp 00001000 EE45:4341 2251799814294868 /usr/bin/cygwin1.dll +18022D000-180231000 rwxp 001ED000 EE45:4341 2251799814294868 /usr/bin/cygwin1.dll +180231000-18026A000 rw-p 001F1000 EE45:4341 2251799814294868 /usr/bin/cygwin1.dll +... +800000000-800090000 rw-p 00000000 0000:0000 0 [heap] +800090000-820000000 ===p 00090000 0000:0000 0 [heap] +7FF4FDEB0000-7FF4FDEB5000 r--s 00000000 0000:0000 0 +7FF4FDEB5000-7FF4FDFB0000 ===s 00005000 0000:0000 0 +7FF4FDFB0000-7FF5FDFD0000 ===p 00000000 0000:0000 0 +... +7FFBEEAC0000-7FFBEEAC1000 r--p 00000000 EE45:4341 844424934724994 /proc/cygdrive/c/Windows/System32/kernel32.dll +7FFBEEAC1000-7FFBEEB36000 r-xp 00001000 EE45:4341 844424934724994 /proc/cygdrive/c/Windows/System32/kernel32.dll +7FFBEEB36000-7FFBEEB68000 r--p 00076000 EE45:4341 844424934724994 /proc/cygdrive/c/Windows/System32/kernel32.dll +7FFBEEB68000-7FFBEEB6A000 rw-p 000A8000 EE45:4341 844424934724994 /proc/cygdrive/c/Windows/System32/kernel32.dll +7FFBEEB6A000-7FFBEEB72000 r--p 000AA000 EE45:4341 844424934724994 /proc/cygdrive/c/Windows/System32/kernel32.dll +... + + + + + The address field is the address + space in the process that the mapping occupies. + The perms field is a set of permissions: + + + + rread + + + + wwrite + + + + xexecute + + + + ===reserved + + + + sshared + + + + gguard + + + + pprivate + + + + + The offset field is the offset + into the file/whatever; + dev is the device (major:minor); + inode is the inode on that device. + 0 indicates that no inode is associated with the memory + region, as would be the case with BSS (uninitialized data). + + + The pathname field will usually + be the file that is backing the mapping. + + + There are additional helpful pseudo-paths: + + + [cygwin-shared] + + Global shared Cygwin process information. + + + + + [cygwin-user-shared] + + Global shared Cygwin user information. + + + + + [peb] + + Windows Process Environment Block. + + + + + [procinfo] + + Cygwin process information. + + + + + [shared-user-data] + + Shared user information. + + + + + [heap] + + The process's heap. + + + + + [stack] + + + The initial process's (also known as the main + thread's) stack. + + + + + + [stack + (tid <tid>)] + + + + A thread's stack (where the + <tid> is a thread id). + + + + + + [teb + (tid <tid>)] + + + + Windows Thread Environment Block (where + <tid> is a thread id). + + + + + + [win heap <n> + default shared exec grow noserial debug] + + + + Windows extended heap (where + <n> is a heap id) + and the rest of the words are heap flags: + + + + default + + default heap flags + + + + + shared + + shareable and mapped heap flags + + + + + exec + + executable heap flag + + + + + grow + + growable heap flag + + + + + noserial + + do not serialize heap flag + + + + + debug + + debugged heap flag + + + + + + + + + + + + If the pathname field is blank, + this is an anonymous mapping as obtained via + + mmap2 + . + There is no easy way to coordinate this back to a process's + source, short of running it through + + gdb1 + , + + strace1 + , + or similar. + + + + pathname is shown unescaped except + for newline characters, which are replaced with an + octal escape sequence. + As a result, it is not possible to determine whether the + original pathname contained a newline + character or the literal \e012 + character sequence. + + + + If the mapping is file-backed and the file has been deleted, + the string " (deleted)" + is appended to the pathname. + Note that this is ambiguous too. + + + + + + /proc/[pid]/mountinfo + + + This file contains information about mount points in the + process's mount namespace (see + + mount_namespaces7 + ). + It supplies various information (e.g., propagation state, root + of mount for bind mounts, identifier for each mount and its + parent) that is missing from the (older) + /proc/[pid]/mounts + file, and fixes various other problems with that file (e.g., + nonextensibility, failure to distinguish per-mount versus + per-superblock options). + + + The file contains lines of the form: + + + +36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue +(1)(2)(3) (4) (5) (6) (?) (7) (8) (9) (10) + + + + + The numbers in parentheses are labels for the descriptions below: + + + + (1) + + mount id: a unique id for the mount (may be reused after + + umount2 + ). + + + + + + (2) + + parent id: the id of the parent mount (or of self for + the root of this mount namespace's mount tree). + + + + + + (3) + + major:minor: + the value of st_dev + for files on this filesystem (see + + stat2 + ). + + + + + + (4) + + root: the pathname of the directory in the filesystem + which forms the root of this mount. + + + + + + (5) + + mount point: the pathname of the mount point relative to + the process's root directory. + + + + + + (6) + + mount options: per-mount options (see + + mount2 + ). + + + + + + (?) + + optional fields: zero or more fields of the form + "tag[:value]"; + see below. + + + + + + (7) + + separator: the end of the optional fields is marked by a + single hyphen. + + + + + + (8) + + filesystem type: the filesystem type in the form + "type[.subtype]". + + + + + + (9) + + mount source: filesystem-specific information or + "none". + + + + + + (10) + + super options: per-superblock options (see + + mount2 + ). + + + + + + + + + + + /proc/[pid]/mounts + + + This file lists all the filesystems currently mounted in the + process's mount namespace (see + + mount_namespaces7 + ). + The format of this file is documented in + + fstab5 + . + + + + + + /proc/[pid]/pgid + + + This read-only file contains the process group id for the + process. + + + + + + /proc/[pid]/ppid + + + This read-only file contains the parent process id for the + process. + + + + + + /proc/[pid]/root + + + UNIX and Linux support the idea of a per-process root of the + filesystem, set by the + + chroot2 + system call. + This file is a symbolic link that points to the process's root + directory, and behaves in the same way as + exe, and + fd/*. + + + + + + /proc/[pid]/sid + + + This read-only file contains the session id for the process. + + + + + + /proc/[pid]/stat + + + Status information about the process. + This is used by some implementations of + + ps1 + . + + + + The fields, in order, with their proper + + scanf3 + format specifiers, are listed below. + + + + + (1) pid %d + + The process id. + + + + + (2) comm %s + + + The filename of the executable, in parentheses. + This is visible whether or not the executable is swapped + out. + + + + + + (3) state %c + + + One of the following characters, indicating process state: + + + + + R + + Runnable + + + + + O + + Running + + + + + S + + Sleeping in an interruptible wait + + + + + D + + Waiting in uninterruptible disk sleep + + + + + Z + + Zombie + + + + + T + + Stopped (on a signal) or trace stopped + + + + + + + + (4) ppid %d + + The PID of the parent of this process. + + + + + (5) pgrp %d + + The process group id of the process. + + + + + (6) session %d + + The session id of the process. + + + + + (7) tty_nr %d + + + The controlling terminal of the process. + (The minor device number is contained in the combination + of bits 31 to 20 and 7 to 0; the major device number is in + bits 15 to 8.) + + + + + + (8) tpgid %d + + + The id of the foreground process group of the controlling + terminal of the process. + + + + + + (9) flags %u + + The kernel flags word of the process. + + + + + (10) minflt %lu + + + The number of minor faults the process has made which have + not required loading a memory page from disk. + + + + + + (11) cminflt %lu + + + The number of minor faults that the process's waited-for + children have made. + + + + + + (12) majflt %lu + + + The number of major faults the process has made which have + required loading a memory page from disk. + + + + + + (13) cmajflt %lu + + + The number of major faults that the process's waited-for + children have made. + + + + + + (14) utime %lu + + + Amount of time that this process has been scheduled in + user mode, measured in clock ticks (divide by + sysconf(_SC_CLK_TCK)). + + + + + + (15) stime %lu + + + Amount of time that this process has been scheduled in + kernel mode, measured in clock ticks (divide by + sysconf(_SC_CLK_TCK)). + + + + + + (16) cutime %ld + + + Amount of time that this process's waited-for children + have been scheduled in user mode, measured in clock ticks + (divide by sysconf(_SC_CLK_TCK)). + (See also + + times2 + ). + + + + + + (17) cstime %ld + + + Amount of time that this process's waited-for children + have been scheduled in kernel mode, measured in clock + ticks (divide by sysconf(_SC_CLK_TCK)). + + + + + + (18) priority %ld + + + For processes running a real-time scheduling policy + (policy below; see + + sched_setscheduler2 + ), + this is the negated scheduling priority, minus one; that + is, a number in the range -2 to -100, corresponding to + real-time priorities 1 to 99. For processes running + under a non-real-time scheduling policy, this is the raw + nice value + ( + setpriority2 + ) + as represented in the kernel. + The kernel stores nice values as numbers in the range 0 + (high) to 39 (low), corresponding to the user-visible nice + range of -20 to 19. + + + + + + (19) nice %ld + + + The nice value (see + + setpriority2 + ), a value in the range 19 (low priority) + to -20 (high priority). + + + + + + (20) num_threads %ld + + + Number of threads in this process. Currently shown as 0. + + + + + + (21) itrealvalue %ld + + + The time in jiffies before the next + SIGALRM + is sent to the process due to an interval timer. + This field is no longer maintained, and is hard coded as 0. + + + + + + (22) starttime %llu + + + The time the process started after system boot. + The value is expressed in clock ticks (divide by + sysconf(_SC_CLK_TCK)). + + + + + + (23) vsize %lu + + Virtual memory size in bytes. + + + + + (24) rss %ld + + + Resident Set Size: number of pages the process has in real + memory. + This is just the pages which count toward text, data, or + stack space. + This does not include pages which have not been + demand-loaded in, or which are swapped out. + + + + + + (25) rsslim %lu + + + Current soft limit in bytes on the rss of the process; see + the description of RLIMIT_RSS in + + getrlimit2 + . + + + + + + + + + /proc/[pid]/statm + + + Provides information about memory usage, measured in pages. + The columns are: + + + + (1) size + + total program size + (same as VmSize in /proc/[pid]/status) + + + + (2) resident + + resident set size + (same as VmRSS in /proc/[pid]/status) + + + + (3) shared + + number of resident shared pages + (i.e., backed by a file) (same as RssFile+RssShmem in + /proc/[pid]/status) + + + + (4) text + text (code) + + + (5) lib + library + + + (6) data + data + stack + + + (7) dt + dirty pages (always 0) + + + + + + + + + /proc/[pid]/status + + + Provides much of the information in + /proc/[pid]/stat and + /proc/[pid]/statm + in a format that's easier for humans to parse. + Here's an example: + + + $ cat /proc/$$/status + + Name: bash + Umask: 0022 + State: S (sleeping) + Tgid: 17248 + Pid: 17248 + PPid: 17200 + Uid: 1000 1000 1000 1000 + Gid: 100 100 100 100 + VmSize: 131168 kB + VmLck: 0 kB + VmRSS: 13484 kB + VmData: 10332 kB + VmStk: 136 kB + VmExe: 992 kB + VmLib: 2104 kB + SigPnd: 0000000000000000 + SigBlk: 0000000000010000 + SigIgn: 0000000000384004 + + + + + + The fields are as follows: + + + + Name: + Command run by this process. + + + + + + Umask: + Process umask, expressed in octal with a leading zero; see + + umask2 + . + + + + + + State: + Current state of the process. + One of: + + + + R + runnable + + + + O + running + + + + S + sleeping + + + + D + disk sleep + + + + T + stopped or tracing stop + + + + Z + zombie + + + + + + + + + Tgid: + Thread group id (i.e., Process id). + + + + + + Pid: + Thread id (see + + gettid2 + ). + + + + + + PPid: + PID of parent process. + + + + + + Uid, + Gid: + Real, effective, saved set, and filesystem UIDs (GIDs). + + + + + + VmSize: + Virtual memory size. + + + + + + VmLck: + Locked memory size (see + + mlock2 + ). + + + + + + VmRSS: + Resident set size. + + + + + + VmData, + VmStk, + VmExe: + Size of data, stack, and text segments. + + + + + + VmLib: + Shared library code size. + + + + + + SigPnd: + Number of signals pending for process as a whole (see + + pthreads7 + and + + signal7). + + + + + + SigBlk, + SigIgn: + Masks indicating signals being blocked and ignored (see + + signal7 + ). + + + + + + + + + /proc/[pid]/uid + + + This read-only file contains the user id for the process. + + + + + + /proc/[pid]/winexename + + + This read-only file contains the Windows pathname of the + executed command. + + + + + + /proc/[pid]/winpid + + + This read-only file contains the Windows process id for the + process. + + + + + + /proc/cpuinfo + + + This is a collection of CPU and system architecture dependent + items, for each supported architecture a different list. + Two common entries are processor + which gives CPU number and + bogomips, a system constant + that is calculated during kernel initialization. + SMP machines have information for each CPU. + The + + lscpu1 + + command gathers its information from this file. + + + + + + /proc/cygdrive + + + This file is a symbolic link that points to the user's + Windows mapped drive mount point, similar to + root. + + + + + + /proc/devices + + + Text listing of major numbers and device groups. + This can be used by makedev + scripts for consistency with the system. + + + + + + /proc/filesystems + + + A text listing of the filesystems which are supported by Cygwin. + (See also + + filesystems5 + .) + If a filesystem is marked with "nodev", this means that it + does not require a block device to be mounted (e.g., virtual + filesystem, network filesystem). + + + + + + /proc/loadavg + + + The first three fields in this file are load average figures + giving the number of jobs in the run queue (state R) + averaged over 1, 5, and 15 minutes. + They are the same as the load average numbers given by + + uptime1 + and other programs. + The fourth field consists of two numbers separated by a slash (/). + The first of these is the number of currently runnable + scheduling entities (processes, threads). + The value after the slash is the number of scheduling entities + that currently exist on the system. + + + + + + /proc/meminfo + + + This file reports statistics about memory usage on the system. + It is used by + + free1 + + to report the amount of free and used memory (both physical + and swap) on the system as well as the shared memory and + buffers used by the system. + Each line of the file consists of a parameter name, followed by + a colon, the value of the parameter, and an option unit of + measurement (e.g., "kB"). + The list below describes the parameter names and the format + specifier required to read the field value. + Some fields are displayed only if the system was configured + with various options; those dependencies are noted in the + list. + + + + + MemTotal %lu + + + Total usable RAM (i.e., physical RAM minus a few reserved + bits and the system binary code). + + + + + + MemFree %lu + + + The sum of LowFree + + HighFree. + + + + + + HighTotal %lu + + Total amount of highmem. + + + + + HighFree %lu + + Amount of free highmem. + + + + + LowTotal %lu + + + Total amount of lowmem. + Lowmem is memory which can be used for everything that + highmem can be used for, but it is also available for the + system's use for its own data structures. + Bad things happen when you're out of lowmem. + + + + + + LowFree %lu + + Amount of free lowmem. + + + + + SwapTotal %lu + + Total amount of swap space available. + + + + + SwapFree %lu + + Amount of swap space that is currently unused. + + + + + + + + /proc/misc + + + Text listing of minor device numbers and names of devices with + major device number of the misc device group. + This can be used by makedev scripts + for consistency with the system. + + + + + + /proc/mounts + + + With the introduction of per-process mount namespaces, this file + became a link to + /proc/self/mounts, + which lists the mount points of the process's own mount + namespace. + The format of this file is documented in + + fstab5 + . + + + + + /proc/net + + + This directory contains various files and subdirectories + containing information about the networking layer. + The files contain ASCII structures and are, therefore, readable + with + + cat1 + . + However, the standard + + netstat8 + + suite provides much cleaner access to these files. + + + + + /proc/net/if_inet6 + + + This file contains information about IP V6 interface adapters, + if used. + Each line represents an IP V6 interface adapter. + + + + +fe800000000000002c393d3da6108636 12 40 20 80 {C6B5FBE5-A3AC-4DB0-A308-8EE94E1406A4} +fe8000000000000039da016f76bd92bc 13 40 20 20 {E06B8972-0918-41FC-851B-090C446C7D1C} +fe8000000000000050ba9cedf1fe1628 0b 40 20 20 {680ED6FD-DFAC-4398-AA85-FB33E17E38EA} +fe8000000000000030c5c6a0b30f109d 11 40 20 20 {B9E39F53-1659-4065-BDA5-F41162250E03} +20021840ac2c12343427e3b9ec6fa585 08 40 00 80 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c12342403e3b2c7a5a32f 08 80 00 20 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c1234284e8d0ecb4160cb 08 80 00 20 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c123468cb06ea72f1d678 08 80 00 80 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c12346cb59aca97c36e3b 08 80 00 20 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c123498af9881de1fb828 08 80 00 20 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c1234cd62a3d73a498611 08 80 00 20 {4083A7F8-99CF-4220-8715-6FDF268B002F} +20021840ac2c1234e410c873be09df93 08 80 00 20 {4083A7F8-99CF-4220-8715-6FDF268B002F} +fe800000000000003427e3b9ec6fa585 08 40 20 80 {4083A7F8-99CF-4220-8715-6FDF268B002F} +00000000000000000000000000000001 01 80 10 80 {2B5345AC-7502-11EA-AC73-806E6F6E6963} + (1) (2)(3)(4)(5) (6) + + + + The fields in each line are: + + + + (1) + + The IP V6 address of the interface adapter. + + + + + (2) + + The IP V6 interface adapter index. + + + + + (3) + + + The prefix length of the IP V6 interface address. + + + + + + (4) + + The scope of the IP V6 interface address. + + + + + (5) + + The state of the IP V6 interface address. + + + + + (6) + + + The DUID/GUID/UUID of the IP V6 interface adapter. + + + + + + + The last number exists only for compatibility reasons and is + always 1. + + + + + + + + /proc/partitions + + + Contains the major and minor numbers of each partition as well + as the number of 1024-byte blocks and the partition name. + + + + + + /proc/registry + + + Under Cygwin, this directory contains subdirectories for + registry paths, keys, and subkeys, and files named for registry + values which contain registry data, for the current process. + + + + + + /proc/registry32 + + + Under 64 bit Windows, this directory contains subdirectories for + registry paths, keys, and subkeys, and files named for registry + values which contain registry data, for 32 bit processes. + + + + + + /proc/registry64 + + + Under 64 bit Windows, this directory contains subdirectories for + registry paths, keys, and subkeys, and files named for registry + values which contain registry data, for 64 bit processes. + + + + + + /proc/self + + + This directory refers to the process accessing the + /proc filesystem, and is identical to the + /proc directory named by the process id + of the same process. + + + + + + /proc/stat + + + system statistics. + Varies with architecture. + Common entries include: + + + cpu 10132153 0 3084719 46828483 + + + + + cpu0 1393280 0 572056 13343292 + + + The amount of time, measured in units of USER_HZ + (1/100ths of a second on most architectures, use + sysconf(_SC_CLK_TCK) + to obtain the right value), that the system ("cpu" + line) or the specific CPU + ("cpu N" line) + spent in various states: + + + + (1) user + + Time spent in user mode. + + + + + (2) nice + + + Time spent in user mode with low priority + (nice). + + + + + + (3) system + + Time spent in system mode. + + + + + (4) idle + + Time spent in the idle task. + + + + + + + + + + page 5741 1808 + + + The number of pages the system paged in and the number + that were paged out (from disk). + + + + + + swap 1 0 + + + The number of swap pages that have been brought in and + out. + + + + + + intr 1462898 + + The number of interrupts serviced. + + + + + ctxt 115315 + + + The number of context switches that the system + underwent. + + + + + + btime 769041601 + + + boot time, in seconds since the Epoch, + 1970-01-01 00:00:00 +0000 (UTC). + + + + + + + + + + + /proc/swaps + + + Swap areas in use. + See also + + swapon8 + . + + + + + + /proc/sys + + + This directory contains a number of files and subdirectories + linking to Windows objects, which can be read using these + entries. + + + + String values may be terminated by either '\0' + or '\n'. + + + + Integer and long values may be either in decimal or in + hexadecimal notation (e.g. 0x3FFF). + Multiple integer or long values may be separated by any of the + following whitespace characters: + ' ', '\t', or + '\n'. + + + + + + /proc/sysvipc + + + Subdirectory containing the pseudo-files + msg, semand + shm. + These files list the System V Interprocess Communication (IPC) + objects (respectively: message queues, semaphores, and shared + memory) that currently exist on the system, providing similar + information to that available via + + ipcs1 + . + These files are only available if the cygserver Cygwin service + is running. + These files have headers and are formatted (one IPC object per + line) for easy understanding. + + svipc7 + + provides further background on the information shown by these + files. + + + + + + /proc/uptime + + + This file contains two numbers (values in seconds): the uptime + of the system (including time spent in suspend) and the amount + of time spent in the idle process. + + + + + + /proc/version + + + This string identifies the Cygwin version that is currently + running. + For example: + + + +CYGWIN_NT-10.0-18363 version 3.1.7-340.x86_64 (corinna@calimero) (gcc version 9.3.0 20200312 (Fedora Cygwin 9.3.0-1) (GCC) ) 2020-08-22 17:48 UTC + + + + + + + + + + + Notes + + Many files contain strings (e.g., the environment and command + line) that are in the internal format, with subfields terminated + by null bytes ('\0'). + When inspecting such files, you may find that the results are + more readable if you use a command of the following form to + display them: + + + $ cat -A file + + + + + This manual page is incomplete, possibly inaccurate, and is the kind + of thing that needs to be updated very often. + + + + See Also + + + cat1 + , + + find1 + , + + free1 + , + + ps1 + , + + pstree1 + , + + tr1 + , + + uptime1 + , + + chroot2 + , + + mmap2 + , + + readlink2 + , + + syslog2 + , + + hier7 + , + + arp8 + , + + mount8 + , + + netstat8 + , + + route8 + . + + + The /proc/registry filesystem -- 2.43.5