Joseph Myers [Wed, 13 Jun 2018 16:06:14 +0000 (16:06 +0000)]
Fix strtod overflow detection (bug 23279).
As shown by bug 23279, strtod's round_and_return has an off-by-one
error in its overflow detection, only counting an exponent greater
than MAX_EXP as overflowing when an exponent of MAX_EXP also means
overflow (recall the ISO C definition of DBL_MAX_EXP etc. is based on
a floating-point model where 2^exp is multiplied by a value in the
interval [0.5, 1), so 2^MAX_EXP is not representable).
For decimal arguments to strtod, a separate overflow check in the main
implementation covers the case where the integer part of the argument
(truncated to the nearest integer towards zero) has more than MAX_EXP
bits, meaning that this issue in round_and_return only affects cases
(arguments with absolute value strictly between the maximum
representable value and 2^MAX_EXP) where overflow depends on the
rounding mode; in such cases, the returned value would still have been
correct on overflow but without the overflow exception being raised or
errno being set to ERANGE. For hex float arguments, however, other
cases can arise, as shown in bug 23279, where a value with exponent
already set to MAX_EXP is passed into round_and_return and a result
can wrongly end up being NaN, or infinity instead of the largest
finite value.
This patch fixes the off-by-one error, adds testing of overflow
exceptions to the tst-strtod-round framework, and adds tests of these
issues.
Tested for x86_64. Also ran the tst-strtod-round tests for powerpc to
make sure the new tests didn't introduce any new failures for IBM long
double.
[BZ #23279]
* stdlib/strtod_l.c (round_and_return): Handle an exponent of
MAX_EXP as overflowing.
* stdlib/gen-tst-strtod-round.c (string_to_fp): Clear MPFR
overflow flag.
(round_str): Output also whether result overflows in each rounding
mode.
* stdlib/tst-strtod-round-data: Add more tests.
* stdlib/tst-strtod-round-data.h: Regenerated.
* stdlib/tst-strtod-round-skeleton.c (_XNTRY): Update comment.
(TEST): Handle extra arguments for overflow flags.
(struct test_overflow): New type.
[!FE_OVERFLOW] (FE_OVERFLOW): Define to 0.
(GEN_ONE_TEST): Clear all exceptions. Test overflow flag.
(test_in_one_mode): Take argument with overflow information.
(do_test): Update calls to test_in_one_mode.
Carlos O'Donell [Wed, 13 Jun 2018 03:31:02 +0000 (23:31 -0400)]
Fix comments in _dl_dst_count and _dl_dst_substitute.
The comments in _dl_dst_count is adjusted to match what the code does
which is count DSTs from the start of the string. With the removal of
DL_DST_COUNT we no longer accept an input that starts at the first $.
In _dl_dst_substitute we adjust the comment to indicate that both
conditions must be true for the SUID/SGID $ORIGIN exception.
Carlos O'Donell [Tue, 12 Jun 2018 20:17:05 +0000 (16:17 -0400)]
Fix fallback path in __pthread_mutex_timedlock ().
Fix the typo in the fallback path in __pthread_mutex_timedlock ()
whic hcalls lll_futex_timed_wait (). This is only useful for cases
where the patch is being backported to older distributions where
only lll_futex_timed_wait () is available.
Joseph Myers [Tue, 12 Jun 2018 16:57:26 +0000 (16:57 +0000)]
Do not use const attribute for nan functions (bug 23277).
As in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86113 for
__builtin_nan, bits/mathcalls.h wrongly declares the nan function with
the __const__ attribute. Because the function reads memory pointed to
by an argument, it's only pure, not const. This patch removes the
incorrect attribute and adds a testcase for the bug. No __pure__
attribute is added to replace the incorrect __const__ one, since that
would introduce problems when using GCC versions that have the
incorrect built-in __const__ attribute and warn for the combination of
those two attributes.
Tested for x86_64.
[BZ #23277]
* math/bits/mathcalls.h [__USE_ISOC99] (nan): Do not use __const__
attribute.
* math/test-nan-const.c: New file.
* math/Makefile (tests): Add test-nan-const.
(CFLAGS-test-nan-const.c): New variable.
H.J. Lu [Tue, 12 Jun 2018 16:10:28 +0000 (09:10 -0700)]
benchtests: Add -f/--functions argument
On x86-64, there may be multiple IFUNC implementations for a given
function. But we may be only interested in a subset of them. This
patch adds -f/--functions argument to compare a subset of IFUNC
implementations.
* benchtests/scripts/compare_strings.py (process_results): Add
funcs argument. Compare only functions which are selected.
(main): Check if base function is among selected functions.
Pass selected functions to process_results.
(__main__): Add -f/--functions argument.
Phecda is HXT semiconductor's CPU core, this patch adds memory operation
ifuncs for it: sharing the same optimized implementation with Qualcomm's
Falkor core.
2018-06-07 Minfeng Kang <minfeng.kang@hxt-semitech.com>
Hongbo Zhang <hongbo.zhang@linaro.org>
* sysdeps/aarch64/multiarch/memcpy.c (libc_ifunc): reuse
__memcpy_falkor for phecda core.
* sysdeps/aarch64/multiarch/memmove.c (libc_ifunc): reuse
__memmove_falkor for phecda core.
* sysdeps/aarch64/multiarch/memset.c (libc_ifunc): reuse
__memset_falkor for phecda core.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c: add MIDR entry
for phecda core.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.h (IS_PHECDA): add
macro to identify phecda core.
This commit improves DST handling significantly in the following
ways: firstly is_dst () is overhauled to correctly process DST
sequences that would be accepted given the ELF gABI. This means that
we actually now accept slightly more sequences than before. Now we
accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or
$ORIGIN/..., but this kind of behaviour results in unexpected
and uninterpreted DST sequences being used as literal search paths
leading to security defects. Therefore the first step in correcting
this defect is making is_dst () properly account for all DSTs
and making the function context free in the sense that it counts
DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count ()
is also simplified to count all DSTs regardless of context.
Then in _dl_dst_substitute () we reintroduce context-dependent
processing for such things as AT_SECURE handling. At the level of
_dl_dst_substitute we can have access to things like the true start
of the string sequence to validate $ORIGIN-based paths rooted in
trusted directories. Lastly, we tighten up the accepted sequences
in AT_SECURE, and avoid leaving known unexpanded DSTs, this is
noted in the NEWS entry.
Verified with a sequence of 68 tests on x86_64 that cover
non-AT_SECURE and AT_SECURE testing using a sysroot (requires root
to run). The tests cover cases for bug 23102, bug 21942, bug 18018,
and bug 23259. These tests are not yet appropriate for the glibc
regression testsuite, but with the upcoming test-in-container testing
framework it should be possible to include these tests upstream soon.
See the mailing list for the tests:
https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
Neither the <dlfcn.h> entry points, nor lazy symbol resolution, nor
initial shared library load-up, are cancellation points, so ld.so
should exclusively use I/O primitives that are not cancellable. We
currently achieve this by having the cancellation hooks compile as
no-ops when IS_IN(rtld); this patch changes to using exclusively
_nocancel primitives in the source code instead, which makes the
intent clearer and significantly reduces the amount of code compiled
under IS_IN(rtld) as well as IS_IN(libc) -- in particular,
elf/Makefile no longer thinks we require a copy of unwind.c in
rtld-libc.a. (The older mechanism is preserved as a backstop.)
The bulk of the change is splitting up the files that define the
_nocancel I/O functions, so they don't also define the variants that
*are* cancellation points; after which, the existing logic for picking
out the bits of libc that need to be recompiled as part of ld.so Just
Works. I did this for all of the _nocancel functions, not just the
ones used by ld.so, for consistency.
fcntl was a little tricky because it's only a cancellation point for
certain opcodes (F_SETLKW(64), which can block), and the existing
__fcntl_nocancel wasn't applying the FCNTL_ADJUST_CMD hook, which
strikes me as asking for trouble, especially as the only nontrivial
definition of FCNTL_ADJUST_CMD (for powerpc64) changes F_*LK* opcodes.
To fix this, fcntl_common moves to fcntl_nocancel.c along with
__fcntl_nocancel, and changes its name to the extern (but hidden)
symbol __fcntl_nocancel_adjusted, so that regular fcntl can continue
calling it. __fcntl_nocancel now applies FCNTL_ADJUST_CMD; so that
both both fcntl.c and fcntl_nocancel.c can see it, the only nontrivial
definition moves from sysdeps/u/s/l/powerpc/powerpc64/fcntl.c to
.../powerpc64/sysdep.h and becomes entirely a macro, instead of a macro
that calls an inline function.
The nptl version of libpthread also changes a little, because its
"compat-routines" formerly included files that defined all the
_nocancel functions it uses; instead of continuing to duplicate them,
I exported the relevant ones from libc.so as GLIBC_PRIVATE. Since the
Linux fcntl.c calls a function defined by fcntl_nocancel.c, it can no
longer be used from libpthread.so; instead, introduce a custom
forwarder, pt-fcntl.c, and export __libc_fcntl from libc.so as
GLIBC_PRIVATE. The nios2-linux ABI doesn't include a copy of vfork()
in libpthread, and it was handling that by manipulating
libpthread-routines in .../linux/nios2/Makefile; it is cleaner to do
what other such ports do, and have a pt-vfork.S that defines no symbols.
Right now, it appears that Hurd does not implement _nocancel I/O, so
sysdeps/generic/not-cancel.h will forward everything back to the
regular functions. This changed the names of some of the functions
that sysdeps/mach/hurd/dl-sysdep.c needs to interpose.
* elf/dl-load.c, elf/dl-misc.c, elf/dl-profile.c, elf/rtld.c
* sysdeps/unix/sysv/linux/dl-sysdep.c
Include not-cancel.h. Use __close_nocancel instead of __close,
__open64_nocancel instead of __open, __read_nocancel instead of
__libc_read, and __write_nocancel instead of __libc_write.
* csu/check_fds.c (check_one_fd)
* sysdeps/posix/fdopendir.c (__fdopendir)
* sysdeps/posix/opendir.c (__alloc_dir): Use __fcntl_nocancel
instead of __fcntl and/or __libc_fcntl.
* sysdeps/unix/sysv/linux/pthread_setname.c (pthread_setname_np)
* sysdeps/unix/sysv/linux/pthread_getname.c (pthread_getname_np)
* sysdeps/unix/sysv/linux/i386/smp.h (is_smp_system):
Use __open64_nocancel instead of __open_nocancel.
* sysdeps/unix/sysv/linux/not-cancel.h: Move all of the
hidden_proto declarations to the end and issue them if either
IS_IN(libc) or IS_IN(rtld).
* sysdeps/unix/sysv/linux/Makefile [subdir=io] (sysdep_routines):
Add close_nocancel, fcntl_nocancel, nanosleep_nocancel,
open_nocancel, open64_nocancel, openat_nocancel, pause_nocancel,
read_nocancel, waitpid_nocancel, write_nocancel.
H.J. Lu [Tue, 12 Jun 2018 13:23:28 +0000 (06:23 -0700)]
i386: Change offset of __private_ss to 0x30 [BZ #23250]
sysdeps/i386/nptl/tls.h has
typedef struct
{
void *tcb; /* Pointer to the TCB. Not necessarily the
thread descriptor used by libpthread. */
dtv_t *dtv;
void *self; /* Pointer to the thread descriptor. */
int multiple_threads;
uintptr_t sysinfo;
uintptr_t stack_guard;
uintptr_t pointer_guard;
int gscope_flag;
int __glibc_reserved1;
/* Reservation of some values for the TM ABI. */
void *__private_tm[4];
/* GCC split stack support. */
void *__private_ss;
} tcbhead_t;
The offset of __private_ss is 0x34. But GCC defines
/* We steal the last transactional memory word. */
#define TARGET_THREAD_SPLIT_STACK_OFFSET 0x30
and libgcc/config/i386/morestack.S has
cmpl %gs:0x30,%eax # See if we have enough space.
movl %eax,%gs:0x30 # Save the new stack boundary.
movl %eax,%gs:0x30 # Save the new stack boundary.
movl %ecx,%gs:0x30 # Save new stack boundary.
movl %eax,%gs:0x30
movl %gs:0x30,%eax
movl %eax,%gs:0x30
Since update TARGET_THREAD_SPLIT_STACK_OFFSET changes split stack ABI,
this patch updates tcbhead_t to match GCC.
[BZ #23250]
[BZ #10686]
* sysdeps/i386/nptl/tls.h (tcbhead_t): Change __private_tm[4]
to _private_tm[3] and add __glibc_reserved2.
Add _Static_assert of offset of __private_ss == 0x30.
* sysdeps/x86_64/nptl/tls.h: Add _Static_assert of offset of
__private_ss == 0x40 for ILP32 and == 0x70 for LP64.
Florian Weimer [Tue, 12 Jun 2018 13:00:33 +0000 (15:00 +0200)]
x86: Make strncmp usable from rtld
Due to the way the conditions were written, the rtld build of strncmp
ended up with no definition of the strncmp symbol at all: The
implementations were renamed for use within an IFUNC resolver, but the
IFUNC resolver itself was missing (because rtld does not use IFUNCs).
Rafal Luzynski [Tue, 30 Jan 2018 11:31:12 +0000 (12:31 +0100)]
gd_GB, hsb_DE, wa_BE: Add alternative month names (bug 23140).
As a followup of fixing bug 10871, these three languages now support two
grammatical cases of the month names.
This commit does not resolve the bug because there are more languages
to be committed.
[BZ #23140]
* localedata/locales/gd_GB (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
* localedata/locales/hsb_DE (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
* localedata/locales/wa_BE (mon): Rename to...
(alt_mon): This.
(mon): Add, fill with the proper genitive forms, but CLDR data
is incomplete; completed according to the comments in this file.
(d_t_fmt): Do not use "di" before the month name, no longer needed.
Joseph Myers [Mon, 11 Jun 2018 16:33:42 +0000 (16:33 +0000)]
Fix ldbl-96 fma (Inf, Inf, finite) (bug 23272).
As reported in bug 23272, the ldbl-96 implementation of fma (fma for
double, in terms of ldbl-96 as the internal arithmetic type, as used
on 32-bit x86) is missing some of the special-case handling for
non-finite arguments, resulting in incorrect NaN results when the
first two arguments are infinities, the third is finite and so the
infinities go through the logic for finite arguments. This patch
fixes it by handling all cases of non-finite arguments up front, with
additional fma tests for the problem cases being added to the
testsuite.
Tested for x86_64 and x86.
[BZ #23272]
* sysdeps/ieee754/ldbl-96/s_fma.c (__fma): Start by handling all
cases of non-finite arguments.
* math/libm-test-fma.inc (fma_test_data): Add more tests.
The hppa-linux target still requires an executable stack for kernel
syscall restarts and signal returns. Thus, we need to xfail the
check-execstack test.
posix: Fix posix_spawnp to not execute invalid binaries in non compat mode (BZ#23264)
Current posix_spawnp implementation wrongly tries to execute invalid
binaries (for instance script without shebang) as a shell script in
non compat mode. It was a regression introduced by 9ff72da471a509a8c19791efe469f47fa6977410 when __spawni started to use
__execvpe instead of __execve (glibc __execvpe try to execute ENOEXEC
as shell script regardless).
This patch fixes it by using an internal symbol (__execvpex) with the
faulty semantic (since compat mode is handled by spawni.c itself).
It was reported by Daniel Drake on libc-help [1].
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #23264]
* include/unistd.h (__execvpex): New prototype.
* posix/Makefile (tests): Add tst-spawn4.
(tests-internal): Add tst-spawn4-compat.
* posix/execvpe.c (__execvpe_common, __execvpex): New functions.
* posix/tst-spawn4-compat.c: New file.
* posix/tst-spawn4.c: Likewise.
* sysdeps/unix/sysv/linux/spawni.c (__spawni): Do not interpret invalid
binaries as shell scripts.
* sysdeps/posix/spawni.c (__spawni): Likewise.
H.J. Lu [Fri, 8 Jun 2018 17:28:38 +0000 (10:28 -0700)]
Mark _init and _fini as hidden [BZ #23145]
_init and _fini are special functions provided by glibc for linker to
define DT_INIT and DT_FINI in executable and shared library. They
should never be put in dynamic symbol table. This patch marks them as
hidden to remove them from dynamic symbol table.
Tested with build-many-glibcs.py.
[BZ #23145]
* elf/Makefile (tests-special): Add $(objpfx)check-initfini.out.
($(all-built-dso:=.dynsym): New target.
(common-generated): Add $(all-built-dso:$(common-objpfx)%=%.dynsym).
($(objpfx)check-initfini.out): New target.
(generated): Add check-initfini.out.
* scripts/check-initfini.awk: New file.
* sysdeps/aarch64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/alpha/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/arm/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/hppa/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/i386/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/ia64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/m68k/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/microblaze/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/mips/mips64/n64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/nios2/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/powerpc/powerpc64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-32/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/s390/s390-64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sh/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/sparc/crti.S (_init): Mark as hidden.
(_fini): Likewise.
* sysdeps/x86_64/crti.S (_init): Mark as hidden.
(_fini): Likewise.
powerpc64le: Fix TFtype in sqrtf128 when using -mabi=ieeelongdouble
When building with -mlong-double-128 or -mabi=ibmlongdouble, TFtype
represents the IBM 128-bit extended floating point type, while KFtype
represents the IEEE 128-bit floating point type.
The soft float implementation of e_sqrtf128 had to redefine TFtype and
TF in order to workaround this issue. However, this behavior changes
when -mabi=ieeelongdouble is used and the macros are not necessary.
* sysdeps/powerpc/powerpc64/le/fpu/e_sqrtf128.c
[__HAVE_FLOAT128_UNLIKE_LDBL] (TFtype, TF): Restrict TFtype
and TF redirection to KFtype and KF only when the default
long double type is not the IEEE 128-bit floating point type.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Joseph Myers [Tue, 5 Jun 2018 11:04:46 +0000 (11:04 +0000)]
Add MAP_FIXED_NOREPLACE from Linux 4.17 to bits/mman.h.
Linux 4.17 adds MAP_FIXED_NOREPLACE (value 0x100000 on most
architectures, 0x200000 on alpha). This patch adds that macro to
glibc's bits/mman.h headers.
Joseph Myers [Tue, 5 Jun 2018 11:03:22 +0000 (11:03 +0000)]
Update kernel version in syscall-names.list to 4.17.
As far as I can tell, Linux 4.17 does not add any new syscalls; this
patch updates the version number in syscall-names.list to reflect that
it's still current for 4.17.
Tested for x86_64-linux-gnu with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.17.
Catch runtime exceptions in case the user provided: wrong base
function, attribute(s) or input file. In any of the latter, quit
immediately with non-zero return code.
* benchtests/scripts/compare_string.py: (process_results) Catch
exception in non-existent base_func and catch exception in
non-existent attribute.
(parse_file) Catch exception in non-existent input file.
Having a string comparison report with neither diff numbers nor header
yields a more useful output to be consumed by other tools.
* benchtests/scripts/compare_string.py: Add --no-diff and --no-header
options to avoid diff calculation and omit header, respectively.
(main): process --no-diff and --no-header
x86-64: Optimize strcmp/wcscmp and strncmp/wcsncmp with AVX2
Optimize x86-64 strcmp/wcscmp and strncmp/wcsncmp with AVX2. It uses vector
comparison as much as possible. Peak performance observed on a SkyLake
machine: 9x, 3x, 2.5x and 5.5x for strcmp, strncmp, wcscmp and wcsncmp,
respectively. The larger the comparison length, the more benefit using
avx2 functions, except on the strcmp, where peak is observed at length
== 32 bytes. Select AVX2 strcmp/wcscmp on AVX2 machines where vzeroupper
is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcmp-avx2, strncmp-avx2, wcscmp-avx2, wcscmp-sse2, wcsncmp-avx2 and
wcsncmp-sse2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strcmp_avx2,
__strncmp_avx2, __wcscmp_avx2, __wcsncmp_avx2, __wcscmp_sse2
and __wcsncmp_sse2.
* sysdeps/x86_64/multiarch/strcmp.c (OPTIMIZE (avx2)):
(IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX 2 machines if
AVX unaligned load is fast and vzeroupper is preferred.
* sysdeps/x86_64/multiarch/strncmp.c: Likewise.
* sysdeps/x86_64/multiarch/strcmp-avx2.S: New file.
* sysdeps/x86_64/multiarch/strncmp-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcscmp-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcscmp-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcscmp.c: Likewise.
* sysdeps/x86_64/multiarch/wcsncmp-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsncmp-sse2.c: Likewise.
* sysdeps/x86_64/multiarch/wcsncmp.c: Likewise.
* sysdeps/x86_64/wcscmp.S (__wcscmp): Add alias only if __wcscmp
is undefined.
The results are from configuring with --disable-multi-arch, building
with “-march=x86-64 -mtune=generic -mfpmath=sse” and running the
testsuite on a Haswell-era CPU.
Joseph Myers [Fri, 1 Jun 2018 17:25:12 +0000 (17:25 +0000)]
Make powerpc-nofpu __sqrtsf2, __sqrtdf2 compat symbols (bug 18473).
powerpc-nofpu libc exports __sqrtsf2 and __sqrtdf2 symbols. The
export of these soft-fp symbols is a mistake; they aren't part of the
libgcc interface and GCC will never generate code that calls them.
This patch makes them into compat symbols (no code built for static
libc), moving their sources from the generic soft-fp sources to
sysdeps/powerpc/nofpu (the underlying soft-fp FP_SQRT functionality
remains of use to implement actual sqrt public interfaces, such as
sqrtl / sqrtf128 for which it is used on various platforms, but
__sqrt[sdt]f2 are not such interfaces).
Tested with build-many-glibcs.py for relevant platforms.
[BZ #18473]
* soft-fp/sqrttf2.c: Remove file.
* soft-fp/sqrtdf2.c: Move to ....
* sysdeps/powerpc/nofpu/sqrtdf2.c: ... here. Include
<shlib-compat.h>.
(__sqrtdf2): Make conditional on
[SHLIB_COMPAT (libc, GLIBC_2_3_2, GLIBC_2_28)]. Define as compat
symbol.
* soft-fp/sqrtsf2.c: Move to ....
* sysdeps/powerpc/nofpu/sqrtsf2.c: ... here. Include
<shlib-compat.h>.
(__sqrtsf2): Make conditional on
[SHLIB_COMPAT (libc, GLIBC_2_3_2, GLIBC_2_28)]. Define as compat
symbol.
* soft-fp/Makefile (gcc-single-routines): Remove sqrtsf2.
(gcc-double-routines): Remove sqrtdf2.
(gcc-quad-routines): Remove sqrttf2.
* sysdeps/nios2/Makefile [$(subdir) = soft-fp] (sysdep_routines):
Do not filter out sqrtsf2 and sqrtdf2.
* sysdeps/powerpc/nofpu/Makefile [$(subdir) = soft-fp]
(sysdep_routines): Add sqrtsf2 and sqrtdf2.
Florian Weimer [Fri, 1 Jun 2018 08:41:03 +0000 (10:41 +0200)]
libio: Avoid _allocate_buffer, _free_buffer function pointers [BZ #23236]
These unmangled function pointers reside on the heap and could
be targeted by exploit writers, effectively bypassing libio vtable
validation. Instead, we ignore these pointers and always call
malloc or free.
In theory, this is a backwards-incompatible change, but using the
global heap instead of the user-supplied callback functions should
have little application impact. (The old libstdc++ implementation
exposed this functionality via a public, undocumented constructor
in its strstreambuf class.)
This patch creates ifunc for sqrtf128() to make use of new xssqrtqp
instruction for POWER9 when --enable-multi-arch and --with-cpu=power8
options are used on power9 system. This is achieved by explicitly
adding -mcpu=power9 flag for sqrtf128-power9.
Joseph Myers [Fri, 25 May 2018 20:00:51 +0000 (20:00 +0000)]
Remove sysdeps/sparc/sparc64/soft-fp directory.
As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>,
there should not be separate sysdeps/<arch>/soft-fp directories when
those are used by all configurations that use sysdeps/<arch>, and,
more generally, should not be sysdeps/foo/Implies files pointing to a
subdirectory foo/bar. This patch eliminates the
sysdeps/sparc/sparc64/soft-fp directory accordingly, merging its
contents into sysdeps/sparc/sparc64. This completes removing the
unnecessary <arch>/soft-fp sysdeps directories.
sysdeps/sparc/sparc64/soft-fp/e_ilogbl.c is removed rather than moved.
It was not in fact used previously - the ldbl-128 version of
e_ilogbl.c was used instead - and moving it into sysdeps/sparc/sparc64
results in it being used, but causing a build failure because of
FP_DECL_EX declaring an unused variable (as I noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00457.html> that file
doesn't appear to use FP_DECL_EX). Given that the file was previously
unused and so presumably not tested recently, removing it is the safe
way to avoid this patch changing what actually gets built into glibc
(if this file should turn out more efficient than the ldbl-128
e_ilogbl.c, it can always be added back in future with the build
failure fixed).
Tested with build-many-glibcs.py that installed stripped shared
libraries for sparc configurations are unchanged by this patch.
* sysdeps/sparc/sparc64/Implies: Remove sparc/sparc64/soft-fp.
* sysdeps/sparc/sparc64/Makefile [$(subdir) = soft-fp]
(sparc64-quad-routines): New variable. Moved from ....
[$(subdir) = soft-fp] (sysdep_routines): Add
$(sparc64-quad-routines). Moved from ....
[$(subdir) = math] (CPPFLAGS): Add -I../soft-fp/. Moved from ....
* sysdeps/sparc/sparc64/soft-fp/Makefile: ... here. Remove file.
* sysdeps/sparc/sparc64/Versions (libc): Add GLIBC_2.2 symbols
moved from ....
* sysdeps/sparc/sparc64/soft-fp/Versions: ... here. Remove file.
* sysdeps/sparc/sparc64/soft-fp/e_ilogbl.c: Remove file.
* sysdeps/sparc/sparc64/soft-fp/qp_add.c: Move to ....
* sysdeps/sparc/sparc64/qp_add.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_cmp.c: Move to ....
* sysdeps/sparc/sparc64/qp_cmp.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_cmpe.c: Move to ....
* sysdeps/sparc/sparc64/qp_cmpe.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_div.c: Move to ....
* sysdeps/sparc/sparc64/qp_div.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_dtoq.c: Move to ....
* sysdeps/sparc/sparc64/qp_dtoq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_feq.c: Move to ....
* sysdeps/sparc/sparc64/qp_feq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_fge.c: Move to ....
* sysdeps/sparc/sparc64/qp_fge.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_fgt.c: Move to ....
* sysdeps/sparc/sparc64/qp_fgt.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_fle.c: Move to ....
* sysdeps/sparc/sparc64/qp_fle.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_flt.c: Move to ....
* sysdeps/sparc/sparc64/qp_flt.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_fne.c: Move to ....
* sysdeps/sparc/sparc64/qp_fne.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_itoq.c: Move to ....
* sysdeps/sparc/sparc64/qp_itoq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_mul.c: Move to ....
* sysdeps/sparc/sparc64/qp_mul.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_neg.S: Move to ....
* sysdeps/sparc/sparc64/qp_neg.S: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_qtod.c: Move to ....
* sysdeps/sparc/sparc64/qp_qtod.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_qtoi.c: Move to ....
* sysdeps/sparc/sparc64/qp_qtoi.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_qtos.c: Move to ....
* sysdeps/sparc/sparc64/qp_qtos.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_qtoui.c: Move to ....
* sysdeps/sparc/sparc64/qp_qtoui.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_qtoux.c: Move to ....
* sysdeps/sparc/sparc64/qp_qtoux.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_qtox.c: Move to ....
* sysdeps/sparc/sparc64/qp_qtox.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_sqrt.c: Move to ....
* sysdeps/sparc/sparc64/qp_sqrt.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_stoq.c: Move to ....
* sysdeps/sparc/sparc64/qp_stoq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_sub.c: Move to ....
* sysdeps/sparc/sparc64/qp_sub.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_uitoq.c: Move to ....
* sysdeps/sparc/sparc64/qp_uitoq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_util.c: Move to ....
* sysdeps/sparc/sparc64/qp_util.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_uxtoq.c: Move to ....
* sysdeps/sparc/sparc64/qp_uxtoq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/qp_xtoq.c: Move to ....
* sysdeps/sparc/sparc64/qp_xtoq.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Move to ....
* sysdeps/sparc/sparc64/sfp-machine.h: ... here.
Joseph Myers [Fri, 25 May 2018 16:51:15 +0000 (16:51 +0000)]
Remove sysdeps/sparc/sparc32/soft-fp directory.
As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>,
there should not be separate sysdeps/<arch>/soft-fp directories when
those are used by all configurations that use sysdeps/<arch>, and,
more generally, should not be sysdeps/foo/Implies files pointing to a
subdirectory foo/bar. This patch eliminates the
sysdeps/sparc/sparc32/soft-fp directory accordingly, merging its
contents into sysdeps/sparc/sparc32.
Tested with build-many-glibcs.py that installed stripped shared
libraries for sparc configurations are unchanged by this patch.
* sysdeps/sparc/sparc32/Implies: Remove sparc/sparc32/soft-fp.
* sysdeps/sparc/sparc32/Makefile [$(subdir) = soft-fp]
(sparc32-quad-routines): New variable. Moved from ....
[$(subdir) = soft-fp] (sysdep_routines): Add
$(sparc32-quad-routines). Moved from ....
* sysdeps/sparc/sparc32/soft-fp/Makefile: ... here. Remove file.
* sysdeps/sparc/sparc32/Versions (libc): Add GLIBC_2.4 symbols
moved from ....
* sysdeps/sparc/sparc32/soft-fp/Versions: ... here. Remove file.
* sysdeps/sparc/sparc32/soft-fp/q_add.c: Move to ....
* sysdeps/sparc/sparc32/q_add.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_cmp.c: Move to ....
* sysdeps/sparc/sparc32/q_cmp.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_cmpe.c: Move to ....
* sysdeps/sparc/sparc32/q_cmpe.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_div.c: Move to ....
* sysdeps/sparc/sparc32/q_div.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_dtoq.c: Move to ....
* sysdeps/sparc/sparc32/q_dtoq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_feq.c: Move to ....
* sysdeps/sparc/sparc32/q_feq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_fge.c: Move to ....
* sysdeps/sparc/sparc32/q_fge.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_fgt.c: Move to ....
* sysdeps/sparc/sparc32/q_fgt.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_fle.c: Move to ....
* sysdeps/sparc/sparc32/q_fle.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_flt.c: Move to ....
* sysdeps/sparc/sparc32/q_flt.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_fne.c: Move to ....
* sysdeps/sparc/sparc32/q_fne.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: Move to ....
* sysdeps/sparc/sparc32/q_itoq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: Move to ....
* sysdeps/sparc/sparc32/q_lltoq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_mul.c: Move to ....
* sysdeps/sparc/sparc32/q_mul.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_neg.c: Move to ....
* sysdeps/sparc/sparc32/q_neg.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_qtod.c: Move to ....
* sysdeps/sparc/sparc32/q_qtod.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_qtoi.c: Move to ....
* sysdeps/sparc/sparc32/q_qtoi.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: Move to ....
* sysdeps/sparc/sparc32/q_qtoll.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_qtos.c: Move to ....
* sysdeps/sparc/sparc32/q_qtos.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: Move to ....
* sysdeps/sparc/sparc32/q_qtou.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: Move to ....
* sysdeps/sparc/sparc32/q_qtoull.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c: Move to ....
* sysdeps/sparc/sparc32/q_sqrt.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_stoq.c: Move to ....
* sysdeps/sparc/sparc32/q_stoq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_sub.c: Move to ....
* sysdeps/sparc/sparc32/q_sub.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: Move to ....
* sysdeps/sparc/sparc32/q_ulltoq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_util.c: Move to ....
* sysdeps/sparc/sparc32/q_util.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: Move to ....
* sysdeps/sparc/sparc32/q_utoq.c: ... here.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Move to ....
* sysdeps/sparc/sparc32/sfp-machine.h: ... here.
Currently, powerpc, powerpc64, and powerpc64le imply the same set of
subdirectories from sysdeps/ieee754: flt-32, dbl-64, ldbl-128ibm, and
ldbl-opt. In preparation for the transition of the long double format -
from IBM Extended Precision to IEEE 754 128-bits floating-point - on
powerpc64le, this patch splits the shared Implies file into three
separate files (one for each of the powerpc architectures), without
changing their contents. Future patches will modify powerpc64le.
Joseph Myers [Thu, 24 May 2018 22:02:32 +0000 (22:02 +0000)]
Remove sysdeps/powerpc/soft-fp directory.
As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>,
there should not be separate sysdeps/<arch>/soft-fp directories when
those are used by all configurations that use sysdeps/<arch>, and,
more generally, should not be sysdeps/foo/Implies files pointing to a
subdirectory foo/bar.
sysdeps/powerpc/soft-fp isn't quite such a case, as the Implies files
pointing to it are
sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/Implies and
sysdeps/unix/sysv/linux/powerpc/powerpc32/e500/nofpu/Implies (and
indeed there is a different sfp-machine.h used for powerpc64le).
However, the same principle applies: there is no need for this
directory because sfp-machine.h, the only file in it, can most
naturally go in sysdeps/powerpc/nofpu, which is used by exactly the
same configurations (and there is a close dependence between the files
there and the sfp-machine.h implementation). This patch eliminates
the sysdeps/powerpc/soft-fp directory accordingly.
Tested with build-many-glibcs.py that installed stripped shared
libraries for powerpc configurations are unchanged by this patch.
Joseph Myers [Wed, 23 May 2018 20:05:31 +0000 (20:05 +0000)]
Remove sysdeps/sh/soft-fp directory.
As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>,
there should not be separate sysdeps/<arch>/soft-fp directories when
those are used by all configurations that use sysdeps/<arch>, and,
more generally, should not be sysdeps/foo/Implies files pointing to a
subdirectory foo/bar. This patch eliminates the sysdeps/sh/soft-fp
directory accordingly, merging its contents into sysdeps/sh.
Tested with build-many-glibcs.py that installed stripped shared
libraries for sh configurations are unchanged by this patch.
Joseph Myers [Wed, 23 May 2018 17:29:20 +0000 (17:29 +0000)]
Remove sysdeps/alpha/soft-fp directory.
As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>,
there should not be separate sysdeps/<arch>/soft-fp directories when
those are used by all configurations that use sysdeps/<arch>, and,
more generally, should not be sysdeps/foo/Implies files pointing to a
subdirectory foo/bar. This patch eliminates the
sysdeps/alpha/soft-fp directory accordingly, merging its contents
into sysdeps/alpha.
Tested with build-many-glibcs.py that installed stripped shared
libraries for alpha-linux-gnu are unchanged by this patch.
* sysdeps/alpha/Implies: Remove alpha/soft-fp.
* sysdeps/alpha/Makefile [$(subdir) = soft-fp] (sysdep_routines):
Add functions moved from ....
[$(subdir) = math] (CPPFLAGS): Add -I../soft-fp. Moved from ....
* sysdeps/alpha/soft-fp/Makefile: ... here. Remove file.
* sysdeps/alpha/Versions (libc): Add GLIBC_2.3.4 symbols moved
from ....
* sysdeps/alpha/soft-fp/Versions: ... here. Remove file.
* sysdeps/alpha/soft-fp/e_sqrtl.c: Move to ....
* sysdeps/alpha/e_sqrtl.c: ... here.
* sysdeps/alpha/soft-fp/local-soft-fp.h: Move to ....
* sysdeps/alpha/local-soft-fp.h: ... here.
* sysdeps/alpha/soft-fp/ots_add.c: Move to ....
* sysdeps/alpha/ots_add.c: ... here.
* sysdeps/alpha/soft-fp/ots_cmp.c: Move to ....
* sysdeps/alpha/ots_cmp.c: ... here.
* sysdeps/alpha/soft-fp/ots_cmpe.c: Move to ....
* sysdeps/alpha/ots_cmpe.c: ... here.
* sysdeps/alpha/soft-fp/ots_cvtqux.c: Move to ....
* sysdeps/alpha/ots_cvtqux.c: ... here.
* sysdeps/alpha/soft-fp/ots_cvtqx.c: Move to ....
* sysdeps/alpha/ots_cvtqx.c: ... here.
* sysdeps/alpha/soft-fp/ots_cvttx.c: Move to ....
* sysdeps/alpha/ots_cvttx.c: ... here.
* sysdeps/alpha/soft-fp/ots_cvtxq.c: Move to ....
* sysdeps/alpha/ots_cvtxq.c: ... here.
* sysdeps/alpha/soft-fp/ots_cvtxt.c: Move to ....
* sysdeps/alpha/ots_cvtxt.c: ... here.
* sysdeps/alpha/soft-fp/ots_div.c: Move to ....
* sysdeps/alpha/ots_div.c: ... here.
* sysdeps/alpha/soft-fp/ots_mul.c: Move to ....
* sysdeps/alpha/ots_mul.c: ... here.
* sysdeps/alpha/soft-fp/ots_nintxq.c: Move to ....
* sysdeps/alpha/ots_nintxq.c: ... here.
* sysdeps/alpha/soft-fp/ots_sub.c: Move to ....
* sysdeps/alpha/ots_sub.c: ... here.
* sysdeps/alpha/soft-fp/sfp-machine.h: Move to ....
* sysdeps/alpha/sfp-machine.h: ... here.
Joseph Myers [Tue, 22 May 2018 17:23:34 +0000 (17:23 +0000)]
Remove sysdeps/aarch64/soft-fp directory.
As per <https://sourceware.org/ml/libc-alpha/2014-10/msg00369.html>,
there should not be separate sysdeps/<arch>/soft-fp directories when
those are used by all configurations that use sysdeps/<arch>, and,
more generally, should not be sysdeps/foo/Implies files pointing to a
subdirectory foo/bar. This patch eliminates the
sysdeps/aarch64/soft-fp directory accordingly, merging its contents
into sysdeps/aarch64.
Tested with build-many-glibcs.py that installed stripped shared
libraries for aarch64 configurations are unchanged by this patch.
* sysdeps/aarch64/Implies: Remove aarch64/soft-fp.
* sysdeps/aarch64/Makefile [$(subdir) = math] (CPPFLAGS): Add
-I../soft-fp. Moved from ....
* sysdeps/aarch64/soft-fp/Makefile: ... here. Remove file.
* sysdeps/aarch64/soft-fp/e_sqrtl.c: Move to ....
* sysdeps/aarch64/e_sqrtl.c: ... here.
* sysdeps/aarch64/soft-fp/sfp-machine.h: Move to ....
* sysdeps/aarch64/sfp-machine.h: ... here.
Joseph Myers [Tue, 22 May 2018 16:55:04 +0000 (16:55 +0000)]
Fix i686-linux-gnu build with GCC mainline.
Building with recent GCC mainline for i686-linux-gnu is failing with:
../sysdeps/ieee754/flt-32/k_rem_pio2f.c: In function '__kernel_rem_pio2f':
../sysdeps/ieee754/flt-32/k_rem_pio2f.c:186:28: error: 'fq[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
fv = math_narrow_eval (fq[0]-fv);
^
and
../sysdeps/ieee754/dbl-64/k_rem_pio2.c: In function '__kernel_rem_pio2':
../sysdeps/ieee754/dbl-64/k_rem_pio2.c:333:32: error: 'fq[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
fv = math_narrow_eval (fq[0] - fv);
^
These are similar to -Warray-bounds cases for which the DIAG_* macros
are already used in those files: the array element is in fact always
initialized, but the reasoning that it is depends on another array not
having been all zero at an earlier point, which depends on the
functions not being called with zero arguments. Thus, this patch uses
DIAG_* to disable -Wmaybe-uninitialized for this code.
(The warning may be i686-specific because of math_narrow_eval somehow
perturbing what the compiler does with this code enough to cause the
warning. I don't know why it doesn't appear for i686-gnu.)
Tested with build-many-glibcs.py that this fixes the i686 build in
this configuration.
* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2): Ignore
-Wmaybe-uninitialized around access to fq[0].
* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
Likewise.
Joseph Myers [Tue, 22 May 2018 15:44:01 +0000 (15:44 +0000)]
Make llseek a compat symbol (bug 18471).
The llseek function name is an obsolete, Linux-specific, unprototyped
name for lseek64 with a link-time warning. This patch completes the
obsoletion of this function name by making it into a compat symbol,
not available for newly linked programs and not included in the ABI
for new ports.
When a compat symbol is defined in syscalls.list, the code for that
function is not built at all for static linking unless some non-compat
symbol for that function is also defined with an explicit symbol
version, so an explicit symbol version for lseek64 is added to the
MIPS n32 syscalls.list. The case in make-syscalls.sh that handles
such explicit non-compat symbol versions then needs to be changed to
use weak_alias instead of strong_alias when the syscall is built
outside of libc, to avoid linknamespace failures from a strong lseek64
symbol in static libpthread.
The x32 llseek.S was as far as I could tell already unused (nothing
builds an llseek.* source file, at least since the lseek / lseek64 /
llseek consolidation), so is removed in this patch as well.
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #18471]
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak
aliases for non-libc case of versioned symbols.
* sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>.
(llseek): Define as compat symbol if
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias
with link warning.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek):
Make into a compat symbol, disabled for minimum symbol version
GLIBC_2.28 and later.
* sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
H.J. Lu [Mon, 21 May 2018 23:54:46 +0000 (16:54 -0700)]
x86-64: Check Prefer_FSRM in ifunc-memmove.h
Although the REP MOVSB implementations of memmove, memcpy and mempcpy
aren't used by the current processors, this patch adds Prefer_FSRM
check in ifunc-memmove.h so that they can be used in the future.
* sysdeps/x86/cpu-features.h (bit_arch_Prefer_FSRM): New.
(index_arch_Prefer_FSRM): Likewise.
* sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)):
Also check Prefer_FSRM.
* sysdeps/x86_64/multiarch/ifunc-memmove.h (IFUNC_SELECTOR):
Also return OPTIMIZE (erms) for Prefer_FSRM.
H.J. Lu [Mon, 21 May 2018 17:54:20 +0000 (10:54 -0700)]
Initial Fast Short REP MOVSB (FSRM) support
The newer Intel processors support Fast Short REP MOVSB which has a
feature bit in CPUID. This patch adds the Fast Short REP MOVSB (FSRM)
bit to x86 cpu-features.
Joseph Myers [Fri, 18 May 2018 17:30:18 +0000 (17:30 +0000)]
Split test-tgmath3 by function.
It has been noted that test-tgmath3 is slow to compile, and to link on
some systems
<https://sourceware.org/ml/libc-alpha/2018-02/msg00477.html>, because
of the size of the test.
I'm working on tgmath.h support for the TS 18661-1 / 18661-3 functions
that round their results to a narrower type. For the functions
already present in glibc, this wouldn't make test-tgmath3 much bigger,
because those functions only have two arguments. For the narrowing
versions of fma (for which I've not yet added the functions to glibc),
however, it would result in many configurations building tests of the
type-generic macros f32fma, f64fma, f32xfma, f64xfma, each with 21
possible types for each of three arguments (float, double, long double
aren't valid argument types for these macros when they return a
_FloatN / _FloatNx type), so substantially increasing the size of the
testcase.
To avoid further increasing the size of a single test when adding the
type-generic narrowing fma macros, this patch arranges for the
test-tgmath3 tests to be run separately for each function tested. The
fma tests are still by far the largest (next is pow, as that has two
arguments that can be real or complex; after that, the two-argument
real-only functions), but each type-generic fma macro for a different
return type would end up with its tests being run separately, rather
than increasing the size of a single test.
To avoid accidentally missing testing a macro because
gen-tgmath-tests.py supports testing it but the makefile fails to call
it for that function, a test is also added that verifies that the
lists of macros in the makefile and gen-tgmath-tests.py agree.
Tested for x86_64.
* math/gen-tgmath-tests.py: Import sys.
(Tests.__init__): Initialize macros_seen.
(Tests.add_tests): Add macro to macros_seen. Only generate tests
if requested to do so for this macro.
(Tests.add_all_tests): Take argument for macro for which to
generate tests.
(Tests.check_macro_list): New function.
(main): Handle check-list argument and argument specifying macro
for which to generate tests.
* math/Makefile [PYTHON] (tgmath3-macros): New variable.
[PYTHON] (tgmath3-macro-tests): Likewise.
[PYTHON] (tests): Add $(tgmath3-macro-tests) not test-tgmath3.
[PYTHON] (generated): Add $(addsuffix .c,$(tgmath3-macro-tests))
not test-tgmath3.c.
[PYTHON] (CFLAGS-test-tgmath3.c): Remove.
[PYTHON] ($(tgmath3-macro-tests:%=$(objpfx)%.o): Add -fno-builtin
to CFLAGS.
[PYTHON] ($(objpfx)test-tgmath3.c): Replace rule by....
[PYTHON] ($(foreach
m,$(tgmath3-macros),$(objpfx)test-tgmath3-$(m).c): ... this. New
rule.
[PYTHON] (tests-special): Add
$(objpfx)test-tgmath3-macro-list.out.
[PYTHON] ($(objpfx)test-tgmath3-macro-list.out): New rule.
Joseph Myers [Fri, 18 May 2018 16:50:44 +0000 (16:50 +0000)]
Obsolete nfsservctl.
The Linux nfsservctl syscall was removed in Linux 3.1. Since the
minimum kernel version for use with glibc is 3.2, the glibc wrapper
for this syscall can no longer usefully be called. This patch makes
it into a compat symbol, not provided at all for static linking or new
ports. (It was already the case that there was no header declaration
of this function.)
Tested for x86_64.
* sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a
compat symbol, disabled for minimum symbol version GLIBC_2.28 and
later.
Joseph Myers [Fri, 18 May 2018 11:57:15 +0000 (11:57 +0000)]
Fix year 2039 bug for localtime with 64-bit time_t (bug 22639).
Bug 22639 reports localtime failing to handle time offset transitions
correctly in 2039 and later on platforms with 64-bit time_t.
The problem is the use of SECSPERDAY (constant 86400) in calculations
such as
t = ((year - 1970) * 365
+ /* Compute the number of leapdays between 1970 and YEAR
(exclusive). There is a leapday every 4th year ... */
+ ((year - 1) / 4 - 1970 / 4)
/* ... except every 100th year ... */
- ((year - 1) / 100 - 1970 / 100)
/* ... but still every 400th year. */
+ ((year - 1) / 400 - 1970 / 400)) * SECSPERDAY;
where t is of type time_t and year is of type int. Before my commit 92bd70fb85bce57ac47ba5d8af008736832c955a (an update from tzcode,
included in 2.26 and later releases), SECSPERDAY was obtained from a
file imported from tzcode, where the value included a cast to
int_fast32_t. On 64-bit platforms, glibc defines int_fast32_t to be
long int, so 64-bit, but my patch resulted in it changing to int.
(The bug would probably have existed even before my patch for x32,
which has 64-bit time_t but 32-bit int_fast32_t, but I haven't
verified that.)
This patch fixes the problem by including a cast to time_t in the
definition of SECSPERDAY. (64-bit time support for 32-bit systems
should move such code that isn't a public interface to using the
internal 64-bit version of time_t throughout.)
Tested for x86_64 and x86.
[BZ #22639]
* time/tzset.c (SECSPERDAY): Cast to time_t.
* time/tst-y2039.c: New file.
* time/Makefile (tests): Add tst-y2039.
Florian Weimer [Thu, 17 May 2018 12:53:19 +0000 (14:53 +0200)]
math: Reverse include order in <math-type-macros-*.h>
_Float128 is defined for certain compilers indirectly from
<libm-alias-double.h>, and <ieee754_float128.h> (included from
<math-nan-payload-float128.h>) needs this definition.
Joseph Myers [Thu, 17 May 2018 00:40:52 +0000 (00:40 +0000)]
Add narrowing divide functions.
This patch adds the narrowing divide functions from TS 18661-1 to
glibc's libm: fdiv, fdivl, ddivl, f32divf64, f32divf32x, f32xdivf64
for all configurations; f32divf64x, f32divf128, f64divf64x,
f64divf128, f32xdivf64x, f32xdivf128, f64xdivf128 for configurations
with _Float64x and _Float128; __nldbl_ddivl for ldbl-opt.
The changes are mostly essentially the same as for the other narrowing
functions, so the description of those generally applies to this patch
as well.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
Fix concurrent changes on nscd aware files (BZ #23178)
As indicated by BZ#23178, concurrent access on some files read by nscd
may result non expected data send through service requisition. This is
due 'sendfile' Linux implementation where for sockets with zero-copy
support, callers must ensure the transferred portions of the the file
reffered by input file descriptor remain unmodified until the reader
on the other end of socket has consumed the transferred data.
I could not find any explicit documentation stating this behaviour on
Linux kernel documentation. However man-pages sendfile entry [1] states
in NOTES the aforementioned remark. It was initially pushed on man-pages
with an explicit testcase [2] that shows changing the file used in
'sendfile' call prior the socket input data consumption results in
previous data being lost.
From commit message it stated on tested Linux version (3.15) only TCP
socket showed this issues, however on recent kernels (4.4) I noticed the
same behaviour for local sockets as well.
Since sendfile on HURD is a read/write operation and the underlying
issue on Linux, the straightforward fix is just remove sendfile use
altogether. I am really skeptical it is hitting some hotstop (there
are indication over internet that sendfile is helpfull only for large
files, more than 10kb) here to justify that extra code complexity or
to pursuit other possible fix (through memory or file locks for
instance, which I am not sure it is doable).
Joseph Myers [Wed, 16 May 2018 00:05:28 +0000 (00:05 +0000)]
Add narrowing multiply functions.
This patch adds the narrowing multiply functions from TS 18661-1 to
glibc's libm: fmul, fmull, dmull, f32mulf64, f32mulf32x, f32xmulf64
for all configurations; f32mulf64x, f32mulf128, f64mulf64x,
f64mulf128, f32xmulf64x, f32xmulf128, f64xmulf128 for configurations
with _Float64x and _Float128; __nldbl_dmull for ldbl-opt.
The changes are mostly essentially the same as for the narrowing add
functions, so the description of those generally applies to this patch
as well. f32xmulf64 for i386 cannot use precision control as used for
add and subtract, because that would result in double rounding for
subnormal results, so that uses round-to-odd with long double
intermediate result instead. The soft-fp support involves adding a
new FP_TRUNC_COOKED since soft-fp multiplication uses cooked inputs
and outputs.
Tested for x86_64, x86, mips64 (all three ABIs, both hard and soft
float) and powerpc, and with build-many-glibcs.py.
powerpc: Fix the compiler type used with C++ when -mabi=ieeelongdouble
When compiling C++ code with -mabi=ieeelongdouble, KCtype is
unavailable and the long double type should be used instead.
This is also providing macro __HAVE_FLOAT128_UNLIKE_LDBL in order to
identify the kind of long double type is being used in the current
compilation unit.
Notice that bits/floatn.h cannot benefit from the new macro due to order
of header inclusion.
* bits/floatn-common.h: Define __HAVE_FLOAT128_UNLIKE_LDBL.
* math/math.h: Restrict the prototype definition for the functions
issignaling(_Float128) and iszero(_Float128); and template
__iseqsig_type<_Float128>, from __HAVE_DISTINCT_FLOAT128 to
__HAVE_FLOAT128_UNLIKE_LDBL.
* sysdeps/powerpc/bits/floatn.h [__HAVE_FLOAT128
&& (!__GNUC_PREREQ (7, 0) || defined __cplusplus)
&& __LDBL_MANT_DIG__ == 113]: Use long double suffix for
__f128() constants; define the type _Float128 as long double;
and reuse long double in __CFLOAT128.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Joseph Myers [Fri, 11 May 2018 15:11:38 +0000 (15:11 +0000)]
Do not include math-barriers.h in math_private.h.
This patch continues the math_private.h cleanup by stopping
math_private.h from including math-barriers.h and making the users of
the barrier macros include the latter header directly. No attempt is
made to remove any math_private.h includes that are now unused, except
in strtod_l.c where that is done to avoid line number changes in
assertions, so that installed stripped shared libraries can be
compared before and after the patch. (I think the floating-point
environment support in math_private.h should also move out - some
architectures already have fenv_private.h as an architecture-internal
header included from their math_private.h - and after moving that out
might be a better time to identify unused math_private.h includes.)
Tested for x86_64 and x86, and tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
aarch64,falkor: Ignore prefetcher tagging for smaller copies
For smaller and medium sized copies, the effect of hardware
prefetching are not as dominant as instruction level parallelism.
Hence it makes more sense to load data into multiple registers than to
try and route them to the same prefetch unit. This is also the case
for the loop exit where we are unable to latch on to the same prefetch
unit anyway so it makes more sense to have data loaded in parallel.
The performance results are a bit mixed with memcpy-random, with
numbers jumping between -1% and +3%, i.e. the numbers don't seem
repeatable. memcpy-walk sees a 70% improvement (i.e. > 2x) for 128
bytes and that improvement reduces down as the impact of the tail copy
decreases in comparison to the loop.
* sysdeps/aarch64/multiarch/memcpy_falkor.S (__memcpy_falkor):
Use multiple registers to copy data in loop tail.
aarch64,falkor: Ignore prefetcher hints for memmove tail
The tail of the copy loops are unable to train the falkor hardware
prefetcher because they load from a different base compared to the hot
loop. In this case avoid serializing the instructions by loading them
into different registers. Also peel the last iteration of the loop
into the tail (and have them use different registers) since it gives
better performance for medium sizes.
This results in performance improvements of between 3% and 20% over
the current falkor implementation for sizes between 128 bytes and 1K
on the memmove-walk benchmark, thus mostly covering the regressions
seen against the generic memmove.
* sysdeps/aarch64/multiarch/memmove_falkor.S
(__memmove_falkor): Use multiple registers to move data in
loop tail.
Joseph Myers [Thu, 10 May 2018 00:53:04 +0000 (00:53 +0000)]
Move math_check_force_underflow macros to separate math-underflow.h.
This patch continues cleaning up math_private.h by moving the
math_check_force_underflow set of macros to a separate header
math-underflow.h.
This header is included by the files that need it rather than from
math_private.h. Moving these macros to a separate file removes the
math_private.h uses of macros from float.h, so the inclusion of
float.h in math_private.h is also removed; files that were depending
on that inclusion are fixed to include float.h directly. The
inclusion of math-barriers.h from math_private.h will be removed in a
separate patch.
Tested for x86_64 and x86. Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.
Joseph Myers [Wed, 9 May 2018 19:45:47 +0000 (19:45 +0000)]
Move math_opt_barrier, math_force_eval to separate math-barriers.h.
This patch continues cleaning up math_private.h by moving the
math_opt_barrier and math_force_eval macros to a separate header
math-barriers.h.
At present, those macros are inside a "#ifndef math_opt_barrier" in
math_private.h to allow architectures to override them and then use
a separate math-barriers.h header, no such #ifndef or #include_next is
needed; architectures just have their own alternative version of
math-barriers.h when providing their own optimized versions that avoid
going through memory unnecessarily. The generic math-barriers.h has a
comment added to document these two macros.
In this patch, math_private.h is made to #include <math-barriers.h>,
so files using these macros do not need updating yet. That is because
of uses of math_force_eval in math_check_force_underflow and
math_check_force_underflow_nonneg, which are still defined in
math_private.h. Once those are moved out to a separate header, that
separate header can be made to include <math-barriers.h>, as can the
other files directly using these barrier macros, and then the include
of <math-barriers.h> from math_private.h can be removed.
Tested for x86_64 and x86. Also tested with build-many-glibcs.py that
installed stripped shared libraries are unchanged by this patch.
* sysdeps/generic/math-barriers.h: New file.
* sysdeps/generic/math_private.h [!math_opt_barrier]
(math_opt_barrier): Move to math-barriers.h.
[!math_opt_barrier] (math_force_eval): Likewise.
* sysdeps/aarch64/fpu/math-barriers.h: New file.
* sysdeps/aarch64/fpu/math_private.h (math_opt_barrier): Move to
math-barriers.h.
(math_force_eval): Likewise.
* sysdeps/alpha/fpu/math-barriers.h: New file.
* sysdeps/alpha/fpu/math_private.h (math_opt_barrier): Move to
math-barriers.h.
(math_force_eval): Likewise.
* sysdeps/x86/fpu/math-barriers.h: New file.
* sysdeps/i386/fpu/fenv_private.h (math_opt_barrier): Move to
math-barriers.h.
(math_force_eval): Likewise.
* sysdeps/m68k/m680x0/fpu/math_private.h: Move to....
* sysdeps/m68k/m680x0/fpu/math-barriers.h: ... here. Adjust
multiple-include guard for rename.
* sysdeps/powerpc/fpu/math-barriers.h: New file.
* sysdeps/powerpc/fpu/math_private.h (math_opt_barrier): Move to
math-barriers.h.
(math_force_eval): Likewise.
Joseph Myers [Wed, 9 May 2018 00:15:10 +0000 (00:15 +0000)]
Move math_narrow_eval to separate math-narrow-eval.h.
This patch continues cleaning up the math_private.h header, which
contains lots of different definitions many of which are only needed
by a limited subset of files using that header (and some of which are
overridden by architectures that only want to override selected parts
of the header), by moving the math_narrow_eval macro out to a separate
math-narrow-eval.h header, only included by those files that need it.
That header is placed in include/ (since it's used in stdlib/, not
just files built in math/, but no sysdeps variants are needed at
present).
Tested for x86_64, and with build-many-glibcs.py. (Installed stripped
shared libraries change because of line numbers in assertions in
strtod_l.c.)
benchtests: Move iterator declaration into loop header
This is a minor style change to move the definition of I to its usage
scope instead of at the top of the function. This is consistent with
glibc style guidelines and more importantly it was getting in the way
of my testing.
* benchtests/bench-memcpy-walk.c (do_test): Move declaration
of I into loop header.
* benchtests/bench-memmove-walk.c (do_test): Likewise.
Alexandre Oliva [Mon, 7 May 2018 04:37:37 +0000 (01:37 -0300)]
Revert:
2018-04-30 Raymond Nicholson <rain1@airmail.cc>
* manual/startup.texi (Aborting a Program): Remove inappropriate joke.
This complies with the decision of the project leader and primary and
ultimate maintainer, who partially delegated maintainership to myself
and others under certain constraints.
This is also in line with the community-agreed procedures.
It is obvious that we didn't have consensus on a decision to install
that patch, since both sides are still arguing over it.
As for the decision to reverse the deletion, if we even need one to
counter a move that did not have consensus, although nobody else offered
to install the reversal and restore the status prior to the fait
accompli, and some explicitly refused to do so themselves, nobody
objected when I offered to do so. Therefore, by the same reasoning that
led to the mistaken installation of the patch, and after a much longer
wait for objections, I understand there is consensus on my reverting it.
Paul Pluzhnikov [Sun, 6 May 2018 01:08:27 +0000 (18:08 -0700)]
Fix BZ 20419. A PT_NOTE in a binary could be arbitratily large, so using
alloca for it may cause stack overflow. If the note is larger than
__MAX_ALLOCA_CUTOFF, use dynamically allocated memory to read it in.
2018-05-05 Paul Pluzhnikov <ppluzhnikov@google.com>
Joseph Myers [Fri, 4 May 2018 15:46:32 +0000 (15:46 +0000)]
Ignore absolute symbols in ABI tests.
A recent binutils patch
<https://sourceware.org/ml/binutils/2018-04/msg00336.html> stops the
MIPS linker including the _gp_disp absolute symbol in dynamic symbol
tables.
With older binutils, it is included for MIPS o32 (despite the use of
symbol versioning), and this means that all the ABI test baselines for
MIPS o32 include "_gp_disp _gp_disp A". This symbol is not
meaningfully part of the ABI for shared libraries, since it always has
to be resolved at static link time to the local definition for the
linked object.
All the other absolute symbols in ABI test baselines are the names of
symbol versions. I don't think the mere existence of a symbol version
with a given name - as opposed to the contents of that version if
nonempty - is part of the ABI either. Thus, this patch allows the ABI
tests to pass both before and after the binutils change by changing
abilist.awk not to include absolute symbols in its output, and
changing the baselines accordingly.
Stefan Liebler [Fri, 4 May 2018 08:00:59 +0000 (10:00 +0200)]
Fix blocking pthread_join. [BZ #23137]
On s390 (31bit) if glibc is build with -Os, pthread_join sometimes
blocks indefinitely. This is e.g. observable with
testcase intl/tst-gettext6.
pthread_join is calling lll_wait_tid(tid), which performs the futex-wait
syscall in a loop as long as tid != 0 (thread is alive).
On s390 (and build with -Os), tid is loaded from memory before
comparing against zero and then the tid is loaded a second time
in order to pass it to the futex-wait-syscall.
If the thread exits in between, then the futex-wait-syscall is
called with the value zero and it waits until a futex-wake occurs.
As the thread is already exited, there won't be a futex-wake.
In lll_wait_tid, the tid is stored to the local variable __tid,
which is then used as argument for the futex-wait-syscall.
But unfortunately the compiler is allowed to reload the value
from memory.
With this patch, the tid is loaded with atomic_load_acquire.
Then the compiler is not allowed to reload the value for __tid from memory.
ChangeLog:
[BZ #23137]
* sysdeps/nptl/lowlevellock.h (lll_wait_tid):
Use atomic_load_acquire to load __tid.
H.J. Lu [Thu, 26 Apr 2018 12:01:20 +0000 (05:01 -0700)]
x86-64/swapcontext: Restore the pointer into %rdx after syscall
To prepare for shadow stack support, restore the pointer into %rdx after
syscall and use %rdx, instead of %rsi, to restore context. There is no
functional change.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/swapcontext.S (__swapcontext):
Restore the pointer into %rdx, after syscall and use %rdx,
instead of %rsi, to restore context.
H.J. Lu [Wed, 2 May 2018 13:21:09 +0000 (06:21 -0700)]
x86-64/setcontext: Pop the pointer into %rdx after syscall
To prepare for shadow stack support, pop the pointer into %rdx after
syscall and use %rdx, instead of %rsi, to restore context. There is
no functional change.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/x86_64/setcontext.S (__setcontext):
Pop the pointer into %rdx after syscall and use %rdx, instead
of %rsi, to restore context.
H.J. Lu [Wed, 2 May 2018 13:17:20 +0000 (06:17 -0700)]
x86: Use pad in pthread_unwind_buf to preserve shadow stack register
The pad array in struct pthread_unwind_buf is used by setjmp to save
shadow stack register. We assert that size of struct pthread_unwind_buf
is no less than offset of shadow stack pointer + shadow stack pointer
size.
Since functions, like LIBC_START_MAIN, START_THREAD_DEFN as well as
these with thread cancellation, call setjmp, but never return after
__libc_unwind_longjmp, __libc_unwind_longjmp, which is defined as
__libc_longjmp on x86, doesn't need to restore shadow stack register.
__libc_longjmp, which is a private interface for thread cancellation
implementation in libpthread, is changed to call __longjmp_cancel,
instead of __longjmp. __longjmp_cancel is a new internal function
in libc, which is similar to __longjmp, but doesn't restore shadow
stack register.
The compatibility longjmp and siglongjmp in libpthread.so are changed
to call __libc_siglongjmp, instead of __libc_longjmp, so that they will
restore shadow stack register.
Tested with build-many-glibcs.py.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nptl/pthread_create.c (START_THREAD_DEFN): Clear previous
handlers after setjmp.
* setjmp/longjmp.c (__libc_longjmp): Don't define alias if
defined.
* sysdeps/unix/sysv/linux/x86/setjmpP.h: Include
<libc-pointer-arith.h>.
(_JUMP_BUF_SIGSET_BITS_PER_WORD): New.
(_JUMP_BUF_SIGSET_NSIG): Changed to 96.
(_JUMP_BUF_SIGSET_NWORDS): Changed to use ALIGN_UP and
_JUMP_BUF_SIGSET_BITS_PER_WORD.
* sysdeps/x86/Makefile (sysdep_routines): Add __longjmp_cancel.
* sysdeps/x86/__longjmp_cancel.S: New file.
* sysdeps/x86/longjmp.c: Likewise.
* sysdeps/x86/nptl/pt-longjmp.c: Likewise.
As for sysctl, ustat has been deprecated in favor of {f}statfs. Also
some newer ports which uses generic interface builds a stub version that
returns ENOSYS.
This patch deprecates ustat interface by removing ustat.h related headers,
adding a compatibility symbol, and avoiding new ports to build and provide
the symbol.
Checked on x86_64-linux-gnu and i686-linux-gnu. Also checked with a
check-abi on all affected ABIs.
* NEWS: Add ustat.h deprecation entry.
* bits/ustat.h: Remove file.
* misc/sys/ustat.h: Likewise.
* misc/ustat.h: Likewise.
* sysdeps/unix/sysv/linux/generic/ustat.c: Likewise.
* misc/Makefile (headers): Remove ustat.h and sys/ustat.h.
* misc/ustat.c (__ustat): Rename to __old_ustat and export only in
compatibility mode.
* sysdeps/unix/sysv/linux/ustat.c (__ustat): Likewise.
* sysdeps/unix/sysv/linux/mips/ustat.c: Define DEV_TO_KDEV and use
generic Linux implementation.
This patch consolidate Linux readahead implementation on generic
sysdeps/unix/sysv/linux/readahead.c one. The changes are:
- Assume __NR_readahead existence with current minimum kernel of 3.2
for all architectures.
- Use INLINE_SYSCALL_CALL, __ALIGNMENT_ARG, and SYSCALL_LL64 to pass
the 64 bit offset. This allows architectures with different abis
to use the same implementation.
git://sourceware.org / glibc.git / log