elf: Fix localplt.awk for DT_RELR-enabled builds (BZ 31978)
For each input readelf output, localplt.awk parses each 'Relocation
section' entry, checks its offset against the dynamic section entry, and
saves each DT_JMPREL, DT_RELA, and DT_REL offset value it finds. After
all lines are read, the script checks if any segment offset differed
from 0, meaning at least one 'Relocation section' was matched.
However, if the shared object was built with RELR support and the static
linker could place all the relocation on DT_RELR, there would be no
DT_JMPREL, DT_RELA, and DT_REL entries; only a DT_RELR.
For the current three ABIs that support (aarch64, x86, and powerpc64),
the powerpc64 ld.so shows the behavior above. Both x86_64 and aarch64
show extra relocations on '.rela.dyn', which makes the script check to
succeed.
This patch fixes by handling DT_RELR, where the offset is checked
against the dynamic section entries and if the shared object contains an
entry it means that there are no extra PLT entries (since all
relocations are relative).
It fixes the elf/check-localplt failure on powerpc.
Checked with a build/check for aarch64-linux-gnu, x86_64-linux-gnu,
i686-linux-gnu, arm-linux-gnueabihf, s390x-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
linux: Also check pkey_get for ENOSYS on tst-pkey (BZ 31996)
The powerpc pkey_get/pkey_set support was only added for 64-bit [1],
and tst-pkey only checks if the support was present with pkey_alloc
(which does not fail on powerpc32, at least running a 64-bit kernel).
Samuel Thibault [Wed, 17 Jul 2024 12:56:14 +0000 (14:56 +0200)]
htl: Fix __pthread_init_thread declaration and definition
0e75c4a4634f ("hurd: Fix pthread_self() without libpthread") added a
declaration for ___pthread_init_thread instead of __pthread_init_thread,
and missed defining the external hidden symbol.
Samuel Thibault [Wed, 17 Jul 2024 12:06:25 +0000 (14:06 +0200)]
hurd: Fix pthread_self() without libpthread
5476f8cd2e68 ("htl: move pthread_self info libc.") moved the htl
pthread_self() function from libpthread to libc, replacing the previous libc
stub that just returns 0. And 53da64d1cf36 ("htl: Initialize ___pthread_self
early") added initialization code which is needed before being able to
call pthread_self. It is currently in libpthread, and thus never called
before programs can call pthread_self from libc, which then segfaults
when accessing _pthread_self()->thread.
This moves the initialization to libc itself, as initialized variables, so
pthread_self can always be called fine.
LoongArch: Add cfi instructions for _dl_tlsdesc_dynamic
In _dl_tlsdesc_dynamic, there are three 'addi.d sp, sp, -size'
instructions to allocate stack size for Float/LSX/LASX registers.
Every 'addi.d sp, sp, -size' needs a cfi_adjust_cfa_offset because
of sp is used to compute CFA. But only one 'addi.d sp, sp, -size'
will be run according to HWCAP value. And all cfi_adjust_cfa_offset
will be executed in stack unwinding, it result in incorrect CFA.
Change _dl_tlsdesc_dynamic to _dl_tlsdesc_dynamic,
_dl_tlsdesc_dynamic_lsx and _dl_tlsdesc_dynamic_lasx.
Conflicting cfi instructions can be distributed to the three functions.
And cfi instructions can correspond to stack down instructions.
Add pthread_getname_np and pthread_setname_np for Hurd
We use thread_get_name and thread_set_name to get and set the thread
name, so nothing is stored in the thread structure since these functions
are supposed to be called sparingly.
One notable difference with Linux is that the thread name is up to 32
chars, whereas Linux's is 16.
Also added a mach_RPC_CHECK to check for the existing of gnumach RPCs.
Samuel Thibault [Sat, 13 Jul 2024 15:00:55 +0000 (17:00 +0200)]
hurd: Fix restoring message to be retried
save_data stores the start of the original message to be retried,
overwritten by the EINTR reply. In 64b builds the overwrite is however
rounded up to the 64b pointer size, so we have to save more than just
the 32b err.
nptl: Convert tst-sem11 and tst-sem12 tests to use the test driver
Fix an issue with commit 2af4e3e5668f ("Test of semaphores.") by making
the tst-sem11 and tst-sem12 tests use the test driver, preventing them
from ever causing testing to hang forever and never complete, such as
currently happening with the 'mips-linux-gnu' (o32 ABI) target. Adjust
the name of the PREPARE macro, which clashes with the interpretation of
its presence by the test driver, by using a TF_ prefix in reference to
the name of the 'tf' function. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
nptl: Add copyright notice tst-sem11 and tst-sem12 tests
Add a copyright notice to the tst-sem11 and tst-sem12 tests, observing
that they have been originally contributed back in 2007, with commit 2af4e3e5668f ("Test of semaphores."). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Thu, 11 Jul 2024 09:28:53 +0000 (11:28 +0200)]
s390x: Fix segfault in wcsncmp [BZ #31934]
The z13/vector-optimized wcsncmp implementation segfaults if n=1
and there is only one character (equal on both strings) before
the page end. Then it loads and compares one character and misses
to check n again. The following load fails.
This patch removes the extra load and compare of the first character
and just start with the loop which uses vector-load-to-block-boundary.
This code-path also checks n.
With this patch both tests are passing:
- the simplified one mentioned in the bugzilla 31934
- the full one in Florian Weimer's patch:
"manual: Document a GNU extension for strncmp/wcsncmp"
(https://patchwork.sourceware.org/project/glibc/patch/874j9eml6y.fsf@oldenburg.str.redhat.com/):
On s390x-linux-gnu (z16), the new wcsncmp test fails due to bug 31934. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
DJ Delorie [Mon, 8 Jul 2024 21:52:15 +0000 (17:52 -0400)]
manual: add syscalls
The purpose of this patch is to add some system calls that (1) aren't
otherwise documented, and (2) are merely redirected to the kernel, so
can refer to their documentation; and define a standard way of doing
so in the future. A more detailed explaination of how system calls
are wrapped is added along with reference to the Linux Man-Pages
project.
Default version of man-pages is in configure.ac but can be overridden
by --with-man-pages=X.Y
Adam Sampson [Mon, 6 May 2024 17:16:33 +0000 (18:16 +0100)]
ldconfig: Ignore all GDB extension files
ldconfig already ignores files with the -gdb.py suffix, but GDB also
looks for -gdb.gdb and -gdb.scm files. These aren't as widely used, but
libguile at least comes with a -gdb.scm file.
Rename is_gdb_python_file to is_gdb_extension_file, and make it
recognise all three types of GDB extension.
Signed-off-by: Adam Sampson <ats@offog.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This hasn't been looked at for a loong time (already guessing from
the number of missing entries), and it ain't pretty.
There are some 9-ulps results for float.
- ZaZaZebra (qemu-system-m68k clone of PowerBook 190 system)
- GCC 13.3.1 20240614 (Gentoo 13.3.1_p20240614 p17)
- ld GNU ld (Gentoo 2.42 p6) 2.42.0
- Linux ZaZaZebra 4.19.0-5-m68k #1 Gentoo 4.19.37-5 (2019-06-19) m68k 68040 68040 GNU/Linux
- manual build
- ../glibc/configure --enable-fortify-source --prefix=/usr
- Tested by Immolo (via Andreas K. Hüttel)
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
stdlib: fix arc4random fallback to /dev/urandom (BZ 31612)
The __getrandom_nocancel used by __arc4random_buf uses
INLINE_SYSCALL_CALL (which returns -1/errno) and the loop checks for
the return value instead of errno to fallback to /dev/urandom.
The malloc code now uses __getrandom_nocancel_nostatus, which uses
INTERNAL_SYSCALL_CALL, so there is no need to use the variant that does
not set errno (BZ#29624).
Michael Jeanson [Wed, 3 Jul 2024 16:35:34 +0000 (12:35 -0400)]
nptl: fix potential merge of __rseq_* relro symbols
While working on a patch to add support for the extensible rseq ABI, we
came across an issue where a new 'const' variable would be merged with
the existing '__rseq_size' variable. We tracked this to the use of
'-fmerge-all-constants' which allows the compiler to merge identical
constant variables. This means that all 'const' variables in a compile
unit that are of the same size and are initialized to the same value can
be merged.
In this specific case, on 32 bit systems 'unsigned int' and 'ptrdiff_t'
are both 4 bytes and initialized to 0 which should trigger the merge.
However for reasons we haven't delved into when the attribute 'section
(".data.rel.ro")' is added to the mix, only variables of the same exact
types are merged. As far as we know this behavior is not specified
anywhere and could change with a new compiler version, hence this patch.
Move the definitions of these variables into an assembler file and add
hidden writable aliases for internal use. This has the added bonus of
removing the asm workaround to set the values on rseq registration.
Florian Weimer [Thu, 2 May 2024 14:26:36 +0000 (16:26 +0200)]
manual: Recommendations for dynamic linker hardening
This new section in the manual provides recommendations for
use of glibc in environments with higher integrity requirements.
It's reflecting both current implementation shortcomings, and
challenges we inherit from ELF and psABI requirements.
The new testcase elf/tst-tunables-enable_secure-env segfaults on s390 (31bit).
There _start parses the auxiliary vector for some additional checks.
Therefore it skips over the zeros after the environment variables ...
0x7fffac20: 0x7fffbd17 0x7fffbd32 0x7fffbd69 0x00000000
------------------------------------------------^^^last environment variable
... and then it parses the auxiliary vector and stops at AT_NULL.
0x7fffac30: 0x00000000 0x00000021 0x00000000 0x00000000
--------------------------------^^^AT_SYSINFO_EHDR--------------^^^AT_NULL
----------------^^^newp-----------------------------------------^^^oldp
Afterwards it tries to access AT_PHDR which points to somewhere and segfaults.
Due to not incorporating the skip_env variable in the computation of oldp
when shuffling down the auxv in rtld.c, it just copies one entry with AT_NULL
and value 0x00000021 and stops the loop. In reality we have skipped
GLIBC_TUNABLES environment variable (=> skip_env=1). Thus we should copy from
here:
0x7fffac40: 0x00000021 0x7ffff000 0x00000010 0x007fffff
----------------^^^fixed-oldp
This patch fixes the computation of oldp when shuffling down auxiliary vector.
It also adds some checks in the testcase. Those checks also fail on
s390x (64bit) and x86_64 without the fix.
hppa/vdso: Provide 64-bit clock_gettime() vDSO only
Adhemerval noticed that the gettimeofday() and 32-bit clock_gettime()
vDSO calls won't be used by glibc on hppa, so there is no need to
declare them. Both syscalls will be emulated by utilizing return values
of the 64-bit clock_gettime() vDSO instead.
The clang open fortify wrapper from 4228baef1a94e8bde84ad74 added
a restriction where open with 3 arguments where flags do not
contain O_CREAT or O_TMPFILE are handled as invalid. They are
not invalid, since the third argument is ignored, and the gcc
wrapper also allows it.
Checked x86_64-linux-gnu and with a yocto build for some affected
packages. Tested-by: “Khem Raj <raj.khen@gmail.com>”
H.J. Lu [Thu, 20 Jun 2024 22:28:13 +0000 (15:28 -0700)]
Add --disable-static-c++-tests option [BZ #31797]
By default, if the C++ toolchain lacks support for static linking,
configure fails to find the C++ header files and the glibc build fails.
The --disable-static-c++-link-check option allows the glibc build to
finish, but static C++ tests will fail if the C++ toolchain doesn't
have the necessary static C++ libraries which may not be easily installed.
Add --disable-static-c++-tests option to skip the static C++ link check
and tests. This fixes BZ #31797.
The current minimum GCC version of glibc build is GCC 6.2 or newer. But
building i686 glibc with GCC 6.4 on Fedora 40 failed since the C++ header
files couldn't be found which was caused by the static C++ link check
failure due to missing __divmoddi4 which was referenced in i686 libc.a
and added to GCC 7. Add --disable-static-c++-link-check configure option
to disable the static C++ link test. The newly built i686 libc.a can be
used by GCC 6.4 to create static C++ tests. This fixes BZ #31412.
elf: Support recursive use of dynamic TLS in interposed malloc
It turns out that quite a few applications use bundled mallocs that
have been built to use global-dynamic TLS (instead of the recommended
initial-exec TLS). The previous workaround from
commit afe42e935b3ee97bac9a7064157587777259c60e ("elf: Avoid some
free (NULL) calls in _dl_update_slotinfo") does not fix all
encountered cases unfortunatelly.
This change avoids the TLS generation update for recursive use
of TLS from a malloc that was called during a TLS update. This
is possible because an interposed malloc has a fixed module ID and
TLS slot. (It cannot be unloaded.) If an initially-loaded module ID
is encountered in __tls_get_addr and the dynamic linker is already
in the middle of a TLS update, use the outdated DTV, thus avoiding
another call into malloc. It's still necessary to update the
DTV to the most recent generation, to get out of the slow path,
which is why the check for recursion is needed.
The bookkeeping is done using a global counter instead of per-thread
flag because TLS access in the dynamic linker is tricky.
All this will go away once the dynamic linker stops using malloc
for TLS, likely as part of a change that pre-allocates all TLS
during pthread_create/dlopen.
Carlos O'Donell [Wed, 19 Jun 2024 15:48:05 +0000 (11:48 -0400)]
Fix conditionals on mtrace-based tests (bug 31892)
The conditionals for several mtrace-based tests in catgets, elf, libio,
malloc, misc, nptl, posix, and stdio-common were incorrect leading to
test failures when bootstrapping glibc without perl.
The correct conditional for mtrace-based tests requires three checks:
first checking for run-built-tests, then build-shared, and lastly that
PERL is not equal to "no" (missing perl). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
MayShao-oc [Sat, 29 Jun 2024 03:58:28 +0000 (11:58 +0800)]
x86: Set default non_temporal_threshold for Zhaoxin processors
Current 'non_temporal_threshold' set to 'non_temporal_threshold_lowbound'
on Zhaoxin processors without ERMS. The default
'non_temporal_threshold_lowbound' is too small for the KH-40000 and KX-7000
Zhaoxin processors, this patch updates the value to
'shared / cachesize_non_temporal_divisor'. Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
MayShao-oc [Sat, 29 Jun 2024 03:58:27 +0000 (11:58 +0800)]
x86_64: Optimize large size copy in memmove-ssse3
This patch optimizes large size copy using normal store when src > dst
and overlap. Make it the same as the logic in memmove-vec-unaligned-erms.S.
Current memmove-ssse3 use '__x86_shared_cache_size_half' as the non-
temporal threshold, this patch updates that value to
'__x86_shared_non_temporal_threshold'. Currently, the
__x86_shared_non_temporal_threshold is cpu-specific, and different CPUs
will have different values based on the related nt-benchmark results.
However, in memmove-ssse3, the nontemporal threshold uses
'__x86_shared_cache_size_half', which sounds unreasonable.
The performance is not changed drastically although shows overall
improvements without any major regressions or gains.
Results on Zhaoxin KX-7000:
bench-memcpy geometric_mean(N=20) New / Original: 0.999
bench-memcpy-random geometric_mean(N=20) New / Original: 0.999
bench-memcpy-large geometric_mean(N=20) New / Original: 0.978
bench-memmove geometric_mean(N=20) New / Original: 1.000
bench-memmmove-large geometric_mean(N=20) New / Original: 0.962
Results on Intel Core i5-6600K:
bench-memcpy geometric_mean(N=20) New / Original: 1.001
bench-memcpy-random geometric_mean(N=20) New / Original: 0.999
bench-memcpy-large geometric_mean(N=20) New / Original: 1.001
bench-memmove geometric_mean(N=20) New / Original: 0.995
bench-memmmove-large geometric_mean(N=20) New / Original: 0.936 Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
MayShao-oc [Sat, 29 Jun 2024 03:58:26 +0000 (11:58 +0800)]
x86: Set preferred CPU features on the KH-40000 and KX-7000 Zhaoxin processors
Fix code formatting under the Zhaoxin branch and add comments for
different Zhaoxin models.
Unaligned AVX load are slower on KH-40000 and KX-7000, so disable
the AVX_Fast_Unaligned_Load.
Enable Prefer_No_VZEROUPPER and Fast_Unaligned_Load features to
use sse2_unaligned version of memset,strcpy and strcat. Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Andrew Pinski [Wed, 12 Jun 2024 22:53:36 +0000 (15:53 -0700)]
Aarch64: Add new memset for Qualcomm's oryon-1 core
Qualcom's new core, oryon-1, has a different characteristics for
memset than the current versions of memset. For non-zero, larger
sizes, using GPRs rather than the SIMD stores is ~30% faster.
For even larger sizes, using the nontemporal stores is needed
not to polute the L1/L2 caches.
For zero values, using `dc zva` should be used. Since we
know the size will always be 64 bytes, we don't need to figure
out the size there.
I started with the emag memset and added back the `dc zva` code.
Changes since v1:
* v3: Fix comment formating
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Andrew Pinski [Wed, 12 Jun 2024 22:53:35 +0000 (15:53 -0700)]
Aarch64: Add memcpy for qualcomm's oryon-1 core
Qualcomm's new core (oryon-1) has a different performance characteristic
than other cores. For memcpy, it is faster to use the GPRs to
do the copy for large sizes (2x faster). For even larger sizes,
it is better to use the nontemporal load/store instructions so
we don't pollute the L1/L2 caches.
For smaller sizes, the characteristic are very similar to
other cores.
I used the thunderx memcpy as a starting point and expanded from there.
Changes since v1:
* v2: Fix ordering in Makefile.
* v3: Fix comment grammar about the ldnp/stnp instructions.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The fcntl.h fortify wrapper for clang added by 86889e22db329abac61
missed the __fortify_clang_overload_arg and and also added the
mode argument for the __fortify_function_error_function function,
which leads clang to be able to correct resolve which overloaded
function it should emit.
The mqueue.h fortify wrapper for clang added by c23107effbfe5300
is not fully correct, where correct 4 argument usage are not
being correctly handled. For instance, while building socat 1.8
with a yocto clang based system shows:
./socat-1.8.0.0/xio-posixmq.c:119:8: error: 'mq_open' is unavailable: mq_open can be called either with 2 or 4 arguments
119 | mqd = mq_open(name, oflag, opt_mode, NULL);
| ^
[...] /usr/include/bits/mqueue2.h:66:8: note: 'mq_open' has been explicitly marked unavailable here
66 | __NTH (mq_open (const char *__name, int __oflag, mode_t mode,
| ^
1 error generated.
The correct way to define the wrapper is to set invalid usage
with __fortify_clang_unavailable (for the case with 5 or more
arguments), followed by the expected ones. This fix make mq_open
similar to current open wrappers.
With gcc 14, I get this warning/werror when building the localedata tests:
tests-mbwc/tsp_common.c: In function ‘result.constprop.isra’:
tests-mbwc/tsp_common.c:55:43: error: ‘%s’ directive writing up to 92 bytes into a region of size between 0 and 114 [-Werror=format-overflow=]
55 | sprintf (result_rec, "%s:%s:%d:%d:%d:%c:%s\n", func, loc, rec_no, seq_no,
| ^~
In file included from ../include/bits/stdio2.h:1,
from ../libio/stdio.h:980,
from ../include/stdio.h:14,
from tests-mbwc/tsp_common.c:10:
In function ‘sprintf’,
inlined from ‘result.constprop.isra’ at tests-mbwc/tsp_common.c:55:3:
../libio/bits/stdio2.h:30:10: note: ‘__builtin___sprintf_chk’ output between 20 and 234 bytes into a destination of size 132
30 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
31 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
32 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This patch now gets rid of using sprintf and the result_rec buffer and just
prints to fp directly.
Paul Eggert [Wed, 26 Jun 2024 15:14:26 +0000 (16:14 +0100)]
Fix strnlen doc re array size
* manual/string.texi: For strnlen (s, maxlen), do not say that s must
be of size maxlen, as it can be smaller if it is null-terminated.
This should help avoid confusion such as seen in
<https://lists.gnu.org/r/bug-gnulib/2024-06/msg00280.html>.
Mention that strnlen and wcsnlen have been in POSIX since
POSIX.1-2008.
posix: Fix pidfd_spawn/pidfd_spawnp leak if execve fails (BZ 31695)
If the pidfd_spawn/pidfd_spawnp helper process succeeds, but evecve
fails for some reason (either with an invalid/non-existent, memory
allocation, etc.) the resulting pidfd is never closed, nor returned
to caller (so it can call close).
Since the process creation failed, it should be up to posix_spawn to
also, close the file descriptor in this case (similar to what it
does to reap the process).
This patch also changes the waitpid with waitid (P_PIDFD) for pidfd
case, to avoid a possible pid re-use.
Checked on x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The atomic_spin_nop() macro can be used to run arch-specific
code in the body of a spin loop to potentially improve efficiency.
RISC-V's Zihintpause extension includes a PAUSE instruction for
this use-case, which is encoded as a HINT, which means that it
behaves like a NOP on systems that don't implement Zihintpause.
Binutils supports Zihintpause since 2.36, so this patch uses
the ".insn" directive to keep the code compatible with older
toolchains.
The upcoming parisc (hppa) v6.11 Linux kernel will include vDSO
support for gettimeofday(), clock_gettime() and clock_gettime64()
syscalls for 32- and 64-bit userspace.
The patch below adds the necessary glue code for glibc.
Signed-off-by: Helge Deller <deller@gmx.de>
Changes in v2:
- add vsyscalls for 64-bit too
Wilco Dijkstra [Thu, 20 Jun 2024 10:43:54 +0000 (11:43 +0100)]
Benchtests: Remove broken walk benchmarks
The walk benchmarks don't measure anything useful - memory is not initialized
properly so doing a single walk in 32MB just measures reading the 4KB zero
page for reads and clear_page overhead for writes. The memset variants don't
even manage to do a walk in the 32MB region due to using incorrect pointer
increments... Neither is it clear why it is walking backwards since this
won't confuse modern prefetchers. If you fix the benchmark and print the
bandwidth, the results are identical for all sizes larger than ~1KB since it
is just testing memory bandwidth of a single 32MB block. This case is already
tested by the large benchmark, so overall it doesn't seem useful to keep these.
Florian Weimer [Thu, 20 Jun 2024 18:55:10 +0000 (20:55 +0200)]
malloc: Replace shell/Perl gate in mtrace
The previous version expanded $0 and $@ twice.
The new version defines a q no-op shell command. The Perl syntax
error is masked by the eval Perl function. The q { … } construct
is executed by the shell without errors because the q shell function
was defined, but treated as a non-expanding quoted string by Perl,
effectively hiding its context from the Perl interpreter. As before
the script is read by require instead of executed directly, to avoid
infinite recursion because the #! line contains /bin/sh.
Introduce the “fatal” function to produce diagnostics that are not
suppressed by “do”. Use “do” instead of “require” because it has
fewer requirements on the executed script than “require”.
Prefix relative paths with './' because “do” (and “require“ before)
searches for the script in @INC if the path is relative and does not
start with './'. Use $_ to make the trampoline shorter.
Add an Emacs mode marker to indentify the script as a Perl script.
Florian Weimer [Thu, 20 Jun 2024 09:09:37 +0000 (11:09 +0200)]
i386: Update ulps
Based on a -march=x86-64-v4 -mfpmath=sse build, with and without
--disable-multi-arch, running on a Zen 4 CPU. Also used different
-march=x8i6-64-v… settings.
Florian Weimer [Thu, 20 Jun 2024 08:32:16 +0000 (10:32 +0200)]
malloc: Always install mtrace (bug 31892)
Generation of the Perl script does not depend on Perl, so we can
always install it even if $(PERL) is not set during the build.
Change the malloc/mtrace.pl text substition not to rely on $(PERL).
Instead use PATH at run time to find the Perl interpreter. The Perl
interpreter cannot execute directly a script that starts with
“#! /bin/sh”: it always executes it with /bin/sh. There is no
perl command line switch to disable this behavior. Instead, use
the Perl require function to execute the script. The additional
shift calls remove the “.” shell arguments. Perl interprets the
“.” as a string concatenation operator, making the expression
syntactically valid.
mengqinggang [Fri, 14 Jun 2024 03:58:30 +0000 (11:58 +0800)]
LoongArch: Fix _dl_tlsdesc_dynamic in LSX case
HWCAP value is overwritten at the first comparison of the LASX case.
The second comparison at LSX get incorrect result.
Change to use t0 to save HWCAP value, and use t1 to save comparison
result.
Carlos Llamas [Tue, 18 Jun 2024 08:56:34 +0000 (10:56 +0200)]
linux: add definitions for hugetlb page size encodings
A desired hugetlb page size can be encoded in the flags parameter of
system calls such as mmap() and shmget(). The Linux UAPI headers have
included explicit definitions for these encodings since v4.14.
This patch adds these definitions that are used along with MAP_HUGETLB
and SHM_HUGETLB flags as specified in the corresponding man pages. This
relieves programs from having to duplicate and/or compute the encodings
manually.
Additionally, the filter on these definitions in tst-mman-consts.py is
removed, as suggested by Florian. I then ran this tests successfully,
confirming the alignment with the kernel headers.
Stefan Liebler [Fri, 7 Jun 2024 11:42:44 +0000 (13:42 +0200)]
elf: Remove HWCAP_IMPORTANT
Remove the definitions of HWCAP_IMPORTANT after removal of
LD_HWCAP_MASK / tunable glibc.cpu.hwcap_mask. There HWCAP_IMPORTANT
was used as default value. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the environment variable LD_HWCAP_MASK and the tunable
glibc.cpu.hwcap_mask as those are not used anymore in common-code
after removal in elf/dl-cache.c:search_cache().
The only remaining user is sparc32 where it is used in
elf_machine_matches_host(). If sparc32 does not need it anymore,
we can get rid of it at all. Otherwise we could also move
LD_HWCAP_MASK / tunable glibc.cpu.hwcap_mask to be sparc32 specific. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Fri, 7 Jun 2024 11:42:42 +0000 (13:42 +0200)]
elf: Remove _DL_PLATFORMS_COUNT
Remove the definitions of _DL_PLATFORMS_COUNT as those are not used
anymore after removal in elf/dl-cache.c:search_cache().
Note: On x86, we can also get rid of the definitions
HWCAP_PLATFORMS_START and HWCAP_PLATFORMS_COUNT. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Fri, 7 Jun 2024 11:42:41 +0000 (13:42 +0200)]
elf: Remove _DL_FIRST_PLATFORM
Remove the definitions of _DL_FIRST_PLATFORM as those were only used
in the _DL_HWCAP_PLATFORM definitions and in _dl_string_platform().
Both were removed.
Note: Removed on every architecture despite of powerpc, where
_dl_string_platform() is still used. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Fri, 7 Jun 2024 11:42:40 +0000 (13:42 +0200)]
elf: Remove _DL_HWCAP_PLATFORM
Remove the definitions of _DL_HWCAP_PLATFORM as those are not used
anymore after removal in elf/dl-cache.c:search_cache(). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Wed, 12 Jun 2024 07:32:36 +0000 (09:32 +0200)]
elf: Remove platform strings in dl-procinfo.c
Remove the platform strings in dl-procinfo.c where also
the implementation of _dl_string_platform() was removed. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Fri, 7 Jun 2024 11:42:38 +0000 (13:42 +0200)]
elf: Remove _dl_string_platform
Despite of powerpc where the returned integer is stored in tcb,
and the diagnostics output, there is no user anymore.
Thus this patch removes the diagnostics output and
_dl_string_platform for all other platforms. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
According to Florian Weimer, this was an oversight and should also
have been removed.
As ldconfig does not generate ld.so.cache entries with hwcap/platform
bits in the hwcap-field anymore, this patch now skips those entries.
Thus currently only named-hwcap-entries and the default entries are
allowed.
For named-hwcap entries bit 62 is set and also the isa-level bits can
be set.
For the default entries the hwcap-field is 0. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Stefan Liebler [Fri, 7 Jun 2024 11:42:36 +0000 (13:42 +0200)]
x86: Remove HWCAP_START and HWCAP_COUNT
Both defines are not used anymore. Those were only used for
_dl_string_hwcap(), which itself was removed with commit ab40f20364f4a417a63dd51fdd943742070bfe96
"elf: Remove _dl_string_hwcap"
Just clean up. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Joseph Myers [Mon, 17 Jun 2024 16:31:49 +0000 (16:31 +0000)]
Implement C23 exp2m1, exp10m1
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and
exp10(x)-1, like expm1).
As with other such functions, these use type-generic templates that
could be replaced with faster and more accurate type-specific
implementations in future. Test inputs are copied from those for
expm1, plus some additions close to the overflow threshold (copied
from exp2 and exp10) and also some near the underflow threshold.
exp2m1 has the unusual property of having an input (M_MAX_EXP) where
whether the function overflows (under IEEE semantics) depends on the
rounding mode. Although these could reasonably be XFAILed in the
testsuite (as we do in some cases for arguments very close to a
function's overflow threshold when an error of a few ulps in the
implementation can result in the implementation not agreeing with an
ideal one on whether overflow takes place - the testsuite isn't smart
enough to handle this automatically), since these functions aren't
required to be correctly rounding, I made the implementation check for
and handle this case specially.
The Makefile ordering expected by lint-makefiles for the new functions
is a bit peculiar, but I implemented it in this patch so that the test
passes; I don't know why log2 also needed moving in one Makefile
variable setting when it didn't in my previous patches, but the
failure showed a different place was expected for that function as
well.
The powerpc64le IFUNC setup seems not to be as self-contained as one
might hope; it shouldn't be necessary to add IFUNCs for new functions
such as these simply to get them building, but without setting up
IFUNCs for the new functions, there were undefined references to
__GI___expm1f128 (that IFUNC machinery results in no such function
being defined, but doesn't stop include/math.h from doing the
redirection resulting in the exp2m1f128 and exp10m1f128
implementations expecting to call it).
Tested for x86_64 and x86, and with build-many-glibcs.py.