1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
_STACK_GROWS_DOWN is defined to 0 when the stack grows up. The
code in unwind.c used `#ifdef _STACK_GROWS_DOWN' to selct the
stack grows down define for FRAME_LEFT. As a result, the
_STACK_GROWS_DOWN define was always selected and cleanups were
incorrectly sequenced when the stack grows up.
1. Also generate .d dependency files for $(tests-container) and
$(tests-printers).
2. elf: Add tst-auditmod17.os to extra-test-objs.
3. iconv: Add tst-gconv-init-failure-mod.os to extra-test-objs.
4. malloc: Rename extra-tests-objs to extra-test-objs.
5. linux: Add tst-sysconf-iov_max-uapi.o to extra-test-objs.
6. x86_64: Add tst-x86_64mod-1.o, tst-platformmod-2.o, test-libmvec.o,
test-libmvec-avx.o, test-libmvec-avx2.o and test-libmvec-avx512f.o to
extra-test-objs. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Carlos O'Donell [Thu, 3 Feb 2022 21:01:52 +0000 (16:01 -0500)]
localedata: Do not generate output if warnings were present.
With LC_MONETARY parsing fixed we can now generate locales
without forcing output with '-c'.
Removing '-c' from localedef invocation is the equivalent of
using -Werror for localedef. The glibc locale sources should
always be clean and free from warnings.
We remove '-c' from both test locale generation and the targets
used for installing locales e.g. install-locale-archive, and
install-locale-files.
Tested on x86_64 and i686 without regressions.
Tested with install-locale-archive target.
Tested with install-locale-files target.