I saw this in a bug report:
[root@xxxx-01 ~]# lvconvert -m 1 --corelog VG/cmirror
Unable to convert the log of inactive cluster mirror cmirror
I've tried to clean-up the message a little more, so the name
of the mirror stands out more while preserving the sense that
it's not a problem with the specific device, but the fact that
it is inactive that is causing the problem.
New msg:
Unable to convert the log of an inactive cluster mirror, cmirror
configure.in: don't set default file owner and group
Per discussion on lvm-devel mailing list and part of debian patch set,
don't set defaults for owner and group, since nobody seems to use them, and
still allow override.
Add --pvmetadatacopies as a synonym for --metadatacopies in various commands.
Going forward, we would like to allow users to specify the total
number of metadatacopies in a VG rather than on a per-PV basis. In
order to facilitate that, introduce --pvmetadatacopes to replace
--metadatacopies everywhere. We still allow --metadatacopies for
pv commands, but require --pvmetadatacopies for vg commands.
Eventually we will introduce --vgmetadatacopies. Once we do that,
we should either deprecate --metadatacopies or make it a synonym based
on the command (pvmetadatacopies for pv commands, and vgmetadatacopies
for vg commands). The latter option would likely just require a simple
'strncpy' check against cmd->command->name to qualify the merge_synonym
call.
Update nightly tests to cover the pvmetadatacopies synonym.
Note that this patch is the result of an eariler review comment for
the implicit pvcreate patches. Should apply cleanly on top of the
implicit pvcreate patches (I applied after patch 10/10 in that series).
NOTE: This patch will require --pvmetadatacopies for vgconvert as
--metadatacopies is no longer accepted.
Add --pvmetadatacopies as a synonym for --metadatacopies in various commands.
Going forward, we would like to allow users to specify the total
number of metadatacopies in a VG rather than on a per-PV basis. In
order to facilitate that, introduce --pvmetadatacopes to replace
--metadatacopies everywhere. We still allow --metadatacopies for
pv commands, but require --pvmetadatacopies for vg commands.
Eventually we will introduce --vgmetadatacopies. Once we do that,
we should either deprecate --metadatacopies or make it a synonym based
on the command (pvmetadatacopies for pv commands, and vgmetadatacopies
for vg commands). The latter option would likely just require a simple
'strncpy' check against cmd->command->name to qualify the merge_synonym
call.
Update nightly tests to cover the pvmetadatacopies synonym.
Note that this patch is the result of an eariler review comment for
the implicit pvcreate patches. Should apply cleanly on top of the
implicit pvcreate patches (I applied after patch 10/10 in that series).
NOTE: This patch will require --pvmetadatacopies for vgconvert as
--metadatacopies is no longer accepted.
Update vgcreate and vgextend man pages to clarify implicit pvcreate.
vgcreate and vgextend now implicitly call pvcreate on devices not
currently initialized for LVM use. Previously these commands would
fail with an error, so clarify the new behavior in the man page.
Add implicit pvcreate support to vgcreate and vgextend.
Adds implicit pvcreate support when calling vgcreate or vgextend with
device paths that are not yet PVs. This changes the behavior of vgcreate
and vgextend from failing with an error message to implicitly pvcreating.
Refactor pvcreate - split pvcreate_validate_params into recovery/non-recovery.
Split pvcreate_validate_params into recovery and non-recovery parameters.
This is necessary so we can call the non-recovery validate function from
vgextend / vgcreate. Note in the pvcreate tool case, we must call the
recovery validation function first (see treatment of pe_start and --zero),
and that we add a call to fill_default_pvcreate_params before the validation
functions.
Allow calling fill_default_pvcreate_params from tools.
We need defaults for pvcreate_params at a higher level - this will
allow us to use a common function from the tools to take defaults,
then fill in any non-defaults from the commandline.
Future patches will refactor vgcreate/vgextend to call this function
if one or more pvcreate parameters are given on the commandline.
Another refactoring for implicit pvcreate support. We need to get
the pvcreate parameters somehow to the vg_extend routine. Options
seemed to be:
1. Attach the parameters to struct volume_group. I personally
did not like this idea in most cases, though one could make an
agrument why it might be ok at least for some of the parameters
(e.g. metadatacopies).
2. Pass them in to the extend routine. This second route seemed
to be the best approach given the constraints.
Future patches will parse the command line and fill in the actual
values for the pvcreate_single call.
Should be no functional change.
Should be no functional change. If this parameter is set to NULL, just fail
the extend if the device is not already a PV. If non-NULL, try pvcreate_single
before failing. Note that pvcreate_single() handles the log_error in case
of failure so we just return 0 if pvcreate_single() fails.
Stop clvmd from automatically doing lock conversions. Now, if a lock
is granted at one mode and an attempt to convert it wthout the LCK_CONVERT
flag set then it will return errno=EBUSY.
This fixes a pretty bad bug in which an LV could be activated exclusively on
one node and lvchange -ay on another would convert it to shared!
It might break some things in other areas, but I doubt it.
Dave Wysochanski [Wed, 30 Sep 2009 16:13:53 +0000 (16:13 +0000)]
Update nightly tests to deal with unit changes.
Now uppercase letters imply Si units, so use lowercase everywhere.
We could stay with uppercase, but then we'd have to deal with rounding, etc.
Also, some output / error messages change slightly (instead of "GB" we're
now saying "GiB").
One test enhancement might be to add some new tests for the units changes
but for now let's just get the test back to passing.
Add global/si_unit_consistency to enable cleaned-up use of units in output.
Add configure --enable-units-compat to set si_unit_consistency off by default.
Use standard output units for 'PE Size' and 'Stripe size' in pv/lvdisplay.
'_emit_areas_line' returns 1 for success and 0 for failure. This always
confuses me, so I've added a comment at the top of the function to
remind me of this.
I also found that 'mirror_emit_segment_line' was returning 0 (return_0)
on failure /and/ success. It now returns 1 for success and 0 for failure -
just like '_emit_areas_line' and its calling function, '_emit_segment_line'.
Dave Wysochanski [Tue, 15 Sep 2009 18:35:13 +0000 (18:35 +0000)]
Add vg_is_resizeable() and cleanup references.
Clean up VG_RESIZEABLE flag by creating vg_is_resizeable().
Update comment - we no longer have ALLOW_RESIZEABLE.
Also use vg_is_exported() in one place missed by earlier patch.
Should be no functional change.
Dave Wysochanski [Tue, 15 Sep 2009 01:38:59 +0000 (01:38 +0000)]
Fix process_each_vg / _process_one_vg when vg_read() returns FAILED_LOCKING.
Remove the checks for vg_read_error() in most of the tools callback
functions and instead make the check in _process_one_vg() more general.
In all but vgcfgbackup, we do not want to proceed if we get any error
from vg_read(). In vgcfgbackup's case, we may proceed if the backup
is to proceed with inconsistent VGs. This is a special case though,
and we mark it with the READ_ALLOW_INCONSISTENT flag passed to
process_each_vg (and subsequently to _process_one_vg).
NOTE: More cleanup is needed in the vg_read_error() path cases.
This patch is a start.
Add lots of missing stack debug messages to tools.
Make readonly locking available as locking type 4.
Fix readonly locking to permit writeable global locks (for vgscan). (2.02.49)
Dave Wysochanski [Mon, 14 Sep 2009 19:44:15 +0000 (19:44 +0000)]
Use vg_is_exported(vg) macro everywhere.
This patch is all just cleanup and no other patch depends on it.
Replace explicit dereference and check with vg_is_exported().
Update a few copyrights and remove unnecessary whitespace.
Should be no functional change.
Dave Wysochanski [Mon, 14 Sep 2009 19:43:11 +0000 (19:43 +0000)]
Add most relevant vg_attr fields as lvm2app 'get' functions.
Of the vgs field vg_attr, a few of the most likely to be used attributes
are clustered, exported, and partial. This patch adds the following 3
functions:
uint64_t lvm_vg_is_clustered(const vg_t vg)
uint64_t lvm_vg_is_exported(const vg_t vg)
uint64_t lvm_vg_is_partial(const vg_t vg)
Peter Rajnoha [Fri, 11 Sep 2009 16:11:25 +0000 (16:11 +0000)]
Move dm_cookie_supported check into dm_udev_get_sync_supprt function.
We don't have to call dm_cookie_supported with dm_udev_get_sync_support
this way. Also, it's necessary for the current code to work properly on
systems without cookie support (older kernels).
Peter Rajnoha [Fri, 11 Sep 2009 16:05:20 +0000 (16:05 +0000)]
Several changes in udev rules:
- add DM_UDEV_RULES_VSN to provide a variable to be checked for in the other
rules (e.g. to check that DM rules are actually installed, we can alternate
functionality in the other rules based on this information, also we have
versioning support for the rules)
- set proper sbin path for dmsetup and blkid, /sbin first, then /usr/sbin.
This is necessary for anaconda to work properly.
- add 'last_rule' for cryptsetup's temporary devices (symlinks in /dev/mapper
only)
git://sourceware.org / lvm2.git / log