Add a hidden __stack_chk_fail_local alias to libc.so,
and make sure that on targets which use __stack_chk_fail,
this does not introduce a local PLT reference into libc.so.
defines __stack_chk_fail_local as an alias of __stack_chk_fail in libc.a.
There is no need to add stack_chk_fail_local.o to libc.a. We only need
to add stack_chk_fail_local.oS to libc_nonshared.a.
Tested on x86-64:
[hjl@gnu-skl-1 build-x86_64-linux]$ nm libc.a | grep __stack_chk_fail 0000000000000000 T __stack_chk_fail 0000000000000000 T __stack_chk_fail_local
[hjl@gnu-skl-1 build-x86_64-linux]$ nm libc_nonshared.a | grep __stack_chk_fail_local 0000000000000000 T __stack_chk_fail_local
[hjl@gnu-skl-1 build-x86_64-linux]$
Szabolcs Nagy [Mon, 17 Jul 2017 08:58:29 +0000 (09:58 +0100)]
[AArch64] Fix out of bound array access regression
Partially revert ea01a4da219011f4a4db97eef3c5bfc2f6e8fc6b
"aarch64: Add hwcap string routines" because _dl_procinfo cannot
be future proof and avoid oob access in _dl_hwcap_string.
The patch proposed by Peter Bergner [1] to libgcc in order to fix
[BZ #21707] adds a dependency on a symbol provided by the loader,
forcing the loader to be linked to tests after libgcc was linked.
It also requires to read the thread pointer during IRELA relocations.
Tested on powerpc, powerpc64, powerpc64le, s390x and x86_64.
Szabolcs Nagy [Wed, 12 Jul 2017 09:53:13 +0000 (10:53 +0100)]
Disable single thread optimization for open_memstream
Single thread optimization is valid if at thread creation time the
optimization can be disabled. This is in principle true for all
stream objects that user code can access (and thus needs locking),
using the same internal list as fflush(0) uses. However in glibc
open_memstream is not on that list (BZ 21735) so the optimization
has to be disabled.
As analyzed in the PR, the old code was with the assumption that assembler
won't set bit0 of thumb function address if it comes from PC-relative
instructions and the calculation can be finished during assembling. This
assumption however does not hold after PR gas/21458.
* sysdeps/arm/dl-machine.h (elf_machine_load_address): Also strip bit 0
of pcrel_address under Thumb mode.
powerpc64le: Iterate over all object suffixes when appending -mfloat128
On powerpc64le, the compilation of the files related to float128 support
requires the option -mfloat128 to be passed to gcc. However, not all
possible object suffixes were covered in the Makefile. This patch uses
$(all-object-suffixes) in all remaining rules.
Tested for powerpc64le.
* sysdeps/powerpc/powerpc64le/Makefile: Use $(all-object-suffixes)
to iterate over all possible object suffixes. Add a comment
explaining the use of sysdep-CFLAGS instead of CFLAGS.
H.J. Lu [Tue, 11 Jul 2017 14:44:01 +0000 (07:44 -0700)]
Avoid backtrace from __stack_chk_fail [BZ #12189]
__stack_chk_fail is called on corrupted stack. Stack backtrace is very
unreliable against corrupted stack. __libc_message is changed to accept
enum __libc_message_action and call BEFORE_ABORT only if action includes
do_backtrace. __fortify_fail_abort is added to avoid backtrace from
__stack_chk_fail.
[BZ #12189]
* debug/Makefile (CFLAGS-tst-ssp-1.c): New.
(tests): Add tst-ssp-1 if -fstack-protector works.
* debug/fortify_fail.c: Include <stdbool.h>.
(_fortify_fail_abort): New function.
(__fortify_fail): Call _fortify_fail_abort.
(__fortify_fail_abort): Add a hidden definition.
* debug/stack_chk_fail.c: Include <stdbool.h>.
(__stack_chk_fail): Call __fortify_fail_abort, instead of
__fortify_fail.
* debug/tst-ssp-1.c: New file.
* include/stdio.h (__libc_message_action): New enum.
(__libc_message): Replace int with enum __libc_message_action.
(__fortify_fail_abort): New hidden prototype.
* malloc/malloc.c (malloc_printerr): Update __libc_message calls.
* sysdeps/posix/libc_fatal.c (__libc_message): Replace int
with enum __libc_message_action. Call BEFORE_ABORT only if
action includes do_backtrace.
(__libc_fatal): Update __libc_message call.
Stefan Liebler [Tue, 11 Jul 2017 08:37:03 +0000 (10:37 +0200)]
S390: Fix tst-ptrace-singleblock if kernel does not support PTRACE_SINGLEBLOCK.
The request PTRACE_SINGLEBLOCK was introduced in Linux 3.15. Thus the ptrace call
will fail on older kernels.
Thus the test is now testing PTRACE_SINGLEBLOCK with data argument pointing to a
buffer on stack which is assumed to fail. If the request would be interpreted as
PTRACE_GETREGS, then the ptrace call will not fail and the regs are written to buf.
If we run with a kernel with support for PTRACE_SINGLEBLOCK a ptrace call with
data=NULL, returns zero with no error. If we run with a kernel without support for
PTRACE_SINGLEBLOCK a ptrace call with data=NULL reports an error.
In the latter case, the test is just continuing with PTRACE_CONT.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
Support running on kernels without PTRACE_SINGLEBLOCK.
During Locale verification I observed that
Incorrect Full Weekday names for ks_IN@devanagari
Reference is taken from
http://www.mkraina.com/PDF/3-Self-authored%20Works%20(English)/15.pdf
And kashmiri devanagari travel book and other sources
[BZ #21721]
* locales/ks_IN@devanagari: Full weekday name Fix.
Joseph Myers [Thu, 6 Jul 2017 17:01:03 +0000 (17:01 +0000)]
Increase some test timeouts.
This patch increases the timeouts for some tests that I've seen timing
out on slow systems in my 2.26 release testing. (In the case of
tst-tsearch.c, increasing the timeout means removing a setting of 10
that was put there before the default timeout was increased to 20
seconds, so putting the default into effect.)
* iconvdata/tst-loading.c (TIMEOUT): Define to 30.
* misc/tst-tsearch.c (TIMEOUT): Remove.
* nptl/tst-create-detached.c (TIMEOUT): Define to 100.
* nptl/tst-robust-fork.c (TIMEOUT): Likewise.
* nptl/tst-rwlock19.c (TIMEOUT): Likewise.
* string/tst-cmp.c (TIMEOUT): Define to 600.
continue to work even if vector instructions are used in glibc which
require the ABI stack realignment.
__tls_get_addr_slow is added to handle the slow paths in the default
implementation of__tls_get_addr in elf/dl-tls.c. The new __tls_get_addr
calls __tls_get_addr_slow after realigning the stack. Internal calls
within ld.so go directly to the default implementation of __tls_get_addr
because they do not need stack realignment.
Szabolcs Nagy [Tue, 4 Jul 2017 15:05:12 +0000 (16:05 +0100)]
Single threaded stdio optimization
Locking overhead can be significant in some stdio operations
that are common in single threaded applications.
This patch adds the _IO_FLAGS2_NEED_LOCK flag to indicate if
an _IO_FILE object needs to be locked and some of the stdio
functions just jump to their _unlocked variant when not. The
flag is set on all _IO_FILE objects when the first thread is
created. A new GLIBC_PRIVATE libc symbol, _IO_enable_locks,
was added to do this from libpthread.
The optimization can be applied to more stdio functions,
currently it is only applied to single flag check or single
non-wide-char standard operations. The flag should probably
be never set for files with _IO_USER_LOCK, but that's just a
further optimization, not a correctness requirement.
The optimization is valid in a single thread because stdio
operations are non-as-safe (so lock state is not observable
from a signal handler) and stdio locks are recursive (so lock
state is not observable via deadlock). The optimization is not
valid if a thread may be created while an stdio lock is taken
and thus it should be disabled if any user code may run during
an stdio operation (interposed malloc, printf hooks, etc).
This makes the optimization more complicated for some stdio
operations (e.g. printf), but those are bigger and thus less
important to optimize so this patch does not try to do that.
A dot-less host name without an /etc/resolv.conf file caused an
assertion failure in update_from_conf because the function would not
deal correctly with the empty search list case.
Thanks to Andreas Schwab for debugging assistence.
resolv: Automatically reload a changed /etc/resolv.conf file [BZ #984]
This commit enhances the stub resolver to reload the configuration
in the per-thread _res object if the /etc/resolv.conf file has
changed. The resolver checks whether the application has modified
_res and will not overwrite the _res object in that case.
The struct resolv_context mechanism is used to check the
configuration file only once per name lookup.
Florian Weimer [Fri, 30 Jun 2017 18:19:10 +0000 (20:19 +0200)]
resolv: Mirror the entire resolver configuration in struct resolv_conf
This commit adds the remaining unchanging members (which are loaded
from /etc/resolv.conf) to struct resolv_conf.
The extended name server list is currently not used by the stub
resolver. The switch depends on a cleanup: The _u._ext.nssocks
array stores just a single socket, and needs to be replaced with
a single socket value.
(The compatibility gethostname implementation does not use the
extended addres sort list, either. Updating the compat code is
not worthwhile.)
Florian Weimer [Fri, 30 Jun 2017 22:53:05 +0000 (00:53 +0200)]
resolv: Lift domain search list limits [BZ #19569] [BZ #21475]
This change uses the extended resolver state in struct resolv_conf to
store the search list. If applications have not patched the _res
object directly, this extended search list will be used by the stub
resolver during name resolution.