Jim Meyering [Sun, 13 Jul 2014 00:07:21 +0000 (17:07 -0700)]
regex: don't deref NULL upon heap allocation failure
* posix/regcomp.c: (parse_dup_op): Handle duplicate_tree
failure in one more place.
To trigger the segfault, configure grep -with-included-regex,
build it, and run these commands:
( ulimit -v 300000; echo a|src/grep -E a+++++++++++++++++++++ )
We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
Commit 887865f remove the lll_robust_trylock definition on all
architectures, however for powerpc both __lll_trylock and
__lll_cond_trylock were based on lll_robust_trylock definition.
This patch restore it with a different name.
- Use of !_LIBC instead of HAVE_CONFIG_H
- Code changes in [!_LIBC] that don't affect us
- Minor formatting changes
- Use __builtin_expect in shared code
- Define some macros in [_LIBC] that are used in gnulib but never
defined in glibc
- Flip macro check for STRERROR_R_CHAR_P so that it does not throw a
warning
Fix crash when system has no ipv6 address [BZ #17125]
Here's an updated patch to fix the crash in bug-ga2 when the system
has no configured ipv6 address. I have taken a different approach of
using libc_freeres_fn instead of the libc_freeres_ptr since the former
gives better control over what is freed; we need that since cache may
or may not be allocated using malloc.
Verified that bug-ga2 works correctly in both cases and does not have
memory leaks in either of them.
Will Newton [Mon, 7 Jul 2014 14:14:26 +0000 (15:14 +0100)]
Fix -Wundef warnings for SHARED
The definition of SHARED is tested with #ifdef pretty much everywhere
apart from these few places. The tlsdesc.c code seems to be copy and
pasted to a few architectures and there is one instance in the hppa
startup code.
While we're at fixing build warnings, here's one unnecessary warning
that can be fixed fairly easily. The SIZE variable is never actually
use uninitialized, but the compiler cannot make that out and thinks
(correctly) that there is a potential for accessing SIZE without
initializing it. Make this safe by initializing SIZE to 0.
There was a typo in the previous patch due to which resplen2 was
checked for non-zero instead of the value at resplen2. Fix that and
improve the condition by checking resplen2 for non-NULL (instead of
answerp2) and also adding the check in a third place.
Now that MEMCPY_OK_FOR_FWD_MEMMOVE should be define on memcopy.h there
is no need to specialized powerpc memmove implementation. This patch
moves the define set to powerpc memcopy and cleanup its definition on
powerpc code.
PowerPC: Align power7 memcpy using VSX to quadword
This patch changes power7 memcpy to use VSX instructions only when
memory is aligned to quardword. It is to avoid unaligned kernel traps
on non-cacheable memory (for instance, memory-mapped I/O).
This patch adds an optimized memmove optimization for POWER7/powerpc64.
Basically the idea is to use the memcpy for POWER7 on non-overlapped
memory regions and a optimized backward memcpy for memory regions
that overlap (similar to the idea of string/memmove.c).
The backward memcpy algorithm used is similar the one use for memcpy for
POWER7, with adjustments done for alignment. The difference is memory
is always aligned to 16 bytes before using VSX/altivec instructions.
This patch removes the powerpc specific logic in memmove and instead
include default implementation with MEMCPY_OK_FOR_FWD_MEMMOVE defined.
This lead in a increase performance, since the constraints to use
memcpy in powerpc code are too restrictive and memcpy can be used for
any forward memmove.
Will Newton [Thu, 26 Jun 2014 15:00:44 +0000 (16:00 +0100)]
string/memchr.c: Merge from gnulib
Merge most of the gnulib implementation of memchr. The changes that
remain are:
- copyright header
- bp-sym.h removed
- reg_char removed
- allow MEMCHR to be redefined
- non-conforming whitespace changes
The merged code fixes a number of -Wundef warnings and also introduces
an optimized algorithm. I haven't detected any performance difference
in the new code which I believe is down to the quite specific
circumstances required to hit it. However the new code is approximately
half the size of the old code on AArch64 (which uses generic memchr).
ChangeLog:
2014-07-04 Will Newton <will.newton@linaro.org>
* string/memchr.c: Merge from gnulib.
[_LIBC]: Remove conditionals.
(__ptr_t): Remove define.
(LONG_MAX_32_BITS): Likewise.
(LONG_MAX): Likewise.
(MEMCHR): Use ANSI prototype and optimize algorithm.
alpha: Remove nearbyint and nearbyintf implementations
The original implementation was written for EV5, which does not
record inexact in the status register for /SU (but no /I) insns.
But EV6 does record the inexact status; the lack of /I simply
means that the exception is suppressed.
Adding feholdexcept becomes the bulk of the overhead, so we might
as well use the default implementation.
Two bugs in these implementations: First is that the add of 0.5
was not done in chopped rounding mode (easily fixable). Second
is that the method generates incorrect inexact exceptions for
small integral values (not easily fixable).
This test case is very, especially on targets using soft-float or QEMU
(where soft-float is used internally), and appears to be the only such
outlier. Therefore rather than requiring to have TIMEOUTFACTOR set
large enough globally, bump up the local scaling factor instead.
* stdlib/tst-strtod-overflow.c (TIMEOUT): Bump up to 30.
c4c4124473c187b5c4642611390897666c3d3970 added the _Noreturn macro for
pre-C11 compilers, but it now throws a new Wundef warning during `make
check` for __STDC_VERSION__ which gcc does not define by default. The
following patch fixes this in line with other uses of __STDC_VERSION__
in the file.
The PAGE_COPY_THRESHOLD macro is meant to be overridden by
architecture-specific pagecopy.h, but it is currently done only by
mach; all other architectures use the default. Check to see if the
macro is defined in addition to whether it is set to a non-zero value.
This patch adds an ifunc power7 strcat symbol that uses the logic on
sysdeps/powerpc/strcat.c but call power7 strlen/strcpy symbols instead
of default ones.
Will Newton [Mon, 23 Jun 2014 15:53:30 +0000 (16:53 +0100)]
malloc/obstack: Merge from gnulib
Merge the latest version of the obstack.c and obstack.h files
from gnulib. The majority of this change is coding style and
cosmetic comment changes but it also fixes a -Wundef warning
in the build as a side effect.
2014-07-02 Will Newton <will.newton@linaro.org>
* malloc/obstack.c: Merge from gnulib master.
[HAVE_CONFIG_H]: Remove conditional code.
[!_LIBC]: Include config.h.
[!ELIDE_CODE]: Don't include inttypes.h, include
stdint.h unconditionally.
(print_and_abort): Mark as _Noreturn.
(_obstack_allocated_p): Mark as __attribute_pure__.
(obstack_free): Rename to __obstack_free.
[!__attribute__]: Remove conditional code.
* malloc/obstack.h: Merge from gnulib master.
[__cplusplus]: Move conditional down.
[!__attribute_pure__]: Define __attribute_pure__ here
if it is not already defined.
(_obstack_memory_used): Mark as __attribute_pure__.
[!__obstack_free]: Define as obstack_free.
[__GNUC__]: Remove check for ancient NeXT gcc.
Carlos O'Donell [Wed, 2 Jul 2014 07:11:53 +0000 (03:11 -0400)]
hppa: Remove GLIBC_2.3 from librt.abilist.
This commit removes the aio_cancel and aio_cancel64 symbols at
GLIBC_2.3 from the ABI baseline. The ABI baseline is now complete
for hppa and considered stable.
Carlos O'Donell [Wed, 2 Jul 2014 03:52:09 +0000 (23:52 -0400)]
hppa: Add ABI baselines.
The following ABI baselines were tested against several old releases
of debian and gentoo. Several problems were discovered and fixed as
part of developing the ABI baselines.
Firstly, libBrokenLocale on gentoo exports __ctype_get_mb_cur_max
as @@GLIBC_2.0, but it should be @@GLIBC_2.2 since that's the minimum
version defined in shlib-versions for hppa. I don't know when this
broke, but master properly parses hppa's shlib-versions which clearly
lists libBrokenLocale as defaulting to GLIBC_2.2. Therefore I'm
accepting GLBIC_2.2 as the correct version for this symbol and setting
the baseline to that, despite the fact that the present distribution
is wrong. I don't expect that any new applications should be using
libBrokenLocale, so it should match the oldest behaviour which is to
export a GLIBC_2.2 symbol. For example in debian's 2.7 has it at
version GLIBC_2.2.
Secondly, aio_cancel and aio_cancel64 previously had a compat symbol
at version @GLIBC_2.1 with a new symbol at @@GLIBC_2.3[1]. During the
Linuxthreads to NPTL transition the file aio_cancel.c was lost for hppa
and that resulted in just @@GLIBC_2.1 versions of these symbols being
exported. The @@GLIBC_2.1 version works correctly and uses the right
value of ECANCELLED. Therefore if I were to fix this today it might
break correctly working applications using aio_cancel*@GLIBC_2.1 by
causing those to use the old aio_cancel that used the older value
of ECANCELLED. Thus the best option is to accept that the ABI changed
and ignore older applications in favour of newer applications. The
best thing to do is cleanup the version files (included in the patch).
The rest of the ABI was as expected (ignoring __p_type_syms size
change in 2008).
The code in gethnamaddr.c for gethostbyaddr used and set this macro to
allow multiple PTR records to be added as aliases. This was useful
for gethostbyaddr since it returns a hostent structure, which can
return aliases.
The gethnamaddr.c source however is unused in glibc since pretty much
forever. Instead, the DNS lookup bits for gethostbyaddr (as well as
getnameinfo) are implemented in dns-hosts.c and in that implementation
all but one (the first one) of the multiple PTR records are ignored.
Since gethnamaddr.c is essentially dead code, ignore that
implementation and replace the MULTI_PTRS_ARE_ALIASES bit with a
comment mentioning that bind adds PTR records as aliases while we
don't.
Joseph Myers [Tue, 1 Jul 2014 01:57:46 +0000 (11:57 +1000)]
MicroBlaze: Update kernel-features.h for syscalls added in 3.15
Now that the MicroBlaze 3.15 kernel has the pselect6, preadv and
pwritev syscalls, this patch updates kernel-features.h so they are
assumed to be present for 3.15 and later kernels.
2014-06-17 Joseph Myers <joseph@codesourcery.com>
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x030f00] (__ASSUME_PSELECT): Do not
undefine.
[__LINUX_KERNEL_VERSION >= 0x030f00] (__ASSUME_PREADV): Likewise.
[__LINUX_KERNEL_VERSION >= 0x030f00] (__ASSUME_PWRITEV): Likewise.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Joseph Myers [Mon, 30 Jun 2014 21:20:35 +0000 (21:20 +0000)]
Regenerate ARM libm-test-ulps.
This patch regenerates libm-test-ulps for ARM. As before it may be
useful for someone building for a configuration with VFMA enabled to
do a followup regeneration for any additional ulps in that
configuration.
This makes sure any subprocesses created by the program being tested get
killed as well if their parent times out. Otherwise if they are really
stuck, they may remain there running forever after the test case and
then the whole test suite has completed, until killed by hand.
* test-skeleton.c (signal_handler): Kill the whole process group
before killing the child individually.
(main): Report any failure on `setpgid'.
This patch fixes spurious underflows from ldbl-128 expm1l, as reported
in <https://sourceware.org/ml/libc-alpha/2014-06/msg00835.html> and
exposed by the tests added for such a bug in the x86 / x86-64
version. The bug and fix are essentially the same, so no separate bug
is filed in Bugzilla.
Tested for mips64.
[BZ #16539]
* sysdeps/ieee754/ldbl-128/s_expm1l.c: Include <float.h>.
(__expm1l): Return argument unchanged when small but not
subnormal.
Joseph Myers [Mon, 30 Jun 2014 17:37:10 +0000 (17:37 +0000)]
Rename soft-fp op-[1248].h variables to avoid risk of shadowing.
Continuing the soft-fp variable renaming from
<https://sourceware.org/ml/libc-alpha/2014-06/msg00434.html> to avoid
shadowing if two macros happen to use the same variable name and that
variable is involved in an argument one of those macros passes to
another, this patch renames variables in op-[1248].h. (The two
patches are to different files and are independent of each other.)
Tested for powerpc32 (soft-float) and mips64 that this makes no change
to the disassembly of installed shared libraries.
Joseph Myers [Mon, 30 Jun 2014 17:36:18 +0000 (17:36 +0000)]
Rename soft-fp extended.h, op-common.h variables to avoid risk of shadowing.
In <https://sourceware.org/ml/libc-alpha/2013-06/msg00851.html>, I
fixed a bug caused by multiple soft-fp macros using the same variable
names, resulting in shadowing when one macro called another that used
the same variable name, with an argument involving the variable in the
outer macro. The fix was to rename the local variables so their names
included the containing macro name, to ensure uniqueness.
I noted then that this would make sense more systematically for all
variables in any soft-fp macro. Since then, I've used such variable
names in new soft-fp macros. This patch now converts existing macros
in extended.h and op-common.h to use this convention. (op-[1248].h
are intended to be converted separately.)
(Name conflicts could arise for label names as well, but because those
are function-scope in C any such conflict will give an immediate
compile error rather than a subtle bug, so there's no need for
preemptive renaming in that case.)
Tested for powerpc32 (soft-float) and mips64 that this makes no change
to the disassembly of installed shared libraries.
Joseph Myers [Sun, 29 Jun 2014 11:49:08 +0000 (11:49 +0000)]
Fix ldbl-128 powl sign of result in overflow / underflow cases (bug 17097).
This patch fixes bug 17097, ldbl-128 powl producing overflowing /
underflowing results with positive sign when the result should have
been negative. This was shown up by the tests in non-default rounding
modes added by my patch for bug 16315, but isn't actually limited to
non-default rounding modes: rather, when rounding to nearest the
wrappers produced a result with the correct sign and so always hid the
bug unless -lieee was used to disable the wrappers. The problem is
that in the cases where Y is large enough that the result overflows or
underflows for X not very close to 1, but not large enough to overflow
or underflow for all X != +/- 1 (in the latter case Y is always an
even integer), a positive overflowing / underflowing result is always
returned, rather than one with the correct sign. This patch moves the
relevant part of computation of the sign earlier and returns a result
of the correct sign.
Tested for mips64.
[BZ #17097]
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Return
result with correct sign in case of exponents that produce
overflow except for X very close to 1.
* lib/mktime.c: Use "#if defined DEBUG && DEBUG", not "#if DEBUG",
as that works with both Glibc's and Gnulib's style.
See thread starting at Siddhesh Poyarekar's bug report at:
http://lists.gnu.org/archive/html/bug-gnulib/2014-06/msg00102.html
git://sourceware.org / glibc.git / log