DJ Delorie [Fri, 3 Aug 2018 17:52:01 +0000 (13:52 -0400)]
Regen RISC-V rvd ULPs
* sysdeps/riscv/rv64/rvd/libm-test-ulps: Update.
Note: I regen'd these from scratch, but I'm only committing the
increases, as I only tested on hardware. There were a few 2->1
decreases that I omitted, possibly "for now".
Joseph Myers [Fri, 3 Aug 2018 16:56:02 +0000 (16:56 +0000)]
Consistently terminate libm-test-*.inc TEST lines with commas.
Some TEST_* lines in libm-test-*.inc end with semicolons not commas.
This works at present because gen-libm-test.pl ignores whatever comes
after the TEST_* call, but is logically wrong (since the TEST_* calls
generate array elements, not statements) and the Python replacement
for gen-libm-test.pl that I'm working on is stricter about the syntax
here. This patch fixes the lines in question to use commas like most
such lines already do.
Tested for x86_64.
* math/libm-test-ilogb.inc (ilogb_test_data): Use ',' not ';'
after TEST_* calls.
* math/libm-test-llogb.inc (llogb_test_data): Likewise.
* math/libm-test-logb.inc (logb_test_data): Likewise.
Wilco Dijkstra [Fri, 3 Aug 2018 16:24:12 +0000 (17:24 +0100)]
Simplify and speedup strstr/strcasestr first match
Looking at the benchtests, both strstr and strcasestr spend a lot of time
in a slow initialization loop handling one character per iteration.
This can be simplified and use the much faster strlen/strnlen/strchr/memcmp.
Read ahead a few cachelines to reduce the number of strnlen calls, which
improves performance by ~3-4%. This patch improves the time taken for the
full strstr benchtest by >40%.
* string/strcasestr.c (STRCASESTR): Simplify and speedup first match.
* string/strstr.c (AVAILABLE): Likewise.
H.J. Lu [Fri, 3 Aug 2018 15:04:49 +0000 (08:04 -0700)]
x86: Don't include <init-arch.h> in assembly codes
There is no need to include <init-arch.h> in assembly codes since all
x86 IFUNC selector functions are written in C. Tested on i686 and
x86-64. There is no code change in libc.so, ld.so and libmvec.so.
Carlos O'Donell [Thu, 26 Jul 2018 14:14:55 +0000 (10:14 -0400)]
Add convenience target 'install-locale-files'.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.
You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
Joseph Myers [Thu, 2 Aug 2018 15:53:29 +0000 (15:53 +0000)]
Do not define various fenv.h macros for MIPS soft-float (bug 23479).
MIPS soft-float glibc does not support floating-point exceptions and
rounding modes, and uses a different ABI from hard-float so a
soft-float compilation cannot use a glibc that does support
floating-point exceptions and rounding modes. Thus, bits/fenv.h
should not, when compiling for soft-float, define macros for the
unsupported features.
This patch changes it accordingly to define those macros only for
hard-float. None of the exception macros are defined for soft-float,
with FE_ALL_EXCEPT defined to 0 in that case, and only FE_TONEAREST is
defined of the rounding-mode macros, and FE_NOMASK_ENV is not defined;
this is consistent with how architectures lacking exception and
rounding mode support generally define things in this header. As well
as making the header more correct for this case, this also means the
generic math_private.h optimizations for this case automatically apply
(inlining libm-internal fenv.h function calls that are trivial when
exceptions and rounding modes are not supported).
The mips64 sfp-machine.h then needs similar changes to disable more of
the exception and rounding mode handling for soft-float. (The mips32
sfp-machine.h is already used only for soft-float, has no integration
with hardware exceptions or rounding modes and so needs no changes.)
Existing binaries might use the old FE_NOMASK_ENV value as an argument
to fesetenv / feupdateenv and expect an error for it (given that it
was defined in a header that also defined FE_ALL_EXCEPT to a nonzero
value). To preserve that error, wrappers for the fallback fesetenv
and feupdateenv are created in sysdeps/mips/nofpu/.
Tested for mips64 (hard-float and soft-float, all three ABIs).
[BZ #23479]
* sysdeps/mips/bits/fenv.h (FE_INEXACT): Define only if
[__mips_hard_float].
(FE_UNDERFLOW): Likewise.
(FE_OVERFLOW): Likewise.
(FE_DIVBYZERO): Likewise.
(FE_INVALID): Likewise.
(FE_ALL_EXCEPT): Define to 0 if [!__mips_hard_float].
(FE_TOWARDZERO): Define only if [__mips_hard_float].
(FE_UPWARD): Likewise.
(FE_DOWNWARD): Likewise.
(__FE_UNDEFINED): Define if [!__mips_hard_float]
(FE_NOMASK_ENV): Define only if [__mips_hard_float].
* sysdeps/mips/mips64/sfp-machine.h (_FP_DECL_EX): Define only if
[__mips_hard_float].
(FP_ROUNDMODE): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
* sysdeps/mips/nofpu/fesetenv.c: New file.
* sysdeps/mips/nofpu/feupdateenv.c: Likewise.
Joseph Myers [Wed, 1 Aug 2018 22:22:00 +0000 (22:22 +0000)]
Fix math/test-misc.c for undefined fenv.h macros.
math/test-misc.c contains some code that uses fenv.h macros
FE_UNDERFLOW, FE_OVERFLOW and FE_UPWARD without being conditional on
those macros being defined.
That would normally break the build for configurations (typically
soft-float) not defining those macros. However, the code in question
is inside LDBL_MANT_DIG > DBL_MANT_DIG conditionals. And, while we
have configurations lacking rounding mode and exception support where
LDBL_MANT_DIG > DBL_MANT_DIG (soft-float MIPS64 and RISC-V), those
configurations currently define the fenv.h macros in question even for
soft-float.
There may be some case for defining those macros in cases where a
soft-float compilation could use a hard-float libm (where both
soft-float and hard-float can use the same ABI, as on ARM and RISC-V,
for example). But MIPS is not such a case - the hard-float and
soft-float ABIs are incompatible - and thus I am testing a patch to
stop defining those macros for soft-float MIPS (motivated by reducing
the extent to which architectures need their own definitions of
math-tests.h macros - if lack of rounding mode / exception support can
be determined by the lack of macros in fenv.h, that avoids the need
for math-tests.h to declare that lack as well). Introducing a case of
LDBL_MANT_DIG > DBL_MANT_DIG without these macros defined shows up the
problem with math/test-misc.c. This patch then fixes that problem by
adding appropriate conditionals.
Tested for MIPS64 in conjunction with changes to stop defining the
macros in question in bits/fenv.h for soft-float.
* math/test-misc.c (do_test) [LDBL_MANT_DIG > DBL_MANT_DIG]: Make
code using FE_UNDERFLOW conditional on [FE_UNDERFLOW], code using
FE_OVERFLOW conditional on [FE_OVERFLOW] and code using FE_UPWARD
conditional on [FE_UPWARD].
Paul Eggert [Wed, 1 Aug 2018 20:22:16 +0000 (13:22 -0700)]
regex: fix memory leak in Gnulib
Problem and fix reported by Assaf Gordon in:
https://lists.gnu.org/r/bug-gnulib/2018-07/txtqLKNwBdefE.txt
* posix/regcomp.c (free_charset) [!_LIBC]: Free range_starts and
range_ends members too, as they are defined in 'struct
re_charset_t' even if not _LIBC. This affects only Gnulib.
Joseph Myers [Wed, 1 Aug 2018 11:21:16 +0000 (11:21 +0000)]
Move SNAN_TESTS_PRESERVE_PAYLOAD out of math-tests.h.
Continuing moving macros out of math-tests.h to smaller headers
following typo-proof conventions instead of using #ifndef, this patch
moves SNAN_TESTS_PRESERVE_PAYLOAD out to its own sysdeps header.
Tested with build-many-glibcs.py.
* sysdeps/generic/math-tests-snan-payload.h: New file.
* sysdeps/hppa/math-tests-snan-payload.h: Likewise.
* sysdeps/mips/math-tests-snan-payload.h: Likewise.
* sysdeps/riscv/math-tests-snan-payload.h: Likewise.
* sysdeps/generic/math-tests.h: Include
<math-tests-snan-payload.h>.
(SNAN_TESTS_PRESERVE_PAYLOAD): Do not define macro here.
* sysdeps/hppa/math-tests.h: Remove file.
* sysdeps/mips/math-tests.h [!__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Do not define macro here.
* sysdeps/riscv/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD):
Likewise.
Joseph Myers [Wed, 1 Aug 2018 11:18:57 +0000 (11:18 +0000)]
Move SNAN_TESTS_TYPE_CAST out of math-tests.h.
The math-tests.h header has many different macros and groups of
macros, defined using #ifndef in the generic version which is included
by architecture versions with #include_next after possibly defining
non-default versions of some of those macros.
This use of #ifndef is contrary to our normal typo-proof conventions
for macro definitions. This patch moves one of the macros,
SNAN_TESTS_TYPE_CAST, out to its own sysdeps header, to follow those
typo-proof conventions more closely.
Tested with build-many-glibcs.py.
2018-08-01 Joseph Myers <joseph@codesourcery.com>
* sysdeps/generic/math-tests-snan-cast.h: New file.
* sysdeps/powerpc/math-tests-snan-cast.h: Likewise.
* sysdeps/generic/math-tests.h: Include <math-tests-snan-cast.h>.
(SNAN_TESTS_TYPE_CAST): Do not define macro here.
* sysdeps/powerpc/math-tests.h (SNAN_TESTS_TYPE_CAST): Likewise.
H.J. Lu [Mon, 30 Jul 2018 23:14:46 +0000 (16:14 -0700)]
x86/CET: Fix property note parser [BZ #23467]
GNU_PROPERTY_X86_FEATURE_1_AND may not be the first property item. We
need to check each property item until we reach the end of the property
or find GNU_PROPERTY_X86_FEATURE_1_AND.
This patch adds 2 tests. The first test checks if IBT is enabled and
the second test reads the output from the first test to check if IBT
is is enabled. The second second test fails if IBT isn't enabled
properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23467]
* sysdeps/unix/sysv/linux/x86/Makefile (tests): Add
tst-cet-property-1 and tst-cet-property-2 if CET is enabled.
(CFLAGS-tst-cet-property-1.o): New.
(ASFLAGS-tst-cet-property-dep-2.o): Likewise.
($(objpfx)tst-cet-property-2): Likewise.
($(objpfx)tst-cet-property-2.out): Likewise.
* sysdeps/unix/sysv/linux/x86/tst-cet-property-1.c: New file.
* sysdeps/unix/sysv/linux/x86/tst-cet-property-2.c: Likewise.
* sysdeps/unix/sysv/linux/x86/tst-cet-property-dep-2.S: Likewise.
* sysdeps/x86/dl-prop.h (_dl_process_cet_property_note): Parse
each property item until GNU_PROPERTY_X86_FEATURE_1_AND is found.
NEWS: Avoid the words "nominative" and "genitive".
Glibc supports two grammatical forms of month names and we keep adding
the locale data which actually use this feature but those two forms are
not necessarily nominative and genitive. It is better to use a more
generic term.
This patch make the OFD tests return unsupported if kernel does not
support OFD locks (it was added on 3.15).
Checked on a ia64-linux-gnu with Linux 3.14.
* sysdeps/unix/sysv/linux/tst-ofdlocks.c: Return unsupported if
kernel does not support OFD locks.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
Samuel Thibault [Fri, 27 Jul 2018 09:18:29 +0000 (11:18 +0200)]
hurd: Fix some ld.so symbol override from libc
ld.so symbols to be overriden by libc need to be extern to really get
overriden.
More fixes are needed to avoid the hidden attribute.
* sysdeps/mach/hurd/Versions (libc): Make __access and
__access_noerrno external so they can override the ld symbols.
(ld): Make __access, __read, __sbrk, __strtoul_internal, __write,
__writev, __open64, __access_noerrno extern so they can be overrided.
* sysdeps/mach/hurd/i386/libc.abilist: Update accordingly.
* sysdeps/mach/hurd/i386/ld.abilist: Update accordingly.
Stefan Liebler [Thu, 26 Jul 2018 15:09:44 +0000 (17:09 +0200)]
Fix string/tst-xbzero-opt if build with gcc head.
On s390x, the test string/tst-xbzero-opt is failing if build with gcc head:
FAIL: no clear/prepare: expected 32 got 0
FAIL: no clear/test: expected some got 0
FAIL: ordinary clear/prepare: expected 32 got 0
INFO: ordinary clear/test: found 0 patterns (memset not eliminated)
PASS: explicit clear/prepare: expected 32 got 32
PASS: explicit clear/test: expected 0 got 0
In setup_no_clear / setup_ordinary_clear, GCC is omitting the memcpy loop
in prepare_test_buffer. Thus count_test_patterns does not find any of the
test_pattern.
This patch calls use_test_buffer in order to force the compiler to really copy
the pattern to buf.
ChangeLog:
* string/tst-xbzero-opt.c (use_test_buffer): New function.
(prepare_test_buffer): Call use_test_buffer as compiler barrier.
Carlos O'Donell [Wed, 25 Jul 2018 21:00:45 +0000 (17:00 -0400)]
Keep expected behaviour for [a-z] and [A-z] (Bug 23393).
In commit 9479b6d5e08eacce06c6ab60abc9b2f4eb8b71e4 we updated all of
the collation data to harmonize with the new version of ISO 14651
which is derived from Unicode 9.0.0. This collation update brought
with it some changes to locales which were not desirable by some
users, in particular it altered the meaning of the
locale-dependent-range regular expression, namely [a-z] and [A-Z], and
for en_US it caused uppercase letters to be matched by [a-z] for the
first time. The matching of uppercase letters by [a-z] is something
which is already known to users of other locales which have this
property, but this change could cause significant problems to en_US
and other similar locales that had never had this change before.
Whether this behaviour is desirable or not is contentious and GNU Awk
has this to say on the topic:
https://www.gnu.org/software/gawk/manual/html_node/Ranges-and-Locales.html
While the POSIX standard also has this further to say: "RE Bracket
Expression":
http://pubs.opengroup.org/onlinepubs/9699919799/xrat/V4_xbd_chap09.html
"The current standard leaves unspecified the behavior of a range
expression outside the POSIX locale. ... As noted above, efforts were
made to resolve the differences, but no solution has been found that
would be specific enough to allow for portable software while not
invalidating existing implementations."
In glibc we implement the requirement of ISO POSIX-2:1993 and use
collation element order (CEO) to construct the range expression, the
API internally is __collseq_table_lookup(). The fact that we use CEO
and also have 4-level weights on each collation rule means that we can
in practice reorder the collation rules in iso14651_t1_common (the new
data) to provide consistent range expression resolution *and* the
weights should maintain the expected total order. Therefore this
patch does three things:
* Reorder the collation rules for the LATIN script in
iso14651_t1_common to deinterlace uppercase and lowercase letters in
the collation element orders.
* Adds new test data en_US.UTF-8.in for sort-test.sh which exercises
strcoll* and strxfrm* and ensures the ISO 14651 collation remains.
* Add back tests to tst-fnmatch.input and tst-regexloc.c which
exercise that [a-z] does not match A or Z.
The reordering of the ISO 14651 data is done in an entirely mechanical
fashion using the following program attached to the bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=23393#c28
It is up for discussion if the iso14651_t1_common data should be
refined further to have 3 very tight collation element ranges that
include only a-z, A-Z, and 0-9, which would implement the solution
sought after in:
https://sourceware.org/bugzilla/show_bug.cgi?id=23393#c12
and implemented here:
https://www.sourceware.org/ml/libc-alpha/2018-07/msg00854.html
No regressions on x86_64.
Verified that removal of the iso14651_t1_common change causes tst-fnmatch
to regress with:
422: fnmatch ("[a-z]", "A", 0) = 0 (FAIL, expected FNM_NOMATCH) ***
...
425: fnmatch ("[A-Z]", "z", 0) = 0 (FAIL, expected FNM_NOMATCH) ***
Fix ISO C threads installed header and HURD assumption
Set installed NPTL header as the expected one (instead of an
internal one for glibc testsuite) and add a hurd specific
stdc-predef with __STDC_NO_THREADS__.
Checked on both i686-linux-gnu and i686-gnu that both threads.h
and stdc-predef.h are the expected ones.
* nptl/threads.h: Move to ...
* sysdeps/nptl/threads.h: ... here.
* sysdeps/hurd/stdc-predef.h: New file.
H.J. Lu [Wed, 25 Jul 2018 15:40:39 +0000 (08:40 -0700)]
x86/CET: Add a setcontext test for CET
Verify that setcontext works with gaps above and below the newly
allocated shadow stack.
* sysdeps/unix/sysv/linux/x86/Makefile (tests): Add
tst-cet-setcontext-1 if CET is enabled.
(CFLAGS-tst-cet-setcontext-1.c): Add -mshstk.
* sysdeps/unix/sysv/linux/x86/tst-cet-setcontext-1.c: New file.
It is expected due missing HTL ISO C threads support and both conformance
.out files indicates the reason ("#error "HTL does not implement ISO C
threads").
Checked on i686-linux-gnu and i686-gnu.
* include/threads.h: Move to ...
* sysdeps/nptl/threads.h: ... here.
* sysdeps/htl/threads.h: New file.
* conform/Makefile (linknamespace-libs-ISO11): Use
static-thread-library instead of linking libpthread.
(linknamespace-libs-XPG4): Revert wrong libcrypt.a addition.
H.J. Lu [Wed, 25 Jul 2018 13:37:14 +0000 (06:37 -0700)]
x86-64/CET: Extend ucontext_t to save shadow stack
This patch adds a field to ucontext_t to save shadow stack:
1. getcontext and swapcontext are updated to save the caller's shadow
stack pointer and return addresses.
2. setcontext and swapcontext are updated to restore shadow stack and
jump to new context directly.
3. makecontext is updated to allocate a new shadow stack and set the
caller's return address to __start_context.
Since makecontext allocates a new shadow stack when making a new
context and kernel allocates a new shadow stack for clone/fork/vfork
syscalls, we track the current shadow stack base. In setcontext and
swapcontext, if the target shadow stack base is the same as the current
shadow stack base, we unwind the shadow stack. Otherwise it is a stack
switch and we look for a restore token.
We enable shadow stack at run-time only if program and all used shared
objects, including dlopened ones, are shadow stack enabled, which means
that they must be compiled with GCC 8 or above and glibc 2.28 or above.
We need to save and restore shadow stack only if shadow stack is enabled.
When caller of getcontext, setcontext, swapcontext and makecontext is
compiled with smaller ucontext_t, shadow stack won't be enabled at
run-time. We check if shadow stack is enabled before accessing the
extended field in ucontext_t.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (ucontext_t): Add
__ssp.
* sysdeps/unix/sysv/linux/x86_64/__start_context.S: Include
<asm/prctl.h> and "ucontext_i.h" when shadow stack is enabled.
(__push___start_context): New.
* sysdeps/unix/sysv/linux/x86_64/getcontext.S: Include
<asm/prctl.h>.
(__getcontext): Record the current shadow stack base. Save the
caller's shadow stack pointer and base.
* sysdeps/unix/sysv/linux/x86_64/makecontext.c: Include
<pthread.h>, <libc-pointer-arith.h> and <sys/prctl.h>.
(__push___start_context): New prototype.
(__makecontext): Call __push___start_context to allocate a new
shadow stack, push __start_context onto the new stack as well
as the new shadow stack.
* sysdeps/unix/sysv/linux/x86_64/setcontext.S: Include
<asm/prctl.h>.
(__setcontext): Restore the target shadow stack.
* sysdeps/unix/sysv/linux/x86_64/swapcontext.S: Include
<asm/prctl.h>.
(__swapcontext): Record the current shadow stack base. Save
the caller's shadow stack pointer and base. Restore the target
shadow stack.
* sysdeps/unix/sysv/linux/x86_64/sysdep.h
(STACK_SIZE_TO_SHADOW_STACK_SIZE_SHIFT): New.
* sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym (oSSP): New.
H.J. Lu [Wed, 25 Jul 2018 11:46:53 +0000 (04:46 -0700)]
x86/CET: Add tests with legacy non-CET shared objects
Check binary compatibility of CET-enabled executables:
1. When CET-enabled executable is used with legacy non-CET shared object
at run-time, ld.so should disable SHSTK and put legacy non-CET shared
objects in legacy bitmap.
2. When IBT-enabled executable dlopens legacy non-CET shared object,
ld.so should put legacy shared object in legacy bitmap.
3. Use GLIBC_TUNABLES=glibc.tune.x86_shstk=[on|off|permissive] to
control how SHSTK is enabled.
H.J. Lu [Wed, 25 Jul 2018 11:39:26 +0000 (04:39 -0700)]
x86: Rename __glibc_reserved2 to ssp_base in tcbhead_t
This will be used to record the current shadow stack base for shadow
stack switching by getcontext, makecontext, setcontext and swapcontext.
If the target shadow stack base is the same as the current shadow stack
base, we unwind the shadow stack. Otherwise it is a stack switch and
we look for a restore token to restore the target shadow stack.
H.J. Lu [Tue, 24 Jul 2018 19:23:03 +0000 (12:23 -0700)]
x86/CET: Extend arch_prctl syscall for CET control
CET arch_prctl bits should be defined in <asm/prctl.h> from Linux kernel
header files. Add x86 <include/asm/prctl.h> for pre-CET kernel header
files.
Note: sysdeps/unix/sysv/linux/x86/include/asm/prctl.h should be removed
if <asm/prctl.h> from the required kernel header files contains CET
arch_prctl bits.
/* CET features:
IBT: GNU_PROPERTY_X86_FEATURE_1_IBT
SHSTK: GNU_PROPERTY_X86_FEATURE_1_SHSTK
*/
/* Return CET features in unsigned long long *addr:
features: addr[0].
shadow stack base address: addr[1].
shadow stack size: addr[2].
*/
# define ARCH_CET_STATUS 0x3001
/* Disable CET features in unsigned int features. */
# define ARCH_CET_DISABLE 0x3002
/* Lock all CET features. */
# define ARCH_CET_LOCK 0x3003
/* Allocate a new shadow stack with unsigned long long *addr:
IN: requested shadow stack size: *addr.
OUT: allocated shadow stack address: *addr.
*/
# define ARCH_CET_ALLOC_SHSTK 0x3004
/* Return legacy region bitmap info in unsigned long long *addr:
address: addr[0].
size: addr[1].
*/
# define ARCH_CET_LEGACY_BITMAP 0x3005
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/x86/include/asm/prctl.h: New file.
* sysdeps/unix/sysv/linux/x86/cpu-features.c: Include
<sys/prctl.h> and <asm/prctl.h>.
(get_cet_status): Call arch_prctl with ARCH_CET_STATUS.
* sysdeps/unix/sysv/linux/x86/dl-cet.h: Include <sys/prctl.h>
and <asm/prctl.h>.
(dl_cet_allocate_legacy_bitmap): Call arch_prctl with
ARCH_CET_LEGACY_BITMAP.
(dl_cet_disable_cet): Call arch_prctl with ARCH_CET_DISABLE.
(dl_cet_lock_cet): Call arch_prctl with ARCH_CET_LOCK.
* sysdeps/x86/libc-start.c: Include <startup.h>.
Rical Jasan [Tue, 6 Dec 2016 22:47:02 +0000 (20:47 -0200)]
Add manual documentation for threads.h
This patch updates the manual and adds a new chapter to the manual,
explaining types macros, constants and functions defined by ISO C11
threads.h standard.
[BZ# 14092]
* manual/debug.texi: Update adjacent chapter name.
* manual/probes.texi: Likewise.
* manual/threads.texi (ISO C Threads): New section.
(POSIX Threads): Convert to a section.
This patch adds to testsuite new test cases to test all new introduced
C11 threads functions, types and macros are tested.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Juan Manuel Torres Palma <jmtorrespalma@gmail.com>
This patch adds the required abilist symbols for C11 thread support.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
This patch adds the tss_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically tss_create, tss_delete, tss_get, tss_set, and required
types.
Mostly of the definitions are composed based on POSIX conterparts, including
tss_t (pthread_key_t).
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/data/threads.h-data (thread_local): New macro.
(TSS_DTOR_ITERATIONS): Likewise.
(tss_t): New type.
(tss_dtor_t): Likewise.
(tss_create): New function.
(tss_get): Likewise.
(tss_set): Likewise.
(tss_delete): Likewise.
* nptl/Makefile (libpthread-routines): Add tss_create, tss_delete,
tss_get, and tss_set objects.
* nptl/Versions (libpthread) [GLIBC_2.28]: Likewise.
* nptl/tss_create.c: New file.
* nptl/tss_delete.c: Likewise.
* nptl/tss_get.c: Likewise.
* nptl/tss_set.c: Likewise.
* sysdeps/nptl/threads.h (thread_local): New define.
(TSS_DTOR_ITERATIONS): Likewise.
(tss_t): New typedef.
(tss_dtor_t): Likewise.
(tss_create): New prototype.
(tss_get): Likewise.
(tss_set): Likewise.
(tss_delete): Likewise.
This patch adds the cnd_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically cnd_broadcast, cnd_destroy, cnd_init, cnd_signal,
cnd_timedwait, cnd_wait, and required types.
Mostly of the definitions are composed based on POSIX conterparts, and
cnd_t is also based on internal pthreads fields, but with distinct internal
layout to avoid possible issues with code interchange (such as trying to pass
POSIX structure on C11 functions and to avoid inclusion of pthread.h). The
idea is to make it possible to share POSIX internal implementation for mostly
of the code making adjust where only required.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
This patch adds the call_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically call_once and required types.
Mostly of the definitions are composed based on POSIX conterparts,including
once_flag (pthread_once_t). The idea is to make possible to share POSIX
internal implementations for mostly of the code (and making adjustment only
when required).
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
[BZ #14092]
* conform/data/threads.h-data (ONCE_FLAG_INIT): New macro.
(once_flag): New type.
(call_once): New function.
* nptl/Makefile (libpthread-routines): Add call_once object.
* nptl/Versions (libphread) [GLIBC_2.28]: Add call_once symbol.
* nptl/call_once.c: New file.
* sysdeps/nptl/threads.h (ONCE_FLAG_INIT): New define.
(once_flag): New type.
(call_once): New prototype.
This patch adds the mtx_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically mtx_init, mtx_destroy, mtx_lock, mtx_timedlock, mtx_trylock,
mtx_unlock, and required types.
Mostly of the definitions are composed based on POSIX conterparts, and mtx_t
is also based on internal pthread fields, but with a distinct internal layout
to avoid possible issues with code interchange (such as trying to pass POSIX
structure on C11 functions and to avoid inclusion of pthread.h). The idea
is to make possible to share POSIX internal implementations for mostly of
the code (and making adjustment only when required).
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
This patch adds the thrd_* definitions from C11 threads (ISO/IEC 9899:2011),
more specifically thrd_create, thrd_curent, rhd_detach, thrd_equal,
thrd_exit, thrd_join, thrd_sleep, thrd_yield, and required types.
Mostly of the definitions are composed based on POSIX conterparts, such as
thrd_t (using pthread_t). For thrd_* function internally direct
POSIX pthread call are used with the exceptions:
1. thrd_start uses pthread_create internal implementation, but changes
how to actually calls the start routine. This is due the difference
in signature between POSIX and C11, where former return a 'void *'
and latter 'int'.
To avoid calling convention issues due 'void *' to int cast, routines
from C11 threads are started slight different than default pthread one.
Explicit cast to expected return are used internally on pthread_create
and the result is stored back to void also with an explicit cast.
2. thrd_sleep uses nanosleep internal direct syscall to avoid clobbering
errno and to handle expected standard return codes. It is a
cancellation entrypoint to be consistent with both thrd_join and
cnd_{timed}wait.
3. thrd_yield also uses internal direct syscall to avoid errno clobbering.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
and x86_64-linux-gnu).
Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
arm-linux-gnueabhf, and powerpc64le-linux-gnu.
H.J. Lu [Tue, 24 Jul 2018 14:55:35 +0000 (07:55 -0700)]
Add <bits/indirect-return.h>
Add <bits/indirect-return.h> and include it in <ucontext.h>.
__INDIRECT_RETURN defined in <bits/indirect-return.h> indicates if
swapcontext requires special compiler treatment. The default
__INDIRECT_RETURN is empty.
On x86, when shadow stack is enabled, __INDIRECT_RETURN is defined
with indirect_return attribute, which has been added to GCC 9, to
indicate that swapcontext returns via indirect branch. Otherwise
__INDIRECT_RETURN is defined with returns_twice attribute.
When shadow stack is enabled, remove always_inline attribute from
prepare_test_buffer in string/tst-xbzero-opt.c to avoid:
tst-xbzero-opt.c: In function ‘prepare_test_buffer’:
tst-xbzero-opt.c:105:1: error: function ‘prepare_test_buffer’ can never be inlined because it uses setjmp
prepare_test_buffer (unsigned char *buf)
when indirect_return attribute isn't available.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* bits/indirect-return.h: New file.
* misc/sys/cdefs.h (__glibc_has_attribute): New.
* sysdeps/x86/bits/indirect-return.h: Likewise.
* stdlib/Makefile (headers): Add bits/indirect-return.h.
* stdlib/ucontext.h: Include <bits/indirect-return.h>.
(swapcontext): Add __INDIRECT_RETURN.
* string/tst-xbzero-opt.c (ALWAYS_INLINE): New.
(prepare_test_buffer): Use it.
H.J. Lu [Tue, 24 Jul 2018 12:20:48 +0000 (05:20 -0700)]
x86: Update vfork to pop shadow stack
The shadow stack prevents us from pushing the saved return PC onto
the stack and returning normally. Instead we pop the shadow stack
and return directly. This is the safest way to return and ensures
any stack manipulations done by the vfork'd child doesn't cause the
parent to terminate when CET is enabled.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysdeps/unix/sysv/linux/i386/vfork.S (SYSCALL_ERROR_HANDLER):
Redefine if shadow stack is enabled.
(SYSCALL_ERROR_LABEL): Likewise.
(__vfork): Pop shadow stack and jump back to to caller directly
when shadow stack is in use.
* sysdeps/unix/sysv/linux/x86_64/vfork.S (SYSCALL_ERROR_HANDLER):
Redefine if shadow stack is enabled.
(SYSCALL_ERROR_LABEL): Likewise.
(__vfork): Pop shadow stack and jump back to to caller directly
when shadow stack is in use.
Samuel Thibault [Fri, 20 Jul 2018 00:49:44 +0000 (02:49 +0200)]
check-execstack: Permit sysdeps to xfail some libs
* scripts/check-execstack.awk: Consider `xfail' variable containing a
list
of libraries whose stack executability is expected.
* elf/Makefile ($(objpfx)check-execstack.out): Pass
$(check-execstack-xfail) to check-execstack.awk through `xfail'
variable.
* sysdeps/mach/hurd/i386/Makefile (check-execstack-xfail): Set to ld.so
libc.so libpthread.so.
Thomas Schwinge [Thu, 19 Jul 2018 23:29:55 +0000 (01:29 +0200)]
hurd: Implement pipe2
* sysdeps/mach/hurd/pipe2.c: New file, copy from pipe.c. Evolve it to
implement __pipe2.
* sysdeps/mach/hurd/pipe.c (__pipe): Reimplement using __pipe2.
benchtests: improve argument parsing through argparse library
The argparse library is used on compare_bench script to improve command line
argument parsing. The 'schema validation file' is now optional, reducing by
one the number of required parameters.
* benchtests/scripts/compare_bench.py (__main__): use the argparse
library to improve command line parsing.
(__main__): make schema file as optional parameter (--schema),
defaulting to benchtests/scripts/benchout.schema.json.
(main): move out of the parsing stuff to __main_ and leave it
only as caller of main comparison functions.
Multiple updates for Occitan language including alternative month names,
update abday and abmon, fix typos in day, fix d_fmt, correct LC_NAME,
and use “copy "ca_ES"” as LC_COLLATE.
[BZ #23140]
* localedata/locales/oc_FR (mon): Rename to...
(alt_mon): This, then update October (typo fix).
(mon): New content (genitive case, month names preceded by
"de" or "d’").
[BZ #23422]
* localedata/locales/oc_FR (abday): Update all items.
(day): Update Wednesday and Saturday (typo fixes).
(abmon): Update all items, except May.
(d_fmt): Update "%d.%m.%Y" -> "%d/%m/%Y".
(LC_IDENTIFICATION): Bump the revision number and date.
Keep the "category" entries in alphabetic order.
(LC_ADDRESS): Remove no longer needed comment.
(LC_COLLATE): Use “copy "ca_ES"”.
(LC_NAME): Set the correct values of "name_fmt", "name_mr", and
"name_mrs".
Joseph Myers [Wed, 18 Jul 2018 21:04:12 +0000 (21:04 +0000)]
Avoid insecure usage of tmpnam in tests.
Various glibc testcases use tmpnam in ways subject to race conditions
(generate a temporary file name, then later open that file without
O_EXCL).
This patch fixes those tests to use mkstemp - generally a minimal
local fix to use mkstemp instead of tmpnam, rather than a larger fix
to use other testsuite infrastructure for temporary files. The
unchanged use of tmpnam in posix/wordexp-test.c would fail safe in the
event of a race (it's generating a name for use with mkdir rather than
for a file to be opened for writing).
Tested for x86_64.
* grp/tst_fgetgrent.c: Include <unistd.h>.
(main): Use mkstemp instead of tmpnam.
* io/test-utime.c (main): Likewise.
* posix/annexc.c (macrofile): Change to modifiable array.
(get_null_defines): Use mkstemp instead of tmpnam. Do not remove
macrofile here.
* posix/bug-getopt1.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt2.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt3.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt4.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* posix/bug-getopt5.c: Include <stdlib.h>.
(do_test): Use mkstemp instead of tmpnam.
* stdio-common/bug7.c: Include <stdlib.h> and <unistd.h>.
(main): Use mkstemp instead of tmpnam.
* stdio-common/tst-fdopen.c: Include <stdlib.h>.
(main): Use mkstemp instead of tmpnam.
* stdio-common/tst-ungetc.c: Include <stdlib.h>.
(main): use mkstemp instead of tmpnam.
* stdlib/isomac.c (macrofile): Change to modifiable array.
(get_null_defines): Use mkstemp instead of tmpnam. Do not remove
macrofile here.