And since the function is called prior thread pointer setup, it
triggers a invalid memory access (this is shown with the failure
of elf/tst-tls1-static-non-pie).
Although it might characterizes as compiler issue or missed
optimization, to be safe also disables stack protector on
static-reloc object.
Checked on x86_64-linux-gnu and sparc64-linux-gnu. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Mike FABIAN [Thu, 29 Sep 2022 14:04:42 +0000 (16:04 +0200)]
Update to Unicode 15.0.0 [BZ #29604]
Unicode 15.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 15.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 4489
Total removed characters in newly generated WIDTH: 0
Total changed characters in newly generated WIDTH: 0
Total added characters in newly generated WIDTH: 4257
alpha: Added 4389 characters in new ctype which were not in old ctype
combining: Added 42 characters in new ctype which were not in old ctype
combining_level3: Added 34 characters in new ctype which were not in old ctype
graph: Added 4489 characters in new ctype which were not in old ctype
lower: Added 73 characters in new ctype which were not in old ctype
print: Added 4489 characters in new ctype which were not in old ctype
punct: Missing 5 characters of old ctype in new ctype
punct: Missing: ఄ 0xc04 TELUGU SIGN COMBINING ANUSVARA ABOVE
punct: Missing: ྂ 0xf82 TIBETAN SIGN NYI ZLA NAA DA
punct: Missing: ྃ 0xf83 TIBETAN SIGN SNA LDAN
punct: Missing: 𑂀 0x11080 KAITHI SIGN CANDRABINDU
punct: Missing: 𑂁 0x11081 KAITHI SIGN ANUSVARA
That’s OK, because these are now Alphabetic in DerivedCoreProperties.txt
punct: Added 105 characters in new ctype which were not in old ctype
Resolves: BZ #29604 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Joseph Myers [Wed, 5 Oct 2022 22:11:27 +0000 (22:11 +0000)]
Update kernel version to 6.0 in header constant tests
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.0. (There are no new
constants covered by these tests in 6.0 that need any other header
changes.)
The compiler might transform __stpcpy calls (which are routed to
__builtin_stpcpy as an optimization) to strcpy and x86_64 strcpy
multiarch implementation does not build any working symbol due
ISA_SHOULD_BUILD not being evaluated for IS_IN(rtld).
Checked on x86_64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
netname.c: In function ‘user2netname’:
netname.c:51:28: error: ‘%s’ directive writing up to 255 bytes into a
region of size between 239 and 249 [-Werror=format-overflow=]
51 | sprintf (netname, "%s.%d@%s", OPSYS, uid, dfltdom);
| ^~ ~~~~~~~
netname.c:51:3: note: ‘sprintf’ output between 8 and 273 bytes into a
destination of size 256
51 | sprintf (netname, "%s.%d@%s", OPSYS, uid, dfltdom);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
However the code does test prior the sprintf call that dfltdom plus
the required extra space for OPSYS, uid, and extra character will not
overflow and return 0 instead.
Checked on x86_64-linux-gnu and i686-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
GCC with -Os warns that the mq_send input may be used uninitialized.
Although for the tests the data content sent is not important, since
both tests checks only if mq_notify was properly set, the warning is
correct and data is indeed uninitialized.
Checked on x86_64-linux-gnu and i686-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Martin Jansa [Wed, 21 Sep 2022 13:51:03 +0000 (10:51 -0300)]
locale: prevent maybe-uninitialized errors with -Os [BZ #19444]
Fixes following error when building with -Os:
| In file included from strcoll_l.c:43:
| strcoll_l.c: In function '__strcoll_l':
| ../locale/weight.h:31:26: error: 'seq2.back_us' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
| int_fast32_t i = table[*(*cpp)++];
| ^~~~~~~~~
| strcoll_l.c:304:18: note: 'seq2.back_us' was declared here
| coll_seq seq1, seq2;
| ^~~~
| In file included from strcoll_l.c:43:
| ../locale/weight.h:31:26: error: 'seq1.back_us' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
| int_fast32_t i = table[*(*cpp)++];
| ^~~~~~~~~
| strcoll_l.c:304:12: note: 'seq1.back_us' was declared here
| coll_seq seq1, seq2;
| ^~~~ Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Joseph Myers [Wed, 5 Oct 2022 19:21:25 +0000 (19:21 +0000)]
Regenerate sysdeps/mach/hurd/bits/errno.h
This addition to the list of source headers in
sysdeps/mach/hurd/bits/errno.h appears in the source tree after
build-many-glibcs.py runs, I'm guessing resulting from gnumach commit c566ad85a2d6728ebc8ec0f461a3b35df300e96e.
nscd: Drop local address tuple variable [BZ #29607]
When a request needs to be resent (e.g. due to insufficient buffer
space), the references to subsequent tuples in the local variable are
stale and should not be used. This used to work by accident before, but
since 1d495912a it no longer does. Instead of trying to reset it, just
let gethostbyname4_r write into TUMPBUF6 for us, thus maintaining a
consistent state at all times. This is now consistent with what is done
in gaih_inet for getaddrinfo.
Aurelien Jarno [Mon, 3 Oct 2022 21:46:11 +0000 (23:46 +0200)]
x86-64: Require BMI1/BMI2 for AVX2 strrchr and wcsrchr implementations
The AVX2 strrchr and wcsrchr implementation uses the 'blsmsk'
instruction which belongs to the BMI1 CPU feature and the 'shrx'
instruction, which belongs to the BMI2 CPU feature.
Aurelien Jarno [Mon, 3 Oct 2022 21:46:11 +0000 (23:46 +0200)]
x86-64: Require BMI2 and LZCNT for AVX2 memrchr implementation
The AVX2 memrchr implementation uses the 'shlxl' instruction, which
belongs to the BMI2 CPU feature and uses the 'lzcnt' instruction, which
belongs to the LZCNT CPU feature.
Aurelien Jarno [Mon, 3 Oct 2022 21:46:11 +0000 (23:46 +0200)]
x86-64: Require BMI2 for AVX2 wcs(n)cmp implementations
The AVX2 wcs(n)cmp implementations use the 'bzhi' instruction, which
belongs to the BMI2 CPU feature.
NB: It also uses the 'tzcnt' BMI1 instruction, but it is executed as BSF
as BSF if the CPU doesn't support TZCNT, and produces the same result
for non-zero input.
Aurelien Jarno [Mon, 3 Oct 2022 21:46:11 +0000 (23:46 +0200)]
x86-64: Require BMI2 for AVX2 strncmp implementation
The AVX2 strncmp implementations uses the 'bzhi' instruction, which
belongs to the BMI2 CPU feature.
NB: It also uses the 'tzcnt' BMI1 instruction, but it is executed as BSF
as BSF if the CPU doesn't support TZCNT, and produces the same result
for non-zero input.
Aurelien Jarno [Mon, 3 Oct 2022 21:46:11 +0000 (23:46 +0200)]
x86-64: Require BMI2 for AVX2 strcmp implementation
The AVX2 strcmp implementation uses the 'bzhi' instruction, which
belongs to the BMI2 CPU feature.
NB: It also uses the 'tzcnt' BMI1 instruction, but it is executed as BSF
as BSF if the CPU doesn't support TZCNT, and produces the same result
for non-zero input.
Aurelien Jarno [Mon, 3 Oct 2022 21:46:11 +0000 (23:46 +0200)]
x86-64: Require BMI2 for AVX2 str(n)casecmp implementations
The AVX2 str(n)casecmp implementations use the 'bzhi' instruction, which
belongs to the BMI2 CPU feature.
NB: It also uses the 'tzcnt' BMI1 instruction, but it is executed as BSF
as BSF if the CPU doesn't support TZCNT, and produces the same result
for non-zero input.
Noah Goldstein [Sat, 1 Oct 2022 04:13:27 +0000 (21:13 -0700)]
x86: Cleanup pthread_spin_{try}lock.S
Save a jmp on the lock path coming from an initial failure in
pthread_spin_lock.S. This costs 4-bytes of code but since the
function still fits in the same number of 16-byte blocks (default
function alignment) it does not have affect on the total binary size
of libc.so (unchanged after this commit).
pthread_spin_trylock was using a CAS when a simple xchg works which
is often more expensive.
hppa: Fix initialization of dp register [BZ 29635]
After upgrading glibc to Debian 2.35-1, gdb faulted on
startup and dropped core in a function call in the main
application. This was caused by not initializing the
global dp register for the main application early enough.
Restore the code to initialize dp in _dl_start_user.
It was removed when code was added to initialize dp in
elf_machine_runtime_setup.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Joseph Myers [Fri, 30 Sep 2022 19:36:41 +0000 (19:36 +0000)]
Fix iseqsig for _FloatN and _FloatNx in C++ with GCC 13
With GCC 13, _FloatN and _FloatNx types, when they exist, are distinct
types like they are in C with GCC 7 and later, rather than typedefs
for types such as float, double or long double.
This breaks the templated iseqsig implementation for C++ in <math.h>,
when used with types that were previously implemented as aliases. Add
the necessary definitions for _Float32, _Float64, _Float128 (when the
same format as long double), _Float32x and _Float64x in this case, so
that iseqsig can be used with such types in C++ with GCC 13 as it
could with previous GCC versions.
Also add tests for calling iseqsig in C++ with arguments of such types
(more minimal than existing tests, so that they can work with older
GCC versions and without relying on any C++ library support for the
types or on hardcoding details of their formats). The LDBL_MANT_DIG
!= 106 conditionals on some tests are because the type-generic
comparison macros have undefined behavior when neither argument has a
type whose set of values is a subset of those for the type of the
other argument, which applies when one argument is IBM long double and
the other is an IEEE format wider than binary64.
Tested with build-many-glibcs.py glibcs build for aarch64-linux-gnu
i686-linux-gnu mips-linux-gnu mips64-linux-gnu-n32 powerpc-linux-gnu
powerpc64le-linux-gnu x86_64-linux-gnu.
Xi Ruoyao [Sat, 24 Sep 2022 07:45:34 +0000 (15:45 +0800)]
LoongArch: Add static PIE support
If the compiler is new enough, enable static PIE support. In the static
PIE version of _start (in rcrt1.o), use la.pcrel instead of la.got
because in a static PIE we cannot use GOT entries until the dynamic
relocations for GOT are resolved.
Joseph Myers [Wed, 28 Sep 2022 20:09:34 +0000 (20:09 +0000)]
Update _FloatN header support for C++ in GCC 13
GCC 13 adds support for _FloatN and _FloatNx types in C++, so breaking
the installed glibc headers that assume such support is not present.
GCC mostly works around this with fixincludes, but that doesn't help
for building glibc and its tests (glibc doesn't itself contain C++
code, but there's C++ code built for tests). Update glibc's
bits/floatn-common.h and bits/floatn.h headers to handle the GCC 13
support directly.
In general the changes match those made by fixincludes, though I think
the ones in sysdeps/powerpc/bits/floatn.h, where the header tests
__LDBL_MANT_DIG__ == 113 or uses #elif, wouldn't match the existing
fixincludes patterns.
Some places involving special C++ handling in relation to _FloatN
support are not changed. There's no need to change the
__HAVE_FLOATN_NOT_TYPEDEF definition (also in a form that wouldn't be
matched by the fixincludes fixes) because it's only used in relation
to macro definitions using features not supported for C++
(__builtin_types_compatible_p and _Generic). And there's no need to
change the inline function overloads for issignaling, iszero and
iscanonical in C++ because cases where types have the same format but
are no longer compatible types are handled automatically by the C++
overload resolution rules.
This patch also does not change the overload handling for iseqsig, and
there I think changes *are* needed, beyond those in this patch or made
by fixincludes. The way that overload is defined, via a template
parameter to a structure type, requires overloads whenever the types
are incompatible, even if they have the same format. So I think we
need to add overloads with GCC 13 for every supported _FloatN and
_FloatNx type, rather than just having one for _Float128 when it has a
different ABI to long double as at present (but for older GCC, such
overloads must not be defined for types that end up defined as
typedefs for another type).
Tested with build-many-glibcs.py: compilers build for
aarch64-linux-gnu ia64-linux-gnu mips64-linux-gnu powerpc-linux-gnu
powerpc64le-linux-gnu x86_64-linux-gnu; glibcs build for
aarch64-linux-gnu ia64-linux-gnu i686-linux-gnu mips-linux-gnu
mips64-linux-gnu-n32 powerpc-linux-gnu powerpc64le-linux-gnu
x86_64-linux-gnu.
nss: Use shared prefix in IPv4 address in tst-reload1
Otherwise, sorting based on the longest-matching prefix in
getaddrinfo can reorder the addresses in ways the test does not
expect, depending on the IPv4 address of the host.
Use C11 atomics instead of atomic_decrement_and_test
Replace atomic_decrement_and_test with atomic_fetch_add_relaxed.
These are simple counters which do not protect any shared data from
concurrent accesses. Also remove the unused file cond-perf.c.
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Remove the 4 uses of atomic_and and atomic_or with atomic_fetch_and_acquire
and atomic_fetch_or_acquire. This is preserves existing implied semantics,
however relaxed MO on FUTEX_OWNER_DIED accesses may be correct.
The need to maintain elf/elf.h and scripts/glibcelf.py in parallel
results in a backporting hazard: they need to be kept in sync to
avoid elf/tst-glibcelf consistency check failures. glibcelf (unlike
tst-glibcelf) does not use the C implementation to extract constants.
This applies the additional glibcpp syntax checks to <elf.h>.
This changereplaces the types derived from Python enum types with
custom types _TypedConstant, _IntConstant, and _FlagConstant. These
types have fewer safeguards, but this also allows incremental
construction and greater flexibility for grouping constants among
the types. Architectures-specific named constants are now added
as members into their superclasses (but value-based lookup is
still restricted to generic constants only).
Consequently, check_duplicates in elf/tst-glibcelf has been adjusted
to accept differently-named constants of the same value if their
subtypes are distinct. The ordering check for named constants
has been dropped because they are no longer strictly ordered.
Further test adjustments: Some of the type names are different.
The new types do not support iteration (because it is unclear
whether iteration should cover the all named values (including
architecture-specific constants), or only the generic named values),
so elf/tst-glibcelf now uses by_name explicit (to get all constants).
PF_HP_SBP and PF_PARISC_SBP are now of distinct types (PfHP and
PfPARISC), so they are how both present on the Python side. EM_NUM
and PT_NUM are filtered (which was an oversight in the old
conversion).
The new version of glibcelf should also be compatible with earlier
Python versions because it no longer depends on the enum module and its
advanced features.
m68k: Enforce 4-byte alignment on internal locks (BZ #29537)
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
nss: Fix tst-nss-files-hosts-long on single-stack hosts (bug 24816)
getent implicitly passes AI_ADDRCONFIG to getaddrinfo by default.
Use --no-addrconfig to suppress that, so that both IPv4 and IPv6
lookups succeed even if the address family is not supported by the
host.
gconv: Use 64-bit interfaces in gconv_parseconfdir (bug 29583)
It's possible that inode numbers are outside the 32-bit range.
The existing code only handles the in-libc case correctly, and
still uses the legacy interfaces when building iconv.
elf: Implement force_first handling in _dl_sort_maps_dfs (bug 28937)
The implementation in _dl_close_worker requires that the first
element of l_initfini is always this very map (“We are always the
zeroth entry, and since we don't include ourselves in the
dependency analysis start at 1.”). Rather than fixing that
assumption, this commit adds an implementation of the force_first
argument to the new dependency sorting algorithm. This also means
that the directly dlopen'ed shared object is always initialized last,
which is the least surprising behavior in the presence of cycles.
Samuel Thibault [Sat, 17 Sep 2022 15:42:42 +0000 (17:42 +0200)]
tst-sprintf-errno: Update Hurd message length
03ad444e8e08 ("mach: Fix incoherency between perror and strerror") fixesd
the output of error messages, but tst-sprintf-errno.c was still checking
the old (erroneous) format length. This updates the expected output length
according to the 03ad444e8e08 fix.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface") Fixes: 7f33b09c65 ("RISC-V: Linux ABI") Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Samuel Thibault [Thu, 15 Sep 2022 19:53:57 +0000 (21:53 +0200)]
hurd: Make readlink* just reopen the file used for stat
9e5c991106cb ("hurd: Fix readlink() hanging on fifo") separated opening
the file for the stat call from opening the file for the read call. That
however opened a small window for the file to change. Better make this
atomic by reopening the file with O_READ.
Samuel Thibault [Wed, 14 Sep 2022 16:52:52 +0000 (18:52 +0200)]
hurd: Fix readlink() hanging on fifo
readlink() opens the target with O_READ to be able to read the symlink
content. When the target is actually a fifo, that would hang waiting for a
writer (caught in the coreutils testsuite). We thus have to first lookup the
target without O_READ to perform io_stat and lookout for fifos, and only
after checking the symlink type, we can re-lookup with O_READ.
Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 [BZ# 29564]
make-4.4 will add long flags to MAKEFLAGS variable:
* WARNING: Backward-incompatibility!
Previously only simple (one-letter) options were added to the MAKEFLAGS
variable that was visible while parsing makefiles. Now, all options
are available in MAKEFLAGS.
This causes locale builds to fail when long options are used:
$ make --shuffle
...
make -C localedata install-locales
make: invalid shuffle mode: '1662724426r'
The change fixes it by passing eash option via whitespace and dashes.
That way option is appended to both single-word form and whitespace
separated form.
While at it fixed --silent mode detection in $(MAKEFLAGS) by filtering
out --long-options. Otherwise options like --shuffle flag enable silent
mode unintentionally. $(silent-make) variable consolidates the checks.
Resolves: BZ# 29564
CC: Paul Smith <psmith@gnu.org> CC: Siddhesh Poyarekar <siddhesh@gotplt.org> Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Use relaxed atomics since there is no MO dependence
Replace the 3 uses of atomic_bit_set and atomic_bit_test_set with
atomic_fetch_or_relaxed. Using relaxed MO is correct since the
atomics are used to ensure memory is released only once.
makedb: fix build with libselinux >= 3.1 (Bug 26233)
glibc doesn't build with libselinux 3.1 that has been released recently
due to new deprecations introduced in that version and the fact that
glibc is built with -Werror by default:
| makedb.c: In function ‘set_file_creation_context’:
| makedb.c:849:3: error: ‘security_context_t’ is deprecated [-Werror=deprecated-declarations]
| 849 | security_context_t ctx;
| | ^~~~~~~~~~~~~~~~~~
| makedb.c:863:3: error: ‘matchpathcon’ is deprecated: Use selabel_lookup instead [-Werror=deprecated-declarations]
| 863 | if (matchpathcon (outname, S_IFREG | mode, &ctx) == 0 && ctx != NULL)
| | ^~
| In file included from makedb.c:50:
| /usr/include/selinux/selinux.h:500:12: note: declared here
| 500 | extern int matchpathcon(const char *path,
| | ^~~~~~~~~~~~
| cc1: all warnings being treated as errors
This patch fixes the makedb half of bug 26233 by moving to the new
SELinux APIs and removes the existing compiler pragmas as no longer
required. Upstream API usage feedback gathered by Arjun is integrated
into this version of the fix.
The built makedb was tested and operates as expected on x86_64 with
SELinu in enforcing mode.
Samuel Thibault [Sun, 11 Sep 2022 12:20:32 +0000 (14:20 +0200)]
tst-sprintf-errno: Update Hurd message output
03ad444e8e08 ("mach: Fix incoherency between perror and strerror")
fixesd the output of error messages, but tst-sprintf-errno.c was still
checking the old (erroneous) format. This updates the expected output
according to the 03ad444e8e08 fix.
Paul Eggert [Fri, 9 Sep 2022 01:08:32 +0000 (20:08 -0500)]
mktime: improve heuristic for ca-1986 Indiana DST
This patch syncs mktime.c from Gnulib, fixing a
problem reported by Mark Krenz <https://bugs.gnu.org/48085>,
and it should fix BZ#29035 too.
* time/mktime.c (__mktime_internal): Be more generous about
accepting arguments with the wrong value of tm_isdst, by falling
back to a one-hour DST difference if we find no nearby DST that is
unusual. This fixes a problem where "1986-04-28 00:00 EDT" was
rejected when TZ="America/Indianapolis" because the nearest DST
timestamp occurred in 1970, a temporal distance too great for the
old heuristic. This also also narrows the search a bit, which
is a minor performance win.
Javier Pello [Mon, 5 Sep 2022 18:09:01 +0000 (20:09 +0200)]
elf: Fix hwcaps string size overestimation
Commit dad90d528259b669342757c37dedefa8577e2636 added glibc-hwcaps
support for LD_LIBRARY_PATH and, for this, it adjusted the total
string size required in _dl_important_hwcaps. However, in doing so
it inadvertently altered the calculation of the size required for
the power set strings, as the computation of the power set string
size depended on the first value assigned to the total variable,
which is later shifted, resulting in overallocation of string
space. Fix this now by using a different variable to hold the
string size required for glibc-hwcaps.
Andreas Schwab [Thu, 8 Sep 2022 08:25:21 +0000 (10:25 +0200)]
errlist: add missing entry for EDEADLOCK (bug 29545)
Some architectures (mips, powerpc and sparc) define separate values for
EDEADLOCK and EDEADLK. Readd the errlist entry for EDEADLOCK for those
configurations. Also use the dependency files from generating the
auxiliary errlist and siglist files.
Joseph Myers [Wed, 7 Sep 2022 18:39:28 +0000 (18:39 +0000)]
Do not define static_assert or thread_local in headers for C2x
C2x makes static_assert and thread_local into keywords, removing the
definitions as macros in assert.h and threads.h. Thus, disable those
macros in those glibc headers for C2x.
The disabling is done based on a combination of language version and
__GNUC_PREREQ, *not* based on __GLIBC_USE (ISOC2X), on the principle
that users of the header (when requesting C11 or later APIs - not
assert.h for C99 and older API versions) should always have the names
static_assert or thread_local available after inclusion of the header,
whether as a keyword or as a macro. Thus, when using a compiler
without the keywords (whether an older compiler, possibly in C2x mode,
or _GNU_SOURCE with any compiler but in an older language mode, for
example) the macros should be defined, even when C2x APIs have been
requested. The __GNUC_PREREQ conditionals here may well need updating
with the versions of other compilers that gained support for these
keywords in C2x mode.
scripts/dso-ordering-test.py: Generate program run-time dependencies
The main program needs to depend on all shared objects, even objects
that have link-time dependencies among shared objects. Filtering
out shared objects that already have an link-time dependencies is not
necessary here; make will do this automatically.
debug: test for more required cacellation points (BZ# 29274)
Generalize the test for cancellation point in __read_chk to also test
the other fortified functions with required cancellation points.
Since there is not easy way to force some syscalls to block (for
instance pread) the test tests two modes: cancellation on blocked
syscalls and early cancellation on pending request.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Co-authored-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
git://sourceware.org / glibc.git / log