Cygwin: sigpending: don't report pending signals for other threads
The sigpending mechanism failed to check if the pending signal was a
process-wide signal, or a signal for the curent thread. Fix that by
adding a matching conditional to wait_sig's __SIGPENDING code.
So far sig_send's return type is int. The problem with this is
that sig_send returns a sigset_t on __SIGPENDING, and sigset_t
is defined as long type. So the function only returns the lower
32 bit of sigset_t, which is fine on 32 bit, but casts away the
pending RT signals on 64 bit.
Fix this by changing the return type of sig_send to sigset_t, so
as not to narrow down the sigset when returning from handling
__SIGPENDING. Make sure to cast correctly in all invocations
of sig_send.
* libm/common/s_expm1.c ("math_config.h"): Include.
(expm1): Use __math_oflow to set errno.
* libm/common/s_log1p.c ("math_config.h"): Include.
(log1p): Use __math_divzero and __math_invalid to set errno.
* libm/common/sf_expm1.c ("math_config.h"): Include.
(expm1f): Use __math_oflow to set errno.
* libm/common/sf_log1p.c ("math_config.h"): Include.
(log1pf): Use __math_divzero and __math_invalid to set errno.
Mark Geisert [Wed, 26 Jun 2019 09:44:56 +0000 (02:44 -0700)]
Cygwin: Fix return value of sched_getaffinity
Have sched_getaffinity() interface like glibc's, and provide an
undocumented internal interface __sched_getaffinity_sys() like the Linux
kernel's sched_getaffinity() for benefit of taskset(1).
Update the offsets used to save registers into the stejmp jmp_buf
structure in order to:
* Avoid writing the supervision register outside the buffer and thus
clobbering something on the stack. Previously the supervision register
was written at offset 124 while the buffer was of length 124.
* Shrink the jmp_buf down to the size actually needed, by avoiding holes
at the locations of omitted registers.
Ken Brown [Mon, 24 Jun 2019 16:28:48 +0000 (12:28 -0400)]
Cygwin: timerfd: avoid a deadlock
Add a function timerfd_tracker::enter_critical_section_cancelable,
which is like enter_critical_section but honors a cancel event. Call
this when a timer expires while the timerfd thread is in its inner
loop. This avoids a deadlock if timerfd_tracker::dtor has entered its
critical section and is trying to cancel the thread. See
https://cygwin.com/ml/cygwin/2019-06/msg00096.html.
Mark Geisert [Sun, 23 Jun 2019 21:51:06 +0000 (14:51 -0700)]
Cygwin: Implement sched_[gs]etaffinity()
This patch set implements the Linux syscalls sched_getaffinity,
sched_setaffinity, pthread_getaffinity_np, and pthread_setaffinity_np.
Linux has a straightforward view of the cpu sets used in affinity masks.
They are simply long (1024-bit) bit masks. This code emulates that view
while internally dealing with Windows' distribution of available CPUs among
processor groups.
Ken Brown [Wed, 19 Jun 2019 15:14:37 +0000 (11:14 -0400)]
Cygwin: FIFO: slightly change the use of write_ready
Make it a manual reset event. It's only used once to allow a reader
to open, and there's no reason to ever reset it. Defensively set it
when a client connection is recorded, even though it should be set by
the writer that connected.
Ken Brown [Fri, 21 Jun 2019 21:33:30 +0000 (17:33 -0400)]
Cygwin: FIFO: simplify raw_read
Call NtReadFile directly instead of calling fhandler_base::raw_read.
In addition to being simpler, this gives us access to the return value
from NtReadFile.
Ken Brown [Fri, 21 Jun 2019 22:49:11 +0000 (18:49 -0400)]
Cygwin: FIFO: improve termination of the listen_client thread
Add a method fifo_client_handler::pipe_state that queries Windows for
the state of a pipe instance. Use this to help terminate the
listen_client thread cleanly.
If the last client handler is useless, delete it instead of declaring
it invalid.
Ken Brown [Sat, 22 Jun 2019 17:58:12 +0000 (13:58 -0400)]
Cygwin: FIFO: avoid deadlock when closing
fhandler_fifo::close could be called from a signal handler or another
thread at a time when another function is holding the fifo_client
lock. This could prevent the listen_client thread from acting on the
thread termination event. Avoid a deadlock by calling
fifo_client_unlock at the beginning of fhandler_fifo::close.
Corinna Vinschen [Wed, 12 Jun 2019 20:31:14 +0000 (22:31 +0200)]
Rename <xlocale.h> back to <sys/_locale.h>
libX11 provides <X11/Xlocale.h>. The build of libX11 itself adds
include/X11 to the compiler's include path. This results in a name
collision with /usr/include/xlocale.h on case-insensitive filesystems.
Commit 90e35b1eb3df renamed sys/_locale.h to xlocale.h in March 2017 under
the assumption that we should provide the locale_t type in the same file
as on Linux, FreeBSD, and Darwin.
A few weeks later (June 2017), glibc removed the xlocale.h file in favor
of bits/types/locale_t.h, which shouldn't be included directly anyway.
For reference and the reasoning, see
https://sourceware.org/git/?p=glibc.git;a=commit;h=f0be25b6336d
Jeff Johnston [Fri, 7 Jun 2019 17:57:45 +0000 (13:57 -0400)]
Fix __getreent stack calculations for AMD GCN
From: Andrew Stubbs <ams@codesourcery.com>
Fix a bug in which the high-part of 64-bit values are being corrupted, leading
to erroneous stack overflow errors. The problem was only that the mixed-size
calculations are being treated as signed when they should be unsigned.
pfg [Mon, 27 Nov 2017 15:01:59 +0000 (15:01 +0000)]
sys/sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Cygwin: map beyond EOF on 64 bit and WOW64 as well
32 bit Cygwin performs a POSIX-compatible mapping after EOF which
is not supported in this form on Windows. The 64 bit Windows
kernel never supported the AT_ROUND_TO_PAGE mapping flag, so we
couldn't page-aligned map the space right after the file's EOF.
So mapping beyond EOF was disabled in 64 bit Windows and WOW64.
However, if mmap works, a matching munmap should work as well,
*and* it should not accidentally unmap unrelated memory.
Therefore we enable mapping beyond EOF on 64 bit as well. Since
that mapping is always 64K aligned, the are between the last file
page and the next 64K allocation boundary will be unallocated.
There's no way around that.
Ben Wijen [Mon, 3 Jun 2019 18:15:50 +0000 (20:15 +0200)]
mkdir: always check-for-existence
When using NtCreateFile when creating a directory that already exists,
it will correctly return 'STATUS_OBJECT_NAME_COLLISION'.
However using this function to create a directory (and all its parents)
a normal use would be to start with mkdir(‘/cygdrive/c’) which translates
to ‘C:\’ for which it'll instead return ‘STATUS_ACCESS_DENIED’.
Yaakov Selkowitz [Thu, 23 May 2019 15:47:36 +0000 (11:47 -0400)]
cygcheck: expand common_apps list
An increasing number of tools are being included in Windows which have the
same names as those included in Cygwin packages. Indicating which one is
first in PATH can be helpful in diagnosing behavioural discrepencies
between them.
Cygwin: Allow accessing 48 bit address space in Windows 8.1 or later
64 bit Windows started out with a 44 bit address space due to a
restriction of the AMD64 CPUs at the time. Starting with Windows
8.1, these CPUs are not supported anymore and Windows switched to
the full 48 bit address space supported by AMD64.
Cygwin didn't follow suit yet so mmaps are still restricted to
the lower 44 bit address space. Fix that by using a system-specific
upper address for mmap allocations, 44 bit up to Windows 8, 48 bit
starting with Windows 8.1.
While at it, move the heap by another 8 Gigs to leave some space
for a potential extension of DLL address space, and restrict the
mmap lower address so the heap can grow to 32 Gigs before colliding
with mmaps.
Do not remember the child before it was successfully initialized, or we
would need more sophisticated cleanup on child initialization failure,
like cleaning up the process table and suppressing SIGCHILD delivery
with multiple threads ("waitproc") involved. Compared to that, the
potential slowdown due to an extra yield () call should be negligible.
Pause the child process after performing fork fixups even if there were
no dynamically loaded dlls with extra data/bss transfers to wait for.
This allows the parent process to cancel the current fork call even if
the child process was successfully initialized already.
This is a preparation for when the parent does remember the child no
earlier than after successful child initialization.
Cygwin: dll_list: no recursive use of nt_max_path_buf
Querying the ntlength and existence of the /var/run/cygfork directory in
the very first Cygwin process should not use nt_max_path_buf, as that
one is used by dll_list::alloc already.
NtQueryVirtualMemory for MemorySectionName may return some old path even
if the process was just started, for when some directory in between was
renamed - maybe because the NT file cache is hot for the old path still.
This was seen during gcc bootstrap, returning a MemorySectionName of
".../gcc/xgcc.exe" even if started as ".../prev-gcc/xgcc.exe", where the
directory rename from "gcc" to "prev-gcc" was done the moment before.
As we stat the module's real file right after loading now, there is no
point in using NtQueryVirtualMemory with MemorySectionName any more, and
we can use what GetModuleFileName returned instead.
Fix vfwscanf(3) assignment suppression flag handling bug
newlib's vfwscanf(3) (or specifically, __SVFWSCANF_R()) fails to correctly set
the assignment-suppressing character (`*') flag[1] which, when present in the
formatting string, results in undefined behaviour comprising retrieving and
dereferencing a pointer that was not supplied by the caller as such or at all.
When compared to the vfscanf(3) implementation, this would appear to be over
the missing goto match_failure statement preceded by the flags test seen below.
Hence, this patch (re)introduces it.
Jinke Fan [Fri, 17 May 2019 03:29:11 +0000 (11:29 +0800)]
Add support for Hygon Dhyana processor
-Add vendor identification
-Support in get_cpu_cache
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Sebastian Huber [Thu, 16 May 2019 12:40:34 +0000 (14:40 +0200)]
Fix <sys/_types.h> issues with <stddef.h>
A commit from 2016 tried to address this GCC provided <stddef.h> issue
#if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
|| defined(__DragonFly__) \
|| defined(__FreeBSD_kernel__)
/* __size_t is a typedef on FreeBSD 5, must not trash it. */
#elif defined (__VMS__)
/* __size_t is also a typedef on VMS. */
#else
#define __size_t
#endif
with an include of <stddef.h> before <sys/_types.h> in <sys/types.h>.
Is is not robust enough. Do the include of <stddef.h> in <sys/_types.h>
directly and request only the necessary types.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Sebastian Huber [Thu, 16 May 2019 12:40:32 +0000 (14:40 +0200)]
Avoid cyclic header dependencies
RTEMS uses a considerable part of FreeBSD kernel and user space sources.
These sources are compiled with a __FreeBSD__ define. On 2018-06-26
Gerald Pfeifer changed the GCC provided <stddef.h> so that it includes
<sys/_types.h> if __FreeBSD__ is defined. The Newlib <sys/_types.h>
included <sys/lock.h> which includes <sys/cdefs.h> on RTEMS which
includes <stddef.h>. To get rid of this cyclic dependency move the
optional _flock_t definition to <sys/reent.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Jim Wilson [Thu, 23 May 2019 00:41:25 +0000 (17:41 -0700)]
RISC-V: Add _LITE_EXIT in crt0.S.
This patch adds _LITE_EXIT in crt0.S to enable "lite exit" technique in
RISC-V. The changes have been tested in riscv/riscv-gnu-toolchain by
riscv-dejagnu with riscv-sim.exp/riscv-sim-nano.exp.
Jim Wilson [Thu, 23 May 2019 00:36:57 +0000 (17:36 -0700)]
RISC-V: Add size optimized memcpy, memmove, memset and strcmp.
This patch adds implementations of memcpy, memmove, memset and strcmp
optimized for size. The changes have been tested in
riscv/riscv-gnu-toolchain by riscv-dejagnu with
riscv-sim.exp/riscv-sim-nano.exp.
Make .data section placement coincide with _fdata symbol
The _fdata symbol in MIPS linker scripts is aligned to a 16-byte
boundary. The ALIGN function does not implicitly update current
location counter. If sections positioned after the assignment
do not have the same natural alignment as the ALIGN function then
the start of the section group will not coincide with the value
of the symbol.
Given the linker command sequence:
symbol = ALIGN (NN);
(.section*)
where the idiom implies a desire to mark the beginning of .section
with symbol, there must be an assignment to the location counter
between the assignment to symbol and the .section pattern.
Ken Brown [Thu, 9 May 2019 16:35:58 +0000 (12:35 -0400)]
Cygwin: FIFO: code simplifications.
There's no longer a need to consider the connect_evt after fork/exec.
After stopping the listen_client thread, all client handlers should be
in the fc_connected or fc_invalid states, so their connect_evt members
won't be used again.
Also remove code in fhandler_fifo::dup that just repeats things
already done in stop_listen_client.
Ken Brown [Thu, 9 May 2019 16:28:21 +0000 (12:28 -0400)]
Cygwin: FIFO: improve the check for the listen_client thread
Add a method fhandler_fifo::check_listen_client_thread that checks
whether the thread is running. Use it in raw_read instead of just
testing the handle listen_client_thr.
Ken Brown [Thu, 9 May 2019 15:55:30 +0000 (11:55 -0400)]
Cygwin: FIFO: don't leave a pending listen request
On exit from the listen_client thread, make sure there's no pending
FSCTL_PIPE_LISTEN request. Otherwise we might get a client connection
after restarting the thread, and we won't have a handle for
communicating with that client.
Remove the retry loop in the case of STATUS_PIPE_LISTENING; that case
shouldn't occur.
Remove the now-unused fc_connecting value from
fifo_client_connect_state.
Ken Brown [Thu, 9 May 2019 15:23:44 +0000 (11:23 -0400)]
Cygwin: FIFO: re-implement duplexers
When opening a duplexer, open a client connection to the first client
handler. Previously we gave the duplexer a bogus write handle, which
was just a duplicate of the first client handler's handle. This meant
that we had a pipe server with no clients connected, and all I/O
attempts failed with STATUS_PIPE_LISTENING.
Extend the last fcntl change to duplexers.
Remove a now unused fifo_client_handler constructor, as well as the
long unusued method fifo_client_handler::connect.
Don't create the pipe in duplex mode; the server handle will only be
used for reading.
NtQueryVirtualMemory for MemorySectionName does not reliable return the
changed dll file name when another process does move the file around,
and we may end up creating forkable hardlinks to wrong dll files.
So query the file id when loading the dll rather than before fork.
Cygwin: dll_list: stat_real_file_once as dll method
Make stat_real_file_once a method of struct dll, to be more flexible on
where to use. Also, debug print memory section name queried for a dll.
This is a preparation to query the file id when loading the dll.
The compiler driver positions the linker script at the end of the linker
command-line, after crtend.o. As a result, any INPUT objects and archive
GROUPs introduced by the linker script are placed after crtend.o and the
end-of-frame marker provided by crtend.o ends up in between .eh_frames
instead of being at the end.
This has always been a problem, but a binutils update to clean-up
redundant NULL markers in .eh_frame exposes it as a execution failure in
exception-handling tests. This patch re-orders .eh_frames in all
MIPS linker scripts so that the one from crtend.o is always placed last.
Ken Brown [Thu, 25 Apr 2019 22:21:11 +0000 (18:21 -0400)]
Cygwin: FIFO: synchronize the blocking mode of a writer's pipe
The blocking mode of the Windows pipe underlying a writer is set to
match that of the writer itself when the latter is opened. Define
fhandler_fifo::fcntl to keep the pipe and the writer in sync if the
blocking mode is changed via fcntl.
Ken Brown [Sat, 20 Apr 2019 15:41:12 +0000 (11:41 -0400)]
Cygwin: FIFO: stop the listen_client thread before fork/exec
Add methods need_fixup_before, init_fixup_before, and
fixup_before_fork_exec to accomplish this. Stopping the thread makes
sure that the client handler lists of the parent and child remain in
sync while the forking/execing is in progress.
Ken Brown [Sat, 20 Apr 2019 15:49:35 +0000 (11:49 -0400)]
Cygwin: FIFO: duplicate the i/o handle when opening a duplexer
Don't use the same i/o handle for the first client handler as is used
for the fhandler itself; this can lead to a later attempt to close the
same handle twice. Instead use a duplicate.
Ken Brown [Thu, 18 Apr 2019 15:39:52 +0000 (15:39 +0000)]
Cygwin: FIFO: avoid hang after exec
Define fhandler:fifo::fixup_after_exec, which sets listen_client_thr
and lct_termination_evt to NULL. This forces the listen_client thread
to restart on the first attempt to read after an exec. Previously the
exec'd process could hang in fhandler_fifo::raw_read.
MSP430: Make the inclusion of run_*_array fns depend on defined assembler symbols
Many of the MSP430 crt functions (e.g. to initialize bss) are linked
"dynamically", based on symbols defined in the program.
The GNU assembler defines the symbols corresponding to the crt
functions by examining the section names in the input file.
If GCC has been configured with --enable-initfini-array, then
.init_array and .fini_array will hold pointers to global
constructors/destructors. These sections can also hold functions that
need to be executed for other purposes.
The attached patch puts the __crt0_run_{preinit,init,fini}_array and
__crt0_run_array functions in their own object files, so they will
only be linked when needed.
Successfully regtested the DejaGNU GCC testsuite using the binutils and
newlib changes together with GCC trunk configured with
--enable-initfini-array.
Ken Brown [Sun, 14 Apr 2019 19:16:04 +0000 (19:16 +0000)]
Cygwin: FIFO: fix and simplify listen_client_thread
Remove fifo_client_handler::connect and move its code into
listen_client_thread. That way we can check the return status when a
client handler's connect_evt is signaled. Previously we incorrectly
assumed there was a successful connection.
Also simplify listen_client_thread in the following ways:
- Replace fhandler_fifo::disconnect_and_reconnect by a new
delete_client_handler method. Now we just delete invalid client
handlers rather than trying to re-use them.
- Try to maintain a client handler list that consists of connected
client handlers and exactly one that is listening for a connection.
This allows us to call WaitForMultipleObjects with only two wait
objects.
- Remove 'dummy_evt' from the fifo_client_handler struct; it is no
longer needed.
- On exit from listen_client_thread, delete the "extra" (listening)
client handler. Otherwise there could be a connection that doesn't
get recorded in the client handler list. This could happen when a
file descriptor is being duplicated.
Ken Brown [Sun, 14 Apr 2019 19:16:02 +0000 (19:16 +0000)]
Cygwin: FIFO: fix clone
After copyto is called, make the new fhandler's pipe_name point to the
new fhandler's pipe_name_buf, which is a *copy* of the old fhandler's
pipe_name_buf. Previously, get_pipe_name would return the wrong
result after a clone/dup, causing create_pipe_instance and open_pipe
to fail.
Also, stop the listen_client thread when cloning. Otherwise the
thread can keep accepting connections that the cloned fhandler won't
know about.
Do this via a new method fhandler_fifo::stop_listen_client, extracted
from fhandler_fifo::close.
Ken Brown [Sun, 14 Apr 2019 19:16:01 +0000 (19:16 +0000)]
Cygwin: FIFO: fix the use of the read_ready event
Make read_ready a manual reset event. It should always be set shortly
after startup of the listen_client thread and remain set until the
thread terminates. (We don't want writers to connect without being
recorded in the client handler list.)
Remove the unnecessary code that checks for read_ready when a reader
is opening.
Ken Brown [Sun, 14 Apr 2019 19:15:57 +0000 (19:15 +0000)]
Cygwin: FIFO: remember the type of the fhandler
Add data members 'reader', 'writer', and 'duplexer' to the
fhandler_fifo class. Set them in fhandler_fifo::open. ('duplexer'
replaces the previous '_duplexer'.)
Ken Brown [Sun, 14 Apr 2019 19:15:56 +0000 (19:15 +0000)]
Cygwin: FIFO: rename client[] to fc_handler[]
The word "client" suggests something that holds a handle to the client
side of the pipe (in Windows terminology). But our
fifo_client_handlers hold a handle the server side of the pipe, and
they *connect* to clients.
Implement reduced code size "tiny" printf and puts
"tiny" printf is derived from _vfprintf_r in libc/stdio/nano-vfprintf.c.
"tiny" puts has been implemented so that it just calls write, without
any other processing.
Support for buffering, reentrancy and streams has been removed from
these functions to achieve reduced code size.
This reduced code size implementation of printf and puts can be enabled
in an application by passing "--wrap printf" and "--wrap puts" to the
GNU linker. This will replace references to "printf" and "puts" in user
code with "__wrap_printf" and "__wrap_puts" respectively.
If there is no implementation of these __wrap* functions in user code,
these "tiny" printf and puts implementations will be linked into the
final executable.
The wrapping mechanism is supposed to be invisible to the user:
- A GCC wrapper option such as "-mtiny-printf" will be added to alias
these wrap commands.
- If the user is unaware of the "tiny" implementation, and chooses to
implement their own __wrap_printf and __wrap_puts, their own
implementation will be automatically chosen over the "tiny" printf and
puts from the library.
Newlib must be configured with --enable-newlib-nano-formatted-io for
the "tiny" printf and puts functions to be built into the library.
Code size reduction examples:
printf("Hello World\n")
baseline - msp430-elf-gcc gcc-8_3_0-release
text data bss
5638 214 26
"tiny" puts enabled
text data bss
714 90 20
printf("Hello %d\n", a)
baseline - msp430-elf-gcc gcc-8_3_0-release
text data bss
10916 614 28
Cygwin: use win pid+threadid for forkables dirname
Rather than newest last write time of all dlls loaded, use the forking
process' windows pid and windows thread id as directory name to create
the forkable hardlinks into. While this may create hardlinks more
often, it does avoid conflicts between dlls not having the newest last
write time.
Commit 69f4c4029183fb26d2fcae00790881620c1978a3 improved most
macro checks to be ARMv8-M baseline proof, but missed a few
occurrences which otherwise fail to build when using a CPU setting
such as cortex-m0 or cortex-m23. This patch brings the same
changes as the ones that were committed to libgloss at that time.
newlib:
* libc/sys/arm/crt0.S: Use THUMB1_ONLY rather than
__ARM_ARCH_6M__.
git://sourceware.org / newlib-cygwin.git / log