Joseph Myers [Mon, 19 Jun 2017 16:39:17 +0000 (16:39 +0000)]
Fix wait3 namespace (bug 21625).
The wait3 function was removed in the 2001 edition of POSIX.
sys/wait.h wrongly declares it for the 2001 and 2008 editions of POSIX
when XSI features are enabled. This patch fixes the conditionals.
Joseph Myers [Mon, 19 Jun 2017 16:33:00 +0000 (16:33 +0000)]
Require GCC 4.9 or later for building glibc.
This patch makes configure require GCC 4.9 or later for building
glibc, and documents that requirement. Requiring GCC 4.9 or later
allows use of _Generic (as in tzcode). It would allow <stdatomic.h>
and _Atomic to be used as well if desired, although we need to avoid
any libatomic dependencies on any platforms. This patch is explicitly
the minimum to implement a new version requirement, with any
consequent cleanups of conditional code (not in installed headers or
files shared with gnulib etc.) to be done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 4.9 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for GCC 4.9 or later.
* INSTALL: Regenerated.
Stefan Liebler [Mon, 19 Jun 2017 14:27:25 +0000 (16:27 +0200)]
S390: Sync ptrace.h with kernel. [BZ #21539]
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS
and PTRACE_SETFPREGS as these requests does not exist on s390 kernel.
But the kernel has support for PTRACE_SINGLEBLOCK,
PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and
PTRACE_TE_ABORT_RAND. Thus those are defined now.
The current kernel s390 specific ptrace.h file also defines
PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA,
PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL
and PTRACE_PROT, but those requests are not supported.
Thus those defines are skipped in glibc ptrace.h.
There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c.
The ptrace feature isn't used there anymore, thus I removed the includes.
Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h
uses ptrace-request 12 for PTRACE_GETREGS,
but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK.
The s390 kernel has never had support for PTRACE_GETREGS!
Thus glibc ptrace.h is adjusted to match kernel ptrace.h.
The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined
in glibc works as expected. If the kernel would interpret it as
PTRACE_GETREGS, then the testcase will not make any progress
and will time out.
Joseph Myers [Mon, 19 Jun 2017 12:18:46 +0000 (12:18 +0000)]
Fix siginterrupt namespace (bug 21597).
The siginterrupt function is XSI-shaded in POSIX. glibc wrongly
declares it in <signal.h> for non-XSI POSIX.1:2008. This patch fixes
the conditionals (moving it into the __USE_XOPEN_EXTENDED ||
__USE_MISC block as the minimum conservative change, although it's not
clear this obsolescent function should be declared by default).
Tested for x86_64.
[BZ #21597]
* signal/signal.h (siginterrupt): Make declaration conditional on
[__USE_XOPEN_EXTENDED || __USE_MISC].
Joseph Myers [Mon, 19 Jun 2017 12:00:13 +0000 (12:00 +0000)]
Fix signal stack namespace (bug 21584).
In POSIX.1:2008, various signal stack symbols - sigaltstack, SS_*,
SIGSTKSZ, MINSIGSTKSZ - are all XSI-shaded. glibc wrongly makes them
visible for non-XSI POSIX. This patch fixes the conditionals, leaving
the symbols available for __USE_MISC as it seems likely some of them
are widely used and should be visible by default. (Note that stack_t
is *not* XSI-shaded and so the conditionals on that are correctly
unchanged.)
Tested for x86_64.
[BZ #21584]
* signal/signal.h: Make includes of <bits/sigstack.h> and
<bits/ss_flags.h> conditional on [__USE_XOPEN_EXTENDED ||
__USE_MISC].
(sigaltstack): Make declaration conditional on
[__USE_XOPEN_EXTENDED || __USE_MISC].
Joseph Myers [Mon, 19 Jun 2017 11:59:19 +0000 (11:59 +0000)]
Define struct rusage in sys/wait.h when required (bug 21575).
Some older standards (XPG4.2 through POSIX.1:2001, XSI only) require
sys/wait.h to include the definition of struct rusage. This is
missing in glibc.
This patch adds the required definition. struct rusage is moved to a
new header bits/types/struct_rusage.h to avoid bringing in the whole
of sys/resource.h (although the standards in question do allow the
whole of sys/resource.h to be brought in). In the five
bits/resource.h headers, the only variation between the definitions of
struct rusage is that the sysdeps/unix/sysv/linux version is prepared
for x32 (by having anonymous unions with __syscall_slong_t fields) and
the others are not. Thus, this version is suitable for use
generically (everything other than x32 simply has __syscall_slong_t
the same as long int, so there are no API or ABI changes involved, and
anonymous unions are already a required language feature for glibc
headers elsewhere), and this patch uses it as a base for the single
implementation of bits/types/struct_rusage.h.
Stefan Liebler [Mon, 19 Jun 2017 09:06:49 +0000 (11:06 +0200)]
S390: Fix build with gcc configured with --enable-default-pie. [BZ #21537]
Building glibc with gcc configured with --enable-default-pie failed on s390
due to assembler messages:
../sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:44:
Error: junk at end of line, first unrecognized character is `@'
HIDDEN_JUMPTARGET was expanded to exit@PLT@GOTOFF.
If SHARED is not defined, HIDDEN_JUMPTARGET is defined to JUMPTARGET
in sysdeps/s390/s390-32/sysdep.h. There it expanded to exit@PLT
in non SHARED case as PIC is defined if gcc is configured with
--enable-default-pie. Thus I've changed the "ifdef PIC" to "ifdef SHARED"
as we do not want PLTs in the static obj files. I've also changed this
in sysdeps/s390/s390-64/sysdep.h.
I've also adjusted sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S.
If glibc is configured with --disable-hidden-plt, then NO_HIDDEN is defined.
In SHARED case HIDDEN_JUMPTARGET would be expanded to exit@PLT@GOTOFF
instead of __GI_exit@GOTOFF.
Now we jump to:
- __GI_exit if SHARED is defined
- exit@PLT if SHARED and NO_HIDDEN is defined
- exit if both are not defined.
On s390 31bit we have to setup GOT pointer in r12 if we use a PLT stub.
Therefore I use SYSCALL_PIC_SETUP from sysdep.h and added the missing semicolons.
ChangeLog:
[BZ #21537]
* sysdeps/s390/s390-32/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
(SYSCALL_PIC_SETUP): Add missing semicolons.
* sysdeps/s390/s390-64/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
Check SHARED instead of PIC.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
(__makecontext_ret): Adjust code to jump to exit.
Since kernel 2.6.0 all Linux version accept the system call number
in register 1 for svc 0. There is no need to have special handling
that uses EX for system calls < 256. This will simplify and speed
up that code.
A microbenchmark doing "syscall(__NR_getpid);" in a loops gets faster
by ~12%.
* sysdeps/unix/sysv/linux/s390/s390-32/syscall.S: Simplify
code by always using SVC 0 instead of EX.
* sysdeps/unix/sysv/linux/s390/s390-64/syscall.S: Likewise.
Joseph Myers [Fri, 16 Jun 2017 11:09:21 +0000 (11:09 +0000)]
Update timezone code from tzcode 2017b.
This patch updates files coming from tzcode to the versions in tzcode
2017b. A couple of changes to other glibc code are needed.
time/tzset.c was using the SECSPERDAY macro from tzfile.h, which no
longer defines that macro, so a local definition is added to tzset.c.
Because timezone/private.h now defines the _ macro whenever
HAVE_GETTEXT is true, even if it was previously defined, it is also
necessary to avoid a conflict with the definition in
include/libintl.h. Defining _ISOMAC is the obvious way to avoid such
internal definitions being visible, together with defining TZ_DOMAIN
so that zic and zdump continue to get the messages from the libc
domain as desired. However, zic and zdump rely on PKGVERSION and
REPORT_BUGS_TO from config.h, which is not included by default with
_ISOMAC, so -include config.h needs adding to the options for these
programs as well. Together those changes allow unmodified tzcode
2017b sources to work in glibc.
Rical Jasan [Fri, 16 Jun 2017 04:12:39 +0000 (21:12 -0700)]
manual: Replace summary.awk with summary.pl.
The Summary is now generated from @standards, and syntax-checking is
performed. If invalid @standards syntax is detected, summary.pl will
fail, reporting all errors. Failure and error reporting is disabled
for now, however, since much of the manual is still incomplete
wrt. header and standards annotations.
Note that the sorting order of the Summary has changed; summary.pl
respects the locale, like summary.awk did, but the use of LC_ALL=C is
introduced in the Makefile. Other notable deviations are improved
detection of the annotated elements' names, which are used for
sorting, and improved detection of the @node used to reference into
the manual. The most noticeable difference in the rendered Summary is
that entries may now contain multiple lines, one for each header and
standard combination.
summary.pl accepts a `--help' option, which details the expected
syntax of @standards. If errors are reported, the user is directed to
this feature for further information.
Rical Jasan [Mon, 13 Mar 2017 05:30:41 +0000 (22:30 -0700)]
manual: Create empty placeholder macros for @standards.
Header and standards annotations are slated for standardization,
including being rendered in the description of functions, variables,
etc. (elements), and eventually required. This commit adds @standards
dummy macros so we can convert all existing annotations to the new
framework while maintaining the rendered status quo.
There needs to be a way to disambiguate annotations in lists of @*x
elements, where a common description is shared but some elements may
have different headers or standards. The @standardsx macro fills this
role by accepting an additional parameter: the name of the annotated
element.
* manual/macros.texi (@standards): New macro. Provide
placeholder for header and standards annotations.
(@standardsx): New macro. Likewise, for lists of @*x
elements.
This patch consolidates Linux sync_file_range at default
sysdeps/unix/sysv/linux/sync_file_range.c implementation. It also
moves the rules flags from generic io/Makefile to Linux one due the
fact it is a Linux-only symbol.
This patch adds an option to test to add small command line option
through CMDLINE_OPTSTRING define. For instance:
#define CMDLINE_OPTSTRING "vd"
static void
cmdline_process_function (int c)
{
switch (c):
'v':
/* process '-v' option. */
break;
'd':
/* process '-d' option. */
break;
}
#define CMDLINE_PROCESS cmdline_process_function
It will add both '-v' and '-d' along with already default long options.
* support/support_test_main.c (support_test_main): Use optstring
member for option string in getopt_long.
* support/test-driver.c: Add comment about CMDLINE_OPTSTRING.
(CMDLINE_OPTSTRING): New define.
* support/test-driver.h (test_config): Add optstring member.
H.J. Lu [Thu, 15 Jun 2017 15:58:56 +0000 (08:58 -0700)]
x86-64: Implement strcspn/strpbrk/strspn IFUNC selectors in C
Implement strcspn/strpbrk/strspn IFUNC selectors in C
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcspn/strpbrk/strspn functions within libc.
H.J. Lu [Thu, 15 Jun 2017 15:56:48 +0000 (08:56 -0700)]
x86-64: Implement strcat family IFUNC selectors in C
Implement strcat family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcat family functions within libc.
H.J. Lu [Thu, 15 Jun 2017 15:49:43 +0000 (08:49 -0700)]
x86-64: Implement memcmp family IFUNC selectors in C
Implement memcmp family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memcmp family functions within libc.
H.J. Lu [Thu, 15 Jun 2017 15:33:25 +0000 (08:33 -0700)]
x86-64: Implement memset family IFUNC selectors in C
Implement memset family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memset functions within libc.
2017-06-07 H.J. Lu <hongjiu.lu@intel.com>
Erich Elsen <eriche@google.com>
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-sse2-unaligned-erms, and memset_chk-nonshared.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add test for __memset_chk_erms.
Update comments.
* sysdeps/x86_64/multiarch/ifunc-memset.h: New file.
* sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
* sysdeps/x86_64/multiarch/memset.c: Likewise.
* sysdeps/x86_64/multiarch/memset_chk-nonshared.S: Likewise.
* sysdeps/x86_64/multiarch/memset_chk.c: Likewise.
* sysdeps/x86_64/multiarch/memset.S: Removed.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
(__memset_chk_erms): New function.
All of the major architectures are adopting tunables as a way to add
tuning to the library, from hwcap_mask for aarch64 to HLE for s390 and
ifunc and cache geometry for x86. Given this adoption and the fact
that we don't want additional tuning knobs to be added outside of
tunables, it makes sense to enable tunables by default using this
trivial patch.
Smoke tested on x86 to ensure that tunables code was built without
specifying it as a configure flag. I have kept it as --enabled and
not changed it to --disable since we want to still keep the option of
different kinds of front-ends for tunables.
nptl: Invert the mmap/mprotect logic on allocated stacks (BZ#18988)
Current allocate_stack logic for create stacks is to first mmap all
the required memory with the desirable memory and then mprotect the
guard area with PROT_NONE if required. Although it works as expected,
it pessimizes the allocation because it requires the kernel to actually
increase commit charge (it counts against the available physical/swap
memory available for the system).
The only issue is to actually check this change since side-effects are
really Linux specific and to actually account them it would require a
kernel specific tests to parse the system wide information. On the kernel
I checked /proc/self/statm does not show any meaningful difference for
vmm and/or rss before and after thread creation. I could only see
really meaningful information checking on system wide /proc/meminfo
between thread creation: MemFree, MemAvailable, and Committed_AS shows
large difference without the patch. I think trying to use these
kind of information on a testcase is fragile.
The BZ#18988 reports shows that the commit pages are easily seen with
mlockall (MCL_FUTURE) (with lock all pages that become mapped in the
process) however a more straighfoward testcase shows that pthread_create
could be faster using this patch:
--
static const int inner_count = 256;
static const int outer_count = 128;
static
void *thread1(void *arg)
{
return NULL;
}
static
void *sleeper(void *arg)
{
pthread_t ts[inner_count];
for (int i = 0; i < inner_count; i++)
pthread_create (&ts[i], &a, thread1, NULL);
for (int i = 0; i < inner_count; i++)
pthread_join (ts[i], NULL);
return NULL;
}
int main(void)
{
pthread_attr_init(&a);
pthread_attr_setguardsize(&a, 1<<20);
pthread_attr_setstacksize(&a, 1134592);
pthread_t ts[outer_count];
for (int i = 0; i < outer_count; i++)
pthread_create(&ts[i], &a, sleeper, NULL);
for (int i = 0; i < outer_count; i++)
pthread_join(ts[i], NULL);
assert(r == 0);
}
return 0;
}
--
On x86_64 (4.4.0-45-generic, gcc 5.4.0) running the small benchtests
I see:
$ time ./test
real 0m3.647s
user 0m0.080s
sys 0m11.836s
While with the patch I see:
$ time ./test
real 0m0.696s
user 0m0.040s
sys 0m1.152s
So I added a pthread_create benchtest (thread_create) which check
the thread creation latency. As for the simple benchtests, I saw
improvements in thread creation on all architectures I tested the
change.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, sparc64-linux-gnu,
and sparcv9-linux-gnu.
[BZ #18988]
* benchtests/thread_create-inputs: New file.
* benchtests/thread_create-source.c: Likewise.
* support/xpthread_attr_setguardsize.c: Likewise.
* support/Makefile (libsupport-routines): Add
xpthread_attr_setguardsize object.
* support/xthread.h: Add xpthread_attr_setguardsize prototype.
* benchtests/Makefile (bench-pthread): Add thread_create.
* nptl/allocatestack.c (allocate_stack): Call mmap with PROT_NONE and
then mprotect the required area.
H.J. Lu [Wed, 14 Jun 2017 19:10:57 +0000 (12:10 -0700)]
x86-64: Implement memmove family IFUNC selectors in C
Implement memmove family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for memmove family functions within libc.
Florian Weimer [Wed, 14 Jun 2017 06:11:22 +0000 (08:11 +0200)]
i686: Add missing IS_IN (libc) guards to vectorized strcspn
Since commit d957c4d3fa48d685ff2726c605c988127ef99395 (i386: Compile
rtld-*.os with -mno-sse -mno-mmx -mfpmath=387), vector intrinsics can
no longer be used in ld.so, even if the compiled code never makes it
into the final ld.so link. This commit adds the missing IS_IN (libc)
guard to the SSE 4.2 strcspn implementation, so that it can be used from
ld.so in the future.
Zack Weinberg [Tue, 21 Mar 2017 20:30:53 +0000 (16:30 -0400)]
Remove __need macros from errno.h (__need_Emath, __need_error_t).
This is fairly complicated, not because the users of __need_Emath and
__need_error_t have complicated requirements, but because the core
changes had a lot of fallout.
__need_error_t exists for gnulib compatibility in argz.h and argp.h.
error_t itself is a Hurdism, an enum containing all the E-constants,
so you can do 'p (error_t) errno' in gdb and get a symbolic value.
argz.h and argp.h use it for function return values, and they want to
fall back to 'int' when that's not available. There is no reason why
these nonstandard headers cannot just go ahead and include all of
errno.h; so we do that.
__need_Emath is defined only by .S files; what they _really_ need is
for errno.h to avoid declaring anything other than the E-constants
(e.g. 'extern int __errno_location(void);' is a syntax error in
assembly language). This is replaced with a check for __ASSEMBLER__ in
errno.h, plus a carefully documented requirement for bits/errno.h not
to define anything other than macros. That in turn has the
consequence that bits/errno.h must not define errno - fortunately, all
live ports use the same definition of errno, so I've moved it to
errno.h. The Hurd bits/errno.h must also take care not to define
error_t when __ASSEMBLER__ is defined, which involves repeating all of
the definitions twice, but it's a generated file so that's okay.
* stdlib/errno.h: Remove __need_Emath and __need_error_t logic.
Reorganize file. Declare errno here. When __ASSEMBLER__ is
defined, don't declare anything other than the E-constants.
* include/errno.h: Change conditional for exposing internal
declarations to (not _ISOMAC and not __ASSEMBLER__).
* bits/errno.h: Remove logic for __need_Emath. Document
requirements for a port-specific bits/errno.h.
* sysdeps/unix/sysv/linux/bits/errno.h
* sysdeps/unix/sysv/linux/alpha/bits/errno.h
* sysdeps/unix/sysv/linux/hppa/bits/errno.h
* sysdeps/unix/sysv/linux/mips/bits/errno.h
* sysdeps/unix/sysv/linux/sparc/bits/errno.h:
Add multiple-include guard and check against improper inclusion.
Remove __need_Emath logic. Don't declare errno here. Ensure all
constants are defined as simple integer literals. Consistent
formatting.
* sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and
enum __error_t_codes if __ASSEMBLER__ is not defined.
* sysdeps/mach/hurd/bits/errno.h: Regenerate.
* argp/argp.h, string/argz.h: Don't define __need_error_t before
including errno.h.
* sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S
* sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S
* sysdeps/x86_64/fpu/s_cosf.S
* sysdeps/x86_64/fpu/s_sincosf.S
* sysdeps/x86_64/fpu/s_sinf.S:
Just include errno.h; don't define __need_Emath or include
bits/errno.h directly.
Zack Weinberg [Wed, 22 Mar 2017 14:55:38 +0000 (10:55 -0400)]
Remove __need_IOV_MAX and __need_FOPEN_MAX.
__need_FOPEN_MAX wasn't being used anywhere. __need_IOV_MAX was more
complicated; the basic deal is that sys/uio.h wants to define a
constant named UIO_MAXIOV and bits/xopen_lim.h wants to define a
constant named IOV_MAX, with the same meaning. For no apparent reason
this was being handled via bits/stdio_lim.h -- stdio.h is NOT supposed
to define IOV_MAX -- and some mess in Makerules. Also, bits/uio.h on
Linux was being used as a dumping ground for extension functions.
So now we have bits/uio_lim.h, which defines __IOV_MAX.
bits/xopen_lim.h and sys/uio.h use that to define their respective
constants. We also now have bits/uio-ext.h, which is the official
Proper Home for extensions to sys/uio.h. bits/uio.h is removed, and
stdio_lim.h doesn't define IOV_MAX at all.
* include/bits/xopen_lim.h: Use bits/uio_lim.h to get the value
for IOV_MAX.
* misc/Makefile: Install bits/uio-ext.h and bits/uio_lim.h.
Don't install bits/uio.h.
* misc/sys/uio.h: Don't include bits/uio.h. Do include
bits/types/struct_iovec.h and bits/uio_lim.h. Set UIO_MAXIOV
based on __IOV_MAX. Under __USE_GNU, also include bits/uio-ext.h.
* stdio-common/stdio_lim.h.in: Remove logic for __need_FOPEN_MAX
and __need_IOV_MAX. Don't define IOV_MAX at all.
* Makerules (stdio_lim.h): Remove logic for setting IOV_MAX.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h:
Include bits/types/struct_iovec.h, not bits/uio.h.
Use __ssize_t, not ssize_t, in function prototypes.
Don't use hard TAB for double space after period in comments.
Alan Modra [Wed, 14 Jun 2017 01:17:25 +0000 (10:47 +0930)]
PowerPC64 ELFv2 PPC64_OPT_LOCALENTRY
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
Alan Modra [Wed, 14 Jun 2017 01:15:50 +0000 (10:45 +0930)]
PowerPC64 ENTRY_TOCLESS
A number of functions in the sysdeps/powerpc/powerpc64/ tree don't use
or change r2, yet declare a global entry that sets up r2. This patch
fixes that problem, and consolidates the ENTRY and EALIGN macros.
Alan Modra [Wed, 14 Jun 2017 01:14:59 +0000 (10:44 +0930)]
PowerPC64 strncpy, stpncpy and strstr fixes
Makes __stpncpy_power8 call __memset_power8 directly rather than via an
IFUNC. Fixes a missing _mcount, and removes some redundant NOPS. The
*_is_local defines are also used in a followup patch.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Define
MEMSET_is_local.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise.
Define MEMSET.
* sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define
STRLEN_is_local, STRNLEN_is_local, and STRCHR_is_local.
* sysdeps/powerpc/powerpc64/power7/strstr.S: Likewise. Don't add
nop after local calls.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Define MEMSET_is_local.
Don't add nop after local call.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise. Add missing
CALL_MCOUNT.
Alan Modra [Wed, 14 Jun 2017 01:14:03 +0000 (10:44 +0930)]
PowerPC64 sysdep.h tidy
.align on some targets takes a byte alignment, on others like powerpc,
log2 of the byte alignment. It's a good idea to avoid .align,
particularly since x86 and powerpc are different. This patch fixes
the occurrences of .align in powerpc64/sysdep.h, renames DOT_LABEL
since the macro doesn't have anything to do with adding dots, removes
extraneous semicolons, and fixes some formatting.
* sysdeps/powerpc/powerpc64/sysdep.h: Formatting.
(FUNC_LABEL): Rename from DOT_LABEL.
(ENTRY_1): Use FUNC_LABEL and remove leading space from label.
Use .p2align rather than .align.
(TRACEBACK, TRACEBACK_MASK): Use .p2align rather than .align.
(ABORT_TRANSACTION): Likewise.
(ENTRY_1, ENTRY_2, END_2, LOCALENTRY): Remove unnecessary semicolons,
particularly at end. Add semicolon at invocation as necessary.
(TRACEBACK, TRACEBACK_MASK, PSEUDO, PSEUDO_NOERRNO): Likewise.
(PSEUDO_ERRVAL, PPC64_LOAD_FUNCPTR, OPD_ENT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-power8.S (ENTRY,
END): Adjust to suit.
mips: Fix store/load gp registers to/from ucontext_t
General purpose registers in mcontext_t structure
are 8 bytes long for both MIPS32/MIPS64.
get/set/make/swap context implementations for MIPS O32
incorrectly assume that general purpose registers
in this structure are 4 bytes long.
This patch is fixing that.
Tested for MIPS O32 LE and BE.
Compared objdump of modified functions for mips n32 and mips n64.
[BZ #21548]
* sysdeps/unix/sysv/linux/mips/getcontext.S: Define MCONTEXT_SZGREG as
8 and use it when copying general purpose registers.
* sysdeps/unix/sysv/linux/mips/makecontext.S: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Makefile: Include new test for
mips o32.
* sysdeps/unix/sysv/linux/mips/mips32/bug-getcontext-mips-gp.c: Added
new test for mips o32.
* sysdeps/unix/sysv/linux/mips/setcontext.S: Define MCONTEXT_SZGREG as
8 and use it when copying general purpose registers.
* sysdeps/unix/sysv/linux/mips/swapcontext.S: Likewise.
H.J. Lu [Tue, 13 Jun 2017 16:28:14 +0000 (09:28 -0700)]
Make copy of <bits/std_abs.h> from GCC 7 [BZ #21573]
<bits/std_abs.h> from GCC 7 will include /usr/include/stdlib.h from
"#include_next" (instead of stdlib/stdlib.h in the glibc source
directory), and this turns up as a make dependency. Also make a copy
of <bits/std_abs.h> to prevent it from including /usr/include/stdlib.h.
Rafal Luzynski [Tue, 13 Jun 2017 11:20:16 +0000 (07:20 -0400)]
localedata: ce_RU: update weekdays from CLDR [BZ #21207]
[BZ #21207]
* locales/ce_RU (day): Updated (imported) from CLDR. Uppercase letters
left unchanged.
* locales/ce_RU (abday): Minor updates to match (day): Latin uppercase
"I" replaced with Cyrillic "Ó€" ("Palochka", Unicode: U04C0). Trailing
spaces removed.
Zack Weinberg [Sat, 20 May 2017 22:23:01 +0000 (18:23 -0400)]
Remove __need_schedparam and __cpu_set_t_defined.
bits/sched.h has logic to expose only an impl-namespace variant of
struct sched_param (i.e. struct __sched_param), but nothing uses it,
and the only header that includes bits/sched.h is sched.h. The
__need_schedparam logic can therefore be removed.
bits/sched.h also has a great deal of code relating to cpu_set_t
objects that was *almost* the same between the two versions of
bits/sched.h in the tree; a little spelunking indicated that this is
because some bug fixes got applied to the Linux-specific bits/sched.h
but not the generic one. Introduce a new header, bits/cpu-set.h,
containing the version of that code with the bugfixes, have sched.h
include it directly, and delete all of the code from both versions of
bits/sched.h.
Also remove the unnecessary name mangling in the definition of struct
sched_param -- POSIX specifies a field 'sched_priority', so there is
no reason to define it as '__sched_priority' and then paper over that
with a macro. (Just in case someone was using the internal name,
'sched_priority' remains a macro defined to expand to itself, and
'__sched_priority' now expands to 'sched_priority'.)
Finally, as long as I'm touching these files anyway, merge new
constants from linux/sched.h into the Linux bits/sched.h.
* bits/sched.h: Remove __need_schedparam logic and replace with a
normal multiple-include guard. Change field name in struct
sched_param from __sched_priority to sched_priority. Delete
everything under #ifndef __cpu_set_t_defined.
* sysdeps/unix/sysv/linux/bits/sched.h: Likewise. Also sync with
kernel sched.h, adding SCHED_ISO and SCHED_DEADLINE constants.
* posix/sched.h: Include bits/cpu-set.h as well as bits/sched.h.
For compatibility, #define sched_priority to itself, and #define
__sched_priority as sched_priority.
* posix/bits/cpu-set.h: New file containing, verbatim, the code
that was under #ifndef __cpu_set_t_defined in
sysdeps/unix/sysv/linux/bits/sched.h.
* include/bits/cpu-set.h: New wrapper.
* posix/Makefile: Install bits/cpu-set.h.
Allow macros prefixed with FLT128 in include/float.h
TS 18661-3 specifies that macros prefixed with FLTN_ can be defined in
float.h, only if __STDC_WANT_IEC_60559_TYPES_EXT__ is defined as a macro
before the inclusion of float.h. Since GCC 7.0, these macros are provided
under this condition, however, for older versions of GCC, these macros are
not provided at all. This patch allows the definitions of such macros in
include/float.h for older compilers, if the condition above is met, and
even if _ISOMAC is defined.
* include/float.h: Allow the definition of macros prefixed with
FLT128 even if _ISOMAC is defined, but provided that
__STDC_WANT_IEC_60559_TYPES_EXT__ is defined as a macro.
float128: Add strfromf128, strtof128, and wcstof128 to the manual
* manual/math.texi (Mathematics): Add description for _FloatN and
_FloatNx types and mentions that they are not support in glibc for
any architecture, so far.
* manual/arith.texi (wcstof, wcstold): Replace the mention to
stdlib.h with wchar.h.
(Parsing of Floats): Add descriptions for strtofN and wcstofN.
(Printing of Floats): Add description for strfromfN.
Paul E. Murphy [Mon, 25 Jul 2016 18:10:00 +0000 (13:10 -0500)]
float128: Add strtof128, wcstof128, and related functions.
The implementations are contained with sysdeps/ieee754/float128 as
they are only built when _Float128 is enabled within libc/m.
* include/gmp.h (__mpn_construct_float128): New declaration.
* include/stdlib.h: Include bits/floatn.h for _Float128 tests.
(__strtof128_l): New declaration.
(__strtof128_nan): Likewise.
(__wcstof128_nan): Likewise.
(__strtof128_internal): Likewise.
(____strtof128_l_internal): Likewise.
* include/wchar.h: Include bits/floatn.h for _Float128 tests.
(__wcstof128_l): New declaration.
(__wcstof128_internal): Likewise.
* stdlib/Makefile (bug-strtod2): Link libm too.
* stdlib/stdlib.h (strtof128): New declaration.
(strtof128_l): Likewise.
* stdlib/tst-strtod-nan-locale-main.c: Updated to use
tst-strtod.h macros to ensure float128 gets tested too.
* stdlib/tst-strtod-round-skeleton.c (CHOOSE_f128): New macro.
* stdlib/tst-strtod.h: Include bits/floatn.h for _Float128
tests.
(IF_FLOAT128): New macro.
(GEN_TEST_STRTOD): Update to optionally include _Float128 in
the tests.
(STRTOD_TEST_FOREACH): Likewise.
* sysdeps/ieee754/float128/Makefile: Insert new strtof128 and
wcstof128 functions into libc.
* sysdeps/ieee754/float128/Versions: Add exports for the above
new functions.
* sysdeps/ieee754/float128/mpn2float128.c: New file.
* sysdeps/ieee754/float128/strtod_nan_float128.h: New file.
* sysdeps/ieee754/float128/strtof128.c: New file.
* sysdeps/ieee754/float128/strtof128_l.c: New file.
* sysdeps/ieee754/float128/strtof128_nan.c: New file.
* sysdeps/ieee754/float128/wcstof128.c: New file.
* sysdeps/ieee754/float128/wcstof128_l.c: New file.
* sysdeps/ieee754/float128/wcstof128_nan.c: New fike.
* wcsmbs/Makefile: (CFLAGS-wcstof128.c): Append strtox-CFLAGS.
(CFLAGS-wcstof128_l): Likewise.
* wcsmbs/wchar.h: Include bits/floatn.h for _Float128 tests.
(wcstof128): New declaration.
(wcstof128_l): Likewise.
Joseph Myers [Mon, 12 Jun 2017 17:39:47 +0000 (17:39 +0000)]
Fix XPG4 bsd_signal namespace (bug 21552).
bsd_signal was added in XPG4.2, so should be declared for
__USE_XOPEN_EXTENDED, instead of the present __USE_XOPEN condition.
This patch fixes the condition accordingly.
Tested for x86_64.
[BZ #21552]
* signal/signal.h (bsd_signal): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
* conform/Makefile (test-xfail-XPG4/signal.h/conform): Remove.
Joseph Myers [Mon, 12 Jun 2017 17:38:20 +0000 (17:38 +0000)]
Fix sigwait namespace (bug 21550).
sigwait was added to POSIX in 1995; it is not in older POSIX versions
or XPG4 / XPG4.2. Thus it should be declared only if
__USE_POSIX199506; signal.h wrongly declares it for __USE_POSIX.
(sigwaitinfo is correctly conditioned on __USE_POSIX199309.) This
patch fixes the condition on the declaration of sigwait.
Tested for x86_64. Because of other namespace problems this does not
allow any conform/ XFAILs to be removed.
[BZ #21550]
* signal/signal.h (sigwait): Only declare if [__USE_POSIX199506].
H.J. Lu [Mon, 12 Jun 2017 16:05:57 +0000 (09:05 -0700)]
x86-64: Implement strcpy family IFUNC selectors in C
Implement strcpy family IFUNC selectors in C.
All internal calls within libc.so can use IFUNC on x86-64 since unlike
x86, x86-64 supports PC-relative addressing to access the GOT entry so
that it can call via PLT without using an extra register. For libc.a,
we can't use IFUNC for functions which are called before IFUNC has been
initialized. Use IFUNC internally reduces the icache footprint since
libc.so and other codes in the process use the same implementations.
This patch uses IFUNC for strcpy family functions within libc.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strcpy-sse2 and stpcpy-sse2.
* sysdeps/x86_64/multiarch/ifunc-unaligned-ssse3.h: New file.
* sysdeps/x86_64/multiarch/stpcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpncpy.c: Likewise.
* sysdeps/x86_64/multiarch/strcpy-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.c: Likewise.
* sysdeps/x86_64/multiarch/strncpy.c: Likewise.
* sysdeps/x86_64/multiarch/stpcpy.S: Removed.
* sysdeps/x86_64/multiarch/stpncpy.S: Likewise.
* sysdeps/x86_64/multiarch/strcpy.S: Likewise.
* sysdeps/x86_64/multiarch/strncpy.S: Likewise.
* sysdeps/x86_64/multiarch/stpncpy-c.c (weak_alias): New.
(libc_hidden_def): Always defined as empty.
* sysdeps/x86_64/multiarch/strncpy-c.c (libc_hidden_builtin_def):
Always Defined as empty.
Wilco Dijkstra [Mon, 12 Jun 2017 14:19:38 +0000 (15:19 +0100)]
2017-06-12 Wilco Dijkstra <wdijkstr@arm.com>
There is no longer a need for string2.h, so remove it and all mention of it.
Move the redirect for __stpcpy to include/string.h since it is still required
until all internal uses have been renamed.
This fixes several linknamespace/localplt failures when building with -Os.
[BZ #15105]
[BZ #19463]
* include/string.h: Add internal redirect for __stpcpy.
* string/Makefile: Remove bits/string2.h.
* string/string.h: Update comment.
* string/string-inlines.c: Remove bits/string2.h include and comment.
* string/bits/string2.h: Remove file.
Wilco Dijkstra [Mon, 12 Jun 2017 13:56:53 +0000 (14:56 +0100)]
Replace all internal uses of __bzero with memset. This removes the need
to redirect it to a builtin and means memset is inlined whenever possible,
including with -Os.
Paul Clarke [Fri, 9 Jun 2017 17:36:22 +0000 (14:36 -0300)]
powerpc: add sysconf support for cache geometries
There is currently no "cross-platform" (x86 and POWER) support for
determining the cacheline size.
This patch adds support to sysconf() to correctly report cacheline sizes
based on the information in the auxilliary vector.
Thus, using sysconf() is a cross-platform (x86 and POWER) solution for
determining cacheline sizes.
Support is added (on powerpc) for:
_SC_LEVEL1_ICACHE_SIZE _SC_LEVEL1_ICACHE_ASSOC _SC_LEVEL1_ICACHE_LINESIZE
_SC_LEVEL1_DCACHE_SIZE _SC_LEVEL1_DCACHE_ASSOC _SC_LEVEL1_DCACHE_LINESIZE
_SC_LEVEL2_CACHE_SIZE _SC_LEVEL2_CACHE_ASSOC _SC_LEVEL2_CACHE_LINESIZE
_SC_LEVEL3_CACHE_SIZE _SC_LEVEL3_CACHE_ASSOC _SC_LEVEL3_CACHE_LINESIZE
* sysdeps/unix/sysv/linux/powerpc/sysconf.c: New file.
Add powerpc-specific overrides for L1, L2, L3 CACHE_SIZEs,
CACHE_ASSOCs, and CACHE_LINESIZEs, retrieving from auxv.
* sysdeps/unix/sysv/linux/powerpc/test-powerpc-linux-sysconf.c:
New file. Invoke newly supported sysconf values for powerpc,
and report results. If none are supported, report so.
* sysdeps/unix/sysv/linux/powerpc/Makefile (tests): Add new test,
tst-sysconf.
Joseph Myers [Fri, 9 Jun 2017 16:28:07 +0000 (16:28 +0000)]
Fix waitid namespace (bug 21561).
In sys/wait.h, waitid and associated constants and types are UX-shaded
in XPG4.2 (so not in XPG4), and XSI-shaded in POSIX before 2008, so
should be appropriately conditional in the headers. This patch fixes
the conditionals accordingly. (WCONTINUED is actually still
XSI-shaded in POSIX.1:2008, but W* is also reserved there without
XSI-shading, so nothing special needs to be done about the
conditionals on WCONTINUED to conform to POSIX.1:2008 namespace
rules.)
Joseph Myers [Fri, 9 Jun 2017 16:26:06 +0000 (16:26 +0000)]
Update nios2, sparc32 localplt.data files for recent GCC change.
A recent GCC change to expand floating-point classification built-in
functions inline using integer rather than floating-point arithmetic
in some cases resulted in localplt test failures for nios2 and sparc32
<https://sourceware.org/ml/libc-testresults/2017-q2/msg00320.html>.
This patch updates the localplt.data files in question to mark the
relevant symbols as optional / add a new optional symbol. (The GCC
patch has been reverted because of other problems it caused, but one
can assume it will be applied again, without changes that would affect
the PLT entries generated, once those issues have been resolved.)
Joseph Myers [Fri, 9 Jun 2017 13:49:10 +0000 (13:49 +0000)]
Fix sigpause namespace (bug 21554).
The sigpause function is declared for __USE_XOPEN. As it's new in
XPG4.2 it should be declared only for __USE_XOPEN_EXTENDED. This
patch fixes the declaration accordingly.
Tested for x86_64.
[BZ #21554]
* signal/signal.h (sigpause):: Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
Joseph Myers [Fri, 9 Jun 2017 13:45:37 +0000 (13:45 +0000)]
Condition signal.h inclusion in sys/wait.h (bug 21560).
sys/wait.h includes signal.h unconditionally. But the permission to
do so is UX-shaded in XPG4.2, and XSI-shaded in POSIX before 2008, so
this should not be unconditional. This patch fixes this
conservatively: the include is kept, but conditioned on the standards
that permit it (meaning it is still present by default, because
non-XSI POSIX.1:2008 is enabled by default). <bits/types.h> is now
included unconditionally to provide the required definition of
__pid_t; it was previously included via <signal.h>. Some standards
require pid_t to be defined here, and all allow it to be defined here;
previously defined via <signal.h>, it's now defined directly in this
header.
Tested for x86_64. This does not fix any of the sys/wait.h
conformtest failures, but substantially reduces the number of
namespace failures for sys/wait.h for XPG4 and POSIX.
[BZ #21560]
* posix/sys/wait.h: Condition include of <signal.h> on
[__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. Include <bits/types.h>
unconditionally.
[!__pid_t_defined] (pid_t): Define typedef.
Zack Weinberg [Fri, 9 Jun 2017 13:32:43 +0000 (09:32 -0400)]
Polish the treatment of dl-tunable-list.h in Makeconfig.
Like basically all before-compile headers, dl-tunable-list.h should be
generated using a stamp file to minimize unnecessary rebuilding; it
wasn't being added to common-generated, so it wouldn't get cleaned up;
and it was in between the rules for libc-modules.h/.stmp and their own
addition to common-generated.
* Makeconfig (dl-tunable-list.h): Generate using a stamp file.
(common-generated): Add libc-modules.h and libc-modules.stmp in a
more appropriate location. Also add dl-tunable-list.h and
dl-tunable-list.stmp.
H.J. Lu [Fri, 9 Jun 2017 12:45:43 +0000 (05:45 -0700)]
x86-64: Optimize strrchr/wcsrchr with AVX2
Optimize strrchr/wcsrchr with AVX2 to check 32 bytes with vector
instructions. It is as fast as SSE2 version for small data sizes
and up to 1X faster for large data sizes on Haswell. Select AVX2
version on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strrchr-sse2, strrchr-avx2, wcsrchr-sse2 and wcsrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strrchr_avx2,
__strrchr_sse2, __wcsrchr_avx2 and __wcsrchr_sse2.
* sysdeps/x86_64/multiarch/strrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/strrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strrchr.c: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsrchr.c: Likewise.
H.J. Lu [Fri, 9 Jun 2017 12:44:30 +0000 (05:44 -0700)]
x86-64: Optimize memrchr with AVX2
Optimize memrchr with AVX2 to search 32 bytes with a single vector
compare instruction. It is as fast as SSE2 memrchr for small data
sizes and up to 1X faster for large data sizes on Haswell. Select
AVX2 memrchr on AVX2 machines where vzeroupper is preferred and AVX
unaligned load is fast.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memrchr-sse2 and memrchr-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __memrchr_avx2 and
__memrchr_sse2.
* sysdeps/x86_64/multiarch/memrchr-avx2.S: New file.
* sysdeps/x86_64/multiarch/memrchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memrchr.c: Likewise.
H.J. Lu [Fri, 9 Jun 2017 12:42:16 +0000 (05:42 -0700)]
x86-64: Optimize strchr/strchrnul/wcschr with AVX2
Optimize strchr/strchrnul/wcschr with AVX2 to search 32 bytes with vector
instructions. It is as fast as SSE2 versions for size <= 16 bytes and up
to 1X faster for or size > 16 bytes on Haswell. Select AVX2 version on
AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
H.J. Lu [Fri, 9 Jun 2017 12:18:03 +0000 (05:18 -0700)]
x86-64: Optimize strlen/strnlen/wcslen/wcsnlen with AVX2
Optimize strlen/strnlen/wcslen/wcsnlen with AVX2 to check 32 bytes with
a single vector compare instruction. It is as fast as SSE2 versions for
size <= 16 bytes and up to 1X faster for or size > 16 bytes on Haswell.
Select AVX2 version on AVX2 machines where vzeroupper is preferred and
AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
strlen-sse2, strnlen-sse2, strlen-avx2, strnlen-avx2,
wcslen-sse2, wcslen-avx2 and wcsnlen-avx2.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add tests for __strlen_avx2,
__strlen_sse2, __strnlen_avx2, __strnlen_sse2, __wcslen_avx2,
__wcslen_sse2 and __wcsnlen_avx2.
* sysdeps/x86_64/multiarch/strlen-avx2.S: New file.
* sysdeps/x86_64/multiarch/strlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strlen.c: Likewise.
* sysdeps/x86_64/multiarch/strnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/strnlen.c: Likewise.
* sysdeps/x86_64/multiarch/wcslen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wcslen.c: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wcsnlen.c (OPTIMIZE (avx2)): New.
(IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
H.J. Lu [Fri, 9 Jun 2017 12:13:15 +0000 (05:13 -0700)]
x86-64: Optimize memchr/rawmemchr/wmemchr with SSE2/AVX2
SSE2 memchr is extended to support wmemchr. AVX2 memchr/rawmemchr/wmemchr
are added to search 32 bytes with a single vector compare instruction.
AVX2 memchr/rawmemchr/wmemchr are as fast as SSE2 memchr/rawmemchr/wmemchr
for small sizes and up to 1.5X faster for larger sizes on Haswell and
Skylake. Select AVX2 memchr/rawmemchr/wmemchr on AVX2 machines where
vzeroupper is preferred and AVX unaligned load is fast.
NB: It uses TZCNT instead of BSF since TZCNT produces the same result
as BSF for non-zero input. TZCNT is faster than BSF and is executed
as BSF if machine doesn't support TZCNT.
* sysdeps/x86_64/memchr.S (MEMCHR): New. Depending on if
USE_AS_WMEMCHR is defined.
(PCMPEQ): Likewise.
(memchr): Renamed to ...
(MEMCHR): This. Support wmemchr if USE_AS_WMEMCHR is defined.
Replace pcmpeqb with PCMPEQ.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memchr-sse2, rawmemchr-sse2, memchr-avx2, rawmemchr-avx2,
wmemchr-sse4_1, wmemchr-avx2 and wmemchr-c.
* sysdeps/x86_64/multiarch/ifunc-avx2.h: New file.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/memchr.c: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/rawmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-avx2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr-sse2.S: Likewise.
* sysdeps/x86_64/multiarch/wmemchr.c: Likewise.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Test __memchr_avx2, __memchr_sse2,
__rawmemchr_avx2, __rawmemchr_sse2, __wmemchr_avx2 and
__wmemchr_sse2.
Florian Weimer [Fri, 9 Jun 2017 12:08:13 +0000 (14:08 +0200)]
support: Expose TEST_VERIFY_EXIT behavior to GCC optimizers
Previously, the implementation would conditionally exit based on the
status argument, which GCC did not know about. This leads to
false uninitialized variable warnings when data is accessed after a
TEST_VERIFY_EXIT failure (from code which would never execute).
Joseph Myers [Thu, 8 Jun 2017 22:34:58 +0000 (22:34 +0000)]
conformtest: Correct sys/wait.h expectations for XPG4.
This patch corrects the conformtest expectations for sys/wait.h for
XPG4. This does not change the test results for this header at the
makefile level since it fixes some spurious failures for this header
while introducing other failures previously hidden by incorrect
expectations. However, it shows up issues with stdlib.h for XPG4
defining W* names that are not permitted in this case (previously
wrongly allowed; the W* reservation is UX-shaded in XPG4.2 /
XSI-shaded in POSIX before 2008); that test is thus XFAILed.
Tested for x86_64.
* conform/data/sys/wait.h-data (WIFCONTINUED): Do not expect for
[XPG4].
(WEXITED): Likewise.
(WSTOPPED): Likewise.
(WCONTINUED): Likewise.
(WNOHANG): Likewise.
(WNOWAIT): Likewise.
(idtype_t): Likewise.
(P_ALL): Likewise.
(P_PID): Likewise.
(P_PGID): Likewise.
(id_t): Likewise.
(siginfo_t): Likewise.
(wait3): Likewise.
(waitid): Likewise.
(signal.h): Do not allow header for [XPG4].
(sys/resource.h): Likewise.
(si_*): Do not allow for [XPG4].
(W*): Likewise.
(P_*): Likewise.
(BUS_): Likewise.
(CLD_): Likewise.
(FPE_): Likewise.
(ILL_): Likewise.
(POLL_): Likewise.
(SEGV_): Likewise.
(SI_): Likewise.
(TRAP_): Likewise.
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): New
variable.
H.J. Lu [Thu, 8 Jun 2017 16:55:48 +0000 (09:55 -0700)]
Add more tests for memchr
This patch adds tests for len == 0 and tests for positions close to the
beginning, which are equivalent to positions close to the end for memchr.
* string/test-memrchr.c (test_main): Add tests for len == 0
and tests for positions close to the beginning, which are
equivalent to positions close to the end for memchr.
Add strfromf128 to stdlib when _Float128 support is enabled.
* stdio-common/printf-parsemb.c (__parse_one_specmb): Initialize
spec->info.is_binary128 to zero.
* stdio-common/printf.h (printf_info): Add new member is_binary128
to indicate that the number being converted to string is compatible
with the IEC 60559 binary128 format.
* stdio-common/printf_fp.c (__printf_fp_l): Add code to deal with
_Float128 numbers.
* stdio-common/printf_fphex.c: Include ieee754_float128.h and
ldbl-128/printf_fphex_macros.h
(__printf_fphex): Add code to deal with _Float128 numbers.
* stdio-common/printf_size.c (__printf_size): Likewise.
* stdio-common/vfprintf.c (process_arg): Initialize member
info.is_binary128 to zero.
* stdlib/fpioconst.h (FLT128_MAX_10_EXP_LOG): New macro.
* stdlib/stdlib.h: Include bits/floatn.h for _Float128 support.
(strfromf128): New declaration.
* stdlib/strfrom-skeleton.c (STRFROM): Set member info.is_binary128
to one.
* sysdeps/ieee754/float128/Makefile: Add strfromf128.
* sysdeps/ieee754/float128/Versions: Likewise.
* sysdeps/ieee754/float128/strfromf128.c: New file.
Refactor PRINT_FPHEX_LONG_DOUBLE into a reusable macro
This patch refactors the macro PRINT_FPHEX_LONG_DOUBLE from the file
sysdeps/ieee754/ldbl-128/printf_fphex.c into a function-like macro to
enable its use for both long double and _Float128, when they are
ABI-distinct.
* sysdeps/ieee754/ldbl-128/printf_fphex.c: Include
ldbl-128/printf_fphex_macros.h for the definition of PRINT_FPHEX.
(PRINT_FPHEX_LONG_DOUBLE): Define based on PRINT_FPHEX.
* sysdeps/ieee754/ldbl-128/printf_fphex_macros.h
(PRINT_FPHEX): New function-like macro that can be used for long
double, as well as for _Float128
Remove duplicated code from __printf_fp_l, __printf_fphex, and __printf_size
In __printf_fp_l, __printf_fphex, and __printf_size the blocks of code that are
used to read a double or long double argument, check for special values and
convert to multiprecision are similar. When adding float128 support to libc,
more code would be duplicated to deal with the extra type. This patch moves
the repetitive code to a macro which is now used by double and long double and
will be used for float128 when support is added, thus avoiding more
duplication.
Tested for powerpc64le and s390x.
* stdio-common/printf_fp.c (PRINTF_FP_FETCH): New macro.
(__printf_fp_l): Use the new macro to avoid duplicating code.
* stdio-common/printf_fphex.c (PRINTF_FPHEX_FETCH): New macro.
(__printf_fphex): Use the new macro to avoid duplicating code.
* stdio-common/printf_size.c (PRINTF_SIZE_FETCH): New macro.
(__printf_size): Use the new macro to avoid duplicating code.
Reuse the code for __mpn_extract_long_double to implement
__mpn_extract_float128.
* include/gmp.h: Include bits/floatn.h
(__mpn_extract_float128): Declare when __HAVE_DISTINCT_FLOAT128 is 1.
* stdlib/gmp-impl.h: Also check if alloca is not defined before
including stack-alloc.h. It could have been defined by other header
which not necessarily defines HAVE_ALLOCA.
* sysdeps/ieee754/float128/Makefile: New file.
* sysdeps/ieee754/float128/float1282mpn.c: New file.
* sysdeps/ieee754/float128/float128_private.h: Include gmp.h before
redefining __mpn_extract_long_double to __mpn_extract_float128, then
redefine __mpn_extract_long_double to __mpn_extract_float128.
* sysdeps/ieee754/ldbl-128/ldbl2mpn.c: Replace long double with
_Float128 to allow float128_private.h overrides.
Paul E. Murphy [Fri, 4 Nov 2016 11:57:27 +0000 (09:57 -0200)]
float128: Extend the power of ten tables
Update the power of ten tables used by the common implementation when long
double is not the most expressive real type.
* stdlib/fpioconst.h: Include bits/floatn.h.
(FPIOCONST_HAVE_EXTENDED_RANGE): New macro for testing how big the
power of ten table should be.
(FPIOCONST_POW10_ARRAY_SIZE): Use larger table if above is true.
* stdlib/fpioconst.c (__tens): Use FPIOCONST_HAVE_EXTENDED_RANGE
to include larger tables when _Float128 support is enabled.
(_fpioconst_pow10): Likewise.
Joseph Myers [Wed, 7 Jun 2017 17:59:50 +0000 (17:59 +0000)]
Fix include paths in include/bits/types/*.h.
Various include/bits/types/*.h files do
where the path specified is relative to the toplevel glibc source
directory.
That has the wrong number of ../ components to achieve the desired
effect; it actually searches relative to include/ for a file that does
not exist there, then goes on to search the #include <> paths
specified with -I, eventually finding the desired file via such a path
(e.g. sysdeps/nptl/) with the right number of directory components.
Before that it searches include/../.. because of the -Iinclude,
meaning that an appropriately named file outside the glibc source tree
can affect the build.
This patch changes all those files to do #include <path> without the
../../, as some such files already do.
git://sourceware.org / glibc.git / log