This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default
for both gmon and debug implementations. This allows simplify
profil-counter.h on Linux to use a single implementation and remove the
requirements for newer ports to redefine __sigaction/sigaction to use
SA_SIGINFO.
The GET_PC macro is also replaced with a function sigcontext_get_pc that
returns an uintptr_t instead of a void pointer. It allows easier convertion
to integer on ILP32 architecture, such as x32, without the need to suppress
compiler warnings.
The patch also requires some refactor of register-dump.h file for some
architectures (to reflect it is now called from a sa_sigaction instead of
sa_handler signal context).
- Alpha, i386, and s390 are straighfoward to take in consideration the
new argument type.
- ia64 takes in consideration the kernel pass a struct sigcontextt
as third argument for sa_sigaction.
- sparc take in consideration the kernel pass a pt_regs struct
as third argument for sa_sigaction.
- m68k dummy function is removed and the FP state is dumped on
register_dump itself.
- For SH the register-dump.h file is consolidate on a common implementation
and the floating-point state is checked based on ownedfp field.
The register_dump does not change its output format in any affected
architecture.
I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
I also checked the libSegFault.so through catchsegv on alpha-linux-gnu,
m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed.
It was previously stated
<https://sourceware.org/ml/libc-alpha/2018-05/msg00771.html> that "It
should fail to indicate you have bugs in your system libidn.".
However, the glibc testsuite should be indicating whether there are
bugs in glibc, not whether there are bugs in other system pieces - so
unless you consider it a glibc bug that it fails to work around the
libidn issues, these FAILs are not helpful. And as a general
principle, it's best for the expected glibc test results to be clean,
with Bugzilla used to track known bugs in glibc itself, rather than
people needing to know about the expected FAILs to tell if there are
problems with their glibc build. So, while there is an argument that
install.texi (not just the old NEWS entries for 2.28) should explain
the use of libidn2 and that 2.0.5 or later is recommended, test FAILs
are not the right way to indicate the presence of an old libidn2
version.
This patch accordingly makes those tests return UNSUPPORTED for older
libidn2 versions, just as they do when libidn2 isn't present at all.
As implied by that past discussion, it's possible this could result in
UNSUPPORTED for systems with older versions but whatever required
fixes backported so the tests previously passed, if there are any such
systems.
Tested for x86_64 on Ubuntu 18.04, including verifying that putting an
earlier version in place of 2.0.5 results in the tests FAILing whereas
using 2.0.5 as in the patch results in UNSUPPORTED. Florian reports
that the tests still run on Fedora 30, with libidn 2.2.0.
* resolv/tst-resolv-ai_idn-latin1.c (do_test): Mark test
unsupported with libidn2 before 2.0.5.
* resolv/tst-resolv-ai_idn.c (do_test): Likewise.
Joseph Myers [Thu, 22 Aug 2019 12:38:40 +0000 (12:38 +0000)]
Document strftime %Ob and %OB as C2X features.
C2X standardizes strftime %Ob and %OB support. This patch updates the
glibc manual to say these are C2X features, while noting that the
details of what is the alternative form of a month name are not
specified in C2X.
Note: C2X seems unclear to me about whether %h being equivalent to %b
means %Oh is thereby allowed and equivalent to %Ob; I've asked WG14.
Tested with "make info" and "make pdf".
* manual/time.texi (strftime): Document %Ob and %OB as C2X
features.
Paul Eggert [Wed, 21 Aug 2019 16:25:22 +0000 (09:25 -0700)]
Fix bad pointer / leak in regex code
This was found by Coverity (CID 1484201). [BZ#24844]
* posix/regex_internal.c (create_cd_newstate): Fix use of bad
pointer and/or memory leak when storage is exhausted.
Zack Weinberg [Sat, 17 Aug 2019 01:10:11 +0000 (21:10 -0400)]
Don't use the argument to time.
It doesn't make sense to remove all the internal uses of time.
It's still a standard ISO C function, and its callers don't need
sub-second resolution and would be unnecessarily complicated if
they had to declare a struct timespec instead of just a time_t.
However, a handful of places were using the vestigial "result"
argument instead of the return value, which is slightly less
efficient and also looks strange. Correct this.
* misc/syslog.c (__vsyslog_internal)
* time/getdate.c (__getdate_r)
* time/tst_wcsftime.c (main):
Use return value of time, not its argument.
* string/strfry.c (strfry)
* sysdeps/mach/sleep.c (__sleep):
Remove unnecessary casts of NULL in calls to time.
Joseph Myers [Wed, 21 Aug 2019 12:06:44 +0000 (12:06 +0000)]
Add tgmath.h macros for narrowing functions.
When adding some of the TS 18661 narrowing functions for glibc 2.28, I
deferred adding corresponding <tgmath.h> support because of unresolved
questions about the specification for those type-generic macros,
especially in relation to _FloatN and _FloatNx types.
Those issues are now clarified in the response to Clarification
Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h
support. As with other tgmath.h macros, there are fairly
straightforward implementations based on __builtin_tgmath for GCC 8
and later, which result in exactly the right function being called in
each case, and more complicated implementations for GCC 7 and earlier,
which generally result in a function being called whose arguments have
the right format (i.e. an alias for the right function), but which
might not be exactly the function name specified by TS 18661.
In one case with older compilers (f32x* macros, where the type
_Float64x exists and all the arguments have type _Float32 or
_Float32x), there is a further relaxation and the function called may
have arguments narrower than the one specified by the TS, but still
wide enough to represent the arguments exactly, so the result of the
call is unchanged (as this does not affect any case where rounding of
integer arguments might be involved). With GCC 6 or before this is
inherently unavoidable (but still harmless and not detectable by how
the compiled program behaves, unless it redefines the functions in
question like the testcases do) because _Float32x and _Float64 are
both typedefs for double in that case but the specified semantics
result in different functions, with different argument formats, being
called for those two argument types.
Tests for the new macros are handled through gen-tgmath-tests.py,
which deals with the special-case handling for older GCC.
Tested as follows: with the full glibc testsuite on x86_64 and x86
(with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with
GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9).
Carlos O'Donell [Thu, 21 Mar 2019 02:11:32 +0000 (22:11 -0400)]
nscd: Improve nscd.conf comments.
This change adds a warning to nscd.conf about running multiple caching
services together and that it may lead to unexpected behaviours. Also we
add a note that enabling the 'shared' option will cause cache hit rates
to be misreported (a side effect of the implementation).
v2
- Rewrite comment to avoid implementation details.
Carlos O'Donell [Wed, 20 Mar 2019 16:40:18 +0000 (12:40 -0400)]
nss: Make nsswitch.conf more distribution friendly.
The current default nsswitch.conf file provided by glibc is not very
distribution friendly. The file contains some minimal directives that no
real distribution uses. This update aims to provide a rich set of
comments which are useful for all distributions, and a broader set of
service defines which should work for all distributions.
Tested defaults on x86_64 and they work. The nsswitch.conf file more
closely matches what we have in Fedora now, and I'll adjust Fedora to
use this version with minor changes to enable Fedora-specific service
providers.
v2
- Add missing databases to manual.
- Add link to manual from default nsswitch.conf.
- Sort nsswitch.conf according to most used database first.
v3
- Only mention implemented services in 'NSS Basics.'
- Mention 'automount' in 'Services in the NSS configuration.'
- Sort services in alphabetical order.
v4
- Project name is 'Samba'.
v5
- Fix typo in manual/nss.texi.
v6
- Fix another typo in manual/nss.texi. Ran spell checker this time.
Florian Weimer [Mon, 19 Aug 2019 13:41:29 +0000 (15:41 +0200)]
Do not print backtraces on fatal glibc errors
If the process is in a bad state, we used to print backtraces in
many cases. This is problematic because doing so could involve
a lot of work, like loading libgcc_s using the dynamic linker,
and this could itself be targeted by exploit writers. For example,
if the crashing process was forked from a long-lived process, the
addresses in the error message could be used to bypass ASLR.
Commit ed421fca42fd9b4cab7c66e77894b8dd7ca57ed0 ("Avoid backtrace from
__stack_chk_fail [BZ #12189]"), backtraces where no longer printed
because backtrace_and_maps was always called with do_abort == 1.
Rather than fixing this logic error, this change removes the backtrace
functionality from the sources. With the prevalence of external crash
handlers, it does not appear to be particularly useful. The crash
handler may also destroy useful information for debugging.
Joseph Myers [Fri, 16 Aug 2019 19:23:30 +0000 (19:23 +0000)]
Correct TEST_COMPAT conditions in totalorder compat tests.
I noticed that the totalorder compat tests mixed TEST_COMPAT
conditions using COMPAT_VER (computed as the first symbol version for
the symbol being tested) and those with a hardcoded GLIBC_2_25.
COMPAT_VER is logically correct here, so this patch changes the tests
to use it. GLIBC_2_25 is harmless at present (even for _FloatN /
_FloatNx functions added in later glibc versions). However, if in
future we support _Float16 functions in glibc for any existing
configuration, the test using GLIBC_2_25 would get things wrong
(wrongly think that there are compat versions of totalorderf16 and
totalordermagf16 to test).
(The actual definitions of the compat / versioned symbols for the
totalorder functions make no attempt to deal with the possibility of
libm function support for a new floating-point format, already
supported for other architectures in glibc, being added in some glibc
configuration in future, for which the only vaguely plausible case
would be if some architecture gets _Float128 support it previously
lacked; this is much like functions added after glibc 2.4 not
generally attempting to deal with compat support for long double
changing away from having the same format as double.)
Florian Weimer [Thu, 15 Aug 2019 12:37:50 +0000 (14:37 +0200)]
elf: Self-dlopen failure with explict loader invocation [BZ #24900]
In case of an explicit loader invocation, ld.so essentially performs
a dlopen call to load the main executable. Since the pathname of
the executable is known at this point, it gets stored in the link
map. In regular mode, the pathname is not known and "" is used
instead.
As a result, if a program calls dlopen on the pathname of the main
program, the dlopen call succeeds and returns a handle for the main
map. This results in an unnecessary difference between glibc
testing (without --enable-hardcoded-path-in-tests) and production
usage.
This commit discards the names when building the link map in
_dl_new_object for the main executable, but it still determines
the origin at this point in case of an explict loader invocation.
The reason is that the specified pathname has to be used; the kernel
has a different notion of the main executable.
Joseph Myers [Thu, 15 Aug 2019 15:18:34 +0000 (15:18 +0000)]
Make totalorder and totalordermag functions take pointer arguments.
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Commit 7532837d7b03b3ca5b9a63d77a5bd81dd23f3d9c ("The
-Wstringop-truncation option new in GCC 8 detects common misuses")
added __attribute_nonstring__ to bits/utmp.h, but it did not update
the parallel bits/utmpx.h header. In struct utmp, the nonstring
attribute for ut_id was missing.
Florian Weimer [Thu, 15 Aug 2019 14:09:20 +0000 (16:09 +0200)]
login: Use struct flock64 in utmp [BZ #24880]
Commit 06ab719d30b01da401150068054d3b8ea93dd12f ("Fix Linux fcntl OFD
locks for non-LFS architectures (BZ#20251)") introduced the use of
fcntl64 into the utmp implementation. However, the lock file
structure was not updated to struct flock64 at that point.
Florian Weimer [Thu, 15 Aug 2019 14:09:05 +0000 (16:09 +0200)]
login: Disarm timer after utmp lock acquisition [BZ #24879]
If the file processing takes a long time for some reason, SIGALRM can
arrive while the file is still being processed. At that point, file
access will fail with EINTR. Disarming the timer after lock
acquisition avoids that. (If there was a previous alarm, it is the
responsibility of the caller to deal with the EINTR error.)
Florian Weimer [Thu, 15 Aug 2019 08:30:23 +0000 (10:30 +0200)]
login: Fix updwtmp, updwtmx unlocking
Commit 5a3afa9738f3dbbaf8c0a35665318c1af782111b (login: Replace
macro-based control flow with function calls in utmp) introduced
a regression because after it, __libc_updwtmp attempts to unlock
the wrong file descriptor.
Feng Xue [Wed, 14 Aug 2019 02:48:05 +0000 (10:48 +0800)]
aarch64: Disable using DC ZVA in emag memset
* sysdeps/aarch64/multiarch/memset_base64.S (DC_ZVA_THRESHOLD):
Disable DC ZVA code if this macro is defined as zero.
* sysdeps/aarch64/multiarch/memset_emag.S (DC_ZVA_THRESHOLD):
Change to zero to disable using DC ZVA.
Joseph Myers [Tue, 13 Aug 2019 23:04:38 +0000 (23:04 +0000)]
Declare some TS 18661-4 interfaces for C2X.
C2X (current version in git, postdating the most recent public draft
available as a PDF on the WG14 website) adds the interfaces from TS
18661-4, other than the reduction functions, as unconditionally
required and visible in <math.h> for hosted implementations; the
__STDC_WANT_IEC_60559_FUNCS_EXT__ macro is not included in C2X at all
(as the reduction functions aren't included at all, expected to end up
in a version of the TS updated to be relative to C2X).
This patch updates the glibc headers accordingly, following the same
pattern used for 18661-1 functions. As the only 18661-4 functions
currently supported are the exp10 functions that have been in glibc
for a very long time, this means that in fact __GLIBC_USE
(IEC_60559_FUNCS_EXT) ends up being used only to determine the
definition of __GLIBC_USE_IEC_60559_FUNCS_EXT_C2X, not yet in any
headers other than bits/libc-header-start.h.
(I hope to add the other 18661-4 functions to glibc at some point; the
main complication is the current lack of MPFR support for many of
these functions.)
Joseph Myers [Tue, 13 Aug 2019 11:28:51 +0000 (11:28 +0000)]
Declare most TS 18661-1 interfaces for C2X.
C2X adds the interfaces from TS 18661-1, and all except a handful in
Annex F are unconditionally visible in C2X rather than only visible
when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates
glibc headers accordingly: most uses of __GLIBC_USE
(IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE
(IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the
type-generic macros in tgmath.h will go away when the functions are
changed to take pointer arguments.)
Joseph Myers [Tue, 13 Aug 2019 11:26:00 +0000 (11:26 +0000)]
Add feature test macro _ISOC2X_SOURCE.
This patch starts preparation for C2X support in glibc headers by
adding a feature test macro _ISOC2X_SOURCE and corresponding
__GLIBC_USE (ISOC2X). (I chose to use the newer __GLIBC_USE style for
this rather than the older __USE_* macros tested with #ifdef.) As
with other such macros, C2X features are also enabled by compiling for
a standard newer than C17, or by using _GNU_SOURCE.
This patch does not itself enable anything new in the headers for C2X;
that is to be done in followup patches. (For example, most of the TS
18661-1 functions should be declared for C2X without any
__STDC_WANT_IEC_60559_BFP_EXT__ being needed, but the ones that
18661-1 adds to Annex F because of their close relation to IEEE 754
formats do still need the WANT macro in C2X.)
Once C2X becomes an actual standard we'll presumably move to using the
actual year in the feature test macro and __GLIBC_USE, with some
period when both macro spellings are accepted, as was done with
_ISOC9X_SOURCE.
Tested for x86_64.
* include/features.h (_ISOC2X_SOURCE): New feature test macro.
Undefine and define to 1 if [_GNU_SOURCE].
(__GLIBC_USE_ISOC2X): New macro. Undefine and redefine depending
on [_ISOC2X_SOURCE] and [__STDC_VERSION__ > 201710L].
(__USE_ISOC11): Also define to 1 if [_ISOC2X_SOURCE].
(__USE_ISOC99): Likewise.
(__USE_ISOC95): Likewise.
* manual/creature.texi (_ISOC2X_SOURCE): Document.
Florian Weimer [Mon, 12 Aug 2019 15:33:29 +0000 (17:33 +0200)]
elf: Support elf/tst-dlopen-aout in more configurations
dlopen can no longer open PIE binaries, so it is not necessary
to link the executable as non-PIE to trigger a dlopen failure.
If we hard-code the path to the real executable, we can run the test
with and without hard-coded paths because the dlopen path will not
be recognized as the main program in both cases. (With an explict
loader invocation, the loader currently adds argv[0] to l_libname
for the main map and the dlopen call suceeds as a result; it does
not do that in standard mode.)
malloc: Fix missing accounting of top chunk in malloc_info [BZ #24026]
Fixes `<total type="rest" size="..."> incorrectly showing as 0 most
of the time.
The rest value being wrong is significant because to compute the
actual amount of memory handed out via malloc, the user must subtract
it from <system type="current" size="...">. That result being wrong
makes investigating memory fragmentation issues like
<https://bugzilla.redhat.com/show_bug.cgi?id=843478> close to
impossible.
Joseph Myers [Wed, 7 Aug 2019 17:01:13 +0000 (17:01 +0000)]
Add SYNC_FILE_RANGE_WRITE_AND_WAIT from Linux 5.2 to bits/fcntl-linux.h.
This patch adds the SYNC_FILE_RANGE_WRITE_AND_WAIT constant from Linux
5.2 (a new name for a combination of existing bits, not actually a new
kernel interface) to bits/fcntl-linux.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]
(SYNC_FILE_RANGE_WRITE_AND_WAIT): New macro.
Joseph Myers [Tue, 6 Aug 2019 21:17:59 +0000 (21:17 +0000)]
Add AT_RECURSIVE from Linux 5.2 to fcntl.h.
This patch adds the AT_RECURSIVE constant from Linux 5.2 to glibc's
fcntl.h. (Existing practice in glibc is that the AT_* constants go
directly in io/fcntl.h rather than somewhere OS-specific.)
Tested for x86_64.
* io/fcntl.h [__USE_GNU] (AT_RECURSIVE): New macro.
Stefan Liebler [Tue, 6 Aug 2019 13:49:08 +0000 (15:49 +0200)]
s390: Fix Enable VDSO for static linking
The commit 5e855c8954014bca7b0d6f07312ec09553695ffd
"s390: Enable VDSO for static linking" removed the definition of VDSO_SETUP
which leads to not setup the vdso symbols.
Instead it jumps to false addresses.
This patch just re adds the removed VDSO_SETUP macro definition.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/init-first.c (VDSO_SETUP): New define.
linux: Enable vDSO for static linking as default (BZ#19767)
This patch assumes static vDSO is supported as default, it is now supported
on all current architectures that support vDSO. It allows removing both
ALWAYS_USE_VSYSCALL define, which an architecture requires to explicit define
and USE_VSYSCALL (which defines vDSO only for shared or if architecture defines
ALWAYS_USE_VSYSCALL).
Although s390 only enables vDSO for dynamically linked elf binaries
(arch/s390/kernel/vdso.c:217), there is no indication in the code or
associated commit message for why not enable it for statically linked
binaries as well. To double check, I rebuilt a kernel with the
check removed and the vDSO does work for static build for supplied
symbols.
There is just one file-based implementation, so this dispatch
mechanism is unnecessary. Instead of the vtable pointer
__libc_utmp_jump_table, use a non-negative file_fd as the indicator
that the backend is initialized.
Joseph Myers [Fri, 2 Aug 2019 11:36:07 +0000 (11:36 +0000)]
Update Linux kernel version number in tst-mman-consts.py to 5.2.
The tst-mman-consts.py test includes a kernel version number, to avoid
failures because of newly added constants in the kernel (if kernel
headers are newer than this version of glibc) or missing constants in
the kernel (if kernel headers are older than this version of glibc).
This patch updates it to 5.2 to reflect that the MAP_* constants in
glibc are still current as of that kernel version.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux
kernel version number to 5.2.
powerpc: Cleanup: use actual power8 assembly mnemonics
Some implementations in sysdeps/powerpc/powerpc64/power8/*.S still had
pre power8 compatible binutils hardcoded macros and were not using
.machine power8.
This patch should not have semantic changes, in fact it should have the
same exact code generated.
Tested that generated stripped shared objects are identical when
using "strip --remove-section=.note.gnu.build-id".
The changes introduce a memory leak for gconv steps arrays whose
first element is an internal conversion, which has a fixed
reference count which is not decremented. As a result, after the
change in commit 50ce3eae5ba304650459d4441d7d246a7cefc26f, the steps
array is never freed, resulting in an unbounded memory leak.
This reverts commit 50ce3eae5ba304650459d4441d7d246a7cefc26f
("gconv: Check reference count in __gconv_release_cache
[BZ #24677]") and commit 7e740ab2e7be7d83b75513aa406e0b10875f7f9c
("libio: Fix gconv-related memory leak [BZ #24583]"). It
reintroduces bug 24583. (Bug 24677 was just a regression caused by
the second commit.)
Joseph Myers [Tue, 30 Jul 2019 14:05:11 +0000 (14:05 +0000)]
Restore r31 setting in powerpc32 swapcontext.
Commit ffe8a9a8318e1db225b22da8bc067408494bac5c, "powerpc: Remove
rt_sigreturn usage on context function", removed from powerpc32
swapcontext a setting of r31 that is relied upon in subsequent code.
I'm not sure why this didn't produce test failures in Adhemerval's
32-bit testing; in my (soft-float) testing in preparation for 2.30
release, I see several context-related failures
nptl: Use uintptr_t for address diagnostic in nptl/tst-pthread-getattr
Recent GCC versions warn about the attempt to return the address of a
local variable:
tst-pthread-getattr.c: In function ‘allocate_and_test’:
tst-pthread-getattr.c:54:10: error: function returns address of local variable [-Werror=return-local-addr]
54 | return mem;
| ^~~
In file included from ../include/alloca.h:3,
from tst-pthread-getattr.c:26:
../stdlib/alloca.h:35:23: note: declared here
35 | # define alloca(size) __builtin_alloca (size)
| ^~~~~~~~~~~~~~~~~~~~~~~
tst-pthread-getattr.c:51:9: note: in expansion of macro ‘alloca’
51 | mem = alloca ((size_t) (mem - target));
| ^~~~~~
The address itself is used in a check in the caller, so using
uintptr_t instead is reasonable.
test-container: Install with $(sorted-subdirs) [BZ #24794]
Commit 35e038c1d2ccb3a75395662f9c4f28d85a61444f started to use an
incomplete list of subdirs based on $(all-subdirs) causing
testroot.pristine to miss files from nss.
Tested if the list of files in testroot.pristine remains the same.
[BZ #24794]
* Makeconfig (all-subdirs): Improved source comments.
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(sorted-subdirs)' to make install.
__gconv_release_cache is only ever called with heap-allocated
arrays which contain at least one member. The statically allocated
ASCII steps are filtered out by __wcsmbs_close_conv.
H.J. Lu [Wed, 24 Jul 2019 21:48:33 +0000 (14:48 -0700)]
x86-64: Compile branred.c with -mprefer-vector-width=128 [BZ #24603]
When compiled with -O3 and AVX, GCC 8 and 9 optimize some loops in
sysdeps/ieee754/dbl-64/branred.c with 256-bit vector instructions,
which leads to store forward stall:
There is no easy fix in compiler. This patch limits vector width to
128 bits to work around this issue. It improves performance of sin
and cos by more than 40% on Skylake compiled with -O3 -march=skylake.
Tested with GCC 7/8/9 on x86-64.
[BZ #24603]
* sysdeps/x86_64/configure.ac: Check if -mprefer-vector-width=128
works.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/fpu/Makefile (CFLAGS-branred.c): New. Set
to -mprefer-vector-width=128 if supported.
Linux: Use in-tree copy of SO_ constants for !__USE_MISC [BZ #24532]
The kernel changes for a 64-bit time_t on 32-bit architectures
resulted in <asm/socket.h> indirectly including <linux/posix_types.h>.
The latter is not namespace-clean for the POSIX version of
<sys/socket.h>.
This issue has persisted across several Linux releases, so this commit
creates our own copy of the SO_* definitions for !__USE_MISC mode.
The new test socket/tst-socket-consts ensures that the copy is
consistent with the kernel definitions (which vary across
architectures). The test is tricky to get right because CPPFLAGS
includes include/libc-symbols.h, which in turn defines _GNU_SOURCE
unconditionally.
Tested with build-many-glibcs.py. I verified that a discrepancy in
the definitions actually results in a failure of the
socket/tst-socket-consts test.
test-container: Install with $(all-subdirs) [BZ #24794]
Whenever a sub-make is created, it inherits the variable subdirs from its
parent. This is also true when make check is called with a restricted
list of subdirs. In this scenario, make install is executed "partially"
and testroot.pristine ends up with an incomplete installation.
[BZ #24794]
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(all-subdirs)' to make install.
test-container: Avoid copying unintended system libraries
Some DSOs are distributed in hardware capability directories, e.g.
/usr/lib64/power7/libc.so.6
Whenever the processor is able to use one of these hardware-enabled
DSOs, testroot.pristine ends up with copies of glibc-provided libraries
from the system because it can't overwrite or remove them.
This patch avoids the unintended copies by executing ld.so with the same
arguments passed to each glibc test.
* Makefile (testroot.pristine/install.stamp): Execute ld.so with
the same arguments used in all tests.
nptl: Add POSIX-proposed _clock functions to hppa pthread.h
The pthread _clock functions that were recently added to nptl need to be
declared in hppa's pthread.h too. After this change, the function
declaration part of sysdeps/nptl/pthread.h and
sysdeps/unix/sysv/linux/hppa/pthread.h are identical.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Add declarations of
functions recently added to sysdeps/nptl/pthread.h:
pthread_mutex_clocklock, pthread_rwlock_clockrdlock,
pthread_rwlock_clockwrlock and pthread_cond_clockwait.
Mike Crowe [Wed, 17 Jul 2019 17:51:08 +0000 (14:51 -0300)]
nptl: Remove unnecessary forwarding of pthread_cond_clockwait from libc
In afe4de7d283ebd88157126c5494ce1796194c16e, I added forwarding functions
from libc to libpthread for __pthread_cond_clockwait and
pthread_cond_clockwait to mirror those for pthread_cond_timedwait. These
are unnecessary[1], since these functions aren't (yet) being called from
within libc itself. Let's remove them.
* nptl/forward.c: Remove unnecessary __pthread_cond_clockwait and
pthread_cond_clockwait forwarding functions. There are no internal
users, so it is unnecessary to expose these functions in libc.so.
* sysdeps/nptl/pthread-functions.h (pthread_functions): Remove
unnecessary ptr___pthread_cond_clockwait member.
* nptl/nptl-init.c (pthread_functions): Remove assignment of
removed member.
Afar locales: Months and days updated from CLDR (bug 21897).
This commit updates month and weekday names (full and abbreviated)
from CLDR 35.1 with the following exceptions.
It was not clear why the full name of February in aa_DJ and aa_ER was
"Kudo" while the abbreviated version is "Nah" but some additional
sources [1] [2] as well as the content of aa_ER and aa_ER@saaho
suggest it should be "Naharsi Kudo". This commit consequently sets
the translation of February to "Naharsi Kudo" in aa_DJ and aa_ET.
aa_ER@saaho is not supported by CLDR but since the month names were
identical to aa_ER before this commit, the same values have been copied
from aa_ER.
[BZ #21897]
* localedata/locales/aa_DJ (abday): Update from CLDR, all words
begin with an uppercase letter now.
(abmon): Likewise.
(mon): Update from CLDR, reword February from "Kudo" to
"Naharsi Kudo", April from "Agda Baxisso" to "Agda Baxis",
and August from "Liiqen" to "Leqeeni".
* localedata/locales/aa_ER (mon): Update from CLDR, reword
April from "Agda Baxisso" to "Agda Baxis" and August from
"Leqeeni" to "Liiqen".
* localedata/locales/aa_ER@saaho (mon): Likewise.
* localedata/locales/aa_ET (abmon): Update from CLDR, reword
abbreviated February from "Kud" to "Nah".
(mon): Update from CLDR, reword February from "Kudo" to
"Naharsi Kudo" and April from "Agda Baxisso" to "Agda Baxis".
The only implementation of futex_supports_exact_relative_timeouts always
returns true. Let's remove it and all its callers.
* nptl/pthread_cond_wait.c: (__pthread_cond_clockwait): Remove code
that is only useful if futex_supports_exact_relative_timeouts ()
returns false.
* nptl/pthread_condattr_setclock.c: (pthread_condattr_setclock):
Likewise.
* sysdeps/nptl/futex-internal.h: Remove comment about relative
timeouts potentially being imprecise since it's no longer true.
Remove declaration of futex_supports_exact_relative_timeouts.
* sysdeps/unix/sysv/linux/futex-internal.h: Remove implementation
of futex_supports_exact_relative_timeouts.
Mike Crowe [Mon, 24 Jun 2019 19:48:14 +0000 (19:48 +0000)]
nptl: Add POSIX-proposed pthread_mutex_clocklock
Add POSIX-proposed pthread_mutex_clocklock function that works like
pthread_mutex_timedlock but takes a clockid parameter to measure the
abstime parameter against.
* sysdeps/nptl/pthread.h: Add pthread_mutex_clocklock.
* nptl/DESIGN-systemtap-probes.txt: Likewise.
* nptl/pthread_mutex_timedlock.c
(__pthread_mutex_clocklock_common): Rename from
__pthread_mutex_timedlock and add clockid parameter. Pass this
parameter to lll_clocklock and lll_clocklock_elision in place of
CLOCK_REALTIME. (__pthread_mutex_clocklock): New function to add
LIBC_PROBE and validate clockid parameter before calling
__pthread_mutex_clocklock_common. (__pthread_mutex_timedlock): New
implementation to add LIBC_PROBE and calls
__pthread_mutex_clocklock_common passing CLOCK_REALTIME as the
clockid.
* nptl/Makefile: Add tst-mutex11.c.
* nptl/tst-abstime.c (th): Add tests for pthread_mutex_clocklock.
* nptl/tst-mutex11.c: New tests for passing invalid and unsupported
clockid parameters to pthread_mutex_clocklock.
* nptl/tst-mutex5.c (do_test_clock): Rename from do_test and take
clockid parameter to indicate which clock to be used. Call
pthread_mutex_timedlock or pthread_mutex_clocklock as appropriate.
(do_test): Call do_test_clock to separately test
pthread_mutex_timedlock, pthread_mutex_clocklock(CLOCK_REALTIME)
and pthread_mutex_clocklock(CLOCK_MONOTONIC).
* nptl/tst-mutex9.c: Likewise.
* nptl/Versions (GLIBC_2.30): Add pthread_mutex_clocklock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
Mike Crowe [Mon, 24 Jun 2019 13:08:25 +0000 (13:08 +0000)]
nptl: Rename lll_timedlock to lll_clocklock and add clockid parameter
Rename lll_timedlock to lll_clocklock and add clockid
parameter to indicate the clock that the abstime parameter should
be measured against in preparation for adding
pthread_mutex_clocklock.
The name change mirrors the naming for the exposed pthread functions:
timed => absolute timeout measured against CLOCK_REALTIME (or clock
specified by attribute in the case of pthread_cond_timedwait.)
clock => absolute timeout measured against clock specified in preceding
parameter.
* sysdeps/nptl/lowlevellock.h (lll_clocklock): Rename from
lll_timedlock and add clockid parameter. (__lll_clocklock): Rename
from __lll_timedlock and add clockid parameter.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_clocklock):
Likewise.
* nptl/lll_timedlock_wait.c (__lll_clocklock_wait): Rename from
__lll_timedlock_wait and add clockid parameter. Use __clock_gettime
rather than __gettimeofday so that clockid can be used. This means
that conversion from struct timeval is no longer required.
* sysdeps/sparc/sparc32/lowlevellock.c (lll_clocklock_wait):
Likewise.
* sysdeps/sparc/sparc32/lll_timedlock_wait.c: Update comment to
refer to __lll_clocklock_wait rather than __lll_timedlock_wait.
* nptl/pthread_mutex_timedlock.c (lll_clocklock_elision): Rename
from lll_timedlock_elision, add clockid parameter and use
meaningful names for other parameters. (__pthread_mutex_timedlock):
Pass CLOCK_REALTIME where necessary to lll_clocklock and
lll_clocklock_elision.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_clocklock_elision): Rename from lll_timedlock_elision and add
clockid parameter. (__lll_clocklock_elision): Rename from
__lll_timedlock_elision and add clockid parameter.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-timed.c
(__lll_lock_elision): Call __lll_clocklock_elision rather than
__lll_timedlock_elision. (EXTRAARG): Add clockid parameter.
(LLL_LOCK): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-timed.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-timed.c: Likewise.
which behave like pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock respectively, except they always measure
abstime against the supplied clockid. The functions currently support
CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other
clock is specified.
* sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and
pthread_wrlock_clockwrlock.
* nptl/Makefile: Build pthread_rwlock_clockrdlock.c and
pthread_rwlock_clockwrlock.c.
* nptl/pthread_rwlock_clockrdlock.c: Implement
pthread_rwlock_clockrdlock.
* nptl/pthread_rwlock_clockwrlock.c: Implement
pthread_rwlock_clockwrlock.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add
clockid parameter and verify that it indicates a supported clock on
entry so that we fail even if it doesn't end up being used. Pass
that clock on to futex_abstimed_wait when necessary.
(__pthread_rwlock_wrlock_full): Likewise.
* nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass
CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't
be used because there's no timeout.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass
CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't
be used because there is no timeout.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime
uses that clock.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime
uses that clock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock timeout tests to match the existing
pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests.
* nptl/tst-rwlock14.c (do_test): Likewise.
* nptl/tst-rwlock6.c Invent verbose_printf macro, and use for
ancillary output throughout. (tf): Accept thread_args structure so
that rwlock, a clockid and function name can be passed to the
thread. (do_test_clock): Rename from do_test. Accept clockid
parameter to specify test clock. Use the magic clockid value of
CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock should be tested, otherwise pass the
specified clockid to pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* nptl/tst-rwlock7.c: Likewise.
* nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept
thread_args structure so that the (now int) thread number, the
clockid and the function name can be passed to the thread.
(do_test_clock): Renamed from do_test. Pass the necessary
thread_args when creating the reader and writer threads. Use
xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* manual/threads.texi: Add documentation for
pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock.
Mike Crowe [Mon, 24 Jun 2019 12:39:02 +0000 (12:39 +0000)]
nptl: pthread_rwlock: Move timeout validation into _full functions
As recommended by the comments in the implementations of
pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock, let's move
the timeout validity checks into the corresponding pthread_rwlock_rdlock_full
and pthread_rwlock_wrlock_full functions. Since these functions may be
called with abstime == NULL, an extra check for that is necessary too.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full):
Check validity of abstime parameter.
(__pthread_rwlock_rwlock_full): Likewise.
* nptl/pthread_rwlock_timedrdlock.c
* (pthread_rwlock_timedrdlock):
Remove check for validity of abstime parameter.
* nptl/pthread_rwlock_timedwrlock.c
* (pthread_rwlock_timedwrlock):
Likewise.
which behaves just like pthread_cond_timedwait except it always measures
abstime against the supplied clockid. Currently supports CLOCK_REALTIME
and
CLOCK_MONOTONIC and returns EINVAL if any other clock is specified.
Includes feedback from many others. This function was originally
proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group
preferred the new name.
* nptl/Makefile: Add tst-cond26 and tst-cond27
* nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait
* sysdeps/nptl/pthread.h: Likewise
* nptl/forward.c: Add __pthread_cond_clockwait
* nptl/forward.c: Likewise
* nptl/pthreadP.h: Likewise
* sysdeps/nptl/pthread-functions.h: Likewise
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add
clockid parameter and comment describing why we don't need to
check
its value. Use that value when calling
futex_abstimed_wait_cancelable rather than reading the clock
from
the flags. (__pthread_cond_wait): Pass unused clockid parameter.
(__pthread_cond_timedwait): Read clock from flags and pass it to
__pthread_cond_wait_common. (__pthread_cond_clockwait): Add new
function with weak alias from pthread_cond_clockwait.
* sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist
* (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-cond11.c (run_test): Support testing
pthread_cond_clockwait too by using a special magic
CLOCK_USE_ATTR_CLOCK value to determine whether to call
pthread_cond_timedwait or pthread_cond_clockwait. (do_test):
Pass
CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using
all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME.
* ntpl/tst-cond26.c: New test for passing unsupported and
* invalid
clocks to pthread_cond_clockwait.
* nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using
struct timespec and pthread_cond_clockwait.
* manual/threads.texi: Document pthread_cond_clockwait. The
* comment
was provided by Carlos O'Donell.
Mike Crowe [Fri, 21 Jun 2019 15:57:41 +0000 (15:57 +0000)]
nptl: Add POSIX-proposed sem_clockwait
Add:
int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec
*abstime)
which behaves just like sem_timedwait, but measures abstime against the
specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC
and sets errno == EINVAL if any other clock is specified.
* nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add
clockid parameters to indicate the clock which abstime should be
measured against.
* nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c
(__new_sem_wait): Pass CLOCK_REALTIME as clockid to
__new_sem_wait_slow.
* nptl/sem_clockwait.c: New file to implement sem_clockwait based
on sem_timedwait.c.
* nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for
sem_clockwait.c to match those used for sem_timedwait.c.
* sysdeps/pthread/semaphore.h: Add sem_clockwait.
* nptl/Versions (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-sem17.c: Add new test for passing invalid clock to
sem_clockwait.
* nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait
tests to also test sem_clockwait.
* manual/threads.texi: Document sem_clockwait.
Mike Crowe [Fri, 21 Jun 2019 14:53:40 +0000 (14:53 +0000)]
nptl: Add clockid parameter to futex timed wait calls
In preparation for adding POSIX clockwait variants of timedwait functions,
add a clockid_t parameter to futex_abstimed_wait functions and pass
CLOCK_REALTIME from all callers for the time being.
Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset
which takes a clockid_t parameter rather than the magic clockbit.
* sysdeps/nptl/lowlevellock-futex.h,
sysdeps/unix/sysv/linux/lowlevellock-futex.h: Replace
lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset that
takes a clockid rather than a special clockbit.
* sysdeps/nptl/lowlevellock-futex.h: Add
lll_futex_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling lll_futex_clock_wait_bitset.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h
(futex_abstimed_wait, futex_abstimed_wait_cancelable): Add
clockid_t parameter to indicate which clock the absolute time
passed should be measured against. Pass that clockid onto
lll_futex_clock_wait_bitset. Add invalid clock as reason for
returning -EINVAL.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h: Introduce
futex_abstimed_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling futex_abstimed_wait.
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Remove
code to calculate relative timeout for
__PTHREAD_COND_CLOCK_MONOTONIC_MASK and just pass CLOCK_MONOTONIC
or CLOCK_REALTIME as required to futex_abstimed_wait_cancelable.
* nptl/pthread_rwlock_common (__pthread_rwlock_rdlock_full)
(__pthread_wrlock_full), nptl/sem_waitcommon (do_futex_wait): Pass
additional CLOCK_REALTIME to futex_abstimed_wait_cancelable.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock):
Switch to lll_futex_clock_wait_bitset and pass CLOCK_REALTIME
posix: Fix large mmap64 offset for mips64n32 (BZ#24699)
The fix for BZ#21270 (commit 158d5fa0e19) added a mask to avoid offset larger
than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap,
as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such
x32, defines off_t being equal to off64_t). This leads to use the same
mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum
offset it can use with mmap64.
This patch fixes by setting the high mask only for __NR_mmap2 usage. The
posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The
patch also change the test to check for an arch-specific header that defines
the maximum supported offset.
Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset
on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and
mips64-n32-linux-gnu.
[BZ #24699]
* posix/tst-mmap-offset.c: Mention BZ #24699.
(do_test_bz21270): Rename to do_test_large_offset and use
mmap64_maximum_offset to check for maximum expected offset value.
* sysdeps/generic/mmap_info.h: New file.
* sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise.
* sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff
__NR_mmap2 is used.
nss_db allows for getpwent et al to be called without a set*ent,
but it only works once. After the last get*ent a set*ent is
required to restart, because the end*ent did not properly reset
the module. Resetting it to NULL allows for a proper restart.
If the database doesn't exist, however, end*ent erroniously called
munmap which set errno.
The test case runs "makedb" inside the testroot, so needs selinux
DSOs installed.
Mao Han [Wed, 10 Jul 2019 06:09:51 +0000 (14:09 +0800)]
locale/tst-locale-locpath: Fix arguments passing
The arguments passed by Makefile are missing match with the arguments
taken by locale/tst-locale-locpath.sh. Without this patch
cross-test-ssh.sh will be called twice in a single command while
doing the make check test wish ssh test wrapper.
Paul A. Clarke [Mon, 8 Jul 2019 22:06:19 +0000 (17:06 -0500)]
[powerpc] fenv_libc.h: protect use of __builtin_cpu_supports
Using __builtin_cpu_supports() requires support in GCC and Glibc.
My recent patch to fenv_libc.h added an unprotected use of
__builtin_cpu_supports(). Compilation of Glibc itself will fail
with a sufficiently new GCC and sufficiently old Glibc:
../sysdeps/powerpc/fpu/fegetexcept.c: In function ‘__fegetexcept’:
../sysdeps/powerpc/fpu/fenv_libc.h:52:20: error: builtin ‘__builtin_cpu_supports’ needs GLIBC (2.23 and newer) that exports hardware capability bits [-Werror]
The power7 logb implementation does not show a performance gain on
ISA 2.07+ chips with faster floating-point to GRP instructions
(currently POWER8 and POWER9).
This patch moves the POWER7 implementation to generic one and enables
it for POWER7. It also add some cleanup to use inline floating-point
number instead of define them using static const.
The ifunc implementation is also enabled only for powerpc64.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power7/fpu/s_logb.c: Move to ...
* sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ...
* sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ...
* sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_log* objects.
(CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c,
CFLAGS-s_logb-power7.c): New fule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
- The resulting binary difference on 32 bits architecture is
minimum. On i686-linux-gnu (with architecture optimization
routine removed) there is no different using logb benchtests
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Move to ...
* sysdeps/ieee754/dbl-64/s_logb.c: ... here. Add work around for
powerpc32 integer 0 converting to -0.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>