mips: Do not include hi and lo in __SYSCALL_CLOBBERS for R6
GCC 10 (PR 91233) won't silently allow registers that are not architecturally
available to be present in the clobber list anymore, resulting in build failure
for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
146 | __asm__ volatile ( \
| ^~~~~~~
This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension.
This patch provides the alternative definitions of __SYSCALL_CLOBBERS for r6
targets that won't include those registers.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (__SYSCALL_CLOBBERS): Exclude
hi and lo from the clobber list for __mips_isa_rev >= 6.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (__SYSCALL_CLOBBERS): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (__SYSCALL_CLOBBERS): Likewise.
ldbl-128ibm-compat: Add ISO C99 versions of scanf functions
In the format string for *scanf functions, the '%as', '%aS', and '%a[]'
modifiers behave differently depending on ISO C99 compatibility. When
_GNU_SOURCE is defined and -std=c89 is passed to the compiler, these
functions behave like ascanf, and the modifiers allocate memory for the
output. Otherwise, the ISO C99 compliant version of these functions is
used, and the modifiers consume a floating-point argument. This patch
adds the IEEE binary128 variant of ISO C99 compliant functions for the
third long double format on powerpc64le.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use C99-compliant scanf under _GNU_SOURCE with modern compilers.
the selection of the GNU versions of scanf functions requires both
_GNU_SOURCE and -std=c89. This patch changes the tests in
ldbl-128ibm-compat so that they actually test the GNU versions (without
this change, the redirection to the ISO C99 version always happens, so
GNU versions of the new implementation (e.g. __scanfieee128) were left
untested).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Florian Weimer [Fri, 13 Dec 2019 09:23:10 +0000 (10:23 +0100)]
dlopen: Do not block signals
Blocking signals causes issues with certain anti-malware solutions
which rely on an unblocked SIGSYS signal for system calls they
intercept.
This reverts commit a2e8aa0d9ea648068d8be52dd7b15f1b6a008e23
("Block signals during the initial part of dlopen") and adds
comments related to async signal safety to active_nodelete and
its caller.
Note that this does not make lazy binding async-signal-safe with regards
to dlopen. It merely avoids introducing new async-signal-safety hazards
as part of the NODELETE changes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Fri, 13 Dec 2019 09:18:46 +0000 (10:18 +0100)]
dlopen: Rework handling of pending NODELETE status
Commit a2e8aa0d9ea648068d8be52dd7b15f1b6a008e23 ("Block signals during
the initial part of dlopen") was deemed necessary because of
read-modify-write operations like the one in add_dependency in
elf/dl-lookup.c. In the old code, we check for any kind of NODELETE
status and bail out:
/* Redo the NODELETE check, as when dl_load_lock wasn't held
yet this could have changed. */
if (map->l_nodelete != link_map_nodelete_inactive)
goto out;
If a signal arrives during relocation and the signal handler, through
lazy binding, adds a global scope dependency on the same map, it will
set map->l_nodelete to link_map_nodelete_active. This will be
overwritten with link_map_nodelete_pending by the dlopen relocation
code.
To avoid such problems in relation to the l_nodelete member, this
commit introduces two flags for active NODELETE status (irrevocable)
and pending NODELETE status (revocable until activate_nodelete is
invoked). As a result, NODELETE processing in dlopen does not
introduce further reasons why lazy binding from signal handlers
is unsafe during dlopen, and a subsequent commit can remove signal
blocking from dlopen.
This does not address pre-existing issues (unrelated to the NODELETE
changes) which make lazy binding in a signal handler during dlopen
unsafe, such as the use of malloc in both cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It can happen that an already-loaded object that is in the local
scope is promoted to NODELETE status, via binding to a unique
symbol.
Similarly, it is possible that such NODELETE promotion occurs to
an already-loaded object from the global scope. This is why the
loop in activate_nodelete has to cover all objects in the namespace
of the new object.
In do_lookup_unique, it could happen that the NODELETE status of
an already-loaded object was overwritten with a pending NODELETE
status. As a result, if dlopen fails, this could cause a loss of
the NODELETE status of the affected object, eventually resulting
in an incorrect unload.
Stefan Liebler [Wed, 11 Dec 2019 14:09:33 +0000 (15:09 +0100)]
S390: Implement roundtoint and converttoint and define TOINT_INTRINSICS.
This patch implements roundtoint and convertoint for s390
by using the load-fp-integer and convert-to-fixed instructions.
Both functions are using "round to nearest with ties away from zero"
rounding mode and do not raise inexact exceptions.
Stefan Liebler [Wed, 11 Dec 2019 14:09:32 +0000 (15:09 +0100)]
S390: Use libc_fe* macros in fe* functions.
This patch updates the s390 specific functions fegetround,
fesetround, feholdexcept, fesetenv, feupdateenv, fegetexceptflag,
fetestexcept, fesetexceptflag, fetestexceptflag.
Now those functions are using the libc_fe* macros if possible.
Furthermore fegetexceptflag is now returning the exception from
dxc field shifted to the usual exception-flags.
Thus a special fetestexceptflag implementation is not needed anymore.
Stefan Liebler [Wed, 11 Dec 2019 14:09:31 +0000 (15:09 +0100)]
S390: Implement libc_fe* macros.
This patch provides the s390 specific implementation for
libc_feholdexcept, libc_fesetround, libc_feholdexcept_setround,
libc_fetestexcept, libc_fesetenv, libc_feupdateenv_test,
libc_feupdateenv, libc_feholdsetround_ctx, libc_feresetround_ctx,
libc_feholdsetround_noex_ctx and libc_feresetround_noex_ctx.
Stefan Liebler [Wed, 11 Dec 2019 14:09:31 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for llround functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement llround, llroundf, llroundl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:30 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for lround functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement lround, lroundf, lroundl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:29 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for llrint functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement llrint, llrintf, llrintl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:29 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for lrint functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement lrint, lrintf, lrintl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:28 +0000 (15:09 +0100)]
S390: Use load-fp-integer instruction for roundeven functions.
If compiled with z196 zarch support, the load-fp-integer instruction
is used to implement roundeven, roundevenf, roundevenl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:24 +0000 (15:09 +0100)]
Use GCC builtins for copysign functions if desired.
This patch is always using the corresponding GCC builtin for copysignf, copysign,
and is using the builtin for copysignl, copysignf128 if the USE_FUNCTION_BUILTIN
macros are defined to one in math-use-builtins.h.
Altough the long double version is enabled by default we still need
the macro and the alternative implementation as the _Float128 version
of the builtin is not available with all supported GCC versions.
Stefan Liebler [Wed, 11 Dec 2019 14:09:24 +0000 (15:09 +0100)]
Use GCC builtins for round functions if desired.
This patch is using the corresponding GCC builtin for roundf, round,
roundl and roundf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:22 +0000 (15:09 +0100)]
Use GCC builtins for trunc functions if desired.
This patch is using the corresponding GCC builtin for truncf, trunc,
truncl and truncf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:21 +0000 (15:09 +0100)]
Use GCC builtins for ceil functions if desired.
This patch is using the corresponding GCC builtin for ceilf, ceil,
ceill and ceilf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:20 +0000 (15:09 +0100)]
Use GCC builtins for floor functions if desired.
This patch is using the corresponding GCC builtin for floorf, floor,
floorl and floorf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:20 +0000 (15:09 +0100)]
Use GCC builtins for rint functions if desired.
This patch is using the corresponding GCC builtin for rintf, rint,
rintl and rintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:18 +0000 (15:09 +0100)]
Use GCC builtins for nearbyint functions if desired.
This patch is using the corresponding GCC builtin for nearbyintf, nearbyint,
nearbintl and nearbyintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:17 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_trunc.c.
This patch replaces s_trunc.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Also adjusted the include path in x86_64 and sparc64 files.
Stefan Liebler [Wed, 11 Dec 2019 14:09:16 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_ceil.c.
This patch replaces s_ceil.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Also adjusted the include path in x86_64 and sparc64 files.
Stefan Liebler [Wed, 11 Dec 2019 14:09:15 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_floor.c.
This patch replaces s_floor.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Also adjusted the include path in x86_64 and sparc64 files.
Stefan Liebler [Wed, 11 Dec 2019 14:09:14 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_rint.c.
This patch replaces s_rint.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Stefan Liebler [Wed, 11 Dec 2019 14:09:14 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_nearbyint.c.
This patch replaces s_nearbyint.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Samuel Thibault [Tue, 10 Dec 2019 23:23:00 +0000 (00:23 +0100)]
hurd: Fix using altstack while in an RPC call to be aborted
* sysdeps/mach/hurd/i386/trampoline.c (_hurd_setup_sighandler): Always check
for interrupted code being with esp pointing at mach_msg arguments, even
when using an altstack. If we need to abort the RPC we will need
this.
Carlos O'Donell [Tue, 3 Dec 2019 20:42:24 +0000 (15:42 -0500)]
Fix failure when CFLAGS contains -DNDEBUG (Bug 25251)
Building tests with -DNDEBUG in CFLAGS, gcc 9.2.1 issues the following error:
tst-assert-c++.cc: In function ‘int do_test()’:
tst-assert-c++.cc:66:12: error: unused variable ‘value’ [-Werror=unused-variable]
66 | no_int value;
| ^~~~~
tst-assert-c++.cc:71:18: error: unused variable ‘value’ [-Werror=unused-variable]
71 | bool_and_int value;
| ^~~~~
The assert has been disabled by building glibc with CFLAGS, CXXFLAGS,
and CPPFLAGS with -DNDEBUG which removes the assert and leaves the
value unused.
We never want the assert disabled because that's the point of the
test, so we undefine NDEBUG before including assert.h to ensure that
we get assert correctly defined.
nptl: Add more missing placeholder abi symbol from nanosleep move
This patch adds the missing __libpthread_version_placeholder for
GLIBC_2.2.6 version from the nanosleep implementation move from
libpthread to libc (79a547b162).
It also fixes the wrong compat symbol definitions added by changing
back the version used on vfork check and remove the
__libpthread_version_placeholder added on some ABI (4f4bb489e0dd).
The __libpthread_version_placeholder is also refactored to make it
simpler to add new compat_symbols by adding a new macro
compat_symbol_unique which uses the compiler extension __COUNTER__
to generate unique strong alias to be used with compat_symbol.
Checked with a updated-abi on the all affected abis of the nanosleep
move.
Lukasz Majewski [Fri, 8 Nov 2019 12:15:27 +0000 (13:15 +0100)]
y2038: linux: Provide __timer_settime64 implementation
This patch provides new __timer_settime64 explicit 64 bit function for setting
flags, interval and value of specified timer.
Moreover, a 32 bit version - __timer_settime has been refactored to internally
use __timer_settime64.
The __timer_settime is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct
__timespec64 from struct timespec (and opposite when old_value pointer is
provided).
The new __timer_settime64 syscall available from Linux 5.1+ has been used, when
applicable.
The original INLINE_SYSCALL() macro has been replaced with
INLINE_SYSCALL_CALL() to avoid explicit passing the number of arguments.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make check PARALLELMFLAGS="-j8" && \\
make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with timer_settime64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports timer_settime64
syscall.
- Linux v4.19 (no timer_settime64 support) with default minimal kernel version
for contemporary glibc (3.2.0)
This kernel doesn't support timer_settime64 syscall, so the fallback to
timer_settime is tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
Lukasz Majewski [Tue, 5 Nov 2019 16:04:24 +0000 (17:04 +0100)]
y2038: linux: Provide __timer_gettime64 implementation
This patch provides new __timer_gettime64 explicit 64 bit function for reading
status of specified timer. To be more precise - the remaining time and interval
set with timer_settime.
Moreover, a 32 bit version - __timer_gettime has been refactored to internally
use __timer_gettime64.
The __timer_gettime is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversion from 64 bit struct
__timespec64 to struct timespec.
The new __timer_gettime64 syscall available from Linux 5.1+ has been used, when
applicable.
The original INLINE_SYSCALL() macro has been replaced with
INLINE_SYSCALL_CALL() to avoid explicit passing the number of arguments.
Build tests:
- The code has been tested on x86_64/x86 (native compilation):
make PARALLELMFLAGS="-j8" && make check PARALLELMFLAGS="-j8" && \\
make xcheck PARALLELMFLAGS="-j8"
- The glibc has been build tested (make PARALLELMFLAGS="-j8") for
x86 (i386), x86_64-x32, and armv7
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
- Use of cross-test-ssh.sh for ARM (armv7):
make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck
Linux kernel, headers and minimal kernel version for glibc build test
matrix:
- Linux v5.1 (with timer_gettime64) and glibc build with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports timer_gettime64
syscall.
- Linux v4.19 (no timer_gettime64 support) with default minimal kernel version
for contemporary glibc (3.2.0)
This kernel doesn't support timer_gettime64 syscall, so the fallback to
timer_gettime is tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
Lukasz Majewski [Fri, 8 Nov 2019 10:13:56 +0000 (11:13 +0100)]
timer: Decouple x86_64 specific timer_settime from generic Linux implementation
The x86_64 specific timer_settime implementation (from
./linux/x86_64/timer_settime.c) reused the Linux generic one (from
./linux/timer_settime.c) to implement handling some compatible timers
(previously defined in librt, now in libc).
As the generic implementation now is going to also support new (available
from Linux 5.1+) timer_settime64 syscall, those two implementations have
been decoupled for easier conversion.
The original INLINE_SYSCALL() macro has been replaced with
INLINE_SYSCALL_CALL() to avoid explicit passing the number of arguments.
Lukasz Majewski [Tue, 5 Nov 2019 11:18:24 +0000 (12:18 +0100)]
timer: Decouple x86_64 specific timer_gettime from generic Linux implementation
The x86_64 specific timer_gettime implementation (from
./linux/x86_64/timer_gettime.c) reused the Linux generic one (from
./linux/timer_gettime.c) to implement handling some compatible timers
(previously defined in librt, now in libc).
As the generic implementation now is going to also support new (available
from Linux 5.1+) timer_gettime64 syscall, those two implementations have
been decoupled for easier conversion.
The original INLINE_SYSCALL() macro has been replaced with
INLINE_SYSCALL_CALL() to avoid explicit passing the number of arguments.
DJ Delorie [Tue, 3 Dec 2019 22:44:36 +0000 (17:44 -0500)]
Correct range checking in mallopt/mxfast/tcache [BZ #25194]
do_set_tcache_max, do_set_mxfast:
Fix two instances of comparing "size_t < 0"
Both cases have upper limit, so the "negative value" case
is already handled via overflow semantics.
do_set_tcache_max, do_set_tcache_count:
Fix return value on error. Note: currently not used.
mallopt:
pass return value of helper functions to user. Behavior should
only be actually changed for mxfast, where we restore the old
(pre-tunables) behavior.
Florian Weimer [Thu, 5 Dec 2019 16:29:42 +0000 (17:29 +0100)]
misc/test-errno-linux: Handle EINVAL from quotactl
In commit 3dd4d40b420846dd35869ccc8f8627feef2cff32 ("xfs: Sanity check
flags of Q_XQUOTARM call"), Linux 5.4 added checking for the flags
argument, causing the test to fail due to too restrictive test
expectations.
Kamlesh Kumar [Thu, 5 Dec 2019 15:49:00 +0000 (16:49 +0100)]
<string.h>: Define __CORRECT_ISO_CPP_STRING_H_PROTO for Clang [BZ #25232]
Without the asm redirects, strchr et al. are not const-correct.
libc++ has a wrapper header that works with and without
__CORRECT_ISO_CPP_STRING_H_PROTO (using a Clang extension). But when
Clang is used with libstdc++ or just C headers, the overloaded functions
with the correct types are not declared.
This change does not impact current GCC (with libstdc++ or libc++).
Alistair Francis [Mon, 15 Jul 2019 23:30:59 +0000 (16:30 -0700)]
sysdeps/clock_gettime: Use clock_gettime64 if avaliable
With the clock_gettime64 call we prefer to use vDSO. There is no call
to clock_gettime64 on glibc with older headers and kernel 5.1+ if it
doesn't support vDSO.
Alistair Francis [Wed, 18 Sep 2019 15:37:58 +0000 (08:37 -0700)]
sysdeps: Add clock_gettime64 vDSO
Add support for the clock_gettim64 vDSO calls. These are protected by
the HAVE_CLOCK_GETTIME64_VSYSCALL define.
HAVE_CLOCK_GETTIME64_VSYSCALL should be defined for 32-bit platforms
(WORDSIZE == 32) that only run on the 5.1 kernel or later. WORDSIZE ==
64 platforms can use #define __vdso_clock_gettime64 __vdso_clock_gettime
and use the __vdso_clock_gettime syscall as they don't have a
__vdso_clock_gettime64 call.
Do not use ld.so to open statically linked programs in debugglibc.sh
Debugging programs that have been dynamically linked against an
uninstalled glibc requires unusual steps, such as letting gdb know where
the thread db library is located and explicitly calling the loader.
However, when the program under test is statically linked, these steps
are not required (as a matter of fact, using the dynamic loader to run a
statically linked program is wrong and will fail), and gdb should be
called the usual way.
This patch modifies debugglibc.sh so that it checks if the program under
test is statically linked, then runs the debugger appropriately.
Some test cases are meant to be ran inside the container infrastructure
and make check automatically runs them as such. However, running a
single test case in a container without make check is useful.
This patch adds a new --tool option to testrun.sh that makes this easy,
as well as it adds a new option (-c or --in-container) to debugglibc.sh,
which causes the program under test to be ran in a container (with
WAIT_FOR_DEBUGGER=1), then automatically attaches GDB to it.
Automatically detecting if a test case is supposed to be ran inside a
container is harder (if not impossible), as Carlos pointed out [1],
however, this patch makes it easier to do it manually:
Florian Weimer [Tue, 3 Dec 2019 17:48:18 +0000 (18:48 +0100)]
x86: Assume --enable-cet if GCC defaults to CET [BZ #25225]
This links in CET support if GCC defaults to CET. Otherwise, __CET__
is defined, yet CET functionality is not compiled and linked into the
dynamic loader, resulting in a linker failure due to undefined
references to _dl_cet_check and _dl_open_check.
IEEE long double versions of strfroml, strtold, and wcstold have been
prepared, but not exposed (which will only happen when the full support
for IEEE long double is complete). This patch adds tests for these
functions in both IBM and IEEE long double mode.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
ldbl-128ibm-compat: Add tests for strfmon and strfmon_l
This patch adds elementary tests to check that strfmon and strfmon_l
correctly evaluate long double values with IBM Extended Precision and
IEEE binary128 format.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
ldbl-128ibm-compat: Add strfmon_l with IEEE long double format
Similarly to what has been done for printf-like functions, more
specifically to the internal implementation in __vfprintf_internal, this
patch extends __vstrfmon_l_internal to deal with long double values with
binary128 format (as a third format option and reusing the float128
implementation).
Tested for powerpc64le, powerpc64, x86_64, and with build-many-glibcs.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
ldbl-128ibm-compat: Replace http with https in new files
Several commits to the ldbl-128ibm-compat directory added new files
where the URL in the copyright notice pointed to an http, rather than to
an https, address. This happened because I copied the notices before
commit ID 5a82c74822d3. This trivial patch fixes this issue.
Florian Weimer [Fri, 29 Nov 2019 16:55:22 +0000 (17:55 +0100)]
elf: Do not run IFUNC resolvers for LD_DEBUG=unused [BZ #24214]
This commit adds missing skip_ifunc checks to aarch64, arm, i386,
sparc, and x86_64. A new test case ensures that IRELATIVE IFUNC
resolvers do not run in various diagnostic modes of the dynamic
loader.
Reviewed-By: Szabolcs Nagy <szabolcs.nagy@arm.com>
Samuel Thibault [Sun, 1 Dec 2019 20:52:39 +0000 (20:52 +0000)]
hurd: Fix ld.so __access override from libc
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __access happens to have never been exposed, putting it to
GLIBC_PRIVATE.
Samuel Thibault [Sun, 1 Dec 2019 20:48:46 +0000 (20:48 +0000)]
hurd: Fix ld.so __getcwd override from libc
ld.so symbols to be overriden by libc need to be extern to really get
overriden. __getcwd happens to have never been exposed, putting it to
GLIBC_PRIVATE.
Joseph Myers [Fri, 29 Nov 2019 14:18:26 +0000 (14:18 +0000)]
Update kernel version to 5.4 in tst-mman-consts.py.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.4. (There are no new constants covered by this test in 5.4 that
need any other header changes.)
Joseph Myers [Fri, 29 Nov 2019 14:17:15 +0000 (14:17 +0000)]
Update SOMAXCONN value from Linux 5.4.
Linux 5.4 changes the SOMAXCONN value from 128 to 4096 (this isn't in
a uapi header; various constants related to the kernel/userspace
interface, including this one, are in the non-uapi linux/socket.h
header).
This patch increases the value in glibc. As I understand it, it is
safe to use a higher value even with older kernels (the kernel will
simply adjust the value passed to listen to be no more than the value
supported in the kernel), and SOMAXCONN is actually only a default for
a sysctl value in the kernel that can be changed at runtime. So I
think updating the value in glibc is a reasonable and safe thing to
do.
Joseph Myers [Thu, 28 Nov 2019 20:32:09 +0000 (20:32 +0000)]
Update syscall-names.list for Linux 5.4.
This patch updates syscall-names.list for Linux 5.4. There are no new
syscalls, so this is just a matter of updating the version number
listed in the file.
Florian Weimer [Thu, 31 Oct 2019 17:48:43 +0000 (18:48 +0100)]
Move _dl_open_check to its original place in dl_open_worker
This reverts the non-test change from commit d0093c5cefb7f7a4143f
("Call _dl_open_check after relocation [BZ #24259]"), given that
the underlying bug has been fixed properly in commit 61b74477fa7f63
("Remove all loaded objects if dlopen fails, ignoring NODELETE
[BZ #20839]").
Tested on x86-64-linux-gnu, with and without --enable-cet.
Florian Weimer [Thu, 31 Oct 2019 18:30:19 +0000 (19:30 +0100)]
Block signals during the initial part of dlopen
Lazy binding in a signal handler that interrupts a dlopen sees
intermediate dynamic linker state. This has likely been always
unsafe, but with the new pending NODELETE state, this is clearly
incorrect. Other threads are excluded via the loader lock, but the
current thread is not. Blocking signals until right before ELF
constructors run is the safe thing to do.
Florian Weimer [Wed, 13 Nov 2019 14:44:56 +0000 (15:44 +0100)]
Remove all loaded objects if dlopen fails, ignoring NODELETE [BZ #20839]
This introduces a “pending NODELETE” state in the link map, which is
flipped to the persistent NODELETE state late in dlopen, via
activate_nodelete. During initial relocation, symbol binding
records pending NODELETE state only. dlclose ignores pending NODELETE
state. Taken together, this results that a partially completed dlopen
is rolled back completely because new NODELETE mappings are unloaded.
Florian Weimer [Wed, 27 Nov 2019 15:37:17 +0000 (16:37 +0100)]
Avoid late dlopen failure due to scope, TLS slotinfo updates [BZ #25112]
This change splits the scope and TLS slotinfo updates in dlopen into
two parts: one to resize the data structures, and one to actually apply
the update. The call to add_to_global_resize in dl_open_worker is moved
before the demarcation point at which no further memory allocations are
allowed.
_dl_add_to_slotinfo is adjusted to make the list update optional. There
is some optimization possibility here because we could grow the slotinfo
list of arrays in a single call, one the largest TLS modid is known.
This commit does not fix the fatal meory allocation failure in
_dl_update_slotinfo. Ideally, this error during dlopen should be
recoverable.
The update order of scopes and TLS data structures is retained, although
it appears to be more correct to fully initialize TLS first, and then
expose symbols in the newly loaded objects via the scope update.
Florian Weimer [Thu, 31 Oct 2019 17:25:39 +0000 (18:25 +0100)]
Avoid late failure in dlopen in global scope update [BZ #25112]
The call to add_to_global in dl_open_worker happens after running ELF
constructors for new objects. At this point, proper recovery from
malloc failure would be quite complicated: We would have to run the
ELF destructors and close all opened objects, something that we
currently do not do.
Instead, this change splits add_to_global into two phases,
add_to_global_resize (which can raise an exception, called before ELF
constructors run), and add_to_global_update (which cannot, called
after ELF constructors). A complication arises due to recursive
dlopen: After the inner dlopen consumes some space, the pre-allocation
in the outer dlopen may no longer be sufficient. A new member in the
namespace structure, _ns_global_scope_pending_adds keeps track of the
maximum number of objects that need to be added to the global scope.
This enables the inner add_to_global_resize call to take into account
the needs of an outer dlopen.
Most code in the dynamic linker assumes that the number of global
scope entries fits into an unsigned int (matching the r_nlist member
of struct r_scop_elem). Therefore, change the type of
_ns_global_scope_alloc to unsigned int (from size_t), and add overflow
checks.
Florian Weimer [Wed, 27 Nov 2019 15:20:47 +0000 (16:20 +0100)]
Lazy binding failures during dlopen/dlclose must be fatal [BZ #24304]
If a lazy binding failure happens during the execution of an ELF
constructor or destructor, the dynamic loader catches the error
and reports it using the dlerror mechanism. This is undesirable
because there could be other constructors and destructors that
need processing (which are skipped), and the process is in an
inconsistent state at this point. Therefore, we have to issue
a fatal dynamic loader error error and terminate the process.
Note that the _dl_catch_exception in _dl_open is just an inner catch,
to roll back some state locally. If called from dlopen, there is
still an outer catch, which is why calling _dl_init via call_dl_init
and a no-exception is required and cannot be avoiding by moving the
_dl_init call directly into _dl_open.
_dl_fini does not need changes because it does not install an error
handler, so errors are already fatal there.
Florian Weimer [Wed, 30 Oct 2019 16:26:58 +0000 (17:26 +0100)]
resolv: Implement trust-ad option for /etc/resolv.conf [BZ #20358]
This introduces a concept of trusted name servers, for which the
AD bit is passed through to applications. For untrusted name
servers (the default), the AD bit in responses are cleared, to
provide a safe default.
This approach is very similar to the one suggested by Pavel Šimerda
in <https://bugzilla.redhat.com/show_bug.cgi?id=1164339#c15>.
The DNS test framework in support/ is enhanced with support for
setting the AD bit in responses.
Florian Weimer [Fri, 8 Nov 2019 14:48:51 +0000 (15:48 +0100)]
dlsym: Do not determine caller link map if not needed
Obtaining the link map is potentially very slow because it requires
iterating over all loaded objects in the current implementation. If
the caller supplied an explicit handle (i.e., not one of the RTLD_*
constants), the dlsym implementation does not need the identity of the
caller (except in the special case of auditing), so this change
avoids computing it in that case.
Even in the minimal case (dlsym called from a main program linked with
-dl), this shows a small speedup, perhaps around five percent. The
performance improvement can be arbitrarily large in principle (if
_dl_find_dso_for_object has to iterate over many link maps).
Florian Weimer [Fri, 22 Nov 2019 21:10:42 +0000 (22:10 +0100)]
libio: Disable vtable validation for pre-2.1 interposed handles [BZ #25203]
Commit c402355dfa7807b8e0adb27c009135a7e2b9f1b0 ("libio: Disable
vtable validation in case of interposition [BZ #23313]") only covered
the interposable glibc 2.1 handles, in libio/stdfiles.c. The
parallel code in libio/oldstdfiles.c needs similar detection logic.
Similarly to __vfprintf_internal and __vfscanf_internal, the internal
implementation of syslog functions (__vsyslog_internal) takes a
'mode_flags' parameter used to select the format of long double
parameters. This patch adds variants of the syslog functions that set
'mode_flags' to PRINTF_LDBL_USES_FLOAT128, thus enabling the correct
printing of long double values on powerpc64le, when long double has IEEE
binary128 format (-mabi=ieeelongdouble).
Tested for powerpc64le.
Reviewed-by: Florian Weimer <fweimer@redhat.com> Reviewed-by: Joseph Myers <joseph@codesourcery.com> Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Similarly to the functions from the *printf family, this patch adds
implementations for __obstack_*printf* functions that set the
'mode_flags' parameter to PRINTF_LDBL_USES_FLOAT128, before making calls
to __vfprintf_internal (indirectly through __obstack_vprintf_internal).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
ldbl-128ibm-compat: Reuse tests for err.h and error.h functions
Commit IDs 9771e6cb5102 and 7597b0c7f711 added tests for the functions
from err.h and error.h that can take long double parameters.
Afterwards, commit ID f0eaf8627654 reused them on architectures that
changed the long double format from the same as double to something else
(i.e.: architectures that imply ldbl-opt). This patch reuses it again
for IEEE long double on powerpc64le.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __error_at_line_internal and
__error_internal, to provide error.h functions that can take long double
arguments with IEEE binary128 format on platforms where long double can
also take double format or some non-IEEE format (currently, this means
powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use the recently added, internal functions, __vwarnx_internal and
__vwarn_internal, to provide err.h functions that can take long double
arguments with IEEE binary128 format on platforms where long double can
also take double format or some non-IEEE format (currently, this means
powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
ldbl-128ibm-compat: Add argp_error and argp_failure
Use the recently added, internal functions, __argp_error_internal and
__argp_failure_internal, to provide argp_error and argp_failure that can
take long double arguments with IEEE binary128 format on platforms where
long double can also take double format or some non-IEEE format
(currently, this means powerpc64le).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch removes the arch-specific atomic instruction, relying on
compiler builtins. The __sparc32_atomic_locks support is removed
and a configure check is added to check if compiler uses libatomic
to implement CAS.
It also removes the sparc specific sem_* and pthread_barrier_*
implementations. It in turn allows buidling against a LEON3/LEON4
sparcv8 target, although it will still be incompatible with generic
sparcv9.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu. I also checked
with build against sparcv8-linux-gnu with -mcpu=leon3.
Stefan Liebler [Wed, 27 Nov 2019 11:35:40 +0000 (12:35 +0100)]
S390: Fix handling of needles crossing a page in strstr z15 ifunc-variant. [BZ #25226]
If the specified needle crosses a page-boundary, the s390-z15 ifunc variant of
strstr truncates the needle which results in invalid results.
This is fixed by loading the needle beyond the page boundary to v18 instead of v16.
The bug is sometimes observable in test-strstr.c in check1 and check2 as the
haystack and needle is stored on stack. Thus the needle can be on a page boundary.
check2 is now extended to test haystack / needles located on stack, at end of page
and on two pages.
Sandra Loosemore [Thu, 21 Nov 2019 02:10:40 +0000 (19:10 -0700)]
Compile elf/rtld.c with -fno-tree-loop-distribute-patterns.
In GCC 10, the default at -O2 is now -ftree-loop-distribute-patterns.
This optimization causes GCC to "helpfully" convert the hand-written
loop in _dl_start into a call to memset, which is not available that
early in program startup. Similar problems in other places in GLIBC
have been addressed by explicitly building with
-fno-tree-loop-distribute-patterns, but this one may have been
overlooked previously because it only affects targets where
HAVE_BUILTIN_MEMSET is not defined.
This patch fixes a bug observed on nios2-linux-gnu target that caused
all programs to segv on startup.
Now that both pthread_mutex_t and pthread_rwlock_t static initializer
are parametrized in their own headers HPPA pthread.h is identical to
generic nptl one.
This patch adds a default pthread-offsets.h based on default
thread definitions from struct_mutex.h and struct_rwlock.h.
The idea is to simplify new ports inclusion.
git://sourceware.org / glibc.git / log