Wilco Dijkstra [Thu, 7 Jan 2021 15:26:26 +0000 (15:26 +0000)]
Remove dbl-64/wordsize-64 (part 2)
Remove the wordsize-64 implementations by merging them into the main dbl-64
directory. The second patch just moves all wordsize-64 files and removes a
few wordsize-64 uses in comments and Implies files.
Wilco Dijkstra [Thu, 7 Jan 2021 15:02:51 +0000 (15:02 +0000)]
Remove dbl-64/wordsize-64
Remove the wordsize-64 implementations by merging them into the main dbl-64
directory. The first patch adds special cases needed for 32-bit targets
(FIX_INT_FP_CONVERT_ZERO and FIX_DBL_LONG_CONVERT_OVERFLOW) to the
wordsize-64 versions. This has no effect on 64-bit targets since they don't
define these macros.
It sync with gnulib version ae9fb3d66. The testcase for BZ#23741
(stdlib/test-bz22786.c) is adjusted to check also for ENOMEM.
The patch fixes multiple realpath issues:
- Portability fixes for errno clobbering on free (BZ#10635). The
function does not call free directly anymore, although it might be
done through scratch_buffer_free. The free errno clobbering is
being tracked by BZ#17924.
- Pointer arithmetic overflows in realpath (BZ#26592).
- Realpath cyclically call __alloca(path_max) to consume too much
stack space (BZ#26341).
- Realpath mishandles EOVERFLOW; stat not needed anyway (BZ#24970).
The check is done through faccessat now.
alpha: Provide wait4 for static library [BZ #27150]
This ia regression from 09153638cfef91, versioned_symbol acts as
weak_alias for !SHARED but it is undefined to avoid non versioned
alias from the generic implementation.
H.J. Lu [Mon, 28 Dec 2020 13:28:49 +0000 (05:28 -0800)]
x86: Check IFUNC definition in unrelocated executable [BZ #20019]
Calling an IFUNC function defined in unrelocated executable also leads to
segfault. Issue a fatal error message when calling IFUNC function defined
in the unrelocated executable from a shared library.
Samuel Thibault [Mon, 4 Jan 2021 19:22:59 +0000 (20:22 +0100)]
hurd: Fix mmap(!MAP_FIXED) on bogus address
In the !MAP_FIXED case, when a bogus address is given mmap should pick up a
valide address rather than returning EINVAL: Posix only talks about
EINVAL for the MAP_FIXED case.
H.J. Lu [Sat, 25 Jan 2020 22:19:40 +0000 (14:19 -0800)]
x86-64: Avoid rep movsb with short distance [BZ #27130]
When copying with "rep movsb", if the distance between source and
destination is N*4GB + [1..63] with N >= 0, performance may be very
slow. This patch updates memmove-vec-unaligned-erms.S for AVX and
AVX512 versions with the distance in RCX:
cmpl $63, %ecx
// Don't use "rep movsb" if ECX <= 63
jbe L(Don't use rep movsb")
Use "rep movsb"
Benchtests data with bench-memcpy, bench-memcpy-large, bench-memcpy-random
and bench-memcpy-walk on Skylake, Ice Lake and Tiger Lake show that its
performance impact is within noise range as "rep movsb" is only used for
data size >= 4KB.
Shuo Wang [Mon, 4 Jan 2021 12:42:52 +0000 (20:42 +0800)]
aarch64: fix stack missing after sp is updated
After sp is updated, the CFA offset should be set before next instruction.
Tested in glibc-2.28:
Thread 2 "xxxxxxx" hit Breakpoint 1, _dl_tlsdesc_dynamic () at ../sysdeps/aarch64/dl-tlsdesc.S:149
149 stp x1, x2, [sp, #-32]!
Missing separate debuginfos, use: dnf debuginfo-install libgcc-7.3.0-20190804.h24.aarch64
(gdb) bt
#0 _dl_tlsdesc_dynamic () at ../sysdeps/aarch64/dl-tlsdesc.S:149
#1 0x0000ffffbe4fbb44 in OurFunction (threadId=3194870184)
at /home/test/test_function.c:30
#2 0x0000000000400c08 in initaaa () at thread.c:58
#3 0x0000000000400c50 in thread_proc (param=0x0) at thread.c:71
#4 0x0000ffffbf6918bc in start_thread (arg=0xfffffffff29f) at pthread_create.c:486
#5 0x0000ffffbf5669ec in thread_start () at ../sysdeps/unix/sysv/linux/aarch64/clone.S:78
(gdb) ni
_dl_tlsdesc_dynamic () at ../sysdeps/aarch64/dl-tlsdesc.S:150
150 stp x3, x4, [sp, #16]
(gdb) bt
#0 _dl_tlsdesc_dynamic () at ../sysdeps/aarch64/dl-tlsdesc.S:150
#1 0x0000ffffbe4fbb44 in OurFunction (threadId=3194870184)
at /home/test/test_function.c:30
#2 0x0000000000000000 in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
(gdb) ni
_dl_tlsdesc_dynamic () at ../sysdeps/aarch64/dl-tlsdesc.S:157
157 mrs x4, tpidr_el0
(gdb) bt
#0 _dl_tlsdesc_dynamic () at ../sysdeps/aarch64/dl-tlsdesc.S:157
#1 0x0000ffffbe4fbb44 in OurFunction (threadId=3194870184)
at /home/test/test_function.c:30
#2 0x0000000000400c08 in initaaa () at thread.c:58
#3 0x0000000000400c50 in thread_proc (param=0x0) at thread.c:71
#4 0x0000ffffbf6918bc in start_thread (arg=0xfffffffff29f) at pthread_create.c:486
#5 0x0000ffffbf5669ec in thread_start () at ../sysdeps/unix/sysv/linux/aarch64/clone.S:78
Signed-off-by: liqingqing <liqingqing3@huawei.com> Signed-off-by: Shuo Wang <wangshuo47@huawei.com>
Make the tests use TEST_COND_intel96 to decide on whether to build the
unnormal tests instead of the macro in nan-pseudo-number.h and then
drop the header inclusion. This unbreaks test runs on all
architectures that do not have ldbl-96.
Also drop the HANDLE_PSEUDO_NUMBERS macro since it is not used
anywhere.
Paul Eggert [Sat, 2 Jan 2021 19:47:54 +0000 (11:47 -0800)]
Update copyright dates not handled by scripts/update-copyrights.
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
Szabolcs Nagy [Thu, 17 Dec 2020 10:03:05 +0000 (10:03 +0000)]
aarch64: use PTR_ARG and SIZE_ARG instead of DELOUSE
DELOUSE was added to asm code to make them compatible with non-LP64
ABIs, but it is an unfortunate name and the code was not compatible
with ABIs where pointer and size_t are different. Glibc currently
only supports the LP64 ABI so these macros are not really needed or
tested, but for now the name is changed to be more meaningful instead
of removing them completely.
Some DELOUSE macros were dropped: clone, strlen and strnlen used it
unnecessarily.
The out of tree ILP32 patches are currently not maintained and will
likely need a rework to rebase them on top of the time64 changes.
Introduce a new _FORTIFY_SOURCE level of 3 to enable additional
fortifications that may have a noticeable performance impact, allowing
more fortification coverage at the cost of some performance.
With llvm 9.0 or later, this will replace the use of
__builtin_object_size with __builtin_dynamic_object_size.
__builtin_dynamic_object_size is an LLVM builtin that is similar to
__builtin_object_size. In addition to what __builtin_object_size
does, i.e. replace the builtin call with a constant object size,
__builtin_dynamic_object_size will replace the call site with an
expression that evaluates to the object size, thus expanding its
applicability. In practice, __builtin_dynamic_object_size evaluates
these expressions through malloc/calloc calls that it can associate
with the object being evaluated.
A simple motivating example is below; -D_FORTIFY_SOURCE=2 would miss
this and emit memcpy, but -D_FORTIFY_SOURCE=3 with the help of
__builtin_dynamic_object_size is able to emit __memcpy_chk with the
allocation size expression passed into the function:
If the object was allocated elsewhere that the compiler cannot see, or
if it was allocated in the function with a function that the compiler
does not recognize as an allocator then __builtin_dynamic_object_size
also returns -1.
Further, the expression used to compute object size may be non-trivial
and may potentially incur a noticeable performance impact. These
fortifications are hence enabled at a new _FORTIFY_SOURCE level to
allow developers to make a choice on the tradeoff according to their
environment.
Make the _FORTIFY_SOURCE macro soup in features.h warn about
unsupported fortification levels. For example, it will warn about
_FORTIFY_SOURCE=3 and over with an indication of which level has been
selected.
powerpc: Use scv instruction on clone when available
clone already uses r31 to temporarily save input arguments before doing the
syscall, so we use a different register to read from the TCB. We can also avoid
allocating another stack frame, which is not needed since we can simply extend
the usage of the red zone.
Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com> Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
powerpc: Runtime selection between sc and scv for syscalls
Linux kernel v5.9 added support for system calls using the scv
instruction for POWER9 and later. The new codepath provides better
performance (see below) if compared to using sc. For the
foreseeable future, both sc and scv mechanisms will co-exist, so this
patch enables glibc to do a runtime check and use scv when it is
available.
Before issuing the system call to the kernel, we check hwcap2 in the TCB
for PPC_FEATURE2_SCV to see if scv is supported by the kernel. If not,
we fallback to sc and keep the old behavior.
The kernel implements a different error return convention for scv, so
when returning from a system call we need to handle the return value
differently depending on the instruction we used to enter the kernel.
For syscalls implemented in ASM, entry and exit are implemented by
different macros (PSEUDO and PSEUDO_RET, resp.), which may be used in
sequence (e.g. for templated syscalls) or with other instructions in
between (e.g. clone). To avoid accessing the TCB a second time on
PSEUDO_RET to check which instruction we used, the value read from
hwcap2 is cached on a non-volatile register.
This is not needed when using INTERNAL_SYSCALL macro, since entry and
exit are bundled into the same inline asm directive.
The dynamic loader may issue syscalls before the TCB has been setup
so it always uses sc with no extra checks. For the static case, there
is no compile-time way to determine if we are inside startup code,
so we also check the value of the thread pointer before effectively
accessing the TCB. For such situations in which the availability of
scv cannot be determined, sc is always used.
Support for scv in syscalls implemented in their own ASM file (clone and
vfork) will be added later. For now simply use sc as before.
Average performance over 1M calls for each syscall "type":
- stat: C wrapper calling INTERNAL_SYSCALL
- getpid: templated ASM syscall
- syscall: call to gettid using syscall function
Standard:
stat : 1.573445 us / ~3619 cycles
getpid : 0.164986 us / ~379 cycles
syscall : 0.162743 us / ~374 cycles
With scv:
stat : 1.537049 us / ~3535 cycles <~ -84 cycles / -2.32%
getpid : 0.109923 us / ~253 cycles <~ -126 cycles / -33.25%
syscall : 0.116410 us / ~268 cycles <~ -106 cycles / -28.34%
Tested on powerpc, powerpc64, powerpc64le (with and without scv)
Tested-by: Lucas A. M. Magalhães <lamm@linux.ibm.com> Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
With xmknod wrapper functions removed (589260cef8), the mknod functions
are now properly exported, and version is done using symbols versioning
instead of the extra _MKNOD_* argument.
It also allows us to consolidate Linux and Hurd mknod implementation.
With xstat wrapper functions removed (8ed005daf0), the stat functions
are now properly exported, and version is done using symbols versioning
instead of the extra _STAT_* argument.
Paul Eggert [Tue, 29 Dec 2020 08:45:49 +0000 (00:45 -0800)]
free: preserve errno [BZ#17924]
In the next release of POSIX, free must preserve errno
<https://www.austingroupbugs.net/view.php?id=385>.
Modify __libc_free to save and restore errno, so that
any internal munmap etc. syscalls do not disturb the caller's errno.
Add a test malloc/tst-free-errno.c (almost all by Bruno Haible),
and document that free preserves errno.
Samuel Thibault [Mon, 28 Dec 2020 22:37:04 +0000 (23:37 +0100)]
hurd: Add WSTOPPED/WCONTINUED/WEXITED/WNOWAIT support [BZ #23091]
The new __proc_waitid RPC now expects WEXITED to be passed, allowing to
properly implement waitid, and thus define the missing W* macros
(according to FreeBSD values).
Samuel Thibault [Mon, 28 Dec 2020 22:05:14 +0000 (23:05 +0100)]
support: Make support_process_state_wait wait less
Tests such as posix/tst-waitid.c make heavy use of
support_process_state_wait, and thus on non-Linux where it falls back
to sleeping, a 2s sleep makes such test time out, while 1s remains
fine enough.
Samuel Thibault [Sat, 26 Dec 2020 16:57:52 +0000 (17:57 +0100)]
hurd: set sigaction for signal preemptors in arch-independent file
Instead of having the arch-specific trampoline setup code detect whether
preemption happened or not, we'd rather pass it the sigaction. In the
future, this may also allow to change sa_flags from post_signal().
Do not attempt to fix the significand top bit in long double input
received in printf. The code should never reach here because isnan
should now detect unnormals as NaN. This is already a NOP for glibc
since it uses the gcc __builtin_isnan, which detects unnormals as NaN.
The MTE patch to add malloc support incorrectly padded the size passed
to _int_realloc by SIZE_SZ when it ought to have sent just the
chunksize. Revert that bit of the change so that realloc works
correctly with MALLOC_CHECK_ set.
This also brings the realloc_check implementation back in sync with
libc_realloc.
tests-mcheck: New variable to run tests with MALLOC_CHECK_=3
This new variable allows various subsystems in glibc to run all or
some of their tests with MALLOC_CHECK_=3. This patch adds
infrastructure support for this variable as well as an implementation
in malloc/Makefile to allow running some of the tests with
MALLOC_CHECK_=3.
At present some tests in malloc/ have been excluded from the mcheck
tests either because they're specifically testing MALLOC_CHECK_ or
they are failing in master even without the Memory Tagging patches
that prompted this work. Some tests were reviewed and found to need
specific error points that MALLOC_CHECK_ defeats by terminating early
but a thorough review of all tests is needed to bring them into mcheck
coverage.
The following failures are seen in current master:
addmntent: Remove unbounded alloca usage from getmntent [BZ#27083]
The addmntent function replicates elements of struct mnt on stack
using alloca, which is unsafe. Put characters directly into the
stream, escaping them as they're being written out.
Also add a test to check all escaped characters with addmntent and
getmntent.
Richard Earnshaw [Mon, 21 Dec 2020 15:03:03 +0000 (15:03 +0000)]
aarch64: Add sysv specific enabling code for memory tagging
Add various defines and stubs for enabling MTE on AArch64 sysv-like
systems such as Linux. The HWCAP feature bit is copied over in the
same way as other feature bits. Similarly we add a new wrapper header
for mman.h to define the PROT_MTE flag that can be used with mmap and
related functions.
We add a new field to struct cpu_features that can be used, for
example, to check whether or not certain ifunc'd routines should be
bound to MTE-safe versions.
Finally, if we detect that MTE should be enabled (ie via the glibc
tunable); we enable MTE during startup as required.
Support in the Linux kernel was added in version 5.10.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Richard Earnshaw [Mon, 21 Dec 2020 15:03:03 +0000 (15:03 +0000)]
linux: Add compatibility definitions to sys/prctl.h for MTE
Older versions of the Linux kernel headers obviously lack support for
memory tagging, but we still want to be able to build in support when
using those (obviously it can't be enabled on such systems).
The linux kernel extensions are made to the platform-independent
header (linux/prctl.h), so this patch takes a similar approach.
Richard Earnshaw [Mon, 21 Dec 2020 15:03:03 +0000 (15:03 +0000)]
malloc: Basic support for memory tagging in the malloc() family
This patch adds the basic support for memory tagging.
Various flavours are supported, particularly being able to turn on
tagged memory at run-time: this allows the same code to be used on
systems where memory tagging support is not present without neededing
a separate build of glibc. Also, depending on whether the kernel
supports it, the code will use mmap for the default arena if morecore
does not, or cannot support tagged memory (on AArch64 it is not
available).
All the hooks use function pointers to allow this to work without
needing ifuncs.
Richard Earnshaw [Mon, 21 Dec 2020 15:03:03 +0000 (15:03 +0000)]
elf: Add a tunable to control use of tagged memory
Add a new glibc tunable: mem.tagging. This is a decimal constant in
the range 0-255 but used as a bit-field.
Bit 0 enables use of tagged memory in the malloc family of functions.
Bit 1 enables precise faulting of tag failure on platforms where this
can be controlled.
Other bits are currently unused, but if set will cause memory tag
checking for the current process to be enabled in the kernel.
Richard Earnshaw [Mon, 21 Dec 2020 15:03:03 +0000 (15:03 +0000)]
config: Allow memory tagging to be enabled when configuring glibc
This patch adds the configuration machinery to allow memory tagging to be
enabled from the command line via the configure option --enable-memory-tagging.
The current default is off, though in time we may change that once the API
is more stable.
Matt Turner [Mon, 21 Dec 2020 12:09:43 +0000 (09:09 -0300)]
alpha: Remove anonymous union in struct stat [BZ #27042]
This is clever, but it confuses downstream detection in at least zstd
and GNOME's glib. zstd has preprocessor tests for the 'st_mtime' macro,
which is not provided by the path using the anonymous union; glib checks
for the presence of 'st_mtimensec' in struct stat but then tries to
access that field in struct statx (which might be a bug on its own).
setjmp() uses C code to store current registers into jmp_buf
environment. -fstack-protector-all places canary into setjmp()
prologue and clobbers 'a5' before it gets saved.
The change inhibits stack canary injection to avoid clobber.
Andreas Schwab [Mon, 21 Dec 2020 03:26:43 +0000 (08:56 +0530)]
Fix buffer overrun in EUC-KR conversion module (bz #24973)
The byte 0xfe as input to the EUC-KR conversion denotes a user-defined
area and is not allowed. The from_euc_kr function used to skip two bytes
when told to skip over the unknown designation, potentially running over
the buffer end.
Richard Braun [Mon, 21 Dec 2020 01:10:16 +0000 (02:10 +0100)]
Hurd: make sigstates hold a reference on thread ports
This change is required in order to correctly release per-thread
resources. Directly reusing the threading library reference isn't
possible since the sigstate is also used early in the main thread,
before threading is initialized.
* hurd/hurd/signal.h (_hurd_self_sigstate): Drop thread reference after
calling _hurd_thread_sigstate.
(_hurd_critical_section_lock): Likewise.
* hurd/hurdsig.c (_hurd_thread_sigstate): Add a reference on the thread.
(_hurd_sigstate_delete): Drop thread reference.
Samuel Thibault [Mon, 21 Dec 2020 01:02:47 +0000 (02:02 +0100)]
profil-counter: Add missing SIGINFO case
When SA_SIGINFO is available, sysdeps/posix/s?profil.c use it, so we have to
fix the __profil_counter function accordingly, using sigcontextinfo.h's
sigcontext_get_pc.
Jeremie Koenig [Mon, 21 Dec 2020 00:41:55 +0000 (01:41 +0100)]
hurd: implement SA_SIGINFO signal handlers.
SA_SIGINFO is actually just another way of expressing what we were
already passing over with struct sigcontext. This just introduces the
SIGINFO interface and fixes the posix values when that interface is
requested by the application.
Anssi Hannula [Mon, 27 Jan 2020 10:45:10 +0000 (12:45 +0200)]
ieee754: Remove slow paths from asin and acos
asin and acos have slow paths for rounding the last bit that cause some
calls to be 500-1500x slower than average calls.
These slow paths are rare, a test of a trillion (1.000.000.000.000)
random inputs between -1 and 1 showed 32870 slow calls for acos and 4473
for asin, with most occurrences between -1.0 .. -0.9 and 0.9 .. 1.0.
The slow paths claim correct rounding and use __sin32() and __cos32()
(which compare two result candidates and return the closest one) as the
final step, with the second result candidate (res1) having a small offset
applied from res. This suggests that res and res1 are intended to be 1
ULP apart (which makes sense for rounding), barring bugs, allowing us to
pick either one and still remain within 1 ULP of the exact result.
Remove the slow paths as the accuracy is better than 1 ULP even without
them, which is enough for glibc.
Also remove code comments claiming correctly rounded results.
After slow path removal, checking the accuracy of 14.400.000.000 random
asin() and acos() inputs showed only three incorrectly rounded
(error > 0.5 ULP) results:
- asin(-0x1.ee2b43286db75p-1) (0.500002 ULP, same as before)
- asin(-0x1.f692ba202abcp-4) (0.500003 ULP, same as before)
- asin(-0x1.9915e876fc062p-1) (0.50000000001 ULP, previously exact)
The first two had the same error even before this commit, and they did
not use the slow path at all.
Checking 4934 known randomly found previously-slow-path asin inputs
shows 25 calls with incorrectly rounded results, with a maximum error of
0.500000002 ULP (for 0x1.fcd5742999ab8p-1). The previous slow-path code
rounded all these inputs correctly (error < 0.5 ULP).
The observed average speed increase was 130x.
Checking 36240 known randomly found previously-slow-path acos inputs
shows 42 calls with incorrectly rounded results, with a maximum error of
0.500000008 ULP (for 0x1.f63845056f35ep-1). The previous "exact"
slow-path code showed 34 calls with incorrectly rounded results, with the
same maximum error of 0.500000008 ULP (for 0x1.f63845056f35ep-1).
The observed average speed increase was 130x.
The functions could likely be trimmed more while keeping acceptable
accuracy, but this at least gets rid of the egregiously slow cases.
Joseph Myers [Thu, 17 Dec 2020 16:17:59 +0000 (16:17 +0000)]
Update kernel version to 5.10 in tst-mman-consts.py.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.10. (There are no new MAP_* constants covered by this test in
5.10 that need any other header changes.)
Stefan Liebler [Tue, 15 Dec 2020 14:18:03 +0000 (15:18 +0100)]
s390x: Require GCC 7.1 or later to build glibc.
GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.: 785969a047ad2f23f758901c6816422573544453
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
Florian Weimer [Wed, 16 Dec 2020 14:09:52 +0000 (15:09 +0100)]
malloc: Use __libc_initial to detect an inner libc
The secondary/non-primary/inner libc (loaded via dlmopen, LD_AUDIT,
static dlopen) must not use sbrk to allocate member because that would
interfere with allocations in the outer libc. On Linux, this does not
matter because sbrk itself was changed to fail in secondary libcs.
_dl_addr occasionally shows up in profiles, but had to be used before
because __libc_multiple_libs was unreliable. So this change achieves
a slight reduction in startup time.
Florian Weimer [Wed, 16 Dec 2020 14:09:52 +0000 (15:09 +0100)]
Replace __libc_multiple_libcs with __libc_initial flag
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
places used symbols in SECTION_RETAIN sections if assembler supports it.
Mark __libc_freeres_fn as used to avoid
gconv_dl.c: In function 'free_mem':
gconv_dl.c:191:1: error: 'do_release_all' without 'used' attribute and 'free_mem' with 'used' attribute are placed in a section with the same name [-Werror=attributes]
191 | do_release_all (void *nodep)
| ^~~~~~~~~~~~~~
In file included from <command-line>:
gconv_dl.c:202:18: note: 'free_mem' was declared here
202 | libc_freeres_fn (free_mem)
| ^~~~~~~~
./../include/libc-symbols.h:316:15: note: in definition of macro 'libc_freeres_fn'
316 | static void name (void)
| ^~~~
cc1: all warnings being treated as errors
Joseph Myers [Wed, 16 Dec 2020 02:08:52 +0000 (02:08 +0000)]
Update syscall lists for Linux 5.10.
Linux 5.10 has one new syscall, process_madvise. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.