The per-thread state is refactored two use two strategies:
1. The default one uses a TLS structure, which will be placed in the
static TLS space (using __thread keyword).
2. Linux allocates via struct pthread and access it through THREAD_*
macros.
The default strategy has the disadvantage of increasing libc.so static
TLS consumption and thus decreasing the possible surplus used in
some scenarios (which might be mitigated by BZ#25051 fix).
It is used only on Hurd, where accessing the thread storage in the in
single thread case is not straightforward (afaiu, Hurd developers could
correct me here).
The fallback static allocation used for allocation failure is also
removed: defining its size is problematic without synchronizing with
translated messages (to avoid partial translation) and the resulting
usage is not thread-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The __NSIG_WORDS value is based on minimum number of words to hold
the maximum number of signals supported by the architecture.
This patch also adds __NSIG_BYTES, which is the number of bytes
required to represent the supported number of signals. It is used in
syscalls which takes a sigset_t.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
It refactor how signals are defined by each architecture. Instead of
include a generic header (bits/signum-generic.h) and undef non-default
values in an arch specific header (bits/signum.h) the new scheme uses a
common definition (bits/signum-generic.h) and each architectures add
its specific definitions on a new header (bits/signum-arch.h).
For Linux it requires copy some system default definitions to alpha,
hppa, and sparc. They are historical values and newer ports uses
the generic Linux signum-arch.h.
For Hurd the BSD signum is removed and moved to a new header (it is
used currently only on Hurd).
Checked on a build against all affected ABIs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Joseph Myers [Tue, 7 Jul 2020 14:54:12 +0000 (14:54 +0000)]
Remove most vfprintf width/precision-dependent allocations (bug 14231, bug 26211).
The vfprintf implementation (used for all printf-family functions)
contains complicated logic to allocate internal buffers of a size
depending on the width and precision used for a format, using either
malloc or alloca depending on that size, and with consequent checks
for size overflow and allocation failure.
As noted in bug 26211, the version of that logic used when '$' plus
argument number formats are in use is missing the overflow checks,
which can result in segfaults (quite possibly exploitable, I didn't
try to work that out) when the width or precision is in the range
0x7fffffe0 through 0x7fffffff (maybe smaller values as well in the
wprintf case on 32-bit systems, when the multiplication by sizeof
(CHAR_T) can overflow).
All that complicated logic in fact appears to be useless. As far as I
can tell, there has been no need (outside the floating-point printf
code, which does its own allocations) for allocations depending on
width or precision since commit 3e95f6602b226e0de06aaff686dc47b282d7cc16 ("Remove limitation on size
of precision for integers", Sun Sep 12 21:23:32 1999 +0000). Thus,
this patch removes that logic completely, thereby fixing both problems
with excessive allocations for large width and precision for
non-floating-point formats, and the problem with missing overflow
checks with such allocations. Note that this does have the
consequence that width and precision up to INT_MAX are now allowed
where previously INT_MAX / sizeof (CHAR_T) - EXTSIZ or more would have
been rejected, so could potentially expose any other overflows where
the value would previously have been rejected by those removed checks.
I believe this completely fixes bugs 14231 and 26211.
Excessive allocations are still possible in the floating-point case
(bug 21127), as are other integer or buffer overflows (see bug 26201).
This does not address the cases where a precision larger than INT_MAX
(embedded in the format string) would be meaningful without printf's
return value overflowing (when it's used with a string format, or %g
without the '#' flag, so the actual output will be much smaller), as
mentioned in bug 17829 comment 8; using size_t internally for
precision to handle that case would be complicated by struct
printf_info being a public ABI. Nor does it address the matter of an
INT_MIN width being negated (bug 17829 comment 7; the same logic
appears a second time in the file as well, in the form of multiplying
by -1). There may be other sources of memory allocations with malloc
in printf functions as well (bug 24988, bug 16060). From inspection,
I think there are also integer overflows in two copies of "if ((width
-= len) < 0)" logic (where width is int, len is size_t and a very long
string could result in spurious padding being output on a 32-bit
system before printf overflows the count of output characters).
elf: Do not signal LA_ACT_CONSISTENT for an empty namespace [BZ #26076]
The auditing interface identifies namespaces by their first loaded
module. Once the namespace is empty, it is no longer possible to signal
LA_ACT_CONSISTENT for it because the first loaded module is already gone
at that point.
Joseph Myers [Mon, 6 Jul 2020 16:18:02 +0000 (16:18 +0000)]
Use C2x return value from getpayload of non-NaN (bug 26073).
In TS 18661-1, getpayload had an unspecified return value for a
non-NaN argument, while C2x requires the return value -1 in that case.
This patch implements the return value of -1. I don't think this is
worth having a new symbol version that's an alias of the old one,
although occasionally we do that in such cases where the new function
semantics are a refinement of the old ones (to avoid programs relying
on the new semantics running on older glibc versions but not behaving
as intended).
Tested for x86_64 and x86; also ran math/ tests for aarch64 and
powerpc.
H.J. Lu [Mon, 6 Jul 2020 13:57:08 +0000 (06:57 -0700)]
x86: Detect Extended Feature Disable (XFD)
An extension called extended feature disable (XFD) is an extension added
for Intel AMX to the XSAVE feature set that allows an operating system
to enable a feature while preventing specific user threads from using
the feature.
Florian Weimer [Wed, 20 May 2020 13:40:35 +0000 (15:40 +0200)]
Add the __libc_single_threaded variable
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
These tests validate that rseq is registered from various execution
contexts (main thread, destructor, other threads, other threads created
from destructor, forked process (without exec), pthread_atfork handlers,
pthread setspecific destructors, signal handlers, atexit handlers).
tst-rseq.c only links against libc.so, testing registration of rseq in
a non-multithreaded environment.
tst-rseq-nptl.c also links against libpthread.so, testing registration
of rseq in a multithreaded environment.
See the Linux kernel selftests for extensive rseq stress-tests.
Linux: Perform rseq registration at C startup and thread creation
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
Samuel Thibault [Sun, 5 Jul 2020 17:21:45 +0000 (19:21 +0200)]
tst-cancel4: deal with ENOSYS errors
The Hurd port doesn't have support for sigwaitinfo, sigtimedwait, and msgget
yet, so let us ignore the test for these when they return ENOSYS.
* nptl/tst-cancel4.c (tf_sigwaitinfo): Fallback on sigwait when
sigwaitinfo returns ENOSYS.
(tf_sigtimedwait): Likewise with sigtimedwait.
(tf_msgrcv, tf_msgsnd): Fallback on tf_usleep when msgget returns ENOSYS.
manual: Show copyright information not just in the printed manual
@insertcopying was not used at all in the Info and HTML versions.
As a result, the notices that need to be present according to the
GNU Free Documentation License were missing.
This commit shows these notices above the table of contents in the
HTML version, and as part of the Main Menu node in the Info version.
Remove the "This file documents" line because it is redundant with the
following line.
Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Bug 26137 reports spurious "inexact" exceptions from strtod, on 32-bit
systems only, for a decimal argument that is exactly 1 + 2^-32. In
fact the same issue also appears for 1 + 2^-64 and 1 + 2^-96 as
arguments to strtof128 on 32-bit systems, and 1 + 2^-64 as an argument
to strtof128 on 64-bit systems. In FE_DOWNWARD or FE_TOWARDZERO mode,
the return value is also incorrect.
The problem is in the multiple-precision division logic used in the
case of dividing by a denominator that occupies at least three GMP
limbs. There was a comment "The division does not work if the upper
limb of the two-limb mumerator is greater than the denominator.", but
in fact there were problems for the case of equality (that is, where
the high limbs are equal, offset by some multiple of the GMP limb
size) as well. In such cases, the code used "quot = ~(mp_limb_t) 0;"
(with subsequent correction if that is an overestimate), because
udiv_qrnnd does not support the case of equality, but it's possible
for the shifted numerator to be greater than or equal to the
denominator, in which case that is an underestimate. To avoid that,
this patch changes the ">" condition to ">=", meaning the first
division is done with a zero high word.
The tests added are all 1 + 2^-n for n from 1 to 113 except for those
that were already present in tst-strtod-round-data.
Joseph Myers [Mon, 29 Jun 2020 14:06:32 +0000 (14:06 +0000)]
Update kernel version to 5.7 in tst-mman-consts.py.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.7. (There are no new constants covered by this test in 5.7 that
need any other header changes; there's a new MREMAP_DONTUNMAP, but
this test doesn't yet cover MREMAP_*.)
Samuel Thibault [Sun, 28 Jun 2020 22:41:18 +0000 (22:41 +0000)]
hurd: Add remaining cancelation points
* hurd/hurdselect.c: Include <sysdep-cancel.h>.
(_hurd_select): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/hurd/accept4.c: Include <sysdep-cancel.h>.
(__libc_accept4): Surround call to __socket_accept with enabling async cancel,
and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/connect.c: Include <sysdep-cancel.h>.
(__connect): Surround call to __file_name_lookup and __socket_connect
with enabling async cancel, and use HURD_DPORT_USE_CANCEL instead of
HURD_DPORT_USE.
* sysdeps/mach/hurd/fdatasync.c: Include <sysdep-cancel.h>.
(fdatasync): Surround call to __file_sync with enabling async cancel, and use
HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/fsync.c: Include <sysdep-cancel.h>.
(fsync): Surround call to __file_sync with enabling async cancel, and use
HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/ioctl.c: Include <sysdep-cancel.h>.
(__ioctl): When request is TIOCDRAIN, surround call to send_rpc with enabling
async cancel, and use HURD_DPORT_USE_CANCEL instead of HURD_DPORT_USE.
* sysdeps/mach/hurd/msync.c: Include <sysdep-cancel.h>.
(msync): Surround call to __vm_object_sync with enabling async cancel.
* sysdeps/mach/hurd/sigsuspend.c: Include <sysdep-cancel.h>.
(__sigsuspend): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/hurd/sigwait.c: Include <sysdep-cancel.h>.
(__sigwait): Surround wait code with enabling async cancel.
* sysdeps/mach/msync.c: Include <sysdep-cancel.h>.
(msync): Surround call to __vm_msync with enabling async cancel.
* sysdeps/mach/sleep.c: Include <sysdep-cancel.h>.
(__sleep): Surround call to __mach_msg with enabling async cancel.
* sysdeps/mach/usleep.c: Include <sysdep-cancel.h>.
(usleep): Surround call to __vm_msync with enabling async cancel.
Samuel Thibault [Sun, 28 Jun 2020 18:18:43 +0000 (18:18 +0000)]
hurd: Make fcntl(F_SETLKW*) cancellation points
and add _nocancel variant.
* sysdeps/mach/hurd/Makefile [io] (sysdep_routines): Add fcntl_nocancel.
* sysdeps/mach/hurd/fcntl.c [NOCANCEL]: Include <not-cancel.h>.
[!NOCANCEL]: Include <sysdep-cancel.h>.
(__libc_fcntl) [!NOCANCEL]: Surround __file_record_lock call with enabling async cancel, and use HURD_FD_PORT_USE_CANCEL instead of HURD_FD_PORT_USE.
* sysdeps/mach/hurd/fcntl_nocancel.c: New file, defines __fcntl_nocancel by including fcntl.c.
* sysdeps/mach/hurd/not-cancel.h (__fcntl64_nocancel): Replace macro with
__fcntl_nocancel declaration with hidden proto, and make
__fcntl64_nocancel call __fcntl_nocancel.
Samuel Thibault [Sun, 28 Jun 2020 16:54:49 +0000 (16:54 +0000)]
hurd: make wait4 a cancellation point
and add _nocancel variant.
* sysdeps/mach/hurd/Makefile [io] (sysdep_routines): Add wait4_nocancel.
* sysdeps/mach/hurd/wait4.c: Include <sysdep-cancel.h>
(__wait4): Surround __proc_wait with enabling async cancel, and use
__USEPORT_CANCEL instead of __USEPORT.
* sysdeps/mach/hurd/wait4_nocancel.c: New file, contains previous
implementation of __wait4.
* sysdeps/mach/hurd/not-cancel.h (__waitpid_nocancel): Replace macro with
__wait4_nocancel declaration with hidden proto, and make
__waitpid_nocancel call __wait4_nocancel.
Samuel Thibault [Sun, 28 Jun 2020 00:15:56 +0000 (00:15 +0000)]
hurd: clean fd and port on thread cancel
HURD_*PORT_USE link fd and port with a stack-stored structure, so on
thread cancel we need to cleanup this.
* hurd/fd-cleanup.c: New file.
* hurd/port-cleanup.c (_hurd_port_use_cleanup): New function.
* hurd/Makefile (routines): Add fd-cleanup.
* sysdeps/hurd/include/hurd.h (__USEPORT_CANCEL): New macro.
* sysdeps/hurd/include/hurd/fd.h (_hurd_fd_port_use_data): New
structure.
(_hurd_fd_port_use_cleanup): New prototype.
(HURD_DPORT_USE_CANCEL, HURD_FD_PORT_USE_CANCEL): New macros.
* sysdeps/hurd/include/hurd/port.h (_hurd_port_use_data): New structure.
(_hurd_port_use_cleanup): New prototype.
(HURD_PORT_USE_CANCEL): New macro.
* hurd/hurd/fd.h (HURD_FD_PORT_USE): Also refer to HURD_FD_PORT_USE_CANCEL.
* hurd/hurd.h (__USEPORT): Also refer to __USEPORT_CANCEL.
* hurd/hurd/port.h (HURD_PORT_USE): Also refer to HURD_PORT_USE_CANCEL.
* hurd/fd-read.c (_hurd_fd_read): Call HURD_FD_PORT_USE_CANCEL instead
of HURD_FD_PORT_USE.
* hurd/fd-write.c (_hurd_fd_write): Likewise.
* sysdeps/mach/hurd/send.c (__send): Call HURD_DPORT_USE_CANCEL instead
of HURD_DPORT_USE.
* sysdeps/mach/hurd/sendmsg.c (__libc_sendmsg): Likewise.
* sysdeps/mach/hurd/sendto.c (__sendto): Likewise.
* sysdeps/mach/hurd/recv.c (__recv): Likewise.
* sysdeps/mach/hurd/recvfrom.c (__recvfrom): Likewise.
* sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Call __USEPORT_CANCEL
instead of __USEPORT, and HURD_DPORT_USE_CANCEL instead of
HURD_DPORT_USE.
Samuel Thibault [Sat, 27 Jun 2020 18:33:52 +0000 (18:33 +0000)]
htl: Move cleanup handling to non-private libc-lock
This adds sysdeps/htl/libc-lock.h which augments sysdeps/mach/libc-lock.h with
the htl-aware cleanup handling. Otherwise inclusion of libc-lock.h
without libc-lockP.h would keep only the mach-aware handling.
This also fixes cleanup getting called when the binary is
statically-linked without libpthread.
* sysdeps/htl/libc-lockP.h (__libc_cleanup_region_start,
__libc_cleanup_end, __libc_cleanup_region_end,
__pthread_get_cleanup_stack): Move to...
* sysdeps/htl/libc-lock.h: ... new file.
(__libc_cleanup_region_start): Always set handler and arg.
(__libc_cleanup_end): Always call the cleanup handler.
(__libc_cleanup_push, __libc_cleanup_pop): New macros.
Samuel Thibault [Sat, 27 Jun 2020 12:20:24 +0000 (12:20 +0000)]
htl: Fix includes for lockfile
These only need exactly to use __libc_ptf_call.
* sysdeps/htl/flockfile.c: Include <libc-lockP.h> instead of
<libc-lock.h>
* sysdeps/htl/ftrylockfile.c: Include <libc-lockP.h> instead of
<errno.h>, <pthread.h>, <stdio-lock.h>
* sysdeps/htl/funlockfile.c: Include <libc-lockP.h> instead of
<pthread.h> and <stdio-lock.h>
* sysdeps/mach/hurd/htl/pt-docancel.c: Include <hurd/signal.h>
(__pthread_do_cancel): Lock target thread's critical_section_lock and ss
lock around thread mangling.
Samuel Thibault [Fri, 26 Jun 2020 20:44:30 +0000 (22:44 +0200)]
tst-cancel4-common.c: fix calling socketpair
PF_UNIX was actually never intended to be passed as protocol parameter to
socket() calls: it is a protocol family, not a protocol. It happens that
Linux introduced accepting it during its 2.0 development, but it shouldn't.
OpenBSD kernels accept it as well, but FreeBSD and NetBSD rightfully do not.
GNU/Hurd does not either.
* nptl/tst-cancel4-common.c (do_test): Pass 0 instead of PF_UNIX as
protocol.
H.J. Lu [Thu, 25 Jun 2020 22:12:57 +0000 (15:12 -0700)]
x86: Detect Intel Advanced Matrix Extensions
Intel Advanced Matrix Extensions (Intel AMX) is a new programming
paradigm consisting of two components: a set of 2-dimensional registers
(tiles) representing sub-arrays from a larger 2-dimensional memory image,
and accelerators able to operate on tiles. Intel AMX is an extensible
architecture. New accelerators can be added and the existing accelerator
may be enhanced to provide higher performance. The initial features are
AMX-BF16, AMX-TILE and AMX-INT8, which are usable only if the operating
system supports both XTILECFG state and XTILEDATA state.
Add AMX-BF16, AMX-TILE and AMX-INT8 support to HAS_CPU_FEATURE and
CPU_FEATURE_USABLE.
Stefan Liebler [Fri, 26 Jun 2020 07:45:11 +0000 (09:45 +0200)]
S390: Optimize __memset_z196.
It turned out that an 256b-mvc instruction which depends on the
result of a previous 256b-mvc instruction is counterproductive.
Therefore this patch adjusts the 256b-loop by storing the
first byte with stc and setting the remaining 255b with mvc.
Now the 255b-mvc instruction depends on the stc instruction.
Stefan Liebler [Fri, 26 Jun 2020 07:45:11 +0000 (09:45 +0200)]
S390: Optimize __memcpy_z196.
This patch introduces an extra loop without pfd instructions
as it turned out that the pfd instructions are usefull
for copies >=64KB but are counterproductive for smaller copies.
Szabolcs Nagy [Wed, 24 Jun 2020 06:47:15 +0000 (07:47 +0100)]
nptl: Don't madvise user provided stack
User provided stack should not be released nor madvised at
thread exit because it's owned by the user.
If the memory is shared or file based then MADV_DONTNEED
can have unwanted effects. With memory tagging on aarch64
linux the tags are dropped and thus it may invalidate
pointers.
Samuel Thibault [Wed, 24 Jun 2020 00:18:45 +0000 (00:18 +0000)]
htl: Fix case when sem_*wait is canceled while holding a token
* sysdeps/htl/sem-timedwait.c (struct cancel_ctx): Add cancel_wake
field.
(cancel_hook): When unblocking thread, set cancel_wake field to 1.
(__sem_timedwait_internal): Set cancel_wake field to 0 by default.
On cancellation exit, check whether we hold a token, to be put back.
Samuel Thibault [Tue, 23 Jun 2020 22:43:32 +0000 (22:43 +0000)]
htl: Make sem_*wait cancellations points
By aligning its implementation on pthread_cond_wait.
* sysdeps/htl/sem-timedwait.c (cancel_ctx): New structure.
(cancel_hook): New function.
(__sem_timedwait_internal): Check for cancellation and register
cancellation hook that wakes the thread up, and check again for
cancellation on exit.
* nptl/tst-cancel13.c, nptl/tst-cancelx13.c: Move to...
* sysdeps/pthread/: ... here.
* nptl/Makefile: Move corresponding references and rules to...
* sysdeps/pthread/Makefile: ... here.
Samuel Thibault [Tue, 23 Jun 2020 22:00:53 +0000 (22:00 +0000)]
htl: Enable tst-cancel25 test
* nptl/tst-cancel25.c: Move to...
* sysdeps/pthread/tst-cancel25.c: ... here.
(tf2) Do not test for SIGCANCEL when it is not defined.
* nptl/Makefile: Move corresponding reference to...
* sysdeps/pthread/Makefile: ... here.
Linux commit ID ee988c11acf6f9464b7b44e9a091bf6afb3b3a49 reserved 2 new
bits in AT_HWCAP2:
- PPC_FEATURE2_ARCH_3_1 indicates the availability of the POWER ISA
3.1;
- PPC_FEATURE2_MMA indicates the availability of the Matrix-Multiply
Assist facility.
Alex Butler [Tue, 16 Jun 2020 12:44:24 +0000 (12:44 +0000)]
aarch64: MTE compatible strncmp
Add support for MTE to strncmp. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Alex Butler [Tue, 16 Jun 2020 12:42:38 +0000 (12:42 +0000)]
aarch64: MTE compatible strcmp
Add support for MTE to strcmp. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Alex Butler [Tue, 9 Jun 2020 16:09:36 +0000 (16:09 +0000)]
aarch64: MTE compatible strrchr
Add support for MTE to strrchr. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Alex Butler [Tue, 9 Jun 2020 16:08:07 +0000 (16:08 +0000)]
aarch64: MTE compatible memrchr
Add support for MTE to memrchr. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Alex Butler [Tue, 9 Jun 2020 16:06:03 +0000 (16:06 +0000)]
aarch64: MTE compatible memchr
Add support for MTE to memchr. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
Alex Butler [Tue, 9 Jun 2020 15:57:03 +0000 (15:57 +0000)]
aarch64: MTE compatible strcpy
Add support for MTE to strcpy. Regression tested with xcheck and benchmarked
with glibc's benchtests on the Cortex-A53, Cortex-A72, and Neoverse N1.
The existing implementation assumes that any access to the pages in which the
string resides is safe. This assumption is not true when MTE is enabled. This
patch updates the algorithm to ensure that accesses remain within the bounds
of an MTE tag (16-byte chunks) and improves overall performance.
H.J. Lu [Wed, 17 Jun 2020 13:34:46 +0000 (06:34 -0700)]
x86: Update CPU feature detection [BZ #26149]
1. Divide architecture features into the usable features and the preferred
features. The usable features are for correctness and can be exported in
a stable ABI. The preferred features are for performance and only for
glibc internal use.
2. Change struct cpu_features to
struct cpu_features
{
struct cpu_features_basic basic;
unsigned int *usable_p;
struct cpuid_registers cpuid[COMMON_CPUID_INDEX_MAX];
unsigned int usable[USABLE_FEATURE_INDEX_MAX];
unsigned int preferred[PREFERRED_FEATURE_INDEX_MAX];
...
};
and initialize usable_p to pointer to the usable arary so that
can be exported via a stable ABI. The cpuid and usable arrays can be
expanded with backward binary compatibility for both .o and .so files.
3. Add COMMON_CPUID_INDEX_7_ECX_1 for AVX512_BF16.
4. Detect ENQCMD, PKS, AVX512_VP2INTERSECT, MD_CLEAR, SERIALIZE, HYBRID,
TSXLDTRK, L1D_FLUSH, CORE_CAPABILITIES and AVX512_BF16.
5. Rename CAPABILITIES to ARCH_CAPABILITIES.
6. Check if AVX512_VP2INTERSECT, AVX512_BF16 and PKU are usable.
7. Update CPU feature detection test.
Checked with a build for riscv64-linux-gnu-rv64imac-lp64 (no
builtin support), riscv64-linux-gnu-rv64imafdc-lp64, and
riscv64-linux-gnu-rv64imafdc-lp64d.
The powerpc sqrt implementation is also simplified:
- the static constants are open coded within the implementation.
- for !USE_SQRT_BUILTIN the function is implemented directly on
__ieee754_sqrt (it avoid an superflous extra jump).
Checked on powerpc-linux-gnu and powerpc64le-linux-gnu.
(all the issues wrong results for non default rounding modes).
The existing ia64 libm interface uses matherrf and matherrl in addition
to matherr for SVID error handling. However, there is no such error
handling support for exp10f in ia64 libm. So replacing it with the
generic implementation should be fine.
This patch changes the exp10f error handling semantics to only set
errno according to POSIX rules. New symbol version is introduced at
GLIBC_2.32. The old wrappers are kept for compat symbols.
There are some outliers that need special handling:
- ia64 provides an optimized implementation of exp10f that uses ia64
specific routines to set SVID compatibility. The new symbol version
is aliased to the exp10f one.
- m68k also provides an optimized implementation, and the new version
uses it instead of the sysdeps/ieee754/flt32 one.
- riscv and csky uses the generic template implementation that
does not provide SVID support. For both cases a new exp10f
version is not added, but rather the symbols version of the
generic sysdeps/ieee754/flt32 is adjusted instead.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu,
powerpc64le-linux-gnu.
Paul Zimmermann [Wed, 8 Apr 2020 20:32:28 +0000 (17:32 -0300)]
math: Optimized generic exp10f with wrappers
It is inspired by expf and reuses its tables and internal functions.
The error checks are inlined and errno setting is in separate tail
called functions, but the wrappers are kept in this patch to handle
the _LIB_VERSION==_SVID_ case.
Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.
strcmp-avx2.S: In avx2 strncmp function, strings are compared in
chunks of 4 vector size(i.e. 32x4=128 byte for avx2). After first 4
vector size comparison, code must check whether it already passed
the given offset. This patch implement avx2 offset check condition
for strncmp function, if both string compare same for first 4 vector
size.
Vineet Gupta [Fri, 8 Nov 2019 19:32:00 +0000 (11:32 -0800)]
ieee754/dbl-64: Reduce the scope of temporary storage variables
This came to light when adding hard-flaot support to ARC glibc port
without hardware sqrt support causing glibc build to fail:
| ../sysdeps/ieee754/dbl-64/e_sqrt.c: In function '__ieee754_sqrt':
| ../sysdeps/ieee754/dbl-64/e_sqrt.c:58:54: error: unused variable 'ty' [-Werror=unused-variable]
| double y, t, del, res, res1, hy, z, zz, p, hx, tx, ty, s;
The reason being EMULV() macro uses the hardware provided
__builtin_fma() variant, leaving temporary variables 'p, hx, tx, hy, ty'
unused hence compiler warning and ensuing error.
The intent of the patch was to fix that error, but EMULV is pervasive
and used fair bit indirectly via othe rmacros, hence this patch.
Functionally it should not result in code gen changes and if at all
those would be better since the scope of those temporaries is greatly
reduced now
Built tested with aarch64-linux-gnu arm-linux-gnueabi arm-linux-gnueabihf hppa-linux-gnu x86_64-linux-gnu arm-linux-gnueabihf riscv64-linux-gnu-rv64imac-lp64 riscv64-linux-gnu-rv64imafdc-lp64 powerpc-linux-gnu microblaze-linux-gnu nios2-linux-gnu hppa-linux-gnu
Also as suggested by Joseph [1] used --strip and compared the libs with
and w/o patch and they are byte-for-byte unchanged (with gcc 9).
| for i in `find . -name libm-2.31.9000.so`;
| do
| echo $i; diff $i /SCRATCH/vgupta/gnu2/install/glibcs/$i ; echo $?;
| done
Florian Weimer [Mon, 15 Jun 2020 07:50:14 +0000 (09:50 +0200)]
ld.so: Check for new cache format first and enhance corruption check
Now that ldconfig defaults to the new format (only), check for it
first. Also apply the corruption check added in commit 2954daf00bb4d
("Add more checks for valid ld.so.cache file (bug 18093)") to the
new-format-only case.
Samuel Thibault [Sun, 14 Jun 2020 17:44:57 +0000 (17:44 +0000)]
hurd: Fix __writev_nocancel_nostatus
* sysdeps/mach/hurd/Makefile [subdir=misc] (sysdep_routines): Add
writev_nocancel writev_nocancel_nostatus.
* sysdeps/mach/hurd/not-cancel.h (__writev_nocancel_nostatus): Replace
macro with function declaration (with hidden prototype in libc).
(__writev_nocancel): New function declaration (with hidden prototype in libc).
* sysdeps/mach/hurd/writev_nocancel_nostatus.c: New file.
* sysdeps/posix/writev_nocancel.c: New file, includes writev.c to make a
nocancel variant that calls __write_nocancel.
* sysdeps/posix/writev.c (writev): Do not define alias if __writev is
renamed.
Samuel Thibault [Sun, 14 Jun 2020 15:50:44 +0000 (15:50 +0000)]
hurd: Make write and pwrite64 cancellation points
and add _nocancel variants.
* sysdeps/mach/hurd/write.c (__libc_write): Call __write_nocancel
surrounded by enabling async cancel, to replace implementation moved
to...
* sysdeps/mach/hurd/write_nocancel.c (__write_nocancel): ... here.
* sysdeps/mach/hurd/pwrite64.c (__libc_pwrite64): Call
__pwrite64_nocancel surrounded by enabling async cancel, to replace
implementation moved to...
* sysdeps/mach/hurd/pwrite64_nocancel.c (__pwrite64_nocancel): ... here.
* sysdeps/mach/hurd/Makefile (sysdep_routines): Add write_nocancel and
pwrite64_nocancel.
* sysdeps/mach/hurd/not-cancel.h (__write_nocancel,
__pwrite64_nocancel): Replace macros with prototypes with a hidden proto on
libc.
* sysdeps/mach/hurd/dl-sysdep.c (__write_nocancel): New alias, check
that it is not hidden.
* sysdeps/mach/hurd/Versions (libc.GLIBC_PRIVATE): Add __write_nocancel.
(ld.GLIBC_PRIVATE): Add __write_nocancel.
* sysdeps/mach/hurd/i386/localplt.data (__write_nocancel): Add
reference.
Samuel Thibault [Sun, 14 Jun 2020 14:48:07 +0000 (14:48 +0000)]
htl: Fix cleanup support for IO locking
* sysdeps/htl/stdio-lock.h: New file, registers locking cleanup to htl.
* sysdeps/htl/libc-lockP.h: Include <libc-lock.h>.
(__libc_cleanup_region_start, __libc_cleanup_end,
__libc_cleanup_region_end): Override macros from <libc-lock.h> with
versions which register cleanup to htl.
(__pthread_get_cleanup_stack): Make reference weak for skipping
registration on in the static non-libpthread case.
Samuel Thibault [Sun, 14 Jun 2020 12:56:54 +0000 (12:56 +0000)]
htl: Move cleanup stack to variable shared between libc and pthread
If libpthread gets loaded dynamically, the stack needs to already contain the
cleanup handlers of the main thread.
* htl/libc_pthread_init.c (__pthread_cleanup_stack): New per-thread variable.
* htl/Versions (libc): Add __pthread_cleanup_stack as private symbol.
* htl/pt-internal.h (struct __pthread): Remove cancelation_handlers
field.
(__pthread_cleanup_stack): Add variable declaration.
* htl/pt-alloc.c (initialize_pthread): Remove initialization of
cancelation_handlers field.
* htl/pt-cleanup.c (__pthread_get_cleanup_stack): Return the address of
__pthread_cleanup_stack instead of that of the cancelation_handlers
field.
* htl/forward.c: Include <pt-internal.h>.
(dummy_list): Remove variable.
(__pthread_get_cleanup_stack): Return the address of __pthread_cleanup_stack
instead of that of dummy_list.
Samuel Thibault [Sun, 14 Jun 2020 00:19:35 +0000 (00:19 +0000)]
hurd: Make recv* cancellation points
* sysdeps/mach/hurd/recv.c (__recv): Make the __socket_recv call
cancellable.
* sysdeps/mach/hurd/recvfrom.c (__recvfrom): Make the __socket_recv and
__socket_whatis_address calls cancellable.
* sysdeps/mach/hurd/recvmsg.c (__libc_recvmsg): Make the __socket_recv,
__socket_whatis_address, __io_reauthenticate, and __auth_user_authenticate calls
cancellable.