H.J. Lu [Thu, 3 Dec 2020 23:02:44 +0000 (15:02 -0800)]
x86: Adjust tst-cpu-features-supports.c for GCC 11
Check HAS_CPU_FEATURE instead of CPU_FEATURE_USABLE for FSGSBASE, IBT,
LM, SHSTK and XSAVES since FSGSBASE requires kernel support, IBT/SHSTK/LM
require OS support and XSAVES is supervisor-mode only.
Lukasz Majewski [Tue, 1 Dec 2020 11:26:55 +0000 (12:26 +0100)]
lowlevellock-futex: Remove not used macros
Following macros: lll_futex_timed_lock_pi, lll_futex_clock_wait_bitset,
lll_futex_wait_requeue_pi, lll_futex_timed_wait_requeue_pi are not
used anymore so are eligible for removal.
Lukasz Majewski [Tue, 1 Dec 2020 10:25:11 +0000 (11:25 +0100)]
futex: Remove not used futex_reltimed_wait{_cancelable}
After gai_suspend and aio_suspend conversion to support 64 bit time and
hence rewriting the code to use only absolute variants of futex wait
functions (i.e. __futex_abstimed_wait64 and __futex_abstimed_wait_cancelable64)
futex_reltimed_wait{_cancelable} are not needed anymore and can be removed.
Lukasz Majewski [Mon, 30 Nov 2020 13:33:12 +0000 (14:33 +0100)]
y2038: Convert gai_suspend to support 64 bit time
This change uses (in gai_misc.h):
- __futex_abstimed_wait64 (instead of futex_reltimed_wait)
- __futex_abstimed_wait_cancellable64
(instead of futex_reltimed_wait_cancellable)
from ./sysdeps/nptl/futex-helpers.h
The gai_suspend() accepts relative timeout, which then is converted to
absolute one.
The i686-gnu port (HURD) do not define DONT_NEED_GAI_MISC_COND and as it
doesn't (yet) support 64 bit time it uses not converted
pthread_cond_timedwait().
The __gai_suspend() is supposed to be run on ports with __TIMESIZE !=64 and
__WORDSIZE==32. It internally utilizes __gai_suspend_time64() and hence the
conversion from 32 bit struct timespec to 64 bit one is required.
For ports supporting 64 bit time the __gai_suspend_time64() will be used
either via alias (to __gai_suspend when __TIMESIZE==64) or redirection
(when -D_TIME_BITS=64 is passed).
Lukasz Majewski [Mon, 30 Nov 2020 16:57:56 +0000 (17:57 +0100)]
symbols: Add defines for libanl's libanl_hidden_{def|proto}
The __gai_suspend_time64, which supports 64 bit time on ports with
__WORDSIZE == 32 && __TIMESIZE != 64, shall be exported from libanl
(the same library from which original gai_suspend is exported).
Up till now there were no defines for this library. This commit adds
them.
Florian Weimer [Fri, 4 Dec 2020 08:13:43 +0000 (09:13 +0100)]
elf: Add glibc-hwcaps subdirectory support to ld.so cache processing
This recognizes the DL_CACHE_HWCAP_EXTENSION flag in cache entries,
and picks the supported cache entry with the highest priority.
The elf/tst-glibc-hwcaps-prepend-cache test documents a non-desired
aspect of the current cache implementation: If the cache selects a DSO
that does not exist on disk, _dl_map_object falls back to open_path,
which may or may not find an alternative implementation. This is an
existing limitation that also applies to the legacy hwcaps processing
for ld.so.cache.
Florian Weimer [Fri, 4 Dec 2020 08:13:43 +0000 (09:13 +0100)]
elf: Process glibc-hwcaps subdirectories in ldconfig
Libraries from these subdirectories are added to the cache
with a special hwcap bit DL_CACHE_HWCAP_EXTENSION, so that
they are ignored by older dynamic loaders.
Florian Weimer [Fri, 4 Dec 2020 08:13:43 +0000 (09:13 +0100)]
elf: Implement tail merging of strings in ldconfig
This simplifies the string table construction in elf/cache.c
because there is no more need to keep track of offsets explicitly;
the string table implementation does this internally.
This change slightly reduces the size of the cache on disk. The
file format does not change as a result. The strings are
null-terminated, without explicit length, so tail merging is
transparent to readers.
Florian Weimer [Fri, 4 Dec 2020 08:13:43 +0000 (09:13 +0100)]
elf: Implement a string table for ldconfig, with tail merging
This will be used in ldconfig to reduce the ld.so.cache size slightly.
Tail merging is an optimization where a pointer points into another
string if the first string is a suffix of the second string.
The hash function FNV-1a was chosen because it is simple and achieves
good dispersion even for short strings (so that the hash table bucket
count can be a power of two). It is clearly superior to the hsearch
hash and the ELF hash in this regard.
The hash table uses chaining for collision resolution.
Florian Weimer [Fri, 4 Dec 2020 08:13:43 +0000 (09:13 +0100)]
elf: Add endianness markup to ld.so.cache (bug 27008)
Use a reserved byte in the new format cache header to indicate whether
the file is in little endian or big endian format. Eventually, this
information could be used to provide a unified cache for qemu-user
and similiar scenarios.
Florian Weimer [Fri, 4 Dec 2020 08:13:43 +0000 (09:13 +0100)]
elf: Add glibc-hwcaps support for LD_LIBRARY_PATH
This hacks non-power-set processing into _dl_important_hwcaps.
Once the legacy hwcaps handling goes away, the subdirectory
handling needs to be reworked, but it is premature to do this
while both approaches are still supported.
ld.so supports two new arguments, --glibc-hwcaps-prepend and
--glibc-hwcaps-mask. Each accepts a colon-separated list of
glibc-hwcaps subdirectory names. The prepend option adds additional
subdirectories that are searched first, in the specified order. The
mask option restricts the automatically selected subdirectories to
those listed in the option argument. For example, on systems where
/usr/lib64 is on the library search path,
--glibc-hwcaps-prepend=valgrind:debug causes the dynamic loader to
search the directories /usr/lib64/glibc-hwcaps/valgrind and
/usr/lib64/glibc-hwcaps/debug just before /usr/lib64 is searched.
Jakub Jelinek [Thu, 3 Dec 2020 12:33:44 +0000 (13:33 +0100)]
x86: Fix THREAD_SELF definition to avoid ld.so crash (bug 27004)
The previous definition of THREAD_SELF did not tell the compiler
that %fs (or %gs) usage is invalid for the !DL_LOOKUP_GSCOPE_LOCK
case in _dl_lookup_symbol_x. As a result, ld.so could try to use the
TCB before it was initialized.
As the comment in tls.h explains, asm volatile is undesirable here.
Using the __seg_fs (or __seg_gs) namespace does not interfere with
optimization, and expresses that THREAD_SELF is potentially trapping.
This reverts commit 81b83ff61f95f30ad53d6075247af0ea61a0b16e to move
__xmknod{at} back to default symbols. ABIs with default symbol version
of 2.33 or newer (such as riscv32) continue to just provide the mknod*
symbols.
The idea is to not force static libraries built against old glibc
to update against new glibcs (since they reference the the
xmknod{at} symbols).
Revert "linux: Move {f}xstat{at} to compat symbols"
This reverts commit 20b39d59467b0c1d858e89ded8b0cebe55e22f60 to move
{f}xstat{at} back to default symbols. ABIs with default symbol version
of 2.33 or newer (such as riscv32) continue to just provide the stat
symbols.
The idea is to not force static libraries built against old glibc
to update against new glibcs (since they reference the old
{f}xstat{at} symbols).
The earlier implementation of this, __lll_clocklock, calls lll_clockwait
that doesn't return the futex syscall error codes. It always tries again
if that fails.
However in the current implementation, when the futex returns EAGAIN,
__futex_clocklock64 will also return EGAIN, even if the futex is taken.
This patch fixes the EAGAIN issue and also adds a check for EINTR. As
futex syscall can return EINTR if the thread is interrupted by a signal.
In this case I'm assuming the function should continue trying to lock as
there is no mention to about it on POSIX. Also add a test for both
scenarios.
Paul E. Murphy [Tue, 7 Apr 2020 21:20:55 +0000 (16:20 -0500)]
powerpc64le: ifunc select *f128 routines in multiarch mode
Programatically generate simple wrappers for interesting libm *f128
objects. Selected functions are transcendental functions or
those with trivial compiler builtins. This can result in a 2-3x
speedup (e.g logf128 and expf128).
A second set of implementation files are generated which include
the first implementation encountered along the search path. This
usually works, except when a wrapper is overriden and makefile
search order slightly diverges from include order. Likewise,
wrapper object files are created for each generated file. These
hold the ifunc selection routines which export ABI.
Next, several shared headers are intercepted to control renaming of
asm function redirects are used first, and sometimes macro renames
if the former is impractical.
Notably, if the request machine supports hardware IEEE128 (i.e POWER9
and newer) this ifunc machinery is disabled. Likewise existing
ifunc support for float128 is consolidated into this (e.g sqrtf128
and fmaf128).
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Lukasz Majewski [Mon, 23 Nov 2020 20:47:20 +0000 (17:47 -0300)]
y2038: Convert aio_suspend to support 64 bit time
The aio_suspend function has been converted to support 64 bit time.
This change uses (in aio_misc.h):
- __futex_abstimed_wait64 (instead of futex_reltimed_wait)
- __futex_abstimed_wait_cancellable64
(instead of futex_reltimed_wait_cancellable)
from ./sysdeps/nptl/futex-helpers.h
The aio_suspend() accepts relative timeout, which then is converted to
absolute one.
The i686-gnu port (HURD) do not define DONT_NEED_AIO_MISC_COND and as it
doesn't (yet) support 64 bit time it uses not converted
pthread_cond_timedwait().
The __aio_suspend() is supposed to be run on ports with __TIMESIZE !=64 and
__WORDSIZE==32. It internally utilizes __aio_suspend_time64() and hence the
conversion from 32 bit struct timespec to 64 bit one is required.
For ports supporting 64 bit time the __aio_suspend_time64() will be used
either via alias (to __aio_suspend when __TIMESIZE==64) or redirection
(when -D_TIME_BITS=64 is passed).
Some futex-internal calls require additional check for EOVERFLOW (as
indicated by [1] [2] [3]). For both mutex and rwlock code, EOVERFLOW is
handle as ETIMEDOUT; since it indicate to the caller that the blocking
operation could not be issued.
For mutex it avoids a possible issue where PTHREAD_MUTEX_ROBUST_* might
assume EOVERFLOW indicate futex has succeed, and for PTHREAD_MUTEX_PP_*
it avoid a potential busy infinite loop. For rwlock and semaphores, it
also avoids potential busy infinite loops.
Checked on x86_64-linux-gnu and i686-linux-gnu, although EOVERFLOW
won't be possible with current usage (since all timeouts on 32-bit
architectures with 32-bit time_t support will be in the range of
32-bit time_t).
The 878fe624d4 changed lll_futex_timed_wait, which expects a relative
timeout, with a __futex_abstimed_wait64, which expects an absolute
timeout. However the code still passes a relative timeout.
Also, the PTHREAD_PRIO_PROTECT support for clocks different than
CLOCK_REALTIME was broken since the inclusion of
pthread_mutex_clocklock (9d20e22e46) since lll_futex_timed_wait
always use CLOCK_REALTIME.
This patch fixes by removing the relative time calculation. It
also adds some xtests that tests both thread and inter-process
usage.
Xiaoming Ni [Thu, 26 Nov 2020 16:35:10 +0000 (13:35 -0300)]
io: nftw/ftw: Fix stack overflow with large nopenfd [BZ #26353]
The nopenfd value is used as argument for the internal buffer on
ftw_statup, which is allocated with alloca and might trigger
a stack overflow for large values. This patch replaces the memory
allocation to use malloc instead.
nptl: Return EINVAL for pthread_mutex_clocklock/PI with CLOCK_MONOTONIC [BZ #26801]
Linux futex FUTEX_LOCK_PI operation only supports CLOCK_REALTIME,
so pthread_mutex_clocklock operation with priority aware mutexes
may fail depending of the input timeout.
Also, it is not possible to convert a CLOCK_MONOTONIC to a
CLOCK_REALTIME due the possible wall clock time change which might
invalid the requested timeout.
nptl: Replace __futex_clocklock_wait64 with __futex_abstimed_wait64
For non null timeouts, the __futex_clocklock_wait64 creates an a
relative timeout by subtracting the current time from the input
argument. The same behavior can be obtained with FUTEX_WAIT_BITSET
without the need to calculate the relative timeout. Besides consolidate
the code it also avoid the possible relative timeout issues [1].
The __futex_abstimed_wait64 needs also to return EINVAL syscall
errors.
It can be replaced with a __futex_abstimed_wait_cancelable64 call,
with the advantage that there is no need to further clock adjustments
to create a absolute timeout. It allows to remove the now ununsed
futex_timed_wait_cancel64 internal function.
The __futex_abstimed_wait usage was remove with 3102e28bd11 and the
__futex_abstimed_wait_cancelable by 323592fdc92 and b8d3e8fbaac.
The futex_lock_pi can be replaced by a futex_lock_pi64.
Matheus Castanho [Mon, 19 Oct 2020 14:06:56 +0000 (11:06 -0300)]
powerpc: Make PT_THREAD_POINTER available to assembly code
PT_THREAD_POINTER is currenty defined inside a #ifndef __ASSEMBLER__ block, but
its usage should not be limited to C code, as it can be useful when accessing
the TLS from assembly code as well.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Stefan Liebler [Mon, 23 Nov 2020 09:51:24 +0000 (10:51 +0100)]
Use libnss_files.so for tests posix/bug-ga2 and resolv/tst-leaks2 [BZ #26821]
The tests posix/bug-ga2-mem and resolv/mtrace-tst-leaks2 are failing on
fedora 33 as mtrace reports memory leaks.
The /etc/nsswitch.conf differs between
Fedora 32: hosts: files dns myhostname
Fedora 33: hosts: files resolve [!UNAVAIL=return] myhostname dns
Therefore /lib64/libnss_resolve.so.2 (from systemd) and the dependencies
libgcc_s.so.1 and libpthread.so.0 are loaded.
Usually all malloc'ed resources from getaddrinfo / gethostbyname are freed
and the libraries are dlclose'd in nss/nsswitch.c:libc_freeres_fn (free_mem).
Unfortunately, /lib64/libnss_resolve.so.2 is marked with DF_1_NODELETE.
As this library is not unmapped, you'll see "Memory not freed".
Therefore those tests are now only relying on libnss_files.so by making
them test-container tests and providing the required configuration files.
By moving the tests to tests-container, those are now running with
"make check". Therefore the mtrace part of the tests are also moved
from "make xcheck" to "make check".
bug-ga2.c is now using test-driver.c in order to support WAIT_FOR_DEBUGGER
environment variable.
Samuel Thibault [Mon, 23 Nov 2020 00:31:41 +0000 (00:31 +0000)]
hurd report-wait: Fix stpcpy usage
We shall not overflow the size of the description parameter. This makes
describe_number and describe_port behave like strpcpy (except for not filling
all the end of buffer with zeroes) and _S_msg_report_wait use series of
stpncpy-like call. If we were to overflow, we can now detect it and
return ENOMEM.
Samuel Thibault [Sun, 22 Nov 2020 23:15:36 +0000 (23:15 +0000)]
hurd: Fix strcpy calls
strcpy cannot be used with overlapping buffer, we have to use memmove
instead. strcpy also cannot be safely used when the destination buffer
is smaller that the source, we need to use strncpy to truncate the
source if needed.
Samuel Thibault [Fri, 13 Nov 2020 19:37:41 +0000 (19:37 +0000)]
Add {,sysdep-}ld-library-path make variable
On GNU/Hurd we not only need $(common-objpfx) in LD_LIBRARY_PATH when loading
dynamic objects, but also $(common-objpfx)/mach and $(common-objpfx)/hurd. This
adds an ld-library-path variable to be used as LD_LIBRARY_PATH basis in
Makefiles, and a sysdep-ld-library-path variable for sysdeps to add some
more paths, here mach/ and hurd/.
Florian Weimer [Mon, 16 Nov 2020 18:33:30 +0000 (19:33 +0100)]
nptl: Move stack list variables into _rtld_global
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.
Lukasz Majewski [Thu, 12 Nov 2020 11:24:04 +0000 (12:24 +0100)]
nanosleep: Pass NULL when rem == NULL on ports with __TIMESIZE != 64
On ports with __TIMESIZE != 64 the remaining time argument always receives
pointer to struct __timespec64 instance. This is the different behavior
when compared to 64 bit versions of clock_nanosleep and nanosleep
functions, which receive NULL.
To avoid any potential issues, we also pass NULL when *rem pointer is
NULL.
Reported-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Lukasz Majewski [Wed, 11 Nov 2020 23:24:48 +0000 (00:24 +0100)]
y2038: Convert thrd_sleep to support 64 bit time
The thrd_sleep function has been converted to support 64 bit time.
It was also necessary to provide Linux specific copy of it to avoid
problems on i686-gnu (i.e. HURD) port, which is not providing
clock_nanosleep() supporting 64 bit time.
The thrd_sleep is a wrapper on POSIX threads to provide C11 standard
threads interface. It directly calls __clock_nanosleep64().
Lukasz Majewski [Wed, 11 Nov 2020 23:09:03 +0000 (00:09 +0100)]
y2038: Convert mtx_timedlock to support 64 bit time
The mtx_timedlock function has been converted to support 64 bit time.
It was also necessary to provide Linux specific copy of it to avoid
problems on i686-gnu (i.e. HURD) port, which is not providing
pthread_mutex_timedlock() supporting 64 bit time.
The mtx_timedlock is a wrapper on POSIX threads to provide C11 standard
threads interface. It directly calls __pthread_mutex_timedlock64().
Lukasz Majewski [Thu, 29 Oct 2020 13:19:25 +0000 (14:19 +0100)]
y2038: Convert cnd_timedwait to support 64 bit time
The cnd_timedwait function has been converted to support 64 bit time.
It was also necessary to provide Linux specific copy of it to avoid
problems on i686-gnu (i.e. HURD) port, which is not providing
pthread_cond_timedwait() supporting 64 bit time.
Moreover, a linux specific copy of thrd_priv.h header file has been
added as well.
The cnd_timedwait is a wrapper on POSIX threads to provide C11 standard
threads interface. It directly calls __pthread_cond_timedwait64().
Samuel Thibault [Fri, 13 Nov 2020 15:56:51 +0000 (15:56 +0000)]
hurd: break relocation loop between libc.so and lib{mach,hurd}user.so
See
https://sourceware.org/pipermail/libc-alpha/2020-November/119575.html
lib{mach,hurd}user.so gets relocated before libc.so, but its references
to strpcpy and memcpy would need an ifunc decision, which e.g. on
x86 relies on cpu_features, but libc.so's _rtld_global_ro is not
relocated yet.
We can however just make lib{mach,hurd}user.so only call non-ifunc
functions, which can be relocated before libc.so is relocated.
Florian Weimer [Fri, 13 Nov 2020 14:19:41 +0000 (15:19 +0100)]
nptl: Eliminate <smp.h> and __is_smp
Most systems are SMP, so optimizing for the UP case is no longer
approriate. A dynamic check based on the kernel identification
has been only implemented for i386 anyway.
To disable adaptive mutexes on sh, define DEFAULT_ADAPTIVE_COUNT
as zero for this architecture.
Samuel Thibault [Fri, 13 Nov 2020 10:23:08 +0000 (10:23 +0000)]
hurd: Make sure signals get started
Now that _hurd_libc_proc_init is idempotent, we can always call it,
independently of the __libc_multiple_libcs test which may not match
whether signals should be started or not.
The builtin has been available in gcc since 4.7.0 and in clang since
2.6. This fixes stpncpy fortification with clang since it does a
better job of plugging in __stpncpy_chk in the right place than the
header hackery.
This has been tested by building and running all tests with gcc 10.2.1
and also with clang tip as of a few days ago (just the tests in debug/
since running all tests don't work with clang at the moment) to make
sure that both compilers pass the stpncpy tests.
Samuel Thibault [Wed, 11 Nov 2020 12:52:35 +0000 (12:52 +0000)]
hurd: Notify the proc server later during initialization
Notifying the proc server is an involved task, and unleashes various signal
handling etc. so we have to do this after e.g. ifunc relocations are
completed.
Florian Weimer [Wed, 11 Nov 2020 10:59:11 +0000 (11:59 +0100)]
struct _Unwind_Exception alignment should not depend on compiler flags
__attribute__((__aligned__)) selects an alignment that depends on
the micro-architecture selected by GCC flags. Enabling vector
extensions may increase the allignment. This is a problem when
building glibc as a collection of ELF multilibs with different
GCC flags because ld.so and libc.so/libpthread.so/&c may end up
with a different layout of struct pthread because of the
changing offset of its struct _Unwind_Exception field.
Samuel Thibault [Tue, 10 Nov 2020 23:35:19 +0000 (23:35 +0000)]
hurd: keep only required PLTs in ld.so
We need NO_RTLD_HIDDEN because of the need for PLT calls in ld.so.
See Roland's comment in
https://sourceware.org/bugzilla/show_bug.cgi?id=15605
"in the Hurd it's crucial that calls like __mmap be the libc ones
instead of the rtld-local ones after the bootstrap phase, when the
dynamic linker is being used for dlopen and the like."
We used to just avoid all hidden use in the rtld ; this commit switches to
keeping only those that should use PLT calls, i.e. essentially those defined in
sysdeps/mach/hurd/dl-sysdep.c:
Samuel Thibault [Tue, 10 Nov 2020 23:50:04 +0000 (23:50 +0000)]
hurd: Add missing startup calls
DL_SYSDEP_INIT and DL_PLATFORM_INIT were not getting called, leading to
missing x86 platform tuning, now mandatory with 0f09154c6400
("x86: Initialize CPU info via IFUNC relocation [BZ 26203]")
Zong Li [Thu, 29 Oct 2020 17:33:38 +0000 (01:33 +0800)]
riscv: Get cache information through sysconf
Add support to query cache information on RISC-V through sysconf()
function. The cache information had been added in AUX vector of RISC-V
architecture in Linux kernel v.5.10-rc1. Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
linux: Allow adjtime with NULL argument [BZ #26833]
The adjtime interface allows return the amount of time remaining
from any previous adjustment that has not yet been completed by
passing a NULL as first argument. This was introduced with y2038
support 0308077e3a.
Samuel Thibault [Tue, 26 May 2020 20:20:10 +0000 (22:20 +0200)]
Rearrange bsd_getpt vs bsd_openpt and implement posix_openpt on BSD
* sysdeps/unix/bsd/getpt.c (__getpt): Add oflag parameter, pass
it to the _open call and rename to...
(__bsd_openpt): ... new function.
(__getpt): Reimplement on top of __bsd_openpt.
(__posix_openpt): Replace stub with implementation on top of __bsd_openpt.
(posix_openpt): Remove stub warning.