Corinna Vinschen [Fri, 28 Feb 2020 11:39:41 +0000 (12:39 +0100)]
Cygwin: AF_UNIX: fix creating shared mem region in dup
reopen_shmem is accidentally called on the parent fhandler
rather than the child fhandler, and it's called too early.
Make sure to call it on the child and only after its shmem_handle
is valid.
Takashi Yano [Wed, 26 Feb 2020 15:33:01 +0000 (00:33 +0900)]
Cygwin: console: Add support for REP escape sequence to xterm mode.
- In Win10 upto 1809, xterm compatible mode does not have REP
escape sequence which terminfo declares. This patch adds support
for "CSI Ps b" (REP). With this patch, bvi (binary editor) works
normally in Win10 1809. Also, xterm compatible mode does not have
"CSI Pm `" (HPA), "CSI Pm a" (HPR) and "CSI Ps e" (VPR). However,
they do not appear to be declared by terminfo. Therefore, these
have been pending.
Takashi Yano [Wed, 26 Feb 2020 15:32:59 +0000 (00:32 +0900)]
Cygwin: console: Add workaround for broken IL/DL in xterm mode.
- Cygwin console with xterm compatible mode causes problem reported
in https://www.cygwin.com/ml/cygwin-patches/2020-q1/msg00212.html
if background/foreground colors are set to gray/black respectively
in Win10 1903/1909. This is caused by "CSI Ps L" (IL), "CSI Ps M"
(DL) and "ESC M" (RI) control sequences which are broken. This
patch adds a workaround for the issue.
Corinna Vinschen [Wed, 26 Feb 2020 20:08:51 +0000 (21:08 +0100)]
Cygwin: ps: fix compiler warning in ttynam
The helper function ttynam creates a tty name by using sprintf wrongly
on a pretty short buffer. The foramt string only specifies a minimum
field length, not a maximum field length, so gcc-9.2.0 complains:
ps.cc:101:23: warning: 'sprintf' may write a terminating nul past the
end of the destination [-Wformat-overflow=]
Fix this thoroughly by specifying a maximum field width as well as by
using snprintf with a fixed buffer length. Also, drop using a static
buffer in favor of using a buffer in the caller.
Corinna Vinschen [Wed, 26 Feb 2020 19:52:55 +0000 (20:52 +0100)]
Cygwin: cygserver: drop useless packed attribute
...from structs used for data exchange between clients and cygserver.
All of the structs have the same size and member offsets, packed or
unpacked. Keeping the packed attribute results in ominous warnings
from gcc-9.2.0:
cygserver.cc:259:10: warning: taking address of packed member of
'client_request_attach_tty::request_attach_tty' may result in an
unaligned pointer value [-Waddress-of-packed-member]
Corinna Vinschen [Wed, 26 Feb 2020 15:50:34 +0000 (16:50 +0100)]
Cygwin: posix timers: fix uninitialized variable
The variable returning the overrun count from the tracker object after
disarming the overrun counter was not correctly initialized. For some
reason this has only been noticed by gcc-9.2.0, not by the formerly used
gcc-7.4.0.
This problem should not have had any runtime impact. The method
timer_tracker::disarm_overrun_event is supposed to be called in
lock-step with timer_tracker::arm_overrun_event, which in turn
results in the variable getting a valid value.
linux 4.6 x86/cpu: Add advanced power management bits
Bit 11 of CPUID 8000_0007 edx is processor feedback interface.
Bit 12 of CPUID 8000_0007 edx is accumulated power.
Print proper names in /proc/cpuinfo
[missed enabling this 2016 change during previous major cpuinfo update
as no power related changes were made to the Linux files since then]
Joel Sherrill [Tue, 25 Feb 2020 13:38:33 +0000 (07:38 -0600)]
x86_64/i386 fenv: Replace symlink with include fenv_stub.c
Having symlinks for these files led to an issue reported to the RTEMS
Project that showed up using some tar for native Windows to unpack the
newlib sources. It creates symlinks in the tar file as copies of the
files the symlinks point to. If the links appear in the tar file before
the source exists, it cannot copy the file.
The solution in this patch is to convert the files that are symbolic
links into simple files which include the file they were linked to.
This should be more portable and avoids the symbolinc link problem.
Takashi Yano [Mon, 24 Feb 2020 16:12:16 +0000 (01:12 +0900)]
Cygwin: console: Fix segfault on shared_console_info access.
- Accessing shared_console_info before initialization causes access
violation because it is a NULL pointer. The cause of the problem
reported in https://cygwin.com/ml/cygwin/2020-02/msg00197.html is
this NULL pointer access in request_xterm_mode_output() when it is
called from close(). This patch makes sure that shared_console_info
is not NULL before calling request_xterm_mode_output().
Brian Inglis [Fri, 21 Feb 2020 21:28:08 +0000 (14:28 -0700)]
fhandler_proc/cpuinfo: support fast short REP MOVSB
Added in Linux 5.6:
Check FSRM and use REP MOVSB for short copies on systems that have it.
>From the Intel Optimization Reference Manual:
3.7.6.1 Fast Short REP MOVSB
Beginning with processors based on Ice Lake Client microarchitecture,
REP MOVSB performance is enhanced with string lengths up to 128 bytes.
Support for fast-short REP MOVSB is indicated by the CPUID feature flag:
CPUID [EAX=7H, ECX=0H).EDX.FAST_SHORT_REP_MOVSB[bit 4] = 1.
There is no change in the REP STOS performance.
Corinna Vinschen [Thu, 20 Feb 2020 13:48:03 +0000 (14:48 +0100)]
Cygwin: console: ignore NUL byte on write in xterm emulation mode as well
A NUL byte in the output stream got accidentally not handled as IGN char
in xterm console mode. The internal mbtowc conversion doesn't handle
embedded NUL values gracefully, it always stops converting at NUL bytes.
This broke the output of strings with embedded NUL bytes.
Fix this by always skipping IGN chars in the "normal char output loop"
and make sure not to move the cursor one position to the right, as in
legacy console mode.
Thomas Wolff [Sun, 16 Feb 2020 23:00:00 +0000 (00:00 +0100)]
Locale modifier "@cjksingle" to enforce single-width CJK width.
This option follows a proposal in the Terminals Working Group Specifications
(https://gitlab.freedesktop.org/terminal-wg/specifications/issues/9#note_406682).
It makes locale width consistent with the corresponding mintty feature.
Takashi Yano [Mon, 17 Feb 2020 10:29:07 +0000 (19:29 +0900)]
Cygwin: console: Change timing of set/unset xterm compatible mode.
- If two cygwin programs are executed simultaneousley with pipes
in cmd.exe, xterm compatible mode is accidentally disabled by
the process which ends first. After that, escape sequences are
not handled correctly in the other app. This is the problem 2
reported in https://cygwin.com/ml/cygwin/2020-02/msg00116.html.
This patch fixes the issue. This patch also fixes the problem 3.
For these issues, the timing of setting and unsetting xterm
compatible mode is changed. For read, xterm compatible mode is
enabled only within read() or select() functions. For write, it
is enabled every time write() is called, and restored on close().
Nicolas Brunie [Fri, 14 Feb 2020 09:12:25 +0000 (10:12 +0100)]
pow: fix pow(-1.0, NaN)
I think I may have encountered a bug in the implementation of pow:
pow(-1.0, NaN) returns 1.0 when it should return NaN.
Because ix is used to check input vs 1.0 rather than hx, -1.0 is
mistaken for 1.0
Takashi Yano [Mon, 10 Feb 2020 11:42:45 +0000 (20:42 +0900)]
Cygwin: pty: Prevent potential errno overwriting.
- In push_to_pcon_screenbuffer(), open() and ioctl() are called.
Since push_to_pcon_screenbuffer() is called in read() and write(),
errno which is set in read() and write() code may be overwritten
in open() or ioctl() call. This patch prevent this situation.
Takashi Yano [Sun, 9 Feb 2020 14:47:30 +0000 (23:47 +0900)]
Cygwin: pty: Fix state mismatch caused in mintty.
- PTY has a bug reported in:
https://cygwin.com/ml/cygwin/2020-02/msg00067.html.
This is the result of state mismatch between real pseudo console
attaching state and state variable. This patch fixes the issue.
Takashi Yano [Sun, 9 Feb 2020 14:46:59 +0000 (23:46 +0900)]
Cygwin: pty: Inherit typeahead data between two input pipes.
- PTY has a problem that the key input, which is typed during
windows native app is running, disappear when it returns to shell.
(Problem 3 in https://cygwin.com/ml/cygwin/2020-02/msg00007.html)
This is beacuse pty has two input pipes, one is for cygwin apps
and the other one is for native windows apps. The key input during
windows native program is running is sent to the second input pipe
while cygwin shell reads input from the first input pipe.
This patch realize transfering input data between these two pipes.
Takashi Yano [Sun, 9 Feb 2020 14:46:02 +0000 (23:46 +0900)]
Cygwin: pty: Remove debug codes and organize related codes.
- Debug codes used in the early stage of pseudo console support are
removed. (Regarding ALWAYS_USE_PCON and USE_API_HOOK) Along with
this, the codes related to this change are organized.
Takashi Yano [Thu, 6 Feb 2020 10:48:17 +0000 (19:48 +0900)]
Cygwin: pty: Use pinfo() rather than kill() with signal 0.
- PTY code has a problem that tcsh is terminated if the following
command is executed.
true; chcp &
This seems to be caused by invalid pointer access which occurs
when the process exits during the kill() code is execuetd. This
patch avoids the issue by not using kill().
libgloss: Fix lseek semihosting bug on nios2 and m68k
When off_t is 32 bits, the value needs to be sign-extended to 64 bits
before shifting right to extract the high-order word. Previously
negative offsets were incorrectly encoded.
Takashi Yano [Sat, 1 Feb 2020 04:28:39 +0000 (13:28 +0900)]
Cygwin: console: Revise color setting codes in legacy console mode.
- With this patch, foreground color and background color are allowed
to be set simultaneously by 24 bit color escape sequence such as
ESC[38;2;0;0;255;48;2;128;128;0m in legacy console mode.
Ken Brown [Thu, 30 Jan 2020 15:08:21 +0000 (10:08 -0500)]
Cygwin: fstat_helper: always use handle in call to get_file_attribute
When fhandler_base::fstat_helper is called, the handle h returned by
get_stat_handle() should be pc.handle() and should be safe to use for
getting the file information. Previously, the call to
get_file_attribute() for FIFOs set the first argument to NULL instead
of h, thereby forcing the file to be opened for fetching the security
descriptor in get_file_sd().
Jim Wilson [Wed, 29 Jan 2020 22:46:17 +0000 (14:46 -0800)]
RISC-V: Use newlib nano specific libm.
The libm gamma functions use the _gamma_signgam field of the reentrant
structure, which changes offset with the --enable-newlib-reent-small
configure option, which means we need to use a newlib nano specific
version of libm in addition to libc in the nano.specs file. Reported
by Keith Packard. There is a riscv-gnu-toolchain patch that goes
along with this to create the new libm_nano.a file.
Ken Brown [Sat, 25 Jan 2020 18:08:00 +0000 (13:08 -0500)]
Cygwin: AF_LOCAL: fix fcntl and dup if O_PATH is set
Make fhandler_socket_local::dup and fhandler_socket_local::fcntl (a
new method) call fhandler_base::dup and fhandler_base::fcntl if O_PATH
is set.
We're viewing the socket as a disk file here, but there's no need to
implement the actions of fhandler_disk_file::dup and
fhandler_disk_file::fcntl, which do nothing useful in this case beyond
what the fhandler_base methods do. (The extra actions are only useful
when I/O is going to be done on the file.)
Ken Brown [Sat, 25 Jan 2020 12:45:10 +0000 (07:45 -0500)]
Cygwin: AF_LOCAL::fstatvfs: use our handle if O_PATH is set
If O_PATH is set, then the fhandler_socket_local object has a handle
that can be used for getting the statvfs information. Use it by
calling fhandler_base::fstatvfs_by_handle. Without this change,
fhandler_disk_file::fstatfvs would be called on a new fhandler_disk
object, which would then have to be opened.
Ken Brown [Thu, 23 Jan 2020 20:11:15 +0000 (15:11 -0500)]
Cygwin: AF_LOCAL: set appropriate errno on system calls
If an AF_LOCAL socket is opened with O_PATH, all socket system calls
that take a file descriptor argument fail on the resulting descriptor.
Make sure that errno is set as on Linux for those calls that are
implemented on Linux. In almost all cases it is ENOTSOCK. There are
two exceptions:
- sockatatmark(3); errno is EBADF.
- bindresvport(3); errno is EAFNOSUPPORT if the second argument sin
(of type struct sockaddr_in *) is non-NULL and satisfies
sin->sin_family == AF_INET.
Finally, there are two BSD socket system calls implemented on Cygwin
but not Linux: getpeereid(3) and bindresvport_sa(3). Set errno to
ENOTSOCK for these for consistency with the majority of the other
calls.
Ken Brown [Thu, 23 Jan 2020 19:39:15 +0000 (14:39 -0500)]
Cygwin: AF_LOCAL: allow opening with the O_PATH flag
If that flag is not set, or if an attempt is made to open a different
type of socket, the errno is now EOPNOTSUPP instead of ENXIO. This is
consistent with POSIX, starting with the 2016 edition. Earlier
editions were silent on this issue.
Opening is done in a (new) fhandler_socket_local::open method by
calling fhandler_base::open_fs.
Also add a corresponding fhandler_socket_local::close method.
This breaks gnulib's autoconf test for POSIX compatibility of
fflush/fseek. After fflush/fseek, ftello and lseek are out of
sync, with lseek having the wrong offset. This breaks backward
compatibility with Cygwin applications.
Ken Brown [Fri, 24 Jan 2020 20:09:03 +0000 (15:09 -0500)]
Cygwin: FIFO: fstatvfs: use our handle if O_PATH is set
If O_PATH is set, then the fhandler_fifo object has a handle that can
be used for getting the statvfs information. Use it by calling
fhandler_base::fstatvfs_by_handle. Before this change,
fhandler_disk_file::fstatfvs was called on a new fhandler_disk_file
object, which would then have to be opened.
Ken Brown [Fri, 24 Jan 2020 21:02:57 +0000 (16:02 -0500)]
Cygwin: fhandler_disk_file::fstatvfs: refactor
Define a new method fhandler_base::fstatvfs_by_handle, extracted from
fhandler_disk_file::fstatvfs, which gets the statvfs information when
a handle is available.
This will be used in future commits for special files that have been
opened with O_PATH.
Ken Brown [Fri, 24 Jan 2020 19:54:47 +0000 (14:54 -0500)]
Cygwin: fhandler_base::fstat_fs: accomodate the O_PATH flag
Treat a special file opened with O_PATH the same as a regular file,
i.e., use its handle to get the stat information.
Before this change, fstat_fs opened the file a second time, with the
wrong flags and without closing the existing handle. A side effect
was to change the openflags of the file, possibly causing further
system calls to fail.
Currently this change only affects FIFOs, but it will affect
AF_LOCAL/AF_UNIX sockets too once they support O_PATH.
Corinna Vinschen [Tue, 28 Jan 2020 16:57:50 +0000 (17:57 +0100)]
Cygwin: symlink/mknod: fix ACL handling
mknod32 actually creates a path_conv, just to call mknod_worker
with a win32 path. This doesn't only require to create path_conv
twice, it also breaks permissions on filesystems supporting ACLs.
Fix this by passing the path_conv created in the caller down to
symlink_worker. Also, while at it, simplify the handling of trailing
slashes and move it out of symlink_worker. Especially use the
new PC_SYM_NOFOLLOW_DIR flag to avoid fiddeling with creating
a new path copy without the trailing slash.
Corinna Vinschen [Tue, 28 Jan 2020 16:40:40 +0000 (17:40 +0100)]
Cygwin: path_conv: add PC_SYM_NOFOLLOW_DIR flag
Usually a trailing slash requires to follow an existing symlink,
even with PC_SYM_NOFOLLOW. The reason is that "foo/" is equivalent
to "foo/." so the symlink is in fact not the last path component,
"." is. This is default for almost all scenarios.
PC_SYM_NOFOLLOW_DIR now allows the caller to request not to
follow the symlink even if a trailing slash is given. This can
be used in callers to perform certain functions Linux-compatible.
Takashi Yano [Mon, 27 Jan 2020 11:22:24 +0000 (20:22 +0900)]
Cygwin: pty: Revise code waiting for forwarding again.
- After commit 6cc299f0e20e4b76f7dbab5ea8c296ffa4859b62, outputs of
cygwin programs which call both printf() and WriteConsole() are
frequently distorted. This patch fixes the issue.
Takashi Yano [Mon, 27 Jan 2020 12:14:32 +0000 (21:14 +0900)]
Cygwin: console: Share readahead buffer within the same process.
- The cause of the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00220.html is that the
chars input before dup() cannot be read from the new file descriptor.
This is because the readahead buffer (rabuf) in the console is newly
created by dup(), and does not inherit from the parent. This patch
fixes the issue.
Ken Brown [Thu, 23 Jan 2020 16:31:04 +0000 (16:31 +0000)]
Cygwin: re-implement fhandler_fifo::open with O_PATH
If the O_PATH flag is set, fhandler_fifo::open now simply calls
fhandler_base::open_fs.
The previous attempt to handle O_PATH in commit aa55d22c, "Cygwin:
honor the O_PATH flag when opening a FIFO", fixed a hang but otherwise
didn't do anything useful.
Ken Brown [Thu, 23 Jan 2020 16:31:04 +0000 (16:31 +0000)]
Cygwin: device_access_denied: return false if O_PATH is set
If O_PATH is set in the flags argument of
fhandler_base::device_access_denied, return false. No
read/write/execute access should be required in this case.
Previously, the call to device_access_denied in open(2) would lead to
an attempt to open the file with read access even if the O_PATH flag
was set.
Brian Inglis [Thu, 23 Jan 2020 09:06:27 +0000 (02:06 -0700)]
fhandler_proc.cc:format_proc_cpuinfo add rdpru flag
rdpru flag is cpuid xfn 80000008 ebx bit 4 added in linux 5.5;
see AMD64 Architecture Programmer's Manual Volume 3:
General-Purpose and System Instructions
https://www.amd.com/system/files/TechDocs/24594.pdf#page=329
and elsewhere in that document
Takashi Yano [Thu, 23 Jan 2020 11:34:25 +0000 (20:34 +0900)]
Cygwin: pty: Remove close() call just before reopening slave.
- After commit da4ee7d60b9ff0bcdc081609a4467adb428d58e6, the issue
reported in https://www.cygwin.com/ml/cygwin/2020-01/msg00209.html
occurs. This patch fixes the issue.
Takashi Yano [Tue, 21 Jan 2020 13:25:13 +0000 (22:25 +0900)]
Cygwin: pty: Introduce disable_pcon in environment CYGWIN.
- For programs which does not work properly with pseudo console,
disable_pcon in environment CYGWIN is introduced. If disable_pcon
is set, pseudo console support is disabled.
Takashi Yano [Tue, 21 Jan 2020 14:41:44 +0000 (23:41 +0900)]
Cygwin: pty: Fix reopening slave in push_to_pcon_screenbuffer().
- For programs compiled with -mwindows option, reopening slave is
needed in push_to_pcon_screenbuffer(), however, it was not at
appropriate place. This causes the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00161.html. This
patch fixes the issue.
Jeff Johnston [Tue, 21 Jan 2020 20:12:34 +0000 (15:12 -0500)]
Change the reent verify check option to document disabling it
- also change the handling of default_newlib_reent_check_verify to
be the same as other default variables in configure.host
- regenerate newlib/configure
Takashi Yano [Tue, 21 Jan 2020 02:22:02 +0000 (11:22 +0900)]
Cygwin: pty: Revise code waiting for forwarding by master_fwd_thread.
- Though this rarely happens, sometimes the first printing of non-
cygwin process does not displayed correctly. To fix this issue,
the code for waiting for forwarding by master_fwd_thread is revised.
Keith Packard [Tue, 21 Jan 2020 06:46:36 +0000 (22:46 -0800)]
riscv: Map between ieeefp.h exception bits and RISC-V FCSR bits
If we had architecture-specific exception bits, we could just set them
to match the processor, but instead ieeefp.h is shared by all targets
so we need to map between the public values and the register contents.
Keith Packard [Tue, 21 Jan 2020 06:46:35 +0000 (22:46 -0800)]
riscv: Add 'break' statements to fpsetround switch
This makes the fpsetround function actually do something rather than
just return -1 due to the default 'fall-through' behavior of the switch
statement.
Ken Brown [Fri, 27 Dec 2019 22:38:32 +0000 (17:38 -0500)]
Cygwin: fstatat, fchownat: support the AT_EMPTY_PATH flag
Following Linux, allow the pathname argument to be an empty string if
the AT_EMPTY_PATH flag is specified. In this case the dirfd argument
can refer to any type of file, not just a directory, and the call
operates on that file. In particular, dirfd can refer to a symlink
that was opened with O_PATH | O_NOFOLLOW.
Ken Brown [Fri, 27 Dec 2019 22:17:35 +0000 (17:17 -0500)]
Cygwin: readlinkat: allow pathname to be empty
Following Linux, allow the pathname argument to be an empty string,
provided the dirfd argument refers to a symlink opened with
O_PATH | O_NOFOLLOW. The readlinkat call then operates on that
symlink.
Ken Brown [Wed, 15 Jan 2020 15:49:21 +0000 (10:49 -0500)]
Cygwin: normalize_win32_path: allow drive without trailing backslash
Commit 283cb372, "Cygwin: normalize_win32_path: improve error
checking", required a prefix '\\?\' or '\??\' in the source path to be
followed by 'UNC\' or 'X:\', where X is a drive letter. That was too
restrictive, since it disallowed the paths '\\?\X: and '\??\X:'. This
caused problems when a user tried to use the root of a drive as the
Cygwin installation root, as reported here:
Takashi Yano [Thu, 16 Jan 2020 11:04:47 +0000 (20:04 +0900)]
Cygwin: pty: Fix state mismatch caused in octave gui.
- In octave gui, sometimes state mismatch between real pty state
and state variable occurs. For example, this occurs when 'ls'
command is executed in octave gui. This patch fixes the issue.
Takashi Yano [Fri, 10 Jan 2020 11:46:26 +0000 (20:46 +0900)]
Cygwin: pty: Disable FreeConsole() on close for non cygwin process.
- After commit e1a0775dc0545b5f9c81b09a327fc110c538b7b4, the problem
reported in https://www.cygwin.com/ml/cygwin/2020-01/msg00093.html
occurs. For Gnu scren and tmux, calling FreeConsole() on pty close
is necessary. However, if FreeConsole() is called, cygwin setup
with '-h' option does not work. Therefore, the commit e1a0775dc0545b5f9c81b09a327fc110c538b7b4 delayed closing pty.
This is the cause of the problem above. Now, instead of delaying
pty close, FreeConsole() is not called if the process is non cygwin
processes such as cygwin setup.
Takashi Yano [Thu, 2 Jan 2020 13:17:16 +0000 (22:17 +0900)]
Cygwin: console: Add code to restore console mode on close.
- The console with 24bit color support has a problem that console
mode is changed if cygwin process is executed in cmd.exe which
started in cygwin shell. For example, cursor keys become not
working if bash -> cmd -> true are executed in this order.
This patch fixes the issue.
Takashi Yano [Tue, 14 Jan 2020 01:53:59 +0000 (10:53 +0900)]
Cygwin: console: Add workaround for broken CSI3J in Win10 1809.
- In Win10 1809, the cursor position sometimes goes out of screen
by clear command in console. This seems to be caused by escape
sequence CSI3J (ESC[3J). This happens only for 1809. This patch
is a workaround for the issue.
Takashi Yano [Tue, 14 Jan 2020 02:09:42 +0000 (11:09 +0900)]
Cygwin: console: Disable xterm mode for non cygwin process only.
- Special function keys such as arrow keys or function keys do not
work in ConEmu with cygwin-connector after commit 6a06c6bc8f8492ea09aa3ae180fe94e4ac265611. This patch fixes the
issue.
Takashi Yano [Tue, 14 Jan 2020 02:50:04 +0000 (11:50 +0900)]
Cygwin: pty: Add missing CloseHandle() calls.
- PTY code which support pseudo console has a problem that causes
handle leaks. Four of these are bug in pty code, and the other
one seems to be a bug of Windows10. ClosePseudoConsole() fails
to close one internal handle. This patch fixes the issue.
Takashi Yano [Tue, 14 Jan 2020 04:10:54 +0000 (13:10 +0900)]
Cygwin: pty: Fix the issue regarding open and close multiple PTYs.
- If two PTYs are opened in the same process and the first one
is closed, the helper process for the first PTY remains running.
This patch fixes the issue.
Takashi Yano [Mon, 6 Jan 2020 14:38:34 +0000 (23:38 +0900)]
Cygwin: select: Speed up select() call for pty, pipe and fifo.
- The slowing down issue of X11 forwarding using ssh -Y, reported
in https://www.cygwin.com/ml/cygwin/2019-12/msg00295.html,
is due to the change of select() code for pty in the commit 915fcd0ae8d83546ce135131cd25bf6795d97966. cygthread::detach()
takes at most about 10msec because Sleep() is used in the thread.
For this issue, this patch uses cygwait() instead of Sleep() and
introduces an event to abort the wait. For not only pty, but pipe
and fifo also have the same problem potentially, so this patch
applies same strategy to them as well.
Takashi Yano [Sun, 5 Jan 2020 13:25:55 +0000 (22:25 +0900)]
Cygwin: console: Make suspending process work properly.
- After commit f4b47827cf87f055687a0c52a3485d42b3e2b941, suspending
process by Ctrl-Z does not work in console and results in hang up.
This patch fixes the issue.
git://sourceware.org / newlib-cygwin.git / log