Wilco Dijkstra [Thu, 23 Aug 2018 11:38:16 +0000 (12:38 +0100)]
Speedup tanf range reduction
Speedup tanf range reduction by using the new sincosf range
reduction algorithm. Overall code quality is improved due to
inlining, so there is a speedup even if no range reduction is
required.
Paul Eggert [Thu, 23 Aug 2018 00:46:32 +0000 (17:46 -0700)]
regex: port Gnulib code to z/OS POSIX environment
Problem reported by Arnold Robbins in:
https://lists.gnu.org/r/bug-gnulib/2018-08/msg00129.html
* posix/regex_internal.h (__iswalnum, __towlower, __towupper) [!_LIBC]:
Undef.
Joseph Myers [Wed, 22 Aug 2018 15:22:06 +0000 (15:22 +0000)]
Don't redefine ROUNDING_TESTS_* in math/test-*-vlen*.h.
This patch completes the move of ROUNDING_TESTS_* macros to typo-proof
conventions by stopping redefining them in test-*-vlen*.h. Instead,
libm-test-driver.c is made to check TEST_MATHVEC when setting
non-to-nearest rounding modes.
Tested for x86_64.
* math/test-double-vlen2.h: Don't include <math-tests-rounding.h>.
(ROUNDING_TESTS_double): Remove.
* math/test-double-vlen4.h: Don't include <math-tests-rounding.h>.
(ROUNDING_TESTS_double): Remove.
* math/test-double-vlen8.h: Don't include <math-tests-rounding.h>.
(ROUNDING_TESTS_double): Remove.
* math/test-float-vlen16.h: Don't include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Remove.
* math/test-float-vlen4.h: Don't include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Remove.
* math/test-float-vlen8.h: Don't include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Remove.
* math/libm-test-driver.c (IF_ROUND_INIT_FE_DOWNWARD): Check
!TEST_MATHVEC here.
(IF_ROUND_INIT_FE_TOWARDZERO): Likewise.
(IF_ROUND_INIT_FE_UPWARD): Likewise.
Joseph Myers [Wed, 22 Aug 2018 12:25:50 +0000 (12:25 +0000)]
Move ROUNDING_TESTS_* out of math-tests.h.
Continuing moving macros out of math-tests.h to smaller headers
following typo-proof conventions instead of using #ifndef, this patch
moves the ROUNDING_TESTS_* macros for individual types out to their
own sysdeps header.
In the soft-float case where FE_TONEAREST is the only rounding mode
macro defined, there is no need to define ROUNDING_TESTS_*; it is only
necessary when rounding modes macros are defined that may not be
supported at runtime. Thus, the ROUNDING_TESTS_* definitions for some
configurations are just removed, not moved to new
math-tests-rounding.h headers; the only architectures needing
math-tests-rounding.h are those where the macros are defined in
bits/fenv.h because of the possibility of a soft-float compilation
using a hard-float glibc with the same ABI (i.e., ARM and RISC-V).
The test-*-vlen*.h headers, by using #undef, do not yet follow
typo-proof conventions (but they no longer implicitly rely on being
included before math-tests.h, and this area can always be cleaned up
further in future).
Tested with build-many-glibcs.py.
* sysdeps/generic/math-tests-rounding.h: New file.
* sysdeps/generic/math-tests.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Do not define here.
(ROUNDING_TESTS_double): Likewise.
(ROUNDING_TESTS_long_double): Likewise.
(ROUNDING_TESTS_float128): Likewise.
* math/test-double-vlen2.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_double): Undefine before defining.
* math/test-double-vlen4.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_double): Undefine before defining.
* math/test-double-vlen8.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_double): Undefine before defining.
* math/test-float-vlen16.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Undefine before defining.
* math/test-float-vlen4.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Undefine before defining.
* math/test-float-vlen8.h: Include <math-tests-rounding.h>.
(ROUNDING_TESTS_float): Undefine before defining.
* sysdeps/arm/nofpu/math-tests-rounding.h: New file.
* sysdeps/arm/math-tests.h [__SOFTFP__] (ROUNDING_TESTS_float): Do
not define here.
[__SOFTFP__] (ROUNDING_TESTS_double): Likewise.
[__SOFTFP__] (ROUNDING_TESTS_long_double): Likewise.
* sysdeps/riscv/nofpu/math-tests-rounding.h: New file.
* sysdeps/riscv/math-tests.h [!__riscv_flen]
(ROUNDING_TESTS_float): Do not define here.
[!__riscv_flen] (ROUNDING_TESTS_double): Likewise.
[!__risv_flen] (ROUNDING_TESTS_long_double): Likewise.
* sysdeps/m68k/coldfire/math-tests.h [!__mcffpu__]
(ROUNDING_TESTS_float): Likewise.
[!__mcffpu__] (ROUNDING_TESTS_double): Likewise.
[!__mcffpu__] (ROUNDING_TESTS_long_double): Likewise.
* sysdeps/mips/math-tests.h [__mips_soft_float]
(ROUNDING_TESTS_float): Likewise.
[__mips_soft_float] (ROUNDING_TESTS_double): Likewise.
[__mips_soft_float] (ROUNDING_TESTS_long_double): Likewise.
* sysdeps/nios2/math-tests.h (ROUNDING_TESTS_float): Likewise.
(ROUNDING_TESTS_double): Likewise.
(ROUNDING_TESTS_long_double): Likewise.
Joseph Myers [Tue, 21 Aug 2018 15:57:22 +0000 (15:57 +0000)]
Update netinet/tcp.h from Linux 4.18.
This patch adds constants from netinet/tcp.h in Linux 4.18, and an
associated struct tcp_zerocopy_receive, to sysdeps/gnu/netinet/tcp.h.
The new TCP_REPAIR_* constants seemed sufficiently related to those
already present to include them.
Note that this patch does not include additions to struct tcp_info;
there are many other elements in this structure in the Linux kernel
that are not included in the glibc version (which was last extended in
2007, it seems). Such additions to the end of the structure may be OK
with the expected way it is used (size passed explicitly to the kernel
with getsockopt), but in principle any change to the size of a type
provided by glibc is an ABI change for external applications /
libraries using that type in their ABIs, and has the associated risks
of such a change.
Tested for x86_64.
* sysdeps/gnu/netinet/tcp.h (TCP_ZEROCOPY_RECEIVE): New macro.
(TCP_INQ): Likewise.
(TCP_CM_INQ): Likewise.
(TCP_REPAIR_ON): Likewise.
(TCP_REPAIR_OFF): Likewise.
(TCP_REPAIR_OFF_NO_WP): Likewise.
(struct tcp_zerocopy_receive): New type.
Joseph Myers [Mon, 20 Aug 2018 15:48:16 +0000 (15:48 +0000)]
Update struct signalfd_siginfo from Linux 4.18.
This patch updates struct signalfd_siginfo in sys/signalfd.h with new
members from Linux 4.18 (plus ssi_addr_lsb, added to the kernel in
2.6.37 without being added to sys/signalfd.h at that time). The
__pad2 member name follows the kernel and the existing __pad name.
Florian Weimer [Mon, 20 Aug 2018 12:57:13 +0000 (14:57 +0200)]
malloc: Add ChangeLog for accidentally committed change
Commit b90ddd08f6dd688e651df9ee89ca3a69ff88cd0c ("malloc: Additional
checks for unsorted bin integrity I.") was committed without a
whitespace fix, so it is adjusted here as well.
powerpc: Remove powerpc specific sinf and cosf optimization
New generic optimization of sinf and cosf introduced by commit 599cf3976679e1b345307d9c02057f02aa95528f shows improvement
compared to powerpc specific assembly version. Hence removing
the powerpc assembly versions to make use of generic code.
Istvan Kurucsai [Tue, 16 Jan 2018 13:54:32 +0000 (14:54 +0100)]
malloc: Additional checks for unsorted bin integrity I.
On Thu, Jan 11, 2018 at 3:50 PM, Florian Weimer <fweimer@redhat.com> wrote:
> On 11/07/2017 04:27 PM, Istvan Kurucsai wrote:
>>
>> + next = chunk_at_offset (victim, size);
>
>
> For new code, we prefer declarations with initializers.
Noted.
>> + if (__glibc_unlikely (chunksize_nomask (victim) <= 2 * SIZE_SZ)
>> + || __glibc_unlikely (chunksize_nomask (victim) >
>> av->system_mem))
>> + malloc_printerr("malloc(): invalid size (unsorted)");
>> + if (__glibc_unlikely (chunksize_nomask (next) < 2 * SIZE_SZ)
>> + || __glibc_unlikely (chunksize_nomask (next) >
>> av->system_mem))
>> + malloc_printerr("malloc(): invalid next size (unsorted)");
>> + if (__glibc_unlikely ((prev_size (next) & ~(SIZE_BITS)) !=
>> size))
>> + malloc_printerr("malloc(): mismatching next->prev_size
>> (unsorted)");
>
>
> I think this check is redundant because prev_size (next) and chunksize
> (victim) are loaded from the same memory location.
I'm fairly certain that it compares mchunk_size of victim against
mchunk_prev_size of the next chunk, i.e. the size of victim in its
header and footer.
>> + if (__glibc_unlikely (bck->fd != victim)
>> + || __glibc_unlikely (victim->fd != unsorted_chunks (av)))
>> + malloc_printerr("malloc(): unsorted double linked list
>> corrupted");
>> + if (__glibc_unlikely (prev_inuse(next)))
>> + malloc_printerr("malloc(): invalid next->prev_inuse
>> (unsorted)");
>
>
> There's a missing space after malloc_printerr.
Noted.
> Why do you keep using chunksize_nomask? We never investigated why the
> original code uses it. It may have been an accident.
You are right, I don't think it makes a difference in these checks. So
the size local can be reused for the checks against victim. For next,
leaving it as such avoids the masking operation.
> Again, for non-main arenas, the checks against av->system_mem could be made
> tighter (against the heap size). Maybe you could put the condition into a
> separate inline function?
We could also do a chunk boundary check similar to what I proposed in
the thread for the first patch in the series to be even more strict.
I'll gladly try to implement either but believe that refining these
checks would bring less benefits than in the case of the top chunk.
Intra-arena or intra-heap overlaps would still be doable here with
unsorted chunks and I don't see any way to counter that besides more
generic measures like randomizing allocations and your metadata
encoding patches.
I've attached a revised version with the above comments incorporated
but without the refined checks.
Thanks,
Istvan
From a12d5d40fd7aed5fa10fc444dcb819947b72b315 Mon Sep 17 00:00:00 2001
From: Istvan Kurucsai <pistukem@gmail.com>
Date: Tue, 16 Jan 2018 14:48:16 +0100
Subject: [PATCH v2 1/1] malloc: Additional checks for unsorted bin integrity
I.
Ensure the following properties of chunks encountered during binning:
- victim chunk has reasonable size
- next chunk has reasonable size
- next->prev_size == victim->size
- valid double linked list
- PREV_INUSE of next chunk is unset
Pochang Chen [Thu, 16 Aug 2018 19:24:24 +0000 (15:24 -0400)]
malloc: Verify size of top chunk.
The House of Force is a well-known technique to exploit heap
overflow. In essence, this exploit takes three steps:
1. Overwrite the size of top chunk with very large value (e.g. -1).
2. Request x bytes from top chunk. As the size of top chunk
is corrupted, x can be arbitrarily large and top chunk will
still be offset by x.
3. The next allocation from top chunk will thus be controllable.
If we verify the size of top chunk at step 2, we can stop such attack.
This patch moves little endian specific POWER9 optimization files to
sysdeps/powerpc/powerpc64/le and creates POWER9 ifunc functions
only for little endian.
[aarch64] Add an ASIMD variant of strlen for falkor
This variant of strlen uses vector loads and operations to reduce the
size of the code and also eliminate the non-ascii fallback. This
works very well for falkor because of its two vector units and
efficient vector ops. In the best case it reduces latency of cases in
bench-strlen by 48%, with gains throughout the benchmark.
strlen-walk also sees uniform gains in the 5%-15% range.
Overall the routine appears to work better than the stock one for falkor
regardless of the benchmark, length of string or cache state.
The same cannot be said of a53 and a72 though. a53 performance was
greatly reduced and for a72 it was a bit of a mixed bag, slightly on the
negative side but I reckon it might be fast in some situations.
* sysdeps/aarch64/strlen.S (__strlen): Rename to STRLEN.
[!STRLEN](STRLEN): Set to __strlen.
* sysdeps/aarch64/multiarch/strlen.c: New file.
* sysdeps/aarch64/multiarch/strlen_generic.S: Likewise.
* sysdeps/aarch64/multiarch/strlen_asimd.S: Likewise.
* sysdeps/aarch64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add strlen.
* sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add
strlen_generic and strlen_asimd.
Wilco Dijkstra [Wed, 15 Aug 2018 15:01:21 +0000 (16:01 +0100)]
Use generic sinf/cosf in lgammaf_r
The internal functions __kernel_sinf and __kernel_cosf are used only by
lgammaf_r. Removing the internal functions and using the generic sinf
and cosf is better overall. Benchmarking on Cortex-A72 shows the generic
sinf and cosf are 1.4x and 2.3x faster in the range |x| < PI/4, and 0.66x
and 1.1x for |x| < PI/2, so it should make lgammaf_r faster on average.
GLIBC regression tests pass on AArch64.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (sin_pif): Use __sinf/__cosf.
* sysdeps/ieee754/flt-32/k_cosf.c (__kernel_cosf): Remove all code.
* sysdeps/ieee754/flt-32/k_sinf.c (__kernel_sinf): Likewise.
Wilco Dijkstra [Tue, 14 Aug 2018 09:45:59 +0000 (10:45 +0100)]
Improve performance of sinf and cosf
The second patch improves performance of sinf and cosf using the same
algorithms and polynomials. The returned values are identical to sincosf
for the same input. ULP definitions for AArch64 and x64 are updated.
Joseph Myers [Mon, 13 Aug 2018 21:35:27 +0000 (21:35 +0000)]
Update syscall-names.list for Linux 4.18.
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for
Linux 4.18. The io_pgetevents and rseq syscalls are added to the
kernel on various architectures, so need to be mentioned in this file.
Tested with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.18.
(io_pgetevents): New syscall.
(rseq): Likewise.
Joseph Myers [Mon, 13 Aug 2018 17:20:46 +0000 (17:20 +0000)]
Update install.texi documentation of uses of Perl and Python.
The install.texi documentation of uses of Perl and Python is
substantially out of date.
The description of Perl is "to test the installation" (which I
interpret as referring to test-installation.pl), but it's used for
more tests than that, and to build the manual, and to regenerate one
file in the source tree.
The description of Python is only for pretty-printer tests, but it's
used for other tests / benchmarks as well (and for other internal uses
such as updating Unicode data, for which we already require Python 3,
but I think install.texi only needs to describe uses from the main
glibc Makefiles).
This patch updates the descriptions of what those tools are used for.
The Python information (and information about other tools for testing
pretty printers) was awkwardly in the middle of the general
description of building and testing glibc, rather than with the rest
of information about tools used in glibc build and test; this patch
moves the information about those tools into the main list.
Tested with regeneration of INSTALL as well as "make info" and "make
pdf".
* manual/install.texi (Configuring and compiling): Do not list
tools used for testing pretty printers here.
(Tools for Compilation): List Python, PExpect and GDB here.
Update descriptions of uses of Perl and Python.
* INSTALL: Regenerate.
Florian Weimer [Mon, 13 Aug 2018 12:05:00 +0000 (14:05 +0200)]
mbstowcs: Remove outdated comment
ISO C requires that there is no effect on any global conversion state,
so the change in commit 9f097308c7465443765d1e25699a4cf33eff5455 was
correct in princple.
Paul Eggert [Fri, 10 Aug 2018 21:19:05 +0000 (14:19 -0700)]
regex: Gnulib unibyte RRI uses bytes not chars
Adjust the non-glibc code to agree with what Gawk needs for
rational range interpretation (RRI) for regular expression ranges.
In unibyte locales, Gawk wants ranges to use the underlying byte
rather than the character code point. This change does not affect
glibc proper.
* posix/regcomp.c (parse_byte) [!LIBC && RE_ENABLE_I18N]:
In unibyte locales, use the byte value rather than
running it through btowc.
Joseph Myers [Fri, 10 Aug 2018 19:22:01 +0000 (19:22 +0000)]
Move SNAN_TESTS_* out of math-tests.h.
Continuing moving macros out of math-tests.h to smaller headers
following typo-proof conventions instead of using #ifndef, this patch
moves the SNAN_TESTS_* macros for individual types out to their own
sysdeps header (while the type-generic SNAN_TESTS wrapper for those
macros remains in math-tests.h).
Tested for x86_64 and x86, and with build-many-glibcs.py.
* sysdeps/generic/math-tests-snan.h: New file.
* sysdeps/generic/math-tests.h: Include <math-tests-snan.h>.
(SNAN_TESTS_float): Do not define here.
(SNAN_TESTS_double): Likewise.
(SNAN_TESTS_long_double): Likewise.
(SNAN_TESTS_float128): Likewise.
* sysdeps/i386/fpu/math-tests-snan.h: New file.
* sysdeps/i386/fpu/math-tests.h: Remove file.
* sysdeps/ia64/math-tests-snan.h: New file.
* sysdeps/ia64/math-tests.h: Remove file.
* sysdeps/x86/math-tests.h: Likewise.
* sysdeps/x86_64/fpu/math-tests-snan.h: New file.
Wilco Dijkstra [Fri, 10 Aug 2018 16:31:30 +0000 (17:31 +0100)]
Improve performance of sincosf
This patch is a complete rewrite of sincosf. The new version is
significantly faster, as well as simple and accurate.
The worst-case ULP is 0.5607, maximum relative error is 0.5303 * 2^-23 over
all 4 billion inputs. In non-nearest rounding modes the error is 1ULP.
The algorithm uses 3 main cases: small inputs which don't need argument
reduction, small inputs which need a simple range reduction and large inputs
requiring complex range reduction. The code uses approximate integer
comparisons to quickly decide between these cases.
The small range reducer uses a single reduction step to handle values up to
120.0. It is fastest on targets which support inlined round instructions.
The large range reducer uses integer arithmetic for simplicity. It does a
32x96 bit multiply to compute a 64-bit modulo result. This is more than
accurate enough to handle the worst-case cancellation for values close to
an integer multiple of PI/4. It could be further optimized, however it is
already much faster than necessary.
Szabolcs Nagy [Wed, 4 Jul 2018 11:29:29 +0000 (12:29 +0100)]
Clean up converttoint handling and document the semantics
This patch currently only affects aarch64.
The roundtoint and converttoint internal functions are only called with small
values, so 32 bit result is enough for converttoint and it is a signed int
conversion so the return type is changed to int32_t.
The original idea was to help the compiler keeping the result in uint64_t,
then it's clear that no sign extension is needed and there is no accidental
undefined or implementation defined signed int arithmetics.
But it turns out gcc does a good job with inlining so changing the type has
no overhead and the semantics of the conversion is less surprising this way.
Since we want to allow the asuint64 (x + 0x1.8p52) style conversion, the top
bits were never usable and the existing code ensures that only the bottom
32 bits of the conversion result are used.
On aarch64 the neon intrinsics (which round ties to even) are changed to
round and lround (which round ties away from zero) this does not affect the
results in a significant way, but more portable (relies on round and lround
being inlined which works with -fno-math-errno).
The TOINT_SHIFT and TOINT_RINT macros were removed, only keep separate code
paths for TOINT_INTRINSICS and !TOINT_INTRINSICS.
* sysdeps/aarch64/fpu/math_private.h (roundtoint): Use round.
(converttoint): Use lround.
* sysdeps/ieee754/flt-32/math_config.h (roundtoint): Declare and
document the semantics when TOINT_INTRINSICS is set.
(converttoint): Likewise.
(TOINT_RINT): Remove.
(TOINT_SHIFT): Remove.
* sysdeps/ieee754/flt-32/e_expf.c (__expf): Remove the TOINT_RINT code
path.
Florian Weimer [Fri, 10 Aug 2018 08:20:13 +0000 (10:20 +0200)]
Linux: Rewrite __old_getdents64 [BZ #23497]
Commit 298d0e3129c0b5137f4989275b13fe30d0733c4d ("Consolidate Linux
getdents{64} implementation") broke the implementation because it does
not take into account struct offset differences.
The new implementation is close to the old one, before the
consolidation, but has been cleaned up slightly.
Ilya Leoshkevich [Fri, 10 Aug 2018 07:07:44 +0000 (09:07 +0200)]
S390: Implement 64-bit __fentry__
* Since __fentry__ is almost the same as _mcount, reuse the code by
#including it twice with different #defines around.
* Remove LA usages - they are needed in 31-bit mode to clear the top
bit, but in 64-bit they appear to do nothing.
* Add CFI rule for the nonstandard return register. This rule applies
to the current function (binutils generates a new CIE - see
gas/dw2gencfi.c:select_cie_for_fde()), so it is not necessary to put
__fentry__ into a new file.
* Fix CFI offset for %r14.
* Add CFI rule for %r0.
* Fix unwound value of %r15 being off by 244 bytes.
* Unwinding in __fentry__@plt does not work, no plan to fix it - it
would require asking linker to generate CFI for return address in
%r0. From functional perspective keeping it broken is fine, since
the callee did not have a chance to do anything yet. From
convenience perspective it would be possible to enhance GDB in the
future to treat __fentry__@plt in a special way.
* Fix whitespace.
* Fix offsets in comments, which were copied from 32-bit code.
* 32-bit version will not be implemented, since it's not compatible
with the corresponding PLT stubs: they assume %r12 points to GOT,
which is not the case for gcc-emitted __fentry__ stub, which runs
before the prolog.
This patch adds the runtime support in glibc for the -mfentry
gcc feature introduced in [1] and [2].
* sysdeps/s390/s390-64/Versions (__fentry__): Add.
* sysdeps/s390/s390-64/s390x-mcount.S: Move the common
code to s390x-mcount.h and #include it.
* sysdeps/s390/s390-64/s390x-mcount.h: New file.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
(__fentry__): Add.
Ilya Leoshkevich [Fri, 10 Aug 2018 07:07:44 +0000 (09:07 +0200)]
Move __fentry__ version definition to sysdeps/{i386,x86_64}
__fentry__ symbol is currently not defined for other architectures.
Attempts to introduce it cause abicheck to fail, because it will be
available since 2.29 earliest, and not 2.13, which is the case for
Intel. With the new code, abicheck passes for i686-linux-gnu,
x86_64-linux-gnu and x86_64-linux-gnu32 triples.
Ilya Leoshkevich [Fri, 10 Aug 2018 07:07:43 +0000 (09:07 +0200)]
S390: Test that lazy binding does not clobber R0
The following combinations need to be tested:
* 32- (g5, esa and zarch) and 64-bit
* linux32 glibc/configure CC='gcc -m31 -march=g5'
* linux32 glibc/configure CC='gcc -m31'
* linux32 glibc/configure CC='gcc -m31 -mzarch'
* With and without VX:
* glibc/configure libc_cv_asm_s390_vx=no
* With and without profiling (using LD_PROFILE)
* With and without pltexit (using LD_AUDIT)
ChangeLog:
* sysdeps/s390/Makefile: Register the new tests.
* sysdeps/s390/tst-dl-runtime-mod.S: New file.
* sysdeps/s390/tst-dl-runtime-profile-audit.c: New file.
* sysdeps/s390/tst-dl-runtime-profile-noaudit.c: New file.
* sysdeps/s390/tst-dl-runtime-resolve-audit.c: New file.
* sysdeps/s390/tst-dl-runtime-resolve-noaudit.c: New file.
* sysdeps/s390/tst-dl-runtime.c: New file.
Joseph Myers [Thu, 9 Aug 2018 15:34:12 +0000 (15:34 +0000)]
Replace gen-libm-test.pl with gen-libm-test.py.
Following the recent discussion of using Python instead of Perl and
Awk for glibc build / test, this patch replaces gen-libm-test.pl with
a new gen-libm-test.py script. This script should work with all
Python versions supported by glibc (tested by hand with Python 2.7,
tested in the build system with Python 3.5; configure prefers Python 3
if available).
This script is designed to give identical output to gen-libm-test.pl
for ease of verification of the change, except for generated comments
referring to .py instead of .pl. (That is, identical for actual
inputs passed to the script, not necessarily for all possible input;
for example, this version more precisely follows the C standard syntax
for floating-point constants when deciding when to add LIT macro
calls.) In one place a comment notes that the generation of
NON_FINITE flags is replicating a bug in the Perl script to assist in
such comparisons (with the expectation that this bug can then be
separately fixed in the Python script later).
Tested for x86_64, including comparison of generated files (and hand
testing of the case of generating a sorted libm-test-ulps file, which
isn't covered by normal "make check").
I'd expect to follow this up by extending the new script to produce
the ulps tables for the manual as well (replacing
manual/libm-err-tab.pl, so that then we just have one ulps file
parser) - at which point the manual build would depend on both Perl
and Python (eliminating the Perl dependency would require someone to
rewrite summary.pl in Python, and that would only eliminate the
*direct* Perl dependency; current makeinfo is written in Perl so there
would still be an indirect dependency).
I think install.texi is more or less equally out-of-date regarding
Perl and Python uses before and after this patch, so I don't think
this patch depends on my patch
<https://sourceware.org/ml/libc-alpha/2018-08/msg00133.html> to update
install.texi regarding such uses (pending review).
MIN_PAGE_SIZE is normally set to 4096 but for testing it can be set to
16 so that it exercises the page crossing code for every misaligned
access. The value was set to 15, which is obviously wrong, so fixed
as obvious and tested.
Joseph Myers [Wed, 8 Aug 2018 16:16:59 +0000 (16:16 +0000)]
Move comment from libm-test-nextdown.inc to libm-test-nexttoward.inc.
When libm tests were split into separate per-function .inc files, a
comment relating to the nexttoward tests ended up at the end of
libm-test-nextdown.inc (because the split was based on starting each
function's tests with the <function>_test_data definition, which
failed to allow for comments before such definitions). This patch
moves that comment to the correct location.
Drop realloc_bufs in favour of making alloc_bufs transparently
reallocate the buffers if it had allocated before. Also consolidate
computation of buffer lengths so that they don't get repeated on every
reallocation.
* benchtests/bench-string.h (buf1_size, buf2_size): New
variables.
(init_sizes): New function.
(test_init): Use it.
(alloc_buf, exit_error): New functions.
(alloc_bufs): Use ALLOC_BUF.
(realloc_bufs): Remove.
* benchtests/bench-memcmp.c (do_test): Adjust.
* benchtests/bench-memset-large.c (do_test): Likewise.
* benchtests/bench-memset-walk.c (do_test): Likewise.
* benchtests/bench-memset.c (do_test): Likewise.
* benchtests/bench-strncmp.c (do_test): Likewise.
Andreas Schwab [Thu, 12 Jul 2018 07:24:36 +0000 (09:24 +0200)]
RISC-V: Don't use ps_get_thread_area in libthread_db (bug 23402)
Since RISC-V stores the thread pointer in a general register libthread_db
can just ask the debugger for the register contents instead of trying to
call ps_get_thread_area. This enables thread debugging in gdb.
* sysdeps/riscv/nptl/tls.h (DB_THREAD_SELF): Use REGISTER instead
of CONST_THREAD_AREA.
DJ Delorie [Fri, 3 Aug 2018 17:52:01 +0000 (13:52 -0400)]
Regen RISC-V rvd ULPs
* sysdeps/riscv/rv64/rvd/libm-test-ulps: Update.
Note: I regen'd these from scratch, but I'm only committing the
increases, as I only tested on hardware. There were a few 2->1
decreases that I omitted, possibly "for now".
Joseph Myers [Fri, 3 Aug 2018 16:56:02 +0000 (16:56 +0000)]
Consistently terminate libm-test-*.inc TEST lines with commas.
Some TEST_* lines in libm-test-*.inc end with semicolons not commas.
This works at present because gen-libm-test.pl ignores whatever comes
after the TEST_* call, but is logically wrong (since the TEST_* calls
generate array elements, not statements) and the Python replacement
for gen-libm-test.pl that I'm working on is stricter about the syntax
here. This patch fixes the lines in question to use commas like most
such lines already do.
Tested for x86_64.
* math/libm-test-ilogb.inc (ilogb_test_data): Use ',' not ';'
after TEST_* calls.
* math/libm-test-llogb.inc (llogb_test_data): Likewise.
* math/libm-test-logb.inc (logb_test_data): Likewise.
Wilco Dijkstra [Fri, 3 Aug 2018 16:24:12 +0000 (17:24 +0100)]
Simplify and speedup strstr/strcasestr first match
Looking at the benchtests, both strstr and strcasestr spend a lot of time
in a slow initialization loop handling one character per iteration.
This can be simplified and use the much faster strlen/strnlen/strchr/memcmp.
Read ahead a few cachelines to reduce the number of strnlen calls, which
improves performance by ~3-4%. This patch improves the time taken for the
full strstr benchtest by >40%.
* string/strcasestr.c (STRCASESTR): Simplify and speedup first match.
* string/strstr.c (AVAILABLE): Likewise.
H.J. Lu [Fri, 3 Aug 2018 15:04:49 +0000 (08:04 -0700)]
x86: Don't include <init-arch.h> in assembly codes
There is no need to include <init-arch.h> in assembly codes since all
x86 IFUNC selector functions are written in C. Tested on i686 and
x86-64. There is no code change in libc.so, ld.so and libmvec.so.
Carlos O'Donell [Thu, 26 Jul 2018 14:14:55 +0000 (10:14 -0400)]
Add convenience target 'install-locale-files'.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.
You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
Joseph Myers [Thu, 2 Aug 2018 15:53:29 +0000 (15:53 +0000)]
Do not define various fenv.h macros for MIPS soft-float (bug 23479).
MIPS soft-float glibc does not support floating-point exceptions and
rounding modes, and uses a different ABI from hard-float so a
soft-float compilation cannot use a glibc that does support
floating-point exceptions and rounding modes. Thus, bits/fenv.h
should not, when compiling for soft-float, define macros for the
unsupported features.
This patch changes it accordingly to define those macros only for
hard-float. None of the exception macros are defined for soft-float,
with FE_ALL_EXCEPT defined to 0 in that case, and only FE_TONEAREST is
defined of the rounding-mode macros, and FE_NOMASK_ENV is not defined;
this is consistent with how architectures lacking exception and
rounding mode support generally define things in this header. As well
as making the header more correct for this case, this also means the
generic math_private.h optimizations for this case automatically apply
(inlining libm-internal fenv.h function calls that are trivial when
exceptions and rounding modes are not supported).
The mips64 sfp-machine.h then needs similar changes to disable more of
the exception and rounding mode handling for soft-float. (The mips32
sfp-machine.h is already used only for soft-float, has no integration
with hardware exceptions or rounding modes and so needs no changes.)
Existing binaries might use the old FE_NOMASK_ENV value as an argument
to fesetenv / feupdateenv and expect an error for it (given that it
was defined in a header that also defined FE_ALL_EXCEPT to a nonzero
value). To preserve that error, wrappers for the fallback fesetenv
and feupdateenv are created in sysdeps/mips/nofpu/.
Tested for mips64 (hard-float and soft-float, all three ABIs).
[BZ #23479]
* sysdeps/mips/bits/fenv.h (FE_INEXACT): Define only if
[__mips_hard_float].
(FE_UNDERFLOW): Likewise.
(FE_OVERFLOW): Likewise.
(FE_DIVBYZERO): Likewise.
(FE_INVALID): Likewise.
(FE_ALL_EXCEPT): Define to 0 if [!__mips_hard_float].
(FE_TOWARDZERO): Define only if [__mips_hard_float].
(FE_UPWARD): Likewise.
(FE_DOWNWARD): Likewise.
(__FE_UNDEFINED): Define if [!__mips_hard_float]
(FE_NOMASK_ENV): Define only if [__mips_hard_float].
* sysdeps/mips/mips64/sfp-machine.h (_FP_DECL_EX): Define only if
[__mips_hard_float].
(FP_ROUNDMODE): Likewise.
(FP_RND_NEAREST): Likewise.
(FP_RND_ZERO): Likewise.
(FP_RND_PINF): Likewise.
(FP_RND_MINF): Likewise.
(FP_EX_INVALID): Likewise.
(FP_EX_OVERFLOW): Likewise.
(FP_EX_UNDERFLOW): Likewise.
(FP_EX_DIVZERO): Likewise.
(FP_EX_INEXACT): Likewise.
(FP_INIT_ROUNDMODE): Likewise.
* sysdeps/mips/nofpu/fesetenv.c: New file.
* sysdeps/mips/nofpu/feupdateenv.c: Likewise.
Joseph Myers [Wed, 1 Aug 2018 22:22:00 +0000 (22:22 +0000)]
Fix math/test-misc.c for undefined fenv.h macros.
math/test-misc.c contains some code that uses fenv.h macros
FE_UNDERFLOW, FE_OVERFLOW and FE_UPWARD without being conditional on
those macros being defined.
That would normally break the build for configurations (typically
soft-float) not defining those macros. However, the code in question
is inside LDBL_MANT_DIG > DBL_MANT_DIG conditionals. And, while we
have configurations lacking rounding mode and exception support where
LDBL_MANT_DIG > DBL_MANT_DIG (soft-float MIPS64 and RISC-V), those
configurations currently define the fenv.h macros in question even for
soft-float.
There may be some case for defining those macros in cases where a
soft-float compilation could use a hard-float libm (where both
soft-float and hard-float can use the same ABI, as on ARM and RISC-V,
for example). But MIPS is not such a case - the hard-float and
soft-float ABIs are incompatible - and thus I am testing a patch to
stop defining those macros for soft-float MIPS (motivated by reducing
the extent to which architectures need their own definitions of
math-tests.h macros - if lack of rounding mode / exception support can
be determined by the lack of macros in fenv.h, that avoids the need
for math-tests.h to declare that lack as well). Introducing a case of
LDBL_MANT_DIG > DBL_MANT_DIG without these macros defined shows up the
problem with math/test-misc.c. This patch then fixes that problem by
adding appropriate conditionals.
Tested for MIPS64 in conjunction with changes to stop defining the
macros in question in bits/fenv.h for soft-float.
* math/test-misc.c (do_test) [LDBL_MANT_DIG > DBL_MANT_DIG]: Make
code using FE_UNDERFLOW conditional on [FE_UNDERFLOW], code using
FE_OVERFLOW conditional on [FE_OVERFLOW] and code using FE_UPWARD
conditional on [FE_UPWARD].
Paul Eggert [Wed, 1 Aug 2018 20:22:16 +0000 (13:22 -0700)]
regex: fix memory leak in Gnulib
Problem and fix reported by Assaf Gordon in:
https://lists.gnu.org/r/bug-gnulib/2018-07/txtqLKNwBdefE.txt
* posix/regcomp.c (free_charset) [!_LIBC]: Free range_starts and
range_ends members too, as they are defined in 'struct
re_charset_t' even if not _LIBC. This affects only Gnulib.
Joseph Myers [Wed, 1 Aug 2018 11:21:16 +0000 (11:21 +0000)]
Move SNAN_TESTS_PRESERVE_PAYLOAD out of math-tests.h.
Continuing moving macros out of math-tests.h to smaller headers
following typo-proof conventions instead of using #ifndef, this patch
moves SNAN_TESTS_PRESERVE_PAYLOAD out to its own sysdeps header.
Tested with build-many-glibcs.py.
* sysdeps/generic/math-tests-snan-payload.h: New file.
* sysdeps/hppa/math-tests-snan-payload.h: Likewise.
* sysdeps/mips/math-tests-snan-payload.h: Likewise.
* sysdeps/riscv/math-tests-snan-payload.h: Likewise.
* sysdeps/generic/math-tests.h: Include
<math-tests-snan-payload.h>.
(SNAN_TESTS_PRESERVE_PAYLOAD): Do not define macro here.
* sysdeps/hppa/math-tests.h: Remove file.
* sysdeps/mips/math-tests.h [!__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Do not define macro here.
* sysdeps/riscv/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD):
Likewise.
Joseph Myers [Wed, 1 Aug 2018 11:18:57 +0000 (11:18 +0000)]
Move SNAN_TESTS_TYPE_CAST out of math-tests.h.
The math-tests.h header has many different macros and groups of
macros, defined using #ifndef in the generic version which is included
by architecture versions with #include_next after possibly defining
non-default versions of some of those macros.
This use of #ifndef is contrary to our normal typo-proof conventions
for macro definitions. This patch moves one of the macros,
SNAN_TESTS_TYPE_CAST, out to its own sysdeps header, to follow those
typo-proof conventions more closely.
Tested with build-many-glibcs.py.
2018-08-01 Joseph Myers <joseph@codesourcery.com>
* sysdeps/generic/math-tests-snan-cast.h: New file.
* sysdeps/powerpc/math-tests-snan-cast.h: Likewise.
* sysdeps/generic/math-tests.h: Include <math-tests-snan-cast.h>.
(SNAN_TESTS_TYPE_CAST): Do not define macro here.
* sysdeps/powerpc/math-tests.h (SNAN_TESTS_TYPE_CAST): Likewise.
H.J. Lu [Mon, 30 Jul 2018 23:14:46 +0000 (16:14 -0700)]
x86/CET: Fix property note parser [BZ #23467]
GNU_PROPERTY_X86_FEATURE_1_AND may not be the first property item. We
need to check each property item until we reach the end of the property
or find GNU_PROPERTY_X86_FEATURE_1_AND.
This patch adds 2 tests. The first test checks if IBT is enabled and
the second test reads the output from the first test to check if IBT
is is enabled. The second second test fails if IBT isn't enabled
properly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23467]
* sysdeps/unix/sysv/linux/x86/Makefile (tests): Add
tst-cet-property-1 and tst-cet-property-2 if CET is enabled.
(CFLAGS-tst-cet-property-1.o): New.
(ASFLAGS-tst-cet-property-dep-2.o): Likewise.
($(objpfx)tst-cet-property-2): Likewise.
($(objpfx)tst-cet-property-2.out): Likewise.
* sysdeps/unix/sysv/linux/x86/tst-cet-property-1.c: New file.
* sysdeps/unix/sysv/linux/x86/tst-cet-property-2.c: Likewise.
* sysdeps/unix/sysv/linux/x86/tst-cet-property-dep-2.S: Likewise.
* sysdeps/x86/dl-prop.h (_dl_process_cet_property_note): Parse
each property item until GNU_PROPERTY_X86_FEATURE_1_AND is found.