Joseph Myers [Fri, 24 Apr 2020 22:08:59 +0000 (22:08 +0000)]
Remove most gmp-mparam.h headers.
Most gmp-mparam.h headers in glibc define various macros to the same
values they would be defined to by the generic version of that header,
plus macros IEEE_DOUBLE_BIG_ENDIAN or IEEE_DOUBLE_MIXED_ENDIAN related
to the representation of double. The latter macros are in turn only
used in gmp-impl.h to define union ieee_double_extract, which is not
used in glibc. Thus all of these headers, except for the generic one
and those that define _LONG_LONG_LIMB for ILP32 configurations with
64-bit registers, are redundant, and this patch removes them.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
MIPS needs to ignore certain existing symbols during symbol lookup.
The old scheme uses the ELF_MACHINE_SYM_NO_MATCH macro, with an
inline function, within its own header, with a sysdeps override for
MIPS. This allows re-use of the function from another file (without
having to include <dl-machine.h> or providing the default definition
for ELF_MACHINE_SYM_NO_MATCH).
signal: Only handle on NSIG signals on signal functions (BZ #25657)
The upper bits of the sigset_t s not fully initialized in the signal
mask calls that return information from kernel (sigprocmask,
sigpending, and pthread_sigmask), since the exported sigset_t size
(1024 bits) is larger than Linux support one (64 or 128 bits).
It might make sigisemptyset/sigorset/sigandset fail if the mask
is filled prior the call.
This patch changes the internal signal function to handle up to
supported Linux signal number (_NSIG), the remaining bits are
untouched.
Mike FABIAN [Tue, 14 Apr 2020 16:43:13 +0000 (18:43 +0200)]
Bug 25819: Update to Unicode 13.0.0
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
The __sfp_handle_exceptions is not fully correct regarding raising
exceptions, since there is no direct way to raise only FP_EX_OVERFLOW
nor FP_EX_UNDERFLOW for SSE mode. Both libgcc and feraiseexcept rely
on x87 mode to accomplish it.
The exported x86_64 fenv.h functions operate on both i387 and SSE (since
they should work on both float, double, and long double) while the
internal libc_fe* set either SSE (float, double, and float128) or
i387 (long double).
The libgcc __sfp_handle_exceptions (used on float128 implementation),
however, will set either SEE or i387 exception depending of the
exception to raise. This broke the internal assumption of float128
where only SSE operations will be used.
This patch reimplements the libgcc __sfp_handle_exceptions to use only
SSE operations and sets libgcc to use it instead of its own
implementation.
And I think we should fix libgcc in a similar manner, since checking on
config/i386/64/sfp-machine.h it already only supports SSE rounding mode
and x86_64 ABI also expectes float128 to use SSE registers [1]
(although it is not clear on how future implementation might implement
it).
Carlos O'Donell [Fri, 27 Mar 2020 21:03:36 +0000 (17:03 -0400)]
Reset converter state after second wchar_t output (Bug 25734)
An input BIG5-HKSCS character may be converted into at most 2 wchar_t
characters. After outputting the second whcar_t character (which was
saved in the converter state) we must reset the state. If we fail
to reset the state we will be stuck continually copying that
character to the output even if we have further input to consider.
We add a new test case that covers the 4 BIG5-HKSCS characters
that may become 2 wchar_t characters.
Linux: Remove <sys/sysctl.h> and the sysctl function
Linux 5.5 remove the system call in commit 61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>"). Therefore, the compat function is just a stub that
sets ENOSYS.
Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.
x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it. Otherwise, a new compat symbol would be added.
linux: wait4: Fix incorrect return value comparison
Patch 600f00b "linux: Use long time_t for wait4/getrusage" introduced
two bugs:
- The usage32 struct was set if the wait4 syscall had an error.
- For 32-bit systems the usage struct was set even if it was specified
as NULL.
H.J. Lu [Mon, 13 Apr 2020 17:31:26 +0000 (10:31 -0700)]
x32: Properly pass long to syscall [BZ #25810]
X32 has 32-bit long and pointer with 64-bit off_t. Since x32 psABI
requires that pointers passed in registers must be zero-extended to
64bit, x32 can share many syscall interfaces with LP64. When a LP64
syscall with long and unsigned long arguments is used for x32, these
arguments must be properly extended to 64-bit. Otherwise if the upper
32 bits of the register have undefined value, such a syscall will be
rejected by kernel.
Enforce zero-extension for pointers and array system call arguments.
For integer types, extend to int64_t (the full register) using a
regular cast, resulting in zero or sign extension based on the
signedness of the original type.
For
void *mmap(void *addr, size_t length, int prot, int flags,
int fd, off_t offset);
1. addr is unchanged.
2. length is zero-extend to 64 bits.
3. prot is sign-extend to 64 bits.
4. flags is sign-extend to 64 bits.
5. fd is sign-extend to 64 bits.
6. offset is unchanged.
For int arguments, since kernel uses only the lower 32 bits and ignores
the upper 32 bits in 64-bit registers, these work correctly.
Tested on x86-64 and x32. There are no code changes on x86-64.
Joseph Myers [Thu, 9 Apr 2020 21:21:16 +0000 (21:21 +0000)]
Add GRND_INSECURE from Linux 5.6 to sys/random.h
This patch adds the GRND_INSECURE constant from Linux 5.6 to glibc's
sys/random.h. This is also added to the documentation. The constant
acts as a no-op for the Hurd implementation (as that doesn't check
whether the flags are known), which is semantically fine, while older
Linux kernels reject unknown flags with an EINVAL error.
Joseph Myers [Thu, 9 Apr 2020 21:19:19 +0000 (21:19 +0000)]
Update kernel version to 5.6 in tst-mman-consts.py.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.6. (There are no new constants covered by this test in 5.6 that
need any other header changes.)
powerpc: Update ULPs and xfail more ibm128 outputs
There are 2 new input values that require to be marked as
xfail-rounding:ibm128-libgcc as they're known to fail because of libgcc
issues with different rounding modes.
Otherwise, the other tests just need an increase in ULP.
Confirmed by CLDR and a native speaker: "abril" is more often used even
if "abrial" is also correct. Both nominative (alt_mon) and genitive (mon)
cases are updated.
Lukasz Majewski [Mon, 10 Feb 2020 16:36:33 +0000 (17:36 +0100)]
y2038: linux: Provide __mq_timedreceive_time64 implementation
This patch provides new __mq_timedreceive_time64 explicit 64 bit function for
receiving messages with absolute timeout.
Moreover, a 32 bit version - __mq_timedreceive has been refactored to
internally use __mq_timedreceive_time64.
The __mq_timedreceive is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct
__timespec64 from struct timespec.
The new mq_timedsend_time64 syscall available from Linux 5.1+ has been used,
when applicable.
As this wrapper function is also used internally in the glibc, to e.g. provide
mq_receive implementation, an explicit check for abs_timeout being NULL has been
added due to conversions between struct timespec and struct __timespec64.
Before this change the Linux kernel handled this NULL pointer.
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Linux kernel, headers and minimal kernel version for glibc build test matrix:
- Linux v5.1 (with mq_timedreceive_time64) and glibc built with v5.1 as
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
mq_timedreceive_time64 syscall.
- Linux v4.19 (no mq_timedreceive_time64 support) with default minimal kernel
version for contemporary glibc (3.2.0)
This kernel doesn't support mq_timedreceive_time64 syscall, so the fallback to
mq_timedreceive is tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
Lukasz Majewski [Mon, 10 Feb 2020 09:55:24 +0000 (10:55 +0100)]
y2038: linux: Provide __mq_timedsend_time64 implementation
This patch provides new __mq_timedsend_time64 explicit 64 bit function for
sending messages with absolute timeout.
Moreover, a 32 bit version - __mq_timedsend has been refactored to internally
use __mq_timedsend_time64.
The __mq_timedsend is now supposed to be used on systems still supporting 32
bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct
__timespec64 from struct timespec.
The new __mq_timedsend_time64 syscall available from Linux 5.1+ has been used,
when applicable.
As this wrapper function is also used internally in the glibc, to e.g. provide
mq_send implementation, an explicit check for abs_timeout being NULL has been
added due to conversions between struct timespec and struct __timespec64.
Before this change the Linux kernel handled this NULL pointer.
Run-time tests:
- Run specific tests on ARM/x86 32bit systems (qemu):
https://github.com/lmajewski/meta-y2038 and run tests:
https://github.com/lmajewski/y2038-tests/commits/master
Linux kernel, headers and minimal kernel version for glibc build test matrix:
- Linux v5.1 (with mq_timedsend_time64) and glibc built with v5.1 as a
minimal kernel version (--enable-kernel="5.1.0")
The __ASSUME_TIME64_SYSCALLS flag defined.
- Linux v5.1 and default minimal kernel version
The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports
mq_timedsend_time64 syscall.
- Linux v4.19 (no mq_timedsend_time64 support) with default minimal kernel
version for contemporary glibc (3.2.0)
This kernel doesn't support mq_timedsend_time64 syscall, so the fallback to
mq_timedsend is tested.
Above tests were performed with Y2038 redirection applied as well as without
(so the __TIMESIZE != 64 execution path is checked as well).
Lukasz Majewski [Wed, 12 Feb 2020 09:42:49 +0000 (10:42 +0100)]
y2038: include: Move struct __timespec64 definition to a separate file
The struct __timespec64's definition has been moved from ./include/time.h to
./include/struct___timespec64.h.
This change would prevent from polluting other glibc namespaces (when
headers are modified to support 64 bit time on architectures with
__WORDSIZE==32).
Now it is possible to just include definition of this particular structure
when needed.
DJ Delorie [Sat, 4 Apr 2020 05:44:56 +0000 (01:44 -0400)]
malloc: ensure set_max_fast never stores zero [BZ #25733]
The code for set_max_fast() stores an "impossibly small value"
instead of zero, when the parameter is zero. However, for
small values of the parameter (ex: 1 or 2) the computation
results in a zero being stored anyway.
This patch checks for the parameter being small enough for the
computation to result in zero instead, so that a zero is never
stored.
key values which result in zero being stored:
x86-64: 1..7 (or other 64-bit)
i686: 1..11
armhfp: 1..3 (or other 32-bit)
Paul E. Murphy [Fri, 6 Mar 2020 15:40:27 +0000 (09:40 -0600)]
powerpc64le: enforce non-specific long double in .gnu.attributes section
We turn off this feature to avoid polluting our shared libary with
a specific value. However, static libgcc is not under our control,
and has enabled this for ibm128 routines. This pollutes the
resulting shared libraries with it.
Attach a post-linking hook to replace this section with one crafted
as hard-float + indeterminate ldbl. This allows IEEE ldbl users to
avoid having to disable the gnu attributes feature which should
protect them from linking ibm ldbl libraries using the gnu attributes
feature.
Currently, this only replaces libc and libm which support both ldbl
formats and rely on application code to explicitly determine which
is to be used.
Strictly speaking, the section could be deleted with minimal lost value.
However correctly set attributes could prove useful for some future change,
and similarly missing attributes.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Paul E. Murphy [Fri, 7 Feb 2020 20:08:20 +0000 (14:08 -0600)]
powerpc64le: workaround ieee long double / _Float128 stdc++ bug
-mabi=ieeelongdouble triggers the stdc++ libraries _Float128
support, which then breaks if algorithm is included. For now,
explicitly disable _Float128 for such tests.
I have opened up GCC BZ 94080 to track this.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Paul E. Murphy [Fri, 7 Feb 2020 20:08:12 +0000 (14:08 -0600)]
powerpc64le: Enforce -mabi=ibmlongdouble when -mfloat128 used
I have observed a bug on 7.4.0 whereby __mulkc3 calls are
swapped with __multc3 depending on ABI selection. For the
sake of being overly cautious, build all _Float128 files
with ibm128 to workaround these compilers. This has been
noted in GCC BZ 84914, and will not be fixed for GCC 7.
Likewise, non-math files built with _Float128 are assumed
to have ibm long double. Explicilty preserve this
assumption.
Finally, add some bootstrapping code to avoid applying
these options until IEEE long double is enabled as they
require GCC 7 and above.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Paul E. Murphy [Mon, 16 Mar 2020 15:49:04 +0000 (10:49 -0500)]
ldbl-128ibm: simplify iscanonical.h
The test for enabling _Float128 or IEEE 128 long double can be
greatly simplified knowing that there is no ibm128, thus we require
no special cases, and everything is canonical.
This reverts the changes to ldbl-128ibm iscanonical.h from commit 8dbfea3a2094798a52cebddde01d255483f49665 and extends the check
for __NO_LONG_DOUBLE_MATH to include a check for float128 redirects
to long double.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
H.J. Lu [Mon, 6 Apr 2020 13:02:11 +0000 (06:02 -0700)]
i386: Disable check_consistency for GCC 5 and above [BZ #25788]
check_consistency should be disabled for GCC 5 and above since there is
no fixed PIC register in GCC 5 and above. Check __GNUC_PREREQ (5,0)
instead OPTIMIZE_FOR_GCC_5 since OPTIMIZE_FOR_GCC_5 is false with
-fno-omit-frame-pointer.
All list elements are colon-separated strings, and there is a hard
upper limit for the number of audit modules, so it is possible to
pre-allocate a fixed-size array of strings to which the LD_AUDIT
environment variable and --audit arguments are added.
Also eliminate the global variables for the audit list because
the list is only needed briefly during startup.
There is a slight behavior change: All duplicate LD_AUDIT environment
variables are now processed, not just the last one as before. However,
such environment vectors are invalid anyway.
Adding the test "tst-safe-linking" for testing that Safe-Linking works
as expected. The test checks these 3 main flows:
* tcache protection
* fastbin protection
* malloc_consolidate() correctness
As there is a random chance of 1/16 that of the alignment will remain
correct, the test checks each flow up to 10 times, using different random
values for the pointer corruption. As a result, the chance for a false
failure of a given tested flow is 2**(-40), thus highly unlikely.
Alistair Francis [Mon, 23 Dec 2019 21:26:50 +0000 (13:26 -0800)]
linux: Use long time_t for wait4/getrusage
The Linux kernel expects rusage to use a 32-bit time_t, even on archs
with a 64-bit time_t (like RV32). To address this let's convert
rusage to/from 32-bit and 64-bit to ensure the kernel always gets
a 32-bit time_t.
While we are converting these functions let's also convert them to be
the y2038 safe versions. This means there is a *64 function that is
called by a backwards compatible wrapper.
Alistair Francis [Mon, 23 Dec 2019 19:45:01 +0000 (11:45 -0800)]
linux: Use long time_t __getitimer/__setitimer
The Linux kernel expects itimerval to use a 32-bit time_t, even on archs
with a 64-bit time_t (like RV32). To address this let's convert
itimerval to/from 32-bit and 64-bit to ensure the kernel always gets
a 32-bit time_t.
While we are converting these functions let's also convert them to be
the y2038 safe versions. This means there is a *64 function that is
called by a backwards compatible wrapper.
On y2038 safe 32-bit systems the Linux kernel expects itimerval
and rusage to use a 32-bit time_t, even though the other time_t's
are 64-bit. There are currently no plans to make 64-bit time_t versions
of these structs.
There are also other occurrences where the time passed to the kernel via
timeval doesn't match the wordsize.
To handle these cases let's define a new macro
__KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64. This macro specifies if the
kernel's old_timeval matches the new timeval64. This should be 1 for
64-bit architectures except for Alpha's osf syscalls. The define should
be 0 for 32-bit architectures and Alpha's osf syscalls.
Paul Zimmermann [Mon, 30 Mar 2020 13:55:55 +0000 (15:55 +0200)]
math: Add inputs that yield larger errors for float type (x86_64)
The corner cases included were generated using exhaustive search
for all float/binary32 values on x86_64 (comparing to MPFR for
correct rounding to nearest).
For the j0/j1/y0 functions, only cases with ulp error <= 9 were
included.
Eyal Itkin [Tue, 31 Mar 2020 06:00:14 +0000 (02:00 -0400)]
Fix alignment bug in Safe-Linking
Alignment checks should be performed on the user's buffer and NOT
on the mchunkptr as was done before. This caused bugs in 32 bit
versions, because: 2*sizeof(t) != MALLOC_ALIGNMENT.
As the tcache works on users' buffers it uses the aligned_OK()
check, and the rest work on mchunkptr and therefore check using
misaligned_chunk().
Fix data race in setting function descriptors during lazy binding on hppa.
This addresses an issue that is present mainly on SMP machines running
threaded code. In a typical indirect call or PLT import stub, the
target address is loaded first. Then the global pointer is loaded into
the PIC register in the delay slot of a branch to the target address.
During lazy binding, the target address is a trampoline which transfers
to _dl_runtime_resolve().
_dl_runtime_resolve() uses the relocation offset stored in the global
pointer and the linkage map stored in the trampoline to find the
relocation. Then, the function descriptor is updated.
In a multi-threaded application, it is possible for the global pointer
to be updated between the load of the target address and the global
pointer. When this happens, the relocation offset has been replaced
by the new global pointer. The function pointer has probably been
updated as well but there is no way to find the address of the function
descriptor and to transfer to the target. So, _dl_runtime_resolve()
typically crashes.
HP-UX addressed this problem by adding an extra pc-relative branch to
the trampoline. The descriptor is initially setup to point to the
branch. The branch then transfers to the trampoline. This allowed
the trampoline code to figure out which descriptor was being used
without any modification to user code. I didn't use this approach
as it is more complex and changes function pointer canonicalization.
The order of loading the target address and global pointer in
indirect calls was not consistent with the order used in import stubs.
In particular, $$dyncall and some inline versions of it loaded the
global pointer first. This was inconsistent with the global pointer
being updated first in dl-machine.h. Assuming the accesses are
ordered, we want elf_machine_fixup_plt() to store the global pointer
first and calls to load it last. Then, the global pointer will be
correct when the target function is entered.
However, just to make things more fun, HP added support for
out-of-order execution of accesses in PA 2.0. The accesses used by
calls are weakly ordered. So, it's possibly under some circumstances
that a function might be entered with the wrong global pointer.
However, HP uses weakly ordered accesses in 64-bit HP-UX, so I assume
that loading the global pointer in the delay slot of the branch must
work consistently.
The basic fix for the race is a combination of modifying user code to
preserve the address of the function descriptor in register %r22 and
setting the least-significant bit in the relocation offset. The
latter was suggested by Carlos as a way to distinguish relocation
offsets from global pointer values. Conventionally, %r22 is used
as the address of the function descriptor in calls to $$dyncall.
So, it wasn't hard to preserve the address in %r22.
I have updated gcc trunk and gcc-9 branch to not clobber %r22 in
$$dyncall and inline indirect calls. I have also modified the import
stubs in binutils trunk and the 2.33 branch to preserve %r22. This
required making the stubs one instruction longer but we save one
relocation. I also modified binutils to align the .plt section on
a 8-byte boundary. This allows descriptors to be updated atomically
with a floting-point store.
With these changes, _dl_runtime_resolve() can fallback to an alternate
mechanism to find the relocation offset when it has been clobbered.
There's just one additional instruction in the fast path. I tested
the fallback function, _dl_fix_reloc_arg(), by changing the branch to
always use the fallback. Old code still runs as it did before.
Similar to fenvinline.h removal, this kind of optimization is better
implemented by the compiler. Also newer code avoid setting exceptions
directly (for instance the code to make new logf, log2f and powf
implementatation to now support SVID compat).
The BZ#94194 [1] the corresponding GCC bug for adding replacements
for these on x86.
Similar to string2.h (18b10de7ce) and string3.h (09a596cc2c) this
patch removes the fenvinline.h on all architectures. Currently
only powerpc implements some optimizations. This kind of optimization
is better implemented by the compiler (which handles the architecture
ISA transparently).
Also, for the specific optimized powerpc implementation the code is
becoming convoluted and these micro-optimization are hardly wildly
used, even more being a possible hotspot in realword cases
(non-default rounding are used only on specific cases and exception
handling are done most likely only on errors path). Only x86
implements similar optimization (on fenv.h) also indicates that
these should no be on libc.
The math/test-fenv already covers all math/test-fenvinline tests,
so it is safe to remove it.
The powerpc fegetround optimization is moved to internal
fenv_libc.h.
The BZ#94193 [1] the corresponding GCC bug for adding replacements
for these on powerpc.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Eyal Itkin [Fri, 20 Mar 2020 19:19:17 +0000 (21:19 +0200)]
Add Safe-Linking to fastbins and tcache
Safe-Linking is a security mechanism that protects single-linked
lists (such as the fastbin and tcache) from being tampered by attackers.
The mechanism makes use of randomness from ASLR (mmap_base), and when
combined with chunk alignment integrity checks, it protects the "next"
pointers from being hijacked by an attacker.
While Safe-Unlinking protects double-linked lists (such as the small
bins), there wasn't any similar protection for attacks against
single-linked lists. This solution protects against 3 common attacks:
* Partial pointer override: modifies the lower bytes (Little Endian)
* Full pointer override: hijacks the pointer to an attacker's location
* Unaligned chunks: pointing the list to an unaligned address
The design assumes an attacker doesn't know where the heap is located,
and uses the ASLR randomness to "sign" the single-linked pointers. We
mark the pointer as P and the location in which it is stored as L, and
the calculation will be:
* PROTECT(P) := (L >> PAGE_SHIFT) XOR (P)
* *L = PROTECT(P)
This way, the random bits from the address L (which start at the bit
in the PAGE_SHIFT position), will be merged with LSB of the stored
protected pointer. This protection layer prevents an attacker from
modifying the pointer into a controlled value.
An additional check that the chunks are MALLOC_ALIGNed adds an
important layer:
* Attackers can't point to illegal (unaligned) memory addresses
* Attackers must guess correctly the alignment bits
On standard 32 bit Linux machines, an attack will directly fail 7
out of 8 times, and on 64 bit machines it will fail 15 out of 16
times.
This proposed patch was benchmarked and it's effect on the overall
performance of the heap was negligible and couldn't be distinguished
from the default variance between tests on the vanilla version. A
similar protection was added to Chromium's version of TCMalloc
in 2012, and according to their documentation it had an overhead of
less than 2%.
Reviewed-by: DJ Delorie <dj@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Adhemerval Zacnella <adhemerval.zanella@linaro.org>
Alistair Francis [Fri, 27 Dec 2019 17:07:40 +0000 (09:07 -0800)]
time: Add a timeval with a 32-bit tv_sec and tv_usec
On y2038 safe 32-bit systems the Linux kernel expects itimerval to
use a 32-bit time_t, even though the other time_t's are 64-bit. To
address this let's add a __timeval32 struct to be used internally.
Paul E. Murphy [Fri, 7 Feb 2020 20:08:08 +0000 (14:08 -0600)]
powerpc64: apply -mabi=ibmlongdouble to special files
Some of these files depend on the avoidance of using the various
register sets of POWER. When enabling the IEEE 128 long double,
we must be sure to disable this ABI as some compilers will
refuse to compile if -mno-vsx and -mabi=ieeelongdouble are both
present.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Paul E. Murphy [Fri, 7 Feb 2020 20:08:01 +0000 (14:08 -0600)]
powerpc64le: add -mno-gnu-attribute to *f128 objects and difftime
In practice, this flag should be applied globally, but it makes a good
sanity check to ensure ibm128 and ieee128 long double files are not
getting mismatched. _Float128 files use no long double, thus are
always safe to use this option.
Similarly, when investigating the linker complaints, difftime
makes trivial, self contained, usage of long double, so thus it
is also explicitly marked as such.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Paul E. Murphy [Fri, 7 Feb 2020 20:08:01 +0000 (14:08 -0600)]
Makeconfig: sandwich gnulib-tests between libc/ld linking of tests
This better resembles the default linking process with the gnulibs,
and also resolves the increasingly difficult to maintain
f128-loader-link usage on powerpc64le as some libgcc symbols are
dependent on those found in the loader (ld).
powerpc64le: Ensure correct ldouble compiler flags are used
Ensure the correct ldouble abi flags are applied to ibm128 files and
nldbl files. Remove the IEEE options if used, and apply the flags
used to build ldouble files which are ibm128 abi.
nldbl tests are a little tricky. To use the support, we must remove
all ldouble abi flags, and ensure -mlong-double-64 is used.
Co-authored-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com> Co-authored-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com> Co-authored-by: Paul E. Murphy <murphyp@linux.vnet.ibm.com>
Paul E. Murphy [Fri, 7 Feb 2020 20:08:16 +0000 (14:08 -0600)]
Fix tests which expose ldbl -> _Float128 redirects
The ldbl redirects for ieee128 have some jagged edges when
inspecting and manipulating symbols directly.
e.g asprintf is unconditionally redirected to __asprintfieee128
thus any tests relying on GCC's redirect behavior will encounter
problems if they inspect the symbol names too closely.
I've mitigated tests which expose the limitations of the
ldbl -> f128 redirects by giving them knowledge about the
redirected symbol names.
Hopefully there isn't much user code which depends on this
implementation specific behavior.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Paul E. Murphy [Fri, 7 Feb 2020 20:07:55 +0000 (14:07 -0600)]
ldbl-128ibm-compat: PLT redirects for using ldbl redirects internally
Tweak the PLT bypass magic when building glibc with long double
redirects. This is made more difficult by the fact we only get
one chance to redirect functions. This happens via the public
headers.
There are roughly three classes of redirect we need to attend to
today:
1. Simple redirects, redirected via cdef macro overrides and
and new libc_hidden_ldbl_proto macro.
2. Internal usage of internal API, e.g __snprintf, which has
no direct analogue. This is bypassed directly on case-by-
case basis.
3. Double redirects, e.g sscanf and related. These require
a heavier handed approach of macro renaming to existing
symbols.
Most simple redirects are handled via 1. Ideally, the libc_*
macro would live in libc-symbols.h, but in practice the macros
needed for it to do anything useful live in cdefs.h, so they
are defined in the local override.
Notably, the internal name of the asprintf generated for ieee ldbl
redirects is renamed to work with internal prefixed usage.
This resolves the local plt usage introduced when building glibc
with ldbl == ieee128 on ppc64le.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Lukasz Majewski [Sat, 14 Mar 2020 23:18:36 +0000 (00:18 +0100)]
y2038: fix: Add missing libc_hidden_def attribute for some syscall wrappers
During the conversion to support 64 bit time on some architectures with
__WORDSIZE == 32 && __TIMESIZE != 64 the libc_hidden_def attribute for
eligible functions was by mistake omitted.
This patch fixes this issue and exports (and allows using) those
functions when Y2038 support is enabled in glibc.
Carlos O'Donell [Thu, 5 Mar 2020 02:19:36 +0000 (21:19 -0500)]
Extended Char Intro: Use getwc in example (Bug 25626)
In the "Extended Char Intro" the example incorrectly uses a function
called wgetc which doesn't exist. The example is corrected to use
getwc, which is correct for the use in this case.
Florian Weimer [Thu, 19 Mar 2020 21:32:28 +0000 (18:32 -0300)]
stdio: Remove memory leak from multibyte convertion [BZ#25691]
This is an updated version of a previous patch [1] with the
following changes:
- Use compiler overflow builtins on done_add_func function.
- Define the scratch +utstring_converted_wide_string using
CHAR_T.
- Added a testcase and mention the bug report.
Both default and wide printf functions might leak memory when
manipulate multibyte characters conversion depending of the size
of the input (whether __libc_use_alloca trigger or not the fallback
heap allocation).
This patch fixes it by removing the extra memory allocation on
string formatting with conversion parts.
The testcase uses input argument size that trigger memory leaks
on unpatched code (using a scratch buffer the threashold to use
heap allocation is lower).
With mathinline removal there is no need to keep building and testing
inline math tests.
The gen-libm-tests.py support to generate ULP_I_* is removed and all
libm-test-ulps files are updated to longer have the
i{float,double,ldouble} entries. The support for no-test-inline is
also removed from both gen-auto-libm-tests and the
auto-libm-test-out-* were regenerated.
This is similar to x86 (da75c1b180f9355a) and powerpc (32ea72999693b98e)
mathinline.h removal. The required macros to build the fpu routines
are moved to mathimpl.h, while the inline optimization macros for
atan, tanh, rint, log1p, significand, trunc, floor, ceil, isinf,
finite, scalbn, isnan, scalbln, nearbyint, lrint, and sincos are removed.
The gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94204 was
created to track builtin support.
Checked with a build against m68k-linux-gnu, resulting binaries
are similar with and without the patch.
H.J. Lu [Wed, 18 Mar 2020 11:35:54 +0000 (04:35 -0700)]
x86: Remove ARCH_CET_LEGACY_BITMAP [BZ #25397]
Since legacy bitmap doesn't cover jitted code generated by legacy JIT
engine, it isn't very useful. This patch removes ARCH_CET_LEGACY_BITMAP
and treats indirect branch tracking similar to shadow stack by removing
legacy bitmap support.
Tested on CET Linux/x86-64 and non-CET Linux/x86-64.