Ken Brown [Mon, 8 Feb 2021 20:00:24 +0000 (15:00 -0500)]
Revert "Cygwin: fstat_helper: always use handle in call to get_file_attribute"
This reverts commit 76dca77f049271e2529c25de8a396e65dbce615d. That
commit was based on the incorrect assumption that get_stat_handle,
when called on a FIFO in fstat_helper, would always return a handle
that is safe to use for getting the file information.
That assumption is true in many cases but not all. For example, if
the call to fstat_helper arises from a call to fstat(2) on a FIFO that
has been opened for writing, then get_stat_handle will return a pipe
handle instead of a file handle.
Eshan dhawan [Wed, 3 Feb 2021 22:04:06 +0000 (03:34 +0530)]
Removed Soft float from MIPS
This Patch removes Soft Float code from MIPS.
Instead It adds the soft float code from RISCV
The code came from FreeBSD and assumes the FreeBSD softfp
implementation not the one with GCC. That was an overlooked and
fixed in the other fenv code already.
Ken Brown [Sat, 30 Jan 2021 15:28:06 +0000 (10:28 -0500)]
Cygwin: recognize native Windows AF_UNIX sockets as reparse points
Allow check_reparse_point_target to recognize reparse points with
reparse tag IO_REPARSE_TAG_AF_UNIX. These are used in recent versions
of Windows 10 to represent AF_UNIX sockets.
check_reparse_point_target now returns PATH_REP on files of this type,
so that they are treated as known reparse points (but not as sockets).
This allows tools like 'rm', 'ls', etc. to operate on these files.
Ken Brown [Fri, 29 Jan 2021 14:14:35 +0000 (09:14 -0500)]
Cygwin: remove the OPEN_MAX_MAX macro
Replace all occurrences of OPEN_MAX_MAX by OPEN_MAX, and define the
latter to be 3200, which was the value of the former. In view of the
recent change to getdtablesize, there is no longer a need to
distinguish between these two macros.
Now that getdtablesize always returns OPEN_MAX_MAX, we can simplify
sysconf(_SC_OPEN_MAX) and getrlimit(RLIMIT_NOFILE) to just use that
same constant instead of calling getdtablesize.
Ken Brown [Thu, 28 Jan 2021 01:06:22 +0000 (20:06 -0500)]
Cygwin: getdtablesize: always return OPEN_MAX_MAX
According to the Linux man page for getdtablesize(3), the latter is
supposed to return "the maximum number of files a process can have
open, one more than the largest possible value for a file descriptor."
The constant OPEN_MAX_MAX is the only limit enforced by Cygwin, so we
now return that.
Previously getdtablesize returned the current size of cygheap->fdtab,
Cygwin's internal file descriptor table. But this is a dynamically
growing table, and its current size does not reflect an actual limit
on the number of open files.
With this change, gnulib now reports that getdtablesize and
fcntl(F_DUPFD) work on Cygwin. Packages like GNU tar that use the
corresponding gnulib modules will no longer use gnulib replacements on
Cygwin.
Cygwin: exceptions.cc: Suspend all threads in sig_handle_tty_stop().
- Currently, thread created by pthread_create() is not suspended by
the signal SIGTSTP. For example, even if a process with a thread
is suspended by Ctrl-Z, the thread continues running. This patch
fixes the issue.
Cygwin: console: Align the behaviour against signal with pty.
- Currently, read() returns -1 with EINTR if the process is suspended
by Ctrl-Z and resumed by fg command, while pty continues to read.
For example, xxd command stops with error "Interrupted system call"
after Ctrl-Z and fg. This patch aligns the behaviour with pty (and
Linux).
Ken Brown [Tue, 26 Jan 2021 20:54:05 +0000 (15:54 -0500)]
Cygwin: fchmodat: add limited support for AT_SYMLINK_NOFOLLOW
Allow fchmodat with the AT_SYMLINK_NOFOLLOW flag to succeed on
non-symlinks. Previously it always failed, as it does on Linux. But
POSIX permits it to succeed on non-symlinks even if it fails on
symlinks.
The reason for following POSIX rather than Linux is to make gnulib
report that fchmodat works on Cygwin. This improves the efficiency of
packages like GNU tar that use gnulib's fchmodat module. Previously
such packages would use a gnulib replacement for fchmodat on Cygwin.
Cygwin: pty: Allow multiple apps to enable pseudo console simultaneously.
- After commit bb428520, there has been the disadvantage:
7) Pseudo console cannot be activated if it is already activated for
another process on same pty.
This patch clears this disadvantage.
Cygwin: pty: Make apps using console APIs be able to debug with gdb.
- After commit bb428520, there has been the disadvantage:
2) The apps which use console API cannot be debugged with gdb. This
is because pseudo console is not activated since gdb uses
CreateProcess() rather than exec(). Even with this limitation,
attaching gdb to native app, in which pseudo console is already
activated, works.
This patch clears this disadvantage.
Cygwin: pty: Keep code page between non-cygwin apps.
- After commit bb428520, there has been the disadvantage:
4) Code page cannot be changed by chcp.com. Acctually, chcp works
itself and changes code page of its own pseudo console. However,
since pseudo console is recreated for another process, it cannot
inherit the code page.
This patch clears this disadvantage.
Cygwin: pty: Inherit typeahead data between two input pipes.
- PTY has a problem that the key input, which is typed during windows
native app is running, disappears when it returns to shell. This is
beacuse pty has two input pipes, one is for cygwin apps and the other
one is for native windows apps. The key input during windows native
program is running is sent to the second input pipe while cygwin
shell reads input from the first input pipe. This issue had been
fixed once by commit 29431fcb, however, the new implementation of
pseudo console support by commit bb428520 could not inherit this
feature. This patch realize transfering input data between these
two pipes bidirectionally by utilizing cygwin-console-helper process.
The helper process is launched prior to starting the non-cygwin app,
however, exits immediately unlike previous implementation.
Ken Brown [Tue, 26 Jan 2021 02:05:37 +0000 (21:05 -0500)]
Cygwin: chown: make sure ctime gets updated when necessary
Following POSIX, ensure that ctime is updated if chown succeeds,
unless the new owner is specified as (uid_t)-1 and the new group is
specified as (gid_t)-1. Previously, ctime was unchanged whenever the
owner and group were both unchanged.
Aside from POSIX compliance, this fix makes gnulib report that chown
works on Cygwin. This improves the efficiency of packages like GNU
tar that use gnulib's chown module. Previously such packages would
use a gnulib replacement for chown on Cygwin.
Implement wincap.has_posix_unlink_semantics_with_ignore_readonly and when set
skip setting/clearing of READONLY attribute and instead use
FILE_DISPOSITION_IGNORE_READONLY_ATTRIBUTE
Ken Brown [Wed, 20 Jan 2021 17:01:13 +0000 (12:01 -0500)]
Cygwin: ptsname_r: always return an error number on failure
Return EBADF on a bad file descriptor. Previously 0 was returned, in
violation of the requirement in
https://man7.org/linux/man-pages/man3/ptsname_r.3.html that an error
number should be returned on failure.
We are intentionally deviating from Linux, on which ENOTTY is
returned.
Ken Brown [Wed, 20 Jan 2021 15:12:58 +0000 (10:12 -0500)]
Cygwin: normalize_posix_path: fix error handling when .. is encountered
When .. is in the source path and the path prefix exists but is not a
directory, return ENOTDIR instead of ENOENT. This fixes a POSIX
compliance issue for realpath(3):
Cygwin: console: Fix "Bad file descriptor" error in script command.
- After the commit 72770148, script command exits occasionally with
the error "Bad file descriptor" if it is started in console on Win7
and non-cygwin process is executed. This patch fixes the issue.
Cygwin: pty: Reduce buffer size in get_console_process_id().
- The buffer used in get_console_process_id(), introduced by commit 72770148, is too large and ERROR_NOT_ENOUGH_MEMORY occurs in Win7.
Therefore, the buffer size has been reduced.
Cygwin: pty: Set input_available_event only for cygwin pipe.
- cat exits immediately in the following senario.
1) Execute env CYGWIN=disable_pcon script
2) Execute cmd.exe
3) Execute cat in cmd.exe.
This is caused by setting input_available_event for the pipe for
non-cygwin app. This patch fixes the issue.
Cygwin: pty: Make master thread functions be static.
- The functions pty_master_thread() and pty_master_fwd_thread()
should be static (i.e. should not access class member) because
the instance is deleted if the master is dup()'ed and the first
master is closed. In this case, because the dup()'ed instance
still exists, these master threads are also still alive even
though the instance has been deleted. As a result, accesing
class members in these functions causes accessi violation.
Cygwin: pty: Prevent pty from changing code page of parent console.
- After commit 232fde0e, pty changes console code page when the first
non-cygwin app is executed. If pty is started in real console device,
pty changes the code page of root console. This causes very annoying
result because changing code page changes the font of command prompt
if console is in legacy mode. This patch avoids this by creating a
new invisible console for the first pty started in console device.
Cygwin: pty: Make close_pseudoconsole() be a static member function.
- The function close_pseudoconsole() should be static so that it
can be safely called in spawn.cc even after the fhandler_pty_slave
instance has been deleted. That is, there is a problem with the
current code. This patch fixes the issue.
Cygwin: console: Revise the code to switch xterm mode.
- If application changes the console mode, mode management introduced
by commit 10d8c278 will be corrupted. For example, stdout of jansi
v2.0.1 or later is piped to less, jansi resets the xterm mode flag
ENABLE_VIRTUAL_TERMINA_PROCESSING when jansi is terminated. This
causes garbled output in less because less needs this flag enabled.
This patch fixes the issue.
Cygwin: pty: Add workaround for rlwrap 0.40 or later.
- The workaround for rlwrap introduced by commit 8199b0cc does not
take effect for rlwrap 0.40 or later. This patch add a workaround
for rlwrap 0.40 or later as well.
Update to Linux next 5.10 cpuinfo flags for Intel SDM 36.7.1 Software
Guard Extensions, and 38.1.4 SGX Launch Control Configuration.
Launch control restricts what software can run with enclave protections,
which helps protect the system from bad enclaves.
- Previous workaround has a problem that screen is distorted if up
arrow key is pressed at the first line after running "rlwrap cmd".
This patch fixes the issue.
Cygwin: pty: Check response for CSI6n more strictly.
- Previous code to read response for CSI6n allows invalid response
such as "CSI Pl; Pc H" other than correct response "CSI Pl; Pc R".
With this patch, the response is checked more strictly.
Corinna Vinschen [Mon, 14 Dec 2020 11:29:23 +0000 (12:29 +0100)]
Cygwin: Make sure newer apps get uname_x even when loading uname dynamically
if an application built after API version 334 loads uname dynamically,
it actually gets the old uname, rather than the new uname_x. Fix this by
checking the apps API version in uname and call uname_x instead, if it's
a newer app.
Sebastian Huber [Fri, 4 Dec 2020 07:42:04 +0000 (08:42 +0100)]
arm: Fix memchr() for Armv8-R
The Cortex-R52 processor is an Armv8-R processor with a NEON unit. This
fix prevents conflicting architecture profiles A/R errors issued by the
linker.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Cygwin: pty: Revise the code for timeout in term_has_pcon_cap().
- Sometimes timeout period in term_has_pcon_cap() may not be enough
when the machine slows down for some reason. This patch eases the
issue. In the new code, effective timeout period is expected to be
extended as a result due to slowing-down the wait loop as well when
the machine gets into busy.
Fabian Schriever [Fri, 11 Dec 2020 15:57:35 +0000 (16:57 +0100)]
Fix error in powf for x close to 1 and large y
This patch fixes the error found by Paul Zimmermann (see
https://homepages.loria.fr/PZimmermann/papers/#accuracy) regarding x
close to 1 and rather large y (specifically he found the case
powf(0x1.ffffeep-1,-0x1.000002p+27) which returns +Inf instead of the
correct value). We found 2 more values for x which show the same faulty
behaviour, and all 3 are fixed with this patch. We have tested all
combinations for x in [+1.fffdfp-1, +1.00020p+0] and y in
[-1.000007p+27, -1.000002p+27] and [1.000002p+27,1.000007p+27].
Ken Brown [Mon, 7 Dec 2020 21:19:57 +0000 (16:19 -0500)]
Cygwin: dtable::dup_worker: update comment and debug output
The comment and debug output became obsolete in commit 23771fa1f7 when
dup_worker started calling fhandler_base::clone instead of build_fh_pc
and fhandler_base::operator=.
Mark Geisert [Mon, 7 Dec 2020 10:29:36 +0000 (02:29 -0800)]
Cygwin: Allow to set SO_PEERCRED zero (v2)
The existing code errors as EINVAL any attempt to set a value for
SO_PEERCRED via setsockopt() on an AF_UNIX/AF_LOCAL socket. But to
enable the workaround set_no_getpeereid behavior for Python one has
to be able to set SO_PEERCRED to zero. Ergo, this patch. Python has
no way to specify a NULL pointer for 'optval'.
This v2 of patch allows the original working (i.e., allow NULL,0 for
optval,optlen to mean turn off SO_PEERCRED) in addition to the new
working described above. The sense of the 'if' stmt is reversed for
readability.
Mark Geisert [Mon, 7 Dec 2020 06:17:15 +0000 (22:17 -0800)]
Cygwin: Launch cygmagic with bash, not sh
On some systems /bin/sh is not /bin/bash and cygmagic has bash-isms in
it. So even though cygmagic has a /bin/bash shebang, it also needs to be
launched with bash from within Makefile.in.
Cygwin: add flag to indicate reparse points unknown to WinAPI
https://cygwin.com/pipermail/cygwin/2020-December/246938.html
reports a problem where, when adding a Cygwin default symlink
to $PATH since Cygwin 3.1.5, $PATH handling appears to be broken.
3.1.5 switched to WSL symlinks as Cygwin default symlinks.
A piece of code in path handling skips resolving reparse points
if they are the last component in the path. Thus a reparse point
in $PATH is not resolved but converted to Windows path syntax
verbatim.
If you do this with a WSL symlink, certain WinAPI functions fail.
The underlying $PATH handling fails to recognize the reparse
point in $PATH and returns with STATUS_IO_REPARSE_TAG_NOT_HANDLED.
As a result, the calling WinAPI function fails, most prominently
so CreateProcess.
Fix this problem by adding a PATH_REP_NOAPI bit to path_types
and a matching method path_conv::is_winapi_reparse_point().
Right now this flag is set for WSL symlinks and Cygwin AF_UNIX
sockets (new type implemented as reparse points).
The aforementioned code skipping repare point path resolution calls
is_winapi_reparse_point() rather than is_known_reparse_point(),
so now path resolution is only skipped for reparse points known
to WinAPI.
Cygwin: /proc/sys FS: don't export NFS and DFS as block devices
Network filesystems are not block devices. Apparently this code
hasn't been executed anyway, given how network filesystems are
hidden behind \Device\Mup.
Christian Franke [Sat, 28 Nov 2020 21:09:23 +0000 (22:09 +0100)]
Cygwin: Fix access to block devices below /proc/sys.
Use fhandler_dev_floppy instead of fhandler_procsys for such devices.
The read()/write() functions from fhandler_procsys do not ensure
sector aligned transfers and lseek() fails always.
Signed-off-by: Christian Franke <franke@computer.org>
- If vim is executed in WSL in mintty, some garbage string caused
by "OSC Ps;? BEL/ST" will be shown in some situations. This patch
fixes the issue by removing "OSC Ps;? BEL/ST" from pseudo console
output.
Jon Turney [Wed, 21 Oct 2020 19:41:58 +0000 (20:41 +0100)]
Cygwin: Remove surplus autoconf auxiliary files
Since we are now only configuring once, in winsup, with
AC_CONFIG_AUX_DIR(..), the auxiliary files are taken from the top-level.
(Previously we had a random assorment of AC_CONFIG_AUX_DIR(..) and
AC_CONFIG_AUX_DIR(../..) in winsup subdirectories, so auxiliary files
would be taken from winsup or the top-level.)
Jon Turney [Tue, 6 Oct 2020 15:22:02 +0000 (16:22 +0100)]
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
Jon Turney [Wed, 11 Nov 2020 14:03:58 +0000 (14:03 +0000)]
Cygwin: Drop duplicate C++ flags used to build utils
'-fno-exceptions -fno-rtti' are already present in the compile command
COMPILE.cc set by Makefile.common, so we don't need to add them to
CXXFLAGS as well.
Corinna Vinschen [Tue, 17 Nov 2020 09:50:57 +0000 (10:50 +0100)]
malloc/nano-malloc: correctly check for out-of-bounds allocation reqs
The overflow check in mEMALIGn erroneously checks for INT_MAX,
albeit the input parameter is size_t. Fix this to check for
__SIZE_MAX__ instead. Also, it misses to check the req against
adding the alignment before calling mALLOc.
While at it, add out-of-bounds checks to pvALLOc, nano_memalign,
nano_valloc, and Cygwin's (unused) dlpvalloc.
Jon Turney [Thu, 29 Oct 2020 14:43:32 +0000 (14:43 +0000)]
Cygwin: Ensure temporary directory used by tests exists
By default, libltp tests will create temporary files in a subdirectory
of /tmp, which will (nowadays) be located relative to the test DLL (by
assuming that it is in /bin). This will evaluate to the directory
$target_builddir/winsup/tmp, which doesn't exist.
The location used for these temporary files can be explicitly controlled
by setting the TDIRECTORY env var. Arrange to set that env var to the
/cygdrive path of a tmp subdirectory of the build directory.
Unfortunately, libltp doesn't clean the temporary directory if
TDIRECTORY is set, and some tests assume they are started in a clean
directory, so we need to do that in tcl.