cygwin: unify reparse point checking code into single function
So far we had two functions checking the content of a reparse point,
readdir_check_reparse_point in fhandler_disk_file.cc for the sake of
readdir, and symlink_info::check_reparse_point for the sake of
generic path checking.
* Rename check_reparse_point_target helper to check_reparse_point_string
and convert to static function.
* Create new check_reparse_point_target helper containing the core
reparse point checking code
* Just call check_reparse_point_target from readdir_check_reparse_point
and symlink_info::check_reparse_point and only perform the unique
task in those functions.
Tamar Christina [Thu, 20 Jul 2017 12:28:40 +0000 (13:28 +0100)]
Previous patch to support nosys.specs accidentally broke validation specs because ARM_RDI_MONITOR was never passed to the build rule for crt0.
This fixed the compile for nosys and validation specs
but nosys won't run because of existing limitations to
aarch64's syscalls.c, it requires semihosting to get
commandline arguments and heap info without having a
fallback method as ARM does.
Signed-off-by: Tamar Christina <tamar.christina@arm.com>
With this change the arm platform can now be fully compiled with Clang.
Tested by comparing the output with GCC 4.8.2, and Clang 4.0, using a
variety of arches, big/little endianness, and arm/thumb mode to verify
the generated assembly output matches between GCC vs Clang with UAL, and
also GCC with UAL vs GCC with non-UAL, for all preprocessor code blocks.
The only difference found is an extra nop at the end of the function
when compiled with GCC using armv7-a/thumb/little-endian/-O2 compared to
Clang. The nop is not emitted when compiled in big-endian mode.
Tamar Christina [Wed, 5 Jul 2017 11:54:52 +0000 (12:54 +0100)]
Create a recursive make target that is modeled after the existing multilib makefile config-ml.in which can be used to build the same files within a target multiple ways.
e.g. from the same source file produce multiple libs by varying the
options passed to the compiler.
Signed-off-by: Tamar Christina <tamar.christina@arm.com>
Sebastian Huber [Tue, 4 Jul 2017 09:49:58 +0000 (11:49 +0200)]
Synchronize <strings.h> with latest FreeBSD
Include <strings.h> in <string.h> if __BSD_VISIBLE like on FreeBSD.
Remove redundant declarations from <string.h>. Make ffsl(), ffsll(),
strncasecmp(), strcasecmp_l(), and strncasecmp_l() visible via
__BSD_VISIBLE instead of __GNU_VISIBLE. Add fls(), flsl(), and flsll()
to <strings.h> if __BSD_VISIBLE.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
struct sigaction is POSIX.1-1990 but siginfo_t, which is used by its
sa_sigaction member, is POSIX.1b-1993. Therefore it needs to be guarded
as well, and as part of a union, the struct size is protected.
Sebastian Huber [Thu, 22 Jun 2017 07:22:47 +0000 (09:22 +0200)]
Introduce _REENT_GLOBAL_STDIO_STREAMS
In Newlib, the stdio streams are defined to thread-specific pointers
_reent::_stdin, _reent::_stdout and _reent::_stderr. In case
_REENT_SMALL is not defined, then these pointers are initialized via
_REENT_INIT_PTR() or _REENT_INIT_PTR_ZEROED() to thread-specific FILE
objects provided via _reent::__sf[3]. There are two problems with this
(at least in case of RTEMS).
(1) The thread-specific FILE objects are closed by _reclaim_reent().
This leads to problems with language run-time libraries that provide
wrappers to the C/POSIX stdio streams (e.g. C++ and Ada), since they
use the thread-specific FILE objects of the initialization thread. In
case the initialization thread is deleted, then they use freed memory.
(2) Since thread-specific FILE objects are used with a common output
device via file descriptors 0, 1 and 2, the locking at FILE object level
cannot ensure atomicity of the output, e.g. a call to printf().
Introduce a new Newlib configuration option _REENT_GLOBAL_STDIO_STREAMS
to enable the use of global stdio FILE objects.
As a side-effect this reduces the size of struct _reent by more than
50%.
The _REENT_GLOBAL_STDIO_STREAMS should not be used without
_STDIO_CLOSE_PER_REENT_STD_STREAMS.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Wilco Dijkstra [Thu, 29 Jun 2017 14:32:09 +0000 (14:32 +0000)]
Optimized memcmp
This is an optimized memcmp for AArch64. This is a complete rewrite
using a different algorithm. The previous version split into cases
where both inputs were aligned, the inputs were mutually aligned and
unaligned using a byte loop. The new version combines all these cases,
while small inputs of less than 8 bytes are handled separately.
This allows the main code to be sped up using unaligned loads since
there are now at least 8 bytes to be compared. After the first 8 bytes,
align the first input. This ensures each iteration does at most one
unaligned access and mutually aligned inputs behave as aligned.
After the main loop, process the last 8 bytes using unaligned accesses.
This improves performance of (mutually) aligned cases by 25% and
unaligned by >500% (yes >6 times faster) on large inputs.
Sebastian Pop [Fri, 23 Jun 2017 20:23:09 +0000 (15:23 -0500)]
aarch64: optimize the unaligned case of memcmp
This brings to newlib a performance improvement that we developed in Bionic
libc. That change has been submitted for review to Bionic libc:
https://android-review.googlesource.com/418279
A similar patch has been submitted for review in glibc:
https://sourceware.org/ml/libc-alpha/2017-06/msg01143.html
Patch written by Vikas Sinha and Sebastian Pop.
The performance was measured on the bionic-benchmarks on a hikey (aarch64 8xA53)
board. There was no performance change to the existing benchmark
and a performance improvement on the new benchmark for memcmp
on the unaligned side. The new benchmark has been submitted for
review at https://android-review.googlesource.com/414860
The overall performance improves by 18% for the small data set 8
and the performance improves by 450% for the large data set 64k.
The base is with the libc from /system/lib64. The bionic libc
with this patch is in /data.
Fujii Hironori [Tue, 20 Jun 2017 11:17:09 +0000 (13:17 +0200)]
cygwin: regtool: encode error messages correctly
Error messages of regtool can't be read, which are encoded in,
for instance, SHIFT_JIS in Japanese Windows. Fix by using
wide chars instead of multibyte.
Commit 8a3b3bb4d7224d419cc1a4af60ccf7e70edc876b changed the guard on
some functions from _POSIX_THREADS to __POSIX_VISIBLE. As a consequence,
some use of siginfo_t and pthread_t became visible under configurations
where _POSIX_THREADS is unset but __POSIX_VISIBLE is. Build then fails
because the definition of those types are still unavailable.
This commit make those type definition visible for __POSIX_VISIBLE
configurations. This requires moving the siginfo_t definition out of the
RTEMS specific definitions in sys/signal.h while still guarding it
against cygwin case.
Erik M. Bray [Thu, 15 Jun 2017 13:30:08 +0000 (15:30 +0200)]
Ensure that send() interrupted by a signal returns sucessfully
When SA_RESTART is not set on a socket, a blocking send() that is
interrupted mid-transition by a signal should return success (and
report just how many bytes were actually transmitted).
The err variable used here was not always guaranteed to be set
correctly in the loop, so better to just remove it and call
WSAGetLastError() explicitly.
Yaakov Selkowitz [Wed, 14 Jun 2017 15:20:05 +0000 (10:20 -0500)]
Export XSI sigpause
There are two common sigpause variants, both of which take an int argument.
If you request _XOPEN_SOURCE or _GNU_SOURCE, you get the System V version,
which removes the given signal from the process's signal mask; otherwise
you get the BSD version, which sets the process's signal mask to the given
value.
Yaakov Selkowitz [Tue, 13 Jun 2017 19:51:18 +0000 (14:51 -0500)]
stdio.h: guard function macros with !__cplusplus
While POSIX allows these functions to also be defined as macros in C, in
C++ this is not allowed, and prevents these names (particularly feof) from
being used in a custom namespace.
Corinna Vinschen [Wed, 14 Jun 2017 11:22:56 +0000 (13:22 +0200)]
cygwin: readdir: don't lookup mount target inodes
So far Cygwin's readdir returned the inode number of a mount target
in d_ino, rather than the actual inode number of the mount point in
the underlying filesystem. This not only results in a performance
hit if the mount target is a remote FS, it is also not done on other
POSIX systems.
Remove the code evaluating the mount target inode number.
Joe Lowe [Tue, 13 Jun 2017 18:12:50 +0000 (11:12 -0700)]
readdir() with mount point dentry, return mount point INO
This patch fixes a minor compatibility issue w/ cygwin mount point handling in
readdir(), compared to equivalent behavior of Linux and MacOS. dentry.d_ino
should indicate the INO of the mount point itself, not the target volume root
folder.
Changed return type from readdir_check_reparse_point to uint8_t, to avoid
unnecessarily being implicitly cast to and from a signed int.
Renamed a related local variable "attr" to "oattr" that was eclipsing a member
variable with the same name.
Sebastian Huber [Mon, 12 Jun 2017 06:38:56 +0000 (08:38 +0200)]
Remove FreeBSD specifics from RTEMS <arpa/inet.h>
For whatever reason FreeBSD renames several functions provided by
<arpa/inet.h> and uses weak references to provide the standard function
names. This causes problems on targets lacking proper support for weak
references. We do not need this function renaming on RTEMS.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Silviu Baranga [Mon, 5 Jun 2017 08:54:42 +0000 (09:54 +0100)]
Don't overread or write memory returned by _DTOA_R
Don't over-read memory returned by _DTOA_R, and never write to it
since the result might be a string literal.
For example, when doing:
swprintf(tt, 20, L"%.*f", 6, 0.0);
we will get back "0".
Instead, write the result returned by _DTOA_R to the output buffer.
After this, write the 0 chars directly to the the output buffer
(if there are any). This also has the (marginal) advantage that
we read/write less memory overall.