H.J. Lu [Fri, 9 Jul 2021 03:48:14 +0000 (20:48 -0700)]
Add a generic malloc test for MALLOC_ALIGNMENT
1. Add sysdeps/generic/malloc-size.h to define size related macros for
malloc.
2. Move x86_64/tst-mallocalign1.c to malloc and replace ALIGN_MASK with
MALLOC_ALIGN_MASK.
3. Add tst-mallocalign1 to tests-exclude-mcheck for i386 and x32 since
mcheck doesn't honor MALLOC_ALIGNMENT.
H.J. Lu [Fri, 9 Jul 2021 12:57:51 +0000 (05:57 -0700)]
Properly run tst-spawn5 directly [BZ #28067]
Change tst-spawn5.c to handle tst-spawn5 without optional path to ld.so,
--library-path nor the library path when glibc is configured with
--enable-hardcoded-path-in-tests. This fixes BZ #28067.
nptl: Use out-of-line wake function in __libc_lock_unlock slow path
This slightly reduces code size, as can be seen below.
__libc_lock_unlock is usually used along with __libc_lock_lock in
the same function. __libc_lock_lock already has an out-of-line
slow path, so this change should not introduce many additional
non-leaf functions.
This change also fixes a link failure in 32-bit Arm thumb mode
because commit 1f9c804fbd699104adefbce9e56d2c8aa711b6b9
("nptl: Use internal low-level lock type for !IS_IN (libc)")
introduced __libc_do_syscall calls outside of libc.
Before x86-64:
text data bss dec hex filename 1937748 20456 54896 2013100 1eb7ac libc.so.6
25601 856 12768 39225 9939 nss/libnss_db.so.2
40310 952 25144 66406 10366 nss/libnss_files.so.2
After x86-64:
text data bss dec hex filename 1935312 20456 54896 2010664 1eae28 libc.so.6
25559 864 12768 39191 9917 nss/libnss_db.so.2
39764 960 25144 65868 1014c nss/libnss_files.so.2
Anton Blanchard [Tue, 6 Jul 2021 10:19:36 +0000 (20:19 +1000)]
powerpc64le: Fix typo in configure
The configure script checks for -mlong-double-128 but mentions -mlongdouble
when it fails. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
5 years ago, commit 8f1b841e452dbb083112fd036033b7f4af506ba0
unintentionally added an ifunc to the loader.
That modification has not caused any harm so far, but it doesn't add any
value either, because the hwcap information is available later during
libc initialization.
Added wcsnlen-sse4.1 to the wcslen ifunc implementation list and did
not add wcslen-sse4.1 to wcslen ifunc implementation list. This commit
fixes that by removing wcsnlen-sse4.1 from the wcslen ifunc
implementation list and adding wcslen-sse4.1 to the ifunc
implementation list.
Testing:
test-wcslen.c, test-rsi-wcslen.c, and test-rsi-strlen.c are passing as
well as all other tests in wcsmbs and string.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
added wcsnlen-sse4.1 to the wcslen ifunc implementation list. Since the
random value in the the RSI register is larger than the wide-character
string length in the existing wcslen test, it didn't trigger the wcslen
test failure. Add a test to force 0 into the RSI register before calling
wcslen.
Fangrui Song [Thu, 8 Jul 2021 21:26:22 +0000 (14:26 -0700)]
x86_64: Remove unneeded static PIE check for undefined weak diagnostic
https://sourceware.org/bugzilla/show_bug.cgi?id=21782 dropped an ld
diagnostic for R_X86_64_PC32 referencing an undefined weak symbol in
-pie links. Arguably keeping the diagnostic like other ports is more
correct, since statically resolving movl foo(%rip), %eax to the
link-time zero address produces a corrupted output.
It turns out that --enable-static-pie builds do not depend on the ld
behavior. GCC generates GOT indirection for weak declarations for
-fPIE/-fPIC, so what ld does with the PC-relative relocation doesn't
really matter.
This patch adds a way to close a range of file descriptors on
posix_spawn as a new file action. The API is similar to the one
provided by Solaris 11 [1], where the file action causes the all open
file descriptors greater than or equal to input on to be closed when
the new process is spawned.
The function posix_spawn_file_actions_addclosefrom_np is safe to be
implemented by iterating over /proc/self/fd, since the Linux spawni.c
helper process does not use CLONE_FILES, so its has own file descriptor
table and any failure (in /proc operation) aborts the process creation
and returns an error to the caller.
I am aware that this file action might be redundant to the current
approach of POSIX in promoting O_CLOEXEC in more interfaces. However
O_CLOEXEC is still not the default and for some specific usages, the
caller needs to close all possible file descriptors to avoid them
leaking. Some examples are CPython (discussed in BZ#10353) and OpenJDK
jspawnhelper [2] (where OpenJDK spawns a helper process to exactly
closes all file descriptors). Most likely any environment which calls
functions that might open file descriptor under the hood and aim to use
posix_spawn might face the same requirement.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
The function closes all open file descriptors greater than or equal to
input argument. Negative values are clamped to 0, i.e, it will close
all file descriptors.
As indicated by the bug report, this is a common symbol provided by
different systems (Solaris, OpenBSD, NetBSD, FreeBSD) and, although
its has inherent issues with not taking in consideration internal libc
file descriptors (such as syslog), this is also a common feature used
in multiple projects [1][2][3][4][5].
The Linux fallback implementation iterates over /proc and close all
file descriptors sequentially. Although it was raised the questioning
whether getdents on /proc/self/fd might return disjointed entries
when file descriptor are closed; it does not seems the case on my
testing on multiple kernel (v4.18, v5.4, v5.9) and the same strategy
is used on different projects [1][2][3][5].
Also, the interface is set a fail-safe meaning that a failure in the
fallback results in a process abort.
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
It was added on Linux 5.9 (278a5fbaed89) with CLOSE_RANGE_CLOEXEC
added on 5.11 (582f1fb6b721f). Although FreeBSD has added the same
syscall, this only adds the symbol on Linux ports. This syscall is
required to provided a fail-safe way to implement the closefrom
symbol (BZ #10353).
Checked on x86_64-linux-gnu and i686-linux-gnu on kernel 5.11 and 4.15.
The code to allocate a stack from xsigstack is refactored so it can
be more generic. The new support_stack_alloc() also set PROT_EXEC
if DEFAULT_STACK_PERMS has PF_X. This is required on some
architectures (hppa for instance) and trying to access the rtld
global from testsuite will require more intrusive refactoring
in the ldsodefs.h header.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also ran
tst-xsigstack on both hppa and ia64.
_int_realloc is correctly declared at the top to be static, but
incorrectly defined without the static keyword. Fix that. The
generated binaries have identical code.
The tcache allocator layer uses the tcache pointer as a key to
identify a block that may be freed twice. Since this is in the
application data area, an attacker exploiting a use-after-free could
potentially get access to the entire tcache structure through this
key. A detailed write-up was provided by Awarau here:
Replace this static pointer use for key checking with one that is
generated at malloc initialization. The first attempt is through
getrandom with a fallback to random_bits(), which is a simple
pseudo-random number generator based on the clock. The fallback ought
to be sufficient since the goal of the randomness is only to make the
key arbitrary enough that it is very unlikely to collide with user
data.
This partially fixes static-only NSS support (bug 27959): The files
module no longer needs dlopen. Support for the dns module remains
to be added, and also support for disabling dlopen altogether.
nss_files: Add generic code for set*ent, end*ent and file open
This reduces RSS usage if nss_files is not actually used, and can
be used later to make NSS data thread-specific. It also results in
a small code size reduction.
nss_files: Allocate nscd file registration data on the heap
This is only needed if nss_files is loaded by nscd.
Before:
text data bss dec hex filename
767 0 24952 25719 6477 nss/files-init.os
After:
text data bss dec hex filename
666 0 0 666 29a nss/files-init.os
Using PATH_MAX bytes unconditionally for the directory name
is wasteful, but fixing that would constitute another break
of this semi-public ABI. (The other issue is that with
symbolic links, an arbitrary set of parent directories may need
watching, not just a single one.)
1. Add __extendhfdf2/__extendhfsf2 to return an IEEE half converted to IEEE double/single.
2. Add __truncdfhf2/__extendsfhf2 to truncate IEEE double/single into IEEE half.
3. Add __eqhf2/__nehf2 to return 0 if a == b and a,b are not NAN, otherwise return 1.
Joseph Myers [Wed, 7 Jul 2021 13:24:05 +0000 (13:24 +0000)]
Update kernel version to 5.13 in tst-mman-consts.py
This patch updates the kernel version in the test tst-mman-consts.py
to 5.13. (There are no new MAP_* constants covered by this test in
5.13 that need any other header changes.)
elf: Clean up GLIBC_PRIVATE exports of internal libdl symbols
They are no longer needed after everything has been moved into
libc. The _dl_vsym test has to be removed because the symbol
cannot be used outside libc anymore.
nptl: Use internal low-level lock type for !IS_IN (libc)
This avoids an ABI hazard (types changing between different modules
of glibc) without introducing linknamespace issues. In particular,
NSS modules now call __lll_lock_wait_private@@GLIBC_PRIVATE to wait
on internal locks (the unlock path is inlined and performs a direct
system call).
The realloc (NULL, 0) test in tst-realloc fails with gcc 7.x but
passes with newer gcc. This is because a newer gcc transforms the
realloc call to malloc (0), thus masking the bug in mcheck.
Disable the test with mcheck for now. The malloc removal patchset
will fix this and then remove this test from the exclusion list.
Reported-by: Stefan Liebler <stli@linux.ibm.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
linux: Consolidate Linux setsockopt implementation
This patch consolidates the setsockopt implementation on
sysdeps/unix/sysv/linux/getsockopt.c. The changes are:
1. Remove it from auto-generation syscalls.list on all architectures.
2. Add __ASSUME_SETSOCKOPT_SYSCALL as default and undef if for
specific kernel versions on some architectures.
This also fix a potential issue where 32-bit time_t ABI should use the
linux setsockopt which overrides the underlying SO_* constants used for
socket timestamping for _TIME_BITS=64.
linux: Consolidate Linux getsockopt implementation
This patch consolidates the getsockopt Linux syscall implementation on
sysdeps/unix/sysv/linux/getsockopt.c. The changes are:
1. Remove it from auto-generation syscalls.list on all architectures.
2. Add __ASSUME_GETSOCKOPT_SYSCALL as default and undef if for
specific kernel versions on some architectures.
This also fix a potential issue where 32-bit time_t ABI should use the
linux getsockopt which overrides the underlying SO_* constants used for
socket timestamping for _TIME_BITS=64.
elf: Call free from base namespace on error in dl-libc.c [BZ #27646]
In dlerror_run, free corresponds to the local malloc in the
namespace, but GLRO (dl_catch_error) uses the malloc from the base
namespace. elf/tst-dlmopen-gethostbyname triggers this mismatch,
but it does not crash, presumably because of a fastbin deallocation.
The variable and function pair appear to provide a way for users to
set conditional breakpoints in mtrace when a specific address is
returned by the allocator. This can be achieved by using conditional
breakpoints in gdb so it is redundant. There is no documentation of
this interface in the manual either, so it appears to have been a hack
that got added to debug malloc. Deprecate these symbols and do not
call tr_break anymore.
Reviewed-by: DJ Delorie <dj@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
malloc: Initiate tcache shutdown even without allocations [BZ #28028]
After commit 1e26d35193efbb29239c710a4c46a64708643320 ("malloc: Fix
tcache leak after thread destruction [BZ #22111]"),
tcache_shutting_down is still not early enough. When we detach a
thread with no tcache allocated, tcache_shutting_down would still be
false.
Like malloc-check, add generic rules to run all tests in malloc by
linking with libmcheck.a so as to provide coverage for mcheck().
Currently the following 12 tests fail:
and they have been added to tests-exclude-mcheck for now to keep
status quo. At least the last two can be attributed to bugs in
mcheck() but I haven't fixed them here since they should be fixed by
removing malloc hooks. Others need to be triaged to check if they're
due to mcheck bugs or due to actual bugs.
Build of iconvconfig failed with CFLAGS=-Os since __feof_unlocked is
not a public symbol. Replace with feof_unlocked (defined to
__feof_unlocked when IS_IN (libc)) to fix this.
Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
resolv: Move libanl into libc (if libpthread is in libc)
The symbols gai_cancel, gai_error, gai_suspend, getaddrinfo_a,
__gai_suspend_time64 were moved using scripts/move-symbol-to-libc.py.
For Hurd (which remains !PTHREAD_IN_LIBC), a few #define redirects
had to be added because several pthread functions are not available
under __. (Linux uses __ prefixes for most hidden aliases, and has
to in some cases to avoid linknamespace issues.)
This patch modifies the current POWER9 implementation of strcpy and
stpcpy to optimize it for POWER9/10.
Since no new POWER10 instructions are used, the original POWER9 strcpy is
modified instead of creating a new implementation for POWER10. This
implementation is based on both the original POWER9 implementation of
strcpy and the preamble of the new POWER10 implementation of strlen.
The changes also affect stpcpy, which uses the same implementation with
some additional code before returning.
On POWER9, averaging improvements across the benchmark
inputs (length/source alignment/destination alignment), for an
experiment that ran the benchmark five times, bench-strcpy showed an
improvement of 5.23%, and bench-stpcpy showed an improvement of 6.59%.
On POWER10, bench-strcpy showed 13.16%, and bench-stpcpy showed 13.59%.
The changes are:
1. Removed the null string optimization.
Although this results in a few extra cycles for the null string, in
combination with the second change, this resulted in improvements for
for other cases.
2. Adapted the preamble from strlen for POWER10.
This is the part of the function that handles up to the first 16 bytes
of the string.
3. Increased number of unrolled iterations in the main loop to 6.
* Intel TSX will be disabled by default.
* The processor will force abort all Restricted Transactional Memory (RTM)
transactions by default.
* A new CPUID bit CPUID.07H.0H.EDX[11](RTM_ALWAYS_ABORT) will be enumerated,
which is set to indicate to updated software that the loaded microcode is
forcing RTM abort.
* On processors that enumerate support for RTM, the CPUID enumeration bits
for Intel TSX (CPUID.07H.0H.EBX[11] and CPUID.07H.0H.EBX[4]) continue to
be set by default after microcode update.
* Workloads that were benefited from Intel TSX might experience a change
in performance.
* System software may use a new bit in Model-Specific Register (MSR) 0x10F
TSX_FORCE_ABORT[TSX_CPUID_CLEAR] functionality to clear the Hardware Lock
Elision (HLE) and RTM bits to indicate to software that Intel TSX is
disabled.
1. Add RTM_ALWAYS_ABORT to CPUID features.
2. Set RTM usable only if RTM_ALWAYS_ABORT isn't set. This skips the
string/tst-memchr-rtm etc. testcases on the affected processors, which
always fail after a microcde update.
3. Check RTM feature, instead of usability, against /proc/cpuinfo.
Joseph Myers [Thu, 1 Jul 2021 17:37:36 +0000 (17:37 +0000)]
Update syscall lists for Linux 5.13
Linux 5.13 has three new syscalls (landlock_create_ruleset,
landlock_add_rule, landlock_restrict_self). Update syscall-names.list
and regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Stefan Liebler [Tue, 29 Jun 2021 09:37:28 +0000 (11:37 +0200)]
s390: Fix MEMCHR_Z900_G5 ifunc-variant if n>=0x80000000 [BZ #28024]
On s390 (31bit), the pointer to the first byte after s always wraps
around with n >= 0x80000000 and can lead to stop searching before
end of s.
Thus this patch just use NULL as byte after s in this case and
the srst instruction stops searching with "not found" when wrapping
around from top address to zero.
This is observable with testcase string/test-memchr
starting with commit "String: Add overflow tests for strnlen, memchr,
and strncat [BZ #27974]"
https://sourceware.org/git/?p=glibc.git;a=commit;h=da5a6fba0febbfc90896ce1b2eb75c6d8a88a72d
Stefan Liebler [Wed, 30 Jun 2021 14:17:37 +0000 (16:17 +0200)]
Fix extra PLT reference in libc.so due to __glob64_time64 if build with gcc 7.5 on 32bit.
Starting with recent commit 84f7ce84474c1648ce96884f1c91ca7b97ca3fc2
"posix: Add glob64 with 64-bit time_t support", elf/check-localplt
fails due to extra PLT reference __glob64_time64 in __glob64_time64
itself.
This is observable with gcc 7.5 on x86_64 with -m32 or s390x with
-m31. E.g. if build with gcc 10, gcc is generating a call to
__glob64_time64.localalias.
This patch is adding a hidden version of __glob64_time64 in the
same way as for __globfree64_time64.
Add hp-timing.h using the cntvct_el0 counter. Return timing in nanoseconds
so it is fully compatible with generic hp-timing. Don't set HP_TIMING_INLINE
in the dynamic linker since it adds unnecessary overheads and some ancient
kernels may not handle emulating cntcvt correctly. Currently cntvct_el0 is
only used for timing in the benchtests.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimize strnlen by avoiding UMINV which is slow on most cores. On Neoverse N1
large strings are 1.8x faster than the current version, and bench-strnlen is
50% faster overall. This version is MTE compatible.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Florian Weimer [Tue, 29 Jun 2021 20:17:05 +0000 (22:17 +0200)]
nptl_db: Re-use the ELF-to-abilist converter for ABI checking
The previous approach uses readelf -DWs, which does not produce
a stable output format (older binutils versions do not include
symbol version information). This commit re-uses scripts/abilist.awk
with a tweak to include GLIBC_PRIVATE symbols. This awk script
is based on objdump -T output, which appears to be stable over time.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
RFC 8335 defines the network utility PROBE, which builds off of the
capabilities of Ping to query more detailed interface information from
networking nodes.
The definitions included in this patchset have been accepted into the
linux net-next branch and will be included in Linux 5.13. This
patchset adds the same definitions to the glibc for use in the
iputils package.
Stefan Liebler [Mon, 28 Jun 2021 11:01:07 +0000 (13:01 +0200)]
s390x: Update math: redirect roundeven function
After recent commit 447954a206837b5f153869cfeeeab44631c3fac9
"math: redirect roundeven function", building on
s390x fails with:
Error: symbol `__roundevenl' is already defined
Similar to aarch64/riscv fix, this patch redirects target
specific functions for s390x:
commit 3213ed770cbc5821920d16caa93c85e92dd7b9f6
"Update math: redirect roundeven function"
Austin Group issue 62 [1] dropped the async-signal-safe requirement
for fork and provided a async-signal-safe _Fork replacement that
does not run the atfork handlers. It will be included in the next
POSIX standard.
It allow to close a long standing issue to make fork AS-safe (BZ#4737).
As indicated on the bug, besides the internal lock for the atfork
handlers itself; there is no guarantee that the handlers itself will
not introduce more AS-safe issues.
The idea is synchronize fork with the required internal locks to allow
children in multithread processes to use mostly of standard function
(even though POSIX states only AS-safe function should be used). On
signal handles, _Fork should be used intead and only AS-safe functions
should be used.
For testing, the new tst-_Fork only check basic usage. I also added
a new tst-mallocfork3 which uses the same strategy to check for
deadlock of tst-mallocfork2 but using threads instead of subprocesses
(and it does deadlock if it replaces _Fork with fork).
Florian Weimer [Mon, 28 Jun 2021 12:33:53 +0000 (14:33 +0200)]
nptl_db: Clean up main/rtld variable handling
Most symbols are now in libc.so.6. The "main" (exempted from
coverage checks) status is therefore not necessary. Use
DB_MAIN_VARIABLE for the remaining separate symbol,
__nptl_initial_report_events. DB_RTLD_VARIABLE is now unused, so
remove it.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Mon, 28 Jun 2021 07:51:01 +0000 (09:51 +0200)]
Linux: Cleanups after librt move
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Florian Weimer [Mon, 28 Jun 2021 07:51:01 +0000 (09:51 +0200)]
Linux: Move timer_settime, __timer_settime64 from librt to libc
The symbols were moved using scripts/move-symbol-to-libc.py.
The way the ABI intransition is implemented is changed with this
commit: the implementation is now consolidated in one file with a
TIMER_T_WAS_INT_COMPAT check.
The shared librt is now empty, so this commit adds a placeholder
symbol at the base version, GLIBC_2.2, and potentially at the
GLIBC_2.3.3 version as well (the leftover from the int/timer_t ABI
transition).
Florian Weimer [Mon, 28 Jun 2021 07:51:01 +0000 (09:51 +0200)]
Linux: Move timer_gettime, __timer_gettime64 from librt to libc
The symbols were moved using scripts/move-symbol-to-libc.py.
The way the ABI intransition is implemented is changed with this
commit: the implementation is now consolidated in one file with a
TIMER_T_WAS_INT_COMPAT check.
Florian Weimer [Mon, 28 Jun 2021 07:51:00 +0000 (09:51 +0200)]
Linux: Move timer_getoverrun from librt to libc
The symbol was moved using scripts/move-symbol-to-libc.py.
The way the ABI intransition is implemented is changed with this
commit: the implementation is now consolidated in one file with a
TIMER_T_WAS_INT_COMPAT check.
Florian Weimer [Mon, 28 Jun 2021 07:51:00 +0000 (09:51 +0200)]
Linux: Move timer_create, timer_delete from librt to libc
The symbols were moved using scripts/move-symbol-to-libc.py.
timer_create and timer_delete are tied together via the int/timer_t
compatibility code. The way the ABI intransition is implemented
is changed with this commit: the implementation is now consolidated
in one file with a TIMER_T_WAS_INT_COMPAT check.
Florian Weimer [Mon, 28 Jun 2021 07:51:00 +0000 (09:51 +0200)]
Linux: Define TIMER_T_WAS_INT_COMPAT in kernel-posix-timers.h
This is almost equivalent to __WORDSIZE == 64
&& OTHER_SHLIB_COMPAT (librt, GLIBC_2_1, GLIBC_2_3_3), except
that this expression is true for mips64/n64 targets as well,
even though those did not undergo the timer_t transition.
Florian Weimer [Mon, 28 Jun 2021 06:33:57 +0000 (08:33 +0200)]
Install shared objects under their ABI names
Previously, the installed objects were named like libc-2.33.so,
and the ABI soname libc.so.6 was just a symbolic link.
The Makefile targets to install these symbolic links are no longer
needed after this, so they are removed with this commit. The more
general $(make-link) command (which invokes scripts/rellns-sh) is
retained because other symbolic links are still needed.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@rehdat.com>
Florian Weimer [Mon, 28 Jun 2021 06:33:57 +0000 (08:33 +0200)]
elf: Generalize name-based DSO recognition in ldconfig
This introduces <dl-is_dso.h> and the _dl_is_dso function. A
test ensures that the official names of libc.so, ld.so, and their
versioned names are recognized.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
This is only seen on installed systems because it was due to a
corrupted gconv-modules.cache. iconvconfig had the following issues
(it was specifically freeing fulldir that caused this issue, but other
cleanups are also needed) that this patch fixes.
- Add prefix only if dir starts with '/'
- Use asprintf instead of mempcpy so that the directory string is NULL
terminated
- Make a copy of the directory reference in new_module so that fulldir
can be freed within the same scope in handle_dir.
Shen-Ta Hsieh [Mon, 24 May 2021 01:43:12 +0000 (09:43 +0800)]
Use GCC builtins for roundeven functions if desired.
This patch is using the corresponding GCC builtin for roundevenf,
roundeven and roundevenl if the USE_FUNCTION_BUILTIN macros are defined
to one in math-use-builtins.h.
These builtin functions is supported since GCC 10.
The code of the generic implementation is not changed.
Signed-off-by: Shen-Ta Hsieh <ibmibmibm.tw@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Florian Weimer [Fri, 25 Jun 2021 08:51:31 +0000 (10:51 +0200)]
Linux: Move timer helper routines from librt to libc
This adds several temporary GLIBC_PRIVATE exports. The symbol names
are changed so that they all start with __timer_.
It is now possible to invoke the fork handler directly, so
pthread_atfork is no longer necessary. The associated error cannot
happen anymore, and cancellation handling can be removed from
the helper thread routine.
git://sourceware.org / glibc.git / log