2005-09-25 Joshua Daniel Franklin <joshuadfranklin@yahoo.com>
* faq.xml: Remove copyright section, link to license.html
* faq-sections.xml: Remove copyright section, link to license.html
* faq-programming.xml: Remove confusing reference to Red Hat.
* faq-what.xml: Reword "supported" FAQ.
Semi-reversion of always-exit-from-sigthread change of 2005-09-15.
* exceptions.cc (sigpacket::process): Eliminate return after call to reinstated
noreturn function.
(signal_exit): Allow function to exit when a captive process has been
terminated.
* pinfo.cc (pinfo::exit): Enter exit_lock here. Once again exit here under
control of exit_lock.
* sigproc.cc (sig_send): Don't wait for completion if process is exiting.
Remove special __SIGEXIT accommodations.
(wait_sig): Just exit the thread when a __SIGEXIT has been detected. Don't
exit the process.
* cygtls.h (struct _cygtls::thread_handle): Remove/revert.
* sigproc.h (struct sipacket::thread_handle): Put thread_handle here.
* sigproc.cc (sigproc_terminate): Move setting of thread_handle...
(sig_send): ...to here. Put it in packet being sent. Only close pack.wakeup
when we're waiting for completion.
(wait_sig): Use thread_handle directly from received packet.
* cygheap.cc (cygheap_fixup_in_child): It's not just for exec.
* cygtls.h (struct _cygtls::thread_handle): New field.
* dcrt0.cc (exit_lock): Remove declaration.
* winsup.h (exit_lock): Add declaration.
* exceptions.cc (sigpacket::process): Properly return after signal_exit.
* pinfo.cc (pinfo::exit): Only exit the process if _my_tls.thread_handle has
not been filled out -- which should be an impossible event.
* sigproc.cc (sigproc_terminate): Fillout _my_tls.thread_handle to provide
something for wait_sig to wait for. Use the siginfo_t version of sig_send and
fill out the tls argument with _my_tls.
(wait_sig): Wait for the thread specified in pack.tls or (for now) complain
bitterly if it doesn't exit.
* pinfo.cc (set_myself): Call strace.hello unconditionally when DEBUGGING.
(pinfo::init): Sleep and issue debugging output before looping when a
PID_EXITED is found.
* fhandler.h (fhandler_base::fstat_helper): Declare with additional
file attributes argument.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Use
file attributes evaluated from NtQueryFileInformation or
FileInformationByHandle in call to fstat_helper.
Set pc.fileattr from just evaluated file attributes here.
(fhandler_base::fstat_by_name): Use file attributes evaluated from
FindFileFirst or default attribute in call to fstat_helper.
Set pc.fileattr from just evaluated file attributes here.
(fhandler_base::fstat_helper): Use file attributes given as argument,
not file attributes stored in this fhandler, since this information
is potentially wrong. Add comment to explain this.
* path.h (has_attribute): New global inline function.
(path_conv::set_attributes): New method to change fileattr.
Align error message handling to mkpasswd's error messages throughout.
* mkgroup.c (print_win_error): Create macro calling ...
(_print_win_error): ... this function created from former
print_win_error. Move up in source.
(PDOMAIN_CONTROLLER_INFOW): Define return type of DcGetDcNameW.
(dsgetdcname): New function pointer for DcGetDcNameW.
(load_netapi): Get DcGetDcNameW address.
(main): If DcGetDcNameW is available, use it.
* mkpasswd.c (PDOMAIN_CONTROLLER_INFOW): Define return type of
DcGetDcNameW.
(dsgetdcname): New function pointer for DcGetDcNameW.
(load_netapi): Get DcGetDcNameW address.
(main): If DcGetDcNameW is available, use it. Rename local variable
domain_name_specified to domain_specified as in mkgroup.c.
* cygthread.cc (cygthread::operator new): Just use getenv() to look for
CYGWIN_FREERANGE_NOCHECK since the Windows environment may be truncated by
being previously execed.
Jeff Johnston [Tue, 20 Sep 2005 21:21:51 +0000 (21:21 +0000)]
2005-09-20 Jeff Johnston <jjohnstn@redhat.com>
* libc/include/stdint.h (__EXP): Rename to __STDINT_EXP
and do not #undef the macro after it is used. Fix typos.
Also change 64-bit constants to use the __have_long64 and
__have_longlong64 flags to determine if long or long long
constants should be used.
* libc/include/inttypes.h: Include stddef.h to get wchar_t
type defined.
* dcrt0.cc (do_exit): Only call sigproc_terminate from one location --
pinfo::exit.
* pinfo.cc (pinfo::exit): Move sigproc_terminate later so that signals can be
processed while waiting for hExeced child.
(pinfo::maybe_set_exit_code_from_windows): Set exit code from sigExeced if it
is non-zero. Set exit_state to ES_EXEC_EXIT prior to waiting for captive
process exit code.
* exceptions.cc (sigExeced): New global variable.
(signal_exit): Remove noreturn attribute from declaration.
(signal_exit): Just terminate captive process and return if hExeced on the
theory that the exit will be subsequently handled in the main thread.
* sigproc.cc (sigproc_terminate): Eliminate test for ES_SIGPROCTERMINATE and
use ES_FINAL instead.
(sig_send): Use no_signals_available instead of duplicate test.
* winsup.h (ES_EXEC_EXIT): New enum.
(ES_SIGPROCTERMINATE): Delete.
* sigproc.cc (talktome): Take siginfo_t argument. Don't scan all pids trying
to find one that's talking to me. Just use the pid from siginfo_t.
(wait_pid): Pass siginfo_t argument to talktome.
* net.cc (cygwin_inet_ntop): Change len argument to socklen_t to
follow SUSv3.
* include/arpa/inet.h (inet_ntop): Ditto.
* include/cygwin/in.h: Include cygwin/socket.h to get socklen_t.
* environ.cc (build_env): Use "kilo"bytes not "mega"bytes. Return immediately
on error.
* spawn.cc (spawn_guts): Set return value to -1 on error from build_env.
* environ.cc (build_env): Clear envblock and return NULL on attempt to use env
var > 32K.
* spawn.cc (spawn_guts): Set E2BIG if build_env detects an error.
* environ.cc (environ_init): Protect with a 'myfault' in case
GetEnvironmentStrings misbehaves.
* environ.cc (environ_init): Add debugging output with value returned from
GetEnvironmentStrings.
* pinfo.h (EXITCODE_SET): Move out of range of Windows error.
(EXITCODE_NOSET): Ditto.
* sigproc.cc (no_signals_available): Remove check for hwait_sig. Just rely on
my_sendsig. Pass in an argument controlling when it is appropriate to test
EXITCODE_SET.
(proc_can_be_signalled): Remove checks for myself since this function is never
called in that context.
(sigproc_init): Pre-initialize my_sendsig to non-zero so that
proc_can_be_signalled will know that we expect to be signalable soon.
(sig_send): Change debugging output.
* sigproc.cc (no_signals_available): Return true if sending to self from the
signal thread.
(wait_sig): Correct so that WaitForSingleObject is called when hMainThread is
!= 0, rather than the reverse.
* cygheap.cc (cygheap_fixup_in_child): Clarify potential error message.
* fork.cc (fork_copy): Cosmetic change.
* sigproc.cc (wait_sig): Reorganize exit case so that ExitProcess is always
called, since that is the intent of sending a __SIGEXIT. Wait forever for main
thread to go away since, presumably, the main thread told us it was going away.
* hookapi.cc (hook_or_detect_cygwin): Simplify very slightly.
* spawn.cc (av::fixup): Guard against problems reading an executable which does
not match Microsoft's documentation about PE format.
* spawn.cc (av::error): Eliminate.
(av::av): Remove reference to error.
(av::replace0_maybe): Ditto.
(av::dup_maybe): Ditto.
(av::dup_all): Ditto.
(av::unshift): Ditto.
(spawn_guts): On a fault, return E2BIG only if ENOMEM has been set. Otherwise
return EFAULT.
* cygtls.h (san): New structure.
(cygtls::andreas): New element. Replaces _myfault and _myfault_errno.
(cygtls::fault_guarded): Use andreas.
(cygtls::return_from_fault): Ditto.
(cygtls::setup_fault): Add a parameter denoting where to store old fault
handler, if any and use it to "stack" faults.
(cygtls::reset_fault): Restore fault from parameter.
(myfault::sebastian): New variable.
(myfault::~myfault): Pass sebastian to reset_fault.
(myfault::myfault): Store old fault values in sebastian.
* exceptions.cc (sigtid): Remove declaration.
(handle_exceptions): Use _sig_tls rather than sigtid to determine if this is
the signal thread.
(set_signal_mask): Ditto for conditionalized CGF code.
* pinfo.cc (pinfo::exit): Exit the thread if we forcefully terminated the main
thread
* sigproc.cc (sigtid): Delete.
(_sig_tls): Define.
(sig_clear): Use _sig_tls rather than sigtid to determine if this is the signal
thread.
(sig_dispatch_pending): Ditto.
(wait_sig): Set _sig_tls here.
* dcrt0.cc (do_exit): Move sigproc_terminate call later since signal handling
was still needed for subsequent stuff. Call sigproc_terminate with new
exit_state value.
* pinfo.cc (pinfo::exit): Call sigproc_terminate with new exit_state value.
* sigproc.cc (proc_terminate): Remove unnecessary (void) parameter.
(sigproc_terminate): Ditto. Add new argument to accept exit state to be set.
(wait_sig): Reorganize __SIGEXIT handling. Add more debugging output.
* winsup.h (sigproc_terminate): Declare with new exit_state argument.
(exit_states): Reorganize to reflect new exit ordering of sigproc_terminate.
* dcrt0.cc (do_exit): Rely on sigproc_terminate to set exit_state
appropriately.
* pinfo.cc (pinfo::exit): Always call sigproc_terminate here. Rely on
sigproc_terminate to signal signal thread to handle eventual process exit.
* sigproc.cc (no_signals_available): Change criteria for determining if this
process can handle signals to itself.
(my_sendsig): New variable. Copy of my sendsig handle.
(proc_can_be_signalled): Don't send signals if exit code is set.
(sigproc_terminate): Use and set exit_state appropriately to determine when to
do anything. Send __SIGEXIT to self to control process exit.
(sig_send): Use my_sendsig for sending signals. Don't call
proc_can_be_signalled for myself since the criteria is now different for
sending signals to myself.
(wait_sig): Copy myself->sendsig to my_sendsig for future use. Exit signal
loop when __SIGEXIT is received. Wait for main thread to exit and use its exit
status to actually exit process.
* sigproc.h (__SIGEXIT): New enum.
* dcrt0.cc (alloc_stack): Eliminate superfluous "return;".
* debug.cc (add_handle): Ditto.
* devices.in (device::parse): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Ditto.
(dtable::vfork_child_fixup): Ditto.
* environ.cc (parse_options): Ditto.
* errno.cc (seterrno_from_win_error): Ditto.
* exceptions.cc (sig_handle_tty_stop): Ditto.
(set_signal_mask): Ditto.
* fhandler.cc (fhandler_base::read): Ditto.
(fhandler_base::operator delete): Ditto.
(fhandler_base::seekdir): Ditto.
(fhandler_base::rewinddir): Ditto.
* fhandler_console.cc (fhandler_console::read): Ditto.
(fhandler_console::fixup_after_exec): Ditto.
* sigproc.cc (sigproc_init): Ditto.
(sigproc_terminate): Ditto.
* cygthread.cc (cygthread::cygthread): Add more info to fatal error.
* fhandler_disk_file.cc (fhandler_disk_file::readdir): Temporarily remove
insertion of /dev into root directory.
* path.cc (path_conv::check): Ditto.
* heap.cc (heap_init): Be slightly more aggressive when trying to allocate
heap. Change fatal error to avoid confusion with cygheap.
* spawn.cc (linebuf::finish): New function.
(linebuf::add): Cosmetic change.
(spawn_guts): Only avoid building windows command line if the program being
executed was actually mounted with -X. Don't return E2BIG if we hit the 32K
size and we're executing a detected cygwin program. Just silently truncate the
windows command line, instead.
* fhandler_serial.cc (fhandler_serial::ioctl): Always return 0 for window size.
* termios.cc (tcgetattr): Clear out baud part of c_cflag since it is always
ignored.
Jeff Johnston [Thu, 8 Sep 2005 22:45:53 +0000 (22:45 +0000)]
2005-09-08 Jeff Johnston <jjohnstn@redhat.com>
* Makefile.am: Add include files under bits sub-directory.
* Makefile.in: Regenerated.
* libc/sys/linux/argp/argp-fs-xinl.c: Set __OPTIMIZE__ to
actual value of 1 to be compatible with newer glibc headers.
* libc/sys/linux/sys/cdefs.h: Fix to be compatible with newer
glibc headers.
* libc/sys/linux/sys/dirent.h: Ditto.
* libc/sys/linux/argp/argp-xinl.c: Ditto.
* libc/sys/linux/dl/dl-runtime.c: Make sure fixup and
profile_fixup routines are marked used so they won't be
optimized away.
* libc/sys/linux/dl/dl-cache.c: Don't use weak_extern macro
to mark functions as weak.
* libc/sys/linux/dl/dl-open.c: Ditto.
* libc/sys/linux/iconv/gconv_open.c: Fix to obey new gcc4
rules about lvalues.
* libc/sys/linux/iconv/gconv_simple.c: Ditto.
* libc/sys/linux/linuxthreads/bits/libc-lock.h: Don't use
weak_extern macro to mark functions as weak. Instead always
use #pragma weak.
* iconvdata/jis0208.h: Fix to work with gcc4.
* libc/sys/linux/dl/dl-load.c: Ditto.
* libc/sys/linux/dl/dl-reloc.c: Ditto.
* libc/sys/linux/dl/do-rel.h: Ditto.
* libc/sys/linux/dl/dynamic-link.h: Ditto.
* libc/sys/linux/include/ltdl.h: Ditto.
* libc/sys/linux/machine/i386/dl-machine.h: Ditto.
* libc/sys/linux/machine/i386/weakalias.h: Ditto.
* libc/sys/linux/net/ns_ntoa.c: Ditto.
* libc/sys/linux/bits/initspin.h: New file.
* libc/sys/linux/bits/libc-lock.h: Ditto.
* libc/sys/linux/bits/pthreadtypes.h: Ditto.
* libc/sys/linux/bits/typesizes.h: Ditto.
* regtool.cc: Extend copyright-years.
(print_version): Ditto.
(cmd_list): Don't depend on terminating '\0' being present on
string-values.
(cmd_get): Don't attempt to read more than present, but keep
extra space for terminating '\0'. Really output REG_BINARY.
Don't leak memory.
(cmd_set): Include trailing '\0' in string's length.
* hookapi.cc (rvadelta): Change argument to DWORD to eliminate a compiler
warning.
* path.h (path_conv::set_cygexec): New function.
* spawn.cc (av::iscygwin): Eliminate.
(av::av): Don't initialize iscygwin.
(spawn_guts): Just use real_path.iscygexec for all tests.
(av::fixup): Short circuit test if .exe extension and known cygexec. Set
cygexec flag appropriately if we find that program uses cygwin1.dll.
* dcrt0.cc (initial_env): Don't attempt stracing if dynamically loaded.
(dll_crt0_0): Move console initialization earlier.
* init.cc (dll_entry): Move console initialization here.
* exceptions.cc (init_console_handler): Fully remove any old console handler.
* spawn.cc (spawn_guts): Don't fill out windows argv if we've deduced that this
is a cygwin-using program.
(av::fixup): Always check executables to see if they are using cygwin1.dll.
Don't consider .com files to be scripts.
* hookapi.cc (rvadelta): New function.
(PEHeaderFromHModule): Simplify slightly.
(hook_or_detect_cygwin): Use passed in name argument for "HMODULE" rather than
incorrectly reading current program. Calculate delta needed to read image data
and file names if this isn't a real "HMODULE".
Ben Elliston [Wed, 7 Sep 2005 00:42:19 +0000 (00:42 +0000)]
Import from Autoconf sources:
2005-09-06 Paul Eggert <eggert@cs.ucla.edu>
* move-if-change: Don't output "$2 is unchanged"; suggested by Ben
Elliston. Handle weird characters correctly.
* cygheap.cc (cygheap_init): Eliminate debugging #if.
* fork.cc (fork_parent): Don't issue errors if "somebody" has set the
PID_EXITED flag on a child. Don't close process handle if it has potentially
already been closed.
* pinfo.cc (winpids::add): Eliminate PID_ALLPIDS handling which was obsoleted
by previous changes.
* spawn.cc (av::fixup): Do win16 detection for .com files. Make sure that
buffer has been unmapped in all cases.
Jeff Johnston [Wed, 31 Aug 2005 20:39:43 +0000 (20:39 +0000)]
2005-08-31 Paul Brook <paul@codesourcery.com>
* configure.host: Set have_crt0 to no for Arm targts when not
providing syscalls. Set sys_dir=arm unconditionally.
Default have_crt0 based on sys_dir.
* configure.in: Use have_crt0.
* libc/configure.in: Ditto.
* libc/sys/configure.in: Ditto.
* configure: Regenerate.
* libc/configure: Regenerate.
* libc/sys/configure: Regenerate.
* libc/sys/arm/Makefile.am (lib_a_SOURCES): Add aeabi_atexit.c.
Only build other files when providing syscalls.
* libc/sys/arm/Makefile.in: Regenerate.
* libc/sys/arm/aeabi_atexit.c: New file.
* cygtls.h (__ljfault): Declare.
(_cygtls::return_from_fault): Use __ljfault.
* exceptions.cc (set_signal_mask): Revert previous checkin.
* gendef (__sjfault): Split out into a separate function which doesn't bother
with any special signal locking. routines.
(_ljfault): Return from a __sjfault without bothering with signals.