Corinna Vinschen [Thu, 23 Jun 2016 14:56:41 +0000 (16:56 +0200)]
Handle up to 63 partitions per drive
Revamp device parsing code. Introducing support for more partitions
into the shilka-generated parser has the unfortunate side-effect of
raising the size of the DLL by almost 2 Megs. Therefore we split out
the handling for /dev/sdXY devices into a tiny bit of hand-written
code.
While at it, remove some unused cruft from devices.* and generally
clean up the device class to provide access methods instead of direct
access to members.
Corinna Vinschen [Tue, 21 Jun 2016 11:39:04 +0000 (13:39 +0200)]
Use correct file info (especially inode number) for newly created files
fhandler_base::open_fs has two problems:
- When newly creating a file, the file info in the path_conv is
incorrect. It points to info for the parent dir, not to info
for the file itself (which, naturally, wasn't available before).
- Fetching the file's inode number only worked for non-NFS.
Both problems should be fixed now by reloading file info if the file
has just been created, as well as using the new FS-agnostic
path_conv::get_ino method.
Corinna Vinschen [Tue, 21 Jun 2016 11:24:41 +0000 (13:24 +0200)]
Improve encapsulation of FS type behind path_conv cover
Rather than having to check for the FS type in the caller and having
to call different functions whether FS is NFS or not, encapsulate the
info in path_conv_handle/path_conv methods to allow FS type agnostic
calling from upper level functions.
Commit a23e6a35d896a075640db714b28ce74bb6b8d7ff introduced a timer
object to the WFMO handling in select_stuff::wait to allow sub-tickcount
timeout values in select.
Problems with this patch: The timer was created and destroyed on every
invocation of select_stuff::wait, thus potentially multiple times per
select. Also, since the timer was prepended to the WFMO hande list,
the timer handle could shadow actual events on other objects, given that
WFMO checks the objects in the order they have been specified in the
HANDLE array. The timer was also created/destroyed and added to the
HANDLE array even if it was not required.
This patch drops the local timer HANDLE and recycles the cw_timer HANDLE
in the cygtls area instead. Thus we typically don't need to create the
timer in select at all, and we never have to destroy it.
The timer HANDLE is now also appended as last object to the HANDLE array,
and it's only added if actually needed.
Fix condition in select which results in busy loop.
The check for current timestamp > start timestamp has an unwelcome
side effect: The loop is not left as long as the current timestamp
hasn't been incremented. This leads to busy loops of about one tick
(10 to 16 ms per MSDN).
This fixes https://cygwin.com/ml/cygwin/2016-05/msg00327.html
Takashi Yano [Mon, 6 Jun 2016 13:09:34 +0000 (15:09 +0200)]
Return at most one line of input in canonical mode
'man termios' says:
"A read(2) returns at most one line of input" in canonical mode.
On cygwin 2.5.1, read(2) returns all data in buffer if the buffer
size specified is large enough. This behaviour is correct in
noncanonical mode, but is not correct in canonical mode.
While checking this problem, I found a bug of tcflush(). tcflush()
flushes only partial data in the buffer. The patch also fixes this bug.
The patch has also been tested against the problem reported in
https://cygwin.com/ml/cygwin/2016-05/msg00318.html.
Only regenerate tlsoffsets{64}.h if cygtls.h can be compiled
The rule to make tlsoffset{64}.h has a flaw. If cygtls.h can't be
built for whatever reason, it *still* regenerates tlsoffsets{64}.h,
just with size 0. If the bug is not in cygtls.h itself, this behaviour
breaks further building, because fixing the problem won't result in
regenerating tlsoffset{64}.h. Manual intervention is required.
Fix that by removing tlsoffsets{64}.h if gentls_offsets fails.
Temporarily revert to use PROCESS_QUERY_INFORMATION instead of
PROCESS_QUERY_LIMITED_INFORMATION to make sure every aspect of the
next release is still XP/2003 compatible.
dlopen: Add dot to filename if no slash is present
We're appending a dot to the filename before calling LoadLibrary to
override ".dll" automagic. This only worked for paths, not for simple
filenames since it required a slash in the pathname. Fix that.
Corinna Vinschen [Tue, 31 May 2016 14:33:21 +0000 (16:33 +0200)]
realpath: Handle Win32 and NT long path prefixes
So far drive letter paths have been handled special since path_conv
leaves the incoming path untouched except for converting backslashes
to forward slashes. However, if the incoming path starts with a
long path prefix, the same problem occurs. Therefore handle all
paths starting with a backslahs the same way.
Anton Kolesov [Fri, 13 May 2016 15:21:08 +0000 (18:21 +0300)]
arc: Have nops in _exit_halt only for ARCompact
ARCompact processors (ARC 600 and ARC 700) require three "nop"s after the
"flag 1" instruction. Later ARC processors do not have this requirement, so
it is possible to reduce size of "_exit_halt" for them.
libgloss/
2016-05-24 Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc/crt0.S (_exit_halt): Insert nops only for ARCompact.
Anton Kolesov [Fri, 13 May 2016 15:09:43 +0000 (18:09 +0300)]
arc: Rework default exception handlers for ARC EM and HS
Initially crt0.S used a special function, declared as weak as a default
exception handler in interrupt vector table. To let user override individual
handlers, this function had multiple names - one for each IVT entry, which,
however, was terribly confusing for the debugger and user - because it
wasn't clear which symbol will be used as a function name in debugger.
Defining multiple separate functions - one for each handler, would resolve
the mess, but would increase code size of crt0.o.
To clean this up, this patch defines exception handlers as weak symbols as
well, but those are defined as just symbols, not functions, hence there
would be less confusion over what is what. At the same time, users still can
redefine exception handlers symbol by creating functions with respective
names.
libgloss/
2016-05-24 Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc/crt0.S: Convert memory_error and friends to non-function
symbols.
Corinna Vinschen [Wed, 25 May 2016 10:13:03 +0000 (12:13 +0200)]
TZ: Replace unreliable isupper calls on wchars
In case the TZ variable is empty, Cygwin fetches timezone info from
Windows. Extracting the timezone short name uses isupper on wide chars.
Replace with explicit check for A <= character <= Z to be independent
of undefined behaviour.
Yaakov Selkowitz [Fri, 20 May 2016 21:55:50 +0000 (16:55 -0500)]
Feature test macros: ctermid, cuserid
The proper location for these functions has always been <stdio.h>, however
XPG4 and SUSv2 did mandate a duplicate declaration in <unistd.h>. cuserid
was dropped in SUSv3 (it was marked legacy since XPG4) and the ctermid
declaration in <unistd.h> was made optional and obsolete in SUSv4.
Corinna Vinschen [Fri, 20 May 2016 19:48:10 +0000 (21:48 +0200)]
mmap: Fix size restriction of maps due to using 32 bit size type
Throughout mmap, size-related variables and parameters are still using
DWORD as type, which disallows mapping ranges > 4Gigs. Fix this by
using SIZE_T throughout for those vars and parameters.
Also, drop unused off parameter from 1st variant of mmap_record::map_pages.
Corinna Vinschen [Fri, 20 May 2016 15:45:24 +0000 (17:45 +0200)]
Fix thread priority handling
So far pthread::postcreate() only sets the thread priority at all, only
if the inherit-scheduler attribute is PTHREAD_EXPLICIT_SCHED. This
completely ignores the PTHREAD_INHERIT_SCHED case, since in contrast
to POSIX, a thread does not inherit its priority from the creating
thread, but always starts with THREAD_PRIORITY_NORMAL.
pthread_getschedparam() only returns what's stored in the thread attributes,
not the actual thread priority.
Corinna Vinschen [Fri, 20 May 2016 15:38:22 +0000 (17:38 +0200)]
Rewrite scheduler functions getting and setting process and thread priority
So far the scheduler priority handling is not POSIX compatible.
The priorities use a range of -14 up to +15, which means it's not clear
if the POSIX-required return value of -1 in case of an error is *really*
an error or just the valid priority value -1. Even more confusing, -14
is the *max* value and 15 is the *min* value. Last but not least this
range doesn't match the POSIX requirement of at least 32 priority values.
This patch cleans up scheduler priority handling and moves the valid
priority range to 1 (min) - 32 (max). It also adds a function
sched_get_thread_priority() which will help to make thread priority
more POSIX-like.
John Hood [Wed, 18 May 2016 23:14:17 +0000 (19:14 -0400)]
Improve and simplify select().
* select.h: Eliminate redundant select_stuff::select_loop state.
* select.cc (select): Eliminate redundant
select_stuff::select_loop state. Eliminate redundant code for
zero timeout. Do not return early on early timer return.
(select_stuff::wait): Eliminate redundant
select_stuff::select_loop state.
John Hood [Wed, 18 May 2016 23:14:16 +0000 (19:14 -0400)]
Use high-resolution timebases for select().
* select.h: Change prototype for select_stuff::wait() for larger
microsecond timeouts.
* select.cc (pselect): Convert from old cygwin_select().
Implement microsecond timeouts.
(cygwin_select): Rewrite as a wrapper on pselect().
(select): Implement microsecond timeouts.
(select_stuff::wait): Implement microsecond timeouts with a timer
object.
Anton Kolesov [Tue, 17 May 2016 11:08:32 +0000 (14:08 +0300)]
Sync toplevel configure with upstream GCC.
This fixes a problem, where libgloss wouldn't be built for ARC processors,
even though it is actually supported. The original patch that introduced
support for ARC in libgloss hasn't been submitted to GCC maillist, hence
when top-level configure has been synced with GCC - this libgloss patch has
been effectively reverted.
Libgloss support for ARC has been accepted in GCC:
https://gcc.gnu.org/ml/gcc-patches/2016-05/msg01148.html
ChangeLog
2016-05-17 Anton Kolesov <Anton.Kolesov@synopsys.com>
* configure.ac: Sync with upstream GCC.
* configure: Regenerate.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Wilco Dijkstra [Thu, 12 May 2016 16:16:58 +0000 (16:16 +0000)]
Add rawmemchr
Marcus Shawcroft wrote:
> This patch appears to have been munged by the mail system, can you
> repost as an attachment please.
Sure, I've attached the patch.
Wilco
Add a simple rawmemchr implementation. Use strlen for rawmemchr(s, '\0') as it is the
fastest way to search for '\0', and use memchr with an infinite size for other cases.
This is 3x faster for large sizes.
The reason is that the load order from sys/select.h includes sys/_types.h
before sys/config.h has been included from anywhere else. sys/_types.h
defines _fpos64_t only if __LARGE64_FILES is defined, but it never is in
this scenario. So sys/_types.h has to make sure to get the configuration
info by itself.
Jeff Johnston [Wed, 11 May 2016 21:18:48 +0000 (17:18 -0400)]
Fix strlen using Thumb-2 with -Os -marm
2016-04-18 Thomas Preud'homme <thomas.preudhomme@arm.com>
* libc/machine/arm/strlen-stub.c: Check capabilities of architecture
to decide which Thumb implementation to use and fall back to C
implementation for architecture not supporting Thumb mode.
* libc/machine/arm/strlen.S: Likewise.
Jeff Johnston [Tue, 3 May 2016 18:21:17 +0000 (14:21 -0400)]
Add _Thread_queue_Queue::_owner for RTEMS
Add _Thread_queue_Queue::_owner which will be used for the upcomming
priority inheritance implementation and an O(m) independence-preserving
protocol (OMIP) implementation.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Jeff Johnston [Tue, 3 May 2016 18:17:47 +0000 (14:17 -0400)]
Move _Thread_queue_Queue::_Lock for RTEMS
Move _Thread_queue_Queue::_Lock to begin of the structure. On RTEMS,
the presence of a lock component in the thread queue structures actually
depends on the build-time RTEMS_SMP configuration option. A move of
this part to the begin of the structure allows an implementation re-use
for the other parts.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Jeff Johnston [Mon, 2 May 2016 20:11:26 +0000 (16:11 -0400)]
Always assign return value to passed pointer in time function.
If the passed t pointer is not a null pointer, always assign the return
value to the object it points to, regardless of whether the return value
is an error.
This is what the GNU C Library does, and this is also the expected
behavior according to the latest draft of the C programming language
standard (C11 ISO/IEC 9899:201x WG14 N1570, dated 2011-04-12):
Jeff Johnston [Mon, 2 May 2016 16:04:40 +0000 (12:04 -0400)]
Fix support ARC processors without barrel-shifter
crt0.S for ARC used to use instruction "asr.f lp_count, r3, 2" for all cores
except ARC601. However instructions which shift more than 1 bit are
optional, so this crt0.S didn't worked for all ARC cores.
Luckily this is a shift just by 2 bits on all occassions, so fix is trivial
- use two single-bit shifts.
libgloss/ChangeLog
2016-04-29 Anton Kolesov <anton.kolesov@synopsys.com>
* arc/crt0.S: Fix support for processors without barrel-shifter.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
GCC for ARC has been updated to provide consistent naming of preprocessor
definitions for different optional architecture features:
* __ARC_BARREL_SHIFTER__ instead of __Xbarrel_shifter for
-mbarrel-shifter
* __ARCEM__ instead of __EM__ for ARC EM cores
* __ARCHS__ instead of __HS__ for ARC HS cores
* etc (not used in libgloss)
This patch updates crt0.S for ARC to use new definitions instead of a
deprecated ones. To ensure compatibility with older compiler new definitions
are also defined in crt0.S if needed, based on presence of deprecated
preprocessor definitions.
libgloss/ChangeLog
2016-04-29 Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc/crt0.S: Use new GCC defines to detect processor features.
Sebastian Huber [Thu, 21 Apr 2016 06:21:44 +0000 (08:21 +0200)]
Resurrect <machine/types.h> for <sys/types.h>
Resurrect <machine/_user_types.h> for use in <sys/types.h>. Newlib
targets may provide an own version of <machine/types.h> in their machine
directory to add custom user types for <sys/types.h>. Check the
_SYS_TYPES_H header guard to prevent a direct include of
<machine/types.h>, since the <machine/types.h> file is a Newlib
speciality.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Don't test pthread objects for being already initialized at init time
For all pthread init functions, POSIX says
Results are undefined if pthread_FOO_init() is called specifying an
already initialized pthread_FOO object.
So far our pthread init functions tested the incoming object if it's
already an initialized object and, if so, returned EBUSY. That's ok
*iff* the object was already initialized. However, as the example in
https://cygwin.com/ml/cygwin/2016-04/msg00473.html shows, an uninitialized
pthread object could also accidentally look like an initialized object
and then returning EBUSY is not ok.
Consequentially, all those tests are dangerous. Per POSIX, an application
has to know what its doing when calling any of the pthread init functions
anyway, and re-initializing the object is just as well as undefined
behaviour as is returning EBUSY on already initialized objects.
* thread.cc (pthread_attr_init): Drop check for already initialized
object.
(pthread_condattr_init): Ditto.
(pthread_rwlockattr_init): Ditto.
(pthread_mutexattr_init): Ditto.
Disallow S_ISGID on directories without default ACL entries
We can't handle the S_ISGID bit if the child didn't inherit a NULL SID
ACE with the S_ISGID bit set. On directories without default ACL
entries we would have to add an inheritable NULL SID ACE and nothing else.
This in turn results in permission problems when calling set_file_sd
from set_created_file_access. That's fixable, but it would only work
for files created from Cygwin while files created from native Windows
tools end up with really ugly permissions.
This patch only makes sure that the S_ISGID bit is reset for a directory
if it has no inheritable ACEs. Still having the 's' bit shown in ls or
getfacl output would be misleading. So, calling `setfacl -k' on a dir
also removes the S_ISGID bit now.
* sec_acl.cc (set_posix_access): Drop S_ISGID bit on directories
without inheritable ACEs. Explain why.
So far we tweaked ACL_GROUP_OBJ and ACL_MASK values the same way when
creating a file. We now do what POSIX requires, namely just change
ACL_MASK if it's present, otherwise ACL_GROUP_OBJ. Note that we only
do this at creation time. Chmod still tweaks both to create less
surprising results for the unsuspecting user.
Additionally make sure to take umask only into account if no ACL_MASK
value is present. That has been missed so far.
* sec_acl.cc (set_posix_access): Perform check for non-existant
default ACEs earlier. Ignore umask also if ACL_MASK is present.
Only set owner_eq_group if we're actually handling a user entry.
Mention chmod in a comment.
* security.cc (set_created_file_access): Perform group/mask
permission setting as required by POSIX 1003.1e.
Commit f75114fc was supposed to drop NULL SIDs in case the permissions
are simple enough not to require mask values or special POSIX bits
(S_ISVTX, etc). The check was incorrect. This patch is supposed to
fix the problem.
* sec_acl.cc (set_posix_access): Fix condition under which we
write a NULL SID.
Joel Sherrill [Wed, 13 Apr 2016 20:50:25 +0000 (15:50 -0500)]
libc/sys/rtems/crt0.c: Add <sys/lock.h> symbols required to link autoconf probes
The dummy crt0.c provided by the RTEMS target provides stubs of
symbols which would normally be provided by RTEMS. This patch adds
stubs for posix_memalign() as well as the synchronization methods
prototyped in <sys/lock.h>.
Sebastian Huber [Fri, 15 Apr 2016 11:44:28 +0000 (13:44 +0200)]
Provide __size_t via <sys/_types.h>
Various FreeBSD source and header files need a typedef __size_t via
<sys/_types.h>. Unfortunately the GCC provided <stddef.h> uses
#if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
|| defined(__DragonFly__) \
|| defined(__FreeBSD_kernel__)
/* __size_t is a typedef on FreeBSD 5, must not trash it. */
#elif defined (__VMS__)
/* __size_t is also a typedef on VMS. */
#else
#define __size_t
#endif
and therefore defines __size_t on Newlib targets which would trash a
__size_t typedef. Include <stddef.h> before <sys/_types.h> in
<sys/types.h> and undefine __size_t in <sys/_types.h> as a workaround.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Sebastian Huber [Fri, 15 Apr 2016 11:44:26 +0000 (13:44 +0200)]
Add __va_list to <sys/_types.h>
Add __va_list to <sys/_types.h> for BSD compatibility. In FreeBSD this
typedef is provided by the various architecture-specific
<machine/_types.h> in a copy and paste manner.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
git://sourceware.org / newlib-cygwin.git / log