Cygwin: /proc/sys FS: don't export NFS and DFS as block devices
Network filesystems are not block devices. Apparently this code
hasn't been executed anyway, given how network filesystems are
hidden behind \Device\Mup.
Christian Franke [Sat, 28 Nov 2020 21:09:23 +0000 (22:09 +0100)]
Cygwin: Fix access to block devices below /proc/sys.
Use fhandler_dev_floppy instead of fhandler_procsys for such devices.
The read()/write() functions from fhandler_procsys do not ensure
sector aligned transfers and lseek() fails always.
Signed-off-by: Christian Franke <franke@computer.org>
- If vim is executed in WSL in mintty, some garbage string caused
by "OSC Ps;? BEL/ST" will be shown in some situations. This patch
fixes the issue by removing "OSC Ps;? BEL/ST" from pseudo console
output.
Jon Turney [Wed, 21 Oct 2020 19:41:58 +0000 (20:41 +0100)]
Cygwin: Remove surplus autoconf auxiliary files
Since we are now only configuring once, in winsup, with
AC_CONFIG_AUX_DIR(..), the auxiliary files are taken from the top-level.
(Previously we had a random assorment of AC_CONFIG_AUX_DIR(..) and
AC_CONFIG_AUX_DIR(../..) in winsup subdirectories, so auxiliary files
would be taken from winsup or the top-level.)
Jon Turney [Tue, 6 Oct 2020 15:22:02 +0000 (16:22 +0100)]
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
Jon Turney [Wed, 11 Nov 2020 14:03:58 +0000 (14:03 +0000)]
Cygwin: Drop duplicate C++ flags used to build utils
'-fno-exceptions -fno-rtti' are already present in the compile command
COMPILE.cc set by Makefile.common, so we don't need to add them to
CXXFLAGS as well.
Corinna Vinschen [Tue, 17 Nov 2020 09:50:57 +0000 (10:50 +0100)]
malloc/nano-malloc: correctly check for out-of-bounds allocation reqs
The overflow check in mEMALIGn erroneously checks for INT_MAX,
albeit the input parameter is size_t. Fix this to check for
__SIZE_MAX__ instead. Also, it misses to check the req against
adding the alignment before calling mALLOc.
While at it, add out-of-bounds checks to pvALLOc, nano_memalign,
nano_valloc, and Cygwin's (unused) dlpvalloc.
Jon Turney [Thu, 29 Oct 2020 14:43:32 +0000 (14:43 +0000)]
Cygwin: Ensure temporary directory used by tests exists
By default, libltp tests will create temporary files in a subdirectory
of /tmp, which will (nowadays) be located relative to the test DLL (by
assuming that it is in /bin). This will evaluate to the directory
$target_builddir/winsup/tmp, which doesn't exist.
The location used for these temporary files can be explicitly controlled
by setting the TDIRECTORY env var. Arrange to set that env var to the
/cygdrive path of a tmp subdirectory of the build directory.
Unfortunately, libltp doesn't clean the temporary directory if
TDIRECTORY is set, and some tests assume they are started in a clean
directory, so we need to do that in tcl.
Jon Turney [Wed, 28 Oct 2020 16:14:55 +0000 (16:14 +0000)]
Cygwin: Set PATH for tests to pick up cygwin0.dll
Set the PATH so that tests can pick up cygwin0.dll. Looks like this was
dropped by accident in 2e488e95 ("Don't rely on in-build tools"), so
restore it as it was prior to 9d89f634.
Jon Turney [Wed, 28 Oct 2020 19:11:02 +0000 (19:11 +0000)]
Cygwin: Define target_builddir autoconf and Makefile variables
This is now required as cygwin_build is defined in terms of
target_builddir.
(Note that in other subdirectories, the autoconf variable
target_builddir is AC_SUBST-ed as a side-effect of using a macro from
winsup/acinclude.m4, which is perhaps less than ideal)
Jon Turney [Tue, 27 Oct 2020 15:31:06 +0000 (15:31 +0000)]
Cygwin: Restore setting CC and CXX Makefile variables
b55e3f19 was a bit too aggressive in dropping, rather than just
un-exporting these Makefile variables. We need to set these to the
configured host compiler if we are cross-compiling, otherwise they
default to the build compiler.
Also export CC to the mkvers.sh script (which requires it since 4eca5e6a). It's unclear why we can't just cause windres to use the
build 'cpp' as the pre-processor there.
Ken Brown [Tue, 27 Oct 2020 13:52:48 +0000 (09:52 -0400)]
Cygwin: fix return value of sqrtl on negative infinity
The return value is now -NaN.
This fixes a bug in the mingw-w64 code that was imported into Cygwin.
The fix is consistent with Posix and Linux. It is also consistent
with the current mingw-w64 code, with one exception: The mingw-w64
code sets errno to EDOM if the input is -NaN, but this appears to
differ from Posix and Linux.
Cygwin: pty: Disable ResizePseudoConsole() if stdout is redirected.
- Calling ResizePseudoConsole() generates some escape sequences.
Due to this behaviour, if the output of non-cygwin app is piped
to less, screen is sometimes distorted when the screen is resized.
With this patch, ResizePseudoConsole() is not called if stdout is
redirected.
dougm [Tue, 23 Jun 2020 20:02:55 +0000 (20:02 +0000)]
Define RB_SET_PARENT to do all assignments
to rb parent pointers. Define RB_SWAP_CHILD to replace the child of a parent
with its twin, and use it in 4 places. Use RB_SET in rb_link_node to remove the
only linuxkpi reference to color, and then drop color- and parent-related
definitions that are defined and used only in rbtree.h.
This is intended to be entirely cosmetic, with no impact on program
behavior, and leave RB_PARENT and RB_SET_PARENT as the only ways to
read and write rb parent pointers.
dougm [Sat, 20 Jun 2020 20:25:39 +0000 (20:25 +0000)]
In concluding RB_REMOVE_COLOR, in the case when
the sibling of the root of the too-short tree is black and at least one of the
children of that sibling is red, either one or two rotations finish the
rebalancing. In the case when both of the children are red, the current
implementation uses two rotations where only one is necessary. This change
removes that extra rotation, and in that case also removes a needless
black-to-red-to-black recoloring.
dougm [Sat, 13 Jun 2020 01:54:09 +0000 (01:54 +0000)]
Linuxkpi uses the rb-tree structures
without using their interfaces, making them break when the representation
changes. Revert changes that eliminated the color field from rb-trees, leaving
everything as it was before.
dougm [Tue, 9 Jun 2020 20:19:11 +0000 (20:19 +0000)]
To reduce the size of an rb_node, drop the color
field. Set the least significant bit in the pointer to the node from its parent
to indicate that the node is red. Have the tree rotation macros leave the
old-parent/new-child node red and the new-parent/old-child node black.
This change makes RB_LEFT and RB_RIGHT no longer assignable, and
RB_COLOR no longer defined. Any code that modifies the tree or
examines a node color would have to be modified after this change.
dougm [Sat, 30 May 2020 01:48:12 +0000 (01:48 +0000)]
RB_REMOVE invokes RB_REMOVE_COLOR either when
child is red or child is null. In the first case, RB_REMOVE_COLOR just changes
the child to black and returns. With this change, RB_REMOVE handles that case,
and drops the child argument to RB_REMOVE_COLOR, since that value is always
null.
RB_REMOVE_COLOR is changed to remove a couple of unneeded tests, and
to eliminate some deep indentation.
RB_ISRED is defined to combine a null check with a test for redness,
to replace that combination in several places.
dougm [Thu, 21 May 2020 05:34:02 +0000 (05:34 +0000)]
For the case when RB_REMOVE requires a nontrivial
search to find the node to replace the one being removed, restructure to first
remove the replacement node and correct the parent pointers around it, and then
let the all-cases code at the end deal with the parent of the deleted node,
making it point to the replacement node. This removes one or two conditional
branches.
dougm [Mon, 27 Jan 2020 15:09:13 +0000 (15:09 +0000)]
Correct the use of RB_AUGMENT in the RB_TREE
macros so that is invoked at the root of every subtree that changes in an
insert or delete, and only once, and ordered from the bottom of the tree to the
top. For intel_gas.c, the only user of RB_AUGMENT I can find, change the
augmenting routine so that it does not climb from entry to tree root on every
call, and remove a 'tree correcting' function that can be supplanted by proper
tree augmentation.
amd64: prevent KCSan false positives on LAPIC mapping
For configurations without x2APIC support (guests, older hardware), the global
LAPIC MMIO mapping will trigger false-positive KCSan reports as it will appear
that multiple CPUs are concurrently reading and writing the same address.
This isn't actually true, as the underlying physical access will be performed
on the local CPU's APIC. Additionally, because LAPIC access can happen during
event timer configuration, the resulting KCSan printf can produce a panic due
to attempted recursion on event timer resources.
Add a __nosanitizethread preprocessor define to prevent the compiler from
inserting TSan hooks, and apply it to the x86 LAPIC accessors.
rlibby [Sat, 21 Dec 2019 02:43:20 +0000 (02:43 +0000)]
gcc: quiet Wattribute for no_sanitize("address")
This is an unfortunate instance where the __has_attribute check does
not function usefully. Gcc does have the attribute, but for gcc it only
applies to functions, not variables, and trying to apply it to a
variable generates Wattribute. So far we only apply the attribute to
variables. Only enable the attribute for clang, for now.
Reviewed by: Anton Rang <rang at acm.org>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22875
dab [Tue, 19 Nov 2019 14:46:28 +0000 (14:46 +0000)]
Don't sanitize linker_set
The assumptions of linker_set don't play nicely with
AddressSanitizer. AddressSanitizer adds a 'redzone' of zeros around
globals (including those in named sections), whereas linker_set
assumes they are all packed consecutively like a pointer array. So:
let's annotate linker_set so that AddressSanitizer ignores it.
jhb [Mon, 6 Aug 2018 23:51:08 +0000 (23:51 +0000)]
Make the system C11 atomics headers fully compatible with external GCC.
The <sys/cdefs.h> and <stdatomic.h> headers already included support for
C11 atomics via intrinsincs in modern versions of GCC, but these versions
tried to "hide" atomic variables inside a wrapper structure. This wrapper
is not compatible with GCC's internal <stdatomic.h> header, so that if
GCC's <stdatomic.h> was used together with <sys/cdefs.h>, use of C11
atomics would fail to compile. Fix this by not hiding atomic variables
in a structure for modern versions of GCC. The headers already avoid
using a wrapper structure on clang.
Note that this wrapper was only used if C11 was not enabled (e.g.
via -std=c99), so this also fixes compile failures if a modern version
of GCC was used with -std=c11 but with FreeBSD's <stdatomic.h> instead
of GCC's <stdatomic.h> and this change fixes that case as well.
Reported by: Mark Millard
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D16585
Cygwin: pty: Fix race condition in initialization of pseudo console.
- If output of non-cygwin process is piped to cygwin process, such
as less, the non-cygwin process sometimes fails to start and hangs.
This patch fixes the issue.
Cygwin: AF_INET and AF_LOCAL: recv_internal: fix MSG_WAITALL support
If MSG_WAITALL is set, recv_internal calls WSARecv or WSARecvFrom in a
loop, in an effort to fill all the scatter-gather buffers. The test
for whether all the buffers are full was previously incorrect.
Jon Turney [Sat, 3 Oct 2020 13:41:58 +0000 (14:41 +0100)]
Cygwin: Remove ccwrap
ccwrap massages the compiler's standard include directories to remove
'/usr/include/w32api', with the intent of allowing it to be overriden by
'--with-windows-headers' (See 4c36016b).
I'm not 100% convinced that this is always working as desired, since in
some places w32api includes are done using <w32api/something.h>, which
will find them via the path /usr/include.
If this does turn out to be needed, this could also be implemented by
constructing the appropriate compiler flags once, rather than on every
compiler invocation.
libc/time: Move internal newlib tz-structs into own header
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch moves the internal struct __tzrule_struct to its own
internal header sys/_tz_structs.h. This is included from newlib's
time code as well as from Cygwin's localtime wrapper.
Jon Turney [Mon, 12 Oct 2020 13:27:55 +0000 (14:27 +0100)]
Cygwin: Drop AC_SUBST(LIBSERVER)
The autoconf variable LIBSERVER isn't defined, and it's value isn't
used. (The Makefile.in contains a literal value for the name of this
library instead).
Brian Inglis [Tue, 13 Oct 2020 15:11:08 +0000 (09:11 -0600)]
format_proc_cpuinfo: add enqcmd cpuinfo flag
Add linux-next 5.9 cpuinfo flag for Intel enqcmd/s instructions:
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions:
Work submission instruction comes in two flavors. ENQCMD can be called
both in ring 3 and ring 0 and always uses the contents of a PASID MSR
when shipping the command to the device. ENQCMDS allows a kernel driver
to submit commands on behalf of a user process. The driver supplies the
PASID value in ENQCMDS. There isn't any usage of ENQCMD in the kernel as
of now.
The CPU feature flag is shown as "enqcmd" in /proc/cpuinfo.
Ken Brown [Tue, 29 Sep 2020 20:18:15 +0000 (16:18 -0400)]
Cygwin: always recognize AF_UNIX sockets as reparse points
If __WITH_AF_UNIX is defined when Cygwin is built, then a named
AF_UNIX socket is represented by a reparse point with a
Cygwin-specific tag and GUID. Make such files recognizable as reparse
points (but not as sockets) even if __WITH_AF_UNIX is not defined.
That way utilities such as 'ls' and 'rm' still behave reasonably.
This requires two changes:
- Define the GUID __cygwin_socket_guid unconditionally.
- Make check_reparse_point_target return PATH_REP on a reparse point
of this type if __WITH_AF_UNIX is not defined.
Ken Brown [Mon, 28 Sep 2020 20:34:44 +0000 (16:34 -0400)]
Cygwin: fix handling of known reparse points that are not symlinks
Commit aa467e6e, "Cygwin: add AF_UNIX reparse points to path
handling", changed check_reparse_point_target so that it could return
a positive value on a known reparse point that is not a symlink. But
some of the code in check_reparse_point that handles this positive
return value was executed unconditionally, when it should have been
executed only for symlinks.
As a result, posixify could be called on a buffer containing garbage,
and check_reparse_point could erroneously return a positive value on a
non-symlink. This is now fixed so that posixify is only called if the
reparse point is a symlink, and check_reparse_point returns 0 if the
reparse point is not a symlink.
Also fix symlink_info::check to handle this last case, in which
check_reparse_point returns 0 on a known reparse point.
git://sourceware.org / newlib-cygwin.git / log