H.J. Lu [Sat, 11 Jul 2015 20:41:47 +0000 (13:41 -0700)]
Replace %ld with %jd and cast to intmax_t
On x32, GCC 5.1 complains:
tst-fmemopen2.c: In function ‘do_test_without_buffer’:
tst-fmemopen2.c:124:15: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘off_t {aka long long int}’ [-Werror=format=]
printf ("FAIL: first ftello returned %ld, expected %zu\n", o, nstr);
^
tst-fmemopen2.c:135:15: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘off_t {aka long long int}’ [-Werror=format=]
printf ("FAIL: second ftello returned %ld, expected %zu\n", o, nbuf);
^
tst-fmemopen2.c:148:15: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘off_t {aka long long int}’ [-Werror=format=]
printf ("FAIL: third ftello returned %ld, expected %zu\n", o, nstr2);
^
tst-fmemopen2.c: In function ‘do_test_length_zero’:
tst-fmemopen2.c:183:15: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘off_t {aka long long int}’ [-Werror=format=]
printf ("FAIL: first ftello returned %ld, expected 0\n", o);
^
This patch silences GCC.
* stdio-common/tst-fmemopen2.c (do_test_without_buffer): Replace
%ld with %jd and cast to intmax_t.
(do_test_length_zero): Likewise.
Chris Metcalf [Fri, 10 Jul 2015 20:11:40 +0000 (16:11 -0400)]
math/test-fenvinline: avoid compiler warning
On tile (and any other machine with no FP exceptions) the
feenable_test() function will generate a "function defined but
not used" warning because all of the callers are commented out.
We already were ifdef'ing out the body of the function, so instead
just ifdef out the entire function if FE_ALL_EXCEPT == 0.
Remove unnecessary mutex locks from tst-tls-atexit test case
The locks don't synchronize with anything - they were likely
introduced initially to synchronize with some main thread code, but
that is no longer evident.
Torvald Riegel [Mon, 8 Jun 2015 21:14:20 +0000 (23:14 +0200)]
Clean up semaphore EINTR handling after Linux futex docs clarification.
The Linux kernel futex documentation now states that since Linux 2.6.22,
FUTEX_WAIT does return EINTR only when interrupted by a signal, and not
spuriously anymore. We only support more recent kernels, so clean up
EINTR handling in the semaphore and update the comments.
Torvald Riegel [Thu, 4 Dec 2014 13:12:23 +0000 (14:12 +0100)]
Add and use new glibc-internal futex API.
This adds new functions for futex operations, starting with wait,
abstimed_wait, reltimed_wait, wake. They add documentation and error
checking according to the current draft of the Linux kernel futex manpage.
Waiting with absolute or relative timeouts is split into separate functions.
This allows for removing a few cases of code duplication in pthreads code,
which uses absolute timeouts; also, it allows us to put platform-specific
code to go from an absolute to a relative timeout into the platform-specific
futex abstractions..
Futex operations that can be canceled are also split out into separate
functions suffixed by "_cancelable".
There are separate versions for both Linux and NaCl; while they currently
differ only slightly, my expectation is that the separate versions of
lowlevellock-futex.h will eventually be merged into futex-internal.h
when we get to move the lll_ functions over to the new futex API.
Martin Sebor [Thu, 9 Jul 2015 23:25:38 +0000 (19:25 -0400)]
The patch committed to fix bug #18435 caused regressions on aarch64
and also powerpc64 and powerpc64le. See the discussion in the thread
below for details. This change reverts the problematic bits leaving
the added test in place and marking XFAIL in anticipation of fixing
the bug in the near future.
https://sourceware.org/ml/libc-alpha/2015-07/msg00141.html
H.J. Lu [Thu, 9 Jul 2015 16:30:09 +0000 (09:30 -0700)]
Improve bndmov encoding with zero displacement
If x86-64 assembler doesn't support MPX, we encode bndmov instruction by
hand. When displacement is zero, assembler generates shorter encoding.
This patch improves bndmov encoding with zero displacement so that ld.so
is identical when using assemblers with and without MPX support.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_resolve): Improve
bndmov encoding with zero displacement.
Igor Zamyatin [Thu, 9 Jul 2015 13:50:12 +0000 (06:50 -0700)]
Preserve bound registers for pointer pass/return
We need to save/restore bound registers and add a BND prefix before
branches in _dl_runtime_profile so that bound registers for pointer
pass and return are preserved when LD_AUDIT is used.
[BZ #18134]
* sysdeps/i386/configure.ac: Set HAVE_MPX_SUPPORT.
* sysdeps/i386/configure: Regenerated.
* sysdeps/i386/dl-trampoline.S (PRESERVE_BND_REGS_PREFIX): New.
(_dl_runtime_profile): Save and restore Intel MPX return bound
registers when calling _dl_call_pltexit. Add
PRESERVE_BND_REGS_PREFIX before return.
* sysdeps/i386/link-defines.sym (LRV_BND0_OFFSET): New.
(LRV_BND1_OFFSET): Likewise.
* sysdeps/x86/bits/link.h (La_i86_retval): Add lrv_bnd0 and
lrv_bnd1.
* sysdeps/x86_64/dl-trampoline.S (_dl_runtime_profile): Fix
typo in bndmov encoding.
* sysdeps/x86_64/dl-trampoline.h: Properly save and restore
Intel MPX bound registers. Add PRESERVE_BND_REGS_PREFIX before
branch instructions to preserve bounds.
Samuel Thibault [Thu, 9 Jul 2015 11:56:30 +0000 (13:56 +0200)]
hurd: permit to use mlock from non-root process
* sysdeps/mach/hurd/mlock.c (mlock): When __get_privileged_ports
returns an error, also try to use host port from __mach_host_self for
the __vm_wire call.
* sysdeps/mach/hurd/munlock.c (munlock): Likewise.
Szabolcs Nagy [Thu, 9 Jul 2015 08:53:30 +0000 (09:53 +0100)]
[AArch64][BZ 18648] change greg_t definition in ucontext.h
This is an ABI breaking change, but
typedef int greg_t;
is not a useful definition on aarch64.
greg_t is usually used for defining gregset_t which is used
in mcontext_t. The general registers in mcontext_t can only
be accessed by target specific code and on aarch64 greg_t
is not needed for that so this change is not supposed to break
existing code, just fix the definition.
[BZ #18648]
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (greg_t): Change the
definition to elf_greg_t.
(Added another BZ entry that was missed in the previous commit).
Szabolcs Nagy [Thu, 9 Jul 2015 08:39:51 +0000 (09:39 +0100)]
[AArch64][BZ 18400] fix elf_prpsinfo in procfs.h
Kernel uses int pr_uid, pr_gid, but glibc used unsigned short.
This is an ABI breaking change, but the size and alignment of
the struct and the layout of other members is not changed and
there is no known usage of pr_uid and pr_gid so it is expected
to be safe.
This patch updates tst-fmemopen2 to check for fmemopen with NULL buffer
inputs and also refactor the code a bit.
The test relies on a POSIX compliant fmemopen implementation.
* stdio-common/tst-fmemopen2.c (do_test): Add test for NULL and zero
length buffers.
* stdio-common/tst-fmemopen.c (do_test): Refactor to use
test-skeleton.c.
This patch added a new fmemopen version, for glibc 2.22, that aims to be
POSIX complaint. It fixes some long-stading glibc fmemopen issues, such
as:
* it changes the way fseek with SEEK_END works on fmemopen to seek
relative to buffer size instead of first '\0'. This is default mode and
'b' opening mode does not change internal behavior (bz#6544).
* fix apending opening mode to use as start position either first null
byte of len specified in function call (bz#13152 and #13151).
* remove binary option 'b' and internal different handling (bz#12836)
* fix seek/SEE_END with negative values (bz#14292).
A compatibility symbol is provided to with old behavior for older symbols
version (2.2.5).
Use "|" instead of "+" when combine the _IO_LINE_BUF and _IO_UNBUFFERED flags
Both of "_IO_UNBUFFERED" and "_IO_LINE_BUF" are the bit flags, but I
find there are some codes looks like "_IO_LINE_BUF+_IO_UNBUFFERED",
while some codes are "_IO_LINE_BUF|_IO_UNBUFFERED".
I think the former is not good, even though the final result is same.
Mike Frysinger [Sat, 30 May 2015 18:55:16 +0000 (14:55 -0400)]
nscd: drop selinux/flask.h include
Building nscd w/selinux enabled yields a warning which yields an error:
In file included from selinux.c:32:0:
/usr/include/selinux/flask.h:5:2: error:
#warning "Please remove any #include's of this header in your source code."
I've done just that and it builds cleanly with libselinux-2.4.
Mike Frysinger [Sat, 30 May 2015 17:33:22 +0000 (13:33 -0400)]
pwd.h: add __nonnull markings [BZ #18641]
Mark all the functions that don't handle NULL pointers as __nonnull.
POSIX does not require either behavior, so the prototypes should match
the reality of the codebase.
Carlos O'Donell [Wed, 8 Jul 2015 06:42:11 +0000 (02:42 -0400)]
Fix ruserok scalability with large ~/.rhosts file.
Fixes bug 18557.
The ruserok API does hosts checks first while it walks the
user's ~/.rhosts file. This results in lots of DNS queries
that could have been skipped if we short-circuit test the
user portion first to see if would have had a failed match.
This supports configurations where rlogin is used on internal
secure networks with large numbers of users and machines.
The Red Hat QE team did extensive testing on various rlogin
combinations to validate this change, and in fact we found
a defect in the first version which is fixed in this version.
First dlopen call terminates with error because of undefined symbols,
but STB_GNU_UNIQUE ones set DF_1_NODELETE flag and hence block library
in the memory.
The library goes into inconsistent state as several structures remain
uninitialized. For instance, relocations for GOT table were not performed.
By the time of second dlopen call this library looks like as it would be
fully initialized but this is not true: any call through incorrect GOT
table leads to segmentation fault. On some systems this inconsistency
triggers assertions in the dynamic linker.
This patch adds a parameter to _dl_close_worker to implement forced object
deletion in case of dlopen() failure:
1. Clears DF_1_NODELETE bit if forced, to allow library to be removed from
memory.
2. For each unique symbol that is defined in this object clears
appropriate entry in _ns_unique_sym_table.
[BZ #17833]
* elf/Makefile (tests): Add tst-nodelete.
(modules-names): Add tst-nodelete-uniquemod.
(tst-nodelete-uniquemod.so-no-z-defs): New.
(tst-nodelete-rtldmod.so-no-z-defs): Likewise.
(tst-nodelete-zmod.so-no-z-defs): Likewise.
($(objpfx)tst-nodelete): Likewise.
($(objpfx)tst-nodelete.out): Likewise.
(LDFLAGS-tst-nodelete): Likewise.
(LDFLAGS-tst-nodelete-zmod.so): Likewise.
* elf/dl-close.c (_dl_close_worker): Add a parameter to
implement forced object deletion.
(_dl_close): Pass false to _dl_close_worker.
* elf/dl-open.c (_dl_open): Pass true to _dl_close_worker.
* elf/tst-nodelete.cc: New file.
* elf/tst-nodeletelib.cc: Likewise.
* elf/tst-znodeletelib.cc: Likewise.
* include/dlfcn.h (_dl_close_worker): Add a new parameter.
Stefan Liebler [Tue, 7 Jul 2015 14:11:14 +0000 (16:11 +0200)]
S390: Fix "backtrace() returns infinitely deep stack frames with makecontext()" [BZ #18508].
On s390/s390x backtrace(buffer, size) returns the series of called functions until
"makecontext_ret" and additional entries (up to "size") with "makecontext_ret".
GDB-backtrace is also warning:
"Backtrace stopped: previous frame identical to this frame (corrupt stack?)"
To reproduce this scenario you have to setup a new context with makecontext()
and activate it with setcontext(). See e.g. cf() function in testcase stdlib/tst-makecontext.c.
Or see bug in libgo "Bug 66303 - runtime.Caller() returns infinitely deep stack frames
on s390x " (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66303).
This patch omits the cfi_startproc/cfi_endproc directives in ENTRY/END macro of
__makecontext_ret. Thus no frame information is generated in .eh_frame and backtrace
stops after __makecontext_ret. There is also no .eh_frame info for _start or
thread_start functions.
ChangeLog:
[BZ #18508]
* stdlib/Makefile ($(objpfx)tst-makecontext3):
Depend on $(libdl).
* stdlib/tst-makecontext.c (cf): Test if _Unwind_Backtrace
is not called infinitely times.
(backtrace_helper): New function.
(trace_arg): New struct.
(st1): Enlarge stack size.
* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:
(__makecontext_ret): Omit cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/s390/s390-64/__makecontext_ret.S:
Likewise.
Stefan Liebler [Tue, 7 Jul 2015 14:11:14 +0000 (16:11 +0200)]
S390: Fix sem.h conformance test failures.
On s390 the following tests are failing due to unkown types time_t, pid_t:
FAIL: conform/UNIX98/sys/sem.h/conform
FAIL: conform/XOPEN2K/sys/sem.h/conform
FAIL: conform/XOPEN2K8/sys/sem.h/conform
FAIL: conform/XPG3/sys/sem.h/conform
FAIL: conform/XPG4/sys/sem.h/conform
This patch changes the s390 specific sem.h and includes sys/types.h instead
of bits/types.h. All other archs include sys/types.h, too.
Including bits/wordsize.h is obselete, because it is already inlcuded in
sys/types.h -> bits/types.h.
ChangeLog:
* sysdeps/unix/sysv/linux/s390/bits/sem.h:
Include sys/types.h instead of bits/types.h.
Remove inclusion of bits/wordsize.h.
Do not create invalid pointers in C code of string functions.
Some of the x86 string functions create pointers based on input strings
that may be outside of the input strings. When this happens in C code,
the compiler can potentially detect this, leading to warnings in
application code when those string functions are inlined. Perform those
operations in the assembly code instead of the C code to fix this.
Szabolcs Nagy [Mon, 6 Jul 2015 11:46:43 +0000 (12:46 +0100)]
[AArch64] make setcontext etc functions consistent with the kernel
since
https://sourceware.org/ml/libc-alpha/2014-04/msg00006.html
setcontext etc is no longer tied to the kernel use of ucontext.
in that patch the ucontext reserved space is not used consistently
with the kernel abi: the d8,d9 pair is saved in the slot of q8.
this is ok (*context functions work together), but probably not
desirable (ucontexts created by the kernel and getcontext are
subtly different).
the fix just replaces dN with qN in the save/restore code, which
does a bit more than needed (saves/restores the top half of qN that
is not callee saved), but this should not be an issue (and avoids
having to deal with endianness).
(kernel fpsimd context layout: the first 64bit contains 0x210 the fpsimd
context size and 0x46508001 the FPSIMD_MAGIC, the second 64bit is for
fpsr and fpcr, and the rest is the 128bit q0..q31 registers).
given d8=8.1, d9=9.1,... d15=15.1, the context created by getcontext is
* sysdeps/unix/sysv/linux/aarch64/getcontext.S (__getcontext): Use q
registers instead of d ones so the layout is kernel abi compatible.
* sysdeps/unix/sysv/linux/aarch64/setcontext.S (__setcontext): Likewise.
* sysdeps/unix/sysv/linux/aarch64/swapcontext.S (__swapcontext):
Likewise.# Please enter the commit message for your changes. Lines starting
Joseph Myers [Wed, 1 Jul 2015 22:27:49 +0000 (22:27 +0000)]
Fix ldbl-128 expm1l (-min_subnorm) result sign (bug 18619).
In the ldbl-128 implementation of expm1l, when expm1l's result should
underflow to 0 (argument minus the least subnormal, in some rounding
modes), it can be a zero of the wrong sign. This patch fixes this in
the same way previously used for the x86 / x86_64 versions.
Tested for mips64.
[BZ #18619]
* sysdeps/ieee754/ldbl-128/s_expm1l.c (__expm1l): Force underflow
and return argument in case of subnormal argument.
Martin Sebor [Wed, 1 Jul 2015 20:05:27 +0000 (14:05 -0600)]
The C++ 2011 std::call_once function is specified to allow
the initialization routine to exit by throwing an exception.
Such an execution, termed exceptional, requires call_once to
propagate the exception to its caller. A program may contain
any number of exceptional executions but only one returning
execution (which, if it exists, must be the last execution
with the same once flag).
On POSIX systems such as Linux, std::call_once is implemented
in terms of pthread_once. However, as discussed in libstdc++
bug 66146 - "call_once not C++11-compliant on ppc64le," GLIBC's
pthread_once hangs when the initialization function exits by
throwing an exception on at least arm and ppc64 (though
apparently not on x86_64). This effectively prevents call_once
from conforming to the C++ requirements since there doesn't
appear to be a thread-safe way to work around this problem in
libstdc++.
This patch changes pthread_once to handle gracefully init
functions that exit by throwing exceptions. It was successfully
tested on ppc64, ppc64le, and x86_64.
Torvald Riegel [Tue, 30 Jun 2015 15:05:44 +0000 (17:05 +0200)]
Remove documentation of lowlevellock systemtap probes.
The probes are not provided on all architectures (and only partially by the
x86 assembly implementation), and we are not aware of actual uses of these
probes.
a need for them.
Torvald Riegel [Tue, 23 Jun 2015 13:22:25 +0000 (15:22 +0200)]
Clean up BUSY_WAIT_NOP and atomic_delay.
This patch combines BUSY_WAIT_NOP and atomic_delay into a new
atomic_spin_nop function and adjusts all clients. The new function is
put into atomic.h because what is best done in a spin loop is
architecture-specific, and atomics must be used for spinning. The
function name is meant to tell users that this has no effect on
synchronization semantics but is a performance aid for spinning.
Joseph Myers [Mon, 29 Jun 2015 23:29:35 +0000 (23:29 +0000)]
Improve tgamma accuracy (bug 18613).
In non-default rounding modes, tgamma can be slightly less accurate
than permitted by glibc's accuracy goals.
Part of the problem is error accumulation, addressed in this patch by
setting round-to-nearest for internal computations. However, there
was also a bug in the code dealing with computing pow (x + n, x + n)
where x + n is not exactly representable, providing another source of
error even in round-to-nearest mode; it was necessary to address both
bugs to get errors for all testcases within glibc's accuracy goals.
Given this second fix, accuracy in round-to-nearest mode is also
improved (hence regeneration of ulps for tgamma should be from scratch
- truncate libm-test-ulps or at least remove existing tgamma entries -
so that the expected ulps can be reduced).
Some additional complications also arose. Certain tgamma tests should
strictly, according to IEEE semantics, overflow or not depending on
the rounding mode; this is beyond the scope of glibc's accuracy goals
for any function without exactly-determined results, but
gen-auto-libm-tests doesn't handle being lax there as it does for
underflow. (libm-test.inc also doesn't handle being lax about whether
the result in cases very close to the overflow threshold is infinity
or a finite value close to overflow, but that doesn't cause problems
in this case though I've seen it cause problems with random test
generation for some functions.) Thus, spurious-overflow markings,
with a comment, are added to auto-libm-test-in (no bug in Bugzilla
because the issue is with the testsuite, not a user-visible bug in
glibc). And on x86, after the patch I saw ERANGE issues as previously
reported by Carlos (see my commentary in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>), which
needed addressing by ensuring excess range and precision were
eliminated at various points if FLT_EVAL_METHOD != 0.
I also noticed and fixed a cosmetic issue where 1.0f was used in long
double functions and should have been 1.0L.
This completes the move of all functions to testing in all rounding
modes with ALL_RM_TEST, so gen-libm-have-vector-test.sh is updated to
remove the workaround for some functions not using ALL_RM_TEST.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18613]
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Take log of
X_ADJ not X when adjusting exponent.
(__ieee754_gamma_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Take log
of X_ADJ not X when adjusting exponent.
(__ieee754_gammaf_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Take
log of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Take
log of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Take log
of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* math/libm-test.inc (tgamma_test_data): Remove one test. Moved
to auto-libm-test-in.
(tgamma_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Add one test of tgamma. Mark some other
tests of tgamma with spurious-overflow.
* math/auto-libm-test-out: Regenerated.
* math/gen-libm-have-vector-test.sh: Do not check for START.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Mon, 29 Jun 2015 17:51:32 +0000 (17:51 +0000)]
Fix ldbl-128 j1l spurious underflows (bug 18612).
The ldbl-128 implementation of j1l produces spurious underflow
exceptions for some small arguments, as a result of squaring the
argument. This patch fixes it just to use a linear approximation for
sufficiently small arguments, and then to force an underflow exception
only in the cases where it is required.
Tested for mips64.
[BZ #18612]
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): For small
arguments, just return 0.5 times the argument, with underflow
forced as needed.
* math/auto-libm-test-in: Add more tests of j1.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Mon, 29 Jun 2015 16:52:16 +0000 (16:52 +0000)]
Fix j1, jn missing underflows (bug 16559).
Similar to various other bugs in this area, j1 and jn implementations
can fail to raise the underflow exception when the internal
computation is exact although the actual function is inexact. This
patch forces the exception in a similar way to other such fixes. (The
ldbl-128 / ldbl-128ibm j1l implementation is different and doesn't
need a change for this until spurious underflows in it are fixed.)
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16559]
* sysdeps/ieee754/dbl-64/e_j1.c: Include <float.h>.
(__ieee754_j1): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c: Include <float.h>.
(__ieee754_j1f): Force underflow exception for small results.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <float.h>.
(__ieee754_j1l): Force underflow exception for small results.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Add more tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Mon, 29 Jun 2015 14:38:46 +0000 (14:38 +0000)]
Update headers for Linux 4.0, 4.1 definitions.
This patch updates installed glibc headers for new definitions from
Linux 4.0 and 4.1 that seem relevant to glibc headers. In addition, I
noticed that PF_IB / AF_IB, added in Linux 3.11, were missing for no
obvious reason, so added those as well.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
* sysdeps/unix/sysv/linux/bits/in.h (IP_CHECKSUM): New macro.
* sysdeps/unix/sysv/linux/bits/socket.h (PF_IB): Likewise.
(PF_MPLS): Likewise.
(AF_IB): Likewise.
(AF_MPLS): Likewise.
* sysdeps/unix/sysv/linux/sys/mount.h (MS_LAZYTIME): New enum
value and macro.
(MS_RMT_MASK): Include MS_LAZYTIME.
Mel Gorman [Mon, 8 Jun 2015 12:36:13 +0000 (13:36 +0100)]
malloc: Do not corrupt the top of a threaded heap if top chunk is MINSIZE [BZ #18502]
mksquashfs was reported in openSUSE to be causing segmentation faults when
creating installation images. Testing showed that mksquashfs sometimes
failed and could be reproduced within 10 attempts. The core dump looked
like the heap top was corrupted and was pointing to an unmapped area. In
other cases, this has been due to an application corrupting glibc structures
but mksquashfs appears to be fine in this regard.
The problem is that heap_trim is "growing" the top into unmapped space.
If the top chunk == MINSIZE then top_area is -1 and this check does not
behave as expected due to a signed/unsigned comparison
if (top_area <= pad)
return 0;
The next calculation extra = ALIGN_DOWN(top_area - pad, pagesz) calculates
extra as a negative number which also is unnoticed due to a signed/unsigned
comparison. We then call shrink_heap(heap, negative_number) which crashes
later. This patch adds a simple check against MINSIZE to make sure extra
does not become negative. It adds a cast to hint to the reader that this
is a signed vs unsigned issue.
Without the patch, mksquash fails within 10 attempts. With it applied, it
completed 1000 times without error. The standard test suite "make check"
showed no changes in the summary of test results.
Joseph Myers [Thu, 25 Jun 2015 21:46:02 +0000 (21:46 +0000)]
Use round-to-nearest internally in jn, test with ALL_RM_TEST (bug 18602).
Some existing jn tests, if run in non-default rounding modes, produce
errors above those accepted in glibc, which causes problems for moving
tests of jn to use ALL_RM_TEST. This patch makes jn set rounding
to-nearest internally, as was done for yn some time ago, then computes
the appropriate underflowing value for results that underflowed to
zero in to-nearest, and moves the tests to ALL_RM_TEST. It does
nothing about the general inaccuracy of Bessel function
implementations in glibc, though it should make jn more accurate on
average in non-default rounding modes through reduced error
accumulation. The recomputation of results that underflowed to zero
should as a side-effect fix some cases of bug 16559, where jn just
used an exact zero, but that is *not* the goal of this patch and other
cases of that bug remain unfixed.
(Most of the changes in the patch are reindentation to add new scopes
for SET_RESTORE_ROUND*.)
Tested for x86_64, x86, powerpc and mips64.
[BZ #16559]
[BZ #18602]
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Set
round-to-nearest internally then recompute results that
underflowed to zero in the original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise
* math/libm-test.inc (jn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
H.J. Lu [Thu, 25 Jun 2015 09:37:04 +0000 (02:37 -0700)]
Support compilers defaulting to PIE
To support building glibc with GCC 6 configured with --enable-default-pie,
which generates PIE by default, we need to build programs as PIE. But
elf/tst-dlopen-aout must not be built as PIE since it tests dlopen on
ET_EXEC file and PIE is ET_DYN.
[BZ #17841]
* Makeconfig (no-pie-ldflag): New.
(+link): Set to $(+link-pie) if default to PIE.
(+link-tests): Set to $(+link-pie-tests) if default to PIE.
* config.make.in (build-pie-default): New.
* configure.ac (libc_cv_pie_default): New. Set to yes if -fPIE
is default. AC_SUBST.
* configure: Regenerated.
* elf/Makefile (LDFLAGS-tst-dlopen-aout): New.
H.J. Lu [Thu, 7 May 2015 20:26:34 +0000 (13:26 -0700)]
Align TCB offset to the maximum alignment
We need to align TCB offset to the maximum alignment for TLS_TCB_AT_TP
targets, as _dl_allocate_tls_storage (in elf/dl-tls.c) does using
__libc_memalign and dl_tls_static_align.
[BZ #18383]
* csu/libc-tls.c (__libc_setup_tls) [TLS_TCB_AT_TP]: Align
TCB_OFFSET to MAX_ALIGN, not just TCBALIGN. Add comment.
* elf/Makefile (test-xfail-tst-tlsalign{,-static}): Remove
comment for i386/x86-64.
(test-xfail-tst-tlsalign-extern-static): Removed.
Joseph Myers [Wed, 24 Jun 2015 23:27:18 +0000 (23:27 +0000)]
Refactor libm tests.
This patch refactors the libm tests using libm-test.inc to reduce the
level of duplicate definitions. New headers are created for the
definitions shared by tests for a particular type; by tests of inline
functions; by tests of non-inline functions; by scalar tests; and by
vector tests. The unused MATHCONST macro is removed. A new macro
VEC_LEN is added to the vector headers to allow the macros defining
wrappers for vector functions to be defined once, instead of six times
each (differing only in vector length) as before. There is still
scope for further refactoring, but this seems a useful start.
cexp, ccos, ccosh, csin and csinh have spurious underflows in cases
where they compute sin of the smallest normal, that produces an
underflow exception (depending on which sin implementation is in use)
but the final result does not underflow. ctan and ctanh may also have
such underflows, or they may be latent (the issue there is that
e.g. ctan (DBL_MIN) should, rounded upwards, be the next double value
above DBL_MIN, which under glibc's accuracy goals may not have an
underflow exception, but the intermediate computation of sin (DBL_MIN)
would legitimately underflow on before-rounding architectures).
This patch fixes all those functions so they use plain comparisons (>
DBL_MIN etc.) instead of comparing the result of fpclassify with
FP_SUBNORMAL (in all these cases, we already know the number being
compared is finite). Note that in the case of csin / csinf / csinl,
there is no need for fabs calls in the comparison because the real
part has already been reduced to its absolute value.
As the patch fixes the failures that previously obstructed moving
tests of cexp to use ALL_RM_TEST, those tests are moved to ALL_RM_TEST
by the patch (two functions remain yet to be converted).
Tested for x86_64 and x86 and ulps updated accordingly.
Joseph Myers [Wed, 24 Jun 2015 16:37:44 +0000 (16:37 +0000)]
Move csin, csinh tests to auto-libm-test-in.
This patch moves most tests of csin and csinh with finite inputs from
libm-test.inc to auto-libm-test-in. The remaining two tests of each
function with small arguments are not moved because moving them causes
the time required by gen-auto-libm-tests to go up from under 8 seconds
to over 11 minutes for me. (The current development version of MPC
has had speed improvements for mpc_sin for some time, but there hasn't
been a release containing those improvements yet.)
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of csin and csinh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (csin_test_data): Remove tests moved to
auto-libm-test-in.
(csinh_test_data): Likewise.
Joseph Myers [Wed, 24 Jun 2015 16:20:48 +0000 (16:20 +0000)]
Fix csin, csinh overflow in directed rounding modes (bug 18593).
csin and csinh can produce bad results when overflowing in directed
rounding modes, because a multiplication that can overflow is followed
by a possible negation. This patch fixes this by negating one of the
arguments of the multiplication before the multiplication instead of
negating the result.
The new tests for this issue are added to auto-libm-test-in, starting
use of that file for csin and csinh. The issue was found in the
course of moving existing tests for csin and csinh (existing tests, by
being enabled in more cases than previously, showed the issue for
float and double but not for long double); that move will now be done
separately.
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #18593]
* math/s_csin.c (__csin): Negate before rather than after possibly
overflowing multiplication.
* math/s_csinf.c (__csinf): Likewise.
* math/s_csinh.c (__csinh): Likewise.
* math/s_csinhf.c (__csinhf): Likewise.
* math/s_csinhl.c (__csinhl): Likewise.
* math/s_csinl.c (__csinl): Likewise.
* math/auto-libm-test-in: Add some tests of csin and csinh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (csin_test_data): Use AUTO_TESTS_c_c.
(csinh_test_data): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Joseph Myers [Wed, 24 Jun 2015 15:12:03 +0000 (15:12 +0000)]
Fix ldbl-128 expl missing underflows (bug 18586).
Similar to various other bugs in this area, the ldbl-128 expl
implementation does not raise the underflow exception for all
subnormal results, if the scaling down is exact although the actual
result is inexact. This patch fixes this by forcing the exception in
this case (the tests that failed before and pass after the test are
already in the testsuite).
Tested for mips64.
[BZ #18586]
* sysdeps/ieee754/ldbl-128/e_expl.c (__ieee754_expl): Force
underflow exception for small results.
Joseph Myers [Tue, 23 Jun 2015 22:24:20 +0000 (22:24 +0000)]
Fix sin, sincos missing underflows (bug 16526, bug 16538).
Similar to various other bugs in this area, some sin and sincos
implementations do not raise the underflow exception for subnormal
arguments, when the result is tiny and inexact. This patch forces the
exception in a similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16526]
[BZ #16538]
* sysdeps/ieee754/dbl-64/s_sin.c: Include <float.h>.
(__sin): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/k_sinf.c: Include <float.h>.
(__kernel_sinf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_sincosl.c: Include <float.h>.
(__kernel_sincosl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Include <float.h>.
(__kernel_sincosl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/powerpc/fpu/k_sinf.c: Include <float.h>.
(__kernel_sinf): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of sin and sincos.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Tue, 23 Jun 2015 17:26:46 +0000 (17:26 +0000)]
Fix spurious "inexact" exceptions from __kernel_standard_l (bug 18245, bug 18583).
__kernel_standard_l converts long double arguments to double for use
in SVID "struct exception". This has special-case handling for when
that conversion would overflow or underflow but the original long
double function wouldn't. However, it turns out that "inexact"
exceptions can be spurious here as well, when the function is exactly
determined and __kernel_standard_l is being called for a domain error.
This patch fixes this by using feholdexcept / fesetenv to avoid
exceptions from the conversion, replacing the previous special-case
logic for overflow and underflow (this covers all functions using
__kernel_standard_l, not just those that actually need a change, since
there doesn't seem to be much point in restricting things just to the
functions that mustn't get "inexact" here).
Tested for x86_64 and x86.
[BZ #18245]
[BZ #18583]
* sysdeps/ieee754/k_standardl.c: Include <fenv.h>.
(__kernel_standard_l): Use feholdexcept and fesetenv around
conversion to double instead of special-casing overflow and
underflow.
* math/libm-test.inc (fmod_test_data): Add more tests.
(remainder_test_data): Likewise.
(sqrt_test_data): Likewise.
Torvald Riegel [Wed, 29 Oct 2014 09:34:36 +0000 (10:34 +0100)]
Fix atomic_full_barrier on x86 and x86_64.
This fixes BZ #17403 by defining atomic_full_barrier,
atomic_read_barrier, and atomic_write_barrier on x86 and x86_64. A full
barrier is implemented through an atomic idempotent modification to the
stack and not through using mfence because the latter can supposedly be
somewhat slower due to having to provide stronger guarantees wrt.
self-modifying code, for example.
Joseph Myers [Tue, 23 Jun 2015 16:27:25 +0000 (16:27 +0000)]
Fix math/Makefile dependency on libm-test.stmp for libmvec tests.
Since the libmvec tests went in I've noticed build failures from
parallel testing in math/, when those tests start building before
libm-test.c has been fully generated. (This only applies if libm test
sources have been modified after the original glibc build, because
otherwise libm-test.stmp was generated during the original build and
doesn't get regenerated during testing.)
Those tests depend on libm-test.stmp, but the dependency uses
$(libmvec-tests), which is set in the sysdeps Makefile fragments, and
appears before the inclusion of ../Rules, which is what includes those
fragments; thus, the dependency does not work and parallel make can
start building the vector tests too soon. This patch moves the
dependency further down so that the required variable is defined when
the dependency is.
Tested for x86_64.
* math/Makefile [$(PERL) != no]
($(addprefix $(objpfx), $(addsuffix .o, $(libm-vec-tests)))): Move
dependency on libm-test.stmp below the inclusion of Rules.
Joseph Myers [Tue, 23 Jun 2015 16:01:54 +0000 (16:01 +0000)]
Fix csqrt spurious underflows (bug 18371).
The csqrt implementations in glibc can cause spurious underflows in
some cases as a side-effect of the scaling for large arguments (when
underflow is correct for the square root of the argument that was
scaled down to avoid overflow, but not for the original argument).
This patch arranges to avoid the underflowing intermediate computation
(eliminating a multiplication in 0.5 in the problem cases where a
subsequent scaling by 2 would follow).
Tested for x86_64 and x86 and ulps updated accordingly (only needed
for x86).
[BZ #18371]
* math/s_csqrt.c (__csqrt): Avoid multiplication by 0.5 where
intermediate but not final result might underflow.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
Joseph Myers [Tue, 23 Jun 2015 14:35:18 +0000 (14:35 +0000)]
Fix exp2, exp2f spurious underflows (bug 18219).
The dbl-64 and flt-32 implementations of exp2 functions produce
spurious underflow exceptions. The underlying reason is the same in
both cases: the computation works as (2^a - 1)*2^b + 2^b for suitably
chosen a and b, where a has small magnitude so 2^a - 1 can be computed
with a low-degree polynomial approximation, and (2^a - 1)*2^b can
underflow even when the final result does not. This patch fixes this
by adjusting the threshold for when scaling is used to avoid
intermediate underflow so it works for any possible value of a where
the final result would not underflow.
Tested for x86_64 and x86.
[BZ #18219]
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Reduce
threshold on absolute value of exponent for which scaling is used.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* math/auto-libm-test-in: Add more tests of exp2.
* math/auto-libm-test-out: Regenerated.
Dmitry V. Levin [Thu, 18 Jun 2015 21:40:46 +0000 (21:40 +0000)]
Fix potential hanging of gethostbyaddr_r/gethostbyname_r
When "reorder" resolver option is enabled, threads of a multi-threaded process
could hang in gethostbyaddr_r, gethostbyname_r, or gethostbyname2_r.
Due to a trivial bug in _res_hconf_reorder_addrs, simultaneous
invocations of this function in a multi-threaded process could result to
_res_hconf_reorder_addrs returning without releasing the lock it holds,
causing other threads to block indefinitely while waiting for the lock
that is not going to be released.
[BZ #17977]
* resolv/res_hconf.c (_res_hconf_reorder_addrs): Fix unlocking
when initializing interface list, based on the bug analysis
and the patch proposed by Eric Newton.
* resolv/tst-res_hconf_reorder.c: New test.
* resolv/Makefile [$(have-thread-library) = yes] (tests): Add
tst-res_hconf_reorder.
($(objpfx)tst-res_hconf_reorder): Depend on $(libdl)
and $(shared-thread-library).
(tst-res_hconf_reorder-ENV): New variable.
Joseph Myers [Mon, 22 Jun 2015 21:06:19 +0000 (21:06 +0000)]
Fix expm1 missing underflows (bug 16353).
Similar to various other bugs in this area, some expm1 implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
(The issue does not apply to the ldbl-* implementations or to those
for x86 / x86_64 long double. The change to
sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c is one I missed when
previously fixing bug 16354; the bug in that implementation was
previously latent, but the expm1 fixes stopped it being latent and so
required it to be fixed to avoid spurious underflows from cosh.)
Tested for x86_64 and x86.
[BZ #16353]
* sysdeps/i386/fpu/s_expm1.S (dbl_min): New object.
(__expm1): Force underflow exception for arguments with small
absolute value.
* sysdeps/i386/fpu/s_expm1f.S (flt_min): New object.
(__expm1f): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/dbl-64/s_expm1.c: Include <float.h>.
(__expm1): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_expm1f.c: Include <float.h>.
(__expm1f): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c (__ieee754_cosh):
Check for small arguments before calling __expm1.
* math/auto-libm-test-in: Do not mark underflow exceptions as
possibly missing for bug 16353.
* math/auto-libm-test-out: Regenerated.
Leonhard Holz [Mon, 22 Jun 2015 02:23:09 +0000 (07:53 +0530)]
remove unnecessary memset in strcoll
This patch avoids some initialization overhead in the hot path of strcoll by
replacing a memset with zero assignments. It improves the file listing benchmark
by 15% on x86. Tests are ok.
Joseph Myers [Sun, 21 Jun 2015 18:43:10 +0000 (18:43 +0000)]
Fix x86_64 / x86 expm1l (-min_subnorm) result sign (bug 18569).
In the x86 / x86_64 implementations of expm1l, when expm1l's result
should underflow to 0 (argument minus the least subnormal, in some
rounding modes), it can be a zero of the wrong sign. This patch fixes
this by returning the argument with underflow forced in that case
(this is a 1ulp error relative to the correctly rounded result of -0,
which is OK in terms of the documented accuracy goals, whereas a
result with the wrong sign never is).
Tested for x86_64 and x86.
[BZ #18569]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Force
underflow and return argument in case of subnormal argument.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Sun, 21 Jun 2015 17:48:04 +0000 (17:48 +0000)]
Fix x86 / x86_64 expl, exp10l missing underflows (bug 16361).
Similar to various other bugs in this area, the x86 and x86_64
implementations of expl / exp10l can fail to produce underflow
exceptions when the unscaled result has trailing 0 bits so the scaling
down to subnormal precision is exact. This patch fixes this by
forcing the exception in the case of tiny results.
Tested for x86_64 and x86.
[BZ #16361]
* sysdeps/i386/fpu/e_expl.S [!USE_AS_EXPM1L] (cmin): New object.
[!USE_AS_EXPM1L] (IEEE754_EXPL): Force underflow exception for
tiny results.
* sysdeps/x86_64/fpu/e_expl.S [!USE_AS_EXPM1L] (cmin): New object.
[!USE_AS_EXPM1L] (IEEE754_EXPL): Force underflow exception for
tiny results.
* math/auto-libm-test-in: Add more tests of exp and exp10. Do not
mark underflow exceptions as possibly missing for bug 16361.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Fri, 19 Jun 2015 20:52:44 +0000 (20:52 +0000)]
conformtest: Fix pselect expectations.
conformtest expected pselect for XOPEN2K and POSIX2008 (correctly),
but not for XOPEN2K8 (wrongly). This patch fixes the data to expect
it for XOPEN2K8 as well.
(As for all such fixes based on failures seen from the tests, there is
no guarantee that the data is fully correct for a particular standard
after the fix; headers and data may well have matching bugs. So far
I've only reviewed ISO, ISO99, ISO11 and POSIX data in detail, though
I hope eventually to review the others.)
Joseph Myers [Fri, 19 Jun 2015 20:05:41 +0000 (20:05 +0000)]
conformtest: Support xfail markers on individual assertions.
Various conformtest tests fail because of known issues, filed in
Bugzilla, that are hard to fix (requiring new features, kernel
cooperation or involving changing types in ways that may involve care
around padding when interfacing to the kernel). Such an issue has the
effect of making the whole test for the (standard, header) pair fail,
so hiding any other issues with that header for that standard
(possibly regressions or architecture-specific issues).
This patch adds a mechanism for individual conformtest test
expectations to start with xfail-, meaning that a failure of that
particular assertion does not cause the whole test to fail at the
makefile level and so failure at the makefile level can be used to
detect other issues that are likely to be easier to fix. This is
similar to the whitelisted symbols in the linknamespace tests, or the
marking of particular libm tests as allowing spurious or missing
exceptions, for example. The bugs filed in Bugzilla should still be
fixed, and the xfail- markers removed at that point, but xfail-
renders the tests more useful until that happens.
Note that there is no way to add such a marker for the assertion that
a header uses only symbols in the namespace of symbols it's meant to
use. I don't think there's any need for a way to xfail those
namespace tests other than xfailing the whole (standard, header) pair
at the makefile level, since they are generally straightforward to fix
(add appropriate conditionals on the problem definitions).
The xfails in this patch do not necessarily cover all cases of
hard-to-fix header bugs filed in Bugzilla that currently show up in
conformtest failures; there may be more yet to add for existing open
bugs.
Stefan Liebler [Fri, 19 Jun 2015 11:47:59 +0000 (13:47 +0200)]
Fix timezone tests run in parallel.
The Makefile rule is called one time for target %/UTC or %/Universal.
If the tests are run in parallel, UTC or Universal can trigger the rule.
This patch patch generates the second test-result file as a copy of the
generated one.
Thus the testsuite can rely on the existence of the test-result files
regardless of which target has triggered the rule.
ChangeLog:
* timezone/Makefile (%/UTC %/Universal):
Generate test-result files for UTC and Universal.
Joseph Myers [Thu, 18 Jun 2015 23:27:41 +0000 (23:27 +0000)]
Fix asinh missing underflows (bug 16350).
Similar to various other bugs in this area, some asinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86 and mips64.
[BZ #16350]
* sysdeps/i386/fpu/s_asinh.S (__asinh): Force underflow exception
for arguments with small absolute value.
* sysdeps/i386/fpu/s_asinhf.S (__asinhf): Likewise.
* sysdeps/i386/fpu/s_asinhl.S (__asinhl): Likewise.
* sysdeps/ieee754/dbl-64/s_asinh.c: Include <float.h>.
(__asinh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_asinhf.c: Include <float.h>.
(__asinhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Do not mark underflow exceptions as
possibly missing for bug 16350.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Thu, 18 Jun 2015 23:08:15 +0000 (23:08 +0000)]
Remove include/bits/ipc.h.
Ten conformtest failures arise from the internal header
include/bits/ipc.h failing to condition internal declarations, outside
the public namespace of headers including bits/ipc.h, on [!_ISOMAC].
As discussed in
<https://sourceware.org/ml/libc-alpha/2015-06/msg00653.html>, the
internal declarations that are actually relevant are in ipc_priv.h and
so include/bits/ipc.h should not be needed at all; this patch removes
it. (Ten further conformtest failures for other headers including
bits/ipc.h remain because of other conformance issues in those
headers.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
Joseph Myers [Thu, 18 Jun 2015 19:48:22 +0000 (19:48 +0000)]
Fix netinet/in.h MCAST_* namespace (bug 18558).
sysdeps/unix/sysv/linux/bits/in.h (as included in netinet/in.h, and
via that in netdb.h and arpa/inet.h) defines a series of MCAST_*
macros, both under __USE_MISC and then again unconditionally. These
are not POSIX macros, nor in any of the namespaces listed in POSIX as
reserved for this header, so should not be defined unconditionally.
This patch duly removes the unconditional definitions, leaving the
ones conditional on __USE_MISC.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
Andrew Senkevich [Thu, 18 Jun 2015 17:11:27 +0000 (20:11 +0300)]
Vector sincosf for x86_64 and tests.
Here is implementation of vectorized sincosf containing SSE, AVX,
AVX2 and AVX512 versions according to Vector ABI
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
Andrew Senkevich [Thu, 18 Jun 2015 14:55:55 +0000 (17:55 +0300)]
Vector sincos for x86_64 and tests.
Here is implementation of vectorized sincos containing SSE, AVX,
AVX2 and AVX512 versions according to Vector ABI
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
* NEWS: Mention addition of x86_64 vector sincos.
* bits/libm-simd-decl-stubs.h: Added stubs for sincos.
* math/math.h (__MATHDECL_VEC): New macro.
* math/bits/mathcalls.h: Added sincos declaration with __MATHDECL_VEC.
* math/gen-libm-have-vector-test.sh: Added generation of sincos wrapper
declaration under condition.
* math/test-vec-loop.h (TEST_VEC_LOOP): Refactored.
* math/test-double-vlen2.h: Added wrapper for sincos tests, reflected
TEST_VEC_LOOP change.
* math/test-double-vlen4.h: Likewise.
* math/test-double-vlen8.h: Likewise.
* math/test-float-vlen16.h: Reflected TEST_VEC_LOOP change.
* math/test-float-vlen4.h: Likewise.
* math/test-float-vlen8.h: Likewise.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New symbols added.
* sysdeps/x86/fpu/bits/math-vector.h: Added sincos SIMD declaration.
* sysdeps/x86_64/fpu/Makefile (libmvec-support): Added new files.
* sysdeps/x86_64/fpu/Versions: New versions added.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerated.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines):
Added build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos2_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos2_core_sse4.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos4_core_avx2.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sincos8_core_avx512.S: New file.
* sysdeps/x86_64/fpu/svml_d_sincos2_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sincos4_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sincos4_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_d_sincos8_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sincos_data.S: New file.
* sysdeps/x86_64/fpu/svml_d_sincos_data.h: New file.
* sysdeps/x86_64/fpu/svml_d_wrapper_impl.h: Added wrappers for sincos.
* sysdeps/x86_64/fpu/test-double-vlen2-wrappers.c: Vector sincos tests.
* sysdeps/x86_64/fpu/test-double-vlen2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8.c: Likewise.
git://sourceware.org / glibc.git / log