Jeff Johnston [Tue, 26 May 2015 19:23:39 +0000 (15:23 -0400)]
Store entire context for or1k
- Store the exception program counter (from EPCR) and exception status
register (from ESR) also during the exception. A runtime system may
replace them thereby to implement a thread switch.
Jeff Johnston [Tue, 26 May 2015 19:21:52 +0000 (15:21 -0400)]
Fix exception stack frame for or1k
- We do not need a red zone here, as we do not operate on the current
stack, but always use the clear exception stack. Also reserve two
extra words for the context to store EPCR and ESR.
Jeff Johnston [Tue, 26 May 2015 19:19:13 +0000 (15:19 -0400)]
Fix interrupt handling for or1k.
- During interrupt handling the PICSR, table pointers and current
interrupt line have been saved in incorrect registers and/or stored on
the stack.
- Save the pointer in r16/r18, PICSR in r20 and the current interrupt
line in r22. Those are callee-saved registers, so that the register
values will be preserved.
* or1k/interruts-asm.S: Change registers to callee-saved.
Nick Clifton [Mon, 18 May 2015 13:14:28 +0000 (14:14 +0100)]
Add a check that the data area does not overrun the stack.
* msp430/msp430-sim.ld (.stack): Add an assertion to make sure
that the data area does not overrun the stack. PROVIDE a new
symbol __stack_size to allow the user to set the limit.
* msp430/msp430xl-sim.ld (.stack): Likewise.
* rl78/rl78-sim.ld (.stack): Likewise.
* rl78/rl78.ld (.stack): Likewise.
* rx/rx-sim.ld (.stack): Likewise.
* rx/rx.ld (.stack): Likewise.
* msp430/Makefile.in (SCRIPTS): Remove msp430.ld.
(CRT_OBJS): Add crt_move_highdata.o.
* msp430/memmodel.h (START_CRT_FUNC): New macro.
(END_CRT_FUNC): New macro.
(WEAK_DEF): New macro.
* msp430/crt0.S: Use new macros.
(move_highdata): New code to initialise the .data section if it is
held in high memory.
* msp430/msp430-sim.ld (.data): Add .either.data.
(.rodata2): Move some read-only data sections here.
(.text): Add .either.text.
(.rodata): Add .either.rodata.
(.bss): Add .either.bss.
* msp430/msp430xl-sim.ld (MEMORY): Add HIROM.
(.rodata2): Move some read-only data sections here.
(.upper.data): New section. Include notes about how to initialise
it.
* libc/include/sys/config.h: Move evaluation of _UINTPTR_EQ_ULONG and
_UINTPTR_EQ_ULONGLONG from here...
* libc/include/sys/_intsup.h: ...to here. Rename to _INTPTR_EQ_LONG
and _INTPTR_EQ_LONGLONG to refer to signed base type. Add test for
base type of int32_t and set _INT32_EQ_LONG accordingly.
* libc/include/stdint.h: Change checks for __have_long32 to checks
for _INT32_EQ_LONG.
* libc/include/inttypes.h: Ditto. Accommodate aforementioned name
change.
* path.cc (path_conv::set_nt_native_path): New function.
* path.h (path_conv::set_nt_native_path): Add prototype.
* syscall.cc (try_to_bin): Handle moving files to the recycler
accessed via a local virtual drive (subst). Fix a problem renaming
the file to the unique replacement name on Samba. Align comment.
* fhandler.h (class fhandler_base): Add virtual function
get_io_handle_cyg() to get handle from which OPOST-processed output is
read on PTY master.
(class fhandler_pty_slave): Add variable output_handle_cyg to store a
handle to which OPOST-processed output is written. Add two functions,
i.e., set_output_handle_cyg() and get_output_handle_cyg(), regarding
variable output_handle_cyg. Now, output_handle is used only by native
windows program. The data before OPOST-processing is written to
output_handle and OPOST-processing is applied in the master-side. For a
cygwin process, OPOST-processing is applied in the slave-side, and the
data after OPOST-processing is written to output_handle_cyg.
(class fhandler_pty_master): Add two variables, i.e., io_handle_cyg and
to_master_cyg, to store handles of a pipe through which OPOST-processed
output passes. Add pty_master_fwd_thread and function
pty_master_fwd_thread() for a thread which applies OPOST-processing
and forwards data from io_handle to to_master_cyg. Add function
get_io_handle_cyg() regarding variable io_handle_cyg. Now, the pipe
between io_handle and to_master are used only by native windows program
for applying OPOST-processing in the master-side. For a cygwin process,
the pipe between io_handle_cyg and to_master_cyg is used for passing
through the data which is applied OPOST-processing in the slave-side.
* fhandler_tty.cc (struct pipe_reply): Add member to_master_cyg.
(fhandler_pty_master::process_slave_output): Read slave output from
io_handle_cyg rather than io_handle.
(fhandler_pty_slave::fhandler_pty_salve): Initialize output_handle_cyg.
(fhandler_pty_slave::open): Set output_handle_cyg by duplicating handle
to_master_cyg on PTY master.
(fhandler_pty_slave::close): Close handle output_handle_cyg.
(fhandler_pty_slave::write): Write data to output_handle_cyg rather
than output_handle.
(fhandler_pty_slave::fch_close_handles): Close handle output_handle_cyg.
(fhandler_pty_master::fhandler_pty_master): Initialize io_handle_cyg,
to_master_cyg and master_fwd_thread.
(fhandler_pty_master::cleanup): Clean up to_master_cyg as well.
(fhandler_pty_master::close): Print to_master_cyg as well in debug
message. Terminate master forwarding thread. Close handles
to_master_cyg and io_handle_cyg.
(fhandler_pty_master::ioctl): Use io_handle_cyg rather than to_master.
(fhandler_pty_master::pty_master_thread): Add code for duplicating
handle to_master_cyg.
(fhandler_pty_master::pty_master_fwd_thread): New function for a thread
to forward OPOST-processed data from io_handle to to_master_cyg. This
thread applies OPOST-processing to the output of native windows program.
(::pty_master_fwd_thread): Ditto.
(fhandler_pty_master::setup): Create a new pipe to pass thruegh OPOST-
processed output. Create new thread to forward data from io_handle to
to_master_cyg. Set handle to_master_cyg to tty. Print io_handle_cyg as
well in debug message. Close handles io_handle_cyg and to_master_cyg in
case of error.
(fhandler_pty_master::fixup_after_fork): Set handle to_master_cyg to
tty. Copy handle to_master_cyg from arch->to_master_cyg.
(fhandler_pty_master::fixup_after_exec): Clean up to_master_cyg.
* select.cc: Check handle returned by get_io_handle_cyg() rather than
get_handle().
* tty.h (class tty): Add variable _to_master_cyg to store a handle to
which OPOST-processed data is written. Add two functions,
to_master_cyg() and set_to_master_cyg(), regarding _to_master_cyg.
Fix basename prototype collision string.h vs libgen.h
* libc/include/libgen.h (basename): Drop defining _BASENAME_DEFINED.
Always define macro basename. Add comment to explain why.
* libc/include/string.h (basename): Check for basename instead of
_BASENAME_DEFINED. Drop __GNUC__ branch, always use basename macro.
Change comment to explain why. Add nonnull function attribute.
Mike Frysinger [Tue, 21 Apr 2015 05:34:24 +0000 (01:34 -0400)]
libgloss: arm: fix copy & paste in syscall.h
This header was clearly copied from the common syscall.h and customized,
but the header comment is no longer accurate -- this isn't the general
file anymore.
David Macek [Sat, 18 Apr 2015 21:25:15 +0000 (23:25 +0200)]
Fix inconsistencies in docs regarding fstab and executable file detection
The inline list of mount options seemed redundant, so the paragraph now points
to the list below it.
List of executable extensions updated according to fhandler_disk_file.cc. List
of executable magic numbers updated according to path.h (has_exec_chars).
* pathnames.xml: Fix inconsistencies in docs regarding fstab and
executable file detection
Support acl(2) method for reading pty ACLs, fix pty chown
* fhandler.h (fhandler_pty_slave::facl): Add prototype.
* fhandler_tty.cc (fhandler_pty_slave::facl): New method.
(fhandler_pty_slave::fchown): Fix uid/gid handling.
* sec_acl.cc (set_posix_access): Drop superfluous class_idx variable.
Simplify and move around code in a few places. To improve ACL
readability, add r/w permissions to Admins ACE appended to pty ACL.
Add comment to explain Windows ACE Mask filtering being in the way of
creating a real CLASS_OBJ.
(get_posix_access): Fake CLASS_OBJ for ptys. Explain why.
* security.cc (get_object_attribute): Add S_IFCHR flag to attributes
when calling get_posix_access.
Fix merging group perms into owner perms in owner == group case
* sec_acl.cc (set_posix_access): Move merging group perms into owner
perms in case of owner == group after mask has been computed. Take
mask into account when doing so to avoid unnecessary ACCESS_DENIED_ACE.
Set GROUP_OBJ and CLASS_OBJ perms to new group perms
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Deliberatly
set GROUP_OBJ and CLASS_OBJ perms to new group perms. Add comment
to explain why.
* security.cc (set_created_file_access): Ditto.
* setfacl.c: Align more to Linux tool.
(delacl): New function to delete acl entries only.
(modacl): Drop delete functionality. Add handling of recomputing the
mask and default mask values.
(delallacl): Rename from delacl.
(setfacl): Call delacl in Delete case. Call delallacl in DeleteAll
and DeleteDef case.
(usage): Accommodate new options. Rearrange and rephrase slightly.
(longopts): Emit 'x' in --delete case. Add --no-mask and --mask
options.
(opts): Add -x and -n options.
(main): Handle -d and -x the same. Handle -n and --mask options.
Drop handling for -r option.
* getfacl.c (usage): Align more closely to Linux version. Add new
options -c, -e, -E. Change formatting to accommodate longer options.
(longopts): Rename --noname to --numeric. Keep --noname for backward
compatibility. Add --omit-header, --all-effective and --no-effective
options.
(opts): Add -c, -e and -E option.
(main): Handle new -c, -e, and -E options.
Fix pty permssion handling in new permission handling code
* sec_acl.cc (set_posix_access): Always make sure Admins have
WRITE_DAC and WRITE_OWNER permissions.
* security.h (create_object_sd_from_attribute): Drop handle parameter
from prototype.
* security.cc (create_object_sd_from_attribute): Drop handle parameter.
Just create the standard POSIXy security descriptor.
(set_object_attribute): Accommodate dropped paramter in call to
create_object_sd_from_attribute.
* fhandler_tty.cc: Ditto, throughout.
First cut of full implementation of new permission handling
* fhandler.cc (fhandler_base::open_with_arch): Call open with mode
not umasked.
(fhandler_base::open): Explicitely umask mode on NFS here. Call new
set_created_file_access rather than set_file_attribute.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Reimplement
setting permissions on filesystems supporting ACLs using the new
set_posix_access call.
(fhandler_disk_file::fchown): Ditto.
(fhandler_disk_file::mkdir): Call new set_created_file_access rather
than set_file_attribute.
* fhandler_socket.cc (fhandler_socket::bind): Don't umask here. Add
WRITE_OWNER access to allow writing group in case of SGID bit set.
Call new set_created_file_access rather than set_file_attribute.
* path.cc (symlink_worker): Call new set_created_file_access rather
than set_file_attribute.
* sec_acl.cc (searchace): Un-staticize.
(set_posix_access): New, complementary functionality to
get_posix_access.
(setacl): Implement in terms of get_posix_access/set_posix_access.
(get_posix_access): Add handling for just created files requiring
their first Cygwin ACL. Fix new_style recognition. Handle SGID
bit. For old-style ACLs, ignore SYSTEM and Administrators when
computing the {DEF_}CLASS_OBJ perms.
* security.cc (get_file_sd): Revamp comment. Change and (hopefully)
speed up inheritance processing for just created files.
(alloc_sd): Remove.
(set_security_attribute): Call set_posix_access instead of alloc_sd.
(get_object_attribute): Fix return value.
(create_object_sd_from_attribute): Call set_posix_access instead of
alloc_sd.
(set_file_attribute): Remove.
(set_created_file_access): New function implemented in terms of
get_posix_access/set_posix_access.
* security.h (set_file_attribute): Remove prototype.
(set_created_file_access): Add prototype.
(searchace): Ditto.
(set_posix_access): Ditto.
* syscalls.cc (open): Call open_with_arch with mode not umasked.
* pwdgrp.h (sidfromuid): New inline function.
(sidfromgid): Ditto.
* fhandler_disk_file.cc (fhandler_disk_file::fchown): Use sidfromuid.
* quotactl.cc (quotactl): Use sidfromuid and sidfromgid.
* sec_acl.cc: Change preceeding comment explaining new-style ACLs.
Describe how to generate deny ACEs in more detail. Accommodate the
fact that a NULL deny ACE is used for {DEF_}CLASS_OBJ, rather than
a special Cygwin ACE. Improve further comments.
(CYG_ACE_NEW_STYLE): Define.
(get_posix_access): Change from Cygwin ACE to NULL deny ACE. Fix
CLASS_OBJ handling to generate CLASS_OBJ and DEF_CLASS_OBJ from a single
NULL deny ACE if the inheritance flags say so.
* sec_helper.cc (well_known_cygwin_sid): Remove.
* security.h (well_known_cygwin_sid): Drop declaration.
Jon TURNEY [Sat, 4 Apr 2015 22:31:03 +0000 (23:31 +0100)]
Compile exceptions.cc with -fno-omit-frame-pointer on x86
Selectively using -fomit-frame-pointer when -O is used doesn't make sense
anymore, apparently since gcc 4.6, -O implies -fomit-frame-pointer.
exceptions.cc must be compiled with -fno-omit-frame-pointer on x86, as it uses
RtlCaptureContext, which requires a frame pointer.
* Makefile.in : Remove setting -fomit-frame-pointer for compiling
various files, it is already the default. Set
-fno-omit-frame-pointer for exceptions.cc on x86.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Add FAQ entry on how Cygwin counters install and update MITM attacks
* faq-setup.xml: Document how Cygwin secures installation and
update against man-in-the-middle (MITM) attacks. Note that
setup embeds a public key to check the signature of setup.ini,
and that setup.ini includes SHA-512 cryptographic hashes.
Signed-off-by: David A. Wheeler <dwheeler@dwheeler.com>
Drop local stdint.h and inttypes.h in favor of newlib files
* include/cygwin/types.h: Include sys/_stdint.h rather than stdint.h.
* include/stdint.h: Drop in favor of newlib version.
* include/inttypes.h: Ditto.
Jon TURNEY [Mon, 30 Mar 2015 19:31:13 +0000 (20:31 +0100)]
Provide ucontext to signal handlers
Add ucontext.h header, defining ucontext_t and mcontext_t types.
Provide sigaction sighandlers with a ucontext_t parameter, containing stack and
context information.
* include/sys/ucontext.h : New header.
* include/ucontext.h : Ditto.
* exceptions.cc (call_signal_handler): Provide ucontext_t
parameter to signal handler function.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Jon TURNEY [Mon, 30 Mar 2015 19:56:03 +0000 (20:56 +0100)]
Add cygwin_internal() operation to retrieve the EXCEPTION_RECORD from a siginfo_t *
* external.cc (cygwin_internal): Add operation to retrieve a copy
of the EXCEPTION_RECORD from a siginfo_t *.
* include/sys/cygwin.h (cygwin_getinfo_types): Ditto.
* exception.h (cygwin_exception): Add exception_record accessor.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Jon TURNEY [Mon, 30 Mar 2015 17:05:51 +0000 (18:05 +0100)]
Rename struct ucontext to struct __mcontext
* include/cygwin/signal.h : Rename struct ucontext to struct
__mcontext. Fix layout differences from the Win32 API CONTEXT
type. Remove unused member _internal. Rename member which
corresponds to ContextFlags. Add cr2 member.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Corinna Vinschen [Mon, 30 Mar 2015 16:05:06 +0000 (18:05 +0200)]
Try best to handle user from domain not in trusted domain list.
* cygheap.h (cygheap_domain_info::add_domain): Add prototype.
* uinfo.cc (cygheap_domain_info::add_domain): New method.
(pwdgrp::fetch_account_from_windows): Try to add domain explicitely
if it was not in the original list of trusted domains and go ahead
rather than bailing out. Add comment to explain why.
Corinna Vinschen [Mon, 30 Mar 2015 14:53:52 +0000 (16:53 +0200)]
Prepare to rename/reuse struct ucontext.
* cygtls.h (struct _cygtls): Convert thread_context to type CONTEXT.
* exceptions.cc (_cygtls::signal_debugger): Use sizeof (CONTEXT) for
size of CONTEXT copied for GDB's digestion.
* include/cygwin/signal.h: Add a preliminary comment.
Takashi Yano [Wed, 25 Mar 2015 11:42:38 +0000 (20:42 +0900)]
TIOCPKT mode of PTY is broken if ONLCR bit is cleared.
* tty.h (class tty_min): Remove variable "write_error" to which any
errors are not currently set at anywhere.
(class tty): Add variable "column" for handling ONOCR.
* tty.cc (tty::init): Add initialization code for variable "column".
* fhandler.h (class fhandler_pty_master): Remove variable "need_nl"
which is not necessary any more. "need_nl" was needed by OPOST process
in fhandler_pty_master::process_slave_output().
(class fhandler_pty_common): Add function process_opost_output() for
handling post processing for OPOST in write process.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Count
TIOCPKT control byte into length to be read in TIOCPKT mode. Move
post processing for OPOST to write process. Remove code related to
variable "write_error". Return with EIO error if slave is already
closed.
(fhandler_pty_master::fhandler_pty_master): Remove initialization
code for variable "need_nl".
(fhandler_pty_common::process_opost_output): Add this function for
handling of OPOST in write process. Add code to avoid blocking in
non-blocking mode when output is suspended by ^S.
(fhandler_pty_slave::write): Call fhandler_pty_common::
process_opost_output() instead of WriteFile(). Remove code related to
variable "write_error".
(fhandler_pty_master::doecho): Call fhandler_pty_common::
process_opost_output() instead of WriteFile().
* select.cc (peek_pipe): Remove code related to variable "need_nl".
Corinna Vinschen [Tue, 24 Mar 2015 09:42:45 +0000 (10:42 +0100)]
Ignore __STDC_{FORMAT,LIMIT,CONSTANT}_MACROS
Per glibc BZ #15366:
* inttypes.h: Drop __STDC_FORMAT_MACROS consideration.
* stdint.h: Drop __STDC_LIMIT_MACROS and __STDC_CONSTANT_MACROS
consideration.
Joel Sherrill [Wed, 18 Mar 2015 20:44:41 +0000 (15:44 -0500)]
Change from configure time to compile time probe for intptr_t definition.
2015-03-23 Joel Sherrill <joel.sherrill@oarcorp.com
* configure.in: Delete logic to determine _UINTPTR_EQ_ULONGLONG
and _UINTPTR_EQ_ULONG at configuration time.
*libc/include/sys/config.h: Add logic to determine
_UINTPTR_EQ_ULONGLONG and _UINTPTR_EQ_ULONG at compilation time.
* libc/include/inttypes.h: Add include of <sys/config.h>.
* configure: Regenerated.
Corinna Vinschen [Thu, 19 Mar 2015 17:27:03 +0000 (18:27 +0100)]
Handle S_ISGID bit and multiple ACEs for owner
* sec_acl.cc (get_posix_access): Handle multiple ACEs for the
owner and primary group of the file. Handle the default primary
group ACE as DEF_GROUP_OBJ entry if the directory has the S_ISGID bit
set. Add comments. Minor code rearrangements.