Improve libmvec benchmark integration so that in future other
architectures may be able to run their libmvec benchmarks as well. This
now allows libmvec benchmarks to be run with `make BENCHSET=bench-math`.
The libmvec benchmarks print a message indicating that a certain CPU
feature is unsupported and exit prematurelyi, which breaks the JSON in
bench.out.
Handle this more elegantly in the bench makefile target by adding
support for an UNSUPPORTED exit status (77) so that bench.out continues
to have output for valid tests.
Alan Modra [Wed, 27 Apr 2022 05:09:10 +0000 (14:39 +0930)]
Use __ehdr_start rather than _begin in _dl_start_final
__ehdr_start is already used in rltld.c:dl_main, and can serve the
same purpose as _begin. Besides tidying the code, using linker
defined section relative symbols rather than "-defsym _begin=0" better
reflects the intent of _dl_start_final use of _begin, which is to
refer to the load address of ld.so rather than absolute address zero.
sysdeps: Add 'get_fast_jitter' interace in fast-jitter.h
'get_fast_jitter' is meant to be used purely for performance
purposes. In all cases it's used it should be acceptable to get no
randomness (see default case). An example use case is in setting
jitter for retries between threads at a lock. There is a
performance benefit to having jitter, but only if the jitter can
be generated very quickly and ultimately there is no serious issue
if no jitter is generated.
The implementation generally uses 'HP_TIMING_NOW' iff it is
inlined (avoid any potential syscall paths). Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Benchmark for testing pthread mutex locks performance with different
threads and critical sections.
The test configuration consists of 3 parts:
1. thread number
2. critical-section length
3. non-critical-section length
Thread number starts from 1 and increased by 2x until num of CPU cores
(nprocs). An additional over-saturation case (1.25 * nprocs) is also
included.
Critical-section is represented by a loop of shared do_filler(),
length can be determined by the loop iters.
Non-critical-section is similiar to the critical-section, except it's
based on non-shared do_filler().
elf: Fix DFS sorting algorithm for LD_TRACE_LOADED_OBJECTS with missing libraries (BZ #28868)
On _dl_map_object the underlying file is not opened in trace mode
(in other cases where the underlying file can't be opened,
_dl_map_object quits with an error). If there any missing libraries
being processed, they will not be considered on final nlist size
passed on _dl_sort_maps later in the function. And it is then used by
_dl_sort_maps_dfs on the stack allocated working maps:
222 /* Array to hold RPO sorting results, before we copy back to maps[]. */
223 struct link_map *rpo[nmaps];
224
225 /* The 'head' position during each DFS iteration. Note that we start at
226 one past the last element due to first-decrement-then-store (see the
227 bottom of above dfs_traversal() routine). */
228 struct link_map **rpo_head = &rpo[nmaps];
However while transversing the 'l_initfini' on dfs_traversal it will
still consider the l_faked maps and thus update rpo more times than the
allocated working 'rpo', overflowing the stack object.
As suggested in bugzilla, one option would be to avoid sorting the maps
for trace mode. However I think ignoring l_faked object does make
sense (there is one less constraint to call the sorting function), it
allows a slight less stack usage for trace, and it is slight simpler
solution.
The tests does trigger the stack overflow, however I tried to make
it more generic to check different scenarios or missing objects.
H.J. Lu [Thu, 14 Apr 2022 17:46:53 +0000 (10:46 -0700)]
elf: Add more DT_RELR tests
Verify that:
1. A DT_RELR shared library without DT_NEEDED works.
2. A DT_RELR shared library without DT_VERNEED works.
3. A DT_RELR shared library without libc.so on DT_NEEDED works.
H.J. Lu [Tue, 4 Jan 2022 13:47:21 +0000 (05:47 -0800)]
elf: Properly handle zero DT_RELA/DT_REL values
With DT_RELR, there may be no relocations in DT_RELA/DT_REL and their
entry values are zero. Don't relocate DT_RELA/DT_REL and update the
combined relocation start address if their entry values are zero.
Fangrui Song [Wed, 5 Jan 2022 02:41:03 +0000 (18:41 -0800)]
elf: Support DT_RELR relative relocation format [BZ #27924]
PIE and shared objects usually have many relative relocations. In
2017/2018, SHT_RELR/DT_RELR was proposed on
https://groups.google.com/g/generic-abi/c/bX460iggiKg/m/GxjM0L-PBAAJ
("Proposal for a new section type SHT_RELR") and is a pre-standard. RELR
usually takes 3% or smaller space than R_*_RELATIVE relocations. The
virtual memory size of a mostly statically linked PIE is typically 5~10%
smaller.
---
Notes I will not include in the submitted commit:
Available on https://sourceware.org/git/?p=glibc.git;a=shortlog;h=refs/heads/maskray/relr
"pre-standard": even Solaris folks are happy with the refined generic-abi
proposal. Cary Coutant will apply the change
https://sourceware.org/pipermail/libc-alpha/2021-October/131781.html
This patch is simpler than Chrome OS's glibc patch and makes ELF_DYNAMIC_DO_RELR
available to all ports. I don't think the current glibc implementation
supports ia64 in an ELFCLASS32 container. That said, the style I used is
works with an ELFCLASS32 container for 64-bit machine if ElfW(Addr) is
64-bit.
* Chrome OS folks have carried a local patch since 2018 (latest version:
https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/refs/heads/main/sys-libs/glibc/files/local/glibc-2.32).
I.e. this feature has been battle tested.
* Android bionic supports 2018 and switched to DT_RELR==36 in 2020.
* The Linux kernel has supported CONFIG_RELR since 2019-08
(https://git.kernel.org/linus/5cf896fb6be3effd9aea455b22213e27be8bdb1d).
* A musl patch (by me) exists but is not applied:
https://www.openwall.com/lists/musl/2019/03/06/3
* rtld-elf from FreeBSD 14 will support DT_RELR.
I believe upstream glibc should support DT_RELR to benefit all Linux
distributions. I filed some feature requests to get their attention:
As of linker support (to the best of my knowledge):
* LLD support DT_RELR.
* https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/refs/heads/main/sys-devel/binutils/files/
has a gold patch.
* GNU ld feature request https://sourceware.org/bugzilla/show_bug.cgi?id=27923
Changes from the original patch:
1. Check the linker option, -z pack-relative-relocs, which add a
GLIBC_ABI_DT_RELR symbol version dependency on the shared C library if
it provides a GLIBC_2.XX symbol version.
2. Change make variale to have-dt-relr.
3. Rename tst-relr-no-pie to tst-relr-pie for --disable-default-pie.
4. Use TEST_VERIFY in tst-relr.c.
5. Add the check-tst-relr-pie.out test to check for linker generated
libc.so version dependency on GLIBC_ABI_DT_RELR.
6. Move ELF_DYNAMIC_DO_RELR before ELF_DYNAMIC_DO_REL.
H.J. Lu [Fri, 19 Nov 2021 14:18:56 +0000 (06:18 -0800)]
Add GLIBC_ABI_DT_RELR for DT_RELR support
The EI_ABIVERSION field of the ELF header in executables and shared
libraries can be bumped to indicate the minimum ABI requirement on the
dynamic linker. However, EI_ABIVERSION in executables isn't checked by
the Linux kernel ELF loader nor the existing dynamic linker. Executables
will crash mysteriously if the dynamic linker doesn't support the ABI
features required by the EI_ABIVERSION field. The dynamic linker should
be changed to check EI_ABIVERSION in executables.
Add a glibc version, GLIBC_ABI_DT_RELR, to indicate DT_RELR support so
that the existing dynamic linkers will issue an error on executables with
GLIBC_ABI_DT_RELR dependency. When there is a DT_VERNEED entry with
libc.so on DT_NEEDED, issue an error if there is a DT_RELR entry without
GLIBC_ABI_DT_RELR dependency.
Support __placeholder_only_for_empty_version_map as the placeholder symbol
used only for empty version map to generate GLIBC_ABI_DT_RELR without any
symbols.
Fangrui Song [Tue, 26 Apr 2022 16:26:22 +0000 (09:26 -0700)]
elf: Replace PI_STATIC_AND_HIDDEN with opposite HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
Carlos O'Donell [Tue, 26 Apr 2022 14:52:41 +0000 (10:52 -0400)]
i386: Regenerate ulps
These failures were caught while building glibc master for Fedora
Rawhide which is built with '-mtune=generic -msse2 -mfpmath=sse'
using gcc 11.3 (gcc-11.3.1-2.fc35) on a Cascadelake Intel Xeon
processor.
dlfcn: Do not use rtld_active () to determine ld.so state (bug 29078)
When audit modules are loaded, ld.so initialization is not yet
complete, and rtld_active () returns false even though ld.so is
mostly working. Instead, the static dlopen hook is used, but that
does not work at all because this is not a static dlopen situation.
Commit 466c1ea15f461edb8e3ffaf5d86d708876343bbf ("dlfcn: Rework
static dlopen hooks") moved the hook pointer into _rtld_global_ro,
which means that separate protection is not needed anymore and the
hook pointer can be checked directly.
The guard for disabling libio vtable hardening in _IO_vtable_check
should stay for now.
Fangrui Song [Mon, 25 Apr 2022 17:30:26 +0000 (10:30 -0700)]
elf: Move post-relocation code of _dl_start into _dl_start_final
On non-PI_STATIC_AND_HIDDEN architectures, getting the address of
_rtld_local_ro (for GLRO (dl_final_object)) goes through a GOT entry.
The GOT load may be reordered before self relocation, leading to an
unrelocated/incorrect _rtld_local_ro address.
Move code after self relocation into _dl_start_final to avoid the
reordering. This fixes powerpc32 and may help other architectures when
ELF_DYNAMIC_RELOCATE is simplified in the future.
Joan Bruguera [Mon, 11 Apr 2022 17:49:56 +0000 (19:49 +0200)]
misc: Fix rare fortify crash on wchar funcs. [BZ 29030]
If `__glibc_objsize (__o) == (size_t) -1` (i.e. `__o` is unknown size), fortify
checks should pass, and `__whatever_alias` should be called.
Previously, `__glibc_objsize (__o) == (size_t) -1` was explicitly checked, but
on commit a643f60c53876b, this was moved into `__glibc_safe_or_unknown_len`.
A comment says the -1 case should work as: "The -1 check is redundant because
since it implies that __glibc_safe_len_cond is true.". But this fails when:
* `__s > 1`
* `__osz == -1` (i.e. unknown size at compile time)
* `__l` is big enough
* `__l * __s <= __osz` can be folded to a constant
(I only found this to be true for `mbsrtowcs` and other functions in wchar2.h)
In this case `__l * __s <= __osz` is false, and `__whatever_chk_warn` will be
called by `__glibc_fortify` or `__glibc_fortify_n` and crash the program.
This commit adds the explicit `__osz == -1` check again.
moc crashes on startup due to this, see: https://bugs.archlinux.org/task/74041
Minimal test case (test.c):
#include <wchar.h>
int main (void)
{
const char *hw = "HelloWorld";
mbsrtowcs (NULL, &hw, (size_t)-1, NULL);
return 0;
}
Build with:
gcc -O2 -Wp,-D_FORTIFY_SOURCE=2 test.c -o test && ./test
1. Use json-lib for printing results.
2. Expose all parameters (before pos, seek_char, and max_char where
not printed).
3. Add benchmarks that test multiple occurence of seek_char in the
string. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
Hopefully, this will lead to tests that are easier to maintain. The
current approach of parsing readelf -W output using regular expressions
is not necessarily easier than parsing the ELF data directly.
This module is still somewhat incomplete (e.g., coverage of relocation
types and versioning information is missing), but it is sufficient to
perform basic symbol analysis or program header analysis.
The EM_* mapping for architecture-specific constant classes (e.g.,
SttX86_64) is not yet implemented. The classes are defined for the
benefit of elf/tst-glibcelf.py.
elf_dynamic_do_Rel checks RTLD_BOOTSTRAP in several #ifdef branches.
Create an outside RTLD_BOOTSTRAP branch to simplify reasoning about the
function at the cost of a few duplicate lines.
Since dl_naudit is zero in RTLD_BOOTSTRAP code, the RTLD_BOOTSTRAP
branch can avoid _dl_audit_symbind calls to decrease code size.
Fangrui Song [Wed, 20 Apr 2022 17:24:15 +0000 (10:24 -0700)]
m68k: Handle fewer relocations for RTLD_BOOTSTRAP (#BZ29071)
m68k is a non-PI_STATIC_AND_HIDDEN arch which uses a GOT relocation when
loading the address of a jump table. The GOT load may be reordered
before processing R_68K_RELATIVE relocations, leading to an
unrelocated/incorrect jump table, which will cause a crash.
The foolproof approach is to add an optimization barrier (e.g. calling
an non-inlinable function after relative relocations are resolved). That
is non-trivial given the current code structure, so just use the simple
approach to avoid the jump table: handle only the essential reloctions
for RTLD_BOOTSTRAP code.
This is based on Andreas Schwab's patch and fixed ld.so crash on m68k.
The 404656009b reversion did not setup the atomic loop to set the
cancel bits correctly. The fix is essentially what pthread_cancel
did prior 26cfbb7162ad.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Fangrui Song [Tue, 19 Apr 2022 22:52:27 +0000 (15:52 -0700)]
elf: Remove __libc_init_secure
After 73fc4e28b9464f0e13edc719a5372839970e7ddb,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from 22b79ed7f413cd980a7af0cf258da5bf82b6d5e5.
This is because A) the checks in range [65, 96] are now unrolled 2x
and B) because smaller values <= 16 are now given a hotter path. By
contrast the SSE4 version has a branch for Size = 80. The unrolled
version has get better performance for returns which need both
comparisons.
It also handles the highly unlikely case where localtime might return
NULL, in this case only the PRI is set to hopefully instruct the relay
to get eh TIMESTAMP (as defined by the RFC).
misc: syslog: Move SYSLOG_NAME to USE_MISC (BZ #16355)
There is no easy solution as described on first comment in bug report,
and some code (like busybox) assumes facilitynames existance when
SYSLOG_NAMES is defined (so we can't just remove it as suggested in
comment #2).
So use the easier solution and guard it with __USE_MISC.
misc: syslog: Use fixed-sized buffer and remove memstream
A fixed-sized buffer is used instead of memstream for messages up to
1024 bytes to avoid the potential BUFSIZ (8K) malloc and free for
each syslog call.
Also, since the buffer size is know, memstream is replaced with a
malloced buffer for larger messages.
Use a temporary buffer for strftime instead of using internal libio
members, simplify fprintf call on the memstream and memory allocation,
use %b instead of %h, use dprintf instead of writev for LOG_PERROR.
- All possible priorities and facilities through TCP and UDP.
- Same syslog tests for vsyslog.
- Some openlog/syslog/close combinations.
- openlog with LOG_CONS, LOG_PERROR, and LOG_PID.
Internally is done with a test-container where the main process mimics
the syslog server interface.
The test does not cover multithread and async-signal usage.
The goal is to remove most SSSE3 function as SSE4, AVX2, and EVEX are
generally preferable. memcpy/memmove is one exception where avoiding
unaligned loads with `palignr` is important for some targets.
This commit replaces memmove-ssse3 with a better optimized are lower
code footprint verion. As well it aliases memcpy to memmove.
Aside from this function all other SSSE3 functions should be safe to
remove.
The performance is not changed drastically although shows overall
improvements without any major regressions or gains.
bench-memcpy geometric_mean(N=50) New / Original: 0.957
bench-memcpy-random geometric_mean(N=50) New / Original: 0.912
bench-memcpy-large geometric_mean(N=50) New / Original: 0.892
Benchmarks where run on Zhaoxin KX-6840@2000MHz See attached numbers
for all results.
More important this saves 7246 bytes of code size in memmove an
additional 10741 bytes by reusing memmove code for memcpy (total 17987
bytes saves). As well an additional 896 bytes of rodata for the jump
table entries.
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
With SSE2, SSE4.1, AVX2, and EVEX versions very few targets prefer
SSSE3. As a result it is no longer worth it to keep the SSSE3
versions given the code size cost. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
nptl: Handle spurious EINTR when thread cancellation is disabled (BZ#29029)
Some Linux interfaces never restart after being interrupted by a signal
handler, regardless of the use of SA_RESTART [1]. It means that for
pthread cancellation, if the target thread disables cancellation with
pthread_setcancelstate and calls such interfaces (like poll or select),
it should not see spurious EINTR failures due the internal SIGCANCEL.
However recent changes made pthread_cancel to always sent the internal
signal, regardless of the target thread cancellation status or type.
To fix it, the previous semantic is restored, where the cancel signal
is only sent if the target thread has cancelation enabled in
asynchronous mode.
The cancel state and cancel type is moved back to cancelhandling
and atomic operation are used to synchronize between threads. The
patch essentially revert the following commits:
8c1c0aae20 nptl: Move cancel type out of cancelhandling 2b51742531 nptl: Move cancel state out of cancelhandling 26cfbb7162 nptl: Remove CANCELING_BITMASK
However I changed the atomic operation to follow the internal C11
semantic and removed the MACRO usage, it simplifies a bit the
resulting code (and removes another usage of the old atomic macros).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
and powerpc64-linux-gnu.
Stefan Liebler [Wed, 13 Apr 2022 12:36:09 +0000 (14:36 +0200)]
S390: Add new s390 platform z16.
The new IBM z16 is added to platform string array.
The macro _DL_PLATFORMS_COUNT is incremented.
_dl_hwcaps_subdir is extended by "z16" if HWCAP_S390_VXRS_PDE2
is set. HWCAP_S390_NNPA is not tested in _dl_hwcaps_subdirs_active
as those instructions may be replaced or removed in future.
tst-glibc-hwcaps.c is extended in order to test z16 via new marker5.
A fatal glibc error is dumped if glibc was build with architecture
level set for z16, but run on an older machine. (See dl-hwcap-check.h)
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
elf: Fix memory leak in _dl_find_object_update (bug 29062)
The count can be zero if an object has already been loaded as
an indirect dependency (so that l_searchlist.r_list in its link
map is still NULL) is promoted to global scope via RTLD_GLOBAL.
Carlos O'Donell [Tue, 12 Apr 2022 17:26:10 +0000 (13:26 -0400)]
NEWS: Move PLT tracking slowdown to glibc 2.35.
In commit 063f9ba220f434c7f30dd65c4cff17c0c458a7cf the NEWS section
was accidentally added to the glibc 2.34 NEWS section. The NEWS entry
should have been added to glibc 2.35 which contained the committed
fix. This moves the NEWS entry to correct section.
Went with version >= 11.0 since it covers most of the major features
and should be pretty universally accessibly.
There are some issues:
1. indention of preprocessor directives:
Unfortunately there doesn't appear to be a switch for a seperate
'IndentWidth' for preprocessor directives vs. normal code so we
are stuck either not indenting the directives or over-indenting
them. i.e:
Desired:
```
#ifndef A
# define B
#endif
```
Options:
```
#ifndef A
# define B /* Two spaces instead of one. */
#endif
#ifndef C
#define D /* No spaces. */
#endif
```
Chose to over-indent as it generally seems easier to script
halving all pre-processor indentations than counting the nested
depth and indenting from scratch.
2. concatenation of lines missing semi-colons:
Throughout glibc there are macros used to setup aliasing that are
outside of functions and don't end in semi-colons i.e:
```
libc_hidden_def (__pthread_self)
weak_alias (__pthread_self, pthread_self)
```
clang-format reformats lines like these to:
```
libc_hidden_def (__pthread_self) weak_alias (__pthread_self, pthread_self)
```
which is generally undesirable.
Other than those two big concerns there are certainly some questions
diffs but for the most part it creates a easy to read and consistent
style. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tom Coldrick [Tue, 5 Apr 2022 09:46:54 +0000 (10:46 +0100)]
manual: Avoid name collision in libm ULP table [BZ #28956]
The 32-bit and 64-bit variants of RISC-V share the same name - "RISC-V"
- when generating the libm error table for the info pages. This
collision, and the way how the table is generated, mean that the values
in the final table for "RISC-V" may be either for the 32- or 64-bit
variant, with no indication as to which.
As an additional side-effect, this makes the build non-reproducible, as
the error table generated is dependent upon the host filesystem
implementation.
To solve this issue, the libm-test-ulps-name files for both variants
have been modified to include their word size, so as to remove the
collision and provide more accurate information in the table.
An alternative proposed was to merge the two variants' ULP values into a
single file, but this would mean that information about error values is
lost, as the two variants are not identical. Some differences are
considerable, notably the values for the exp() function are large.
Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
Alan Modra [Sun, 23 Jan 2022 23:55:49 +0000 (10:25 +1030)]
powerpc: Relocate stinfo->main
start_addresses in sysdeps/powerpc/powerpc64/start.S is historical
baggage that should disappear. Until someone does that, relocating
stinfo->main by hand is one solution to the fact that the field may be
unrelocated at the time it is accessed. This is similar to what is
done for dynamic tags via the D_PTR macro. stinfo->init and
stinfo->fini are zero in both powerpc64/start.S and powerpc32/start.S,
so make it a little more obvious they are unused by passing NULLs to
LIBC_START_MAIN. The makefile change is needed to pick up
elf/dl-static-tls.h from dl-machine.h.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Alan Modra [Sun, 23 Jan 2022 21:28:18 +0000 (07:58 +1030)]
powerpc64: Set up thread register for _dl_relocate_static_pie
libgcc ifunc resolvers that access hwcap via a field in the tcb can't
be called until the thread pointer is set up. Other ifunc resolvers
might need access to at_platform. This patch sets up a fake thread
pointer early to a copy of tcbhead_t. hwcapinfo.c already had local
variables for hwcap and at_platform, replace them with an entire
tcbhead_t. It's not that large and this way we easily ensure hwcap
and at_platform are at the same relative offsets as they are in the
real thread block.
The patch also conditionally disables part of tst-tlsifunc-static,
"bar address read from IFUNC resolver is incorrect". We can't get a
proper address for a thread variable before glibc initialises tls.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Alan Modra [Sat, 22 Jan 2022 01:18:50 +0000 (11:48 +1030)]
powerpc64: Use medium model toc accesses throughout
The PowerPC64 linker edits medium model toc-indirect code to toc-pointer
relative:
addis r9,r2,tc_entry_for_var@toc@ha
ld r9,tc_entry_for_var@toc@l(r9)
becomes
addis r9,r2,(var-.TOC.)@ha
addi r9,r9,(var-.TOC.)@l
when "var" is known to be local to the binary. This isn't done for
small-model toc-indirect code, because "var" is almost guaranteed to
be too far away from .TOC. for a 16-bit signed offset. And, because
the analysis of which .toc entry can be removed becomes much more
complicated in objects that mix code models, they aren't removed if
any small-model toc sequence appears in an object file.
Unfortunately, glibc's build of ld.so smashes the needed objects
together in a ld -r linking stage. This means the GOT/TOC is left
with a whole lot of relative relocations which is untidy, but in
itself is not a serious problem. However, static-pie on powerpc64
bombs due to a segfault caused by one of the small-model accesses
before _dl_relocate_static_pie. (The very first one in rcrt1.o
passing start_addresses in r8 to __libc_start_main.)
So this patch makes all the toc/got accesses in assembly medium code
model, and a couple of functions hidden. By itself this is not
enough to give us working static-pie, but it is useful in isolation to
enable better linker optimisation.
There's a serious problem in libgcc too. libgcc ifuncs access the
AT_HWCAP words stored in the tcb with an offset from the thread
pointer (r13), but r13 isn't set at the time _dl_relocate_static_pie.
A followup patch will fix that.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Alan Modra [Sat, 22 Jan 2022 03:02:39 +0000 (13:32 +1030)]
linux: Constify rfv variable in dl_vdso_vsym
Compilers may decide to put the rfv variable in .data rather than on
the stack. It's slightly better to put it in .data.rel.ro.local
instead. Regardles of that, making it const may enable further
optimisations. Found when examining relative relocations (GOT ones
in particular) as part of enabling static-pie for PowerPC64.
The comments on strlen() don't match what the actual code does. They
describe an older algorithm which is no longer in use. This change
replace the old comments with new ones describing the algorithm used.
I am a first time contributor, and I believe there is no need for
copyright assignment, since the file changed is not in the shared
source files list.
This patch only changes comments, but for safety I have run the tests in
my x64 ubuntu machine, with the following results:
Summary of test results:
5051 PASS
80 UNSUPPORTED
16 XFAIL
6 XPASS
Stefan Liebler [Thu, 7 Apr 2022 11:59:48 +0000 (13:59 +0200)]
S390: Fix elf/tst-audit25[ab]
If glibc is configured with --disable-default-pie and build on
s390 with -O3, the tests elf/tst-audit25a and elf/tst-audit25b are
failing as there are additional la_symbind lines for free and malloc.
It turns out that those belong to the executable. In fact those are
the PLT-stubs. Furthermore la_symbind is also called for calloc and
realloc symbols, but those belong to libc.
Those functions are not called at all, but dlsym'ed in
elf/dl-minimal.c:
__rtld_malloc_init_real (struct link_map *main_map)
{
...
void *new_calloc = lookup_malloc_symbol (main_map, "calloc", &version);
void *new_free = lookup_malloc_symbol (main_map, "free", &version);
void *new_malloc = lookup_malloc_symbol (main_map, "malloc", &version);
void *new_realloc = lookup_malloc_symbol (main_map, "realloc", &version);
...
}
Therefore, this commit just ignored symbols with LA_SYMB_DLSYM flag. Reviewed-by: Adheemrval Zanella <adhemerval.zanella@linaro.org>
In most cases the simple/stupid/builtin functions were in there to
benchmark optimized implementations against. Only in some cases the
functions are used to check expected results.
Remove these tests from IMPL() and only keep them in wherever they're
used for a specific purpose, e.g. to generate expected results.
This improves timing of `make subdirs=string` by over a minute and a
half (over 15%) on a Whiskey Lake laptop.
test-memcpy: Actually reverse source and destination
Looks like an oversight in memcpy tests resulted in s2 and s1 not being
swapped for the second iteration of the memcpy test. Fix it. Also fix
a formatting nit.
linux: Fix __closefrom_fallback iterates until max int (BZ#28993)
The __closefrom_fallback tries to get a available file descriptor
if the initial open ("/proc/self/fd/", ...) fails. It assumes the
failure would be only if procfs is not mount (ENOENT), however if
the the proc file is not accessible (due some other kernel filtering
such apparmor) it will iterate over a potentially large file set
issuing close calls.
It should only try the close fallback if open returns EMFILE,
ENFILE, or ENOMEM.
Fangrui Song [Tue, 5 Apr 2022 00:19:07 +0000 (17:19 -0700)]
Remove -z combreloc and HAVE_Z_COMBRELOC
-z combreloc has been the default regadless of the architecture since
binutils commit f4d733664aabd7bd78c82895e030ec9779a92809 (2002). The
configure check added in commit fdde83499a05 (2001) has long been
unneeded.
We can therefore treat HAVE_Z_COMBRELOC as always 1 and delete dead code
paths in dl-machine.h files (many were copied from commit a711b01d34ca
and ee0cb67ec238).
DJ Delorie [Tue, 29 Mar 2022 03:53:33 +0000 (23:53 -0400)]
Allow for unpriviledged nested containers
If the build itself is run in a container, we may not be able to
fully set up a nested container for test-container testing.
Notably is the mounting of /proc, since it's critical that it
be mounted from within the same PID namespace as its users, and
thus cannot be bind mounted from outside the container like other
mounts.
This patch defaults to using the parent's PID namespace instead of
creating a new one, as this is more likely to be allowed.
If the test needs an isolated PID namespace, it should add the "pidns"
command to its init script.
Szabolcs Nagy [Tue, 29 Mar 2022 08:50:23 +0000 (09:50 +0100)]
Increase the test timeout of some string tests
Recent changes in test-strncasecmp and test-strncmp pushed the run time
of the tests above the 4 minute limit specified in test-string.h on an
arm tester machine.
realpath: Bring back GNU extension on ENOENT and EACCES [BZ #28996]
The GNU extension for realpath states that if the path resolution fails
with ENOENT or EACCES and the resolved buffer is non-NULL, it will
contain part of the path that failed resolution.
commit 949ad78a189194048df8a253bb31d1d11d919044 broke this when it
omitted the copy on failure. Bring it back partially to continue
supporting this GNU extension.
Resolves: BZ #28996
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>