Joseph Myers [Thu, 22 Aug 2024 11:25:14 +0000 (11:25 +0000)]
Test mkdirat use of mode argument
The test io/tst-mkdirat doesn't verify the permissions on the created
directory (thus, doesn't verify at all anything about how mkdirat uses
the mode argument). Add checks of this to the existing test.
Joseph Myers [Wed, 21 Aug 2024 19:58:14 +0000 (19:58 +0000)]
Add more tests of getline
There is very little test coverage for getline (only a minimal
stdio-common/tstgetln.c which doesn't verify anything about the
results of the getline calls). Add some more thorough tests
(generally using fopencookie for convenience in testing various cases
for what the input and possible errors / EOF in the file read might
look like).
Note the following regarding testing of error cases:
* Nothing is said in the specifications about what if anything might
be written into the buffer, and whether it might be reallocated, in
error cases. The expectation of the tests (required to avoid memory
leaks on error) is that at least on error cases, the invariant that
lineptr points to at least n bytes is maintained.
* The optional EOVERFLOW error case specified in POSIX, "The number of
bytes to be written into the buffer, including the delimiter
character (if encountered), would exceed {SSIZE_MAX}.", doesn't seem
practically testable, as any case reading so many characters (half
the address space) would also be liable to run into allocation
failure along (ENOMEM) the way.
* If a read error occurs part way through reading an input line, it
seems unclear whether a partial line should be returned by getline
(avoid input getting lost), which is what glibc does at least in the
fopencookie case used in this test, or whether getline should return
-1 (error) (so avoiding the program misbehaving by processing a
truncated line as if it were complete). (There was a short,
inconclusive discussion about this on the Austin Group list on 9-10
November 2014.)
* The POSIX specification of getline inherits errors from fgetc. I
didn't try to cover fgetc errors systematically, just one example of
such an error.
Samuel Thibault [Tue, 20 Aug 2024 14:22:07 +0000 (16:22 +0200)]
Rules: Also build memcheck tests even when not running them
This will avoid in the future cases like a57cbbd85379 ("malloc: Link
threading tests with $(shared-thread-library") missing the memcheck
cases added in 251843e16fce ("malloc: Link threading tests with
$(shared-thread-library)")
x86: Unifies 'strnlen-evex' and 'strnlen-evex512' implementations.
This commit uses a common implementation 'strnlen-evex-base.S' for both
'strnlen-evex' and 'strnlen-evex512'
This patch serves both to reduce the number of implementations, and it also does some small optimizations that benefit strnlen-evex and strnlen-evex512.
All tests pass on x86.
Benchmarks were taken on SKX.
https://www.intel.com/content/www/us/en/products/sku/123613/intel-core-i97900x-xseries-processor-13-75m-cache-up-to-4-30-ghz/specifications.html
Geometric mean for strnlen-evex over all benchmarks (N=10) was (new/old) 0.881
Geometric mean for strnlen-evex512 over all benchmarks (N=10) was (new/old) 0.953
Florian Weimer [Mon, 19 Aug 2024 13:48:03 +0000 (15:48 +0200)]
string: strerror, strsignal cannot use buffer after dlmopen (bug 32026)
Secondary namespaces have a different malloc. Allocating the
buffer in one namespace and freeing it another results in
heap corruption. Fix this by using a static string (potentially
translated) in secondary namespaces. It would also be possible
to use the malloc from the initial namespace to manage the
buffer, but these functions would still not be safe to use in
auditors etc. because a call to strerror could still free a
buffer while it is used by the application. Another approach
could use proper initial-exec TLS, duplicated in secondary
namespaces, but that would need a callback interface for freeing
libc resources in namespaces on thread exit, which does not exist
today.
Florian Weimer [Fri, 16 Aug 2024 14:05:20 +0000 (16:05 +0200)]
support: Use macros for *stat wrappers
Macros will automatically use the correct types, without
having to fiddle with internal glibc macros. It's also
impossible to get the types wrong due to aliasing because
support_check_stat_fd and support_check_stat_path do not
depend on the struct stat* types.
Florian Weimer [Fri, 16 Aug 2024 14:05:20 +0000 (16:05 +0200)]
io: Use struct statx and xstatx in tests
This avoids the need to define struct_statx to an appropriate
struct stat type variant because struct statx does not change
based on time/file offset flags.
nptl: Fix extraneous testing run by tst-rseq-nptl in the test driver
Fix an issue with commit 8f4632deb354 ("Linux: rseq registration tests")
and prevent testing from being run in the process of the test driver
itself rather than just the test child where one has been forked. The
problem here is the unguarded use of a destructor to call a part of the
testing. The destructor function, 'do_rseq_destructor_test' is called
implicitly at program completion, however because it is associated with
the executable itself rather than an individual process, it is called
both in the test child *and* in the test driver itself.
Prevent this from happening by providing a guard variable that only
enables test invocation from 'do_rseq_destructor_test' in the process
that has first run 'do_test'. Consequently extra testing is invoked
from 'do_rseq_destructor_test' only once and in the correct process,
regardless of the use or the lack of of the '--direct' option. Where
called in the controlling test driver process that has neved called
'do_test' the destructor function silently returns right away without
taking any further actions, letting the test driver fail gracefully
where applicable.
This arrangement prevents 'tst-rseq-nptl' from ever causing testing to
hang forever and never complete, such as currently happening with the
'mips-linux-gnu' (o32 ABI) target.
Carlos O'Donell [Thu, 15 Aug 2024 12:12:35 +0000 (08:12 -0400)]
Report error if setaffinity wrapper fails (Bug 32040)
Previously if the setaffinity wrapper failed the rest of the subtest
would not execute and the current subtest would be reported as passing.
Now if the setaffinity wrapper fails the subtest is correctly reported
as faling. Tested manually by changing the conditions of the affinity
call including setting size to zero, or checking the wrong condition.
ungetc: Fix backup buffer leak on program exit [BZ #27821]
If a file descriptor is left unclosed and is cleaned up by _IO_cleanup
on exit, its backup buffer remains unfreed, registering as a leak in
valgrind. This is not strictly an issue since (1) the program should
ideally be closing the stream once it's not in use and (2) the program
is about to exit anyway, so keeping the backup buffer around a wee bit
longer isn't a real problem. Free it anyway to keep valgrind happy
when the streams in question are the standard ones, i.e. stdout, stdin
or stderr.
Also, the _IO_have_backup macro checks for _IO_save_base,
which is a roundabout way to check for a backup buffer instead of
directly looking for _IO_backup_base. The roundabout check breaks when
the main get area has not been used and user pushes a char into the
backup buffer with ungetc. Fix this to use the _IO_backup_base
directly.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ungetc: Fix uninitialized read when putting into unused streams [BZ #27821]
When ungetc is called on an unused stream, the backup buffer is
allocated without the main get area being present. This results in
every subsequent ungetc (as the stream remains in the backup area)
checking uninitialized memory in the backup buffer when trying to put a
character back into the stream.
Avoid comparing the input character with buffer contents when in backup
to avoid this uninitialized read. The uninitialized read is harmless in
this context since the location is promptly overwritten with the input
character, thus fulfilling ungetc functionality.
Also adjust wording in the manual to drop the paragraph that says glibc
cannot do multiple ungetc back to back since with this change, ungetc
can actually do this.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Noah Goldstein [Wed, 14 Aug 2024 06:37:31 +0000 (14:37 +0800)]
x86: Add `Avoid_STOSB` tunable to allow NT memset without ERMS
The goal of this flag is to allow targets which don't prefer/have ERMS
to still access the non-temporal memset implementation.
There are 4 cases for tuning memset:
1) `Avoid_STOSB && Avoid_Non_Temporal_Memset`
- Memset with temporal stores
2) `Avoid_STOSB && !Avoid_Non_Temporal_Memset`
- Memset with temporal/non-temporal stores. Non-temporal path
goes through `rep stosb` path. We accomplish this by setting
`x86_rep_stosb_threshold` to
`x86_memset_non_temporal_threshold`.
3) `!Avoid_STOSB && Avoid_Non_Temporal_Memset`
- Memset with temporal stores/`rep stosb`
3) `!Avoid_STOSB && !Avoid_Non_Temporal_Memset`
- Memset with temporal stores/`rep stosb`/non-temporal stores. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Noah Goldstein [Wed, 14 Aug 2024 06:37:30 +0000 (14:37 +0800)]
x86: Use `Avoid_Non_Temporal_Memset` to control non-temporal path
This is just a refactor and there should be no behavioral change from
this commit.
The goal is to make `Avoid_Non_Temporal_Memset` a more universal knob
for controlling whether we use non-temporal memset rather than having
extra logic based on vendor. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Noah Goldstein [Tue, 13 Aug 2024 15:29:14 +0000 (23:29 +0800)]
x86: Fix bug in strchrnul-evex512 [BZ #32078]
Issue was we were expecting not matches with CHAR before the start of
the string in the page cross case.
The check code in the page cross case:
```
and $0xffffffffffffffc0,%rax
vmovdqa64 (%rax),%zmm17
vpcmpneqb %zmm17,%zmm16,%k1
vptestmb %zmm17,%zmm17,%k0{%k1}
kmovq %k0,%rax
inc %rax
shr %cl,%rax
je L(continue)
```
expects that all characters that neither match null nor CHAR will be
1s in `rax` prior to the `inc`. Then the `inc` will overflow all of
the 1s where no relevant match was found.
This is incorrect in the page-cross case, as the
`vmovdqa64 (%rax),%zmm17` loads from before the start of the input
string.
If there are matches with CHAR before the start of the string, `rax`
won't properly overflow.
The arithmetic shift will clear any matches prior to the start of the
string while maintaining the signbit so the 1s can properly overflow
to zero in the case of no matches. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Joseph Myers [Wed, 14 Aug 2024 17:15:46 +0000 (17:15 +0000)]
Test errno setting on strtod overflow in tst-strtod-round
We have no tests that errno is set to ERANGE on overflow of
strtod-family functions (we do have some tests for underflow, in
tst-strtod-underflow). Add such tests to tst-strtod-round.
LoongArch: Add cfi instructions for _dl_tlsdesc_dynamic
In _dl_tlsdesc_dynamic, there are three 'addi.d sp, sp, -size'
instructions to allocate stack size for Float/LSX/LASX registers.
Every 'addi.d sp, sp, -size' needs a cfi_adjust_cfa_offset because
of sp is used to compute CFA. But only one 'addi.d sp, sp, -size'
will be run according to HWCAP value. And all cfi_adjust_cfa_offset
will be executed in stack unwinding, it result in incorrect CFA.
Change _dl_tlsdesc_dynamic to _dl_tlsdesc_dynamic,
_dl_tlsdesc_dynamic_lsx and _dl_tlsdesc_dynamic_lasx.
Conflicting cfi instructions can be distributed to the three functions.
And cfi instructions can correspond to stack down instructions.
nptl: Fix stray process left by tst-cancel7 blocking testing
Fix an issue with commit b74121ae4bc5 ("Update.") and prevent a stray
process from being left behind by tst-cancel7 (and also tst-cancelx7,
which is the same test built with '-fexceptions' additionally supplied
to the compiler), which then blocks remote testing until the process has
been killed by hand.
This test case creates a thread that runs an extra copy of the test via
system(3) and using the '--direct' option so that the test wrapper does
not interfere with this instance. This extra copy executes its business
and calls sigsuspend(2) and then never terminates by itself. Instead it
relies on being killed by the main test process directly via a thread
cancellation request or, should that fail, by issuing SIGKILL either at
the conclusion of 'do_test' or by the test driver via 'do_cleanup' where
the test timeout has been hit or the test driver interrupted.
However if the main test process has been instead killed by a signal,
such as due to incorrect execution, before it had a chance to kill the
extra copy of the test case, then the test wrapper will terminate
without running 'do_cleanup' and consequently the extra copy of the test
case will remain forever in its suspended state, and in the remote case
in particular it means that the remote test wrapper will wait forever
for the SSH command to complete.
This has been observed with the 'alpha-linux-gnu' target, where the main
test process triggers SIGSEGV and the test wrapper correctly records:
Didn't expect signal from child: got `Segmentation fault'
in nptl/tst-cancel7.out and terminates, but then the calling SSH command
continues waiting for the remaining process started in the same session
on the remote target to complete.
Address this problem by also registering 'do_cleanup' via atexit(3),
observing that 'support_delete_temp_files' is registered by the test
wrapper before the test initializing function 'do_prepare' is called and
that we call all the functions registered in the reverse of the order in
which they were registered, so it is safe to refer to 'pidfilename' in
'do_cleanup' invoked by exit(3) because by that time temporary files
have not yet been deleted.
A minor inconvenience is that if 'signal_handler' is invoked in the test
wrapper as a result of SIGALRM rather than SIGINT, then 'do_cleanup'
will be called twice, once as a cleanup handler and again by exit(3).
In reality it is harmless though, because issuing SIGKILL is guarded by
a record lock, so if the first call has succeeded in killing the extra
copy of the test case, then the subsequent call will do nothing.
Move the release of the semaphore used to synchronize between an extra
copy of the test run as a separate process and the main test process
until after the PID file has been locked. It is so that if the cleanup
function gets called by the test driver due to premature termination of
the main test process, then the function does not get at the PID file
before it has been locked and conclude that the extra copy of the test
has already terminated. This won't usually happen due to a relatively
high amount of time required to elapse before timeout triggers in the
test driver, but it will change with the next change.
There is still a small time window remaining with this change in place
where the main test process gets killed for some reason between the
extra copy of the test has been already started by pthread_create(3) and
a successful return from the call to sem_wait(3), in which case the
cleanup function can be reached before PID has been written to the PID
file and the file locked. It seems that with the test case structured
as it is now and PID-based process management we have no means to avoid
it.
Wilco Dijkstra [Wed, 7 Aug 2024 13:49:33 +0000 (14:49 +0100)]
benchtests: Add random memset benchmark
Add a new randomized memset test similar to bench-random-memcpy. Instead of
repeating the same call to memset over and over again, it times a large number
of different inputs. The distribution of memset length and alignment is based
on SPEC2017 (length up to 4096 and alignment up to 64).
Wilco Dijkstra [Wed, 7 Aug 2024 13:43:47 +0000 (14:43 +0100)]
AArch64: Improve generic strlen
Improve performance by handling another 16 bytes before entering the loop.
Use ADDHN in the loop to avoid SHRN+FMOV when it terminates. Change final
size computation to avoid increasing latency. On Neoverse V1 performance
of the random strlen benchmark improves by 4.6%.
Paul Zimmermann [Thu, 25 Jul 2024 14:38:08 +0000 (16:38 +0200)]
added inputs giving large errors on x86_64 for new C23 functions
These functions are exp10m1, exp2m1, log10p1, log2p1.
Also regenerated ulps on x86_64.
For each format, there are 4 values, one for each rounding mode.
(For the intel96 format, there are 8 values, 4 for Intel hardware,
and 4 for AMD hardware. However, regen-ulps was only run on Intel.
It should be run in a separate patch on a AMD x86_64.) Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This commit further clarifies these entries and brings getc and getwc in
line with the descriptions of putc and putwc, removing any performance
claims from them as well. Reviewed-by: Florian Weimer <fweimer@redhat.com>
As for exit, also allows concurrent quick_exit to avoid race
conditions when it is called concurrently. Since it uses the same
internal function as exit, the __exit_lock lock is moved to
__run_exit_handlers. It also solved a potential concurrent when
calling exit and quick_exit concurrently.
The test case 'expected' is expanded to a value larger than the
minimum required by C/POSIX (32 entries) so at_quick_exit() will
require libc to allocate a new block. This makes the test mre likely to
trigger concurrent issues (through free() at __run_exit_handlers)
if quick_exit() interacts with the at_quick_exit list concurrently.
This is also the latest interpretation of the Austin Ticket [1].
Checked on x86_64-linux-gnu.
[1] https://austingroupbugs.net/view.php?id=1845 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Thu, 1 Aug 2024 21:31:30 +0000 (23:31 +0200)]
elf: Avoid re-initializing already allocated TLS in dlopen (bug 31717)
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Andreas Schwab [Mon, 10 Jun 2024 10:19:17 +0000 (12:19 +0200)]
iconv: Fix matching of multi-character transliterations (bug 31859)
Only return __GCONV_INCOMPLETE_INPUT for a partial match when the end of
the input buffer is reached. Otherwise it is a non-match, and other
patterns should be tried.
Samuel Thibault [Wed, 17 Jul 2024 00:03:13 +0000 (02:03 +0200)]
hurd: Fix missing pthread_ compat symbol in libc
5476f8cd2e68 ("htl: move pthread_self info libc.") and 9dfa2562162b ("htl: move pthread_equal into libc") to 1dc0bc8f0748 ("htl: move pthread_attr_setdetachstate into libc")
moved some pthread_ symbols from libpthread.so to libc.so, but missed
adding the compat version like 5476f8cd2e68 ("htl: move pthread_self
info libc.") did: libc already had these symbols as forwards,
but versioned GLIBC_2.21, while the symbols in libpthread.so were
versioned GLIBC_2.12.
To fix running executables built before this, we thus have to add the
GLIBC_2.12 version, otherwise execution fails with e.g.
/usr/lib/i386-gnu/libglib-2.0.so: symbol lookup error: /usr/lib/i386-gnu/libglib-2.0.so: undefined symbol: pthread_attr_setinheritsched, version GLIBC_2.12
H.J. Lu [Wed, 24 Jul 2024 21:05:13 +0000 (14:05 -0700)]
linux: Update the mremap C implementation [BZ #31968]
Update the mremap C implementation to support the optional argument for
MREMAP_DONTUNMAP added in Linux 5.7 since it may not always be correct
to implement a variadic function as a non-variadic function on all Linux
targets. Return MAP_FAILED and set errno to EINVAL for unknown flag bits.
This fixes BZ #31968.
Note: A test must be added when a new flag bit is introduced.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Thu, 27 Jun 2024 14:26:56 +0000 (16:26 +0200)]
Enhanced test coverage for strncmp, wcsncmp
Add string/test-strncmp-nonarray and
wcsmbs/test-wcsncmp-nonarray.
This is the test that uncovered bug 31934. Test run time
is more than one minute on a fairly current system, so turn
these into xtests that do not run automatically.
Thought about doing `exit` as well since its only called once per
process, but since its easy to imagine a hot path leading into
`exit(0)`, its less clear if its profitable.
Even if C/POSIX standard states that exit is not formally thread-unsafe,
calling it more than once is UB. The glibc already supports
it for the single-thread, and both elf/nodelete2.c and tst-rseq-disable.c
call exit from a DSO destructor (which is called by _dl_fini, registered
at program startup with __cxa_atexit).
However, there are still race issues when it is called more than once
concurrently by multiple threads. A recent Rust PR triggered this
issue [1], which resulted in an Austin Group ask for clarification [2].
Besides it, there is a discussion to make concurrent calling not UB [3],
wtih a defined semantic where any remaining callers block until the first
call to exit has finished (reentrant calls, leaving through longjmp, and
exceptions are still undefined).
For glibc, at least reentrant calls are required to be supported to avoid
changing the current behaviour. This requires locking using a recursive
lock, where any exit called by atexit() handlers resumes at the point of
the current handler (thus avoiding calling the current handle multiple
times).
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
[1] https://github.com/rust-lang/rust/issues/126600
[2] https://austingroupbugs.net/view.php?id=1845
[3] https://www.openwall.com/lists/libc-coord/2024/07/24/4 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* mseal for all architectures.
* map_shadow_stack for x32.
* Replace sync_file_range with sync_file_range2 for csky (which
fixes a broken sync_file_range usage).
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py. Reviewed-by: Florian Weimer <fweimer@redhat.com>
Michael Karcher [Sun, 28 Jul 2024 13:30:57 +0000 (15:30 +0200)]
Mitigation for "clone on sparc might fail with -EFAULT for no valid reason" (bz 31394)
It seems the kernel can not deal with uncommitted stack space in the area intended
for the register window when executing the clone() system call. So create a nested
frame (proxy for the kernel frame) and flush it from the processor to memory to
force committing pages to the stack before invoking the system call.
Bug: https://www.mail-archive.com/debian-glibc@lists.debian.org/msg62592.html
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31394
See-also: https://lore.kernel.org/sparclinux/62f9be9d-a086-4134-9a9f-5df8822708af@mkarcher.dialup.fu-berlin.de/ Signed-off-by: Michael Karcher <sourceware-bugzilla@mkarcher.dialup.fu-berlin.de> Reviewed-by: DJ Delorie <dj@redhat.com>
manual: make setrlimit() description less ambiguous
The existing description for setrlimit() has some ambiguity. It could be
understood to have the semantics of getrlimit(), i.e., the limits from the
process are stored in the provided rlp pointer.
Make the description more explicit that rlp are the input values, and that
the limits of the process is changed with this function.
The manual entry for `putc' described what "most systems" do instead of
describing the glibc implementation and its guarantees. This commit
fixes that by warning that putc may be implemented as a macro that
double-evaluates `stream', and removing the performance claim.
Even though the current `putc' implementation does not double-evaluate
`stream', offering this obscure guarantee as an extension to what
POSIX allows does not seem very useful.
The entry for `putwc' is also edited to bring it in line with `putc'. Reviewed-by: Florian Weimer <fweimer@redhat.com>
This helps compilers split the codegen for setting up the arguments
(`__expression`, `__filename`, etc...) from the potentially hot cold
where the `assert` is to a presumably cold region on the assertion
failure path.
Reviewed-by: Florian Weimer <fweimer@redhat.com> Reviewed-by: Sam James <sam@gentoo.org>
stdio-common: Add test for vfscanf with matches longer than INT_MAX [BZ #27650]
Complement commit b03e4d7bd25b ("stdio: fix vfscanf with matches longer
than INT_MAX (bug 27650)") and add a test case for the issue, inspired
by the reproducer provided with the bug report.
This has been verified to succeed as from the commit referred and fail
beforehand.
As the test requires 2GiB of data to be passed around its performance
has been evaluated using a choice of systems and the execution time
determined to be respectively in the range of 9s for POWER9@2.166GHz,
24s for FU740@1.2GHz, and 40s for 74Kf@950MHz. As this is on the verge
of and beyond the default timeout it has been increased by the factor of
8. Regardless, following recent practice the test has been added to the
standard rather than extended set.
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
posix: Use <support/check.h> facilities in tst-truncate and tst-truncate64
Remove local FAIL macro in favor to FAIL_RET from <support/check.h>,
which provides equivalent reporting, with the name of the file of the
failure site additionally included, for the tst-truncate-common core
shared between the tst-truncate and tst-truncate64 tests.
nptl: Use <support/check.h> facilities in tst-setuid3
Remove local FAIL macro in favor to FAIL_EXIT1 from <support/check.h>,
which provides equivalent reporting, with the name of the file and the
line number within of the failure site additionally included. Remove
FAIL_ERR altogether and include ": %m" explicitly with the format string
supplied to FAIL_EXIT1 as there seems little value to have a separate
macro just for this.
1. Add shadow stack support to x32 signal.
2. Use the 64-bit map_shadow_stack syscall for x32.
3. Set up shadow stack for x32.
Add the map_shadow_stack system call to <fixup-asm-unistd.h> and regenerate
arch-syscall.h. Tested on Intel Tiger Lake with CET enabled x32. There
are no regressions with CET enabled x86-64. There are no changes in CET
enabled x86-64 _dl_start_user.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
git://sourceware.org / glibc.git / log