Corinna Vinschen [Tue, 15 Dec 2015 15:34:40 +0000 (16:34 +0100)]
Drop max_sys_priv wincap
Convert sys_privs to const struct with TOKEN_PRIVILEGES layout.
Drop function get_system_priv_list. Just use pointer to sys_privs.
Dropping max_sys_priv from wincaps requires to make sure that the
bitfield is 8 byte aligned on x86_64, otherwise gcc (5.3 only?)
apparently breaks access to the bitfield (off by 4 bytes).
Corinna Vinschen [Fri, 24 Jun 2016 11:39:42 +0000 (13:39 +0200)]
Fix major device check when locking partitions
The change introduced in commit b2867a6 contains a faulty check for
the major device number in fhandler_dev_floppy::lock_partition.
Fix this. Also fix comments.
Corinna Vinschen [Thu, 23 Jun 2016 14:56:41 +0000 (16:56 +0200)]
Handle up to 63 partitions per drive
Revamp device parsing code. Introducing support for more partitions
into the shilka-generated parser has the unfortunate side-effect of
raising the size of the DLL by almost 2 Megs. Therefore we split out
the handling for /dev/sdXY devices into a tiny bit of hand-written
code.
While at it, remove some unused cruft from devices.* and generally
clean up the device class to provide access methods instead of direct
access to members.
Corinna Vinschen [Tue, 21 Jun 2016 11:39:04 +0000 (13:39 +0200)]
Use correct file info (especially inode number) for newly created files
fhandler_base::open_fs has two problems:
- When newly creating a file, the file info in the path_conv is
incorrect. It points to info for the parent dir, not to info
for the file itself (which, naturally, wasn't available before).
- Fetching the file's inode number only worked for non-NFS.
Both problems should be fixed now by reloading file info if the file
has just been created, as well as using the new FS-agnostic
path_conv::get_ino method.
Corinna Vinschen [Tue, 21 Jun 2016 11:24:41 +0000 (13:24 +0200)]
Improve encapsulation of FS type behind path_conv cover
Rather than having to check for the FS type in the caller and having
to call different functions whether FS is NFS or not, encapsulate the
info in path_conv_handle/path_conv methods to allow FS type agnostic
calling from upper level functions.
Commit a23e6a35d896a075640db714b28ce74bb6b8d7ff introduced a timer
object to the WFMO handling in select_stuff::wait to allow sub-tickcount
timeout values in select.
Problems with this patch: The timer was created and destroyed on every
invocation of select_stuff::wait, thus potentially multiple times per
select. Also, since the timer was prepended to the WFMO hande list,
the timer handle could shadow actual events on other objects, given that
WFMO checks the objects in the order they have been specified in the
HANDLE array. The timer was also created/destroyed and added to the
HANDLE array even if it was not required.
This patch drops the local timer HANDLE and recycles the cw_timer HANDLE
in the cygtls area instead. Thus we typically don't need to create the
timer in select at all, and we never have to destroy it.
The timer HANDLE is now also appended as last object to the HANDLE array,
and it's only added if actually needed.
Fix condition in select which results in busy loop.
The check for current timestamp > start timestamp has an unwelcome
side effect: The loop is not left as long as the current timestamp
hasn't been incremented. This leads to busy loops of about one tick
(10 to 16 ms per MSDN).
This fixes https://cygwin.com/ml/cygwin/2016-05/msg00327.html
Takashi Yano [Mon, 6 Jun 2016 13:09:34 +0000 (15:09 +0200)]
Return at most one line of input in canonical mode
'man termios' says:
"A read(2) returns at most one line of input" in canonical mode.
On cygwin 2.5.1, read(2) returns all data in buffer if the buffer
size specified is large enough. This behaviour is correct in
noncanonical mode, but is not correct in canonical mode.
While checking this problem, I found a bug of tcflush(). tcflush()
flushes only partial data in the buffer. The patch also fixes this bug.
The patch has also been tested against the problem reported in
https://cygwin.com/ml/cygwin/2016-05/msg00318.html.
Only regenerate tlsoffsets{64}.h if cygtls.h can be compiled
The rule to make tlsoffset{64}.h has a flaw. If cygtls.h can't be
built for whatever reason, it *still* regenerates tlsoffsets{64}.h,
just with size 0. If the bug is not in cygtls.h itself, this behaviour
breaks further building, because fixing the problem won't result in
regenerating tlsoffset{64}.h. Manual intervention is required.
Fix that by removing tlsoffsets{64}.h if gentls_offsets fails.
Temporarily revert to use PROCESS_QUERY_INFORMATION instead of
PROCESS_QUERY_LIMITED_INFORMATION to make sure every aspect of the
next release is still XP/2003 compatible.
dlopen: Add dot to filename if no slash is present
We're appending a dot to the filename before calling LoadLibrary to
override ".dll" automagic. This only worked for paths, not for simple
filenames since it required a slash in the pathname. Fix that.
Corinna Vinschen [Tue, 31 May 2016 14:33:21 +0000 (16:33 +0200)]
realpath: Handle Win32 and NT long path prefixes
So far drive letter paths have been handled special since path_conv
leaves the incoming path untouched except for converting backslashes
to forward slashes. However, if the incoming path starts with a
long path prefix, the same problem occurs. Therefore handle all
paths starting with a backslahs the same way.
Anton Kolesov [Fri, 13 May 2016 15:21:08 +0000 (18:21 +0300)]
arc: Have nops in _exit_halt only for ARCompact
ARCompact processors (ARC 600 and ARC 700) require three "nop"s after the
"flag 1" instruction. Later ARC processors do not have this requirement, so
it is possible to reduce size of "_exit_halt" for them.
libgloss/
2016-05-24 Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc/crt0.S (_exit_halt): Insert nops only for ARCompact.
Anton Kolesov [Fri, 13 May 2016 15:09:43 +0000 (18:09 +0300)]
arc: Rework default exception handlers for ARC EM and HS
Initially crt0.S used a special function, declared as weak as a default
exception handler in interrupt vector table. To let user override individual
handlers, this function had multiple names - one for each IVT entry, which,
however, was terribly confusing for the debugger and user - because it
wasn't clear which symbol will be used as a function name in debugger.
Defining multiple separate functions - one for each handler, would resolve
the mess, but would increase code size of crt0.o.
To clean this up, this patch defines exception handlers as weak symbols as
well, but those are defined as just symbols, not functions, hence there
would be less confusion over what is what. At the same time, users still can
redefine exception handlers symbol by creating functions with respective
names.
libgloss/
2016-05-24 Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc/crt0.S: Convert memory_error and friends to non-function
symbols.
Corinna Vinschen [Wed, 25 May 2016 10:13:03 +0000 (12:13 +0200)]
TZ: Replace unreliable isupper calls on wchars
In case the TZ variable is empty, Cygwin fetches timezone info from
Windows. Extracting the timezone short name uses isupper on wide chars.
Replace with explicit check for A <= character <= Z to be independent
of undefined behaviour.
Yaakov Selkowitz [Fri, 20 May 2016 21:55:50 +0000 (16:55 -0500)]
Feature test macros: ctermid, cuserid
The proper location for these functions has always been <stdio.h>, however
XPG4 and SUSv2 did mandate a duplicate declaration in <unistd.h>. cuserid
was dropped in SUSv3 (it was marked legacy since XPG4) and the ctermid
declaration in <unistd.h> was made optional and obsolete in SUSv4.
Corinna Vinschen [Fri, 20 May 2016 19:48:10 +0000 (21:48 +0200)]
mmap: Fix size restriction of maps due to using 32 bit size type
Throughout mmap, size-related variables and parameters are still using
DWORD as type, which disallows mapping ranges > 4Gigs. Fix this by
using SIZE_T throughout for those vars and parameters.
Also, drop unused off parameter from 1st variant of mmap_record::map_pages.
Corinna Vinschen [Fri, 20 May 2016 15:45:24 +0000 (17:45 +0200)]
Fix thread priority handling
So far pthread::postcreate() only sets the thread priority at all, only
if the inherit-scheduler attribute is PTHREAD_EXPLICIT_SCHED. This
completely ignores the PTHREAD_INHERIT_SCHED case, since in contrast
to POSIX, a thread does not inherit its priority from the creating
thread, but always starts with THREAD_PRIORITY_NORMAL.
pthread_getschedparam() only returns what's stored in the thread attributes,
not the actual thread priority.
Corinna Vinschen [Fri, 20 May 2016 15:38:22 +0000 (17:38 +0200)]
Rewrite scheduler functions getting and setting process and thread priority
So far the scheduler priority handling is not POSIX compatible.
The priorities use a range of -14 up to +15, which means it's not clear
if the POSIX-required return value of -1 in case of an error is *really*
an error or just the valid priority value -1. Even more confusing, -14
is the *max* value and 15 is the *min* value. Last but not least this
range doesn't match the POSIX requirement of at least 32 priority values.
This patch cleans up scheduler priority handling and moves the valid
priority range to 1 (min) - 32 (max). It also adds a function
sched_get_thread_priority() which will help to make thread priority
more POSIX-like.
John Hood [Wed, 18 May 2016 23:14:17 +0000 (19:14 -0400)]
Improve and simplify select().
* select.h: Eliminate redundant select_stuff::select_loop state.
* select.cc (select): Eliminate redundant
select_stuff::select_loop state. Eliminate redundant code for
zero timeout. Do not return early on early timer return.
(select_stuff::wait): Eliminate redundant
select_stuff::select_loop state.
John Hood [Wed, 18 May 2016 23:14:16 +0000 (19:14 -0400)]
Use high-resolution timebases for select().
* select.h: Change prototype for select_stuff::wait() for larger
microsecond timeouts.
* select.cc (pselect): Convert from old cygwin_select().
Implement microsecond timeouts.
(cygwin_select): Rewrite as a wrapper on pselect().
(select): Implement microsecond timeouts.
(select_stuff::wait): Implement microsecond timeouts with a timer
object.
Anton Kolesov [Tue, 17 May 2016 11:08:32 +0000 (14:08 +0300)]
Sync toplevel configure with upstream GCC.
This fixes a problem, where libgloss wouldn't be built for ARC processors,
even though it is actually supported. The original patch that introduced
support for ARC in libgloss hasn't been submitted to GCC maillist, hence
when top-level configure has been synced with GCC - this libgloss patch has
been effectively reverted.
Libgloss support for ARC has been accepted in GCC:
https://gcc.gnu.org/ml/gcc-patches/2016-05/msg01148.html
ChangeLog
2016-05-17 Anton Kolesov <Anton.Kolesov@synopsys.com>
* configure.ac: Sync with upstream GCC.
* configure: Regenerate.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Wilco Dijkstra [Thu, 12 May 2016 16:16:58 +0000 (16:16 +0000)]
Add rawmemchr
Marcus Shawcroft wrote:
> This patch appears to have been munged by the mail system, can you
> repost as an attachment please.
Sure, I've attached the patch.
Wilco
Add a simple rawmemchr implementation. Use strlen for rawmemchr(s, '\0') as it is the
fastest way to search for '\0', and use memchr with an infinite size for other cases.
This is 3x faster for large sizes.
The reason is that the load order from sys/select.h includes sys/_types.h
before sys/config.h has been included from anywhere else. sys/_types.h
defines _fpos64_t only if __LARGE64_FILES is defined, but it never is in
this scenario. So sys/_types.h has to make sure to get the configuration
info by itself.
Jeff Johnston [Wed, 11 May 2016 21:18:48 +0000 (17:18 -0400)]
Fix strlen using Thumb-2 with -Os -marm
2016-04-18 Thomas Preud'homme <thomas.preudhomme@arm.com>
* libc/machine/arm/strlen-stub.c: Check capabilities of architecture
to decide which Thumb implementation to use and fall back to C
implementation for architecture not supporting Thumb mode.
* libc/machine/arm/strlen.S: Likewise.
Jeff Johnston [Tue, 3 May 2016 18:21:17 +0000 (14:21 -0400)]
Add _Thread_queue_Queue::_owner for RTEMS
Add _Thread_queue_Queue::_owner which will be used for the upcomming
priority inheritance implementation and an O(m) independence-preserving
protocol (OMIP) implementation.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
git://sourceware.org / newlib-cygwin.git / log