When i386 and x86-64 mathinline.h was merged into a single mathinline.h,
"gcc -m32" enables x87 inline functions on x86-64 even when -mfpmath=sse
and SSE2 is enabled. It is a regression on x86-64. We should check
__SSE2_MATH__ instead of __x86_64__ when disabling x87 inline functions.
gcc-3.2 is unable to correctly compile x86_64 routines for llrint
since it gets redefined. This is because gcc 3.2 does not set
__SSE2_MATH__ for x86_64, thus exposing the duplicate definition.
The correct fix ought to be to check for both __SSE2_MATH__ and
__x86_64__ and enable those bits only when neither are defined.
H.J. Lu [Wed, 13 Aug 2014 00:02:51 +0000 (17:02 -0700)]
Replace cpuid asm statement with __cpuid_count
The compiler doesn't know that the cpuid asm statement in intel_check_word
will trash RBX. We are lucky that it doesn't cause any problems since
RBX is also used by compiler for other purposes so that RBX is saved and
restored. This patch replaces it with __cpuid_count.
Mike Frysinger [Thu, 7 Aug 2014 03:44:29 +0000 (23:44 -0400)]
detect broken linker handling of __ehdr_start
Older versions of ld on ia64 support __ehdr_start, but generate relocs
when they shouldn't. This causes the ld.so to not run because it tries
to resolve the __ehdr_start symbol (but it's not exported).
Joseph Myers [Tue, 12 Aug 2014 20:31:54 +0000 (20:31 +0000)]
Fix powerpc-nofpu __fe_enabled_env and __fe_nonieee_env (bug 17261).
On powerpc, floating-point environment macros are defined as pointers
to constants in the library that contain the bit-patterns of the
desired environment, instead of being magic constants cast to pointer
type.
For soft-float, the bit-patterns used for fenv_t are not laid out the
same as for hard-float. (e500 has a third layout used; that's not an
ABI issue because these values are only meaningful within a single
process, all of whose glibc libraries must come from the same build of
glibc.) While the __fe_dfl_env value for soft-float was appropriate
for the soft-float fenv_t representation, the other two constants had
the same bit-patterns as for hard-float. Those bit patterns had the
effect of having exceptions already raised, causing
math/test-fenv-return to fail; this patch fixes the patterns used.
(__fe_nonieee_env also had exceptions unmasked, though they should be
masked to match hard-float semantics. Since there is no separate
non-IEEE mode for soft-float, it's most appropriate for
__fe_nonieee_env to be the same as __fe_dfl_env; this patch makes it
an alias.)
Tested for powerpc-nofpu.
[BZ #17261]
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_enabled_env): Change
value to 0.
(__fe_nonieee_env): Define as an alias for __fe_dfl_env.
Mike Frysinger [Mon, 4 Aug 2014 14:31:27 +0000 (10:31 -0400)]
tst-gettext2: make setup more robust
This test should be more robust about setting up its lang dirs.
I had two completely different systems (ia64 & x86_64) get wedged
in a way where the test just kept FAILing on me due to some of the
files missing. This probably wasn't a big deal until the recent
commit which made checking of the locale dirs more robust (for
security reasons).
Wilco Dijkstra [Thu, 7 Aug 2014 16:29:55 +0000 (16:29 +0000)]
This patch adds new function libc_feholdsetround_noex_aarch64_ctx, enabling
further optimization. libc_feholdsetround_aarch64_ctx now only needs to
read the FPCR in the typical case, avoiding a redundant FPSR read.
Performance results show a good improvement (5-10% on sin()) on cores with
expensive FPCR/FPSR instructions.
This patch fixes the incorrect guard by __USE_MISC of struct winsize and
struct termio in powerpc termios header. Current states leads to build
failures if the program defines _XOPEN_SOURCE, but not _DEFAULT_SOURCE
or either _BSD_SOURCE or _SVID_SOURCE. Without any definition,
__USE_MISC will not be defined and neither the struct definitions.
This patch copies the default Linux ioctl-types.h by adjusting only the
character control field (c_cc) size in struct termio.
Use the SSI_IEEE_RAISE_EXCEPTION function as from feraiseexcept,
instead of __ieee_get+set_fp_status. Always raise the FP exceptions
from float-to-integer conversion.
Mike Frysinger [Sun, 3 Aug 2014 16:14:35 +0000 (16:14 +0000)]
ia64: define nocancel entry points in PSEUDO
The previous set of not-cancel.h headers (prior to the commit 2fbdf5339aaeaa423bd661524f7ec7af41fa2606) did not require the
arch to define nocancel entry points, so ia64 never did.
However, after the various files were merged, it became a hard
requirement for arches which mean ia64 failed to build.
Here we add dedicated entry points. It'd be nice to merge
with the existing stubs like other arches do, but the ia64
asm does not lend itself to interleaving of functions. If
someone has a suggestion on merging these, that'd be great,
but at least now we build & pass tests again.
The DEBUG macro is checked for its value in one place and if it is
defined in another. Make this consistent across the two cases and use
the same style that we did in mktime.c, which is to check if the macro
is defined and it is set.
Fixes -Wundef warnings for MBSTATE_T and HAVE_STRING_H. The
HAVE_STRING_H bit is a merge from the gnulib fnmatch.c and the
MBSTATE_T fix has been posted to gnulib for inclusion.
This patch fixes the remaining ONE_DIRECTION warnings for s390 specific conversions.
It defines ONE_DIRECTION to 0 like the patch from Steve Ellcey:
https://www.sourceware.org/ml/libc-alpha/2014-05/msg00039.html
Ling Ma [Mon, 14 Jul 2014 04:02:52 +0000 (00:02 -0400)]
Improve 64bit memcpy performance for Haswell CPU with AVX instruction
In this patch we take advantage of HSW memory bandwidth, manage to
reduce miss branch prediction by avoiding using branch instructions and
force destination to be aligned with avx instruction.
The CPU2006 403.gcc benchmark indicates this patch improves performance
from 2% to 10%.
Jeff Layton [Wed, 23 Jul 2014 18:21:05 +0000 (14:21 -0400)]
fcntl-linux.h: add new definitions and manual updates for open file description locks
Open file description locks have been merged into the Linux kernel for
v3.15. Add the appropriate command-value definitions and an update to
the manual that describes their usage.
This is a change to the dynamic linker to add prelinker support for the
R_ARM_TLS_DESC relocation. Two cases can be considered here, the usual
one where lazy binding is in use and the less frequent one, where
immediate binding is requested via the use of the DF_BIND_NOW dynamic
flag (e.g. by using the GNU linker's "-z now" option).
This change only handles the first case. In this scenario the prelinker
does what the dynamic linker would do, that is it preinitialises
R_ARM_TLS_DESC relocations with a pointer to the lazy specialization as
provided with the DT_TLSDESC_PLT dynamic tag. A conflict is
additionally created and in the conflict resolution path the dynamic
linker complements the work by initialising the object's pointer as
indicated by the DT_TLSDESC_GOT dynamic tag to the linker's internal
lazy specialization worker function and also providing the associated
link map in the second entry of the GOT. This step is required, because
if prelinking is successful at the run time, then the dynamic linker's
elf_machine_runtime_setup() function isn't called that would normally do
so.
The second case remains unresolved, because support for that scenario
has not been implemented in the prelinker. In this case the lazy
specialization is unavailable and the DT_TLSDESC_PLT dynamic tag is not
present.
The prelinker could assume the common case of static specialization and
resolve the relocation, but that would require the exposure of dynamic
linker's specialization worker function. Furthermore the dynamic linker
would have to handle the relocation in the conflict resolution path and
see if the dynamic specialization should be used instead. This however
would require access to data structures currently not made available to
the conflict resolution path and therefore a redesign of this part of
the dynamic linker.
Alternatively the prelinker could defer all processing to the dynamic
linker's conflict resolution path, but that would require similar access
to the said data structures.
Therefore the prelinker issues an error instead and the dynamic linker
has assertions to check that DT_TLSDESC_PLT and DT_TLSDESC_GOT are in
use in its conflict resolution path.
This change resolves all TLS failures in the prelinker testsuite, as
noted in the bug report, as well as the small test case provided there.
Unfortunately we don't seem to have any hooks to factor in the prelinker
(if present on a system) to testing, so at this time this fix has to
rely on using the prelinker test suite and enabling TLS descriptors
there for coverage.
Joseph Myers [Thu, 17 Jul 2014 17:56:43 +0000 (17:56 +0000)]
Fix fallback fesetenv and feupdateenv on FE_NOMASK_ENV (bug 17088).
This patch fixes bug 17088, fallback fesetenv and feupdateenv not
giving an error for an FE_NOMASK_ENV argument when it requires traps
to be enabled. (This is the bug tested for by test-fenv-return.c.)
Joseph Myers [Thu, 17 Jul 2014 17:55:44 +0000 (17:55 +0000)]
[PATCH 6/6] Split s390 out of main Linux kernel-features.h.
This patch splits s390 out of the main Linux kernel-features.h.
Not tested.
* sysdeps/unix/sysv/linux/s390/kernel-features.h: New file.
* sysdeps/unix/sysv/linux/kernel-features.h [__s390__]
(__ASSUME_SOCKETCALL): Do not define.
Joseph Myers [Thu, 17 Jul 2014 14:35:48 +0000 (14:35 +0000)]
Refactor handling of /lib64 etc. cases, move out of sysdeps/gnu/configure.ac.
This patch continues removing architecture-specific cases from
non-architecture-specific files by moving the logic to use directories
such as /lib64 out of sysdeps/gnu/configure.ac.
A new macro LIBC_SLIBDIR_RTLDDIR is created that sysdeps configure
scripts can use to declare the library directories to be used; the
logic was previously duplicated in configure fragments for aarch64,
mips and x32 as well as in sysdeps/gnu/configure.ac. This macro is
used directly in sysdeps/gnu/configure.ac only to provide the /lib
default (the logic saying that with --prefix=/usr shared libraries go
in /lib not /usr/lib); the architecture cases formerly there are moved
into various new or existing configure.ac files. The new macro is
also used in the various architecture fragments that already had such
logic. In the x32 there was previously a configure fragment, but it
was a directly written one without a .ac file; now a .ac file is used
there instead to generate configure.
Tested x86_64 that the installed shared libraries, and the directory
structure of the installation, are unchanged by this patch.
There is an old bug report - bug 6441 - about library directories
changing after reconfiguring. If this is still applicable - and I
haven't attempted to confirm it or review the old patch pointed to in
that bug - then this patch should reduce the number of places needing
changing in any fix.
* aclocal.m4 (LIBC_SLIBDIR_RTLDDIR): New macro.
* sysdeps/gnu/configure.ac: Use LIBC_SLIBDIR_RTLDDIR. Remove
cases for individual architectures.
* sysdeps/gnu/configure: Regenerated.
* sysdeps/unix/sysv/linux/aarch64/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR.
* sysdeps/unix/sysv/linux/aarch64/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure:
Regenerated.
* sysdeps/unix/sysv/linux/s390/s390-64/configure.ac: New file.
* sysdeps/unix/sysv/linux/s390/s390-64/configure: New generated
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/configure.ac: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/configure: New generated
file.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac: New file.
* sysdeps/unix/sysv/linux/x86_64/64/configure: New generated file.
* sysdeps/unix/sysv/linux/x86_64/x32/configure.ac: New file.
* sysdeps/unix/sysv/linux/x86_64/x32/configure: Generate.
Joseph Myers [Thu, 17 Jul 2014 14:31:12 +0000 (14:31 +0000)]
Move architecture shlib-versions files to Linux-specific directories.
Various architectures have files such as sysdeps/<arch>/shlib-versions
whose contents are in fact entirely Linux-specific, relating only to
the symbol / shared library versions for the port to Linux on that
architecture, when any future port to a different OS on that
architecture would use the symbol version of the glibc release it goes
in, as standard for new ports.
This patch moves such files under sysdeps/unix/sysv/linux/, merging in
the contents of sysdeps/<arch>/nptl/shlib-versions in the process.
The only bits not moved are those relating to libgcc_s versions, which
don't appear OS-specific in the same way that glibc's symbol versions
so. It deliberately does not change the regular expressions given for
matching configurations in each file; some match only Linux although
not Linux-specific, or match other OSes although Linux-specific. It
is with a view to at least the following further cleanups:
* Move architecture-specific content from the toplevel shlib-versions
and nptl/shlib-versions into sysdeps shlib-versions files, so
eliminating another difference between ex-ports and non-ex-ports
architectures.
* Likewise, for OS-specific content in shlib-versions files.
* At that point, the first field in shlib-versions files (the regular
expression matching a configuration triplet) should be redundant, so
eliminate that field and leave shlib-versions selection working
purely on a sysdeps basis (with limited use of %ifdef in
shlib-versions files when needed) rather than having its own
separate mechanism to select what configuration information is
relevant.
* Move the build of gnu/lib-names.h to a similar mechanism to that
used for gnu/stubs.h (each library build installing a version of the
header specifically for that build), so we can eliminate the
duplication of soname information in the makefiles and get it purely
from shlib-versions files again.
There may be other cleanups possible as well (in particular, I'm not
sure that all cases where the same "Earliest symbol set" information
is repeated for many different libraries actually should need to
repeat it rather than specifying it just once for DEFAULT for the
given configuration, and separately specifying any non-default choices
of soname).
Tested x86_64 that the installed shared libraries are unchanged by
this patch.
* sysdeps/aarch64/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: ... here.
* sysdeps/alpha/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/alpha/shlib-versions: ... here.
* sysdeps/arm/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/arm/shlib-versions: ... here.
* sysdeps/hppa/shlib-versions: Move all contents except for
libgcc_s entry to ...
* sysdeps/unix/sysv/linux/hppa/shlib-versions: ... here. Merge in
entry from ...
* sysdeps/hppa/nptl/shlib-versions: ... here. Remove file.
* sysdeps/ia64/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/ia64/shlib-versions: ... here. Merge in
entry from ...
* sysdeps/ia64/nptl/shlib-versions: ... here. Remove file.
* sysdeps/m68k/coldfire/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: ... here.
* sysdeps/microblaze/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: ... here.
* sysdeps/mips/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/mips/shlib-versions: ... here. Merge in
entry from ...
* sysdeps/mips/nptl/shlib-versions: ... here. Remove file.
* sysdeps/tile/shlib-versions: Move to ...
* sysdeps/unix/sysv/linux/tile/shlib-versions: ... here.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Merge in entry
from ...
* sysdeps/x86_64/64/shlib-versions: ... here. Remove file.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Merge in
entry from ...
* sysdeps/x86_64/x32/shlib-versions: ... here. Remove file.
Will Newton [Fri, 4 Jul 2014 15:10:15 +0000 (16:10 +0100)]
ARM: Fix compiler warnings from atomic.h
__arch_compare_and_exchange_bool_*_int return a boolean so in the
dummy implementations for 8, 16 and 64 bits return zero rather than
oldval. Zero is used rather than TRUE or FALSE to avoid needing to
including any headers for these dummy functions.
ChangeLog:
2014-07-17 Will Newton <will.newton@linaro.org>
* sysdeps/arm/bits/atomic.h
(__arch_compare_and_exchange_bool_8_int): Evaluate to zero.
(__arch_compare_and_exchange_bool_16_int): Likewise.
(__arch_compare_and_exchange_bool_64_int): Likewise.
Will Newton [Thu, 10 Jul 2014 08:18:03 +0000 (09:18 +0100)]
iconv/loop.c: Fix -Wundef warning with !_STRING_ARCH_unaligned
If code is required to handle the unaligned case then loop.c includes
itself and relies on the #undefs at the end of the file to avoid
outputting two copies of LOOPFCT and gconv_btowc. However
MAX_NEEDED_INPUT is tested with #if so this causes a warning.
Reorder the code so that the function definitions are in an #else
block to make the behaviour clearer and fix the warning.
Verified that code is unchanged on x86_64 and arm.
ChangeLog:
2014-07-17 Will Newton <will.newton@linaro.org>
* iconv/loop.c: Move definition of LOOPFCT and gconv_btowc
into an #else block.
H.J. Lu [Mon, 14 Jul 2014 14:58:27 +0000 (07:58 -0700)]
Enable AVX2 optimized memset only if -mavx2 works
* config.h.in (HAVE_AVX2_SUPPORT): New #undef.
* sysdeps/i386/configure.ac: Set HAVE_AVX2_SUPPORT and
config-cflags-avx2.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add
memset-avx2 only if config-cflags-avx2 is yes.
* sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list):
Tests for memset_chk and memset only if HAVE_AVX2_SUPPORT is
defined.
* sysdeps/x86_64/multiarch/memset.S: Define multiple versions
only if HAVE_AVX2_SUPPORT is defined.
* sysdeps/x86_64/multiarch/memset_chk.S: Likewise.
Jim Meyering [Sun, 13 Jul 2014 00:07:21 +0000 (17:07 -0700)]
regex: don't deref NULL upon heap allocation failure
* posix/regcomp.c: (parse_dup_op): Handle duplicate_tree
failure in one more place.
To trigger the segfault, configure grep -with-included-regex,
build it, and run these commands:
( ulimit -v 300000; echo a|src/grep -E a+++++++++++++++++++++ )
We address by checking that all calls to set*id on all threads give
the same result, and only abort if we see success followed by failure
(or vice versa).
Commit 887865f remove the lll_robust_trylock definition on all
architectures, however for powerpc both __lll_trylock and
__lll_cond_trylock were based on lll_robust_trylock definition.
This patch restore it with a different name.
- Use of !_LIBC instead of HAVE_CONFIG_H
- Code changes in [!_LIBC] that don't affect us
- Minor formatting changes
- Use __builtin_expect in shared code
- Define some macros in [_LIBC] that are used in gnulib but never
defined in glibc
- Flip macro check for STRERROR_R_CHAR_P so that it does not throw a
warning
Fix crash when system has no ipv6 address [BZ #17125]
Here's an updated patch to fix the crash in bug-ga2 when the system
has no configured ipv6 address. I have taken a different approach of
using libc_freeres_fn instead of the libc_freeres_ptr since the former
gives better control over what is freed; we need that since cache may
or may not be allocated using malloc.
Verified that bug-ga2 works correctly in both cases and does not have
memory leaks in either of them.
Will Newton [Mon, 7 Jul 2014 14:14:26 +0000 (15:14 +0100)]
Fix -Wundef warnings for SHARED
The definition of SHARED is tested with #ifdef pretty much everywhere
apart from these few places. The tlsdesc.c code seems to be copy and
pasted to a few architectures and there is one instance in the hppa
startup code.
While we're at fixing build warnings, here's one unnecessary warning
that can be fixed fairly easily. The SIZE variable is never actually
use uninitialized, but the compiler cannot make that out and thinks
(correctly) that there is a potential for accessing SIZE without
initializing it. Make this safe by initializing SIZE to 0.
There was a typo in the previous patch due to which resplen2 was
checked for non-zero instead of the value at resplen2. Fix that and
improve the condition by checking resplen2 for non-NULL (instead of
answerp2) and also adding the check in a third place.
Now that MEMCPY_OK_FOR_FWD_MEMMOVE should be define on memcopy.h there
is no need to specialized powerpc memmove implementation. This patch
moves the define set to powerpc memcopy and cleanup its definition on
powerpc code.
PowerPC: Align power7 memcpy using VSX to quadword
This patch changes power7 memcpy to use VSX instructions only when
memory is aligned to quardword. It is to avoid unaligned kernel traps
on non-cacheable memory (for instance, memory-mapped I/O).
git://sourceware.org / glibc.git / log