Peter Rajnoha [Thu, 14 Jul 2016 12:33:33 +0000 (14:33 +0200)]
lvmdump: include major and minor numbers for pvs and lvs reports
Including major and minor numbers in pvs and lvs output when calling
lvmdump -a makes it a bit easier to match these items with possible
system log/journal.
Commit ca878a3426197b629c76e98cfc049948da470cd7 changed behavior
or resize operation. Later the code has been futher changed
to skip fs resize completely when size of LV is already matching
and finaly at the most recent resize changeset for resize the
check for matching size has been eliminated as well so we ended
with a request call to resize fs to 0 size in some cases.
This commit reoders some test so the prompt happens just once before
resize of possibly 2 related volumes.
Also extra test for having LV already given size is added, and
whole metadata update is skipped for this case as the only
result would be an increment of seqno.
However the filesystem is still resized when requested,
so if the LV has some size and the resize is resolved to
the same size, the filesystem resize is called so in case FS
would not match, the resize will happen.
raid0/raid0_meta type LVs don't have a default number of stripes when
created without '-i/--stripes Stripes' whereas other raid types have one.
Patch sets the default for raid0/raid0_meta to 2 stripes.
The default amount of stripes for raid4/5/10 is changed to 2 and for raid6 to 3
rather than using all PVs in the VG or those provided on the command line.
This is to avoid unintended high number of stripes in case of many PVs.
To select a different amount of stripes from the default,
use 'lvcreate -i/--stripes Stripes'.
A livelock occurs on extension in lv_manip when adjusting the region size,
which doesn't apply to any raid0/raid0_meta LVs (these don't have a bitmap).
Fix by prohibiting the region size adjustment on any such LVs.
Peter Rajnoha [Tue, 12 Jul 2016 07:52:18 +0000 (09:52 +0200)]
blkdeactivate: add -m|--mpathoption disablequeueing and use it for blk-availability systemd service and initscript
blkdeactivate -m disablequeueing causes "multipathd disablequeueing maps"
call inside blkdeactivate script before deactivating devices. This
avoids a situation where blkdeactivate may wait for paths to appear if
multipath is set to queueing and there's a stack of other devices and/or
mount points on top of such multipath device.
See also https://bugzilla.redhat.com/show_bug.cgi?id=1344381.
Reduce number of evualted pvcreate commands.
Since 0 is default value used to fill missing params,
and 0 is also 1st. value in array, it's being tested.
When logging to epoch files we would like to prevent creating too large
log files otherwise a spining command could fulfill available space
very easily and quickly.
Make the --filemap switch take no arguments and instead accept one
or more files on the command line to be mapped and placed into
groups.
This allows --filemap to be used with a glob:
# dmstats create --filemap *
rhel5.10-1.qcow2: Created new group with 87 region(s) as group ID 1564.
rhel5.10.qcow2: Created new group with 8 region(s) as group ID 1651.
rhel7.0-1.qcow2: Created new group with 11 region(s) as group ID 1659.
rhel7.0.qcow2: Created new group with 1454 region(s) as group ID 1670.
vm.img: Created new group with 2 region(s) as group ID 3124.
David Teigland [Fri, 8 Jul 2016 19:08:55 +0000 (14:08 -0500)]
lvconvert: allow splitcache on hidden/used cache pool
lvconvert --splitcache VG/CachePool_corig
Allow the split via the hidden/used cache pool for the time being,
since the new lvconvert code did intend to allow it, but was just
missing the exception in the list of hidden LVs that were allowed.
The preferred method for splitcache is to run it on the visible
cache LV, not the hidden cache pool. That may eventually become
the only method since we try to avoid running commands on
hidden LVs.
When a 'dmstats create --filemap' operation fails (e.g. during
open(2), close(2), or dm_stats_create_regions_from_fd()), use the
canonical version of the path. This avoids cryptic/confusing error
messages when symbolic links exist in the path argument given:
# dmstats create --filemap /var/lib/libvirt/images/my.img
Cannot map file: not a device-mapper device.
Could not create regions from file /var/lib/libvirt/images/my.img
Command failed
Using the canonical path the error is immediately obvious:
# dmstats create --filemap /var/lib/libvirt/images/my.img
Cannot map file: not a device-mapper device.
Could not create regions from file /boot/my.img
Command failed
Grouping is also useful in combination with --segments: creating a
group allows both individual segment data and data for the device
as a whole to be presented in the same report.
Support grouping for 'create --segments' in the same manner as for
'create --filemap'; group regions by default, applying an optional
alias specified with --alias, unless the user specifies --nogroup.
libdm: add aggregation support to dm_stats_get_histogram()
Support aggregate group and region histograms by allocating a new
histogram from the pool and populating it with a sum of the histogram
data for the areas contained in the region or group.
To avoid repeatedly summing the same histogram data, cache the pointer
in the group and regions structs for subsequent access. The aggregate
histograms are allocated from the same pool as the area histograms in
the corresponding handle and will be discarded at each list or populate
operation.
Bryn M. Reeves [Thu, 30 Jun 2016 20:48:10 +0000 (21:48 +0100)]
dmstats: add create --filemap
Add a new option to the create command to create regions that map the
extents of a file:
# dmstats create --filemap /path/to/file
/path/to/file: Created new group with 10 region(s) as group ID 0.
When performing a --filemap no device argument is required (and
supplying one results in error) since the device to bind to is implied
by the file path and is obtained directly from an fstat().
Grouping may be optionally disabled by the --nogroup switch: in this
case the command will report each region individually:
# dmstats create --nogroup --filemap /path/to/file
/path/to/file: Created new region with 1 area as region ID 0.
/path/to/file: Created new region with 1 area as region ID 1.
/path/to/file: Created new region with 1 area as region ID 2.
When grouping regions the group alias is automatically set to the
basename (as returned by dm_basename()) of the provided file.
This can be overridden to a user-defined value at the command line by
use of the --alias option.
If grouping is disabled no alias can be set.
Use of offset and subdivision options (--start, --length, --segments,
--areas, --areasize).
Setting aux_data and histograms for groups is possible but is not
currently implemented.
Bryn M. Reeves [Thu, 30 Jun 2016 20:46:43 +0000 (21:46 +0100)]
libdm: add dm_stats_create_regions_from_fd()
Add a call to create dmstats regions that correspond to the extents
present in a file descriptor open on a file in a local file system.
The file must reside on a file system type that correctly supports
physical extent location data in the FIEMAP ioctl.
Regions are optionally placed into a group with a user-defined alias.
File systems that do not support physical offsets in FIEMAP (btrfs
currently) are detected via fstatfs() - although attempting to map
a --filemap group on btrfs will fail anyway with the generic error
"Not on a device-mapper device" this is confusing; the file system
mount is on a device-mapper device, but btrfs' volume layer masks
this in the returned st_dev field since the returned logical file
extents may span multiple physical devices.
libdm: fix group resource leak in dm_stats_delete_region()
The function _stats_remove_region_id_from_group() incorecctly set
the group_id to DM_STATS_GROUP_NOT_PRESENT _before_ the call to
_stats_group_destroy(). This will cause the destroy function to
return immediately without doing anything:
Invalidating the ID in _stats_region_region_id_from_group() is
redundant anyway; it is rightly done as the last operation in
_stats_group_destroy (and it is not possible for anything to see
the old value between the two calls).
Remove the change to group_id to ensure that the alias and bitset
resources are correctly freed.
libdm: enclose dm_stats_walk_do/while() body in do..while
The call to dm_stats_walk_start() before the do statement makes
dm_stats_walk_do() behave inconsistently depending on context;
wrap them in an additional do { } while (0) so that the macro
always expands to a valid statement.
David Teigland [Wed, 6 Jul 2016 21:44:18 +0000 (16:44 -0500)]
lvconvert: allow converting type raid1 to type linear
The code could perform this conversion but ironically
did not recognize the standard command form, only the
the unpreferred "implication-based" command form.
"lvconvert --type linear VG/RaidLV" would fail, but
"lvconvert --mirrors 0 VG/RaidLV" would succeed.
David Teigland [Wed, 6 Jul 2016 21:33:25 +0000 (16:33 -0500)]
lvconvert: allow converting type mirror to type linear
The code could perform this conversion but ironically
did not recognize the standard command form, only the
the unpreferred "implication-based" command form.
"lvconvert --type linear VG/MirrorLV" would fail, but
"lvconvert --mirrors 0 VG/MirrorLV" would succeed.
libdm: check for empty aux_data in _parse_aux_data_group()
If after extracting stats arguments and group tags nothing remains
of aux_data but '-' set the region->aux_data field to the empty
string to match behaviour for non-grouped regions.
libdm: do not permit grouping regions with histograms
Although not harmful do not allow a group containing regions with
histograms since it is not currently possible to present histogram
data aggregated for the group.
libdm: check non-zero io count in _average_{rd,wr}_wait_time (Coverity)
Although a non-zero value for the number of ticks spent doing IO
should imply a non-zero number of IOs in the interval test for
this explicitly to avoid a divide-by-zero in the event of bad
counter data.
libdm: test for zero interval_ns in _utilization() (Coverity)
It's possible for interval_ns to be zero if the interval is not
set or the clock is misconfigured. Test for this before using the
value as the divisor in the utilisation calculation.
Make it clear that the "aux data" presented in reports is the user
data stored in the field (and does not include any library-internal
state such as group descriptors) by renaming the field to user_data
and changing the heading to "UserData".
git://sourceware.org / lvm2.git / log