Joseph Myers [Thu, 17 Mar 2016 12:15:51 +0000 (12:15 +0000)]
Remove __ASSUME_FALLOCATE.
Given current Linux kernel version requirements, we can always assume
the fallocate syscall to be available. This patch removes
__ASSUME_FALLOCATE and a test for whether __NR_fallocate is defined.
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_FALLOCATE):
Remove macro.
* sysdeps/unix/sysv/linux/wordsize-64/posix_fallocate.c: Do not
include <kernel-features.h>.
[!__ASSUME_FALLOCATE]: Remove conditional code.
(posix_fallocate) [__NR_fallocate]: Make code unconditional.
Carlos O'Donell [Wed, 16 Mar 2016 03:16:47 +0000 (23:16 -0400)]
Fix building glibc master with NDEBUG and --with-cpu.
When building on i686, x86_64, and arm, and with NDEBUG, or --with-cpu
there are various variables and functions which are unused based on
these settings.
This patch marks all such variables with __attribute__((unused)) to
avoid the compiler warnings when building with the aformentioned
options.
Joseph Myers [Tue, 15 Mar 2016 21:11:07 +0000 (21:11 +0000)]
Remove __ASSUME_PPOLL.
With current kernel version requirements, the ppoll Linux syscall can
be assumed to be present on all architectures; this patch removes the
__ASSUME_PPOLL macro and conditionals on it and on whether __NR_ppoll
is defined. (Note that the same can't yet be done for pselect,
because MicroBlaze only wired that up in the syscall table in 3.15.)
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by the patch.
* sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_PPOLL):
Remove macro.
* sysdeps/unix/sysv/linux/ppoll.c: Do not include
<kernel-features.h>.
[__NR_ppoll]: Make code unconditional.
[!__ASSUME_PPOLL]: Remove conditional code.
Joseph Myers [Tue, 15 Mar 2016 21:09:33 +0000 (21:09 +0000)]
Adjust kernel-features.h defaults for socket syscalls.
This patch adjusts the defaults for kernel-features.h macros relating
to availability of accept4, recvmmsg and sendmmsg. It is not intended
to affect which macros end up getting defined in any configuration.
At present, all architectures with syscalls for those functions need
to define __ASSUME_*_SYSCALL macros; in particular, any new
architecture needs its own kernel-features.h file for that purpose,
though it may not otherwise need such a header. Those macros are then
used together with __ASSUME_SOCKETCALL to define macros for whether
the functions in question are available.
This patch changes the defaults so that the syscalls are assumed to be
available by default with recent-enough kernels, and it is the
responsibility of architecture headers to undefine the macros if they
are unavailable in supported kernels at least as recent as the version
where the architecture-independent functionality was introduced. The
__ASSUME_<function> macros are defaulted similarly instead of being
defined based on other macros (defining based on other macros would no
longer work because the #undefs appear after the generic header is
included), so where the syscall being unavailable means the function
is unavailable this means the architecture header has to undefine the
__ASSUME_<function> macro; this only affects __ASSUME_ACCEPT4 for
ia64, as other cases where the syscalls were added late enough to be
relevant with current kernel version requirements are all on
socketcall architectures.
As a consequence, the AArch64 and Nios II kernel-features.h header
files are removed, and others simplified. When the minimum kernel
version becomes 4.3 or later on all architectures, the syscalls in
question can just be assumed unconditionally, permitting further
simplification.
Tested for x86_64, x86 and powerpc (that installed shared libraries
are unchanged by the patch, and testsuite for x86_64 and x86).
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Define unconditionally.
(__ASSUME_ACCEPT4): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Define.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h: Remove file.
* sysdeps/unix/sysv/linux/nios2/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Do not define.
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Do not define.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x030300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x030300].
[__LINUX_KERNEL_VERSION < 0x030300] (__ASSUME_ACCEPT4): Undefine.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x030300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x030300].
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
Andreas Schwab [Wed, 18 Nov 2015 14:45:59 +0000 (15:45 +0100)]
Fix resource leak in resolver (bug 19257)
The number of currently defined nameservers is stored in ->nscount,
whereas ->_u._ext.nscount is set by __libc_res_nsend only after local
initializations.
Joseph Myers [Thu, 10 Mar 2016 23:48:46 +0000 (23:48 +0000)]
Allow spurious underflow / inexact for ldbl-128ibm.
A large number of the test-ldouble failures seen for ldbl-128ibm are
spurious "underflow" and "inexact" exceptions. These arise from such
exceptions in the underlying arithmetic; unlike other spurious
exceptions from that arithmetic, they do not in general relate to
cases where the returned result is also substantially inaccurate, are
not so readily avoidable by appropriately conditional libgcc patches,
and are widespread enough to be hard to handle through individual
XFAILing of the affected tests.
Thus, this patch documents relaxed accuracy goals for libm functions
for IBM long double and makes libm-test.inc reflect these spurious
exceptions in ldbl-128ibm arithmetic and always allow them in
ldbl-128ibm testing (while still not allowing these exceptions to be
missing where required to be present). Tested for powerpc.
* manual/math.texi (Errors in Math Functions): Document relaxed
accuracy goals for IBM long double.
* math/libm-test.inc (test_exceptions): Always allow spurious
"underflow" and "inexact" exceptions for IBM long double.
H.J. Lu [Thu, 10 Mar 2016 13:26:46 +0000 (05:26 -0800)]
Add _arch_/_cpu_ to index_*/bit_* in x86 cpu-features.h
index_* and bit_* macros are used to access cpuid and feature arrays o
struct cpu_features. It is very easy to use bits and indices of cpuid
array on feature array, especially in assembly codes. For example,
sysdeps/i386/i686/multiarch/bcopy.S has
HAS_CPU_FEATURE (Fast_Rep_String)
which should be
HAS_ARCH_FEATURE (Fast_Rep_String)
We change index_* and bit_* to index_cpu_*/index_arch_* and
bit_cpu_*/bit_arch_* so that we can catch such error at build time.
[BZ #19762]
* sysdeps/unix/sysv/linux/x86_64/64/dl-librecon.h
(EXTRA_LD_ENVVARS): Add _arch_ to index_*/bit_*.
* sysdeps/x86/cpu-features.c (init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.h (bit_*): Renamed to ...
(bit_arch_*): This for feature array.
(bit_*): Renamed to ...
(bit_cpu_*): This for cpu array.
(index_*): Renamed to ...
(index_arch_*): This for feature array.
(index_*): Renamed to ...
(index_cpu_*): This for cpu array.
[__ASSEMBLER__] (HAS_FEATURE): Add and use field.
[__ASSEMBLER__] (HAS_CPU_FEATURE)): Pass cpu to HAS_FEATURE.
[__ASSEMBLER__] (HAS_ARCH_FEATURE)): Pass arch to HAS_FEATURE.
[!__ASSEMBLER__] (HAS_CPU_FEATURE): Replace index_##name and
bit_##name with index_cpu_##name and bit_cpu_##name.
[!__ASSEMBLER__] (HAS_ARCH_FEATURE): Replace index_##name and
bit_##name with index_arch_##name and bit_arch_##name.
Aurelien Jarno [Tue, 8 Mar 2016 23:25:00 +0000 (00:25 +0100)]
mips: terminate the FDE before the return trampoline in makecontext
In makecontext the FDE needs to be terminated before the return
trampoline otherwise backtrace called within a context created by
makecontext yields infinite backtrace.
This bug has been present for a long time, stdlib/tst-makecontext did
not fail until recent commit e535ce25. Tested on mips-linux-gnu and
mips64el-linux-gnuabi64 and mips-linux-gnu, no regression.
Joseph Myers [Wed, 9 Mar 2016 00:30:59 +0000 (00:30 +0000)]
Fix ldbl-128ibm nearbyintl in non-default rounding modes (bug 19790).
The ldbl-128ibm implementation of nearbyintl uses logic that only
works in round-to-nearest mode. This contrasts with rintl, which
works in all rounding modes.
Now, arguably nearbyintl could simply be aliased to rintl, given that
spurious "inexact" is generally allowed for ldbl-128ibm, even for the
underlying arithmetic operations. But given that the only point of
nearbyintl is to avoid "inexact", this patch follows the more
conservative approach of adding conditionals to the rintl
implementation to make it suitable for use to implement nearbyintl,
then builds it for nearbyintl with USE_AS_NEARBYINTL defined. The
test test-nearbyint-except-2 shows up issues when traps on "inexact"
are enabled, which turn out to be problems with the powerpc
fenv_private.h implementation (two functions that should disable
exception traps potentially failing to do so in some cases); this
patch duly fixes that as well (I don't see any other existing cases
where this would be user-visible; there isn't much use of *_NOEX,
*hold* etc. in libm that requires exceptions to be discarded and not
trapped on).
Tested for powerpc.
[BZ #19790]
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c [USE_AS_NEARBYINTL]
(rintl): Define as macro.
[USE_AS_NEARBYINTL] (__rintl): Likewise.
(__rintl) [USE_AS_NEARBYINTL]: Use SET_RESTORE_ROUND_NOEX instead
of fesetround. Ensure results are evaluated before end of scope.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Define
USE_AS_NEARBYINTL and include s_rintl.c.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc):
Disable exception traps in new environment.
(libc_feholdsetround_ppc_ctx): Likewise.
powerpc: Remove uses of operand modifier (%s) in inline asm
The operand modifier %s on powerpc is an undocumented internal implementation
detail of GCC. Besides that, the GCC community wants to remove it. This patch
rewrites the expressions that use this modifier with logically equivalent
expressions that don't require it.
Explanation for the substitution:
The %s modifier takes an immediate operand and prints 32 less such immediate.
Thus, in the previous code, the expression resulted in:
32 - __builtin_ffs(e)
where e was guaranteed to have exactly a single bit set, by the following
expressions:
(e & (e-1) == 0) : e has at most one bit set.
(e != 0) : e is not zero, thus it has at least one bit set.
Since we guarantee that there is exactly only one bit set, the following
statement is true:
32 - __builtin_ffs(e) == __builtin_clz(e)
Thus, we can replace __builtin_ffs with __builtin_clz and remove the %s operand
modifier.
HWCAP-related code should had been updated when the 32 bits of HWCAP were
used. This patch updates the code in dl-procinfo.h to loop through all
the 32 bits in HWCAP and updates _dl_powerpc_cap_flags accordingly.
Joseph Myers [Tue, 8 Mar 2016 00:27:21 +0000 (00:27 +0000)]
Fix ldbl-128ibm remainderl equality test for zero low part (bug 19677).
The ldbl-128ibm implementation of remainderl has logic resulting in
incorrect tests for equality of the absolute values of the arguments
in the case of zero low parts. If the low parts are both zero but
with different signs, this can wrongly cause equal arguments to be
treated as different, resulting in turn in incorrect signs of zero
result in nondefault rounding modes arising from the subtractions done
when the arguments are not equal.
This patch fixes the logic to convert -0 low parts into +0 before the
comparison (remquo already has separate logic to deal with signs of
zero results, so doesn't need such a change). Tests are added for
remainderl and remquol similar to that for fmodl, and based on a
refactoring of it, since the bug depends on low parts which should not
be relied upon in tests not setting the representation explicitly
(although in fact the bug shows up in test-ldouble with current GCC).
Tested for powerpc.
[BZ #19677]
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
(__ieee754_remainderl): Put zero low parts in canonical form.
* sysdeps/ieee754/ldbl-128ibm/test-fmodrem-ldbl-128ibm.c: New
file. Based on
sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c.
* sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: Replace
with wrapper round test-fmodrem-ldbl-128ibm.c.
* sysdeps/ieee754/ldbl-128ibm/test-remainderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/test-remquol-ldbl-128ibm.c:
Likewise.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
test-remainderl-ldbl-128ibm and test-remquol-ldbl-128ibm.
Hongjiu Zhang [Mon, 7 Mar 2016 01:18:21 +0000 (20:18 -0500)]
sln: use stat64
When using sln on some filesystems which return 64-bit inodes,
the stat call might fail during install like so:
.../elf/sln .../elf/symlink.list
/lib32/libc.so.6: invalid destination: Value too large for defined data type
/lib32/ld-linux.so.2: invalid destination: Value too large for defined data type
Makefile:104: recipe for target 'install-symbolic-link' failed
Switch to using stat64 all the time to avoid this.
Florian Weimer [Mon, 7 Mar 2016 12:48:47 +0000 (13:48 +0100)]
test-skeleton.c: Do not set RLIMIT_DATA [BZ #19648]
With older kernels, it is mostly ineffective because it causes malloc
to switch from sbrk to mmap (potentially invalidating malloc testing
compared to what real appliations do). With newer kernels which
have switched to enforcing RLIMIT_DATA for mmap as well, some test
cases will fail in an unintended fashion because the limit which was
set previously does not include room for all mmap mappings.
This patch implements a new posix_spawn{p} implementation for Linux. The main
difference is it uses the clone syscall directly with CLONE_VM and CLONE_VFORK
flags and a direct allocated stack. The new stack and start function solves
most the vfork limitation (possible parent clobber due stack spilling). The
remaning issue are related to signal handling:
1. That no signal handlers must run in child context, to avoid corrupt
parent's state.
2. Child must synchronize with parent to enforce stack deallocation and
to possible return execv issues.
The first one is solved by blocking all signals in child, even NPTL-internal
ones (SIGCANCEL and SIGSETXID). The second issue is done by a stack allocation
in parent and a synchronization with using a pipe or waitpid (in case or error).
The pipe has the advantage of allowing the child signal an exec error (checked
with new tst-spawn2 test).
There is an inherent race condition in pipe2 usage for architectures that do not
support the syscall directly. In such cases the a pipe plus fctnl is used
instead and it may lead to file descriptor leak in parent (as decribed by fcntl
documentation).
The child process stack is allocate with a mmap with MAP_STACK flag using
default architecture stack size. Although it is slower than use a stack buffer
from parent, it allows some slack for the compatibility code to run scripts
with no shebang (which may use a buffer with size depending of argument list
count).
Performance should be similar to the vfork default posix implementation and
way faster than fork path (vfork on mostly linux ports are basically
clone with CLONE_VM plus CLONE_VFORK). The only difference is the syscalls
required for the stack allocation/deallocation.
This patch removes all the dynamic allocation on execvpe code and
instead use direct stack allocation. This is QoI approach to make
it possible use in scenarios where memory is shared with parent
(vfork or clone with CLONE_VM).
For default process spawn (script file without a shebang), stack
allocation is bounded by NAME_MAX plus PATH_MAX plus 1. Large
file arguments returns an error (ENAMETOOLONG). This differs than
current GLIBC pratice in general, but it used to limit stack
allocation for large inputs. Also, path in PATH environment variable
larger than PATH_MAX are ignored.
The shell direct execution exeception, where execve returns ENOEXEC,
might requires a large stack allocation due large input argument list.
posix: Remove dynamic memory allocation from execl{e,p}
GLIBC execl{e,p} implementation might use malloc if the total number of
arguments exceed initial assumption size (1024). This might lead to
issues in two situations:
1. execl/execle is stated to be async-signal-safe by POSIX [1]. However
if execl is used in a signal handler with a large argument set (that
may call malloc internally) and if the resulting call fails it might
lead malloc in the program in a bad state.
2. If the functions are used in a vfork/clone(VFORK) situation it also
might issue malloc internal bad state.
This patch fixes it by using stack allocation instead. It also fixes
BZ#19534.
H.J. Lu [Fri, 4 Mar 2016 16:37:40 +0000 (08:37 -0800)]
x86-64: Fix memcpy IFUNC selection
Chek Fast_Unaligned_Load, instead of Slow_BSF, and also check for
Fast_Copy_Backward to enable __memcpy_ssse3_back. Existing selection
order is updated with following selection order:
1. __memcpy_avx_unaligned if AVX_Fast_Unaligned_Load bit is set.
2. __memcpy_sse2_unaligned if Fast_Unaligned_Load bit is set.
3. __memcpy_sse2 if SSSE3 isn't available.
4. __memcpy_ssse3_back if Fast_Copy_Backward bit it set.
5. __memcpy_ssse3
[BZ #18880]
* sysdeps/x86_64/multiarch/memcpy.S: Check Fast_Unaligned_Load,
instead of Slow_BSF, and also check for Fast_Copy_Backward to
enable __memcpy_ssse3_back.
Joseph Myers [Fri, 26 Feb 2016 16:17:25 +0000 (16:17 +0000)]
Remove kernel-features.h conditionals on pre-3.2 kernels.
This patch follows up on the increase in minimum kernel version by
removing conditionals in non-x86, non-x86_64 kernel-features.h headers
that are now constant for all supported kernel versions.
Carlos O'Donell [Thu, 25 Feb 2016 01:06:04 +0000 (20:06 -0500)]
Enable --localedir to set message catalog directory (Bug 14259)
In 1999 the project split "localedir" into "localedir" (path to compiled
locale archives) and "msgcatdir" (path to message catalogs). This
predates the 2002 change in the GNU Coding Standard to document the use
of "localedir" for the path to the message catalogs. It appears that
newlib, gcc, and several other projects also used "msgcatdir" at one
point or another in the past, and so it is in line with historical
precedent that glibc would also use "msgcatdir." However, given that the
GNU Coding Standard uses "localedir", we will switch to that for
consistency as a GNU project. Previous uses of --localdir didn't work
anyway (see bug 14259).
I am committing this patch in the understanding that nobody would object
to fixing #14259 as part of aligning our variable usage to the GNU
Coding Standard.
Given that previous "localedir" uses were converted to "complocaledir"
by [1], we can now convert "msgcatdir" to "localedir" and complete the
transition. With an addition to config.make.in we also fix bug 14259 and
allow users to specify the locale dependent data directory with
"--localedir" at configure time. There is still no way to control at
configure time the location of the *compiled* locale directory.
Tested on x86_64 with no regressions.
Tested using "--localedir" to specify alternate locale dependent data
directory and verified with "make install DESTDIR=/tmp/glibc".
Joseph Myers [Wed, 24 Feb 2016 17:15:12 +0000 (17:15 +0000)]
Require Linux 3.2 except on x86 / x86_64, 3.2 headers everywhere.
In <https://sourceware.org/ml/libc-alpha/2016-01/msg00885.html> I
proposed a minimum Linux kernel version of 3.2 for glibc 2.24, since
Linux 2.6.32 has reached EOL.
In the discussion in February, some concerns were expressed about
compatibility with OpenVZ containers. It's not clear that these are
real issues, given OpenVZ backporting kernel features and faking the
kernel version for guest software, as discussed in
<https://sourceware.org/ml/libc-alpha/2016-02/msg00278.html>. It's
also not clear that supporting running GNU/Linux distributions from
late 2016 (at the earliest) on a kernel series from 2009 is a sensible
expectation. However, as an interim step, this patch increases the
requirement everywhere except x86 / x86_64 (since the controversy was
only about those architectures); the special caveats and settings can
easily be removed later when we're ready to increase the requirements
on x86 / x86_64 (and if someone would like to raise the issue on LWN
as suggested in the previous discussion, that would be welcome). 3.2
kernel headers are required everywhere by this patch.
(x32 already requires 3.4 or later, so is unaffected by this patch.)
As usual for such a change, this patch only changes the configure
scripts and associated documentation. The intent is to follow up with
removal of dead __LINUX_KERNEL_VERSION conditionals. Each __ASSUME_*
or other macro that becomes dead can then be removed independently.
Tested for x86_64 and x86.
* sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION):
Define to 3.2.0.
(arch_minimum_kernel): Likewise.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel):
Define to 2.6.32.
* sysdeps/unix/sysv/linux/i386/configure: Regenerated.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac
(arch_minimum_kernel): Define to 2.6.32.
* sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated.
* README: Document Linux 3.2 requirement.
* manual/install.texi (Linux): Document Linux 3.2 headers
requirement.
* INSTALL: Regenerated.
HAVE_BUILTIN_EXPECT macro was removed by commit glibc-2.14-280-g3ce1f29,
but then its use was unintentionally reintroduced during merge with GNU
gettext 0.19.3 by commit glibc-2.20-324-g6d24885, effectively disabling
all optimization based on __builtin_expect. As intl files are also part
of GNU gettext, HAVE_BUILTIN_EXPECT macro cannot be removed, so define
it unconditionally in config.h.in instead.
[BZ #19512]
* config.h.in (HAVE_BUILTIN_EXPECT): New macro.
Stefan Liebler [Mon, 22 Feb 2016 16:44:41 +0000 (17:44 +0100)]
Add missing inclusion of libc-internal.h.
The build of posix/tst-dir.c fails due to undefined DIAG_* macros.
The usage of the macros were introduced in recent commit 7584a3f96de88d5eefe5d6c634515278cbfbf052
"Deprecate readdir_r, readdir64_r [BZ #19056]".
This patch adds the missing header libc-internal.h.
__tls_get_addr may be called with 8-byte stack alignment. Although
this bug has been fixed in GCC 4.9.4, 5.3 and 6, we can't assume
that stack will be always aligned at 16 bytes. Since SSE optimized
memory/string functions with aligned SSE register load and store are
used in the dynamic linker, we must set DL_RUNTIME_UNALIGNED_VEC_SIZE
to 8 so that _dl_runtime_resolve_sse will align the stack before
calling _dl_fixup:
Mark Wielaard [Fri, 29 Jan 2016 08:49:01 +0000 (09:49 +0100)]
elf/elf.h: Add new 386 and X86_64 relocations from binutils.
The following new 386 and X86_64 were added to binutils. They are
non-dynamic relocations, so don't need direct handling in glibc.
But other programs, like elfutils, use the glibc elf.h definitions
for the names and numbers when inspecting ET_REL files.
R_386_GOT32X was proposed in
https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I
X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX were proposed in
https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0
There also used to be R_X86_64_PC32_BND and R_X86_64_PLT32_BND
but those already got deprecated in
https://groups.google.com/d/msg/x86-64-abi/-hdQyMixt8Y/XFDOvioG85cJ
Mike Frysinger [Tue, 19 Jan 2016 14:18:00 +0000 (09:18 -0500)]
test-skeleton: increase default TIMEOUT to 20 seconds
The vast majority of timeouts I've seen w/glibc tests are due to:
- slow system (e.g. <1 GHz cpu)
- loaded system (e.g. lots of parallelism)
Even then, I've seen timeouts on system I don't generally consider
slow, or even loaded, and considering TIMEOUT is set to <=10 in ~60
tests (and <=20 in ~75 tests), it seems I'm not alone. I've just
gotten in the habit of doing `export TIMEOUTFACTOR=10` on all my
setups.
In the edge case where there is a bug in the test and the timeout is
hit, I think we all agree that's either a problem with the test or a
real bug in the library somewhere. In either case, the incident rate
should be low, so catering to that seems like the wrong trade-off.
Other developers too usually set large timeout factors. Increase the
default to 20 seconds to match reality.
From the bug:
Netherlands Antilles was dissolved, and "AN" is not a part of ISO 3166
anymore. According to setlocale(3), "territory is an ISO 3166 country
code". We now have pap_AW and pap_CW.
Reported-by: Chris Leonard <cjlhomeaddress@gmail.com>
This updates a bunch of locales based on CLDR v28 data:
ar_SS: int_prefix: changing 249 to 211
bn_BD: int_prefix: changing 88 to 880
dz_BT: int_prefix: changing 66 to 975
en_HK: int_prefix: changing to 852
en_PH: int_prefix: changing to 63
en_SG: int_prefix: changing to 65
es_DO: int_prefix: changing 1809 to 1
es_PA: int_prefix: changing 502 to 507
es_PR: int_prefix: changing 1787 to 1
km_KH: int_prefix: changing 856 to 855
mt_MT: int_prefix: changing to 356
ne_NP: int_prefix: changing 91 to 977
pap_AW: int_prefix: changing 599 to 297
the_NP: int_prefix: changing 91 to 977
tk_TM: int_prefix: changing to 993
uz_UZ: int_prefix: changing 27 to 998
zh_SG: int_prefix: changing to 65
I've also checked these against https://countrycode.org/.
Note: the Dominican Republic (DO) and Puerto Rico (PR) updates are
correct: they both use +1. Historically, DO had one area code of
809 and PR of 787 which is why they were listed as such, but they
have both expanded into 829 and 989 respectively, so using the four
digit value is def incorrect now.
Joseph Myers [Fri, 19 Feb 2016 17:19:53 +0000 (17:19 +0000)]
Fix ldbl-128ibm nextafterl, nexttowardl sign of zero result (bug 19678).
The ldbl-128ibm implementation of nextafterl / nexttowardl returns -0
in FE_DOWNWARD mode when taking the next value below the least
positive subnormal, when it should return +0. This patch fixes it to
check explicitly for this case.
Tested for powerpc.
[BZ #19678]
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Ensure +0.0 is returned when taking the next value below the least
positive value.
Florian Weimer [Fri, 19 Feb 2016 16:00:47 +0000 (17:00 +0100)]
res_ninit: Update comment
Since commit e66e7419a6f58200eec6941b14e2dcff9875cc6c (Actually make
it possible to user the default name server.), the default is
INADDR_LOOPBACK, not INADDR_ANY.
The ldbl-128ibm implementation of powl has some problems in the case
of overflow or underflow, which are mainly visible in non-default
rounding modes.
* When overflow or underflow is detected early, the correct sign of an
overflowing or underflowing result is not allowed for. This is
mostly hidden in the default rounding mode by the errno-setting
wrappers recomputing the result (except in non-default
error-handling modes such as -lieee), but visible in other rounding
modes where a result that is not zero or infinity causes the
wrappers not to do the recomputation.
* The final scaling is done before the sign is incorporated in the
result, but should be done afterwards for correct overflowing and
underflowing results in directed rounding modes.
This patch fixes those problems. Tested for powerpc.
[BZ #19674]
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Include
sign in overflowing and underflowing results when overflow or
underflow is detected early. Include sign in result before rather
than after scaling.
The ldbl-128ibm implementations of remainderl and remquol have logic
resulting in incorrect tests for equality of the absolute values of
the arguments. Equality is tested based on the integer
representations of the high and low parts, with the sign bit masked
off the high part - but when this changes the sign of the high part,
the sign of the low part needs to be changed as well, and failure to
do this means arguments are wrongly treated as equal when they are
not.
This patch fixes the logic to adjust signs of low parts as needed.
Tested for powerpc.
[BZ #19603]
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
(__ieee754_remainderl): Adjust sign of integer version of low part
when taking absolute value of high part.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
* math/libm-test.inc (remainder_test_data): Add another test.
(remquo_test_data): Likewise.
Joseph Myers [Thu, 18 Feb 2016 22:54:07 +0000 (22:54 +0000)]
Fix ldbl-128ibm fmodl handling of equal arguments with low part zero (bug 19602).
The ldbl-128ibm implementation of fmodl has logic to detect when the
first argument has absolute value less than or equal to the second.
This logic is only correct for nonzero low parts; if the high parts
are equal and the low parts are zero, then the signs of the low parts
(which have no semantic effect on the value of the long double number)
can result in equal values being wrongly treated as unequal, and an
incorrect result being returned from fmodl. This patch fixes this by
checking for the case of zero low parts.
Although this does show up in tests from libm-test.inc (both tests of
fmodl, and, indirectly, of remainderl / dreml), the dependence on
non-semantic zero low parts means that test shouldn't be expected to
reproduce it reliably; thus, this patch adds a standalone test that
sets up affected values using unions.
Tested for powerpc.
[BZ #19602]
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Handle
equal high parts and both low parts zero specially.
* sysdeps/ieee754/ldbl-128ibm/test-fmodl-ldbl-128ibm.c: New test.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-fmodl-ldbl-128ibm.
Joseph Myers [Thu, 18 Feb 2016 22:42:06 +0000 (22:42 +0000)]
Fix ldbl-128ibm fmodl handling of subnormal results (bug 19595).
The ldbl-128ibm implementation of fmodl has completely bogus logic for
subnormal results (in this context, that means results for which the
result is in the subnormal range for double, not results with absolute
value below LDBL_MIN), based on code used for ldbl-128 that is correct
in that case but incorrect in the ldbl-128ibm use. This patch fixes
it to convert the mantissa into the correct form expected by
ldbl_insert_mantissa, removing the other cases of the code that were
incorrect and in one case unreachable for ldbl-128ibm. A correct
exponent value is then passed to ldbl_insert_mantissa to reflect the
shifted result.
Tested for powerpc.
[BZ #19595]
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c (__ieee754_fmodl): Use
common logic for all cases of shifting subnormal results. Do not
insert sign bit in shifted mantissa. Always pass -1023 as biased
exponent to ldbl_insert_mantissa in subnormal case.
Joseph Myers [Thu, 18 Feb 2016 22:24:32 +0000 (22:24 +0000)]
Fix ldbl-128ibm roundl for non-default rounding modes (bug 19594).
The ldbl-128ibm implementation of roundl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases). This patch reimplements it along
the lines used for floorl, ceill and truncl, using __round on the high
part, and on the low part if the high part is an integer, and then
adjusting in the cases where this is incorrect.
Tested for powerpc.
[BZ #19594]
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Use __round
on high and low parts then adjust result and use
ldbl_canonicalize_int if needed.
Joseph Myers [Thu, 18 Feb 2016 21:52:07 +0000 (21:52 +0000)]
Fix ldbl-128ibm truncl for non-default rounding modes (bug 19593).
The ldbl-128ibm implementation of truncl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of trunc, when it seems more
natural to take the truncation of the high part (__trunc optimized
inline versions can be used), and the floor or ceiling of the low part
(depending on the sign of the high part) if the high part is an
integer, as was done for floorl and ceill. This patch makes it use
that simpler approach.
Tested for powerpc.
[BZ #19593]
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Use __trunc
on high part and __floor or __ceil on low part then use
ldbl_canonicalize_int if needed.
Joseph Myers [Thu, 18 Feb 2016 21:40:39 +0000 (21:40 +0000)]
Fix ldbl-128ibm ceill for non-default rounding modes (bug 19592).
The ldbl-128ibm implementation of ceill is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of ceil, when it seems more
natural to take the ceiling of the high part (__ceil optimized inline
versions can be used), and that of the low part if the high part is an
integer, as was done for floorl. This patch makes it use that simpler
approach.
Tested for powerpc.
[BZ #19592]
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Use __ceil on
high and low parts then use ldbl_canonicalize_int if needed.
Joseph Myers [Thu, 18 Feb 2016 21:31:10 +0000 (21:31 +0000)]
Fix ldbl-128ibm floorl for non-default rounding modes (bug 17899).
The ldbl-128ibm implementation of floorl is only correct in
round-to-nearest mode (in other modes, there are incorrect results and
overflow exceptions in some cases going beyond the incorrect signs of
zero results noted in bug 17899). It is also unnecessarily
complicated, rounding both high and low parts to the nearest integer
and then adjusting for the semantics of floor, when it seems more
natural to take the floor of the high part (__floor optimized inline
versions can be used), and that of the low part if the high part is an
integer. This patch makes it use that simpler approach, with a
canonicalization that works in all rounding modes (given that the only
way the result can be noncanonical is if taking the floor of a
negative noninteger low part increased its exponent).
Tested for powerpc, where over a thousand failures are removed from
test-ldouble.out (floorl problems affect many powl tests).
[BZ #17899]
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int):
New function.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Use __floor
on high and low parts then use ldbl_canonicalize_int if needed.
git://sourceware.org / glibc.git / log