Joseph Myers [Thu, 2 Jan 2014 16:33:06 +0000 (16:33 +0000)]
Fix ldbl-128ibm acoshl inaccuracy (bug 16384).
This patch fixes bug 16384, ldbl-128ibm acoshl inaccuracy, which
showed up while attempting to regenerate ulps for powerpc-nofpu for
2.19. There were two separate problems, use of __log1p instead of
__log1pl and an insufficiently accurate constant value for log 2
(which this patch replaces by use of M_LN2l), each of which could
cause substantial inaccuracy in affected cases.
Tested for powerpc-nofpu.
* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c (ln2): Initialize with
M_LN2l.
(__ieee754_acoshl): Use __log1pl not __log1p.
Fix return code from getent netgroup when the netgroup is not found (bz #16366)
nscd incorrectly returns a success even when the netgroup in question
is not found and adds a positive result in the cache. this patch
fixes this behaviour by adding a negative lookup entry to cache and
returning an error when the netgroup is not found.
Fix infinite loop in nscd when netgroup is empty (bz #16365)
Currently, when a user looks up a netgroup that does not have any
members, nscd goes into an infinite loop trying to find members in the
group. This is because it does not handle cases when getnetgrent
returns an NSS_STATUS_NOTFOUND (which is what it does on empty group).
Fixed to handle this in the same way as NSS_STATUS_RETURN, similar to
what getgrent does by itself.
Add a comprehensive number of inputs for all branches in sin and cos
computation, excluding the fast paths. This also adds a number of
inputs for the multiple precision slow paths.
Add a more comprehensive set of inputs for the atan function. I have
also fixed the name on the multiple precision fallback inputs (I
couldn't find any new inputs there) to reflect the fact that the
fallback is only 144bits and not 768bits as I had earlier mentioned.
Like sinh and cosh, this patch has benchmark inputs for asinh and
acosh, generated using a random number generator and spread over
significant branches, ignoring the fast return paths.
Add a full set of inputs for sinh and cosh functions generated using a
random number generator and spreading it over all branches in the
function, ignoring the fast paths (i.e. immediate return for special
values).
The new tst-setjmp-fp test has been failing on IA64 because the setjmp
and longjmp helpers take care of saving/restoring the fpsr register.
Per the C standards, this is incorrect, so disable that logic.
URL: https://sourceware.org/bugzilla/show_bug.cgi?id=16379 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 24 Dec 2013 10:33:28 +0000 (05:33 -0500)]
ia64: ioperm: clean up long dead code
This file has a few #if 0 code paths which cause a build time warning:
ports/sysdeps/unix/sysv/linux/ia64/ioperm.c:66:7: warning:
variable 'prot' set but not used [-Wunused-but-set-variable]
Rather than add more #if 0 around that variable, just delete the code
altogether. Not like it's going to ever be implemented.
Brooks Moses [Thu, 12 Dec 2013 01:46:46 +0000 (17:46 -0800)]
Define __CORRECT_ISO_CPP_STRING_H_PROTO correctly for Clang.
In the string/string.h and string/strings.h headers, we have a couple
of macros that "tell the caller that we provide correct C++
prototypes" according to the comment; they are used to determine
whether to wrap some prototypes in "extern "C++"" (and provide
multiple overloads of them, and some other magic) when __cplusplus is
defined.
The macros are set to check for sufficiently-recent GCC versions (4.4
and later), but this is not the right check for non-GCC compilers. In
particular, these macros should also be set when using Clang -- if
they are not set, then Clang will be unable to correctly diagnose a
number of subtle bugs that will be errors in GCC compilations.
As per discussion on earlier versions of this patch, rather than
restrict the fix to Clang per se, we assume that all C++ compilers that
claim to fully support C++98 are using a standard-conforming C++
standard library, which seems pretty reasonable. Clang has been
providing an appropriate value of __cplusplus since May 2012.
Maxim Kuvyrkov [Mon, 23 Dec 2013 20:44:50 +0000 (09:44 +1300)]
Fix race in free() of fastbin chunk: BZ #15073
Perform sanity check only if we have_lock. Due to lockless nature of fastbins
we need to be careful derefencing pointers to fastbin entries (chunksize(old)
in this case) in multithreaded environments.
The fix is to add have_lock to the if-condition checks. The rest of the patch
only makes code more readable.
* malloc/malloc.c (_int_free): Perform sanity check only if we
have_lock.
Joseph Myers [Sun, 22 Dec 2013 20:50:16 +0000 (20:50 +0000)]
Fix ldbl-128 lgammal for small negative arguments (bug 16337).
This patch fixes bug 16337, ldbl-128 lgammal spurious overflows for
small negative arguments (the arguments in question are already in the
testsuite). The implementation uses the reflection formula to compute
lgamma of negative x from lgamma of -x, effectively resulting in a
calculation -log(x^2) + log(-x); cancellation isn't problematic in
this case (bugs for problematic cancellation in lgamma are 2542, 2543,
2558), but the x^2 calculation can underflow (in which case there is
spurious logic to return an overflowing value - lgamma can only ever
correctly overflow for large positive arguments, though tgamma can
overflow for small arguments of either sign as well as large positive
arguments). The fix is simply to calculate the result directly with
logl when the argument is a small enough negative number.
Tested mips64.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Calculate results for small negative arguments directly rather
than using reflection formula with special underflow handling.
Joseph Myers [Sun, 22 Dec 2013 14:49:48 +0000 (14:49 +0000)]
Flatten sysdeps/unix/bsd/bsd4.4 into sysdeps/unix/bsd.
As discussed in
<https://sourceware.org/ml/libc-alpha/2012-04/msg00840.html> and
<https://sourceware.org/ml/libc-alpha/2012-04/msg00989.html>, it seems
appropriate to flatten sysdeps/unix/bsd/bsd4.4 into sysdeps/unix/bsd.
The bulk of the patch is just moving files. The only other changes
are: update paths in sysdeps/mach/hurd/Implies and
sysdeps/unix/sysv/linux/wait3.c; merge the two syscalls.list files,
with the removal of syscalls that were in
sysdeps/unix/bsd/syscalls.list but overridden in the bsd4.4 directory
by .c files there.
Tested x86_64. The installed shared libraries are identical before
and after the patch except for libc.so where the move of wait3.c
(included by sysdeps/unix/sysv/linux/wait3.c) affects debug info, but
the disassembly is unchanged.
* sysdeps/mach/hurd/Implies: Change unix/bsd/bsd4.4 to unix/bsd.
* sysdeps/unix/bsd/syscalls.list (chflags): Add entry from
sysdeps/unix/bsd/bsd4.4/syscalls.list.
(fchflags): Likewise.
(revoke): Likewise.
(setlogin): Likewise.
(sigaltstack): Likewise.
(wait4): Likewise.
(sigblock): Remove.
(sigsetmask): Likewise.
(wait3): Likewise.
(waitpid): Likewise.
* sysdeps/unix/bsd/bsd4.4/syscalls.list: Remove file.
* sysdeps/unix/sysv/linux/wait3.c: Update directory of included
file.
* sysdeps/unix/bsd/bsd4.4/Makefile: Move to ...
* sysdeps/unix/bsd/Makefile: ... here.
* sysdeps/unix/bsd/bsd4.4/Versions: Move to ...
* sysdeps/unix/bsd/Versions: ... here.
* sysdeps/unix/bsd/bsd4.4/bits/sockaddr.h: Move to ...
* sysdeps/unix/bsd/bits/sockaddr.h: ... here.
* sysdeps/unix/bsd/bsd4.4/cmsg_nxthdr.c: Move to ...
* sysdeps/unix/bsd/cmsg_nxthdr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigblock.c: Move to ...
* sysdeps/unix/bsd/sigblock.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigsetmask.c: Move to ...
* sysdeps/unix/bsd/sigsetmask.c: ... here.
* sysdeps/unix/bsd/bsd4.4/sigvec.c: Move to ...
* sysdeps/unix/bsd/sigvec.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcdrain.c: Move to ...
* sysdeps/unix/bsd/tcdrain.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcgetattr.c: Move to ...
* sysdeps/unix/bsd/tcgetattr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/tcsetattr.c: Move to ...
* sysdeps/unix/bsd/tcsetattr.c: ... here.
* sysdeps/unix/bsd/bsd4.4/wait.c: Move to ...
* sysdeps/unix/bsd/wait.c: ... here.
* sysdeps/unix/bsd/bsd4.4/wait3.c: Move to ...
* sysdeps/unix/bsd/wait3.c: ... here.
* sysdeps/unix/bsd/bsd4.4/waitpid.c: Move to ...
* sysdeps/unix/bsd/waitpid.c: ... here.
Joseph Myers [Sat, 21 Dec 2013 13:07:16 +0000 (13:07 +0000)]
Fix x86 / x86_64 expl / expl10l wild results in directed rounding modes (bug 16356).
This patch fixes bug 16356, bad results from x86 / x86_64 expl /
exp10l in directed rounding modes, the most serious of the bugs shown
up by my patch expanding libm test coverage. When I fixed bug 16293,
I thought it was only necessary to set round-to-nearest when using
frndint in expm1 functions, because in other cases the cancellation
error from having the resulting fractional part close to 1 or -1 would
not be significant. However, in expl and exp10l, the way the final
fractional part gets computed (something more complicated than a
simple subtraction, because more precision is needed than you'd get
that way) can result in a value outside the range [-1, 1] when the
argument to frndint was very close to an integer and was rounded the
"wrong" way because of the rounding mode - and the f2xm1 instruction
has undefined results if its argument is outside [-1, 1], so resulting
in the large errors seen. So this patch removes the USE_AS_EXPM1L
conditionals on the round-to-nearest settings, so all of expl, expm1l
and exp10l now get round-to-nearest used for frndint (meaning the
final fractional part can at most be slightly above 0.5 in
magnitude). Associated tests of exp and exp10 are added and testing
of exp10 in directed rounding modes enabled.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Also set
round-to-nearest for [!USE_AS_EXPM1L].
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise.
* math/auto-libm-test-in: Do not expect cosh tests to fail. Add
more tests of exp and exp10. Expect some exp10 tests to miss
exceptions or fail in directed rounding modes.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (exp10_tonearest_test_data): New array.
(exp10_test_tonearest): New function.
(exp10_towardzero_test_data): New array.
(exp10_test_towardzero): New function.
(exp10_downward_test_data): New array.
(exp10_test_downward): New function.
(exp10_upward_test_data): New array.
(exp10_test_upward): New function.
(main): Call the new functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Fri, 20 Dec 2013 21:03:39 +0000 (21:03 +0000)]
Add more libm-test coverage of [a-c]* real functions.
Various libm functions have inadequate test coverage in libm-test.inc
/ auto-libm-test-in - failing to cover all the usual special cases
(infinities, NaNs, zero, large and small finite values, subnormals) as
well as a reasonable range of ordinary inputs and, where appropriate,
inputs close to the thresholds for underflow and overflow.
This patch improves test coverage for real functions [a-c]* (with the
expectation of adding more coverage for other functions later).
Tested x86_64 and x86 and ulps updated accordingly (and eight glibc
bugs and one C11 DR filed for issues found in the process).
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cbrt, cos and cosh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (acosh_test_data): Add more tests.
(atanh_test_data): Likewise.
(ceil_test_data): Likewise.
(copysign_test_data): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Fri, 20 Dec 2013 13:10:07 +0000 (13:10 +0000)]
Update timezone code from tzcode 2013i.
Now we have Paul's support for version-3 tz files checked in, this
patch updates all the code we take (unmodified) from tzcode to version
2013i (which includes the support for generating version-3 tz files
where necessary).
Joseph Myers [Fri, 20 Dec 2013 12:32:44 +0000 (12:32 +0000)]
Move various TEST_c_c tests from libm-test.inc to auto-libm-test-inc.
This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and
ctanh to auto-libm-test-in, adding the required support to
gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now
(although the relevant table entries are put in gen-auto-libm-tests
for it to know how to handle them): clog10 because of a known MPC bug
causing it to hang for at least some pure imaginary inputs (fixed in
SVN, but I'd rather not rely on unreleased versions of MPFR or MPC
even if relying on very recent releases); the inverse trig and
hyperbolic functions because of known slowness in special cases; and
csin / csinh because of observed slowness that I need to investigate
and report to the MPC maintainers. Slowness can be bypassed by moving
to incremental generation (only for new / changed tests) rather than
regenerating the whole of auto-libm-test-out every time, but that
needs implementing. (This patch takes the time for running
gen-auto-libm-tests from about one second to seven, on my system,
which I think is reasonable. The slow functions would make it take
several minutes at least, which seems unreasonable.)
Tested x86_64 and x86 and ulps updated accordingly.
Consolidate code to compute sin and cos from lookup tables
This patch consolidates the multiple copies of code that looks up sin
and cos of a number from the lookup table and computes the final
value, into static functions. This does not have a noticeable
performance impact since the functions are inlined by gcc.
There is further scope for consolidation in the functions but they
cause a more noticable impact on performance (>5%) due to which I have
held back on them.
Removed more redundant computations in the slow paths of the sin and
cos functions. The notable change is the passing of the most
significant bits of X to the slow functions to check if X is positive
so that just the absolute value of x can be passed and the repeated
ABS() operation is avoided.
There are multiple points in the code where the absolute value of a
number is computed multiple times or is computed even though the value
can only be positive. This change removes those redundant
computations. Tested on x86_64 to verify that there were no
regressions in the testsuite.
Joseph Myers [Thu, 19 Dec 2013 21:26:36 +0000 (21:26 +0000)]
Don't make soft-fp symbols compat symbols for powerpc-nofpu.
sysdeps/powerpc/powerpc32/libgcc-compat.S makes certain symbols that
glibc once accidentally reexported from libgcc into compat symbols.
Where the exports were purely accidental, this is the right thing to
do. However, for powerpc-nofpu the soft-fp symbols are deliberately
exported from libc, given public versions in
sysdeps/powerpc/nofpu/Versions and used by libm in preference to the
libgcc versions that do not support the software exceptions and
rounding modes. The libc versions should also be usable by user
programs, though normally libgcc gets linked in first (meaning,
effectively, that the <fenv.h> functions are broken as regards their
expected effects on user arithmetic).
A longstanding todo item is to remove the functions in question from
libgcc (when built with recent enough glibc) - that is, remove them
from static libgcc and make them compat symbols in shared libgcc - so
that this works properly (this is one of the items mentioned at
<http://gcc.gnu.org/wiki/Software_floating_point> - parts of that page
are obviously out of date, but this item still applies). Doing this
requires first that the functions are actually available from libc for
new links, not just as compat symbols.
This patch stops the symbols in question being compat symbols for
powerpc-nofpu. The nofpu Versions entries for them are removed (the
symbols never were exported at GLIBC_2.3.2, only GLIBC_2.0, because
the compat symbols took precedence).
Tested powerpc-nofpu. The symbols are no longer compat symbols and
libm.so now properly gets undefined references to them (resolved to
libc.so) instead of the libgcc copies getting linked into libm as
before.
* sysdeps/powerpc/powerpc32/libgcc-compat.S
[_SOFT_FLOAT || __NO_FPRS__] (__fixdfdi_v_glibc20): Do not define
as a macro and a compat symbol.
[_SOFT_FLOAT || __NO_FPRS__] (__fixsfdi_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__fixunsdfdi_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__fixunssfdi_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__floatdidf_v_glibc20): Likewise.
[_SOFT_FLOAT || __NO_FPRS__] (__floaddisf_v_glibc20): Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixdfdi): Do
not use .hidden.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixsfdi):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixunsdfdi):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__fixunssfdi):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__floaddidf):
Likewise.
[HAVE_DOT_HIDDEN && (_SOFT_FLOAT || __NO_FPRS__)] (__floaddisf):
Likewise.
* sysdeps/powerpc/nofpu/Versions (libc): Remove __fixdfdi,
__fixsfdi, __fixunsdfdi, __fixunssfdi, __floatdidf and __floatdisf
from GLIBC_2.3.2.
Paul Pluzhnikov [Thu, 19 Dec 2013 18:25:23 +0000 (10:25 -0800)]
Cleanup compile warnings.
2013-12-19 Paul Pluzhnikov <ppluzhnikov@google.com>
* elf/dl-misc.c (ptr_to_signal_safe_allocator_header): New function.
(__signal_safe_memalign, __signal_safe_free): Use it.
(__signal_safe_realloc): Likewise.
Joseph Myers [Thu, 19 Dec 2013 17:36:10 +0000 (17:36 +0000)]
Update texinfo.tex, config.guess, config.sub from upstream.
This patch updates various miscellaneous files we take from upstream
GNU sources (texinfo.texi, config.guess, config.sub - various others
haven't changed upstream since we last updated them) to their current
upstream versions.
Tested x86_64.
* manual/texinfo.tex: Update to version 2013-11-26.10 with
trailing whitespace removed.
* scripts/config.guess: Update to version 2013-11-29.
* scripts/config.sub: Update to version 2013-10-01.
Joseph Myers [Thu, 19 Dec 2013 14:59:22 +0000 (14:59 +0000)]
Disable libm-test test name beautification for M_* constants.
math/gen-libm-test.pl has code to beautify names of various constants,
transforming the source form in libm-test.inc into the version
appearing in test names in libm-test-ulps files.
This has become decreasingly relevant over time for the M_* constants,
first as I changed the test names so only the arguments and not the
expected results appeared in them, then as tests have moved to
auto-libm-test-* so that automatically generated hex float constants
get used instead of M_* in test inputs.
This patch removes the beautification for all M_* constants. Tested
x86_64 and x86 and ulps updated accordingly. Even the one case where
this affected the name in the ulps files will disappear once complex
function tests are moved to auto-libm-test-*.
Joseph Myers [Thu, 19 Dec 2013 13:36:10 +0000 (13:36 +0000)]
Fix x86/x86_64 expm1 inaccuracy near 0 in directed rounding modes (bug 16293).
Bug 16293 is inaccuracy of x86/x86_64 versions of expm1, near 0 in
directed rounding modes, that arises from frndint rounding the
exponent to 1 or -1 instead of 0, resulting in large cancellation
error. This inaccuracy in turn affects other functions such as sinh
that use expm1. This patch fixes the problem by setting
round-to-nearest mode temporarily around the affected calls to
frndint. I don't think this is needed for other uses of frndint, such
as in exp itself, as only for expm1 is the cancellation error
significant.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Set
round-to-nearest mode when using frndint.
* sysdeps/i386/fpu/s_expm1.S (__expm1): Likewise.
* sysdeps/i386/fpu/s_expm1f.S (__expm1f): Likewise.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1. Do not expect
sinh test to fail.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): Remove macro.
(TEST_COND_x86): Likewise.
(expm1_tonearest_test_data): New array.
(expm1_test_tonearest): New function.
(expm1_towardzero_test_data): New array.
(expm1_test_towardzero): New function.
(expm1_downward_test_data): New array.
(expm1_test_downward): New function.
(expm1_upward_test_data): New array.
(expm1_test_upward): New function.
(main): Run the new test functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Thu, 19 Dec 2013 13:32:42 +0000 (13:32 +0000)]
Add _DEFAULT_SOURCE feature test macro.
This patch adds a feature test macro _DEFAULT_SOURCE to enable the
default set of header declarations.
The intention is: if _DEFAULT_SOURCE is not used there is no change to
the set of __USE_* macros glibc defines; if it's used on its own, and
without compiler options such as -std=c99 that define __STRICT_ANSI__,
again, there is no change; if it's used together with the macros it
approximately (i.e., apart from __USE_POSIX_IMPLICITLY) implies
(-D_BSD_SOURCE -D_SVID_SOURCE -D_POSIX_C_SOURCE=200809L), again, there
is no change. Otherwise, it causes the relevant features to be
enabled, even if __STRICT_ANSI__, or another feature test macro, would
cause them to be disabled.
This macro deliberately bundles the POSIX.1-2008 (non-X/Open)
functionality with the BSD/SVID/"misc" functionality, rather than
defining a macro that gives just the latter, as many of the header
cleanups resulting from removing _BSD_SOURCE and _SVID_SOURCE support
are only possible when BSD/SVID/"misc" is always bundled with
POSIX.1-2008.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros. Mention _DEFAULT_SOURCE in comment.
[_GNU_SOURCE] (_DEFAULT_SOURCE): Undefine and redefine.
[_DEFAULT_SOURCE]: Undefine and redefine _DEFAULT_SOURCE,
_BSD_SOURCE and _SVID_SOURCE.
[!__STRICT_ANSI__ && !_ISOC99_SOURCE && !_POSIX_SOURCE &&
!_POSIX_C_SOURCE && !_XOPEN_SOURCE && !_BSD_SOURCE &&
!_SVID_SOURCE]: Likewise.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(__USE_POSIX_IMPLICITLY): Define.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(_POSIX_SOURCE): Undefine and redefine.
[_DEFAULT_SOURCE && !_POSIX_SOURCE && !_POSIX_C_SOURCE]
(_POSIX_C_SOURCE): Likewise.
* manual/creature.texi (_DEFAULT_SOURCE): Document.
(Feature Test Macros): Update documentation of default features.
Allan McRae [Thu, 19 Dec 2013 01:53:22 +0000 (11:53 +1000)]
Stop partial menu generation in INSTALL file
The commit d136c6dc resulted in menu text for the "Top" node being added
to the INSTALL file on regeneration. As the full menu is not displayed
in the plain text file anyway, suppress the menu section completely to
avoid the additional text.
Also regenerate the INSTALL file to commit a small formatting change
introduced in the same commit.
Brooks Moses [Thu, 12 Dec 2013 00:58:12 +0000 (16:58 -0800)]
Add error reporting (via errno) to getauxval().
[BZ 15846] As discussed in the recent thread on my $EXEC_ORIGIN patch
and in BZ 15846, getauxval() presently has no unambiguous way of
reporting an error condition. It currently returns zero on error, but
this may also be a valid result for some auxv entries. As there is no
clear invalid result for all current and future auxv entries, this patch
sets errno (following a suggestion in the BZ entry).
This version of the patch also adds documentation and tests for the
value-not-found conditions in getauxval().
Joseph Myers [Wed, 18 Dec 2013 17:59:29 +0000 (17:59 +0000)]
Move tests of jn and yn from libm-test.inc to auto-libm-test-in.
This patch moves tests of jn and yn to auto-libm-test-in, adding the
required support for gen-auto-libm-tests (and adding a missing
assertion there and fixing logic that was broken for functions with
integer arguments).
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of jn and yn.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (jn_test_data): Use AUTO_TESTS_if_f.
(yn_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_if_f.
(func_calc_desc): Add mpfr_if_f union field.
(FUNC_mpfr_if_f): New macro.
(test_functions): Add jn and yn.
(calc_generic_results): Assert type of second input for
mpfr_ff_f. Handle mpfr_if_f.
(output_for_one_input_case): Disable all checking for arguments
fitting floating-point types in case of an integer argument.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Wed, 18 Dec 2013 15:17:39 +0000 (15:17 +0000)]
Update powerpc-nofpu localplt.data for fegetround hidden_proto / hidden_def.
My recent changes that added libm_hidden_proto / libm_hidden_def for
fegetround had the side effect of removing the need for a
localplt.data entry for fegetround for powerpc-nofpu. This patch
removes that entry. Tested powerpc-nofpu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/nptl/localplt.data:
Don't expect fegetround reference in libm.so.
Joseph Myers [Wed, 18 Dec 2013 11:38:27 +0000 (11:38 +0000)]
Fix ldbl-128 logl for subnormals (bug 16338).
This patch fixes bug 16338, ldbl-128 logl not handling subnormals
(with consequent inaccuracy for lgammal as well). The fix is simply
to use __frexpl when determining the exponent, as done already in
log2l and log10l. Given the lack of testing of small arguments to any
of the log* functions, appropriate tests are added for all of them.
Tested x86_64 and x86 and ulps updated accordingly, and spot tests
also run for mips64 to confirm the ldbl-128 fix.
Note that while this fixes lgammal inaccuracy for small positive
arguments, I suspect that there will still be problems with spurious
underflows in that case.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Use __frexpl
to determine exponent and adjust argument to have exponent of -1.
* math/auto-libm-test-in: Add more tests of log, log10, log1p and
log2.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Paul Eggert [Wed, 18 Sep 2013 20:15:12 +0000 (13:15 -0700)]
Support TZ transition times < 00:00:00.
This is needed for version-3 tz-format files; it supports time
stamps past 2037 for America/Godthab (the only entry in the tz
database for which this change is relevant).
* manual/time.texi (TZ Variable): Document transition times
from -167:59:59 through -00:00:01.
* time/tzset.c (tz_rule): Time of day is now signed.
(__tzset_parse_tz): Parse negative time of day.
Paul Eggert [Wed, 18 Sep 2013 20:01:11 +0000 (13:01 -0700)]
Document TZ transition times >= 25:00:00.
* manual/time.texi (TZ Variable): Document transition times from
25:00:00 through 167:59:59. These are already supported, and this
support will help with version-3 tz-format files.