- It requires sync the auto-generated C file with current glibc
implementation;
- It still uses symbol redirections hacks where libc-symbols.h
provide macros that uses compiler builtins
(libc_ifunc_redirected for instance);
- It does not handle all required compiler handling
(inhibit_stack_protector on iFUNC resolver).
- No architecure uses it.
This is the only use of auto-generation syscall which uses a vDSO
plus IFUNC and the current x86 generic implementation already covers
the expected semantic.
linux: Fix vDSO macros build with time64 interfaces
As indicated on libc-help [1] the ec138c67cb commit broke 32-bit
builds when configured with --enable-kernel=5.1 or higher. The
scenario 10 from [2] might also occur in this configuration and
INLINE_VSYSCALL will try to use the vDSO symbol and
HAVE_CLOCK_GETTIME64_VSYSCALL does not set HAVE_VSYSCALL prior its
usage.
Also, there is no easy way to just enable the code to use one
vDSO symbol since the macro INLINE_VSYSCALL is redefined if
HAVE_VSYSCALL is set.
Instead of adding more pre-processor handling and making the code
even more convoluted, this patch removes the requirement of defining
HAVE_VSYSCALL before including sysdep-vdso.h to enable vDSO usage.
The INLINE_VSYSCALL is now expected to be issued inside a
HAVE_*_VSYSCALL check, since it will try to use the internal vDSO
pointers.
Both clock_getres and clock_gettime vDSO code for time64_t were
removed since there is no vDSO setup code for the symbol (an
architecture can not set HAVE_CLOCK_GETTIME64_VSYSCALL).
Checked on i686-linux-gnu (default and with --enable-kernel=5.1),
x86_64-linux-gnu, aarch64-linux-gnu, and powerpc64le-linux-gnu.
I also checked against a build to mips64-linux-gnu and
sparc64-linux-gnu.
The result of INTERNAL_SYSCALL_CANCEL should be checked with
macros INTERNAL_SYSCALL_ERROR_P and INTERNAL_SYSCALL_ERRNO instead
of comparing the result directly.
This patch adds a new macro, libm_alias_finite, to define all _finite
symbol. It sets all _finite symbol as compat symbol based on its first
version (obtained from the definition at built generated first-versions.h).
The <fn>f128_finite symbols were introduced in GLIBC 2.26 and so need
special treatment in code that is shared between long double and float128.
It is done by adding a list, similar to internal symbol redifinition,
on sysdeps/ieee754/float128/float128_private.h.
Alpha also needs some tricky changes to ensure we still emit 2 compat
symbols for sqrt(f).
Rafał Lużyński [Mon, 30 Dec 2019 10:58:18 +0000 (11:58 +0100)]
Multiple locales: Add date_fmt (bug 24054)
It is not specified what should be the content of d_t_fmt and date_fmt
but in the built-in C locale those fields have only one difference:
date_fmt contains "%Z" (the current time zone) while d_t_fmt does not.
For most of the locales this commit does the following operation:
copy d_t_fmt to date_fmt, and then remove "%Z" from d_t_fmt.
If "%Z" was originally missing from d_t_fmt add it to date_fmt.
It also corrects comments where necessary.
Exceptions:
* In bo_CN, dz_BT, and km_KH "%Z" has not been added to date_fmt because
it was too difficult. In these locales date_fmt has been set to the
copy of d_t_fmt.
* In en_DK "%Z" has not been removed from d_t_fmt in order to preserve
the conformance with the standard mentioned in the comment.
The command to identify and initially edit the locales that need the
update was:
for i in `grep -lw d_t_fmt *`
do
if ! grep -qw date_fmt $i ; then
awk '/d_t_fmt/ { print $0; gsub("d_t_fmt", "date_fmt"); } //{ print $0 }' < $i > $i.next
mv $i.next $i
fi
done
Hurd uses an empty prefix, so the linker scripts end up in /lib, the
find command picked them up, and stripping them failed because they
are not ELF files.
Florian Weimer [Thu, 2 Jan 2020 09:18:37 +0000 (10:18 +0100)]
Linux: Remove pread/pread64, pwrite/pwrite64 kludges from <sysdep.h>
Since the switch away from auto-generated wrappers for these system
calls, the kludge is already included in the C source file of the
system call wrapper.
This command uses pre-built compilers to re-install the Linux headers
from the current sources into a temporary location and runs glibc's
“make update-syscalls-lists” against that. This updates the glibc
source tree with the current system call numbers.
The new classes GlibcPolicyForCompiler and GlibcPolicyForBuild allow
customization of the Glibc.build_glibc method, replacing the existing
for_compiler flag.
Florian Weimer [Thu, 2 Jan 2020 09:18:22 +0000 (10:18 +0100)]
Linux: Use system call tables during build
Use <arch-syscall.h> instead of <asm/unistd.h> to obtain the system
call numbers. A few direct includes of <asm/unistd.h> need to be
removed (if the system call numbers are already provided indirectly
by <sysdep.h>) or replaced with <sys/syscall.h>.
Current Linux headers for alpha define the required system call names,
so most of the _NR_* hacks are no longer needed. For the 32-bit arm
architecture, eliminate the INTERNAL_SYSCALL_ARM macro, now that we
have regular system call names for cacheflush and set_tls. There are
more such cleanup opportunities for other architectures, but these
cleanups are required to avoid macro redefinition errors during the
build.
For ia64, it is desirable to use <asm/break.h> directly to obtain
the break number for system calls (which is not a system call number
itself). This requires replacing __BREAK_SYSCALL with
__IA64_BREAK_SYSCALL because the former is defined as an alias in
<asm/unistd.h>, but not in <asm/break.h>.
Florian Weimer [Thu, 2 Jan 2020 09:18:10 +0000 (10:18 +0100)]
Linux: Add tables with system call numbers
The new tables are currently only used for consistency checks
with the installed kernel headers and the architecture-independent
system call names table. They are based on Linux 5.4.
The goal is to use these architecture-specific tables to ensure
that system call wrappers are available irrespective of the version
of the installed kernel headers.
The tables are formatted in the form of C header files so that they
can be used directly in an #include directive, without external
preprocessing. (External preprocessing of a plain table file
would introduce cross-subdirectory dependency issues.) However,
the intent is that they can still be treated as tables and can be
processed by simple tools.
The irregular system call names on 32-bit arm add a complication.
The <fixup-asm-unistd.h> header is introduced to work around that,
and the system calls are listed under regular names in the
<arch-syscall.h> file.
A make target, update-syscalls-list, is added to patch the glibc
sources with data from the current kernel headers.
Joseph Myers [Wed, 1 Jan 2020 00:21:22 +0000 (00:21 +0000)]
Update copyright dates not handled by scripts/update-copyrights.
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
Rafał Lużyński [Mon, 30 Dec 2019 10:42:46 +0000 (11:42 +0100)]
lv_LV locale: Correct the time part of d_t_fmt (bug 25324)
Currently d_t_fmt formats time as "plkst. %H un %M". A quick Google
search says that "plkst." means "o’clock" and "un" means "and".
Also this format does not display seconds.
CLDR does not mention anything like that. We have no reason to use
anything different than "%H:%M:%S".
Jeremie Koenig [Sun, 29 Dec 2019 16:59:55 +0000 (17:59 +0100)]
hurd: Global signal disposition
This adds _hurd_sigstate_set_global_rcv used by libpthread to enable
POSIX-confirming behavior of signals on a per-thread basis.
This also provides a sigstate destructor _hurd_sigstate_delete, and a
global process signal state, which needs to be locked and check when
global disposition is enabled, thus the addition of _hurd_sigstate_lock
_hurd_sigstate_actions _hurd_sigstate_pending _hurd_sigstate_unlock helpers.
This also updates all the glibc code accordingly.
This also drops support for get_int(INIT_SIGMASK), which did not make sense
any more since we do not have a single signal thread any more.
During fork/spawn, this also reinitializes the child global sigstate's
lock. That cures an issue that would very rarely cause a deadlock in the
child in fork, tries to unlock ss' critical section lock at the end of
fork. This will typically (always?) be observed in /bin/sh, which is not
surprising as that is the foremost caller of fork.
To reproduce an intermediate state, add an endless loop if
_hurd_global_sigstate is locked after __proc_dostop (cast through
volatile); that is, while still being in the fork's parent process.
When that triggers (use the libtool testsuite), the signal thread has
already locked ss (which is _hurd_global_sigstate), and is stuck at
hurdsig.c:685 in post_signal, trying to lock _hurd_siglock (which the
main thread already has locked and keeps locked until after
__task_create). This is the case that ss->thread == MACH_PORT_NULL, that
is, a global signal. In the main thread, between __proc_dostop and
__task_create is the __thread_abort call on the signal thread which would
abort any current kernel operation (but leave ss locked). Later in fork,
in the parent, when _hurd_siglock is unlocked in fork, the parent's
signal thread can proceed and will unlock eventually the global sigstate.
In the client, _hurd_siglock will likewise be unlocked, but the global
sigstate never will be, as the client's signal thread has been configured
to restart execution from _hurd_msgport_receive. Thus, when the child
tries to unlock ss' critical section lock at the end of fork, it will
first lock the global sigstate, will spin trying to lock it, which can
never be successful, and we get our deadlock.
Options seem to be:
* Move the locking of _hurd_siglock earlier in post_signal -- but that
may generally impact performance, if this locking isn't generally
needed anyway?
On the other hand, would it actually make sense to wait here until we
are not any longer in a critical section (which is meant to disable
signal delivery anyway (but not for preempted signals?))?
* Clear the global sigstate in the fork's child with the rationale that
we're anyway restarting the signal thread from a clean state. This
has now been implemented.
Why has this problem not been observed before Jérémie's patches? (Or has
it? Perhaps even more rarely?) In _S_msg_sig_post, the signal is now
posted to a *global receiver thread*, whereas previously it was posted to
the *designated signal-receiving thread*. The latter one was in a
critical section in fork, so didn't try to handle the signal until after
leaving the critical section? (Not completely analyzed and verified.)
Another question is what the signal is that is being received
during/around the time __proc_dostop executes.
Jeremie Koenig [Sun, 29 Dec 2019 16:18:04 +0000 (17:18 +0100)]
hurd: Signal code refactoring
This should not change the current behavior, although this fixes a few
minor bugs which were made apparent in the process of global signal
disposition work:
- Split into more functions
- Scope variables more restrictively
- Split out inner functions
- refactor check_pending_signals
- make sigsuspend POSIX-conformant.
- fix uninitialized act value.
Not thoroughly tested, but manual testing as well as glibc tests look fine, and
manual -lpthread testing also looks fine (within the given bounds for a new
stack to be used with makecontext).
ldbl-128ibm-compat: Do not mix -mabi=*longdouble and -mlong-double-128
Some compiler versions, e.g. GCC 7, complain when -mlong-double-128 is
used together with -mabi=ibmlongdouble or -mabi=ieeelongdouble,
producing the following error message:
ldbl-128ibm-compat: Compiler flags for stdio functions
Some of the files that provide stdio.h and wchar.h functions have a
filename prefixed with 'io', such as 'iovsprintf.c'. On platforms that
imply ldbl-128ibm-compat, these files must be compiled with the flag
-mabi=ibmlongdouble. This patch adds this flag to their compilation.
Notice that this is not required for the other files that provide
similar functions, because filenames that are not prefixed with 'io'
have ldbl-128ibm-compat counterparts in the Makefile, which already adds
-mabi=ibmlongdouble to them.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Do not redirect calls to __GI_* symbols, when redirecting to *ieee128
On platforms where long double has IEEE binary128 format as a third
option (initially, only powerpc64le), many exported functions are
redirected to their __*ieee128 equivalents. This redirection is
provided by installed headers such as stdio-ldbl.h, and is supposed to
work correctly with user code.
However, during the build of glibc, similar redirections are employed,
in internal headers, such as include/stdio.h, in order to avoid extra
PLT entries. These redirections conflict with the redirections to
__*ieee128, and must be avoided during the build. This patch protects
the second redirections with a test for __LONG_DOUBLE_USES_FLOAT128, a
new macro that is defined to 1 when functions that deal with long double
typed values reuses the _Float128 implementation (this is currently only
true for powerpc64le).
Tested for powerpc64le, x86_64, and with build-many-glibcs.py.
Co-authored-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com> Reviewed-by: Florian Weimer <fweimer@redhat.com>
The functions do not fail regardless of the argument value. Also, for
Linux the return value is not correct on some platforms due the missing
usage of INTERNAL_SYSCALL_ERROR_P / INTERNAL_SYSCALL_ERRNO macros.
Checked on x86_64-linux-gnu, i686-linux-gnu, and sparc64-linux-gnu.
Avoid compat symbols for totalorder in powerpc64le IEEE long double
On powerpc64le, the libm_alias_float128_other_r_ldbl macro is
used to create an alias between totalorderf128 and __totalorderlieee128,
as well as between the totalordermagf128 and __totalordermaglieee128.
However, the totalorder* and totalordermag* functions changed their
parameter type since commit ID 42760d764649 and got compat symbols for
their old versions. With this change, the aforementioned macro would
create two conflicting aliases for __totalorderlieee128 and
__totalordermaglieee128.
This patch avoids the creation of the alias between the IEEE long double
symbols (__totalorderl*ieee128) and the compat symbols, because the IEEE
long double functions have never been exported thus don't need such
compat symbol.
Tested for powerpc64le.
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This patch adds IEEE long double versions of q*cvt* functions for
powerpc64le. Unlike all other long double to/from string conversion
functions, these do not rely on internal functions that can take
floating-point numbers with different formats and act on them
accordingly, instead, the related files are rebuilt with the
-mabi=ieeelongdouble compiler flag set.
Having -mabi=ieeelongdouble passed to the compiler causes the object
files to be marked with a .gnu_attribute that is incompatible with the
.gnu_attribute in files built with -mabi=ibmlongdouble (the default).
The difference causes error messages similar to the following:
ld: libc_pic.a(s_isinfl.os) uses IBM long double,
libc_pic.a(ieee128-qefgcvt_r.os) uses IEEE long double.
collect2: error: ld returned 1 exit status
make[2]: *** [../Makerules:649: libc_pic.os] Error 1
Although this warning is useful in other situations, the library
actually needs to have functions with different long double formats, so
.gnu_attribute generation is explicitly disabled for these files with
the use of -mno-gnu-attribute.
Tested for powerpc64le on the branch that actually enables the
sysdeps/ieee754/ldbl-128ibm-compat for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch refactors the *cvt functions implementation in a way that
makes it easier to re-use them for implementing the IEEE long double on
powerpc64le. By removing the macros that generate the function names
(APPEND combined with FUNC_PREFIX), the new code makes it easier to
define new function names, such as __qecvtieee128.
Tested that installed stripped binaries for all build-many-glibcs
targets remain identical before and after this patch. Also tested for
powerpc64le and x86_64.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This patch refactors the *cvt functions implementation in a way that
makes it easier to re-use them for implementing the IEEE long double on
powerpc64le. By splitting the implementation per se in one file
(efgcvt-template.c) and the alias definitions in others (e.g. efgcvt.c),
the new code makes it easier to define new function names, such as
__qecvtieee128.
Tested that installed stripped binaries for all build-many-glibcs
targets remain identical before and after this patch. Also tested for
powerpc64le and x86_64.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Xuelei Zhang [Thu, 19 Dec 2019 15:26:33 +0000 (15:26 +0000)]
aarch64: Optimized memset for Kunpeng processor.
Due to the branch prediction issue of Kunpeng processor, we found
memset_generic has poor performance on middle sizes setting, and so
we reconstructed the logic, expanded the loop by 4 times in set_long
to solve the problem, even when setting below 1K sizes have benefit.
Another change is that DZ_ZVA seems no work when setting zero, so we
discarded it and used set_long to set zero instead. Fewer branches and
predictions also make the zero case have slightly improvement.
Xuelei Zhang [Thu, 19 Dec 2019 13:41:40 +0000 (13:41 +0000)]
aarch64: Optimized strlen for strlen_asimd
Optimize the strlen implementation by using vector operations and
loop unrolling in main loop.Compared to __strlen_generic,it reduces
latency of cases in bench-strlen by 7%~18% when the length of src
is greater than 128 bytes, with gains throughout the benchmark.
Xuelei Zhang [Thu, 19 Dec 2019 14:53:29 +0000 (14:53 +0000)]
aarch64: Optimized implementation of memrchr
Considering the excellent performance of memchr.S on glibc 2.30, the
same algorithm is used to find chrin. Compared to memrchr.c, this
method with memrchr.S achieves an average performance improvement
of 58% based on benchtest and its extension cases.
Xuelei Zhang [Thu, 19 Dec 2019 13:49:46 +0000 (13:49 +0000)]
aarch64: Optimized implementation of strnlen
Optimize the strlen implementation by using vector operations and
loop unrooling in main loop. Compared to aarch64/strnlen.S, it
reduces latency of cases in bench-strnlen by 11%~24% when the length
of src is greater than 64 bytes, with gains throughout the benchmark.
Xuelei Zhang [Thu, 19 Dec 2019 13:08:11 +0000 (13:08 +0000)]
aarch64: Optimized implementation of strcpy
Optimize the strcpy implementation by using vector loads and operations
in main loop.Compared to aarch64/strcpy.S, it reduces latency of cases
in bench-strlen by 5%~18% when the length of src is greater than 64
bytes, with gains throughout the benchmark.
Xuelei Zhang [Thu, 19 Dec 2019 12:31:59 +0000 (12:31 +0000)]
aarch64: Optimized implementation of memcmp
The loop body is expanded from a 16-byte comparison to a 64-byte
comparison, and the usage of ldp is replaced by the Post-index
mode to the Base plus offset mode. Hence, compare can faster 18%
around > 128 bytes in all.
linux: Use waitid on wait4 if __NR_wait4 is not defined
If the wait4 syscall is not available (such as y2038 safe 32-bit
systems) waitid should be used instead. However prior Linux 5.4
waitid is not a full superset of other wait syscalls, since it
does not include support for waiting for the current process group.
It is possible to emulate wait4 by issuing an extra syscall to get
the current process group, but it is inherent racy: after the current
process group is received and before it is passed to waitid a signal
could arrive causing the current process group to change.
So waitid is used if wait4 is not defined iff the build is
enabled with a minimum kernel if 5.4+. The new assume
__ASSUME_WAITID_PID0_P_PGID is added and an error is issued if waitid
can not be implemented by either __NR_wait4 or
__NR_waitid && __ASSUME_WAITID_PID0_P_PGID.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Co-authored-by: Alistair Francis <alistair.francis@wdc.com>
The POSIX implementation is used as default and both BSD and Linux
version are removed. It simplifies the implementation for
architectures that do not provide either __NR_waitpid or
__NR_wait4.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
It enables and disables cancellation with pthread_setcancelstate
before calling the waitpid. It simplifies the waitpid implementation
for architectures that do not provide either __NR_waitpid or
__NR_wait4.
Florian Weimer [Thu, 19 Dec 2019 13:45:50 +0000 (14:45 +0100)]
Fix test isolation for elf/tst-ifunc-fault-lazy, elf/tst-ifunc-fault-bindnow
Previously, ld.so was invoked only with the elf subdirectory on the
library search path. Since the soname link for libc.so only exists in
the top-level build directory, this leaked the system libc into the
test.
Another possible fix is use a static const object. Although there
should not be a difference between a const compound literal and a static
const object, the gcc C99 status page [1] has a note stating that this
optimization is not implemented:
"const-qualified compound literals could share storage with each
other and with string literals, but currently don't.".
This patch fixes it by moving both sigset_t that represent the
signal sets to static const data object. It generates slight better
code where the object reference is used directly instead of a stack
allocation plus the content materialization.
Checked on x86_64-linux-gnu, i686-linux-gnu, and sparc64-linux-gnu.
Florian Weimer [Wed, 18 Dec 2019 09:27:10 +0000 (10:27 +0100)]
hurd: Do not make sigprocmask available in ld.so
After commit f7649d5780aa4682393b9daedd653e4d9c12784c ("dlopen: Do not
block signals"), the dynamic linker no longer uses sigprocmask, which
means that it does not have to be made available explicitly on hurd.
James Clarke [Tue, 17 Dec 2019 18:29:29 +0000 (18:29 +0000)]
hurd: Make getrandom honour GRND_NONBLOCK
* sysdeps/mach/hurd/getrandom.c (__getrandom): Open the random source
with O_NONBLOCK when the GRND_NONBLOCK flag is provided.
Message-Id: <20191217182929.90989-1-jrtc27@jrtc27.com>
mips: Do not include hi and lo in __SYSCALL_CLOBBERS for R6
GCC 10 (PR 91233) won't silently allow registers that are not architecturally
available to be present in the clobber list anymore, resulting in build failure
for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
146 | __asm__ volatile ( \
| ^~~~~~~
This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension.
This patch provides the alternative definitions of __SYSCALL_CLOBBERS for r6
targets that won't include those registers.
* sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (__SYSCALL_CLOBBERS): Exclude
hi and lo from the clobber list for __mips_isa_rev >= 6.
* sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (__SYSCALL_CLOBBERS): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (__SYSCALL_CLOBBERS): Likewise.
ldbl-128ibm-compat: Add ISO C99 versions of scanf functions
In the format string for *scanf functions, the '%as', '%aS', and '%a[]'
modifiers behave differently depending on ISO C99 compatibility. When
_GNU_SOURCE is defined and -std=c89 is passed to the compiler, these
functions behave like ascanf, and the modifiers allocate memory for the
output. Otherwise, the ISO C99 compliant version of these functions is
used, and the modifiers consume a floating-point argument. This patch
adds the IEEE binary128 variant of ISO C99 compliant functions for the
third long double format on powerpc64le.
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Use C99-compliant scanf under _GNU_SOURCE with modern compilers.
the selection of the GNU versions of scanf functions requires both
_GNU_SOURCE and -std=c89. This patch changes the tests in
ldbl-128ibm-compat so that they actually test the GNU versions (without
this change, the redirection to the ISO C99 version always happens, so
GNU versions of the new implementation (e.g. __scanfieee128) were left
untested).
Tested for powerpc64le.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Florian Weimer [Fri, 13 Dec 2019 09:23:10 +0000 (10:23 +0100)]
dlopen: Do not block signals
Blocking signals causes issues with certain anti-malware solutions
which rely on an unblocked SIGSYS signal for system calls they
intercept.
This reverts commit a2e8aa0d9ea648068d8be52dd7b15f1b6a008e23
("Block signals during the initial part of dlopen") and adds
comments related to async signal safety to active_nodelete and
its caller.
Note that this does not make lazy binding async-signal-safe with regards
to dlopen. It merely avoids introducing new async-signal-safety hazards
as part of the NODELETE changes.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Fri, 13 Dec 2019 09:18:46 +0000 (10:18 +0100)]
dlopen: Rework handling of pending NODELETE status
Commit a2e8aa0d9ea648068d8be52dd7b15f1b6a008e23 ("Block signals during
the initial part of dlopen") was deemed necessary because of
read-modify-write operations like the one in add_dependency in
elf/dl-lookup.c. In the old code, we check for any kind of NODELETE
status and bail out:
/* Redo the NODELETE check, as when dl_load_lock wasn't held
yet this could have changed. */
if (map->l_nodelete != link_map_nodelete_inactive)
goto out;
If a signal arrives during relocation and the signal handler, through
lazy binding, adds a global scope dependency on the same map, it will
set map->l_nodelete to link_map_nodelete_active. This will be
overwritten with link_map_nodelete_pending by the dlopen relocation
code.
To avoid such problems in relation to the l_nodelete member, this
commit introduces two flags for active NODELETE status (irrevocable)
and pending NODELETE status (revocable until activate_nodelete is
invoked). As a result, NODELETE processing in dlopen does not
introduce further reasons why lazy binding from signal handlers
is unsafe during dlopen, and a subsequent commit can remove signal
blocking from dlopen.
This does not address pre-existing issues (unrelated to the NODELETE
changes) which make lazy binding in a signal handler during dlopen
unsafe, such as the use of malloc in both cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It can happen that an already-loaded object that is in the local
scope is promoted to NODELETE status, via binding to a unique
symbol.
Similarly, it is possible that such NODELETE promotion occurs to
an already-loaded object from the global scope. This is why the
loop in activate_nodelete has to cover all objects in the namespace
of the new object.
In do_lookup_unique, it could happen that the NODELETE status of
an already-loaded object was overwritten with a pending NODELETE
status. As a result, if dlopen fails, this could cause a loss of
the NODELETE status of the affected object, eventually resulting
in an incorrect unload.
Stefan Liebler [Wed, 11 Dec 2019 14:09:33 +0000 (15:09 +0100)]
S390: Implement roundtoint and converttoint and define TOINT_INTRINSICS.
This patch implements roundtoint and convertoint for s390
by using the load-fp-integer and convert-to-fixed instructions.
Both functions are using "round to nearest with ties away from zero"
rounding mode and do not raise inexact exceptions.
Stefan Liebler [Wed, 11 Dec 2019 14:09:32 +0000 (15:09 +0100)]
S390: Use libc_fe* macros in fe* functions.
This patch updates the s390 specific functions fegetround,
fesetround, feholdexcept, fesetenv, feupdateenv, fegetexceptflag,
fetestexcept, fesetexceptflag, fetestexceptflag.
Now those functions are using the libc_fe* macros if possible.
Furthermore fegetexceptflag is now returning the exception from
dxc field shifted to the usual exception-flags.
Thus a special fetestexceptflag implementation is not needed anymore.
Stefan Liebler [Wed, 11 Dec 2019 14:09:31 +0000 (15:09 +0100)]
S390: Implement libc_fe* macros.
This patch provides the s390 specific implementation for
libc_feholdexcept, libc_fesetround, libc_feholdexcept_setround,
libc_fetestexcept, libc_fesetenv, libc_feupdateenv_test,
libc_feupdateenv, libc_feholdsetround_ctx, libc_feresetround_ctx,
libc_feholdsetround_noex_ctx and libc_feresetround_noex_ctx.
Stefan Liebler [Wed, 11 Dec 2019 14:09:31 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for llround functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement llround, llroundf, llroundl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:30 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for lround functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement lround, lroundf, lroundl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:29 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for llrint functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement llrint, llrintf, llrintl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:29 +0000 (15:09 +0100)]
S390: Use convert-to-fixed instruction for lrint functions.
If compiled with z196 zarch support, the convert-to-fixed instruction
is used to implement lrint, lrintf, lrintl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:28 +0000 (15:09 +0100)]
S390: Use load-fp-integer instruction for roundeven functions.
If compiled with z196 zarch support, the load-fp-integer instruction
is used to implement roundeven, roundevenf, roundevenl.
Otherwise the common-code implementation is used.
Stefan Liebler [Wed, 11 Dec 2019 14:09:24 +0000 (15:09 +0100)]
Use GCC builtins for copysign functions if desired.
This patch is always using the corresponding GCC builtin for copysignf, copysign,
and is using the builtin for copysignl, copysignf128 if the USE_FUNCTION_BUILTIN
macros are defined to one in math-use-builtins.h.
Altough the long double version is enabled by default we still need
the macro and the alternative implementation as the _Float128 version
of the builtin is not available with all supported GCC versions.
Stefan Liebler [Wed, 11 Dec 2019 14:09:24 +0000 (15:09 +0100)]
Use GCC builtins for round functions if desired.
This patch is using the corresponding GCC builtin for roundf, round,
roundl and roundf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:22 +0000 (15:09 +0100)]
Use GCC builtins for trunc functions if desired.
This patch is using the corresponding GCC builtin for truncf, trunc,
truncl and truncf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:21 +0000 (15:09 +0100)]
Use GCC builtins for ceil functions if desired.
This patch is using the corresponding GCC builtin for ceilf, ceil,
ceill and ceilf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:20 +0000 (15:09 +0100)]
Use GCC builtins for floor functions if desired.
This patch is using the corresponding GCC builtin for floorf, floor,
floorl and floorf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:20 +0000 (15:09 +0100)]
Use GCC builtins for rint functions if desired.
This patch is using the corresponding GCC builtin for rintf, rint,
rintl and rintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:18 +0000 (15:09 +0100)]
Use GCC builtins for nearbyint functions if desired.
This patch is using the corresponding GCC builtin for nearbyintf, nearbyint,
nearbintl and nearbyintf128 if the USE_FUNCTION_BUILTIN macros are defined to one
in math-use-builtins.h.
This is the case for s390 if build with at least --march=z196 --mzarch.
Otherwise the generic implementation is used. The code of the generic
implementation is not changed.
Stefan Liebler [Wed, 11 Dec 2019 14:09:17 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_trunc.c.
This patch replaces s_trunc.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Also adjusted the include path in x86_64 and sparc64 files.
Stefan Liebler [Wed, 11 Dec 2019 14:09:16 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_ceil.c.
This patch replaces s_ceil.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Also adjusted the include path in x86_64 and sparc64 files.
Stefan Liebler [Wed, 11 Dec 2019 14:09:15 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_floor.c.
This patch replaces s_floor.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Also adjusted the include path in x86_64 and sparc64 files.
Stefan Liebler [Wed, 11 Dec 2019 14:09:14 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_rint.c.
This patch replaces s_rint.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
Stefan Liebler [Wed, 11 Dec 2019 14:09:14 +0000 (15:09 +0100)]
Always use wordsize-64 version of s_nearbyint.c.
This patch replaces s_nearbyint.c in sysdeps/dbl-64 with the one in
sysdeps/dbl-64/wordsize-64 and removes the latter one.
The code is not changed except changes in code style.
git://sourceware.org / glibc.git / log