David Teigland [Thu, 23 Mar 2017 08:06:07 +0000 (03:06 -0500)]
commands: fix commands with run with path basename
The recent command definitions commit took the command
name from argv[0] without applying basename to the value,
so a pathname, e.g. /usr/sbin, would cause lvm to not
recognize the command name.
The libdevmapper interface compares existing table line retrieved from
the kernel to new table line created to decide if it can suppress a reload.
Any difference between input and output of the table line is taken to be a
change thus causing a table reload.
The dm-raid target started to misorder the raid parameters (e.g. 'raid10_copies')
starting with dm-raid target version 1.9.0 up to (excluding) 1.11.0. This causes
runtime failures (limited to raid10 as of tests) and needs to be reversed to allow
e.g. old lvm2 uspace to run properly.
Check for the aforementioned version range in libdm and adjust creation of the table line
to the respective (mis)ordered sequence inside and correct order outside the range
(as described for the raid target in the kernels Documentation/device-mapper/dm-raid.txt).
Revert "raid: adjust to misordered raid table line output"
This reverts commit 1e4462dbfbd2bbe3590936df24b3ccd83110b158
in favour of an enhanced solution avoiding changes in liblvm
completetly by checking the target versions in libdm and emitting
the respective parameter lines.
David Teigland [Tue, 21 Mar 2017 02:48:22 +0000 (21:48 -0500)]
commands: fix combined thin pool and vol create defs
Fixes command defs related to creating a new thin pool and
then a new thin lv in the new pool.
1. lvcreate --size --virtualsize --thinpool
Needs a cmd def, it was missing.
The def is unique by the three required
options: size, virtualsize and thinpool.
2. lvcreate --size --virtualsize --thinpool VG
Needs a cmd def, it was missing.
The def is unique by the three required
options: size, virtualsize and thinpool,
and one required positional arg: VG.
3. lvcreate --thin --virtualsize --size LV_new|VG
This existing def should not accept an optional
--type thin, which if used makes it indistinct
from another def.
4. lvcreate --size --virtualsize VG
This existing def should not accept an optional
--type thin or --thin, which if used makes it
indistinct from other defs (e.g. 3)
The libdevmapper interface compares existing table line retrieved from
the kernel to new table line created to decide if it can suppress a reload.
Any difference between input and output of the table line is taken to be a
change thus causing a table reload.
The dm-raid target started to misorder the raid parameters (e.g. 'raid10_copies')
starting with dm-raid target version 1.9.0 up to (excluding) 1.11.0. This causes
runtime failures (limited to raid10 as of tests) and needs to be reversed to allow
e.g. old lvm2 uspace to run properly.
Check for the aforementioned version range and adjust creation of the table line
to the respective (mis)ordered sequence inside and correct order outside the range
(as described for the raid target in the kernels Documentation/device-mapper/dm-raid.txt).
Tony Asleson [Wed, 15 Mar 2017 18:08:19 +0000 (13:08 -0500)]
lvmdbusd: Limit state refreshes for udev events
Udev events can come in like a flood when something changes. It really
doesn't do us any good to refresh the state of the service numerous times
when 1 would suffice. We had something like this before, but it was
removed when we added the refresh thread. However, we have since learned
that we need to sequence events in the correct order and block dbus
operations if we believe the state has been affected, thus udev events are
being processed on the main work queue. This change limits spurious
work items from getting to the queue.
Tony Asleson [Wed, 15 Mar 2017 15:57:01 +0000 (10:57 -0500)]
lvmdbusd: Only disable notify_dbus after getting external event
If we always disable the sending of notify dbus events then in the case
where all the users are lvm dbus users we will be in udev handling mode
until at least 1 external lvm command occurs. Instead we will not disable
notify dbus until after we get at least 1 external event. This makes the
service get into the correct mode of operation faster.
Zdenek Kabelac [Fri, 17 Mar 2017 13:01:18 +0000 (14:01 +0100)]
properties: only thin-pool provides discards
Quering non-thin-pool segment for discard property may lead
to intenal error if the segment had set 'out-of-range' value,
so only thin-pool is allowed, for other it returns NULL.
raid: conditionally reject convert to striped/raid0*
If SubLVs to be removed still exist after an image removing
conversion (i.e. "lvconvert --yes --force --stripes N "
with N < total stripes) any request to convert to a different
striped/raid* level has to be rejected until after those freed
SubLVs got removed by running the aforementioned lvconvert again.
Add tests to check conversion to striped/raid* gets rejected.
Enhance a test comment.
Adjust to final target version 1.10.1 supporting reshape
properly and to recently changed report field specifications
(e.g. rehape_len_le) to allow these tests to run.
Lower mirror region size to suite the tiny test VG.
David Teigland [Thu, 16 Mar 2017 15:56:05 +0000 (10:56 -0500)]
lvconvert: disable lvmetad for repair
Repairing missing devices does not work reliably
with lvmetad, so disable lvmetad before repair.
A standard lvmetad refresh (pvscan --cache) will
enable lvmetad again.
dmeventd: reintroduce fix mirror DSO to work with lvmetad
Commit 07ded8059cbd assumed that the mirror is blocked which is not the case.
It is accessible, degraded and in need of repair because some of its legs
(partially) failed. Any auto-repair via dmeventd fails though because
of lvmetad not providing proper data about the failed PV(s). That's why
this workaround got introduced in commit 76f6951c3e8f until we get to
the lvmetad interaction core issue.
Mind any mirror auto-repair failure is caused by such lvmetad interaction
problems not yet solved so disabling lvmetad works as a resort as elaborated
on in the related bz.
For each section 8 man page, a .8_gen file is created from one of:
.8_main - Old-style man page - content used directly
.8_des and .8_end - Description and end section of a generated page
.8_pregen - Pre-generated page used if the generator fails
Other man sections are not generated and use the suffix .5_main or .7_main.
Developers should use 'make generate' to regenerate the .8_pregen files.
David Teigland [Mon, 13 Mar 2017 17:54:56 +0000 (12:54 -0500)]
commands: fix command matching for unused options
When a given command:
- matches command definition A based on required options,
but uses optional options that are not accepted by A.
- matches command definition B based on required options,
(but fewer required items than A), and uses no
unaccepted optional options.
then B is the correct choice. Command A would fail because
of the unaccepted optional options. The logic was mistakenly
letting A win because it had a greater number of required option
matches, without accounting for the optional option mismatches.
David Teigland [Fri, 10 Mar 2017 21:57:26 +0000 (15:57 -0600)]
commands: fix lvcreate mirrors/stripes options
Systematically outline every combination of:
--type striped, --type mirror, --type raid, --mirrors, --stripes
and make sure each is assigned to one specific cmd def.
This revealed that a new command def is needed for
lvcreate that uses both --mirrors and --stripes
but no --type option.
The use of LVCREATE_RAID shortcut for an option set
resulted in mirrors/stripes being included in optional
opts set when they were already in the required list.
Sending %d as format argument in lvmetad_vg_remove_pending() will cause
segfaults in config_make_nodes_v() when va_arg() casts to int64_t. Also, it is
clearly advertised in the lvm source code that using plain %d is prohibited, so
let's switch to FMTd64.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Bryn M. Reeves [Mon, 13 Mar 2017 11:09:11 +0000 (11:09 +0000)]
dmfilemapd: return error for wrong number of args
The initial check on argc incorrectly returns 1 when the wrong
number of arguments are present, causing a segfault in main()
when no arguments are given:
# dmfilemapd
Wrong number of arguments.
usage: dmfilemapd <fd> <group_id> <path> <mode> [<foreground>[<log_level>]]
Segmentation fault (core dumped)
Commit f4b30b0daef3 was about displaying visible LV size
when reshape space is allocated. Take parity devices
into account when displaying the user visible LV size.
David Teigland [Fri, 10 Mar 2017 21:22:13 +0000 (15:22 -0600)]
commands: use correct relative signs with mirror option
As was recently done with relative signes for sizes/extents,
limit the signs used with the mirrors option, e.g.
lvcreate --mirrors now does not accept or advertise an
optional minus sign with the value. lvconvert --mirrors
accepts +|-.