Jon Turney [Tue, 13 Dec 2022 23:17:48 +0000 (23:17 +0000)]
Cygwin: configure: Add option to disable building 'dumper'
Rather than guessing, based on just the presence of libbfd, add an
explicit configuration option, to build dumper or not, defaulting to
building it.
This might have some use when bootstrapping Cygwin for a new
architecture, or when building your own Cygwin-targetted cross-compiler,
rather than installing one from the copr, along with the dependencies of
libbfd.
Takashi Yano [Sat, 19 Aug 2023 05:10:16 +0000 (14:10 +0900)]
Cygwin: pty: Fix failure to clear switch_to_nat_pipe flag.
After the commit fbfea31dd9b9, switch_to_nat_pipe is not cleared
properly when non-cygwin app is terminated in the case where the
pseudo console is disabled. This is because get_winpid_to_hand_over()
sometimes returns PID of cygwin process even though it should return
only PID of non-cygwin process. This patch fixes the issue by adding
a new argument which requests only PID of non-cygwin process to
get_console_process_id().
Fixes: fbfea31dd9b9 ("Cygwin: pty: Avoid cutting the branch the pty master is sitting on.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Takashi Yano [Tue, 15 Aug 2023 23:00:27 +0000 (08:00 +0900)]
Cygwin: shared: Fix access permissions setting in open_shared().
After the commit 62f11a5a5704, the access permissions argument passed
to open_shared() is ignored and always replaced with (FILE_MAP_READ |
FILE_MAP_WRITE). This causes the weird behaviour that sshd service
process loses its cygwin PID. This triggers the failure in pty that
transfer_input() does not work properly.
This patch resumes the access permission settings to fix that.
Takashi Yano [Mon, 14 Aug 2023 10:48:12 +0000 (19:48 +0900)]
Cygwin: pty: Add missing pinfo check in transfer_input().
The commit 10d083c745dd has a bug that lacks a check for pinfo pointer
value for master_pid. This causes segmentation fault if the process
whose pid is master_pid no longer exists. This patch fixes the issue.
Fixes: 10d083c745dd ("Cygwin: pty: Inherit typeahead data between two input pipes.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Takashi Yano [Fri, 4 Aug 2023 08:45:34 +0000 (17:45 +0900)]
Cygwin: pty: Fix thread safety of readahead buffer handling in pty master.
Previously, though readahead buffer handling in pty master was not
fully thread-safe, accept_input() was called from peek_pipe() thread
in select.cc. This caused the problem reported in:
https://cygwin.com/pipermail/cygwin/2023-July/253984.html
The mechanism of the problem is:
1) accept_input() which is called from peek_pipe() thread calls
eat_readahead(-1) before reading readahead buffer. This allows
writing to the readahead buffer from another (main) thread.
2) The main thread calls fhandler_pty_master::write() just after
eat_readahead(-1) was called and before reading the readahead
buffer by accept_input() called from peek_pipe() thread. This
overwrites the readahead buffer.
3) The read result from readahead buffer which was overwritten is
sent to the slave.
This patch makes readahead buffer handling fully thread-safe using
input_mutex to resolve this issue.
Fixes: 7b03b0d8cee0 ("select.cc (peek_pipe): Call flush_to_slave whenever we're checking for a pty master.") Reported-by: Thomas Wolff <towo@towo.net> Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
After the commit a4705d387f78, printf() for floating-point values
causes a memory leak. The legacy _ldtoa_r() assumed the char pointer
returned will be free'ed by Bfree(). However, gdtoa-based _ldtoa_r()
returns the pointer returned by gdtoa() which should be free'ed by
freedtoa(). Due to this issue, the caller of _ldtoa_r() fails to free
the allocated char buffer. This is the cause of the said memory leak.
https://cygwin.com/pipermail/cygwin/2023-July/254054.html
This patch makes rv_alloc()/freedtoa() allocate/free the buffer in
a compatible way with legacy _ldtoa_r().
Rename _NL_CTYPE_OUTDIGITSx_MB/WC to _NL_CTYPE_OUTDIGITx_MB/WC
The extended _NL_foo names were originally designed after their GLibc
counterparts. However, the OUTDIGIT macros were accidentally defined as
OUTDIGITS, plural. Fix them.
Fixes: d47d5b850bed ("Extend locale support to maintain wide char values of native strings")
Conflicts: Context formatting changes in winsup/utils/locale.cc not
backported to 3.4 branch Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The GLIBC extension AT_EMPTY_PATH allows the functions fchownat
and fstatat to operate on dirfd alone, if the given pathname is an
empty string. This also allows to operate on any file type, not
only directories.
Commit fa84aa4dd2fb4 broke this. It only allows dirfd to be a
directory in calls to these two functions.
Fix that by handling AT_EMPTY_PATH right in gen_full_path_at.
A valid dirfd and an empty pathname is now a valid combination
and, noticably, this returns a valid path in path_ret. That
in turn allows to remove the additional path generation code
from the callers.
Fixes: fa84aa4dd2fb ("Cygwin: fix errno values set by readlinkat") Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Convert gen_full_path_at to take flag values from the caller, rather
than just a bool indicating that empty paths are allowed. This is in
preparation of a better AT_EMPTY_PATH handling in a followup patch.
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Cygwin needs an internal flag to allow specifying an empty pathname
in utimesat (GLIBC extension). We define it in _default_fcntl.h to
make sure we never introduce a value collision accidentally.
While at it, define the values as 16 bit hex values.
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The check if the local variable p is NULL is useless. The preceeding
code always sets p to a valid pointer, or it crashes if path_ret is
invalid (which would be a bug in Cygwin).
Mark Geisert [Sun, 9 Jul 2023 07:59:22 +0000 (00:59 -0700)]
Cygwin: Make gcc-specific code in <sys/cpuset.h> compiler-agnostic
The current version of <sys/cpuset.h> cannot be compiled by Clang due to
the use of builtin versions of malloc, free, and memset. Their presence
here was a dubious optimization anyway, so their usage has been
converted to standard library functions.
The use of __builtin_popcountl remains because Clang implements it just
like gcc does. If/when some other compiler (Rust? Go?) runs into this
issue we can deal with specialized handling then.
The "#include <sys/cdefs>" here to define __inline can be removed since
both of the new includes sub-include it.
Addresses: https://cygwin.com/pipermail/cygwin/2023-July/253927.html Fixes: 9cc910dd33a5 (Cygwin: Make <sys/cpuset.h> safe for c89 compilations) Signed-off-by: Mark Geisert <mark@maxrnd.com>
Mark Geisert [Tue, 4 Jul 2023 00:51:41 +0000 (17:51 -0700)]
Cygwin: Make <sys/cpuset.h> safe for c89 compilations
Four modifications to include/sys/cpuset.h:
* Change C++-style comments to C-style also supported by C++
* Change "inline" to "__inline" on code lines
* Add "#include <sys/cdefs.h>" to make sure __inline is defined
* Don't declare loop variables on for-loop init clauses
Tested by first reproducing the reported issue with home-grown test
programs by compiling with gcc option "-std=c89", then compiling again
using the modified <sys/cpuset.h>. Other "-std=" options tested too.
Addresses: https://cygwin.com/pipermail/cygwin-patches/2023q3/012308.html Fixes: 315e5fbd99ec ("Cygwin: Fix type mismatch on sys/cpuset.h") Signed-off-by: Mark Geisert <mark@maxrnd.com>
Takashi Yano [Thu, 22 Jun 2023 15:07:26 +0000 (00:07 +0900)]
Cygwin: thread: Reset _my_tls.tid if it's pthread_null in init_mainthread().
Currently, _my_tls.tid is set to pthread_null if pthread::self()
is called before pthread::init_mainthread(). As a result, pthread::
init_mainthread() does not set _my_tls.tid appropriately. Due to
this, pthread_join() fails in LDAP environment if the program is
the first program which loads cygwin1.dll.
Takashi Yano [Fri, 2 Jun 2023 01:19:18 +0000 (10:19 +0900)]
Cygwin: pty: Additional fix for transferring input at exit.
The commit 3456e8b7db5b does not fix transferring input at exit
appropriately. If the more than one non-cygwin apps are executed
simultaneously and one of them is terminated, the pty master failed
to send input to the other non-cygwin apps. This patch fixes that.
Takashi Yano [Thu, 1 Jun 2023 10:44:41 +0000 (19:44 +0900)]
Cygwin: pty: Fix transferring type-ahead input between input pipes.
After the commit 595fcb21ffc0, transferring type-ahead input between
the pipe for cygwin app and the pipe for non-cygwin app will not be
done appropriately when the stdin of the non-cygwin app is not pty.
Due to this issue, sometimes the keyboard input might be lost which
should be sent to cygwin app. This patch fixes the issue.
Fixes: 595fcb21ffc0 ("Cygwin: pty: Fix reading CONIN$ when stdin is not a pty.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Cygwin: Adjust CWD magic to accommodate for the latest Windows previews
Reportedly Windows 11 build 25*** from Insider changed the current
working directory logic a bit, and Cygwin's "magic" (or:
"technologically sufficiently advanced") code needs to be adjusted
accordingly.
This fixes https://github.com/git-for-windows/git/issues/4429
In contrast to rename default behaviour, Linux' renameat2 returns -1
with errno set to EEXIST, if oldfile and newfile refer to the same
file, and the RENAME_NOREPLACE flag is set.
Follow suit, given this is a Linux-only function anyway.
readlinkat(fd, "", ...) is supposed to return ENOENT per POSIX,
but Cygwin returns EBADF.
At the same time, we have to maintain the special feature of
glibc that readlinkat(fd, "", ...) operates on fd, if fd is pointing
at a symlink opened with O_PATH|O_NOFOLLOW.
And, while fixing that, readlinkat(fd, path, ...) *still* has to set errno
to EBADF, if fd is an invalid descriptor *and* path is a relative path.
This required to change the evaluation order in the helper function
gen_full_path_at.
Last but not least, in case of the aforementioned glibc-like special
handling for symlink descriptors, we have to make sure that errors from
gen_full_path_at are not spilled into that special handling.
Fixes: 6cc05784e16a ("Cygwin: readlinkat: allow pathname to be empty") Reported-by: Bruno Haible <bruno@clisp.org> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When cygheap_max was > CYGHEAP_STORAGE_INITIAL, commit_size would be set to
allocsize(cygheap_max), which is an address, not a size. VirtualAlloc would be
called to commit commit_size bytes, which would fail, and then child_copy would
be called with zero as the base address.
Fixes: 2f9b8ff00cce ("Cygwin: decouple cygheap from Cygwin DLL") Signed-off-by: David McFarland <corngood@gmail.com>
Cygwin: pty: Fix reading CONIN$ when stdin is not a pty.
Previously, the pty master sends inputs to the pipe for cygwin app
even when pseudo console is activated if stdin is not the pty.
This causes the problem that key input is not sent to non cygwin
app even if the app opens CONIN$. This patch sets switch_to_nat_pipe
to true regardless whether stdin is the pty or not to allow that case.
Corinna Vinschen [Wed, 29 Mar 2023 08:18:23 +0000 (10:18 +0200)]
Cygwin: dirname: fix handling of leading slashes
Per https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/xbd_chap04.html:
"A pathname that begins with two successive slashes may be interpreted
in an implementation-defined manner, although more than two leading
slashes shall be treated as a single slash."
So more than 2 leading slashes are supposed to be folded into one,
which our dirname neglected. Fix that.
Make kill -V and kill -l exit immediately, thus stopping to
print "not enough arguments" accidentally.
Fixes: ef48a2cad3704 ("* kill.cc (prog_name) New global variable.") Fixes: c49fa762631f9 ("* Makefile.in (kill.exe): Add as a specific target.") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Take the opportunity to follow FreeBSD's and Linux's lead in recasting
macro inline code as calls to static inline functions. This allows the
macros to be type-safe. In addition, added a lower bound check to the
functions that use a cpu number to avoid a potential buffer underrun on
a bad argument. h/t to Corinna for the advice on recasting.
Previously, SNDCTL_DSP_POST and SNDCTL_DSP_SYNC were implemented
wrongly. Due to this issue, module-oss of pulseaudio generates
choppy sound when SNDCTL_DSP_POST is called. This patch fixes that.
Cygwin: get_posix_access: Make mode_t parameter mandatory
Avoid the mistake fixed in the preceeding commit by passing
the mode_t argument by reference. This also affects a couple
other functions calling get_posix_access in turn.
Cygwin: chmod: don't drop default ACEs from directory ACLs
commit bc444e5aa4ca introduced a call to get_posix_access()
with a NULL pointer for the mode_t parameter because the value
is not needed later on... entirely ignoring the fact that the
mode_t bits are checked for the object being a directory.
In turn, the get_posix_access() call never checked for default
ACEs and returned only the standard ACEs. Thus, every chmod call
on a directory dropped the default ACEs from its permissions, as
well as the default NULL deny-ACE used to store specific bits.
It got also impossible to set the sgid bit on directories.
Cygwin: mkdir: use correct default permissions filtered by umask
Older coreutils created directories with mode bits filtered through
umask. Newer coreutils creates directories with full permissions,
0777 by default.
This new coreutils behaviour uncovered the fact that default ACEs for
newly created directories were not filtered by umask starting with
commit bc444e5aa4ca.
setlocale: create LC_ALL string when changing locale
This patch is for the sake of gnulib.
gnulib implements some form of a thread-safe setlocale variant
called setlocale_null_r, which is supposed to return the locale
strings in a thread-safe manner. This only succeeds if the system's
setlocale already handles this thread-safe, otherwise gnulib adds
some locking on its own.
Newlib's setlocale always writes the global string array holding the
LC_ALL value anew on each invocation of setlocale(LC_ALL, NULL).
Since that doesn't allow to call setlocale(LC_ALL, NULL) in a
thread-safe manner, so locking in gnulib is required.
And here's the problem...
The lock is decorated as dllexport when building for Cygwin. This
collides with the default behaviour of ld to export all symbols.
If it finds one decorated symbol, it will only export this symbol
to the DLL import lib.
Change setlocale so that it writes the global string array
holding the LC_ALL value at the time the locale gets changed.
On setlocale(LC_ALL, NULL), just return the pointer to the
global LC_ALL string array, just as in GLibc. The burden of
doing so is negligibly for all targets, but adds thread-safety
for gnulib's setlocal_null_r() function, and gnulib can drop
the lock entirely when building for Cygwin.
Takashi Yano [Wed, 25 Jan 2023 09:30:50 +0000 (18:30 +0900)]
Cygwin: dsp: Fix hang on close() if another thread calls write().
fhandler_dev_dsp (OSS) has a problem that waitforallsent(), which is
called from close(), falls into infinite loop if another thread calls
write() accidentally after close(). This patch fixes the issue.
Corinna Vinschen [Mon, 23 Jan 2023 13:01:43 +0000 (14:01 +0100)]
Cygwin: mount: differ allowed server name chars from allowed share name chars
The list of invalid chars for server names differs from the
list of invalid chars for share names. Apart from that,
we don't allow control chars in both kinds of names.
Fixes: 6338d2f24a60 ("Cygwin: mount: allow any valid character in UNC paths") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Sun, 22 Jan 2023 19:11:59 +0000 (20:11 +0100)]
Cygwin: mount: allow any valid character in UNC paths
The current code only allows server and share names to
start with ASCII chars [a-zA-Z0-9],, which is not correct.
Rather, check for a valid share character.
Takashi Yano [Sat, 21 Jan 2023 12:33:03 +0000 (21:33 +0900)]
Cygwin: fsync: Fix EINVAL for block device.
The commit af8a7c13b516 has a problem that fsync returns EINVAL for
block device. This patch treats block devices as a special case.
https://cygwin.com/pipermail/cygwin/2023-January/252916.html
Fixes: af8a7c13b516 ("Cygwin: fsync: Return EINVAL for special files.") Reported-by: Yano Ray <yanorei@hotmail.co.jp> Reviewed-by: Corinna Vinschen <corinna@vinschen.de> Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Corinna Vinschen [Wed, 18 Jan 2023 18:59:48 +0000 (19:59 +0100)]
Cygwin: open_shared: always bump next_address
The new loop in open_shared has a subtil performance problem.
Next_address is bumped only if mapping at this address
failed. Every subsequent call to open_shared has a high probability
having to call MapViewOfFileEx twice, because next_address is still
set to the address of the last successful mapping.
Avoid this by bumping next_address every time.
While at it, fix a comment.
Conflict: Missing backport of 31302b267b86 ("Cygwin: drop fixed addresses for standard shared regions") Fixes: dc0fe7742b8c ("Cygwin: open_shared: try harder allocating a shared region") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Tue, 17 Jan 2023 16:43:21 +0000 (17:43 +0100)]
Cygwin: disable high-entropy VA for cygcheck and strace
It's not a good idea to enable high-entropy VA for tools loading the
Cygwin DLL dynamically. The addresses used by HEVA tend to collide with
fixed address areas managed by Cygwin.
Fixes: 60675f1a7eb2 ("Cygwin: decouple shared mem regions from Cygwin DLL") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Tue, 17 Jan 2023 09:18:51 +0000 (10:18 +0100)]
Cygwin: open_shared: try harder allocating a shared region
For fixed regions (cygwin/user/myself/shared console), try fixed
address first. Fallback to non-fixed region. Don't even try fixed
address if the Cygwin DLL gets dynamically loaded.
For non-fixed regions, try to allocate in a loop within the area
from SHARED_REGIONS_ADDRESS_LOW to SHARED_REGIONS_ADDRESS_HIGH.
Fixes: 60675f1a7eb2 ("Cygwin: decouple shared mem regions from Cygwin DLL") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Mon, 16 Jan 2023 21:25:42 +0000 (22:25 +0100)]
Cygwin: open_shared: don't reuse shared_locations parameter as output
For ages, open_shared uses the shared_locations parameter as
output to indicate if the mapping for a shared region has been
created or just opened. Split this into two parameters. Use
the shared_locations parameter as input only, return the creation
state of the mapping in a bool reference parameter.
Conflict: Simple collision due to missing backport of 3721a756b0d8 ("Cygwin: console: Make the console accessible from other terminals.") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Mon, 16 Jan 2023 13:23:38 +0000 (14:23 +0100)]
Cygwin: /proc/cpuinfo: Always print topology info
vmstat from proc-ps-4.0.x prints "Unable to create system stat structure"
if the /proc/cpuinfo output fails to contain topology info. While
Linux always prints topology info if the kernel has been built with
CONFIG_SMP, Cygwin only prints topology info if the CPU is known to
be multi-core (i. e., the HT feature flag is set).
Fix that by printing topology info all the time, even for single-core
CPUs.
Takashi Yano [Tue, 10 Jan 2023 12:04:29 +0000 (21:04 +0900)]
Cygwin: cygheap: Initialize myself_pinfo before child_copy().
After the commit 30add3e6b3e3, the problem:
https://cygwin.com/pipermail/cygwin/2022-December/252759.html
occurs rarely. It seems that myself_pinfo should be initialized
where the timing before child_copy() and after cygheap allocation.
This patch moves the initialization there.
Corinna Vinschen [Tue, 10 Jan 2023 10:45:28 +0000 (11:45 +0100)]
Cygwin: /proc/<PID>/status: avoid crash computing signal info
The code computing the mask of pending signals used the per-queued
signal TLS pointer without checking it for NULL. Fix this by using
the process-wide signal mask in that case.
Fixes: 195169186bfd5 ("Cygwin: wait_sig: allow to compute process-wide mask of pending signals") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Takashi Yano [Wed, 21 Dec 2022 01:06:10 +0000 (10:06 +0900)]
Cygwin: devices: Make generic console devices invisible from pty.
The devices /dev/conin,conout,console were wrongly visible from ptys,
though they are inaccessible. This is because fhandler_console::exists()
returns true due to existing invisible console. This patch makes these
devices invisible from ptys.
If the less is started from non-cygwin shell and window size is
changed, it will hang-up when quitting. The cause of the proglem is
that less uses longjump() in signal handler. If the signal handler
is called while cygwin is acquiring the mutex, cygwin loses the
chance to release mutex. With this patch, the mutex is released
just before calling kill_pgrp() and re-acquired when kill_pgrp()
returns.
Corinna Vinschen [Wed, 21 Dec 2022 12:08:39 +0000 (13:08 +0100)]
Cygwin: path_conv: make sure sym.path_flags is always initialized
Commit c1023ee353705 introduced a split between mount flags and
path flags. It didn't initialize symlink_info::path_flags in
path_conv::check, because that's done in symlink_info::check.
However, there are two code paths expecting symlink_info::path_flags
being already initialized and both skip symlink_info::check.
Make sure symlink_info::path_flags is initalized to 0 early in
path_conv::check.
Fixes: c1023ee353705 ("Cygwin: path_conv: decouple path_types from mount types") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Mon, 12 Dec 2022 20:56:14 +0000 (21:56 +0100)]
Cygwin: path handling: never substitute virtual drive with target path
Move the drive substitution code after the call to
GetFinalPathNameByHandleW into a local function revert_virtual_drive
and add code to handle non-remote virtual drives, i. e., those
created with the subst command. (Try to) make sure that virtual
drives are never treated like symlinks.
Corinna Vinschen [Tue, 13 Dec 2022 12:28:16 +0000 (13:28 +0100)]
Cygwin: Makefile: build new-cygwin1.dll in a single step
The complicated build routine was only required because we needed
the .cygheap section at the end of the file, and the debug sections
broke this. Now that the cygheap is out of the way, we really don't
have to do this anymore, and the build can just generate a DLL with
integrated debug info.
Corinna Vinschen [Tue, 13 Dec 2022 12:25:06 +0000 (13:25 +0100)]
Cygwin: Makefile: only regenerate cygwin_version.c if it changes
Make sure to create a new cygwin_version.c if it either doesn't
exist yet, or if it would be different from the former file.
This avoids unnecessary DLL rebuilding.
Fixes: 97eb64b909bc ("Cygwin: uname: generate default release string from git as well") Fixes: 4949a82cde98 ("Cygwin: uname: fix building in non-git source dir") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit 97eb64b909bc broke building outside of a git dir, because
the git describe command would fail. Fix this by checking if
we're in a git tree at all and just generate an empty string
as version string. Use this in uname_x to generate a fallback
version.
Fixes: 97eb64b909bc ("Cygwin: uname: generate default release
string from git as well" Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Cygwin: uname: generate default release string from git as well
When building a release with cygport, we get uname version info
from cygport, which in turn gets version info from `git describe'.
During development, the release info for local builds was not
that helpful yet. Fix that, by creating version info from
`git describe' if CYGPORT_RELEASE_INFO isn't given. Make sure to
always force rebuild of the version info to pick up source file
changes as well as git actions.
Rearrange code slightly to generate machine info first, release info
after that. Use snprintf to generate release string safely.
After the commit 9e4d308cd592, the performance of read from non-cygwin
pipe has been degraded. This is because select_sem mechanism does not
work for non-cygwin pipe. This patch fixes the issue.
Cygwin: define FILE as struct __sFILE64, not as __sFILE
Until Cygwin 3.3.6, we define __LARGE64_FILES unconditionally, so we
were using the type __sFILE64 even for 64 bit. That was lazy and wrong.
so commit 2902b3a09e0a ("Cygwin: drop requirement to build newlib's
stdio64") tried to fix that.
Unfortunately this patch forgot to take the exposure of the typename
__sFILE64 in userspace into account. This leads to trouble in C++ due
to name mangling.
Commit 0f376ae22036 tried to fix this by just renaming __sFILE to
__sFILE64 by using a macro. While __sFILE and __sFILE64 are the same
size, they are not exactly congruent.
To avoid backward compatibility problems, make sure to define FILE
as the real __sFILE64, and make sure that __sFILE is not defined at
all on Cygwin.
Fixes: 0f376ae22036 ("Cygwin: rename __sFILE to __sFILE64 for backward
compatibility") Fixes: 2902b3a09e0a ("Cygwin: drop requirement to build newlib's stdio64") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Cygwin: 3.4-only: uname: drop dot from external release info
Right now, the dot between the version and the machine info in
the release field is expected to come in from CYGPORT_RELEASE_INFO.
But that's just confusing and doesn't match what we now do in 3.5
since commit 97eb64b909bc ("Cygwin: uname: generate default release
string from git as well")
Commit 188d5f6c9ad5 erroneously moved the mcountFunc.S file to the
TARGET_FILES target, rather than keeping it in GMON_FILES. The
result is that the __fentry__ entry point is now entirely undefined,
so `gcc -pg' is broken.
Create new target-specific GMON_TARGET_FILES and move mcountFunc.S
into it. Add $(GMON_TARGET_FILES) to GMON_FILES.
Cygwin's default locale is "C.UTF-8" as far as LC_CTYPE settings
are concerned. However, while __global_locale contains fixed
mbtowc and wctomb pointers, the lc_ctype_T pointer is still pointing
to _C_ctype_locale, representing the standard "C" locale.
The problem with this is that the codeset name as well as MB_CUR_MAX
is wrong.
Fix this by introducing a new lc_ctype_T structure called
_C_utf8_ctype_locale, setting the default codeset to "UTF-8" and
MB_CUR_MAX to 6. Use this as lc_ctype_T pointer in __global_locale
by default on Cygwin.
fetch_account_from_windows shortcuts the current user in that
it takes the user's domain SID and just adds the matching RID
from the token's primary group to create a group SID.
How wrong this is can be very simply reproduced:
Assuming you run a native process, like cmd, with primary group
set to the Administrators builtin group. Run Cygwin's id(1) as
child process. id(1) will print a non-existent group as primary
group and also add it to the group list.
This can only be avoided by not special casing the current user
and thus not creating a group SID from partial information.
Fixes: 6cc7c925ce86 ("(pwdgrp::fetch_account_from_windows): Default primary group for the
current user to primary group from user token.") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
internal_getlogin overwrites the process token primary group if it
differs from the primary group as stored in the passwd DB.
However, this also overwrites the primary group of the process if
it has been deliberately changed by a former process (e. g., newgrp),
and the current process has a non-Cygwin process as parent.
Our docs claim we restrict overwriting the primary group to local,
non-domain user accounts anyway, and it was actually meant this way.
So check for exactly that before overwriting the primary group
in the token: It's only allowed if the user is a local account
and the primary group in the token is still the default group
"None".
Fixes: 6cc7c925ce861 ("(internal_getlogin): Give primary group
from user token more weight.") Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Cygwin: uinfo: Drop long disabled nss_prefix and nss_separator
Originally the code was written to allow three ways of prefixing
accounts and to freely define a domain/account separator. This code
has been disabled even before being officially released, and it was
never re-enabled. Given there has been no complaints for eight years
now, drop this code eventually. Just add a macro to define the
domain/account separator statically.
Cygwin: exec: don't access cygheap before it's initialized
This is a long-standing thinko.
When you exec a process, dll_crt0_0 in the child process calls
child_info_spawn::handle_spawn(). handle_spawn() initialises the
cygheap.
Now consider calling strace. Strace is a non-Cygwin process dynamically
loading cygwin1.dll via LoadLibrary. This in turn initializes the DLL:
- dll_crt0_0 finds that the process it attaches to has been exec'd, so
child_info_spawn::handle_spawn() is called.
- If the DLL is being dynamically loaded, handle_spawn() calls
child_info_spawn::get_parent_handle(). This in turn tries to set
the moreinfo->myself_pinfo value inside the cygheap to NULL.
- However, at this time, the cygheap has not yet been initialized. This
only occurs in the cygheap_fixup_in_child() call after get_parent_handle()
returns.
--> SEGV
This thinko never had a negative side effect, because the cygheap was
pre-allocated at DLL load time until commit 2f9b8ff00cce ("Cygwin:
decouple cygheap from Cygwin DLL"). With 2f9b8ff00cce, the cygheap
actually doesn't exist until after the call to cygheap_fixup_in_child().
Fix this problem by moving the assignment after the call to
cygheap_fixup_in_child().
Cygwin: multiple_cygwin_problem: drop obsolete check for "cygheap"
After decoupling cygheap from the DLL loading address, the check
for a different _cygheap_start has gone. So the matching string
check in multiple_cygwin_problem is obsolete now.
Carlo Bramini [Tue, 29 Nov 2022 09:02:43 +0000 (10:02 +0100)]
Cygwin: serial: Fix a copy-paste error in DTR setup
In commit 2dab880c963ce0204c3513d664f610b587a3e6a6 I did a mistake when
I copied the new fhandler_serial::switch_modem_lines() from my modified
3.3.6 branch to the current master and I left a copy paste error. This
patch fixes that error.
Fixes: 2dab880c963c ("Cygwin: fix TIOCMBIS/TIOCMBIC not working when using usbser.sys")