Takashi Yano [Sat, 31 Aug 2024 19:31:03 +0000 (04:31 +0900)]
Cygwin: pipe: Fix a regression that raw_write() slows down
After the commit 7f3c22532577, writing to pipe extremely slows down.
This is because cygwait(select_sem, 10, cw_cancel) is called even
when write operation is already completed. With this patch, the
cygwait() is called only if the write operation is not completed.
Takashi Yano [Sat, 31 Aug 2024 09:32:00 +0000 (18:32 +0900)]
Cygwin: console: Disable cons_master_thread in win32-input-mode
When win32-input-mode (which is supported by Windows Termainal) is
set by "\033[?9001h", cons_master_thread does not work properly and
consumes larger and larger memory space. This is because sending
event by WriteConsoleInput() is translated into the sequence that
is used by win32-input-mode. Due to this behaviour, write-back
of the INPUT_RECORDs does not work as expected. With this patch,
cons_master_thread is disabled on win32-input-mode where the signal
keys such as Ctrl-C, Ctrl-Z etc. never comes.
Corinna Vinschen [Thu, 22 Aug 2024 19:21:51 +0000 (21:21 +0200)]
locales: Fix definition of lc_messages_T::codeset
nl_langinfo_l accesses lc_messages_T::codeset as soon as
__HAVE_LOCALE_INFO__ is defined, but codeset only exists
if __HAVE_LOCALE_INFO_EXTENDED__ is defined.
Fix this by defining lc_messages_T::codeset depending on
__HAVE_LOCALE_INFO__.
Fixes: ac7f1d5e931c ("Get rid of LCID, reformat type definitions in setlocale.h") Reported-by: Inglis <Brian.Inglis@SystematicSW.ab.ca> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen [Thu, 22 Aug 2024 19:15:44 +0000 (21:15 +0200)]
nl_langinfo_l: drop erroneus messages::codeset entry
The nl_ext array contains offsets into the extended info of
locale structures, the index being equivalent to the nl_item
values in langinfo.h.
For the lc_messages_T struct, nl_ext erroneusly contains an
entry for the codeset member, which is in fact not part of the
extended info in nl_item. However, due to that, the offsets for
subsequent entries are off by one.
Fix this by dropping the messages::codeset entry from nl_ext.
Fixes: d47d5b850bed ("Extend locale support to maintain wide char values of native strings") Reported-by: Brian Inglis <Brian.Inglis@systematicsw.ab.ca> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Yuriy Kolerov [Wed, 21 Aug 2024 13:32:03 +0000 (16:32 +0300)]
arc64: Add port for Synopsys DesignWare ARCv3 ISA
Synopsys ARCv3 ISA includes 32-bit ARC HS5x targets and
64-bit ARC HS6x targets. Both CPU families are placed
in "arc64" subdirectories as it done for GCC port.
Target name arc64 is used for historical reasons and
Synopsys ARCv3 baremetal toolchains contain multilib
configurations both for 32-bit and 64-bit families.
arc32 target name is reserved for 32-bit ARC HS5x
targets in case of non-multilib 32-bit builds.
Note that libgloss libraries for ARCv3 are compatible with
libgloss for ARCv1/2. Thus, Makefile.inc for libgloss uses
sources from libgloss/arc directory except crtX.S files.
Co-authored-by: Shahab Vahedi <list@vahedi.org> Co-authored-by: Claudiu Zissulescu <claziss@gmail.com> Co-authored-by: Bruno Mauricio <brunoasmauricio@gmail.com> Co-authored-by: Luis Silva <luis.m.silva99@hotmail.com> Signed-off-by: Yuriy Kolerov <ykolerov@synopsys.com>
Yuriy Kolerov [Tue, 20 Aug 2024 12:10:43 +0000 (15:10 +0300)]
arc: libgloss: Prepare for porting to ARCv3
There are 3 families of Synopsys DeisgnWare ARC processors:
ARCompact/ARCv1 (32-bit), ARCv2 (32-bit) and ARCv3 (32-bit
and 64-bit targets). Upstream Newlib supports only ARCv1/2.
This commit prepares ARCv1/2 libgloss port to be reused by
ARCv3 port (except crt* files). Note that __ARC64__ macro
stands for all ARCv3 targets.
Alexey Brodkin [Tue, 20 Aug 2024 12:10:40 +0000 (15:10 +0300)]
arc: Remove @ from symbol references in assembly
There's no semantic change, it's only to make the same code
compilable with MetaWare toolchian, which actually assumes
@x as a full name, not omitting @.
Corinna Vinschen [Sun, 18 Aug 2024 20:07:16 +0000 (22:07 +0200)]
Cygwin: pipe: improve writing when pipe buffer is almost full
So far fhandler_pipe_fifo::raw_write always returns -1/EINTR
if a signal arrived. Linux does not do that if there's still
space left in the pipe buffer.
The Linux buffer handling can't be emulated by Cygwin, but we
can do something similar which makes it much more likely to still
write successfully even if the buffer is almost full.
Utilize pipe_data_available to return valid pipe buffer usage
to raw_write, allowing a more sophisticated way to fill the
buffer while maintaining comaptibility with non-Cygwin pipes.
Corinna Vinschen [Sun, 18 Aug 2024 19:55:52 +0000 (21:55 +0200)]
Cygwin: select: set pipe writable only if PIPE_BUF bytes left
Linux select(2) returns the pipe as writable if at least one
free page (4K onl most systems) is left in a page-oriented buffer
handling. This is the same as PIPE_BUF.
Emulate this behaviour by only returning the pipe as writable
if at least 4K space is left in the buffer.
Jon Turney [Sun, 4 Aug 2024 16:15:50 +0000 (17:15 +0100)]
Cygwin: Avoid use-after-free warnings in __set_lc_time_from_win() etc.
Rewrite to avoid new use-after-free warnings about realloc(), seen with
gcc 12, e.g.:
> In function ‘void rebase_locale_buf(const void*, const void*, const char*, const char*, const char*)’,
> inlined from ‘int __set_lc_time_from_win(const char*, const lc_time_T*, lc_time_T*, char**, wctomb_p, const char*)’ at ../../../../src/winsup/cygwin/nlsfuncs.cc:705:25:
> ../../../../src/winsup/cygwin/nlsfuncs.cc:338:24: error: pointer ‘new_lc_time_buf’ may be used after ‘void* realloc(void*, size_t)’ [-Werror=use-after-free]
> 338 | *ptrs += newbase - oldbase;
> | ~~~~~~~~^~~~~~~~~
> ../../../../src/winsup/cygwin/nlsfuncs.cc: In function ‘int __set_lc_time_from_win(const char*, const lc_time_T*, lc_time_T*, char**, wctomb_p, const char*)’:
> ../../../../src/winsup/cygwin/nlsfuncs.cc:699:44: note: call to ‘void* realloc(void*, size_t)’ here
> 699 | char *tmp = (char *) realloc (new_lc_time_buf, len);
Technically, it's UB to later refer to the realloced pointer (even just
for offset computations, without deferencing it), so switch to using
malloc() to create the resized copy.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Jon Turney [Sun, 4 Aug 2024 16:02:00 +0000 (17:02 +0100)]
Cygwin: Fix warnings about narrowing conversions of socket ioctls
Fix gcc 12 warnings about narrowing conversions of socket ioctl constants
when used as case labels, e.g:
> ../../../../src/winsup/cygwin/net.cc: In function ‘int get_ifconf(ifconf*, int)’:
> ../../../../src/winsup/cygwin/net.cc:1940:18: error: narrowing conversion of ‘2152756069’ from ‘long int’ to ‘int’ [-Wnarrowing]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The _IOR anbd _IOW macros cast the sizeof of their third arg
uselessly to long. The _IO definitions have been taken from BSD
in 1995 and never changed again. The fact that the sizeof() gets
cast to long is probably a remnant from the past when the stuff
was supposed to be used on 16 bit machines, but the value was
supposed to be 32 bit.
Given that the values are not supposed to be ever bigger than 32 bit,
we drop the (long) cast. Compare with current FreeBSD, which does
not cast at all.
Jon Turney [Sun, 4 Aug 2024 16:01:38 +0000 (17:01 +0100)]
Cygwin: Fix warning about narrowing conversions in tape options
Fix a gcc 12 warning about a narrowing conversion in case labels for
tape options.
> In file included from /wip/cygwin/src/winsup/cygwin/include/sys/mtio.h:14,
> from ../../../../src/winsup/cygwin/fhandler/tape.cc:13:
> ../../../../src/winsup/cygwin/fhandler/tape.cc: In member function ‘int mtinfo_drive::set_options(HANDLE, int32_t)’:
> ../../../../src/winsup/cygwin/fhandler/tape.cc:965:12: error: narrowing conversion of ‘4026531840’ from ‘unsigned int’ to ‘int’ [-Wnarrowing]
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Jon Turney [Sun, 4 Aug 2024 15:30:16 +0000 (16:30 +0100)]
Cygwin: Fix warnings about narrowing conversions of NTSTATUS constants
Fix warnings with gcc 12 about narrowing conversions of NTSTATUS
constants when used as case labels, e.g:
> ../../../../src/winsup/cygwin/exceptions.cc: In static member function ‘static int exception::handle(EXCEPTION_RECORD*, void*, CONTEXT*, PDISPATCHER_CONTEXT)’:
> ../../../../src/winsup/cygwin/exceptions.cc:670:10: error: narrowing conversion of ‘-1073741682’ from ‘NTSTATUS’ {aka ‘int’} to ‘unsigned int’ [-Wnarrowing]
Jon Turney [Sun, 4 Aug 2024 14:51:07 +0000 (15:51 +0100)]
Cygwin: Suppress array-bounds warning from NtCurrentTeb()
This disables a warning seen with gcc 12 caused by intrinsics used by
the inline implementation of NtCurrentTeb() inside w32api headers.
> In function ‘long long unsigned int __readgsqword(unsigned int)’,
> inlined from ‘_TEB* NtCurrentTeb()’ at /usr/include/w32api/winnt.h:10020:86,
> [...]
> /usr/include/w32api/psdk_inc/intrin-impl.h:838:1: error: array subscript 0 is outside array bounds of ‘long long unsigned int [0]’ [-Werror=array-bounds]
See also: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105523#c6
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
https://gcc.gnu.org/pipermail/gcc-patches/2023-September/631525.html
brings c_atomic and cxx_atomic definitions into GCC.
This patch makes atomics type detection correct for GCC.
Brian Inglis [Thu, 18 Jul 2024 16:27:50 +0000 (10:27 -0600)]
Cygwin: fhandler/proc.cc(format_proc_cpuinfo): Linux 6.10 flags resync
Linux 6.10 changed the content of cpufeatures.h to require explicit
quoted flag names for output in comments, instead of requiring a null
quoted string "" at the start of comments to suppress flag name output.
As a result, some flags (not all for output) were renamed and others moved:
- change dts to ds; move intel_ppin down; swap ibpd and ibrs;
- change some flag names and descriptions that are not output.
Signed-off-by: Brian Inglis <Brian.Inglis@SystematicSW.ab.ca>
Linux cpuinfo follows output for each processor with a blank line,
so we output newlines to get a blank line:
- newline after power management feature flags if printed;
- newline to give blank line after each processor output.
Reported-by: Achim Gratz https://cygwin.com/pipermail/cygwin/2024-July/256223.html Signed-off-by: Brian Inglis <Brian.Inglis@SystematicSW.ab.ca>
Kito Cheng [Wed, 10 Jul 2024 09:44:59 +0000 (17:44 +0800)]
newlib: Add more FreeBSD files for non LDBL_EQ_DBL support
For RISC-V, AArch64, i386, and x86_64
- k_tanl.c is required for tanl; the linker will report `__kernel_tanl`
not found when tanl is called.
- s_cospil.c and s_sinpil.c are added for cospil and sinpil, which are already
available for ld80 but not for ld128.
Joel Sherrill [Tue, 18 Jun 2024 15:50:22 +0000 (10:50 -0500)]
sys/tree.h: Removed
This file was from a specific older FreeBSD version. There have been
multiple changes to this file with FreeBSD 14 including breaking
changes to the file. Including this file as part of newlib results
in not always having the correct version of sys/tree.h for any
specific software. RTEMS will manage its use of this file outside
of newlib.
Clément Chigot [Mon, 10 Jun 2024 12:37:57 +0000 (14:37 +0200)]
libc/arm: add missing .cfi_sections
The modifications added by the series "M-profile PACBTI-enablement"
(see 9d6b00511e50a54d2472d11f75f7c0f2b4a98b24) have introduced a couple
of .cfi_* instructions.
Like for e6459123e497409a9e3d845c39829a9602ba55a4, these instructions
create object files which contain .eh_frame sections. However, ARM uses
its own unwind info format, not .eh_frame, which is generated by
ARM-specific directives, not .cfi_*. The .eh_frame sections are useless,
but also not removed by strip and may be harmful with some linker
scripts.
Adding ".cfi_sections .debug_frame" (as in glibc) moves the generated
directives towards .debug_frame instead of .eh_frame. Making them easier
to handle.
Use of stdatomic.h is undefined in C++, even the C++ 2020 standard does not
list stdatomic.h as a C library header supported by the language. More,
there are some subtle differences between the <atomic> C++ header, and
C11+ stdatomic.h provided features.
Nonetheless, it is a quality of the implementation aspect, so let mis-users
mis-use stdatomic.h as they want, by making a compat shim for _Bool.
Pedro F. Giffuni [Mon, 27 Nov 2017 15:01:59 +0000 (15:01 +0000)]
sys/sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Cygwin: console: Fix for GNU screen/tmux in ConEmu
If the master process of GNU screen or tmux is started in ConEmu
and ConEmu is closed, reattaching to the GNU screen/tmux in another
console will not work correctly. This is because the ConEmu master
process was already closed even though some console APIs are hooked
by ConEmuHk64.dll to communicate with ConEmu master process. With
this patch, to make them unhooked, DllMain() of ConEmuHk64.dll is
called with DLL_PROCESS_DETACH.
Fixes: 3721a756b0d8 ("Cygwin: console: Make the console accessible from other terminals.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Cygwin: console: Fix race issue on allocating console simultaneously.
Previously, if two or more processes request to allocate a console at
the same time, the same device number could be accidentally allocated.
This patch fixes the issue by creating a named mutex (input_mutex) and
checking if GetLastError() is ERROR_ALREADY_EXIST or not to ensure
the unit number will be allocated in an atomic way. Thanks to this,
EnumWindow() is not necessary anymore to scan console units.
This also makes minor device numbers unique and console devices visible
across sessions. This disallows duplicated device number for different
sessions, so the MAX_CONS_DEV has been increased from 64 to 128.
Additionally, the console allocation and scanning will be faster as
a side effect of eliminating EnumWindows().
Fixes: 3721a756b0d8 ("Cygwin: console: Make the console accessible from other terminals.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Cygwin: console: Bug fix for the last console code change
The commit baf2764dca43 has a serious bug that shared_info_state is
common for all console devices despite it should be individual for
each console device. This patch fixes that.
Fixes: baf2764dca43 ("Cygwin: console: Fixes an issue that tmux can not run on the console.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Cygwin: console: Fixes an issue that tmux can not run on the console.
After the commit c77a5689f7bd, tmux can not run on the console.
This patch replaces the countermeasure for the race issue between
console setup and close with another mechanism using a mutex.
Fixes: c77a5689f7bd ("Cygwin: console: Do not unmap shared console memory belonging to ctty.") Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Cygwin: console: Fix conflict on shared names between sessions.
Previously, shared names in the console were created using get_minor().
However, get_minor() was not unique to the console across sessions.
This is because EnumWindows(), which is used to look for console windows,
cannot enumerate windows across sessions. This causes conflict on the
shared names between sessions (e.g. sessions of different users,
different services, a service and a user session, etc.).
With this patch, GetConsoleWindow() is used instead of get_minor().
GetConsoleWindow() has been used for the name of shared memory, which
should be unique to each console.
Addresses: https://cygwin.com/pipermail/cygwin/2024-April/255893.html Fixes: ff4440fcf768 ("Cygwin: console: Introduce new thread which handles input signal."); Reported-by: Johannes Khoshnazar-Thoma <johannes@johannesthoma.com> Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Cygwin: pty: Avoid client deadlock when pty master stops to read.
Previsouly, the following commands hangs:
mintty -e timeout 1 dash -c 'yes aaaaaaaaaaaaaaaaaaaaaaaaa | cat'
The mechanism is as follows.
When the child process (timeout) is terminated, mintty seems to stop
reading pty master even if yes or cat still alive.
If the the pipe used to transfer output from pty slave to pty master
is full due to lack of master reader, WriteFile() to the pipe is
blocked. WriteFile() cannot be canceled by cygwin signal, therefore,
pty slave hangs.
This patch avoids hanging by checking pipe space before calling
WriteFile() and prevents writing data more than space.
Takashi Yano [Fri, 28 Jun 2024 04:42:03 +0000 (13:42 +0900)]
Cygwin: dsp: Fix incorrect openflags when opening multiple /dev/dsp
Previously, the following steps failed with error:
1) Open /dev/dsp with O_RDONLY
2) Open /dev/dsp with O_WRONLY
3) Issue SNDCTL_DSP_GETOSPACE ioctl() for 2)
This is because IS_WRITE() returns false for 2) due to incorrect
openflags handling in archetype instance. This patch fixes the
issue by adding open_setup() to fhandler_dev_dsp to set openflags
correctly for each instance.
Pietro Monteiro [Mon, 24 Jun 2024 23:08:38 +0000 (19:08 -0400)]
libc: sh: add missing prototypes and change functions from K&R to ANSI
The SuperH target doesn't build on GCC 14.1 because of missing
function prototypes or because some function declarations use the
deprecated K&R style. This patch adds missing prototypes on the files
the functions are used and convert K&R declarations to ANSI-style.
Signed-off-by: Pietro Monteiro <pietro@sociotechnical.xyz>
Christophe Lyon [Wed, 19 Jun 2024 15:48:30 +0000 (15:48 +0000)]
arm: emit .type %function directive in FUNC_START macro
The linker needs to know whether a symbol is STT_FUNCTION when
deciding which farcall stub to emit (if needed), this patch adds this
to the FUNC_START macro which is used in crt0.
Jon Turney [Fri, 7 Jun 2024 16:29:10 +0000 (17:29 +0100)]
Cygwin: suppress a warning generated with w32api >= 12.0.0
w32api 12.0.0 adds the returns_twice attribute to RtlCaptureContext().
There's some data-flow interaction with using it inside a while loop
which causes a maybe-uninitialized warning.
../../../../winsup/cygwin/exceptions.cc: In member function 'int _cygtls::call_signal_handler()':
../../../../winsup/cygwin/exceptions.cc:1720:33: error: '<anonymous>' may be used uninitialized in this function [-Werror=maybe-uninitialized]
If ldd is run against a DLL which links to the Cygwin DLL, ldh will end
up loading the Cygwin DLL dynamically, much like cygcheck or strace.
Addresses: https://cygwin.com/pipermail/cygwin/2024-May/255991.html Fixes: 60675f1a7eb2 ("Cygwin: decouple shared mem regions from Cygwin DLL") Reviewed-by: Ken Brown <kbrown@cornell.edu>, Takashi Yano <takashi.yano@nifty.ne.jp> Signed-off-by: Jeremy Drake <cygwin@jdrake.com>
Takashi Yano [Wed, 29 May 2024 10:12:09 +0000 (19:12 +0900)]
Cygwin: pthread: Fix a race issue introduced by the commit 2c5433e5da82
To avoid race issues, pthread::once() uses pthread_mutex. This caused
the handle leak which was fixed by the commit 2c5433e5da82. However,
this fix introduced another race issue, i.e., the mutex may be used
after it is destroyed. This patch fixes the issue. Special thanks to
Bruno Haible for discussing how to fix this.
Addresses: https://cygwin.com/pipermail/cygwin/2024-May/255987.html Reported-by: Bruno Haible <bruno@clisp.org> Fixes: 2c5433e5da82 ("Cygwin: pthread: Fix handle leak in pthread_once.") Reviewed-by: Ken Brown <kbrown@cornell.edu> Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Yuriy Kolerov [Tue, 21 May 2024 09:56:57 +0000 (10:56 +0100)]
arc: libgloss: Add support of EM Starter Kit board
These specs files are introduced for EMSK board:
* emsk1_em4.specs - EMSKv1 with EM4 core, everything in
ICCM/DCCM memory
* emsk1_em6.specs - EMSKv1 with EM6 core, everything in
ICCM/DCCM memory
* emsk1_em6_ram.specs - EMSKv1 with EM6 core, startup code
in ICCM and everything else in RAM
* emsk2.1_em5d.specs - EMSKv2.1 with EM5D core, everything
in ICCM/DCCM memory
* emsk2.1_em7d.specs - EMSKv2.1 with EM7D core, everything
in ICCM/DCCM memory
* emsk2.1_em7d_ram.specs - EMSKv2.1 with EM7D core, startup
code in ICCM and everything else in RAM
* emsk2.2_em7d.specs - EMSKv2.2+ with EM7D core, everything
in ICCM/DCCM memory
* emsk2.2_em7d_ram.specs - EMSKv2.2+ with EM7D core, startup
code in ICCM and everything else in RAM
* emsk2.2_em9d.specs - EMSKv2.2+ with EM9D core, everything
in ICCM/DCCM memory
* emsk2.2_em9d_ram.specs - EMSKv2.2+ with EM9D core, startup
code in ICCM and everything else in RAM
* emsk2.2_em11d.specs - EMSKv2.2+ with EM11D core, everything
in ICCM/DCCM memory
* emsk2.2_em11d_ram.specs - EMSKv2.2+ with EM11D core, startup
code in ICCM and everything else in RAM
An example of building an application:
$ arc-elf32-gcc -mcpu=em -specs=emsk2.2_em11d_ram.specs main.c -o main
Signed-off-by: Vladimir Isaev <vvisaev@gmail.com> Signed-off-by: Yuriy Kolerov <kolerov93@gmail.com>
Yuriy Kolerov [Tue, 21 May 2024 09:56:56 +0000 (10:56 +0100)]
arc: libgloss: Add support of EM SDP board
These specs files are introduced for EM SDP board:
* emsdp1.1.specs - EM SDP 1.1, everything in ICCM/DCCM memory
* emsdp1.1_ram.specs - EM SDP 1.1, startup code in ICCM
memory and everything else in RAM
* emsdp1.2.specs - EM SDP 1.2, everything in ICCM/DCCM memory
* emsdp1.2_ram.specs - EM SDP 1.2, startup code in ICCM
memory and everything else in RAM
An example of building an application:
$ arc-elf32-gcc -mcpu=em -specs=emsdp1.1_ram.specs main.c -o main
Signed-off-by: Vladimir Isaev <vvisaev@gmail.com> Signed-off-by: Yuriy Kolerov <kolerov93@gmail.com>
Vladimir Isaev [Tue, 21 May 2024 09:56:49 +0000 (10:56 +0100)]
arc: libgloss: Introduce hostlink interface
There is a special interface built in ARC simulators (such as
nSIM) called MetaWare hostlink IO which can be used to implement
system calls. This commit adds support for this interface to the
ARC port of libgloss.
Here is an example of using this interface:
$ arc-elf32-gcc -mcpu=hs -specs=hl.specs main.c -o main
$ nsimdrv -tcf $NSIM_HOME/etc/tcf/templates/hs48_full.tcf main
Hello, World!
Yuriy Kolerov [Tue, 21 May 2024 09:56:46 +0000 (10:56 +0100)]
arc: libc, libgloss: Remove .file directive from .S files
Assembler for ARCv2 always extends the name provided by
.file directive to an absolute form.
On ARCv3 targets .file directive forces assembler to put
a provided string to DW_AT_name field as is without
extending to an absolute path. Then GDB cannot find
source files because of it.
The best way to fix this issue is just delete lines
with .file directive in .S files and let the compiler
to decide what DW_AT_name must contain. Particularly,
the compiler fills this filed by an absolute path to
a .S file because only absolute paths are used in
toolchain's build process.
ARC supports a restricted register file with 16 registers.
However, optimized routines support only a full register
file. Thus, fallback on default implementation in case
of 16-entry register file.
arc: libgloss: Use long calls attribute for exit_halt
According to GCC documentation for ARC, a function marked with
the long_call attribute is always called using register-indirect
jump-and-link instructions, thereby enabling the called function
to be placed anywhere within the 32-bit address space.
exit_halt function is provided by crt0.S and it's used
in nsim-syscalls.c. Thus, we want to ensure that a linkage
issue will not arise.
Dimitar Dimitrov [Tue, 21 May 2024 17:02:02 +0000 (20:02 +0300)]
pru: Do not define MISSING_SYSCALL_NAMES for pru
- The PRU newlib port is supposed to implement case #2 as described in
newlib/libc/include/reent.h . Thus drop the defining of
MISSING_SYSCALL_NAMES.
- libgloss/configure: Regenerate.
- libgloss/libnosys/acinclude.m4: Do not define
MISSING_SYSCALL_NAMES for pru.
Neal Frager [Mon, 13 May 2024 06:24:19 +0000 (07:24 +0100)]
libgloss: microblaze: fix read and _write declarations
This patch resolves the following build error which occurs with gcc 14.1.0:
../../.././libgloss/microblaze/linux-outbyte.c: In function 'outbyte':
../../.././libgloss/microblaze/linux-outbyte.c:3:9: error: implicit declaration of function '_write' [-Wimplicit-function-declaration]
3 | _write(1, &c, 1);
The envp paramter is currently NULL when crt0.S calls main.
With this patch the envp parameter should now be set correctly.
Tested with riscv32 and riscv64: both gdb/sim and qemu do work.
While commit 0321fb573654 ("Cygwin: glob: convert wchar_t to wint_t")
switched the entire glob mechanism from wchar_t to wint_t, the globify
function calling glob on a DOS command line did not catch up and only
checked for the next character constituting a 16 bit wchar_t. This
broke reading surrogate pairs from incoming DOS command lines if the
string had to go through glob(3).
Check for an entire 32 bit unicode char instead.
Fixes: 0321fb573654 ("Cygwin: glob: convert wchar_t to wint_t") Reported-by: David Allsopp <david@tarides.com> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Cygwin: fhandler_virtual::exists: always set fileid
Commit a0a25849f9dd ("Cygwin: fhandler_virtual: move fileid to path_conv
member") broke `ls -l /proc/<PID>'. Turns out, the commit forgot to set
the fileid in case of a virtual root dir (i. e., returning virt_rootdir)
in fhandlers utilizing fileid. This crashed opendir() due to a random
fileid.
In file included from [...]/newlib/libc/include/stdio.h:60,
from [...]:
[...]/newlib/libc/include/sys/reent.h:911:1: error: expected declaration before '}' token
Cygwin: fhandler_virtual: move fileid to path_conv member
Commit 80f722e97cf7 ("Cygwin: opendir(3): move ENOTDIR check into main
function") introduced a bug in fhandler_virtual handling. While the
assertion that path_conv::check() already calls exists() and sets
FILE_ATTRIBUTE_DIRECTORY accordingly, the exists() function is called
on a fhandler_virtual object created for just this code snippet. The
side effect of this is that the fileid member in the calling
fhandler_virtual object is not set after path_conv::check().
Move the fhandler_virtual::fileid member to path_conv::_virt_fileid
and create matching path_conv::virt_fileid() and fhandler_virtual::fileid()
methods.
Let path_conv::check() propagate the fileid set in the local
fhandler_virtual::exists() call to its own _virt_fileid.
Use new fhandler_virtual::fileid() method throughout.
Fixes: 80f722e97cf7 ("Cygwin: opendir(3): move ENOTDIR check into main function") Reported-by: Bruce Jerrick <bmj001@gmail.com> Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Andrew Stubbs [Fri, 22 Mar 2024 14:53:30 +0000 (14:53 +0000)]
amdgcn: Implement proper locks
This should prevent printf output from multiple threads getting garbled.
I don't know why IO ever worked properly -- probably it was always a bit
broken -- but the GFX11 devices have a different cache architecture and
trying to print from many threads at once corrupted the FILE buffers.
git://sourceware.org / newlib-cygwin.git / log