Carlos O'Donell [Thu, 8 Oct 2015 02:21:36 +0000 (22:21 -0400)]
malloc: Consistently apply trim_threshold to all heaps (Bug 17195)
In the per-thread arenas we apply trim_threshold-based checks
to the extra space between the pad and the top_area. This isn't
quite accurate and instead we should be harmonizing with the way
in which trim_treshold is applied everywhere else like sysrtim
and _int_free. The trimming check should be based on the size of
the top chunk and only the size of the top chunk. The following
patch harmonizes the trimming and make it consistent for the main
arena and thread arenas.
In the old code a large padding request might have meant that
trimming was not triggered. Now trimming is considered first based
on the chunk, then the pad is subtracted, and the remainder trimmed.
This is how all the other trimmings operate. I didn't measure the
performance difference of this change because it corrects what I
consider to be a behavioural anomaly. We'll need some profile driven
optimization to make this code better, and even there Ondrej and
others have better ideas on how to speedup malloc.
Tested on x86_64 with no regressions. Already reviewed by Siddhesh
Poyarekar and Mel Gorman here and discussed here:
https://sourceware.org/ml/libc-alpha/2015-05/msg00002.html
Joseph Myers [Wed, 7 Oct 2015 23:45:29 +0000 (23:45 +0000)]
Fix lround, llround missing exceptions close to overflow threshold (bug 19088).
The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions). (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.)
This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT).
Tested for x86_64, x86 and mips64.
[BZ #19088]
* sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and
<limits.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h>
and <limits.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and
<limits.h>.
(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and
<limits.h>.
(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and
<limits.h>.
(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and
<limits.h>.
(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* math/libm-test.inc (lround_test_data): Add more tests.
(llround_test_data): Likewise.
Joseph Myers [Wed, 7 Oct 2015 16:10:59 +0000 (16:10 +0000)]
Fix ldbl-128 lrintl, lroundl missing exceptions for 32-bit long (bug 19085).
The ldbl-128 implementations of lrintl and lroundl miss "invalid"
exceptions on systems with 32-bit long for arguments that overflow
long but have exponent below 48. This patch fixes this by rearranging
the sequence of tests in the code so the exponent < 48 case is only
used for exponents that don't overflow long.
Tested for mips64 (n32 and n64).
[BZ #19085]
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Move test for
exponent below 48 inside case for non-overflowing exponent.
* sysdeps/ieee754/ldbl-128/s_lroundl.c (__lroundl): Likewise.
Joseph Myers [Wed, 7 Oct 2015 00:43:08 +0000 (00:43 +0000)]
Use dbl-64/wordsize-64 for MIPS64.
This patch enables use of sysdeps/ieee754/dbl-64/wordsize-64 for
MIPS64 (both n64 and n32), removing a #error in one case now that case
has been tested and found to work.
Tested for mips64 (n64 and n32).
* sysdeps/mips/mips64/Implies: Use ieee754/dbl-64/wordsize-64.
* sysdeps/ieee754/dbl-64/wordsize-64/s_issignaling.c
(__issignaling) [HIGH_ORDER_BIT_IS_SET_FOR_SNAN]: Remove #error.
Joseph Myers [Wed, 7 Oct 2015 00:40:12 +0000 (00:40 +0000)]
Don't use dbl-64/wordsize-64 lround based on llround for ILP32 (bug 19079).
The implementation of lround in dbl-64/wordsize-64 as an alias or
wrapper for llround is always incorrect when long is not 64-bit,
because it misses required exceptions in overflow cases, as shown by
my recently added tests. This patch removes that alias / wrapper in
the non-LP64 case, together with the REGISTER_CAST_INT32_TO_INT64
macro, restoring the previous version of lround for dbl-64/wordsize-64
(newly conditioned on !_LP64).
Tested for x86_64, and for mips64 with use of dbl-64/wordsize-64
enabled.
[BZ #19079]
* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Restore previous
file, conditioned on [!_LP64].
* sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c
[!_LP64] (__lround): Do not define as function or alias.
[!_LP64] (lround): Likewise.
[!_LP64] (__lroundl): Likewise.
[!_LP64] (lroundl): Likewise.
* sysdeps/tile/sysdep.h (REGISTER_CAST_INT32_TO_INT64): Remove
macro.
* sysdeps/x86_64/x32/sysdep.h (REGISTER_CAST_INT32_TO_INT64):
Likewise.
Joseph Myers [Tue, 6 Oct 2015 22:41:49 +0000 (22:41 +0000)]
Add more tests of lrint, llrint, lround, llround.
This patch adds more tests of lrint, llrint, lround and llround, to
cover various standard special cases not previously covered, and more
tests of overflow.
Joseph Myers [Tue, 6 Oct 2015 17:37:49 +0000 (17:37 +0000)]
Fix ldbl-128ibm expl overflow in non-default rounding modes (bug 19078).
The ldbl-128ibm expl wrapper checks the argument to determine when to
call __kernel_standard_l, thereby overriding overflowing results from
__ieee754_expl that could otherwise (given appropriately patched
libgcc) be correct for the rounding mode. This patch changes it to
check the result of __ieee754_expl instead, as other versions of this
wrapper do.
Tested for powerpc.
[BZ #19078]
* sysdeps/ieee754/ldbl-128ibm/w_expl.c (o_thres): Remove variable.
(u_thres): Likewise.
(__expl): Determine whether to call __kernel_standard_l based on
value of result, not argument.
Joseph Myers [Tue, 6 Oct 2015 15:57:31 +0000 (15:57 +0000)]
Add more scalb test expectations for "inexact" exception.
This patch adds more libm-test.inc expectations for the "inexact"
exception for scalb, in all cases except those with a non-integer
second argument (where results are unspecified by POSIX, so the
function does not count as fully determined and the spurious "inexact"
exceptions raised by the existing implementations alongside "invalid"
are OK).
Tested for x86_64 and x86.
* math/libm-test.inc (scalb_test_data): Add more expectations for
the "inexact" exception.
Joseph Myers [Tue, 6 Oct 2015 15:32:06 +0000 (15:32 +0000)]
Fix ldbl-128ibm logl (1) sign of zero result (bug 19077).
The ldbl-128ibm implementation of logl produces a zero with the wrong
sign for logl (1) in FE_DOWNWARD mode. This patch makes it explicitly
return 0.0L in that case, as in e.g. the ldbl-128 implementation.
Tested for powerpc.
[BZ #19077]
* sysdeps/ieee754/ldbl-128ibm/e_logl.c (__ieee754_logl): Return
0.0L for argument 1.0L.
Joseph Myers [Tue, 6 Oct 2015 15:14:26 +0000 (15:14 +0000)]
Fix ldbl-128ibm log1pl (-1) sign of infinity (bug 19076).
The ldbl-128ibm implementation of log1pl produces an infinity with the
wrong sign for log1pl (-1) in FE_DOWNWARD mode. This patch fixes this
by changing a division (-1.0L / (x - x)) (incorrect in FE_DOWNWARD
mode) to (-1.0L / 0.0L) (correct in all rounding modes).
Tested for powerpc.
[BZ #19076]
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c (__log1pl): Divide by
constant 0.0L when computing infinite result.
Joseph Myers [Mon, 5 Oct 2015 22:53:50 +0000 (22:53 +0000)]
Fix ldbl-96 lroundl just below powers of 2 (bug 19071).
The ldbl-96 version of lroundl is incorrect for systems with 64-bit
long when the argument's absolute value is just below a power of 2,
2^32 or more, and rounds up to the next integer; in such cases, it
returns 0. The problem is incrementing the high part of the mantissa
loses the high bit of the value (which is not an issue for any other
floating-point format, and is handled specially in lround when the bit
corresponding to 0.5 was in the high part rather than the low part).
This patch fixes this in a similar way to that used in llroundl:
storing the high part in an unsigned long variable before incrementing
it, so problems cannot occur in the case when this code is reachable.
I improved test coverage for both lround and llround by making them
use the same test inputs (appropriately conditioned on the size of
long in the lround case) - complete with the same comments, to make
comparison as easy as possible. (This test coverage improvement was
how I found the lroundl bug.)
Tested for x86_64 and x86.
[BZ #19071]
* sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Use unsigned
long int variable to store possibly incremented high part of
mantissa.
* math/libm-test.inc (lround_test_data): Add tests used for
llround. Use [LONG_MAX > 0x7fffffff] consistently as condition
for tests requiring 64-bit long. Do not condition tests on
[TEST_FLOAT] unnecessarily.
(llround_test_data): Add tests used for lround. Add another
expectation for the "inexact" exception. Do not condition tests
on [TEST_FLOAT] unnecessarily.
Joseph Myers [Mon, 5 Oct 2015 17:46:50 +0000 (17:46 +0000)]
Work around powerpc32 integer 0 converting to -0 (bug 887, bug 19049, bug 19050).
On powerpc32 hard-float, older processors (ones where fcfid is not
available for 32-bit code), GCC generates conversions from integers to
floating point that wrongly convert integer 0 to -0 instead of +0 in
FE_DOWNWARD mode. This in turn results in logb and a few other
functions wrongly returning -0 when they should return +0.
This patch works around this issue in glibc as I proposed in
<https://sourceware.org/ml/libc-alpha/2015-09/msg00728.html>, so that
the affected functions can be correct and the affected tests pass in
the absence of a GCC fix for this longstanding issue (GCC bug 67771 -
if fixed, of course we can put in GCC version conditionals, and
eventually phase out the workarounds). A new macro
FIX_INT_FP_CONVERT_ZERO is added in a new sysdeps header
fix-int-fp-convert-zero.h, and the powerpc32/fpu version of that
header defines the macro based on the results of a configure test for
whether such conversions use the fcfid instruction.
Tested for x86_64 (that installed stripped shared libraries are
unchanged by the patch) and powerpc (that HAVE_PPC_FCFID comes out to
0 as expected and that the relevant tests are fixed). Also tested a
build with GCC configured for -mcpu=power4 and verified that
HAVE_PPC_FCFID comes out to 1 in that case.
There are still some other issues to fix to get test-float and
test-double passing cleanly for older powerpc32 processors (apart from
the need for an ulps regeneration for powerpc). (test-ldouble will be
harder to get passing cleanly, but with a combination of selected
fixes to ldbl-128ibm code that don't involve significant performance
issues, allowing spurious underflow and inexact exceptions for that
format, and lots of XFAILing for the default case of unpatched libgcc,
it should be doable.)
[BZ #887]
[BZ #19049]
[BZ #19050]
* sysdeps/generic/fix-int-fp-convert-zero.h: New file.
* sysdeps/ieee754/dbl-64/e_log10.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log10): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/dbl-64/e_log2.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log2): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/dbl-64/s_erf.c: Include
<fix-int-fp-convert-zero.h>.
(__erfc): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/dbl-64/s_logb.c: Include
<fix-int-fp-convert-zero.h>.
(__logb): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/e_log10f.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log10f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/e_log2f.c: Include
<fix-int-fp-convert-zero.h>.
(__ieee754_log2f): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/s_erff.c: Include
<fix-int-fp-convert-zero.h>.
(__erfcf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/flt-32/s_logbf.c: Include
<fix-int-fp-convert-zero.h>.
(__logbf): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: Include
<fix-int-fp-convert-zero.h>.
(__erfcl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: Include
<fix-int-fp-convert-zero.h>.
(__logbl): Adjust signs as needed if FIX_INT_FP_CONVERT_ZERO.
* sysdeps/powerpc/powerpc32/fpu/configure.ac: New file.
* sysdeps/powerpc/powerpc32/fpu/configure: New generated file.
* sysdeps/powerpc/powerpc32/fpu/fix-int-fp-convert-zero.h: New
file.
* config.h.in [_LIBC] (HAVE_PPC_FCFID): New macro.
Joseph Myers [Fri, 2 Oct 2015 17:11:13 +0000 (17:11 +0000)]
Fix nexttoward overflow in non-default rounding modes (bug 19059).
ISO C requires overflowing results from nexttoward to be the
appropriate infinity independent of the rounding mode, but some
implementations use a rounding-mode-dependent result (this is the same
issue as was fixed for nextafter in bug 16677). This patch fixes the
problem by making the nexttoward implementations discard the result
from the floating-point computation that forced an overflow exception
and then return the infinity previously computed with integer
arithmetic.
Joseph Myers [Fri, 2 Oct 2015 11:14:19 +0000 (11:14 +0000)]
Fix i386 build after put*ent hardening changes.
The recent put*ent hardening changes broke the build for i386. i386
defines internal_function to __attribute__ ((regparm (3), stdcall)),
which affects type compatibility, so requiring internal_function to be
used consistently on declarations and definitions. This patch adds
internal_function to the definitions of the new functions using it on
their declarations.
Florian Weimer [Fri, 2 Oct 2015 09:34:13 +0000 (11:34 +0200)]
Harden putpwent, putgrent, putspent, putspent against injection [BZ #18724]
This prevents injection of ':' and '\n' into output functions which
use the NSS files database syntax. Critical fields (user/group names
and file system paths) are checked strictly. For backwards
compatibility, the GECOS field is rewritten instead.
The getent program is adjusted to use the put*ent functions in libc,
instead of local copies. This changes the behavior of getent if user
names start with '-' or '+'.
The file sysdeps/powerpc/sysdeps.h defines aliases for register operands,
which add the letter 'r' as a prefix to a register name. E.g.: register 20
can be written as 'r20', instead of '20'. On the one hand, this increases
readability, as it makes it easier for readers to know whether the operand is a
register or an immediate. On the other hand, this permits that immediate
operands be written as if they were registers, and vice-versa, thus reducing
the readability of the code.
This commit removes some of these unintentional misuses.
This commit also increases readability of the code by adding the prefix 'cr' to
some uses of the control register.
Both changes have no effect on the final code. Checked with objdump.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Remove or add register
prefix from operands.
The ldbl-128 / ldbl-128ibm implementation of lgamma has problems with
its handling of large arguments. It has an overflow threshold that is
correct only for ldbl-128, despite being used for both types - with
diagnostic control macros as a temporary measure to disable warnings
about that constant overflowing for ldbl-128ibm - and it has a
calculation that's roughly x * log(x) - x, resulting in overflows for
arguments that are roughly at most a factor 1/log(threshold) below the
overflow threshold.
This patch fixes both issues, using an overflow threshold appropriate
for the type in question and adding another case for large arguments
that avoids the possible intermediate overflow.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16347]
[BZ #19046]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c: Do not include
<libc-internal.h>.
(MAXLGM): Do not use diagnostic control macros.
[LDBL_MANT_DIG == 106] (MAXLGM): Change value to overflow
threshold for ldbl-128ibm.
(__ieee754_lgammal_r): For large arguments, multiply by log - 1
instead of multiplying by log then subtracting.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Thu, 1 Oct 2015 15:24:54 +0000 (15:24 +0000)]
Use type-specific precision when printing results in libm-test.inc.
When libm-test.inc prints the results of failing tests, the output can
be unhelpful for ldbl-128 and ldbl-128ibm because the precision used
is insufficient to distinguish values of those types, resulting in
reported values that look identical but differ by a large number of
ulps.
This patch changes it to use a precision appropriate for the type, for
both decimal and hex output (so output for float is more compact,
output for ldbl-128 and ldbl-128ibm is substantially wider). The
natural precision to use for decimal is given by the C11 <float.h>
macros such as FLT_DECIMAL_DIG. GCC's <float.h> only defines those in
C11 mode, so this patch uses the predefines such as
__FLT_DECIMAL_DIG__ (added in GCC 4.6) instead; if we move to building
with -std=gnu11 (or -std=gnu1x if we can't get rid of 4.6 support).
Tested for powerpc and mips64.
* math/libm-test.inc (TYPE_DECIMAL_DIG): New macro.
(TYPE_HEX_DIG): Likewise.
(print_float): Use TYPE_DECIMAL_DIG - 1 and TYPE_HEX_DIG - 1 as
precisions when printing floating-point numbers.
(check_float_internal): Likewise.
The ldbl-128ibm implementation of exp10l uses a version of log(10)
split into high and low parts - but the low part is negative, so
causing spurious overflows from __ieee754_expl (exp_high) in cases
close to the overflow threshold (I added relevant tests close to the
overflow threshold to the testsuite earlier today). The same issue
applies close to the underflow threshold as well (except that spurious
underflows in IBM long double arithmetic are harder to fix than the
other deficiencies, so we might end up permitting those for IBM long
double in the libm testsuite, as permitted by ISO C).
This patch fixes it to use a low part rounded downward to 48 bits
instead. (The choice of 48 instead of 53 bits is to make it more
obviously safe even when the low part of the argument is negative.)
Tested for powerpc. (Note that because of libgcc bugs with
multiplication very close to LDBL_MAX, libgcc also needs patching for
all the problem cases to be fixed, but this patch is still safe and
correct in the absence of such libgcc fixes.)
[BZ #16620]
* sysdeps/ieee754/ldbl-128ibm/e_exp10l.c (log10_high): Use value
of log (10) rounded downward to 48 bits.
(log10_low): Use corresponding low part of log (10).
The i386 versions of acoshf and acosh raise a spurious "invalid"
exception for an argument that is a quiet NaN with the sign bit set.
The integer arithmetic to detect arguments < 1 also detects -NaN, and
then the computation 0 / 0 in that case raises the exception. This
patch fixes this by using (x - x) / (x - x) as the computation in that
case instead, which will always raise the exception for non-NaN
arguments reaching that code, but not for quiet NaN arguments.
Tested for x86_64 and x86.
[BZ #19032]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): For arguments < 1,
compute result as (x - x) / (x - x) not as 0 / 0.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* math/libm-test.inc (acosh_test_data): Add another test of acosh.
Joseph Myers [Wed, 30 Sep 2015 18:06:02 +0000 (18:06 +0000)]
Improve test coverage of real libm functions [a-e]*.
This patch improves test coverage of the real libm functions [a-e]*,
ensuring that special cases and ranges of input values of potential
significance (such as close to overflow and underflow thresholds) are
more systematically covered.
This is a followup to
<https://sourceware.org/ml/libc-alpha/2013-12/msg00757.html> which
covered [a-c]* (however, I found more weaknesses in the coverage of
those functions when preparing this patch, hence the additional tests
being added for them here).
Addition of a test for acosh (-qNaN) is temporarily deferred, to be
included as part of a fix for bug 19032 which was discovered in the
course of adding these tests (and which illustrates the use of testing
-qNaN as well as +qNaN as input even to functions for which the sign
of a NaN isn't meant to be significant).
Joseph Myers [Wed, 30 Sep 2015 15:30:41 +0000 (15:30 +0000)]
Refine errno / "inexact" expectations in libm-test.inc.
This patch makes math/libm-test.inc more consistent regarding
including expectations for errno setting and "inexact" exceptions
where expected test results are given manually. Mostly this is a
matter of including ERRNO_UNCHANGED in expectations, but there are
also some cases where expectations regarding "inexact" were missing
for exactly determined functions (especially in cases where some other
exception was expected and it should also have been expected that
"inexact" was not set with that other exception), and one case for pow
where the NO_INEXACT_EXCEPTION expectation should not have been there
(the rule about not having "inexact" exceptions for NaN arguments is
only when those NaN arguments produce NaN results).
I deferred making such changes for complex functions and scalb.
Carlos O'Donell [Tue, 29 Sep 2015 15:32:36 +0000 (11:32 -0400)]
Files open O_WRONLY not supported in fallocate emulation.
In the posix_fallocate description in the manual we list various
drawbacks with the emulation, including the fact that a file opened
with O_APPEND fails with EBADF. Similarly a file opened with O_WRONLY
fails with EBADF. We must be able to emulate a compare-and-swap via
pread/compare/pwrite in order to make the emulation as safe as possible.
It is not acceptable to ignore the read failure because it could result
in significant data loss across all of the blocks. There is no other way
to make this work without a true atomic CAS and SIGBUS handler (which
is looking more attractive as a way to remove the race condition).
This patch adds O_WRONLY to the manual as another bullet to clarify the
limits of the emulation.
Joseph Myers [Mon, 28 Sep 2015 22:11:22 +0000 (22:11 +0000)]
Fix clog, clog10 inaccuracy (bug 19016).
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large
errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids
cancellation error and then using log1p.
However, the thresholds for using that approach still result in log
being used on argument as large as sqrt(13/16) > 0.9, leading to
significant errors, in some cases above the 9ulp maximum allowed in
glibc libm. This patch arranges for the approach using log1p to be
used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the
existing allowance for cases where one of X and Y is very small),
adjusting the __x2y2m1 functions to work with the wider range of
inputs. This way, log only gets used on arguments below sqrt(1/2) (or
substantially above 1), where the error involved is much less.
Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration
I removed the existing clog and clog10 ulps before regenerating to
allow any reduced ulps to appear. Tests added include those found by
random test generation to produce large ulps either before or after
the patch, and some found by trying inputs close to the (0.75, 0.5)
threshold where the potential errors from using log are largest.
[BZ #19016]
* sysdeps/generic/math_private.h (__x2y2m1f): Update comment to
allow more cases with X^2 + Y^2 >= 0.5.
* sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as
normal element in sum instead of special-casing based on values of
arguments.
* sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment.
* sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add
-1 as normal element in sum instead of special-casing based on
values of arguments.
* sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise.
* sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0]
(__x2y2m1): Update comment.
* sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1
as normal element in sum instead of special-casing based on values
of arguments.
* math/s_clog.c (__clog): Handle more cases using log1p without
hypot.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/auto-libm-test-in: Add more tests of clog and clog10.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Sat, 26 Sep 2015 00:27:06 +0000 (00:27 +0000)]
Fix powf inaccuracy (bug 18956).
The flt-32 version of powf can be inaccurate because of bugs in the
extra-precision calculation of (x-1)/(x+1) or (x-1.5)/(x+1.5) as part
of calculating log(x) with extra precision: a constant used (as part
of adding 1 or 1.5 through integer arithmetic) is incorrect, and then
the code fails to mask a computed high part before using it in
arithmetic that relies on s_h*t_h being exactly representable. This
patch fixes these bugs.
Tested for x86_64 and x86. x86_64 ulps for powf removed and
regenerated to reflect reduced ulps from the increased accuracy for
existing tests.
[BZ #18956]
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Add 0x00400000
not 0x0040000 for high bit of mantissa. Mask with 0xfffff000 when
extracting high part.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Joseph Myers [Fri, 25 Sep 2015 22:29:10 +0000 (22:29 +0000)]
Fix pow missing underflows (bug 18825).
Similar to various other bugs in this area, pow functions can fail to
raise the underflow exception when the result is tiny and inexact but
one or more low bits of the intermediate result that is scaled down
(or, in the i386 case, converted from a wider evaluation format) are
zero. This patch forces the exception in a similar way to previous
fixes, thereby concluding the fixes for known bugs with missing
underflow exceptions currently filed in Bugzilla.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18825]
* sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN):
New macro.
(DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
* sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN.
(__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of
DBL_NARROW_EVAL, reloading the PIC register as needed.
* sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN.
(__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of
FLT_NARROW_EVAL. Use separate return path for case when first
argument is NaN.
* sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the
PIC register.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use
math_check_force_underflow_nonneg.
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force
underflow for subnormal result.
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use
math_check_force_underflow_nonneg.
* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use
math_check_force_underflow.
* sysdeps/x86_64/fpu/x86_64-math-asm.h
(LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro.
* sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
This causes problems with passwd NSS tests because a UID-based lookup
will only retrieve one of those entries. The original version of
nss/bug17079.c detected this, but failed to use this information later
on.
Joseph Myers [Fri, 25 Sep 2015 17:30:56 +0000 (17:30 +0000)]
Use soft-fp fma for no-FPU ColdFire (bug 13304).
Systems without floating-point exceptions and rounding modes should
use the soft-fp versions of fmaf and fma, not the sysdeps/ieee754
versions that rely on setting rounding to zero and testing for the
"inexact" exception; this has been noted on
<https://sourceware.org/glibc/wiki/PortStatus> for some time. This
patch makes no-FPU ColdFire use the soft-fp files; sfp-machine.h is
made to include the nios2 version of sfp-machine.h which seems
sufficiently generic for 32-bit systems.
Joseph Myers [Fri, 25 Sep 2015 17:29:19 +0000 (17:29 +0000)]
Use soft-fp fma for MicroBlaze (bug 13304).
Systems without floating-point exceptions and rounding modes should
use the soft-fp versions of fmaf and fma, not the sysdeps/ieee754
versions that rely on setting rounding to zero and testing for the
"inexact" exception; this has been noted on
<https://sourceware.org/glibc/wiki/PortStatus> for some time. This
patch makes MicroBlaze use the soft-fp files; sfp-machine.h is made to
include the nios2 version of sfp-machine.h which seems sufficiently
generic for 32-bit systems.
Fix a regression introduced with commit 0d23a5c1 [Static dlopen
correction fallout fixes] that caused the default library search path to
be ignored for modules loaded with dlopen from static executables.
Joseph Myers [Thu, 24 Sep 2015 23:43:57 +0000 (23:43 +0000)]
Fix hypot missing underflows (bug 18803).
Similar to various other bugs in this area, hypot functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down (or, in the i386 case, converted from a wider evaluation format)
are zero. This patch forces the exception in a similar way to
previous fixes.
Note that this issue cannot arise for implementations of hypotf using
double (or wider) for intermediate evaluation (if hypotf should
underflow, that means the double square root is being computed of some
number of the form N*2^-298, for 0 < N < 2^46, which is exactly
represented as a double, and whatever the rounding mode such a square
root cannot have a mantissa with all zeroes after the initial 23
bits). Thus no changes are made to hypotf implementations in this
patch, only to hypot and hypotl.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18803]
* sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN.
(MO): New macro.
(__ieee754_hypot) [PIC]: Load PIC register.
(__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of
DBL_NARROW_EVAL.
* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use
math_check_force_underflow_nonneg in case where result might be
tiny.
* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
* math/auto-libm-test-in: Add more tests of hypot.
* math/auto-libm-test-out: Regenerated.
This patch refactors code in sysdeps/x86_64/fpu that forces underflow
exceptions and closely follows corresponding i386 code to use common
macros in x86_64-math-asm.h for that purpose. This is mainly about
keeping the code similar to the i386 code as far as possible, since
each macro apart from DEFINE_LDBL_MIN ends up used only once. It
would be possible to do a further refactoring to share these macros
between i386 and x86_64 (with i386 using the fcomip / fucomip versions
when building for i686 and above), but I have no immediate plans to do
so.
Tested for x86_64.
* sysdeps/x86_64/fpu/x86_64-math-asm.h: New file.
* sysdeps/x86_64/fpu/e_exp2l.S: Include <x86_64-math-asm.h>.
(ldbl_min): Replace with use of DEFINE_LDBL_MIN.
(__ieee754_exp2l): Use LDBL_CHECK_FORCE_UFLOW_NONNEG_NAN.
* sysdeps/x86_64/fpu/e_expl.S: Include <x86_64-math-asm.h>.
[!USE_AS_EXPM1L] (cmin): Replace with use of DEFINE_LDBL_MIN.
(IEEE754_EXPL): Use LDBL_CHECK_FORCE_UFLOW_NONNEG.
Joseph Myers [Thu, 24 Sep 2015 21:48:22 +0000 (21:48 +0000)]
Use LOAD_PIC_REG in i386 atanh.
sysdeps/i386/fpu/e_atanh.S, unlike all other functions in that
directory, loads the PIC register with its own code using
_GLOBAL_OFFSET_TABLE_, rather than with the LOAD_PIC_REG macro. I see
no good reason for the difference; this patch makes it use the common
macro.
Tested for x86.
* sysdeps/i386/fpu/e_atanh.S (__ieee754_atanh) [PIC]: Use
LOAD_PIC_REG.
This patch refactors code in sysdeps/i386/fpu that forces underflow
exceptions to use common macros for that purpose as far as possible.
(Although some of the macros end up used in only one place, I think
it's cleanest to define all these macros together so that all the code
forcing underflow uses such macros. Some more uses of such macros
will also be introduced when fixing remaining bugs about missing
underflow exceptions, and it would be possible to do further
refactoring of the macros in i386-math-asm.h to share more code by
using other macros internally. Places that test for underflow by
examining the representation of the argument with integer operations,
rather that using floating-point comparisons on the argument or
result, are unchanged by this patch.)
Most of this code uses a macro MO to abstract away the differences
between PIC and non-PIC memory references to constants. log1p
functions, however, hardcoded PIC conditionals for this. Because the
common macros rely on the use of MO, I changed the log1p functions to
use the normal style here, and, for consistency, also made that change
to log1pl which is otherwise unaffected by this patch.
Tested for x86.
* sysdeps/i386/fpu/i386-math-asm.h (DEFINE_LDBL_MIN): New macro.
(FLT_CHECK_FORCE_UFLOW): Likewise.
(DBL_CHECK_FORCE_UFLOW): Likewise.
(FLT_CHECK_FORCE_UFLOW_NARROW): Likewise.
(DBL_CHECK_FORCE_UFLOW_NARROW): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNEG_NAN): Likewise.
(FLT_CHECK_FORCE_UFLOW_NONNAN): Likewise.
(DBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
(FLT_CHECK_FORCE_UFLOW_NONNEG): Likewise.
(DBL_CHECK_FORCE_UFLOW_NONNEG): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNEG): Likewise.
* sysdeps/i386/fpu/e_asin.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_asin): Use DBL_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/e_asinf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_asinf): Use FLT_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/e_atan2.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_atan2): Use DBL_CHECK_FORCE_UFLOW_NARROW.
* sysdeps/i386/fpu/e_atan2f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_atan2f): Use FLT_CHECK_FORCE_UFLOW_NARROW.
* sysdeps/i386/fpu/e_atanh.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_atanh): Use DBL_CHECK_FORCE_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_atanhf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_atanhf): Use FLT_CHECK_FORCE_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_exp2l.S: Include <i386-math-asm.h>.
(ldbl_min): Replace with use of DEFINE_LDBL_MIN.
(__ieee754_exp2l): Use LDBL_CHECK_FORCE_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_expl.S: Include <i386-math-asm.h>.
[!USE_AS_EXPM1L] (cmin): Replace with use of DEFINE_LDBL_MIN.
(IEEE754_EXPL): Use LDBL_CHECK_FORCE_UFLOW_NONNEG.
* sysdeps/i386/fpu/s_atan.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__atan): Use DBL_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/s_atanf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__atanf): Use FLT_CHECK_FORCE_UFLOW.
* sysdeps/i386/fpu/s_expm1.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__expm1): Use DBL_CHECK_FORCE_UFLOW. Move underflow check after
main computation.
* sysdeps/i386/fpu/s_expm1f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__expm1f): Use FLT_CHECK_FORCE_UFLOW. Move underflow check after
main computation.
* sysdeps/i386/fpu/s_log1p.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(MO): New macro.
(__log1p): Use MO. Use DBL_CHECK_FORCE_UFLOW_NONNAN.
* sysdeps/i386/fpu/s_log1pf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(MO): New macro.
(__log1pf): Use MO. Use FLT_CHECK_FORCE_UFLOW_NONNAN.
* sysdeps/i386/fpu/s_log1pl.S (MO): New macro.
(__log1pl): Use MO.
The x86_64 fma4 version of pow fails to disable contraction of
operations other than those explicitly intended to use fma
instructions, so resulting in large ulps errors on processors with
fma4 instructions, as in bug 18104 (165ulp for the test added for that
bug; error originally reported by "blaaa" on #glibc). This patch adds
$(config-cflags-nofma) for e_pow-fma4.c, corresponding to the use for
e_pow.c in sysdeps/ieee754/dbl-64/Makefile.
Joseph Myers [Wed, 23 Sep 2015 22:52:13 +0000 (22:52 +0000)]
Don't use volatile in exp2f.
sysdeps/ieee754/flt-32/e_exp2f.c declares two variable as "static
const volatile float". Maybe this use of "volatile" was originally
intended to inhibit optimization of underflowing / overflowing
operations such as TWOM100 * TWOM100; in any case, it's not currently
needed, as given -frounding-math constant folding of such expressions
is properly disabled when it would be unsafe. This patch removes the
unnecessary use of "volatile".
Joseph Myers [Wed, 23 Sep 2015 22:42:30 +0000 (22:42 +0000)]
Refactor code forcing underflow exceptions.
Various floating-point functions have code to force underflow
exceptions if a tiny result was computed in a way that might not have
resulted in such exceptions even though the result is inexact. This
typically uses math_force_eval to ensure that the underflowing
expression is evaluated, but sometimes uses volatile.
This patch refactors such code to use three new macros
math_check_force_underflow, math_check_force_underflow_nonneg and
math_check_force_underflow_complex (which in turn use
math_force_eval). In the limited number of cases not suited to a
simple conversion to these macros, existing uses of volatile are
changed to use math_force_eval instead. The converted code does not
always execute exactly the same sequence of operations as the original
code, but the overall effects should be the same.
Joseph Myers [Wed, 23 Sep 2015 18:14:57 +0000 (18:14 +0000)]
Use math_narrow_eval more consistently.
Where glibc code needs to avoid excess range and precision in
floating-point arithmetic, code variously uses either asms or volatile
to force the results of that arithmetic to memory; mostly this is
conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint
functions some use of volatile is unconditional (and is present
unnecessarily in versions for long double). This patch make such code
use the recently-added math_narrow_eval macro consistently, removing
the unnecessary uses of volatile in long double lrint / llrint
implementations completely.
Mike Frysinger [Fri, 18 Sep 2015 18:00:05 +0000 (14:00 -0400)]
timezone: add a configure flag to disable program install
Some distros build+install the timezone tools (zic/zdump/tzselect) outside
of glibc and use the upstream package directly. Add a configure flag to
glibc so they can disable install of those tools.
This allows tests to run & pass regardless of the configure flag. Only
the install of them is impacted.
Joseph Myers [Fri, 18 Sep 2015 21:53:22 +0000 (21:53 +0000)]
Avoid excess range in results from i386 exp, hypot, pow functions (bug 18980).
i386 exp, hypot and pow functions can return overflowing and
underflowing values with excess range and precision; ; Wilco
Dijkstra's patches to make isfinite etc. expand inline cause this
pre-existing issue to result in test failures.
This patch fixes those functions to avoid excess range and precision
in their return values. Appropriate macros are added for the repeated
code sequences; in future I'll add more such macros and refactor
existing code forcing underflow (with or without also eliminating
excess range and precision from the return value) to use such macros.
Tested for x86. If, after this patch, you still see x86 libm test
failures with excess range or precision, please file bugs in Bugzilla.
[BZ #18980]
* sysdeps/i386/fpu/i386-math-asm.h (DEFINE_FLT_MIN): New macro.
(DEFINE_DBL_MIN): Likewise.
(FLT_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
(DBL_NARROW_EVAL_UFLOW_NONNEG_NAN): Likewise.
(FLT_NARROW_EVAL_UFLOW_NONNEG): Likewise.
(DBL_NARROW_EVAL_UFLOW_NONNEG): Likewise.
* sysdeps/i386/fpu/e_exp.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
(__exp_finite): Use DBL_NARROW_EVAL_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_exp10.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp10): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp10f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_exp10f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp2.S: Include <i386-math-asm.h>.
(dbl_min): Replace with use of DEFINE_DBL_MIN.
(__ieee754_exp2): Use DBL_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_exp2f.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_exp2f): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
* sysdeps/i386/fpu/e_expf.S: Include <i386-math-asm.h>.
(flt_min): Replace with use of DEFINE_FLT_MIN.
(__ieee754_expf): Use FLT_NARROW_EVAL_UFLOW_NONNEG_NAN.
(__expf_finite): Use FLT_NARROW_EVAL_UFLOW_NONNEG.
* sysdeps/i386/fpu/e_hypot.S: Include <i386-math-asm.h>.
(__ieee754_hypot): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_hypotf.S: Include <i386-math-asm.h>.
(__ieee754_hypotf): Use FLT_NARROW_EVAL.
* sysdeps/i386/fpu/e_pow.S: Include <i386-math-asm.h>.
(__ieee754_pow): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_powf.S: Include <i386-math-asm.h>.
(__ieee754_powf): Use FLT_NARROW_EVAL.
* sysdeps/i386/i686/fpu/multiarch/e_expf-sse2.S
(__ieee754_expf_sse2): Convert double-precision result to single
precision.
* sysdeps/i386/fpu/libm-test-ulps: Update.
Joseph Myers [Fri, 18 Sep 2015 20:34:59 +0000 (20:34 +0000)]
Avoid excess range in results from i386 scalb functions (bug 18981).
i386 scalb / scalbn / scalbln (and thus ldexp) functions for float and
double can return results with excess range (and consequently excess
precision for subnormal results). As the results of these functions
are fully determined by reference to IEEE 754 operations, this is
unambiguously a bug, apart from the testsuite failures it causes.
This patch makes those functions store their results on the stack and
load them back to eliminate the excess range. Double rounding is not
a problem, as the only cases where it could occur are when the result
overflows or underflows for extended precision, and then the
double-rounded results are the same as the single-rounded results.
The new macros will be used for more functions, more such macros
added, and existing code refactored to use such macros, in subsequent
patches.
Tested for x86. Committed.
[BZ #18981]
* sysdeps/i386/fpu/i386-math-asm.h: New file.
* sysdeps/i386/fpu/e_scalb.S: Include <i386-math-asm.h>.
(__ieee754_scalb): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/e_scalbf.S: Include <i386-math-asm.h>.
(__ieee754_scalbf): Use FLT_NARROW_EVAL.
* sysdeps/i386/fpu/s_scalbn.S: Include <i386-math-asm.h>.
(__scalbn): Use DBL_NARROW_EVAL.
* sysdeps/i386/fpu/s_scalbnf.S: Include <i386-math-asm.h>.
(__scalbnf): Use FLT_NARROW_EVAL.
Mike Frysinger [Fri, 18 Sep 2015 17:49:08 +0000 (13:49 -0400)]
timezone: fix parallel check failures
The XT testdata install rules expect the testdata dir to already exist in
the build tree, but it doesn't actually create it. Instead, it relies on
the build-testdata define happening to be executed before it (which runs
zic which creates the dir). When we run in parallel though, it's easy to
hit a failure:
$ cd timezone
$ rm -rf $objdir/timezone/testdata
$ make check -j
...
cp testdata/XT1 .../timezone/testdata/XT1
cp: cannot create regular file '.../timezone/testdata/XT1': No such file or directory
Makefile:116: recipe for target '.../timezone/testdata/XT1' failed
make: *** [.../timezone/testdata/XT1] Error 1
make: *** Waiting for unfinished jobs....
Joseph Myers [Fri, 18 Sep 2015 20:00:48 +0000 (20:00 +0000)]
Avoid excess range overflowing results from cosh, sinh, lgamma (bug 18980).
Various i386 libm functions return values with excess range and
precision; Wilco Dijkstra's patches to make isfinite etc. expand
inline cause this pre-existing issue to result in test failures (when
e.g. a result that overflows float but not long double gets counted as
overflowing for some purposes but not others).
This patch addresses those cases arising from functions defined in C,
adding a math_narrow_eval macro that forces values to memory to
eliminate excess precision if FLT_EVAL_METHOD indicates this is
needed, and is a no-op otherwise. I'll convert existing uses of
volatile and asm for this purpose to use the new macro later, once
i386 has clean test results again (which requires fixes for .S files
as well).
Since we now inline isinf, isnan and isfinite in math.h, replace uses of __isinf_ns(l/f)
with isinf, and remove the unused inlines __isinf_ns(l/f), __isnan(f) and __finite(f).
_longjmp_unwind:
movl $__pthread_cleanup_upto, %eax
testq %rax, %rax
je .L1
movq %rsp, %rsi
jmp __pthread_cleanup_upto
.L1:
rep ret
* sysdeps/nptl/jmp-unwind.c: Include <libc-lock.h> instead of
<nptl/pthreadP.h>.
(_longjmp_unwind): Use __libc_ptf_call.
* sysdeps/unix/sysv/linux/s390/jmp-unwind.c: Likewise.
David Lamparter [Sun, 12 Sep 2010 13:38:44 +0000 (09:38 -0400)]
arm: setjmp/longjmp: fix PIC vs SHARED thinkos
The logic in setjmp/__longjmp incorrectly uses "PIC" to figure out
whether the code is going into a shared library when it should be
using "SHARED". If you build glibc with a gcc version that has PIE
enabled by default, then the code will try to use symbols that are
only in the shared library.
Add inlining of the C99 math functions isinf/isnan/signbit/isfinite/isnormal/fpclassify using GCC
built-ins when available. Since going through the PLT is expensive for these small functions,
inlining results in major speedups (about 7x on Cortex-A57 for isinf). The GCC built-ins are not
correct if signalling NaN support is required, and thus are turned off in that case (see GCC bug
66462). The test-snan.c tests sNaNs and so must be explicitly built with -fsignaling-nans.
2015-09-18 Wilco Dijkstra <wdijkstr@arm.com>
[BZ #15367]
[BZ #17441]
* math/Makefile: Build test-snan.c with -fsignaling-nans.
* math/math.h (fpclassify): Use __builtin_fpclassify when
available. (signbit): Use __builtin_signbit(f/l).
(isfinite): Use__builtin_isfinite. (isnormal): Use
__builtin_isnormal. (isnan): Use __builtin_isnan.
(isinf): Use __builtin_isinf_sign.
Add a new benchmark for isinf/isnan/isnormal/isfinite/fpclassify. The test uses 2 arrays with 1024 doubles, one with 99% finite FP numbers (10% zeroes, 10% negative) and 1% inf/NaN, the other with 50% inf, and 50% Nan.
* benchtests/Makefile: Add bench-math-inlines, link with libm.
* benchtests/bench-math-inlines.c: New benchmark.
* benchtests/bench-util.h: New file.
* benchtests/bench-util.c: New file.
* benchtests/bench-skeleton.c: Add include of bench-util.c/h.
Carlos O'Donell [Fri, 18 Sep 2015 14:27:55 +0000 (10:27 -0400)]
Fix error messages in elf/tst-dlmopen1.c.
The test error messages incorrectly reference LIBC_SO
when they should reference the dlmopen'd library
tst-dlmopen1mod.so. Define TEST_SO and use it in
all the error messages.
Carlos O'Donell [Fri, 18 Sep 2015 13:27:45 +0000 (09:27 -0400)]
Use ALIGN_* macros in _dl_map_object_from_fd.
Cleanup _dl_map_object_from_fd to make it clear exactly
what we're doing with the mappings i.e. extending the the
start of the map down to a page boundary, extending the
end of the map up to a page boundary, and offset itself
also to page boundary. The result is much easier to read
as expected from the ALIGN_* cleanups.
Vincent Bernat [Thu, 17 Sep 2015 07:56:13 +0000 (09:56 +0200)]
time: in strptime(), make %z accept [+-]HH:MM tz [BZ #17887]
In ISO 8601, +03:30 is a valid time zone. Currently, strptime() only
parses it as a 2-digit time zone an believes this is +03:00. This change
makes it accept a single colon.
Mike Frysinger [Tue, 18 Aug 2015 13:23:44 +0000 (09:23 -0400)]
alpha: drop __ASSUME_FDATASYNC
Since we require a new enough kernel all the time, the __ASSUME_FDATASYNC
define has been hardcoded to 1. That means we can delete the alpha file
for fdatasync now and rely on the syscalls list like other ports.
Joseph Myers [Fri, 18 Sep 2015 00:52:07 +0000 (00:52 +0000)]
Test for weak undefined symbols in linknamespace.pl.
This patch makes linknamespace.pl require weak undefined symbols to be
within the standard namespace. (It remains the case that
linknamespace.pl does not look for definitions of such symbols or
require symbols used in those definitions to be within the standard
namespace.)
Tested for x86_64 and x86.
* conform/linknamespace.pl: Require weak undefined symbols to be
in the standard namespace.
(%strong_syms): Rename to %seen_syms.
(%strong_seen): Rename to %seen_where.
Joseph Myers [Thu, 17 Sep 2015 21:21:39 +0000 (21:21 +0000)]
Fix sign of zero part from ctan / ctanh when argument infinite (bug 17118).
C99/C11 Annex G specifies the sign of the zero part of the result of
ctan (x +/- i * Inf) and ctanh (+/-Inf + i * y). This patch fixes glibc
to follow that specification, along the lines I described in my review
of Andreas's previous patch for this issue
<https://sourceware.org/ml/libc-alpha/2014-08/msg00142.html>.
Tested for x86_64.
2015-09-17 Joseph Myers <joseph@codesourcery.com>
Andreas Schwab <schwab@suse.de>
[BZ #17118]
* math/s_ctan.c (__ctan): Determine sign of zero real part of
result when imaginary part of argument is infinite using sine and
cosine.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/s_ctanh.c (__ctanh): Determine sign of zero imaginary part
of result when real part of argument is infinite using sine and
cosine.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/libm-test.inc (ctan_test_data): Add more tests of ctan.
(ctanh_test_data): Add more tests of ctanh.
Joseph Myers [Thu, 17 Sep 2015 16:47:14 +0000 (16:47 +0000)]
Reduce number of constants in __finite* (bug 15384).
Bug 15384 notes that in __finite, two different constants are used
that could be the same constant (the result only depends on the
exponent of the floating-point representation), and that using the
same constant is better for architectures where constants need loading
from a constant pool. This patch implements that change.
Tested for x86_64, mips64 and powerpc.
[BZ #15384]
* sysdeps/ieee754/dbl-64/s_finite.c (FINITE): Use same constant as
bit-mask as in subtraction.
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c (__finite):
Likewise.
* sysdeps/ieee754/flt-32/s_finitef.c (FINITEF): Likewise.
* sysdeps/ieee754/ldbl-128/s_finitel.c (__finitel): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c (__finitel): Likewise.
Joseph Myers [Thu, 17 Sep 2015 15:51:54 +0000 (15:51 +0000)]
Fix tgamma missing underflows (bug 18951).
Similar to various other bugs in this area, tgamma functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down are zero. This patch forces the exception in a similar way to
previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18951]
* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force
underflow exception for small results.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
Likewise.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* math/auto-libm-test-in: Add more tests of tgamma.
* math/auto-libm-test-out: Regenerated.
Joseph Myers [Wed, 16 Sep 2015 22:04:40 +0000 (22:04 +0000)]
Don't declare float / long double Bessel functions for XSI POSIX (bug 18977).
The float and long double versions of Bessel function (j0f, y1l, etc.)
are not in POSIX; only the double versions are. This patch
accordingly limits the declarations of those functions to __USE_MISC,
and fixes the conform/ test expectations which matched the previous
incorrect declarations.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
Joseph Myers [Wed, 16 Sep 2015 21:11:00 +0000 (21:11 +0000)]
Make scalbn set errno (bug 6803).
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow. This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).
Notes:
* Where compat symbols were defined for scalbn functions, I didn't
change what they point to (to keep the patch minimal), so such
compat symbols continue to go directly to the non-errno-setting
functions.
* Mike, I didn't do anything with the IA64 versions of these
functions, where I think both the ldexp and scalbn functions already
deal with setting errno. As a cleanup (not needed to fix this bug)
however you might want to make those functions into aliases for
IA64; there is no need for them to be separate function
implementations at all.
* This concludes the fix for bug 6803 since the scalb and scalbln
cases of that bug were fixed some time ago.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6803]
* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
long_double_symbol calls.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
strong alias of __ldexpl.
(scalbnl): Define using long_double_symbol.
* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
Remove alias.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add errno expectations.
(scalbln_test_data): Add more errno expectations.
This way we do not
need to call the kernel just to get the port. Furthermore, we no
longer increase the reference count on every invocation of
`mach_host_self'.
* mach/mach/mach_traps.h (__mach_host_self, mach_host_self):
Protect declarations against the macro expansion.
* mach/mach_init.c (__mach_host_self_): New variable.
(mach_init): Initialize `__mach_host_self_'.
* mach/mach_init.h (__mach_host_self_): New declaration.
(__mach_host_self, mach_host_self): New macros.
* sysdeps/mach/hurd/dl-sysdep.c (_dl_sysdep_start_cleanup):
Release reference.
Joseph Myers [Wed, 16 Sep 2015 16:42:46 +0000 (16:42 +0000)]
Clean up ldbl-128 / ldbl-128ibm expm1l dead code (bug 16415).
The ldbl-128 and ldbl-128ibm expm1l implementations have code to
handle +Inf and finite arguments above an overflow threshold. Since
they now use __expl for large positive arguments to fix other
problems, this code is unreachable; this patch removes it.
Tested for mips64 and powerpc.
[BZ #16415]
* sysdeps/ieee754/ldbl-128/s_expm1l.c (maxlog): Remove variable.
(__expm1l): Remove code to handle positive infinity and overflow.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c (maxlog): Remove
variable.
(__expm1l): Remove code to handle positive infinity and overflow.