Joseph Myers [Tue, 6 Feb 2018 21:32:53 +0000 (21:32 +0000)]
Use xmalloc in tst-setcontext-fpscr.c (bug 19668).
Bug 19668 reports an unchecked malloc call in the test
sysdeps/powerpc/fpu/tst-setcontext-fpscr.c. This patch makes that
test use xmalloc. It does not otherwise move this test to the
support/ infrastructure or support/test-driver.c; the test has various
uses of exit and _exit on error cases, and uses atexit, and while I
think those things would all still work in the context of
test-driver.c, it's not an immediately obvious conversion the way it
would be for many tests that don't use test-driver.c.
Tested for powerpc.
[BZ #19668]
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: Include
<support/support.h>. Do not include <malloc.h>.
(query_auxv): Use xmalloc instead of malloc.
Joseph Myers [Tue, 6 Feb 2018 21:29:50 +0000 (21:29 +0000)]
Only define loff_t for __USE_MISC (bug 14553).
Bug 14553 reports that sys/types.h defines loff_t unconditionally,
despite it not being part of any supported standard. This is
permitted by the POSIX *_t reservation, but as a
quality-of-implementation issue it's still best not to define it
except for __USE_MISC. This patch conditions the definition
accordingly, updating a macro in sysdeps/unix/sysv/linux/sys/quota.h
to use __loff_t so it still works even if __USE_MISC is not defined.
codesearch.debian.net suggests there are quite a lot of loff_t uses
outside glibc, but it might well make sense to change all (few) uses
of loff_t or __loff_t inside glibc to use off64_t or __off64_t
instead, leaving only the definitions, treating this name as
obsolescent.
Tested for x86_64.
[BZ #14553]
* posix/sys/types.h (loff_t): Only define for [__USE_MISC].
* sysdeps/unix/sysv/linux/sys/quota.h (dqoff): Use __loff_t
instead of loff_t.
Zack Weinberg [Mon, 5 Feb 2018 19:42:29 +0000 (14:42 -0500)]
Remove getc and putc macros from the public stdio.h.
The getc and putc macros in the public stdio.h expand to call _IO_getc
and _IO_putc respectively. As _IO_getc, fgetc, and getc are all aliases
for the same function, and _IO_putc, fputc, and putc are also all aliases
for the same function, the macros are pointless. The C standard does
not require getc and putc to be macros, so let's just not have macros.
All four symbols are exported from libc.so at the same, ancient symbol
version, so there should be no risks for binary compatibility. Similarly,
the getchar and putchar inlines in bits/stdio.h forward to getc and putc
instead of their _IO_ aliases.
As a change from longstanding historical practice, this does seem
like it might break _something_, so there is a note in NEWS, which
is also a convenient place to advise people that if they thought getc
and putc had reduced per-character overhead they should consider using
getc_unlocked and putc_unlocked instead. (These are also not macros,
but when optimizing, they are inlines.)
* libio/stdio.h: Don't define getc or putc as macros.
* libio/bits/stdio.h (getchar, putchar): Use getc and putc,
not _IO_getc and _IO_putc.
Joseph Myers [Tue, 6 Feb 2018 00:37:17 +0000 (00:37 +0000)]
Add elf.h NT_* macros from Linux 4.15 (bug 14890).
Linux 4.15 adds NT_S390_RI_CB to linux/elf.h (and NT_ARM_SVE, which we
already have in glibc). This shows up that various other ELF note
values from linux/elf.h are missing from glibc's elf.h.
This patch adds the missing values that are relevant to glibc
architectures. As elf.h is a general description of the ELF format,
not necessarily limited to glibc configurations, there's an argument
for having the remaining NT_* values that Linux uses for non-glibc
architectures in glibc's elf.h as well, but this patch does not add
them.
Adding the NT_PRFPREG name is bug 14890. That bug also requests
making the NT_FPREGSET name obsolete. Given that elf.h is not just
for Linux but can describe ELF for other operating systems, I don't
think that a change of name in the Linux kernel is sufficient
justification for declaring the other name obsolete; there can be
multiple names for the same note value, even with incompatible
semantics, if those reflect variants of the ELF format in actual use.
For example, FreeBSD appears still to have the name NT_FPREGSET
<https://github.com/freebsd/freebsd/blob/master/sys/sys/elf_common.h>
(note: I haven't checked whether the FreeBSD kernel actually generates
such notes or whether this is actually an other-OS definition present
in FreeBSD's header).
Joseph Myers [Tue, 6 Feb 2018 00:36:14 +0000 (00:36 +0000)]
Add MAP_SYNC from Linux 4.15.
This patch adds the MAP_SYNC macro from Linux 4.15 to various
bits/mman.h headers. Note that this is *not* added to all
architectures: in Linux 4.15, this macro is only in
asm-generic/mman.h, and only some architectures' asm/mman.h include
the asm-generic file - the architectures not using the asm-generic
file will need their own values of MAP_SYNC allocated to support this
functionality (some of them also already have conflicting mmap flags
so the value there will have to be different from the generic
0x80000). Specifically, for glibc architectures, alpha hppa mips
powerpc sparc tile lack allocations of values for MAP_SYNC.
Keeping the buffers the same across test runs gives later invocations
the advantage since they access cached data. Reallocate so that all
test runs are on equal grounds.
* benchtests/bench-memcmp.c (do_test): Call realloc_buf for
every test run.
Joseph Myers [Thu, 1 Feb 2018 21:10:04 +0000 (21:10 +0000)]
Update syscall-names.list for 4.15.
This patch updates sysdeps/unix/sysv/linux/syscall-names.list for
Linux 4.15. There only appears to be one new syscall to add to the
list. (The riscv_flush_icache syscall is *not* added because for
whatever reason it doesn't appear in the uapi asm/unistd.h; only in
arch/riscv/include/uapi/asm/syscalls.h, which is only included by the
non-uapi asm/unistd.h - and only syscalls whose __NR_* macros are
defined in the uapi asm/unistd.h are relevant for this list.)
Tested for x86_64, and with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/syscall-names.list: Update kernel
version to 4.15.
(s390_sthyi): New syscall.
Joseph Myers [Thu, 1 Feb 2018 21:01:00 +0000 (21:01 +0000)]
Move LDBL_CLASSIFY_COMPAT to its own header.
The general rule in glibc is that it's better for a macro to be always
defined, and tested with #if, than for it to be tested with #ifdef,
because the latter is prone to typos in the macro name as well as to
the header with the macro accidentally not being included in a file
testing it. (Testing with an "if" statement is even better, in those
cases where it's possible to do things that way, as it then means both
cases in the code get checked for syntax in glibc builds with either
value of the condition.)
math_private.h has several different groups of macros, meaning that
architectures wanting to override some of them need to define those
then include the generic version, which then defines macros if not
already defined. It's hard to avoid that arrangement completely, but
various cases can be improved by splitting out macros or groups of
macros into separate files.
This patch splits out the LDBL_CLASSIFY_COMPAT macro into a separate
ldbl-classify-compat.h header. This macro is tested with #ifdef; this
patch changes it to testing with #if, with a default definition to 0
in the generic header and then architecture-specific headers defining
it to 1.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
* sysdeps/generic/ldbl-classify-compat.h: New file.
* sysdeps/arm/ldbl-classify-compat.h: Likewise.
* sysdeps/m68k/coldfire/ldbl-classify-compat.h: Likewise.
* sysdeps/microblaze/ldbl-classify-compat.h: Likewise.
* sysdeps/mips/ldbl-classify-compat.h: Likewise.
* sysdeps/nios2/ldbl-classify-compat.h: Likewise.
* sysdeps/sh/ldbl-classify-compat.h: Likewise.
* sysdeps/ieee754/dbl-64/s_finite.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/s_isinf.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/s_isnan.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Include
<ldbl-classify-compat.h>.
[LDBL_CLASSIFY_COMPAT]: Test value, not whether defined.
* sysdeps/arm/math_private.h (LDBL_CLASSIFY_COMPAT): Remove macro.
* sysdeps/mips/math_private.h (LDBL_CLASSIFY_COMPAT): Likewise.
* sysdeps/m68k/coldfire/math_private.h: Remove file.
* sysdeps/microblaze/math_private.h: Likewise.
* sysdeps/nios2/math_private.h: Likewise.
* sysdeps/sh/math_private.h: Likewise.
Joseph Myers [Thu, 1 Feb 2018 20:58:57 +0000 (20:58 +0000)]
Remove some math_private.h libc_feholdexcept_setround overrides.
math_private.h headers for configurations lacking support for
floating-point exceptions and rounding modes define
libc_feholdexcept_setround to override the default version with one
that discards its rounding mode argument.
Unlike other such libc_fe* macros that I removed, this one is actually
used for such configurations (in dbl-64/e_sqrt.c). However, this does
not make the macro required. It's only used for such configurations
with FE_TONEAREST as the rounding mode (anything needing another mode
should not be used when that mode is unavailable), and the default
definition just calls __feholdexcept and __fesetround. Since we now
have suitable inline do-nothing definitions of __feholdexcept and
__fesetround for the cases of no exceptions and rounding modes, we can
just rely on those inlines to achieve the same optimization as this
macro definition. Thus, this patch removes those macro definitions
(and the math_private.h headers containing them, when no longer needed
after that removal).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
Joseph Myers [Thu, 1 Feb 2018 20:57:22 +0000 (20:57 +0000)]
Remove some math_private.h libc_fe* overrides.
math_private.h headers for configurations lacking support for
floating-point exceptions and rounding modes define various libc_fe*
macros to override the default versions with ones that discard any
exception or rounding mode arguments.
Three of the four macros defined in these headers are no longer needed
there: those macros are only used in fma implementations that are not
used for such configurations, now all those configurations properly
use soft-fp fma implementations instead. (Effectively, those macros
were a workaround to allow glibc to build in the absence of a proper
fma implementation for this case - now there is such an
implementation, there is no need to support building the wrong
implementation for those configurations.) Thus, this patch removes
the unnecessary macros.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by the patch.
Joseph Myers [Thu, 1 Feb 2018 20:56:08 +0000 (20:56 +0000)]
Add feholdexcept inline in generic math_private.h.
Continuing the process of improving and cleaning up the handling of
configurations lacking support for floating-point exceptions and
rounding modes, this patch adds trivial inline definitions of
feholdexcept and __feholdexcept to the set of inlines for such
configurations in math_private.h. These inlines were missing from the
tile version used as a basis for the previous inlines, despite a few
such function calls ending up in libm.so.
Tested with build-many-glibcs.py. As expected, installed stripped
shared libraries are unchanged for architectures supporting exceptions
and rounding modes, but changed for architectures lacking such
support.
Joseph Myers [Thu, 1 Feb 2018 20:54:44 +0000 (20:54 +0000)]
Move fenv.h override inline functions to generic math_private.h.
The tile version of math_private.h defines some inline functions for
fenv.h functions, to optimize away internal calls to these functions
that do nothing given no support for floating-point exceptions and
rounding modes. (Some functions may have error cases for invalid
arguments, but those aren't applicable to the internal calls from
within glibc.) Other configurations lacking support for exceptions
and rounding modes lack such inline functions. This patch moves them
to the generic math_private.h, appropriately conditioned, so that all
such configurations can benefit from the.
include/fenv.h is made to check whether there are any non-default
rounding modes; that needs to be done there, rather than later,
because get-rounding-mode.h defines values for otherwise unsupported
FE_* rounding modes. It also gives an error for FE_TONEAREST
undefined, a case that already did not work for building the glibc
testsuite; the convention has by now been established that all
architectures need to provide a version of bits/fenv.h that at least
defines FE_TONEAREST.
Tested with build-many-glibcs.py. As expected, installed stripped
shared libraries are unchanged for tile and for architectures
supporting exceptions and rounding modes, but changed for non-tile
architectures not supporting exceptions and rounding modes that
previously lacked this optimization (e.g. Nios II libm.so is about 1kB
smaller).
The optimization is not in fact complete (does not cover feholdexcept
/ __feholdexcept, so a few calls to those remain unnecessarily within
libm even after this patch), but that can be dealt with separately.
Joseph Myers [Thu, 1 Feb 2018 20:52:59 +0000 (20:52 +0000)]
Move some fenv.h override macros to generic math_private.h.
Various configurations lacking support for floating-point exceptions
and rounding modes have a math_private.h that overrides certain
functions and macros, internal and external, to avoid references to
FE_* constants that are undefined in those configurations. For
example, there are unconditional feraiseexcept (FE_INVALID) calls in
generic libm code, and these macro definitions duly define
feraiseexcept to ignore its argument to avoid an error from FE_INVALID
being undefined.
In fact it is easy to tell in an architecture-independent way whether
this is needed, by testing whether FE_ALL_EXCEPT == 0. Thus, this
patch puts such a test, and feraiseexcept and __feraiseexcept macros,
in the generic math_private.h, so reducing the duplication between
architecture versions of this header. The feclearexcept macro present
in several versions of this header, and fetestexcept in the tile
version, are not needed; they would have been needed before there were
proper soft-fp fma implementations (when generic versions, that depend
on FE_TOWARDZERO and FE_INEXACT, were being used for configurations
not supporting those features), but aren't needed any more, and so are
removed.
The tile version of this header has several inline functions for
fenv.h functions to optimize calls to them away in such configurations
where they do nothing useful, and all these header versions also have
definitions of some of the libc_fe* internal macros. I intend to make
those generic in subsequent patches.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
Joseph Myers [Thu, 1 Feb 2018 20:50:00 +0000 (20:50 +0000)]
Add ColdFire math-tests.h.
Since I've been fixing build issues for ColdFire, this patch adds a
math-tests.h file for ColdFire, reflecting the lack of support for
exceptions and rounding modes for soft float. I think it is logically
correct, but have not tested it beyond build-many-glibcs.py for both
hard and soft float.
Joseph Myers [Thu, 1 Feb 2018 20:48:22 +0000 (20:48 +0000)]
Fix m68k bits/fenv.h for no-FPU ColdFire.
The m68k bits/fenv.h is in sysdeps/m68k/fpu/, meaning that no-FPU
ColdFire instead gets the generic (top-level) bits/fenv.h.
That top-level bits/fenv.h defines no rounding mode constants. That
no longer works for building glibc tests: some tests fail to build (at
least with warnings) if no rounding mode macros are defined, so at
least FE_TONEAREST must be defined in all cases (as various
architectures without rounding mode support indeed do), while
__FE_UNDEFINED must be defined in the case where not all the standard
rounding modes are supported.
On general principles of supporting multilib toolchains with a single
set of headers shared between multilibs for a given architecture, it's
also desirable for the same bits/fenv.h header to work for both FPU
and no-FPU configurations. Thus, this patch moves the m68k
bits/fenv.h to sysdeps/m68k/bits/fenv.h, and inserts appropriate
conditionals to handle the no-FPU case. All the exception macros, and
FE_NOMASK_ENV, are disabled in the no-FPU case; FE_ALL_EXCEPT is
defined to 0 in that case. All rounding modes except FE_TONEAREST are
disabled in that case, and __FE_UNDEFINED is defined accordingly. To
avoid an unnecessary ABI change, fenv_t is defined in the no-FPU case
to match the definition it would have got from the generic
bits/fenv.h.
This suffices to get a clean glibc and testsuite build for this
configuration with build-many-glibcs.py (and keeps a clean build for
the other m68k configurations); it has not been otherwise tested.
* sysdeps/m68k/fpu/bits/fenv.h: Move to ....
* sysdeps/m68k/bits/fenv.h: ... here.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_INEXACT): Do
not define.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_DIVBYZERO):
Likewise.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_UNDERFLOW):
Likewise.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_OVERFLOW):
Likewise.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_INVALID):
Likewise.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_ALL_EXCEPT):
Define to 0.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__]
(__FE_UNDEFINED): New enum constant.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_TOWARDZERO):
Do not define.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_DOWNWARD):
Likewise.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_UPWARD):
Likewise.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (fenv_t): Define
to match generic bits/fenv.h.
[!__HAVE_68881__ && !__HAVE_FPU__ && !__mcffpu__] (FE_NOMASK_ENV):
Do not define.
Joseph Myers [Thu, 1 Feb 2018 20:44:49 +0000 (20:44 +0000)]
Do not use packed structures in soft-fp.
Building for soft-float ColdFire produces an error in soft-fp:
In file included from ../sysdeps/ieee754/soft-fp/s_fmaf.c:42:
../soft-fp/single.h:85:3: error: 'packed' attribute ignored for field of type 'struct <anonymous>' [-Werror=attributes]
} bits __attribute__ ((packed));
^
While this error only appears in that particular case, this attribute
is in fact never useful, on any architecture. If you have
struct __attribute__ ((packed)) { ... } bits;
or
struct { ... } __attribute__ ((packed)) bits;
then the attribute affects the layout of the structure type. But with
the form used in this code
struct { ... } bits __attribute__ ((packed));
the field bits is being declared packed, but the layout of its type
has already been determined at that point. If on any platform the
layout of the sequence of bit-fields were wrong without the use of a
packed attribute, the attribute would need to be used via a definition
of _FP_STRUCT_LAYOUT, not in its present position.
So this patch removes the useless attribute to fix the build for
ColdFire soft-float. Tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* soft-fp/double.h (union _FP_UNION_D): Do not use attribute
packed on bits.
* soft-fp/extended.h (union _FP_UNION_E): Likewise.
* soft-fp/half.h (union _FP_UNION_H): Likewise.
* soft-fp/quad.h (union _FP_UNION_Q): Likewise.
* soft-fp/single.h (union _FP_UNION_S): Likewise.
Carlos O'Donell [Thu, 1 Feb 2018 20:40:48 +0000 (20:40 +0000)]
Fix -Os log1p, log1pf build (bug 21314).
As reported in bug 21314, building log1p and log1pf fails with -Os
because of a spurious -Wmaybe-uninitialized warning (reported there
for GCC 5 for MIPS, I see it also with GCC 7 for x86_64). This patch,
based on the patches in the bug, fixes this using the DIAG_* macros.
Tested for x86_64 with -Os that this eliminates those warnings and so
allows the build to progress further.
2018-02-01 Carlos O'Donell <carlos@redhat.com>
Ramin Seyed-Moussavi <lordrasmus@gmail.com>
Joseph Myers <joseph@codesourcery.com>
[BZ #21314]
* sysdeps/ieee754/dbl-64/s_log1p.c: Include <libc-diag.h>.
(__log1p): Disable -Wmaybe-uninitialized for -Os around
computation using c.
* sysdeps/ieee754/flt-32/s_log1pf.c: Include <libc-diag.h>.
(__log1pf): Disable -Wmaybe-uninitialized for -Os around
computation using c.
These tests require a new thread stack size set to a value (0x20000)
lower than the architecture minimum (0x30000). Set the stack size
to PTHREAD_STACK_MIN in this case.
Checked on ia64-linux-gnu.
* stdlib/test-atexit-race-common.c (do_test): Check stack size
against PTHREAD_STACK_MIN.
Rafal Luzynski [Thu, 1 Feb 2018 00:45:43 +0000 (01:45 +0100)]
NEWS: List the languages which use the alternative months.
[BZ #10871]
* NEWS: List the languages which actually use the alternative
months feature in this release. Also explain that "alt_mon" and
"ab_alt_mon" are optional.
Il'ya Malakhov [Wed, 31 Jan 2018 22:32:19 +0000 (14:32 -0800)]
crypt: Fix badsalttest test (Bug 22765)
The value of 'cd.initialized' is left uninitialized before the
first invocation of 'crypt_r ()' in this test despite the fact
that it should be set to zero according to the API.
Samuel Thibault [Mon, 29 Jan 2018 21:49:45 +0000 (22:49 +0100)]
malloc: Use assert.h's assert macro
This avoids assert definition conflicts if some of the headers used by
malloc.c happens to include assert.h. Malloc still needs a malloc-avoiding
implementation, which we get by redirecting __assert_fail to malloc's
__malloc_assert.
* malloc/malloc.c: Include <assert.h>.
(assert): Do not define.
[!defined NDEBUG] (__assert_fail): Define to __malloc_assert.
Samuel Thibault [Sun, 28 Jan 2018 22:30:15 +0000 (23:30 +0100)]
hurd: Add expected ABI lists
* hurd/Versions: Fix version when _hurd_exec_paths was added.
* mach/Versions: Fix version when __mach_host_self_ was added.
* sysdeps/mach/hurd/i386/ld.abilist: New file.
* sysdeps/mach/hurd/i386/libBrokenLocale.abilist: New file.
* sysdeps/mach/hurd/i386/libanl.abilist: New file.
* sysdeps/mach/hurd/i386/libc.abilist: New file.
* sysdeps/mach/hurd/i386/libcrypt.abilist: New file.
* sysdeps/mach/hurd/i386/libdl.abilist: New file.
* sysdeps/mach/hurd/i386/libm.abilist: New file.
* sysdeps/mach/hurd/i386/libnsl.abilist: New file.
* sysdeps/mach/hurd/i386/libresolv.abilist: New file.
* sysdeps/mach/hurd/i386/librt.abilist: New file.
* sysdeps/mach/hurd/i386/libutil.abilist: New file.
Palmer Dabbelt [Mon, 29 Jan 2018 18:30:24 +0000 (10:30 -0800)]
RISC-V: Build Infastructure
This patch lays out the top-level orginazition of the RISC-V port. It
contains all the Implies files as well as various other fragments of
build infastructure for the RISC-V port. This contains the only change
to a shared file: config.h.in.
RISC-V is a family of base ISAs with optional extensions. The base ISAs
are RV32I and RV64I, which are 32-bit and 64-bit integer-only ISAs, but
this port currently only supports RV64I based systems. Support for
RISC-V lives in in sysdeps/riscv. In addition to these ISAs, our glibc
port supports most of the currently-defined extensions: the A extension
for atomics, the M extension for multiplication, the C extension for
compressed instructions, and the F/D extensions for single/double
precision IEEE floating-point. Most of these extensions are handled by
GCC, but glibc defines various floating-point wrappers and emulation
routines as well as some atomic wrappers.
We support running glibc-based programs on Linux, the support for which
lives in sysdeps/unix/sysv/linux/riscv.
Palmer Dabbelt [Mon, 29 Jan 2018 18:29:57 +0000 (10:29 -0800)]
RISC-V: Add ABI Lists
I started with the aarch64 ABI lists and manually went through each
difference, ensuring that the missing entries had been deprecated along
the line. Darius generated the ulps files by running the test cases on QEMU.
Palmer Dabbelt [Mon, 29 Jan 2018 18:28:32 +0000 (10:28 -0800)]
RISC-V: Linux ABI
Linux-specific code that is required for maintaining ABI compatibility.
This doesn't contain the actual system call interface, that is split out
in order to avoid having a patch that's too big.
Palmer Dabbelt [Mon, 29 Jan 2018 18:27:17 +0000 (10:27 -0800)]
RISC-V: Atomic and Locking Routines
This patch implements various atomic and locking routines on RISC-V. We
mandate the A extension on Linux-capable RISC-V systems, so this can
rely on always having the various atomic instructions availiable.
Palmer Dabbelt [Mon, 29 Jan 2018 17:27:10 +0000 (09:27 -0800)]
RISC-V: Hard Float Support
This patch contains hardware floating-point support for the RISC-V ISA.
While we currently only support hard-float systems with both the F and D
extensions, I've left the F-specific code split out into seperate
folders in order to ease adding support for F-only and RV32I-based
systems in the future. I gave this a quick once-over and believe I've
removed all the code that implements RV32IF, RV32IFD, and RV64IF
targets.
Palmer Dabbelt [Mon, 29 Jan 2018 18:26:35 +0000 (10:26 -0800)]
RISC-V: Generic <math.h> and soft-fp Routines
This patch contains the miscellaneous math routines and headers we have
implemented for RISC-V. This includes things from <math.h> that aren't
completely ISA-generic, floating-point bit manipulation, and soft-fp
hooks.
Palmer Dabbelt [Mon, 29 Jan 2018 18:25:58 +0000 (10:25 -0800)]
RISC-V: Thread-Local Storage Support
This patch implements TLS support for RISC-V. We support all four
standard TLS addressing modes (LE, IE, LD, and GD) when running on
Linux via NPTL. There is a draft psABI document that defines our TLS
ABI here
This is meant to contain all the RISC-V code that needs to explicitly
name registers or manage in-memory structure layout. This does not
contain any of the Linux-specific code.
Palmer Dabbelt [Mon, 29 Jan 2018 18:25:23 +0000 (10:25 -0800)]
Add documentation for __riscv_flush_icache
This function is used by GCC to enforce ordering between data writes and
instruction fetches, and while we'd prefer that users rely on the GCC
intrinsic when possible this is user visible in case that's not
possible.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/platform.texi: Add RISC-V documenation for
__riscv_flush_icache.
Palmer Dabbelt [Thu, 25 Jan 2018 18:33:18 +0000 (10:33 -0800)]
sysdeps/init_array: Add PREINIT_FUNCTION to crti.S
The RISC-V port contains a crti.S that simply contains a link to
PREINIT_FUNCTION (when defined). As this should be entirely generic,
Joseph Myers suggested that we update the generic init_array version to
contain this. Since RISC-V is the only user of init_array this won't
break any existing ports.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* sysdeps/init_array/crti.S (.section .init_array): Add
PREINIT_FUNCTION when defined.
Joseph Myers [Mon, 29 Jan 2018 13:59:33 +0000 (13:59 +0000)]
Make build-many-glibcs.py clean git source directories.
With the git checkouts of Hurd components in build-many-glibcs.py
involving running autoreconf, there's a risk that generated files
could be left behind by an old autoreconf run (if an old version of
the sources generates those files in the source directory but a new
version does not).
This patch avoids that by using git clean -dxfq when updating git
checkouts. In this patch, that's conditional on --replace-sources, to
avoid removing any local not-checked-in files someone may have in
their checkout unless the option has been specifically passed that
says it's OK to blow old checkouts away, complete with any local
changes to them.
* scripts/build-many-glibcs.py (Context.git_checkout): Use git
clean -dxfq for git updates when replacing sources.
Joseph Myers [Mon, 29 Jan 2018 13:49:21 +0000 (13:49 +0000)]
Clean up build-many-glibcs.py libcilkrts disabling.
The disabling of libcilkrts in build-many-glibcs.py has some
peculiarities. It's only for the final GCC build, not the initial
bootstrap one, whereas normally anything disabled for the final build
should be disabled for the bootstrap one as well. And it's only for
Hurd, when it's more natural by analogy with the libsanitizer
disabling to disable this library unconditionally, not only for
targets where it's known to break. This patch cleans up that
disabling accordingly, adding a comment so it's obvious it can be
removed once GCC 7 is too old to build glibc.
* scripts/build-many-glibcs.py (Config.build_gcc): Use
--disable-libcilkrts unconditionally, not just for the final GCC
build for Hurd.
Rafal Luzynski [Tue, 5 Jan 2016 02:04:41 +0000 (03:04 +0100)]
ru_RU, ru_UA: Add alternative month names (bug 10871).
[BZ #10871]
* localedata/locales/ru_RU (mon): Rename to...
(alt_mon): This.
(abmon): Rename to...
(ab_alt_mon): This.
(mon): Import from CLDR (genitive case).
(abmon): Copy from the old content except the 5th month which is
now in the genitive case, even when abbreviated.
* localedata/locales/ru_UA: Likewise.
* time/tst-strptime.c (day_tests): Add an actual example of
a difference between %b and %Ob in Russian.
Samuel Thibault [Mon, 29 Jan 2018 00:48:24 +0000 (01:48 +0100)]
hurd: Fix includes
* sysdeps/mach/hurd/net/ethernet.h: Include <stdint.h>.
* sysdeps/mach/hurd/net/if_arp.h: Include <stdint.h>.
* sysdeps/mach/hurd/net/if_ppp.h: Do not include non-existing
<net/ppp_defs.h>.
Samuel Thibault [Sun, 28 Jan 2018 18:06:15 +0000 (19:06 +0100)]
hurd: Fix getifaddrs / freeifaddrs exposition
400669754de4 ('hurd: Fix nscd build') had the side effect of making
libc's freeaddrinfo expose freeifaddrs through __check_pf. We can just
move the renames to gai.c itself, along others.
* sysdeps/mach/hurd/check_pf.c (__getifaddrs, __freeifaddrs): Do not
define macros.
* nscd/gai.c (__getifaddrs): Define macro to getifaddrs.
(__freeifaddrs): Define macro to freeifaddrs.
Samuel Thibault [Sun, 28 Jan 2018 17:43:10 +0000 (18:43 +0100)]
hurd: take __USE_EXTERN_INLINES into account and restrict inlines
* hurd/hurd.h (__hurd_fail): Always declare function, and provide inline
version only if __USE_EXTERN_INLINES is defined.
* hurd/hurd/fd.h (_hurd_fd_error_signal, _hurd_fd_error, __hurd_dfail,
__hurd_sockfail): Likewise.
(_hurd_fd_get): Always declare functions, and provide inline versions
only if __USE_EXTERN_INLINES and _LIBC are defined and IS_IN(libc).
* hurd/hurd/port.h (_hurd_port_init, _hurd_port_locked_get,
_hurd_port_get, _hurd_port_free, _hurd_port_locked_set,
_hurd_port_set): Always declare functions, and provide inline versions
only if __USE_EXTERN_INLINES and _LIBC are defined and
IS_IN(libc).
* hurd/hurd/signal.h (_hurd_self_sigstate, _hurd_critical_section_lock,
_hurd_critical_section_unlock): Likewise.
* hurd/hurd/threadvar.h (__hurd_threadvar_location_from_sp,
* __hurd_threadvar_location): Likewise.
* hurd/hurd/userlink.h (_hurd_userlink_link, _hurd_userlink_unlink,
_hurd_userlink_clear): Likewise.
* mach/lock-intern.h (__spin_lock_init, __spin_lock, __mutex_lock,
__mutex_unlock, __mutex_trylock): Always declare functions, and provide
inline versions only if __USE_EXTERN_INLINES and _LIBC are defined.
* mach/mach/mig_support.h (__mig_strncpy): Likewise.
* sysdeps/generic/machine-lock.h (__spin_unlock, __spin_try_lock,
__spin_lock_locked): Likewise.
* sysdeps/mach/i386/machine-lock.h (__spin_unlock, __spin_try_lock,
__spin_lock_locked): Likewise.
* mach/spin-lock.c (__USE_EXTERN_INLINES): Define to 1.
* hurd/Versions (libc: GLIBC_2.27): Add _hurd_fd_error_signal,
_hurd_fd_error, __hurd_dfail, __hurd_sockfail, _hurd_port_locked_set,
__hurd_threadvar_location_from_sp, __hurd_threadvar_location,
_hurd_userlink_link, _hurd_userlink_unlink, _hurd_userlink_clear.